|
|
|
- Emily Hudson
- 5 years ago
- Views:
Transcription
1
2
3
4
5
6
7
8
9
10
11 5.1 SILICONE HOSE UNASSEMBLED TECHNICAL DATA Standard sizes Material DIN DN04 - DIN DN10 ISO DN10 - ISO DN50 Medium contacted: Hose: Silicone platinum cured Non medium contacted: Glass Silk Aramid (Keflar) Gasket Surface quality Tracability Media Operating temperature Operating pressure Applicable standards Certification Medium contacted: Hose: Internal surface Ra < 0,2µm Product contacted material marked with material no. and heat no. Gases and liquids Individual resistance: See technical specification. -40 C to +180 C at ambient pressure Other pressures: See technical specification. 0,3 to 16 bar at ambient temperature, pulsating pressure prohibited. Other temperatures: See technical specification. Dimensions are suiteable to LM-Biotech Sterile Hose-Connection bioplus Medium contacted: Hose: FDA confomity, USP-Class VI, TSE free 5.1 SILICONE HOSE UNASSEMBLED
![5.1 SILICONE HOSE UNASSEMBLED 5.1.1 TYPE SIS: SILICONE HOSE WITHOUT REINFORCEMENT orifice article no. bending roll temp. vacuum- radius [mm] length [m] material max.](/docs-images/92/109963460/images/12-3.jpg "resistance DIN 04 / SIS 5001 1004 0000 8000 30.00 50.00 160.00 none DIN 06 / SIS 5001 1006 0000 8000 50.00 50.00 160.00 none DIN 08 / SIS 5001 1008 0000 8000 60.00 50.00 160.00 none DIN 10 / SIS 5001 1010 0000 8000 0.")
12 5.1 SILICONE HOSE UNASSEMBLED TYPE SIS: SILICONE HOSE WITHOUT REINFORCEMENT orifice article no. bending roll temp. vacuum- radius [mm] length [m] material max. resistance DIN 04 / SIS none DIN 06 / SIS none DIN 08 / SIS none DIN 10 / SIS none ISO 10 / SIS none
13 5.1 SILICONE HOSE UNASSEMBLED TYPE SGB: SILICONE HOSE GLASS SILK REINFORCED orifice article no. max. working bending radius roll length temp. material vacuumresistance pressure [bar] [mm] [m] max. DIN 04 / SGB ,0/10, none DIN 06 / SGB / none DIN 08 / SGB /8, none DIN 10 / SGB / none ISO 10 / SGB / ISO 15 / SGB / ISO 25 / SGB /2,
![5.1 SILICONE HOSE UNASSEMBLED 5.1.3 TYPE SAB: SILICONE HOSE ARAMID REINFORCED orifice article no. max. working bending radius roll length temp. material vacuumresistance pressure [bar] [mm] [m] max.](/docs-images/92/109963460/images/14-3.jpg "DIN 10 / SAB 5003 1010 0000 8020 16.0/10.0 0.01 50.00 160.00 ISO 10 / SAB 5003 2010 0000 8020 16.0/10.0 80.00 50.00 160.00 650 ISO 15 / SAB 5003 2015 0000 8020 12.0/8.0 150.00 25.00 160.00 580 ISO 20 / SAB 5003 2020 0000 8020 10.")
14 5.1 SILICONE HOSE UNASSEMBLED TYPE SAB: SILICONE HOSE ARAMID REINFORCED orifice article no. max. working bending radius roll length temp. material vacuumresistance pressure [bar] [mm] [m] max. DIN 10 / SAB / ISO 10 / SAB / ISO 15 / SAB / ISO 20 / SAB / ISO 25 / SAB / ISO 32 / SAB / ISO 40 / SAB / ISO 50 / SAB /
15 5.1 SILICONE HOSE UNASSEMBLED TYPE SDA: SILICONE HOSE DOUBLE ARAMID REINFORCED orifice article no. max. working bending radius roll length temp. material vacuumresistance pressure [bar] [mm] [m] max. ISO 10 / 2xA / no collapse ISO 15 / 2xA / no collapse ISO 20 / 2xA / no collapse ISO 25 / 2xA / no collapse ISO 32 / 2xA / no collapse ISO 40 / 2xA / no collapse ISO 50 / 2xA / no collapse
16 5.2.1 SILICONE HOSE WITH ASEPTIC END ACCORDING DIN11864 TECHNICAL DATA Standard sizes Material DIN DN04 - DIN DN10 ISO DN10 - ISO DN50 Medium contacted: Hose: Silicone platinum cured BN2 (316L) Special materials e.g. Hastelloy, Titan, etc. on request Non medium contacted: or equivalent Gasket Surface quality Tracability Media Operating temperature Operating pressure Applicable standards Certification Medium contacted: Hose: Internal surface Ra < 0,2µm electro polished Ra < 0,6µm other qualities on request Non medium contacted: electro polished Ra > 1,6µm Product contacted material marked with material no. and heat no. Gases and liquids Pulsating pressure and permanent steam are prohibited. Type SIS: -40 C to +160 C at ambient pressure Type SGB/SAB/SDA: -40 C to +180 C at ambient pressure Other pressures: See technical specification. 0,3 to 16 bar at ambient temperature, pulsating pressure prohibited. Other temperatures: See technical specification Dimensions are suiteable to LM-Biotech Sterile Hose-Connection bioplus Medium contacted: EN / 3.1 Hose: FDA confomity, USP-Class VI, TSE free SILICONE HOSE WITH ASEKPTIC END ACCORDING DIN11864
17 5.2.1 SILICONE HOSE WITH ASEPTIC END ACCORDING DIN HOSE WITH ASEPTIC LINER ACCORDING DIN Orifice Article no. Length L [mm] DIN 04 / SIS * DIN 04 / SGB * DIN 06 / SIS * DIN 06 / SGB * DIN 08 / SIS * DIN 08 / SGB * DIN 10 / SGB * DIN 10 / SAB * ISO 10 / SIS * ISO 10 / SGB * ISO 10 / SAB * ISO 10 / 2xA * ISO 15 / SGB * ISO 15 / SAB * ISO 15 / 2xA * ISO 20 / SGB * ISO 20 / SAB * ISO 20 / 2xA * ISO 25 / SGB * ISO 25 / SAB * ISO 25 / 2xA * ISO 32 / SAB * ISO 32 / 2xA * ISO 40 / SAB * ISO 40 / 2xA * ISO 50 / SAB * ISO 50 / 2xA * * Please specify
18 5.2.1 SILICONE HOSE WITH ASEPTIC END ACCORDING DIN HOSE WITH ASEPTIC FLANGE MALE ACCORDING DIN Orifice Article no. Length L [mm] DIN 04 / SIS * DIN 04 / SGB * DIN 06 / SIS * DIN 06 / SGB * DIN 08 / SIS * DIN 08 / SGB * DIN 10 / SGB * DIN 10 / SAB * ISO 10 / SIS * ISO 10 / SGB * ISO 10 / SAB * ISO 10 / 2xA * ISO 15 / SGB * ISO 15 / SAB * ISO 15 / 2xA * ISO 20 / SGB * ISO 20 / SAB * ISO 20 / 2xA * ISO 25 / SGB * ISO 25 / SAB * ISO 25 / 2xA * ISO 32 / SAB * ISO 32 / 2xA * ISO 40 / SAB * ISO 40 / 2xA * ISO 50 / SAB * ISO 50 / 2xA * * Please specify
19 5.2.1 SILICONE HOSE WITH ASEPTIC END ACCORDING DIN HOSE WITH ASEPTIC FLANGE FEMALE ACCORDING DIN Orifice Article no. Length L [mm] DIN 04 / SIS * DIN 04 / SGB * DIN 06 / SIS * DIN 06 / SGB * DIN 08 / SIS * DIN 08 / SGB * DIN 10 / SGB * DIN 10 / SAB * ISO 10 / SIS * ISO 10 / SGB * ISO 10 / SAB * ISO 10 / 2xA * ISO 15 / SGB * ISO 15 / SAB * ISO 15 / 2xA * ISO 20 / SGB * ISO 20 / SAB * ISO 20 / 2xA * ISO 25 / SGB * ISO 25 / SAB * ISO 25 / 2xA * ISO 32 / SAB * ISO 32 / 2xA * ISO 40 / SAB * ISO 40 / 2xA * ISO 50 / SAB * ISO 50 / 2xA * * Please specify
20 5.2.1 SILICONE HOSE WITH ASEPTIC END ACCORDING DIN HOSE WITH ASEPTIC CLAMP FERRULE MALE ACCORDING DIN Orifice Article no. Length L [mm] DIN 04 / SIS * DIN 04 / SGB * DIN 06 / SIS * DIN 06 / SGB * DIN 08 / SIS * DIN 08 / SGB * DIN 10 / SGB * DIN 10 / SAB * ISO 10 / SIS * ISO 10 / SGB * ISO 10 / SAB * ISO 10 / 2xA * ISO 15 / SGB * ISO 15 / SAB * ISO 15 / 2xA * ISO 20 / SGB * ISO 20 / SAB * ISO 20 / 2xA * ISO 25 / SGB * ISO 25 / SAB * ISO 25 / 2xA * ISO 32 / SAB * ISO 32 / 2xA * ISO 40 / SAB * ISO 40 / 2xA * ISO 50 / SAB * ISO 50 / 2xA * * Please specify
21 5.2.1 SILICONE HOSE WITH ASEPTIC END ACCORDING DIN HOSE WITH ASEPTIC CLAMP FERRULE FEMALE ACCORDING DIN Orifice Article no. Length L [mm] DIN 04 / SIS * DIN 04 / SGB * DIN 06 / SIS * DIN 06 / SGB * DIN 08 / SIS * DIN 08 / SGB * DIN 10 / SGB * DIN 10 / SAB * ISO 10 / SIS * ISO 10 / SGB * ISO 10 / SAB * ISO 10 / 2xA * ISO 15 / SGB * ISO 15 / SAB * ISO 15 / 2xA * ISO 20 / SGB * ISO 20 / SAB * ISO 20 / 2xA * ISO 25 / SGB * ISO 25 / SAB * ISO 25 / 2xA * ISO 32 / SAB * ISO 32 / 2xA * ISO 40 / SAB * ISO 40 / 2xA * ISO 50 / SAB * ISO 50 / 2xA * * Please specify
Level sensor Magnetostrictive, high-resolution measuring principle Models FFG-P, FFG-T, FFG-TP, FLM-H
Level measurement Level sensor Magnetostrictive, high-resolution measuring principle Models FFG-P, FFG-T, FFG-TP, FLM-H KSR data sheet FFG-P, FFG-T, FFG-TP, FLM-H Applications High-accuracy level measurement
Adapter system for measuring instruments with G1 hygienic connection Model process adapter
Accessories Adapter system for measuring instruments with G1 hygienic connection Model 910.61 process adapter WIKA data sheet AC 09.20 Applications Food, beverage and pharmaceutical industry Cosmetics
Pressure transmitter/pressure switch PASCAL CS
Pressure transmitter/pressure switch PASCAL CS for food/pharmaceutical/biotechnology,type series CS2110 Features Multifunctional pressure transmitter/pressure switch Hygienic case with no notches or indentations
RTD insertion temperature probes
Data sheet 902350 Page 1/6 for temperatures from -50... +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measurement points Due to
Pressure transmitter/pressure switch PASCAL CS
Pressure transmitter/pressure switch PASCAL CS for food/pharmaceutical/biotechnology, Type series CS2110 Features Multifunctional pressure transmitter/pressure switch Hygienic case with no notches or indentations
Model VDL 115 Vacuum drying chambers for flammable solvents
Model VDL 115 Vacuum drying chambers for flammable solvents A BINDER safety vacuum drying oven of the VDL series ensures maximum safety when drying organic solvents standard with TÜV/GS. The inner chamber
Insertion RTD temperature probe
Data sheet 902350 Page 1/6 For temperatures between -50 and +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measuring points Due
Configurable Flexel Drum Bag
Configurable Flexel Drum Bag for LevMixer Magnetic Mixer 50 L 1,000 L Product Information The Flexel Drum Bag for LevMixer or Magnetic Mixer offers a single-use mixing solution utilizing an offcentered
selection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
Application The DA03 serves as indicator of differential. Follow mounting instructions in accordance to application.
DA03 Differential Pressure Gauge / Differential Pressure Gauge and Switch Models for Assignment in Explosion-hazardous Areas per Directive 94/9/EC (ATEX) Application The DA03 serves as indicator of differential
Model VD 23 Vacuum drying chambers for non-flammable solvents
Model VD 23 Vacuum drying chambers for non-flammable solvents A BINDER vacuum drying oven VD series gently dries materials with homogeneous temperature distribution. The patented expansion shelf technology
SANITRX Rupture Discs
SANITRX Rupture Discs 4-8803 SANITRX RUPTURE DISC The SANITRX* Rupture Disc is a semicircular-scored reverse acting rupture disc designed to provide instantaneous overpressure protection in sanitary environments.
bar Round (303S31) Round (303S31) Bright Drawn H9 Dia (in) Weight/m (Kg) Weight/m (Kg) Dia (in) 20mm
A World of Metal bar mm mm mm mm mm 7mm mm 9mm 0mm 0.0 0.0 0.0 0.0 0. 0. 0.9 0. 0. 0.0 0. 0.9 0.0 0.0 0. 0. 0.7 mm mm mm mm mm 7mm mm 0mm mm mm mm 0.9 0.99.0...9.7..00..7.9.0...0 (0S) Bright Drawn H9
NovAseptic Valve, DIAPHRAGM, EPDM
Specification Sheet NovAseptic Valve, DIAPHRAGM, EPDM Catalogue Number: NA#/22 Product Description Ø A The NovAseptic Valve is specifically designed for aseptic applications and complies with the most
Magnetic float switch For vertical installation Model FLS
Level measurement Magnetic float switch For vertical installation Model FLS WIKA data sheet LM 30.01 for further approvals see page 3 Applications Level measurement for almost all liquid media Pump and
DIN Molded Cable Assemblies
DIN 43650 Telephone (973) 586-500 FAX (973) 596-590 DIN 43650 8mm For Solenoid Valve Applications Black PVC Cable & Connector DUAL JUMPED GROUND PINS Molded cable assemblies can be mounted with cable exiting
Memosens measuring cable and installation accessories
Technical Information Memosens measuring cable and installation accessories CYK10 / CYK11 Application Measuring cable for all Memosens sensors and sensors with Memosens technology for nearly all parts
Float Switches with Permanent Magnet For Horizontal Installation Model HIF
Level Measurement Float Switches with Permanent Magnet For Horizontal Installation Model HIF WIKA Data Sheet LM 30.02 Applications Level measurement for almost all liquid media Pump/level control Chemical
Level sensor with reed measuring chain Model FLR, for the process industry
Level measurement Level sensor with reed measuring chain Model FLR, for the process industry WIKA data sheet LM 20.02 for further approvals see page 3 Applications Level measurement for almost all liquid
Level sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
Gas-actuated thermometer Stainless steel version Model 73
Temperature Gas-actuated thermometer Stainless steel version Model 73 WIKA data sheet TM 73.01 for further approvals see page 15 Applications General process instrumentation in the chemical and petrochemical
KF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Especially for forming joints with fixed pipelines or in certain cases between
5/2 and 5/3 Directional-control valves, Series TC 15, G 1/4
5/2 and 5/3 Directional-control valves, Series TC 15, G 1/4 Products 5/2 Directional-control valve, single valve, electrical connection M8 (4 poles) 5/3 Directional-control valve, single valve, electrical
Temperature measurement TER8 Front-flush and low-invasive resistance thermometers
Product highlights 3-A fulfillment without elastomers Front-flush or immersed types Accurate reading independent on ambient temperature Fast response time Hermetically sealed towards process Capable of
Float Switches with Permanent Magnet For Vertical Installation Model RSM
Level Measurement Float Switches with Permanent Magnet For Vertical Installation Model RSM WIKA Data Sheet LM 30.01 Applications Level measurement for almost all liquid media Pump/level control and monitoring
CombiTemp TFRN/TFRH. Operating instructions. Temperature sensor. Operating Instructions: EN.
EN/2017-04-03 Design and specifications subject to change without notice English page 1 8 Field of application CombiTemp TFRx is a temperature sensor, based on RTD technology, which is designed and produced
LS 5000 series Vibration Level Switch for liquids
Vibration Level Switch for liquids Set-up without adjustment Integrated fault monitoring Unaffected by product variations in density, conductivity, dielectric constant or viscosity Insensitive to foam,
Rosemount 1595 Conditioning Orifice Plate
Rosemount 1595 Conditioning Orifice Plate Ordering information Rosemount 1595 Conditioning Orifice combines a flow conditioner with an orifice plate into a highly accurate primary element. Requires only
Float switch For the process industry
Level measurement Float switch For the process industry Model FLS (models with E approval: 60, AL-ADF) KSR data sheet LM 30.01 for further approvals see page 3 Applications Level measurement for almost
OPTIFLUX 6000 Handbook
OPTIFLUX 6000 Handbook Electromagnetic flow sensor for hygienic and sanitary applications The documentation is only complete when used in combination with the relevant documentation for the signal converter.
Datasheet - ZS Z
Datasheet - ZS 236-11Z Position switch / 236 thermoplastic enclosure - DIN EN 50047 with Actuator / 236 Plunger S thermoplastic enclosure Good resistance to oil and petroleum spirit Wide range of alternative
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
Electronic pressure switch with display For sanitary applications Model PSA-31
Electronic pressure measurement Electronic pressure switch with display For sanitary applications Model PSA-31 WIKA data sheet PE 81.85 for further approvals see page 8 Applications Food and beverage industry
SENSOR MUT2200EL. Electromagnetic flowmeter. The electromagnetic flowmeter for all applications DS100-1-USA
SENSOR MUT2200EL Electromagnetic flowmeter The electromagnetic flowmeter for all applications DS100-1-USA Sensor MUT2200EL MUT2200EL sensors represent the state of the art of Euromag International production
HYGROPHIL-F, Moisture Analyzer, Type , -11, -12, -13 series A
HYGROPHIL-F, Moisture Analyzer, Type 5673-10, -11, -12, -13 series A Moisture Measurement in gases and liquids Combined moisture and temperature sensor Multiple channel analyzer, max. 3 sensors can be
Datasheet - ZR Z
Print - Create PDF - Create EXCEL file 21.04.2011-16:57:42h Datasheet - ZR 236-11Z Position switch / 236 thermoplastic enclosure - DIN EN 50047 with Actuator / 236 Roller plunger R thermoplastic enclosure
Stainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
Flow Measurement SITRANS F M
low sensor MAG P Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage
Flow Sensor SONOFLOW CO.55
Flow Sensor SONOFLOW CO.55 Operating Manual Device: Model: Type: Flow Sensor SONOFLOW CO.55 Manufacturer: SONOTEC Ultraschallsensorik Halle GmbH Nauendorfer Str. 2 06112 Halle (Saale), Germany Phone: +49
ANACONDA MULTIFLEX CONDUIT TYPE UI
ANACONDA MULTIFLEX CONDUIT TYPE UI Very robust, extremely flexible and corrosion resistant Multifl ex type UI is the stainless steel version of type UIG. Extremely fl exible and robust, this fully interlocked,
Technical Information Liquipoint FTW23
TI0202F/00/EN/04.6 736230 Products Solutions Services Technical Information Capacitance point level measurement Point level switch for liquids in the food and beverage industry Application The is a point
FUTURA BIOTECH RANGE
BIOTECH RANGE BIOTECH RANGE CONTENTS FUTURA Hardware Futura 3-9 Hubs 10-15 V350 Touch Screen Transmitters 16-22 Test Equipmet 23-25 FUTURA Software Free with Hardware 26-28 FUTURA Scada Software 27 FUTURA
Flow Measurement SITRANS F C
Overview Benefits It is compact and light, fitting neatly into dense piping arrangements Easy maintenance because modules can be exchanged rapidly Effective separation of measurement from plant vibration
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
Rosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual 00809-0100-4828, Rev BA Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before
Flow Measurement SITRANS F M
Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to
EnviZion TM Hygienic Diaphragm Valve
EnviZion TM Hygienic Diaphragm Valve Experience the Future with EnviZion The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability,
Level sensor for monitoring the level of liquid media
Level sensor MG Level sensor for monitoring the level of liquid media Characteristics Level sensor output 4 20mA or Resistance output in three-wire potentiometer circuit Temperature range: -30 C to 150
Float switch For industrial applications Model RLS-1000
Level measurement Float switch For industrial applications Model RLS-000 WIKA data sheet LM 50.0 Applications Level measurement of liquids in machine building Control and monitoring tasks for hydraulic
Partnering for Success. Pepperl+Fuchs and Honeywell Enhancing Performance and Transparency
Partnering for Success Pepperl+Fuchs and Honeywell Enhancing Performance and Transparency Honeywell Benefits Secure Remote Desktop Protocol (RDP) 8 connection tested, qualified, and preferred for the Honeywell
Datasheet - BNS ZG-ST
22.08.2014-04:52:01h Datasheet - BNS 300-01ZG-ST Safety sensors / BNS 300 Preferred typ thermoplastic enclosure Long life no mechanical wear Ø M30 Suitable for food processing industry Insensitive to transverse
Ordering details. Approval. Classification. Global Properties :27:33h. Solenoid interlock / AZM 161I / AZM 161I B6R
13.06.2016 05:27:33h Datasheet AZM 161SK 12/12RI 024 B6R Solenoid interlock / AZM 161I / AZM 161I B6R right hand model Compact design Interlock with protection against incorrect locking. For very smal
Pressure transmitter PASCAL Ci4
Pressure transmitter PASCAL Ci4 for general application, Type series CI4100 Features Application area Machinery construction Chemical and petrochemical industry General process technology Pressure transmitter
Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
Ball valve C 200 PROP / C 200 DOS
Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Characteristics C 00 PROP Proportional ball valve based on the C 00
2-PORT SEAT VALVES PN16 WITH FLANGED CONNECTIONS STAZ-16, STBZ-16, STCZ-52 DATASHEET
-PORT SEAT VALVES PN WITH FLANGED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In boiler, district heating and refrigeration plants, cooling towers, heating groups, in ventilation and air-handling units as
Multi-range pressure and differential pressure transmitter
Page 1/6 Multi-range pressure and differential pressure transmitter Type 402005 Applications Ventilation Air conditioning Clean-room technology Flue draft mechanisms Filter monitoring Brief description
Standard Flexboy bioprocessing bags
Standard Flexboy bioprocessing bags Fluid Management Systems Features Benefits Multiple High security of supply manufacturing sites 100% integrity Process safety and testing of bag integrity and immediate
Type Electrically Actuated 3-way Ball Valves
GF Piping Systems Electrically Actuated 3-way Ball Valves Type 167-17 General Size: ⅜ 2 aterial: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPD, FP End Connection: Solvent
This is an economic model, especially suitable for instruments with ¼ port connection. Not detachable to repair.
Diaphragm seals - Stainless steel d. seals ¼ - PVC diaphragm seals ¼ - Stainless steel d. seals ½ - PVC diaphragm seals ½ - Easy-to-clean diaphragm seals - High pressure diaphragm seals - Low pressure
VAC analysis measuring instrument
99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com VAC analysis measuring instrument testo 480 Cutting-edge technology for professionals
OPTISWITCH 6600 C Technical Datasheet
Technical Datasheet Microwave Level Switch for standard hygienic applications Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Small and compact KROHNE CONTENTS
Rosemount 1595 Conditioning Orifice Plate
Reference Manual Rosemount 1595 Conditioning Orifice Plate www.rosemount.com Reference Manual Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate NOTICE Read this manual before working with the product.
KF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Bellows are even provided for forming joints with main pipelines or sometimes
Standard Flexboy bioprocessing bags (For Europe, Asia and Latin America)
Standard Flexboy bioprocessing bags (For Europe, Asia and Latin America) Fluid Management Systems Features Benefits Multiple High security of supply manufacturing sites 100% integrity Process safety and
Electronic pressure switch with display For sanitary applications Model PSA-31
Electronic pressure measurement Electronic pressure switch with display For sanitary applications Model PSA-31 WIKA data sheet PE 81.85 Applications Food and beverage industry Pharmaceutical industry Filling
PCG550, PCG552, PCG554
PCG550, PCG55, PCG554 Pirani Capacitance Diaphragm Gauge The INFICON Pirani Capacitance Diaphragm Gauge (PCG55x) combines the INFICON Pirani technology with the advantages of a ceramic capacitance diaphragm
Standard Flexel 3D bioprocessing bags for Drums (US and Canada)
Standard Flexel 3D bioprocessing bags for Drums (US and Canada) Fluid Management Technologies Features Benefits Multiple High security of supply manufacturing sites All connections Safe and robust extensively
Introduction. LF494 /LF620 LF494 /LF622 1 to 4 (25 to 100 mm) Field Intelligent Device Mount-Anywhere Series Sanitary Electromagnetic Flowmeter
Field Intelligent Device Mount-Anywhere Series Sanitary Electromagnetic Flowmeter LF494 /LF620 LF494 /LF622 1 to 4 (25 to 100 mm) Introduction Sanitary electromagnetic flowmeters LF490 series are designed
glass optical fibers
ü For high ambient temperatures (models with chrome-plated brass and silicone sleeves) ü Executions for extreme environmental conditions ü Small dimensions ü Long sensing ranges ü Suitable for the detection
Infrared temperature measuring instrument
Infrared temperature measuring instrument testo 830 Fast, non-contact measurement of surface temperature Laser measurement point marker and large optics for exact measurement even at greater distances
Electronic pressure switch with display For sanitary applications Model PSA-31
Electronic pressure measurement Electronic pressure switch with display For sanitary applications Model PSA-31 WIKA data sheet PE 81.85 Applications Food and beverage industry Pharmaceutical industry Filling
Level measurement CleverLevel LBFH Point level detection
Product highlights User benefi ts Safe detection of liquids, bulk solids and powders Short immersion length Ecellent cleanability Capable of differentiation between foam and liquid Insensitive to adherent
Bags for Fluid Handling
Bags for Fluid Handling Standard Flexboy Bags 266 Standard Flexboy with EVA tubes (5 ml with Luer Lock connection) 268 Standard Flexboy with EVA tubes (50 ml to 3 l with Luer Lock connection) 269 261 Standard
EXPLOSION VENTING WITH STUVENT RUPTURE DISC
Background The pressure increase in process equipment caused by a dust/gas explosion can be controlled if a vent installed on the equipment is opened at the right moment. In order to reduce the risks for
Modular pressure transmitters for harsh environments DST P500, DST P507 and DST P550
Data sheet Modular pressure transmitters for harsh environments DST P500, DST P507 and DST P550 The P500 / P507 / P550 utilizes the thin film strain gauge sensing technology, incorporating an hermetically
Micro Motion T-Series Coriolis Flow and Density Meters
Product Data Sheet PS-00371, Rev. G October 2011 Micro Motion T-Series Coriolis Flow and Density Meters Micro Motion T-Series meters offer the best performance of any straighttube Coriolis meter. The single
compact YEAST MONITORRANGE
YEAST MONITORRANGE V.1 16/07/2013 the aber YEaSt monitors are REcoGNISED today as the most accurate and RELIaBLE INStRUmENtS FoR measuring the LIVE cell concentration on-line YEAST MONITORRANGE CONTENTS
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
Pressure transmitter PASCAL CV,
Pressure transmitter PASCAL CV, for food/pharmaceutical/biotechnology, Type series CV311.-..-K Features Modular pressure transmitter Output signal: - 4 20 ma - HART protocol (rev. 6), option - PROFIBUS
FlexBar HRT Pressure Transmitter
FlexBar HRT Pressure Transmitter 4...0 ma, -wire transmitter, HART communication Some hygienic connections conform to -A standards, FDA demands and EHEDG guidelines Configurable span, unit and damping
Specification Sheet (Ref XXXXXX)
Retractex B M Specification Sheet (Ref 243275-XXXXXX) The retractable armature Retractex B M was designed for sanitary applications in biotechnology, food, beverage and pharmaceutical industry. The compact
BTL5-A/C/E1_-M- -SF-F User's Guide
BTL5-A/C/E1_-M- -SF-F User's Guide english www.balluff.com 1 Notes to the user 1.1 Validity 1.2 Symbols and conventions 1.3 Scope of delivery 1. Approvals and markings 1.5 Abbreviations 2 Safety 5 2.1
DS 201P. Electronic Pressure Switch. Pressure Port With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
Pressure Port With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 600: 0. % FSO Nominal pressure from 0... 60 bar up to 00 bar Contacts, or independent PNP contacts, freely configurable
Screw-in resistance thermometers with terminal head Form B
Data Sheet 90.2002 Page 1/7 s with terminal head Form B for temperatures from -50 to +600 C with replaceable measuring insert as single or twin resistance thermometer terminal head Form B, BUZ, BUZH, BBK
Bourdon tube pressure gauge with electrical output signal Stainless steel, safety version, NS 63 Model PGT23.063
Mechatronic pressure measurement Bourdon tube pressure gauge with electrical output signal Stainless steel, safety version, NS 63 Model PGT23.063 WIKA data sheet PV 12.03 for further approvals see page
Temperature probes 468 Hans Turck GmbH & Co. KG Tel Fax Edition I/
468 Hans Turck GmbH & Co. KG Tel. +49 208 49 52-0 Fax +49 208 49 52-264 Temperature probe a Temperature probes TP series TP series Highest possible flexibility A temperature probe has to be flexible and
Electromotive process valve - 2 way angle-seat shut-off valve
Electromotive process valve - 2 way angle-seat shut-off valve Fail-safe position by energy storage Rapid flow shut off Weather and impact resistant design Designed according to hygienic demands Many diagnostic
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
Safety. Operating instructions Filter module VMF Measuring orifice VMO Fine-adjusting valve VMV DANGER. Contents WARNING CAUTION
0 Elster GmbH Edition 09. Translation from the German 050879 D GB F NL I E DK S N P GR TR CZ PL RUS H www.docuthek.com Operating instructions Filter module VMF Measuring orifice VMO Fine-adjusting valve
Pressure sensors SDE1, with display
Product range overview Method of measurement Piezoresistive pressure sensor with display Operating voltage Measured variable Pressure measuring range Pneumatic connection Type of mounting Electrical output
Operating instructions Evaluation system for flow sensors VS / / 2013
Operating instructions Evaluation system for flow sensors VS3000 7097 / 0 07 / 203 Contents Preliminary note...2 2 Safety instructions...3 3 Function and features... Mounting.... Mounting of the sensors...
Outside Plant. LMJ - Large Multi-Function Joint. Features and Benefits. Prysmian Part Number: See Following Pages. Kit Contents.
- Large Multi-Function Joint Prysmian Part Number: See Following Pages The is used for access applications within the external optical network and can be used for track, spur and loop applications. It
Indicating Digital Transmitter for Differential Pressure and Flow. Media 6 with LCD Media 6 with LED
Indicating Digital Transmitter for Differential Pressure and Flow Media 6 with LCD Media 6 with LED Application Microprocessor-controlled transmitter for measuring and indicating the differential pressure
Level measurement CleverLevel LBFI Point level detection
User Product benefits highlights Safe detection of liquids, bulk solids and powders Short immersion length Capable of differentiation between foam and liquid Insensitive to adherent or sticky media Status
Temperature Data Logger EBI 100
54 Data Logger EBI 100 Type EBI 10-T100 Measuring range -40 C... +150 C (-40 F...+302 F) 0.3 C (0.9 F) of +40 C... +150 C (-40 F... +302 F) 0.1 C (0.2 F) Memory 27,000 measured values Operating temperature
Filter Cartridge Housings for the Pharmaceutical Industry. Modular system for stainless steel filter housings. Flexibility, quality,
Filter Cartridge Housings for the Pharmaceutical Industry. Modular system for stainless steel filter housings. Flexibility, quality, industrycompliant documentation. This is how you configure your housing.
MAGFLO MAG 5100 W Benefits Application Flow Measurement Mode of operation Function Integration
Benefits N5 to N2000 (½" to 78") Connection flanges NSI and Ebonite Hard Rubber liner for all water applications EPM liner with drinking water approvals Hastelloy Integrated grounding and measuring electrodes
Stainle ss Ste e l Fit tings
www.swagelok.com Stainle ss Ste e l Fit tings For the Sanitar y Industries Jensen Series Kwik-Clamp, tube butt weld, cme threaded and plain bevel-seat, and specialty end connections 0 and 6L stainless