PC CARD CONNECTOR C TYPE
|
|
|
- Pauline Watkins
- 5 years ago
- Views:
Transcription
1 PC Card 1.27mm (.050") pitch PC CARD CONNECTOR C TYPE 68-circuit PC card connector, conforming to PCMCIA/JEIDA Ver.4.1 Features Conformity to PCMCIA (USA) and JEIDA Ver.4.1 (Japan) The ICM-C connector conforms to PCMCIA (USA) / JEIDA Ver.4.1 (Japan). Three type cards usable Type I cards, type II cards, and type III cards, can be used. Easy inspection and touch-up after reflow soldering The SMT type header is 0.635mm (.025") pitch, with single row solder tails positioned so that inspection and touch-up after reflow soldering is easy. Light weight and compact ejector The ejector is light and compact. It also provides a secure grounding circuit. The ICM connector C type is a 1.27mm (.050") pitch 68-circuit connector for IC memory cards. It is super thin and light - the ejector has a thickness of 7.0mm (.276"), and the combined weight of the header and ejector is only 22g (.049 lbs). Low insertion force and high contact reliability The socket's contact has two contact points. Because of this configuration, this connector requires low insertion forces and high contact reliability. We guarantee 10,000 mating cycles. Specifications Current rating: 0.5A AC, DC/line Temperature range: -40 C to +85 C (including temperature rise in applying electrical current) Contact resistance: Initial value/40mω max. After environmental testing/max. 20m Ω variation from initial value Withstanding voltage: 500V AC/minute Insulation resistance: 1,000MΩ min. (Initial) Mating/unmating life: 10,000 cycles * Contact JST for details. Standards Recognized file No. E Certified file No. LR20812
2 Socket Fig.1 3.3(.130) No.1 mark 46.45(1.829) 44.45(1.750) 0.5(.020) 2.75(.108) 1.3(.051) JST ICM-C68S-TS A 0.5(.020) 3.0(.118) 3.6(.142) 0.3(.012) 4.6(.181) Fig (.050) No.1 mark 46.45(1.829) 44.45(1.750) JST ICM-C68S-TS A 0.5(.020) 3.0(.118) 3.2(.126) 0.5(.020) 0.5(.020) 3.3(.130) 2.75(.108) 1.3(.051) 3.5(.138) 0.195(.008) Fig.3 3.3(.130) No.1 mark 46.45(1.829) 44.45(1.750) 0.5(.020) 2.75(.108) 1.3(.051) (.038) JST ICM-C68S-TS A Pin No (.010) 0.635(.025) (1.675) 3.0(.118) 0.4(.016) 2.6(.102) Circuits Figure 1 ICM-C68S-TS A Contact: Beryllium copper, nickel-undercoated ICM-C68S-TS A 3 ICM-C68S-TS A 360 Housing: PA6T, UL94V-0, black 11
3 Header/SMT type (For Type I Cards) Normal type 46.6(1.835) 42.5(1.675) 0.3(.012) 0.6(.025) 2.8(.110) N JST ICM-C68H-SS1A (.315) L 20.5(.807) 54.2(2.134) 60.0(2.362) 1.2(.047) 4.0(.157) 48.0(1.890) 0.44 (.017)dia. 1.4(.055) 3.5(.138) 1.0(.039) Dimension L Pin No. 1, 17, 34, 35, 51, 68 2 to 16, 18 to 33, 37 to 50, 52 to 66 36, 37 Dimensions mm(in.) 5.0 ± 0.1(.197 ±.004) 4.25 ± 0.1(.167 ±.004) 3.5 ± 0.1(.138 ±.004) Circuits 68 ICM-C68H-SS1A Contact: Phosphor bronze, nickel-undercoated Housing: PPS, UL94V-0, natural (brown) Reverse type 1.0(.039) 1.4(.055) 3.5(.138) 1.2(.047) 0.44 (.017) dia. 48.0(1.890) 4.0(.157) 60.0(2.362) 54.2(2.134) 2.8(.110) R JST ICM-C68H-SS1A (.025) (1.675) 46.6(1.835) 0.3(.012) 8.0(.315) L 20.5(.807) Dimension L Pin No. 1, 17, 34, 35, 51, 68 2 to 16, 18 to 33, 37 to 50, 52 to 66 Dimensions mm(in.) 5.0 ± 0.1(.197 ±.004) 4.25 ± 0.1(.167 ±.004) 36, ± 0.1(.138 ±.004) 12 Circuits 68 ICM-C68H-SS1A Contact: Phosphor bronze, nickel-undercoated Housing: PPS, UL94V-0, natural (brown)
4 Header/SMT type (For Type I Cards) Normal type 0.635(.025) 46.6(1.835) (1.675) 0.3(.012) 2.8(.110) N JST ICM-C68H-SS1A (.315) Solder tab L 20.5(.807) 52.0(2.047) 54.2(2.134) 60.0(2.362) 1.0(.039) 5.6(.220) 3.5(.138) 1.2(.047) 48.0(1.890) 0.44(.017)dia. 4.0(.157) 1.4 (.055) Dimension L Pin No. 1, 17, 34, 35, 51, 68 2 to 16, 18 to 33, 37 to 50, 52 to 66 36, 37 Dimensions mm(in.) 5.0 ± 0.1(.197 ±.004) 4.25 ± 0.1(.167 ±.004) 3.5 ± 0.1(.138 ±.004) Circuits Tab Without Contact: Phosphor bronze, nickel-undercoated ICM-C68H-SS1A With ICM-C68H-SS1A-4109T Housing: PPS, UL94V-0, natural (brown) Reverse type 5.6(.220) 1.0(.039) 3.5(.138) 1.2(.047) 0.44(.017)dia. 48.0(1.890) 1.4(.055) 4.0(.157) 60.0(2.362) 54.2(2.134) 52.0(2.047) Solder tab 2.8(.110) 0.635(.025) R JST ICM-C68H-SS1A (1.675) 46.6(1.835) 0.3(.012) 8.0(.315) L 20.5(.807) Dimension L Pin No. 1, 17, 34, 35, 51, 68 2 to 16, 18 to 33, 37 to 50, 52 to 66 36, 37 Dimensions mm(in.) 5.0 ± 0.1(.197 ±.004) 4.25 ± 0.1(.167 ±.004) 3.5 ± 0.1(.138 ±.004) Circuits Tab Without ICM-C68H-SS1A-4108 Contact: Phosphor bronze, nickel-undercoatede With ICM-C68H-SS1A-4108T Housing: PPS, UL94V-0, natural (brown) 13
5 Header/Through-hole type (For Type I Cards) Normal type 4.3(.169) 3.2(.126) L JST ICM-C68-SD (1.181) 3.0(.118) 13.0(.512) 10.0(.394) 23.0(.906) 0.48(.019) 49.2(1.937) 54.2(2.134) 58.0(2.283) 5.1(.201) 1.2(.047) 0.44 (.017) dia. 0.4(.016) 3.5(.138) 1.4(.055) Dimension L Pin No. 1, 17, 34, 35, 51, 68 2 to 16, 18 to 33, 37 to 50, 52 to 66 Dimensions mm(in.) 5.0 ± 0.1(.197 ±.004) 4.25 ± 0.1(.167 ±.004) 36, ± 0.1(.138 ±.004) Circuits 68 ICM-C68H-SD Contact: Phosphor bronze, nickel-undercoated Housing: PPS, UL94V-0, black 14
6 Header/SMT type (For Type III Cards) Normal type (Stand off 0mm) 0.635(.025) 46.6(1.835) (1.675) 0.3(.012) L 9.7(.382) 22.2(.874) 52.0(2.047) 54.2(2.134) 58.0(2.284) 47.6(1.874) 0.7(.028) Dimension L Pin No. 1, 17, 34, 35, 51, 68 2 to 16, 18 to 33, 37 to 50, 52 to 66 36, 37 Dimensions mm(in.) 5.0 ± 0.1(.197 ±.004) 4.25 ± 0.1(.167 ±.004) 3.5 ± 0.1(.138 ±.004) Circuits 68 ICM-C68H-S N1 120 Contact: Housing: Phosphor bronze, nickel-undercoated PA6T, UL94V-0,black Reverse type (Stand off 0mm) 0.7 (.028) 47.6(1.874) 58.0(2.284) 54.2(2.134) 52.0(2.047) (.382) L 22.2(.874) Dimension L Pin No. 1, 17, 34, 35, 51, 68 Dimensions mm(in.) 5.0 ± 0.1(.197 ±.004) 0.635(.025) (1.675) 46.6(1.835) 0.3(.012) 2 to 16, 18 to 33, 37 to 50, 52 to 66 36, ± 0.1(.167 ±.004) 3.5 ± 0.1(.138 ±.004) Circuits 68 ICM-C68H-S R1 120 Contact: Housing: Phosphor bronze, nickel-undercoated PA6T, UL94V-0,black 15
7 Header/SMT type (For Type IIICards) Normal type (Stand off 2.5mm(.098")) 0.635(.025) 46.6(1.835) (1.675) 0.3(.012) L 10.5(.413) 23.0(.906) 52.0(2.047) 54.2(2.134) 58.0(2.284) 8.0(.315) 1.0(.039) Dimension L Pin No. 1, 17, 34, 35, 51, 68 2 ~ 16, 18 ~ 33, 37 ~ 50, 52 ~ 66 36, 67 Dimensions min(in.) 5.0 ± 0.1(.197 ±.004) 4.25 ± 0.1(.167 ±.004) 3.5 ± 0.1(.138 ±.004) Circuits 68 ICM-C68H-S N1 90 Contact: Phosphor bronze, nickel-undercoated Housing: P46T, UL94V-0,black 16
8 Ejector/SMT type (For Type IIIcards) Right button (Stand off 0mm) Left button (Stand off 0mm) 5.6(.221) 62.5(2.461) 77.7(3.059) 62.5(2.461) 77.7(3.059) 3.5 (.138) 3.5(.138) 5.6 (.221) Right button Applicable header Right ICME-C68R-300H ICM-C68H-S N1 ICM-C68H-S R1 20 Rotating arm: Stainless Left button Applicable header Left ICME-C68L-300H ICM-C68H-S N1 ICM-C68H-S R1 20 Rotating arm: Stainless Right button Left button 17
9 Ejector/SMT type (For Type III cards) Right button (Stand off 2.5mm(.098")) Left button (Stand off 2.5mm(.098")) 62.5(2.461) 77.7(3.059) 62.5(2.461) 77.7(3.059) 8.0(.315) 3.5 (.138) 3.5(.138) 8.0 (.315) Right button Applicable header Right ICME-C68R-303H ICM-C68H-S N1 20 Rotating arm: Stainless Left button Applicable header Left ICME-C68L-303H ICM-C68H-S N1 20 Rotating arm: Stainless 18
10 Ejector mounted header/ Through-hole type (For Type III cards) Right button (Stand off 0mm) Normal Left button (Stand off 0mm) Normal Pin No (2.307) 52.1(2.051) Pin No (.130) 3.3(.130) 58.6(2.307) 52.1(2.051) Pin No (2.539) 82.9(3.264) 64.5(2.539) 82.9(3.264) 5.6(.221) 8.14 (.321) 8.14(.321) 5.6(.221) Right button Right ICME68H-R0-D1120NH - Contact: Housing: Phosphor bronze, nickel-undercoated PBT, UL94V-0 Rotating arm: Stainless Left button Left ICME68H-L0-D1120NH - Contact: Housing: Phosphor bronze, nickel-undercoated PBT, UL94V-0 Rotating arm: Stainless 19
11 Ejector mounted header/through-hole type (For Type III cards) Right button (Stand off 0mm) Reverse Left button (Stand off 0mm) Reverse Pin No (2.307) 52.1(2.051) Pin No (.130) 3.3 (.130) 58.6(2.307) 52.1(2.051) Pin No (2.539) 82.9(3.264) 5.6(.221) 5.6(.221) 8.14 (.321) 8.14 (.321) 64.5(2.539) 82.9(3.264) Right button Right ICME68H-R0-D1120RH - Contact: Housing: Phosphor bronze, nickel-undercoated PBT, UL94V-0 Rotating arm: Stainless Left button Left ICME68H-L0-D1120RH - Contact: Housing: Phosphor bronze, nickel-undercoated PBT, UL94V-0 Rotating arm: Stainless 20
12 Ejector mounted header/through-hole type (For Type III cards) Right button (Stand off 5mm(.197")) Normal Left button (Stand off 5mm(.197")) Normal 58.6(2.307) 52.1(2.051) 0.46(.018) Pin No (.130) 2.7 (.106) 10.5 (.413) 2.54 (.100) 2.54 (.100) 10.5 (.413) 2.7(.106) 3.3(.130) 58.6(2.307) 52.1(2.051) 0.46(.018) Pin No (2.539) 83(3.268) 64.5(2.539) 83(3.268) 10.5(.413) 3.5 (.138) 3.5(.138) 10.5(.413) Right button Right ICME68H-R0-D1121NH - Contact: Housing: Locator: Phosphor bronze, nickel-undercoated PBT, UL94V-0 PBT, UL94V-0 Rotating arm: Stainless Left button Left ICME68H-L0-D1121NH - Contact: Housing: Locator: Phosphor bronze, nickel-undercoated PBT, UL94V-0 PBT, UL94V-0 Rotating arm: Stainless Right button stand off 5mm(.197") Normal Left button stand off 5mm(.197") Normal 21
13 Ejector mounted header/ Through-hole type (For Type III cards) Right button (Stand off 5mm(.197")) Reverse Left button (Stand off 5mm(.197")) Reverse 58.6(2.307) 52.1(2.051) 0.46(.018) Pin No (2.539) 83(3.268) 3.3 (.130) 2.7(.106) 10.5 (.413) 2.54 (.100) 2.54 (.100) 10.5 (.413) 3.3(.130) 2.7(.106) 58.6(2.307) 52.1(2.051) 0.46(.018) Pin No (2.539) 83(3.268) 10.5(.413) 3.5 (.138) 3.5(.138) 10.5 (.413) Right button Right ICME68H-R0-D1121RH - Contact: Phosphor bronze, nickel-undercoated Housing: PBT, UL94V-0 Locator: PBT, UL94V-0 Rotating arm: Stainle Left button Left ICME68H-L0-D1121RH - Contact: Phosphor bronze, nickel-undercoated Housing: PBT, UL94V-0 Rotating arm: Stainle 22
14 Typical dimensions of PC card with PC card connector C type (for reference) For Type ICards For Type IICards 3.0(.118)min. 1.5(.059) 54.0 ± 0.1(2.126 ±.004) 46.45(1.829) 44.45(1.750) 3.3 ± 0.1 (.130 ± 0.04) 1.5(.059) 54.0 ± 0.1(2.126 ±.004) 46.45(1.829) 44.45(1.750) 3.3 ± 0.1 (.130 ±.004) 5.0(.197) Connector 10.0(.394)min. 5.0(.197) Connector 10.0(.394)min. Frame Frame 85.6 ± 0.2 (3.370 ±.008) 85.6 ± 0.2 (3.370 ±.008) 3.3 ± 0.2 (.130 ±.008) 2.5(.098)max. For Type IIICards 1.5(.059) 5.0(.197) Frame 54.0 ± 0.1 (2.126 ± 0.04 ) 46.45(1.829) 44.45(1.750) Connector 3.0min (.118) 85.6 ± 0.2 (3.370 ±.008 ) 8.0(.315)max (.413) 3.3 ± 0.1 (.130 ± 0.04 ) 2.5max (.098) 23
15 PC board layout (viewed from component side) Header/Through-hole type(for Type I,Icards) Header/SMT type(for Type I,Icards) (Refer to Note 3 below) No.1 No.2 No ± 0.1 (1.650 ±.004) 1.27 ± 0.05 (.050 ±.002) No ± 0.1 (.028 ±.004 )dia. No ± 0.05(.075 ±.002) ± 0.05(.075 ±.002) ± 0.05(.075 ±.002) No.34 No ± 0.05 (2.098 ±.002) 2.48 ± 0.05(.098 ±.002) ± 0.05 (1.675 ±.002) ± 0.05(.025 ±.002) 0.35 ± 0.035(.014 ±.001) 7.0 ± 0.05(.276 ±.002) 10.0 ± 0.05(.394 ±.002) 3.6(.142) 47.5 ± 0.05(1.870 ±.002) 56.0 ± 0.05(2.205 ±.002) PAD(68) Normal type: 0 ( Reverse type: ( (.087 Normal type: ( Reverse type: ( ( ± 0.05(.138 ±.002) Ejector(For Type ICards) (Refer to Note 4 below) Ejector(For Type ICards) (Refer to Note 5 below) ( dia. ( ± 0.05(.276 ±.002) 53.3 ± 0.05(2.098 ±.002) 2.48 ± 0.05(.098 ±.002) ± 0.05(1.675 ±.002) ± 0.05(.025 ±.002) 0.35 ± 0.035(.014 ±.001) ( dia.( )dia ( (.142) 47.5 ± 0.05(1.870 ±.002) 56.0 ± 0.05(2.205 ±.002) 57.2 ± 0.05 (2.252 ±.002) 68.0 ± 0.05(2.677 ±.002) PAD(68) ( (.098) 3.0(.118) 3.0(.118) 3.5 ± 0.05(.138 ±.002) 5.75(.226) 10.0 ± 0.05(.394 ±.002) 8.0 ± 0.05(.315 ±.002) 46.0 ± 0.05(1.811 ±.002) 7.0 ± 0.05(.276 ±.002) 34.3 ± 0.05(1.350 ±.002) ( (.354) 9.0(.354) 2.48 ± 0.05(.098 ±.002) ( ± 0.05 (2.098 ±.002) ± 0.05 (1.675 ±.002) 68.0 ± 0.05(2.677 ±.002) 56.0 ± 0.05(2.205 ±.002) ( ± 0.05 (.025 ±.002) 0.35 ± 0.035(.014 ±.001) ( (.142) 47.5 ± 0.05 (1.870 ±.002) 56.0 ± 0.05 (2.205 ±.002) PAD(68) ( ± 0.05(.138 ±.002) 10.0 ± 0.05(.394 ±.002) ( )dia. 9.0(.354) 9.0(.354) ( ± 0.05 (1.717 ±.002) 57.0 ± 0.05 (2.244 ±.002) Note: 1. The dimensions above should serve as a guideline. Contact JST for details. 2. Tolerances are non-cumulative:±0.05mm (±.002") for all centers. 3. This layout is applied to the headers Model Nos. ICM-C68H-SS1A-4103/-4104/-4108/ Regarding the layout for ICM-C68H-SS1A-4108T/-4109T, contact JST. 4. This layout is applied to the header ICM-C68H-SS1A Regarding the layout for ICM-C68H-SS1A-4104, contact JST. 5. This layout is applied to the header ICM-C68H-SS1A Regarding the layout for ICM-C68H-SS1A-4108T/-4109/-4109T, contact JST. 24
16 PC board layout (viewed from component side) SMT type/stand off 0mm Type IIICards (Refer to Note 3 below) (.087 ± 0.04 ± (.173 ± 0.02 ) 12.9 ± 0.05 (.508 ± 0.02 ) 3(.118) 52.1 ± ± 0.05 (1.675 ± 0.02 ) ± 0.05 (.025 ± 0.02 ) (.067 ± ± ± 0.05 (1.874 ± 0.02 ) (.053 ± ± 0.05 (2.051 ± 0.02 ) (2.142 ± 0.02 ) SMT type/stand off 2.5mm(.098") Type IIICards (Refer to Note 4 below) (.087 ± (.051 ± 0.04 ± (.118 ± 0.02 ) 14.3 ± ± 0.05 (.563 ± 0.02 ) (.063 ± 0.02 ) ± (.053 ± ± ± 0.05 (2.169 ± 0.02 ) (2.051 ± 0.02 ) ± (.087 ± ) NO ± ± 0.05 (2.051 ± 0.02 ) ± 0.1 (1.050 ± 0.04 ) (.050 ± 0.02 ) NO.35 (.681 ± 0.01 ) (.028 ± 0.02 ) 17.3 ± ± 0.05 NO ± 0.05 NO dia ± 0.05 (2.142 ± 0.02 ) (.035 ± 0.02 ) (.075 ± 0.02 ) ± 0.05 (.225 ± 0.02 ) ± 0.05 (2.54 ± 0.02 ) ± 0.05 (1.675 ± 0.02 ) (0.25 ± 0.02 ) 54.4 ± 0.05 (2.142 ± 0.02 ) 64.5 ± 0.05 (2.540 ± 0.02 ) 64.5 ± 0.05 (2.539 ± 0.02 ) ESD PAD(x2) ESD PAD(x2) 7.0(.276) 5.0 (.197) (.087 ± ± 0.05 (2.323 ± 0.02 ) 7.0(.276) (.087 ± (.197) 59.0 ± 0.05 (2.323 ± 0.02 ) Through-hole type/ Type IIICards ESD PAD(x2) 7.0(.276) (.087 ±0.04 ) 5.0 (.197) 59.0 ±0.05 (2.323 ±0.02 ) Note: 1. The dimensions above should serve as a guideline. Contact JST for details. 2. Tolerances are non-cumulative:±0.05mm (±.002") for all centers. 3. This layout is applied to the headers Model Nos. ICM-C68H-S N1/400R1 and to ejectors Model Nos. ICME -C68L-300H/C68R-300H. 4. This layout is applied to the header ICM-C68H-S N1 and to ejectors Model Nos. ICME-C68L-303H/C68R-303H. 5. This layout is applied to the ejector mounted headers Model Nos. ICME-68H-R0-D1120RH/L0-D1120RH/R0-P1121RH/L0-D1121RH. 25
CF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
FLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm
0.5mm (.020") pitch FLZ CONNECTOR Connectors for FFC and FPC Emboss Tape Features Zero insertion force mechanism ZIF mechanism increases wear resistance and extends the connector's mating life. Heat resistant
ZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
SM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.
Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove
EL CONNECTOR. Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. 4.5mm
Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the
CZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
PA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) Based upon wire-to-board crimp style PA connectors, the PA series family of connector have
CPTCONNECTOR. Board-to-wire. Features. Specifications
CPTCONNECTOR Board-to-wire Features Compact design.0mm pitch is realized miniaturization and low profile as the connector for automobile. Terminal construction Female terminal is designed for simple box
6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
KH SERIES. Features. JK series area by 20% compared with our JK series subminiature connectors. 6.18
D SUBMINIATURE CONNECTOR Right angle through-hole socket K SERIES RIGT ANGE TROUG-OE SOCKET 01 (with hexagonal lock screw blocks) (without lock screw blocks, but with grounding adapters having a inch thread)
ZH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.0") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Ultracompact, low profile design The ZH connector requires only about % of the installation space required by
Right angle through-hole plug and socket. Features circuits 25-circuits 9-circuits 25-circuits
D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug and socket RIGT ANGE TROUG-OE PUG AND SOCKET 01 Right angle through-hole plug (with hexagonal lock ) Right angle through-hole socket (without
EL CONNECTOR. Disconnectable Crimp style Wire-to-wire connectors. Features. Specifications. Standards. 4.5mm
Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style Wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the
KR FAMILY SERIES KRW KR PHN TR CONNECTOR
KR FAMILY SERIESKRWKRPHNTR CONNECTOR 2.0mm pitch/disconnectable Insulation displacement and Crimp style connectors PH connector: header (for PHN and KR receptacles) TR connector: Unit for wire-to-wire
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
CZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors CZ connector: Side entry header CZ connector:
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
JK SERIES. SUBMINIATURE CONNECTOR Crimp style plug and socket. Features. Standards. Specifications CRIMP STYLE PLUG AND SOCKET
D SUBMINIATURE CONNECTOR Crimp style plug and socket CRIMP STYLE PLUG AND SOCKET JK SERIES 01 Crimp style plug Crimp style socket Pin contact Socket contact Features The dimples in the shell provide the
PA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR 2.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) PAF Receptacle (IDC style) PA Shorouded header (Top entry type) PAF Receptacle (IDC style)
Distributed by: www.jameco.com 11 The content and copyrights of the attached material are the property of its owner. Crimp.mm (.1") pitch VH CONNECTOR Disconnectable Crimp style connectors Features Proven
USB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
PSI CONNECTOR. 1Certified LR R Specifications. Standards. 4.0mm pitch/disconnectable Crimp style connectors
PSI ONNETOR.0mm pitch/disconnectable rimp style connectors Wire-to-wire type Secure locking structure Mis-mating prevention mechanism by keying ( to circuits/ kinds of keying) Finger-friendly design Large
XH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
ITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
KR FAMILY SERIES/KRW KR PHN TR CONNECTOR
IDC mm (.") pitch KR FMILY SERIES/KRW KR PHN TR CONNECTOR Disconnectable Insulation displacement and Crimp style connectors Features MultiIDCharnesses are possible Various types of connectors In addition
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
ELCO Memory Card Components
ELCO Memory Card Components Table of Contents ELCO PCMCIA PC Memory Card Components Host Device Components Introduction... 3 Features & Benefits... 4 PC Memory Card Components Selection Guide...5 Host
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
USB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
J DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses to obtain
Universal MATE-N-LOK Headers for UMNL II Connectors
for UMNL II Connectors PC Board Vertical Pin Headers [6.5] Centerline spacing,, and 5 Circuit, In-Line Housing Nylon Flammability ating UL9V-0 Contacts Phosphor bronze Solder tail diameter.06 [1.57] elated
APPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE)
MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE) 560H SERIES FEATURES The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International
COMPONENT SPECIFICATION. PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE
PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Part Number
USB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
J DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses Costs
M20 and M22. (2.54mm and 2.00mm pitch)
M20 and M22 (2.54mm and 2.00mm pitch) M20 and M22 Connectors Great Design Flexibility Today s electronics and PCB designers are faced with many connector challenges, including applications with increased
0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector
0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 30 contacts: 5 locations
Dubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
Commercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
AMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
Elma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
PCI-SIG ENGINEERING CHANGE NOTICE
PCI-SIG ENGINEERING CHANGE NOTICE TITLE: Host Socket Recommendations DATE: Updated June 12, 2006 (Initial release April 10, 2006) AFFECTED DOCUMENT: PCI Express Mini Card, Half-Mini Card ECR (Content of
2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
PC Card Single Slot SMT Connectors for the AV Market (that Support 5 V Cards)
PC Card Single Slot SMT Connectors for the V Market (that Support 5 V Cards) IC15 Series Reliable card ejection 2-point card ejection Card ejection distance 6mm min Equipment outline Stroke: 11.7mm Ejection
XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
MEMORY CARD CONNECTORS (JEIDA CONFORMABLE)
MEMORY CARD CONNECTORS (JEIDA CONFORMABLE) 560H SERIES DRAM CARD CONFORMING TO Ver. 1 FEATURES These connectors conform to the Japan Electronic Industry Development Association (JEIDA) DRAM card Ver. 1.0
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
AMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
Introduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
MAXIMUM SOLUTIONS (2/14 -- PR606) Mill-Max Mfg. Corp. 190 Pine Hollow Road, Oyster Bay, NY Fax:
MAXIMUM SOLUTIONS Mill-Max Series 854 Single Row and 855 Double Row Pitch Surface Mount and Through-Hole Spring-Loaded Connectors and Mating Target Connectors Mill-Max has developed high density, (1,27
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
Connectors DIN 41612/IEC
Connectors DIN 41612/IEC 60603-2 and completions General information The DIN 41612/IEC 60603-2 connector family consists of 13 basic sizes and many complementary versions. It was developed for use in 19"
XSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
PGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
Memory Stick Connectors
Memory Stick Connectors CB1 Series Card Push Insert/Push Eject Card ejection distance of 1 mm Mounting height of mm Mounting area: Smaller design is 78% of former size Outline Receptacle
D-3100S Standard 1-Row Type
(Wire-to-Board, Wire-to-Panel and Wire-to-Wire) List of Products by Application Used for both signal circuit and power/power supply circuit applications. Able to carry 15A max. of current per position
XH5 SMT-compatible Connectors with a 1.27-mm Pitch
New Product Half-pitch SMT Connectors (oard to oard and oard to Cable Connectors) XH5 SMT-compatible Connectors with a -mm Pitch These SMT Connectors can be mounted on the back surfaces of circuit boards.
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
HCI Power Connector System
1 of 28 C Section TABLE OF CONTENTS page no. 1. OBJECTIVE... 1 2. SCOPE... 2 3. DRAWINGS AND APPLICABLE DOCUMENTS... 4 4. GENERAL CUSTOMER INFORMATION... 4 4.1 PRODUCT APPLICATION... 4 4.2 COMPATIBILITY...
1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
HAMBURG INDUSTRIES CO., LTD.
SPECIFICATION OF IC CARD ACCEPTOR Model No.: ICA-616 Revision: 1.1 Issue Date: OCT. 25, 2007 HAMBURG INDUSTRIES CO., LTD. 6FL., NO.12, Lane 270, SEC. 3, Pei Shen RD., Shen Keng Hsiang, Taipei Hsien, Taiwan
High-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
RJHS Series. RJ vistatm. EMI Quiet Modular Jacks with LED s. Specifications. Ordering Information EMI QUIET - WITH LEDS
EMI Quiet Modular Jacks with LED s is a family of EMI Quiet Modular Jack Connectors with built-in LEDs, meets Ethernet CAT 5 performance. This product is ideal for LAN applications such as adapter cards
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch)
High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) FH16 Series FH16 Series Variation 0.3mm pitch 60 contact 0.3mm pitch 80 contact 0.3mm pitch 90 contact 0.4mm pitch 80 contact 0.5mm pitch 50 contact
2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted
PRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality