ZH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
|
|
- Angelina Murphy
- 6 years ago
- Views:
Transcription
1 Crimp mm (.0") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Ultracompact, low profile design The ZH connector requires only about % of the installation space required by the standard JST.0mm (.0") pitch connector. Housing lances The contact retention lances on the resilient housing allow visual confirmation of contact lockin for easy and secure insertion. Reliable contact construction The dimple at the center of the contact ensures positive contact and low contact resistance at all times, even when the connector is subjected to vibration or distortion. Therefore this connector is ideal for use under low current, low voltage conditions. The ZH connector is very small with a mounting height of.mm (.0") and a thickness of only.mm (.1"). Contact retention lances on the housing make insertion easier, while the dimple at the center of the contact ensures reliable contact with the post. Distortion resistant construction The header is fully shrouded and thus protects the receptacle from damage that could be caused by mating the connectors at an angle or by otherwise mismating the connectors. Compatible with the ZR insulation displacement connectors The same shrouded header can be used for either the ZR IDCstyle connector or the ZH crimp style connector. This allows both s of connector to be used interchangeably without replacing the header. Specifications Current rating: 1.0 C, DC (WG #) Voltage rating: 0V C, DC Temperature range: C to + C (including temperature rise in applying electrical current) Contact resistance: Initial value/0m Ω max. fter environmental testing/0m Ω max. Insulation resistance: 00M Ω min. Withstanding voltage: 00V C/minute pplicable wire: WG # to # pplicable PC board thickness: 0. to 1.mm(.0" to.0") * Contact JST for details. Standards Recognized file No. E0 Certified file No. LR01 File No. R (conforms to DIN/VDE 0)
2 Contact.0(.1) (.0)(.0) 1. (.0) 1.1(.0) SZH00TP0. SZH00TP0. pplicable wire mm WG # Insulation O.D.mm(in.) 0.0 to 0.1 to 0. to 1.1(.01 to.0) 0.0 to 0.0 to 0. to 0.(.00 to.0) 1,000 1,000 Phosphor bronze, Tinplated 0.(.01) Housing 1.(.1).(.1) 0.(.01) 0.(.01) 1 1 ZHR ZHR ZHR ZHR ZHR ZHR ZHR ZHR ZHR ZHR ZHR1 ZHR1 1.(.) 1.0(.) Material bag Nylon, ULV0, natural(white)
3 Throughhole shrouded header The shrouded headers are interchangeable with those of the ZR insulation displacement connectors (see page 1). Top ( circuits) ( circuits or more). (.1). (.0). (.) 0. (.00)dia..(.1). (.0). (.) 1 1 Top ZR ZR ZR ZR ZR ZR ZR ZR ZR ZR 1ZR 1ZR S ZR S ZR S ZR S ZR S ZR S ZR S ZR S ZR SZR SZR S1ZR S1ZR 1.(.) 1.0(.) Top 00 box JST.(.0). (.).(.1) Pin: rass, copperundercoated, tin/leadplated Wafer: Glassfilled nylon, ULV0, natural (light gray) 0. (.00)dia. 1..(.) (.0) Throughhole PC board layout (viewed from soldering side) and ssembly layout Top ±0.0 (.0±.00 ) min.. (.1) ±0.0 (.0±.00 ) min..1(.0).min. (.0) 0.±0.0 (.0±.001 )dia..(.0). (.).(.) 0.±0.0 (.0±.001 )dia.. (.). (.1). (.) 1. Tolerances are noncumulative:±0.0mm(±.00" ) for all centers.. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
4 SMT shrouded header SM.0(.1) 1.0(.0) SM Top.0(.1).(.0) JST. (.1) 1.0(.0)dia. 0. (.0). (.1).0(.1).(.0) 1.0(.0). (.1) SM SM Top Top 1 1 S ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF SZRSMTF SZRSMTF S1ZRSMTF S1ZRSMTF 1.(.) 1.0(.) ZRSMTF ZRSMTF ZRSMTF ZRSMTF ZRSMTF ZRSMTF ZRSMTF ZRSMTF ZRSMTF ZRSMTF 1ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF S ZRSMTF SZRSMTF SZRSMTF S1ZRSMTF 1.(.) 1.0(.) The products listed above are supplied on embossedtape. Pin: rass, copperundercoated, tin/leadplated Wafer: Glassfilled nylon, ULV0, natural (ivory) SMT PC board layout (viewed from component side) SM (.0.00 )dia. x (No.of circuits 1) + 1. (.0x (No.of circuits 1) +.01 ± ± (.0) (.0 ±.00) (.0 ±.00). max..0 min. (.0) (.0) SM Top ±0.0 (.0±.00) 1.±0.1 (.01±.00) 0.min. (.0) ±0.1 (.0±.00) 0.(.0).±0.1 (.01±.00).0 (.0) ±0.0 1.± ±0.1 (.0±.00) (.0±.00) (.0±.00) 0.min. (.0) 1.±0.1 (.0±.00) 1.±0.1 (.0±.00). (.1) 1. Tolerances are noncumulative:±0.0mm(±.00" ) for all centers.. The dimensions above should serve as a guideline.contact JST for details.
5 Taping specifications [1.0(.1)dia.] W (W ) 0 ± (1. ±.0)dia..0 ± 0. (.0 ±.00) Tail tape 0.0 ()min Connector loaded area leader area Lead tape 0.0 ()min.0 (.0)min SM ( ) to circuits SM ( ) to circuits SM ( ) 1 to 1 circuits SM ( ) to 1 circuits ±0.0 (.01±.00)dia. (.1±.00).0±0.1 (.0±.00) 1.±0.1 (.0±.00) 0.±0.0 (.01±.00) ±0.0 (.01±.00)dia. (.1±.00).0±0.1 (.0±.00) 1.±0.1 (.0±.00) 0.±0.0 (.01±.00) (S) (.00) W±0.(.01) (.00) S±0.1(.00) W±0.(.01) 1.0 ±0.1 (. ±.00) 1.0 ±0.1 (. ±.00) SM (Top ) to circuits SM (Top ) to 1 circuits ±0.0 (.01±.00)dia. (.1±.00).0±0.1 (.0±.00) 1.±0.1 (.0±.00) 0.±0.0 (.01±.00) ±0.0 (.01±.00)dia. (.1±.00).0±0.1 (.0±.00) 1.±0.1 (.0±.00) 0.±0.0 (.01±.00) 1.0 ±0.1 (. ±.00) (.00) W±0.(.01) (S) 1.0±0.1 (.±.00) (.00) S±0.1(.00) W±0.(.01) SM Type Top SM Type to to 1 to 1 to to to 1 to to to 1 Taping dimensions mm(in.) Reel dimensions mm(in.) F S W W1 1(.) 1.(.).(.1) 1(.) 1.(.) 1(.) 1.(.).(.).(.).(1.).(.1).(.).(.).(1.).(.).(.).(1.) 1.0(.0).0(.).0(1.0) 1.0(.) 1.0(.0).0(.).0(1.0) 1.0(.0).0(.).0(1.0) 1.(.).(1.00).(1.1) 1.(.1) 1.(.).(1.00).(1.1) 1.(.).(1.00).(1.1) Specifications conform to JIS C 00. The tape width, connector recess dimensions, etc. are determined by the number of circuits and external shape of the connector to be loaded.
ZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
More informationDistributed by: www.jameco.com 11 The content and copyrights of the attached material are the property of its owner. Crimp.mm (.1") pitch VH CONNECTOR Disconnectable Crimp style connectors Features Proven
More informationFLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm
0.5mm (.020") pitch FLZ CONNECTOR Connectors for FFC and FPC Emboss Tape Features Zero insertion force mechanism ZIF mechanism increases wear resistance and extends the connector's mating life. Heat resistant
More informationKR FAMILY SERIES/KRW KR PHN TR CONNECTOR
IDC mm (.") pitch KR FMILY SERIES/KRW KR PHN TR CONNECTOR Disconnectable Insulation displacement and Crimp style connectors Features MultiIDCharnesses are possible Various types of connectors In addition
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
More informationEL CONNECTOR. Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. 4.5mm
Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the
More information6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
More information1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More informationSM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.
Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove
More informationRX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
More informationEL CONNECTOR. Disconnectable Crimp style Wire-to-wire connectors. Features. Specifications. Standards. 4.5mm
Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style Wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the
More informationCZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
More informationKR FAMILY SERIES KRW KR PHN TR CONNECTOR
KR FAMILY SERIESKRWKRPHNTR CONNECTOR 2.0mm pitch/disconnectable Insulation displacement and Crimp style connectors PH connector: header (for PHN and KR receptacles) TR connector: Unit for wire-to-wire
More informationPA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR 2.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) PAF Receptacle (IDC style) PA Shorouded header (Top entry type) PAF Receptacle (IDC style)
More informationCF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
More informationCZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors CZ connector: Side entry header CZ connector:
More informationPA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) Based upon wire-to-board crimp style PA connectors, the PA series family of connector have
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More informationPC CARD CONNECTOR C TYPE
PC Card 1.27mm (.050") pitch PC CARD CONNECTOR C TYPE 68-circuit PC card connector, conforming to PCMCIA/JEIDA Ver.4.1 Features Conformity to PCMCIA (USA) and JEIDA Ver.4.1 (Japan) The ICM-C connector
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationPSI CONNECTOR. 1Certified LR R Specifications. Standards. 4.0mm pitch/disconnectable Crimp style connectors
PSI ONNETOR.0mm pitch/disconnectable rimp style connectors Wire-to-wire type Secure locking structure Mis-mating prevention mechanism by keying ( to circuits/ kinds of keying) Finger-friendly design Large
More informationHEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS HEADERS & RECEPTACLES TE CONNECTIVITY (TE) 2.5mm,HDR,2pos,Vertical, Connector HPI
More information1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More informationPC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
More informationCF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
More informationM20 and M22. (2.54mm and 2.00mm pitch)
M20 and M22 (2.54mm and 2.00mm pitch) M20 and M22 Connectors Great Design Flexibility Today s electronics and PCB designers are faced with many connector challenges, including applications with increased
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationMilli-Grid 2.00mm (0.79 ) Pitch. Interconnect System for Complete Design Flexibility
Milli-Grid for Complete Design Flexibility Milli-Grid 50394, 87396 Crimp Terminal 5110, 78045 Receptacle Crimp Housing 87568 IDT Receptacle 87569 IDT Strain Relief 87831, 78246 Through-Hole 87832 SMT 87833,
More information.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
More informationES3 Series (WF2 Type) (culus Certified Product)
COMPONENTS PRODUCT INFORMATION NEW Board-to Cable Connector For LED Lighting Power Supply ES3 Series (WF2 Type) (culus Certified Product) CONNECTOR MB-0227-3 July 2012 RoHS Compliant Receptacle (ES3B002WF2)
More information0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
More informationJK SERIES. SUBMINIATURE CONNECTOR Crimp style plug and socket. Features. Standards. Specifications CRIMP STYLE PLUG AND SOCKET
D SUBMINIATURE CONNECTOR Crimp style plug and socket CRIMP STYLE PLUG AND SOCKET JK SERIES 01 Crimp style plug Crimp style socket Pin contact Socket contact Features The dimples in the shell provide the
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information(Smallest Circuit) Current Rating. (Largest Circuit) Housing Lock. Current Rating. 12A 11A Positive or None
General Overview The Jr. was specifically developed for positive locking, wire-to-wire and wire-to-board applications. It is available in single row and dual row versions. The system offers the widest
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More information343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationXSLS SERIES. Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) KEL CORPORATION
Ultra Fine Pitch (0.25mm), Ultra Low Profile (1.44mm) Connector for Micro Coaxial Cable (Stacking Type) XSLS SERIES KEL CORPORATION KEL CONNECTORS,INC KEL Taiwan Co., Ltd. KEL Shanghai Co.,Ltd. www.kel.jp
More informationArcher Connectors. Archer Kontrol. 1.27mm (.050") PITCH
rcher onnectors mm (.050") PITH The rcher range from Harwin is a series of mm (0.05 ) pitch connectors, offering single and double row options at half the P footprint of a 2.54mm (0.1 ) pitch connector.
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationDubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
More informationSEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationKH SERIES. Features. JK series area by 20% compared with our JK series subminiature connectors. 6.18
D SUBMINIATURE CONNECTOR Right angle through-hole socket K SERIES RIGT ANGE TROUG-OE SOCKET 01 (with hexagonal lock screw blocks) (without lock screw blocks, but with grounding adapters having a inch thread)
More informationMinitek Product Presentation
Minitek Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Markets & Applications 6. Marcomm Collaterals 2 Value Proposition
More information2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationJ DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses Costs
More information7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More informationRFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product ompliant to IN41612/IE603-2 Standard PN Series Pin Header Side Straight through hole type Receptacle Side Straight through hole PN10E- * *P-2.54S PN10E-* *S-2.54S PN10-* *S-2.54S PN10E-* *S-2.54S
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More informationRFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
More information1.25mm Pitch Miniature Crimping Connector
1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More information0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
More informationJ DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses to obtain
More information0.4 mm Contact Pitch, Board-to-FPC Connectors
.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H =.8 mm type) Molded structure Two-point contact system Nov.1.217 Copyright 217 HIROSE ELECTRIC CO., LTD. All Rights
More informationCOMPONENT SPECIFICATION. PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE
PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Part Number
More information0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationUniversal MATE-N-LOK Headers for UMNL II Connectors
for UMNL II Connectors PC Board Vertical Pin Headers [6.5] Centerline spacing,, and 5 Circuit, In-Line Housing Nylon Flammability ating UL9V-0 Contacts Phosphor bronze Solder tail diameter.06 [1.57] elated
More informationConnector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
More informationREMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS
REMOTE INPUT/ OUTPUT TERMINAL SYSTEM (RITS) CONNECTORS The e-con standard was developed in Japan in 2001 by a group of Japanese manufacturers in order to standardize connections from sensors to terminals.
More informationUSB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationPNI Connectors. 2.0mm pitch wire to board/wire to wire solutions. Purpose:
PNI Connectors 2.0mm pitch wire to board/wire to wire solutions Purpose: To introduce the PNI wire-to-board and wire-to-wire, crimp style connector from JST. Objectives: Illustrate the intended application.
More informationMinitek Pwr 4.2 BMI Product Presentation
BMI Product Presentation Basics Portfolio BMI Agenda Value Proposition Product Overview Product Specifications Features & Benefits Part Numbers Stacking Height Matrix Markets & Applications Collaterals
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
More informationRECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
More information2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
More informationUSB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
More informationRight angle through-hole plug and socket. Features circuits 25-circuits 9-circuits 25-circuits
D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug and socket RIGT ANGE TROUG-OE PUG AND SOCKET 01 Right angle through-hole plug (with hexagonal lock ) Right angle through-hole socket (without
More information2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The
More informationD-3100S Standard 1-Row Type
(Wire-to-Board, Wire-to-Panel and Wire-to-Wire) List of Products by Application Used for both signal circuit and power/power supply circuit applications. Able to carry 15A max. of current per position
More informationFOR CELLULAR PHONE; ULTRA LOW PROFILE TYPE FOR PORTABLE EQUIPMENT (0.5mm PITCH)
FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm PITCH) XR(3/5) SYSTEM CONNECTORS ULTR-LOW PROFILE TYPE (XR3) I/O CONNECTORS FOR PORTBLE EQUIPMENT (XR5) for portable equipment Receptacle
More informationThe 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.
Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Mini-Fit, CPI Compliant Pin Interface Headers FEATURES AND SPECIFICATIONS
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
More informationAMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationPRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
More informationQR/P4 SERIES. Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels
QR/P4 SERIES Small Rectangular Multi-electrode Solderless Connectors for Racks and Panels General QR/P4 Series is a series of small connectors for rack and panel application. This is a smaller-size version
More information