AVLC 0201 series Ultra Compact Size Multilayer Chip Varistor
|
|
|
- Edgar Underwood
- 5 years ago
- Views:
Transcription
1 AVLC 0201 series Ultra Compact Size Overview ESD Varistor is a component which acts as a nonconductor on the circuit in normal circum-stances. When over-voltage is loaded, it becomes a conductor which diverts over-current from circuits to ground at critical voltage level. Especially, new ultra compact size chip varistor with 0.6х0.3mm dimension can save design space in mobile phone and show even enhanced ESD performance. Features Ultra small size (0201 : 0.6х0.3mm) Meets IEC (ESD) level 4 requirements ESD Protection > 15kV Low capacitance for high frequency data line protection Fast response time < 1ns Available in tape and reel for automatic pick and place Max. permiable Operating Voltage Surge Voltage (V) Surge current (I) Protection Level Applications Electronic alliance for protection on ESD. LCD Module I / O Port, Keypad Mobile phone/pdas Wireless Handsets MP3 Player Lap top Computer Digital Camera Desk top Computer ESD Protection for sensitive IC Notebook Fig 1 V-I Characteristic Curve Model Description AVLC 5 S (1) (2) (3) (4) (5) (1) Series name : AVLC Low capacitance type varistor (2) Maximum continuous working voltage (Vdc) : 5-5.5V (3) Varistor voltage tolerance : S - special order (4) Chip size : 01 means 0201 ( 0.6 x 0.3 mm) (5) Capacitance : 015 means 15pF (typical) 06/07/17 (Rev. 01) Amotech Corporation ( 1
2 AVLC 0201 series Ultra Compact Size Electrical characteristics Varistor IL Cp Clamping Peak Transient IR Part No. Vdc(1) voltage (at Vdc) (at 1kHz, Voltage Current Energy (at 3.6V DC) at 1mA DC Vrms=0.5V) (V) (V) (μa) (pf) (V) (A) (J) (MΩ) AVLC 5S ( 10.5 ~ 19.5 ) Max.1 AVLC 5S ( 23.1 ~ 42.9 ) ~ Max. 35 Max Min. 10 AVLC 5S ( 35.0 ~ 65.0 ) Max.3 AVLC 5S (70.0 ~ ) Max.5 (1) Maximum continuous DC working voltage 2 Zener Diodes Input Output A Capacitance content Fig.2 Equivalent Circuit Appearance W L T M Size(mm) L W T M ± ± ± 0.03 Min /07/17 (Rev. 01) Amotech Corporation ( 2
3 AVLC 0201 series Ultra Compact Size Recommended Land pattern (Typical Dimensions) b a c a Size(mm) a b c ~ ~ ~ 0.35 Recommended Soldering Profile - Pb Free Solder Paste : Sn / Ag / Cu ( 96.5 / 3.0 / 0.5) 06/07/17 (Rev. 01) Amotech Corporation ( 3
4 AVLC 0201 series Ultra Compact Size ESD Absorption Characteristics (Typical data) Voltage [V] Open waveform AVLC5S01015 AVLC5S01033 AVLC5S01050 AVLC5S01100 Measuring Circuit Time [ns] Model Open Waveform AVLC 5S AVLC 5S AVLC 5S AVLC 5S Peak Voltage 1580 V 190 V 170 V 170 V 160 V Average Voltage ( 30ns to 100ns) 372 V 42 V 37 V 34 V 34 V ESD TESTS TEST CONDITIONS 150pF, 330 Ω contact discharge Charged voltage : 8kV, 0.1s interval V 1mA / V 1mA [%] Number of discharge [Times] AVLC5S01015 AVLC5S01033 AVLC5S01050 AVLC5S /07/17 (Rev. 01) Amotech Corporation ( 4
5 AVLC 0201 series Ultra Compact Size CAPACITANCE vs. FREQUENCY CHARACTERISTICS 1n AVLC5S01015 AVLC5S01033 AVLC5S01050 AVLC5S pF Capacitance (F) 100p 10p 50pF 33pF 15pF 1p 1k 10k 100k 1M 10M 100M 1G Frequency (Hz) TRANSMISSION CHARACTERISTICS IMPEDANCE vs. FREQUENCY CHARACTERISTICS IL (db) Impedance (Ω) AVLC5S01015 AVLC5S01033 AVLC5S01050 AVLC5S AVLC5S01015 AVLC5S01033 AVLC5S01050 AVLC5S pF 33pF 50pF 100pF pF 33pF 100pF 50pF -50 1M 10M 100M 1G Frequency (Hz) 0.1 1M 10M 100M 1G Frequency (Hz) 06/07/17 (Rev. 01) Amotech Corporation ( 5
6 AVL/AVLC 0402 Series Overview ESD Varistor is a component which acts as a nonconductor on the circuit in normal circumstances. When over-voltage is loaded, it becomes a conductor which diverts over-current from circuits to ground at critical voltage level. Surge Voltage (V) Features Meets IEC (ESD) Level 4 & IEC (EFT), Level 4 requirements ESD Protection > 25 KV Low capacitance for high frequency data line protection Fast response time < 1ns Available in tape and reel for automatic pick and place Max. permiable Operating Voltage Surge current (I) Protection Level Applications Mobile Phone & PDA Cellular Phone PCMCIA / Compact Flash Card RS-232 & RS-423 Data Lines USB Data Lines Fig 1 V-I Characteristic Curve MCM Boards LCD Module Model Description AVLC 5 S (1) (2) (3) (4) (5) (1) Series name : AVL General Type AVLC Low capacitance type varistor (2) Maximum continuous working voltage (Vdc) : 5-5.5V, 14-14V, 18-18V (3) Breakdown voltage tolerance : S - special order, M: 20 % Vn tolerance (4) Chip size : (1.0x0.5mm), (1.6x0.8mm) (5) Peak current (AVL) : A Capacitance (AVLC) : 003-3pF, pF, pF, pF, pF 07/05/22 (Rev. 01) Amotech Corporation ( 1
7 AVL/AVLC 0402 Series Electrical characteristics Part No. Vdc (1) Varistor voltage DC Leakage Current Cp 1kHz, V rms =0.5V) Clamping Voltage (VC) Peak Current (Imax) Insulation Resistance (V) (V) ( μa ) (pf) (V) (A) ( MΩ ) AVL 5M max 480( ) min AVL 14K max 160( ) min AVLC 5S max 50 (35-65) min AVLC 5S max 100 (70-130) min AVLC 5S max 200 ( ) min AVLC 14S max 50 (35-65) min AVLC 14S max 100 (70-130) min AVLC 18S max 15 ( ) min AVLC 18S max 3.0 ( ) at 1MHz min (1) Maximum continuous DC working voltage (2) Cp measuring frequency of AVLC 18S is 1 MHz 2 Zener Diodes Input Output A Capacitance content Fig.2 Equivalent Circuit Appearance W L T M Symbol L W T M Size (mm) 1.0 ± ± 0.10 Max ± /05/22 (Rev. 01) Amotech Corporation ( 2
8 AVL/AVLC 0402 Series Recommended Land pattern (Typical Dimensions) b a c a Symbol a b c Size (mm) Recommended Soldering Profile - Pb Free Solder Paste : Sn / Ag / Cu ( 96.5 / 3.0 / 0.5) 07/05/22 (Rev. 01) Amotech Corporation ( 3
9 AVL 0603 Series Overview ESD Varistor is a component which acts as a nonconductor on the circuit in normal circumstances. When over-voltage is loaded, it becomes a conductor which diverts over-current from circuits to ground at critical voltage level. Surge Voltage (V) Features Meets IEC (ESD) Level 4 & IEC (EFT), Level 4 requirements ESD Protection > 25 KV Low capacitance for high frequency data line protection Fast response time < 1ns Available in tape and reel for automatic pick and place Max. permiable Operating Voltage Surge current (I) Protection Level Applications Mobile Phone & PDA Cellular Phone PCMCIA / Compact Flash Card RS-232 & RS-423 Data Lines USB Data Lines Fig 1 V-I Characteristic Curve MCM Boards LCD Module Model Description AVL 5 M (1) (2) (3) (4) (5) (1) Series name : AVL General Type (2) Maximum continuous working voltage (Vdc) : 5-5.5V, 14-14V, 18-18V (3) Breakdown voltage tolerance : S - special order, M: 20 % Vn tolerance (4) Chip size : (1.0x0.5mm), (1.6x0.8mm) (5) Peak current : A 07/05/22 (Rev. 01) Amotech Corporation ( 1
10 AVL 0603 Series Electrical characteristics Part No. Vdc (1) Varistor voltage DC Leakage Current Cp 1kHz, V rms =0.5V) Clamping Voltage (VC) Peak Current (Imax) Insulation Resistance (V) (V) ( μa ) (pf) (V) (A) ( MΩ ) AVL5M max 800( ) min AVL14K max 350( ) min AVL18S LC max 75( ) min AVL18S LC max 120(84-156) min (1) Maximum continuous DC working voltage 2 Zener Diodes Input Output A Capacitance content Fig.2 Equivalent Circuit Appearance W L T M Symbol L W T M Size (mm) 1.6 ± ± 0.15 Max ± /05/22 (Rev. 01) Amotech Corporation ( 2
11 AVL 0603 Series Recommended Land pattern (Typical Dimensions) b a c a Symbol a b c Size (mm) Recommended Soldering Profile - Pb Free Solder Paste : Sn / Ag / Cu ( 96.5 / 3.0 / 0.5) 07/05/22 (Rev. 01) Amotech Corporation ( 3
DATASHEET 0201 / 0402 / AVL / AVLC Series
Document Datasheet Type Multilayer Chip Varistor Application ESD protection Part No. AVL/ AVLC series Revision 0 DATASHEET 0201 / 0402 / 0603 AVL / AVLC Series Applications Mobile Phone & PDA Cellular
DATASHEET ch / cc. AVSC Series
Document Datasheet Type Application ESD protection Part No. AVSC series Revision 0 DATASHEET 0504-4ch / 0805-8cc AVSC Series Applications All of the circuits which can be damaged by ESD, Surge Possible
Advanced Material On TECHnology - AMOTECH
Advanced Material On TECHnology - AMOTECH CONTENTS PRODUCTS OVERVIEW 1 Compact Array (Space Saved) / AVSC F Series (4_Element) 2 Compact Array (Space Saved) / AVSC E Series (8_Element) 3 General Array
Varistors(SMD) Countermeasure for Surge and Static Electricity
(1/1) Varistors(SMD) Countermeasure for Surge and Static Electricity Conformity to RoHS Directive AVR Series AVR-M, AVRL Types Varistor (Variable resistor) is a nonlinear resistive element of the voltage
Global Network. AMOTECH Co., Ltd. Global Sales Network
Global Network SALES & MARKETING 17-2 Jamwon-Dong, Seocho-Gu, Seoul 137-902, Korea Tel: +82-2-544-1351( Ext. 316, 314) Fax: +82-2-517-7183 E-mail : mspak71@amotech.co.kr ; hjmun@amotech.co.kr FACILITY
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SET23AXXL02 series of transient voltage suppressor (TVS) are designed to protect components which are connected to
Varistors(SMD) Countermeasure for Surge and Static Electricity
(1/1) Varistors(SMD) Countermeasure for Surge and Static Electricity Conformity to RoHS Directive AVR Series AVR-M, AVRL Types Varistor (Variable resistor) is a nonlinear resistive element of the voltage
Alfa-MOS Technology. AFE0563 One-Line ESD Protection Low Capacitance Bi-direction TVS. General Description. Pin Description ( DFN )
General Description are designed by bi-direction TVS diode, to protect high speed data interfaces. This product has been specifically designed to protect sensitive components which are connected to data
Transient Voltage Suppressor. Operating Temperature : -55 to Storage Temperature : -55 to + 150
Operating Temperature : -55 to + 125 Storage Temperature : -55 to + 150 Packaging Method : Tape & Reel(per Specifications) Features: Full compliance on : IEC 61000-4-2 (ESD) ±15kV (air) ± 8kV (contact)
SPE6V8UN Ultra Low Capacitance 2 -Line ESD Protection Array
DESCRIPTION The is 2-channel very low capacitance ESD transient voltage suppressor which provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic
DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
onlinecomponents.com
Chip Varistors Countermeasure for surge voltage and static electricity AVR series Type: Issue date: AVR-M AVRL September 211 Conformity to RoHS Directive: This means that, in conformity with EU Directive
Single-Line ESD Protection Array
DESCRIPTION The are designed by TVS bi-direction device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a
CitrusCom CS0801S. Applications. Features. Mechanical Characteristics. Description. Circuit Diagram. Pin Configuration
Features Transient protection for high-speed data lines IEC 61000-4-2 (ESD) ±15kV (Air) ±8kV (Contact) IEC 61000-4-4 (EFT) 40A (5/50 ns) Cable Discharge Event (CDE) Package optimized for high-speed lines
Transient Voltage Suppressor. Operating Temperature : -55 to Storage Temperature : -55 to + 150
Operating Temperature : -55 to + 125 Full compliance on : IEC 61000-4-2 (ESD) ±15kV (air) ± 8kV (contact) IEC 61000-4-4 (EFT) 40A 5/50ns IEC 61000-4-5(Lightning) 8/20μs Low voltage operation : first in
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s component is surge rated diode array designed to protect high speed data line interfaces. It has been specifically
AOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit
uclamp0801t Low Profile μclamp 1-Line ESD protection PROTECTION PRODUCTS - MicroClamp Description Features Mechanical Characteristics Applications
- MicroClamp Description The μclamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
2-Line ESD Protection Array
DESCRIPTION The SPE0532 are designed by TVS bi-direction device that is to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space
SPE6V8UH Ultra Low Capacitance 4 -Line ESD Protection Array
DESCRIPTION The SPE6V8UH is 4-channel very low capacitance ESD transient voltage suppressor which provides a very high level of protection for sensitive electronic components that may be subjected to electrostatic
Low Capacitance Bidirectional Single Line TVS Protection Diode UM5080T DFN
General Description UM5080T Low Capacitance Bidirectional Single Line TVS Protection Diode UM5080T DFN2 1.0 0.6 The UM5080T TVS protection diode is designed to replace multilayer varistors (MLVs) in portable
PESDSC9D5VU ESD Protector
ESD Protector Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large cross-sectional
PESDR0554S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Ordering Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
UM5075/5079 Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN General Description Applications Features
General Description Single Line ESD Protection Diode Array UM5075 SOD523 UM5079 DFN2 1.0 0.6 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as
PTVSHC2EN10VU Transient Voltage Suppressor
Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large
SRV05-4L. Ultra Low Capacitance Array for ESD Protection. Features. Description. Main applications. Protection solution to meet. Ordering Information
Ultra Low Capacitance Array for ESD Protection Description The provides a typical line to line capacitance of 0.80pF and low insertion loss up to 3GHz providing greater signal integrity making it ideally
PTVSHC3N7VUL1 Transient Voltage Suppressor
Transient Voltage Suppressor Description The ESD protector is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They feature large
UESD6V8L1F. Low Capacitance Single Line ESD Protection Diode Array UESD6V8L1F DFN General Description
Low Capacitance Single Line ESD Protection Diode Array DFN2 1.0 0.6 General Description The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell
0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
Bi-directional ESD Protection Diode
Bi-directional ESD Protection Diode FEATURES Meet IEC61-4-2 (ESD) ±15kV (air), ±8kV (contact) Meet IEC61-4-4 (EFT) rating. 4A (5/5ns) Protects one Bi-directional I/O line Moisture sensitivity level: level
UMD 1423 UNITED MICRO DEVICE INC. Pi filter array with ESD protection. PRODUCT DESCRIPTION APPLICATIONS. This device has 20-bumps 4.
PRODUCT DESCRIPTION UMD1423 is a Pi filter array with TVS diodes for ESD protection. This device has six Pi filters integrated along with four channels of ESD protection. The Pi filters have values of
Features. Applications
- MicroClamp Description The µclamp TM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable
Low-Capacitance Bidirectional Micro Packaged TVS Diodes for ESD Protection
ESD5B5CL Low-Capacitance Bidirectional Micro Packaged TVS Diodes for ESD Protection The ESD5B5CL is designed with Leiditech Punch-Through process TVS technology to protect voltage sensitive components
PESDALC10FN5VU Low Capacitance TVS Array
PESDALC1FN5VU Low Capacitance TVS Array Description The PESDALC1FN5VU is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics
IEC (EFT) 40A
Features ESD Protect for high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4- (ESD) ±1kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (/0ns) IEC 61000-4- (Lightning) 1A (8/0µs)
PESDLC363T5VU ESD Protector
ESD Protector Description The protects sensitive semiconductor components from damage or upset due to electrostatic discharge (ESD) and other voltage induced transient events. They feature large cross-sectional
September 2014 AVR * JIS[EIA]
![September 2014 AVR * JIS[EIA]](/thumbs/88/117057571.jpg "September 2014 AVR * JIS[EIA]")
V o l t a g e P r o t e c t i o n D e v i c e s September 2014 AVR AVRM0402/AVRL0402 AVRM0603/AVRL0603 AVRM05/AVRL05 AVRM1608/AVRL1608 AVRM2012 0402 [005 inch]* 0603 [0201 inch] 05 [0402 inch] 1608 [0603
SPECIFICATION Brightek (Europe) Limited Semiconductor T01 Device. 1. Part Number Identification T A
1. Part Number Identification T01-0402 - 050-100 A - 11 Series Name Size Case : 0402 (DFP1006) 11 Bidirectional Inner code Reverse Working Voltage 050=5*10 0 =5V Parasitic Capacitance 100=10*10 0 =10pF
PTVSLC3D5VB Low Capacitance TVS
Low Capacitance TVS Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning,
EGA10603V12A1-B Engineering Specification
RoHS Pb EGA10603V12A1- Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients. It has
6 Channel EMI Filter Array with ESD Protection
6 Channel EMI Filter Array with ESD Protection Features Six channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C) network Greater than 32dB attenuation
UNITED MICRO DEVICE INC.
Description TVS diodes are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They offer superior electrical characteristics such
4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 2397 6 5 4 1 2 3 MARKING (example only) XX YY Dot = pin 1 marking XX = date code YY = type code (see table below) 2453 1 DESIGN SUPPORT TOOLS click logo to get started Models
PESDALC10N3V3U Low Capacitance TVS Array
Description The is low capacitance transient voltage suppressor array for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
Multi Layer Chip Varistors
Introduction Multilayer Chip Varistors (MLV) have good nonlinear voltage-current characteristics and high surge capability. They also have fastresponse characteristics in several hundred pico second level.
MLVG0402 Series Engineering Specification
RoHS Pb MLVG0402 Series Engineering 1. Scope (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating termination
WPE0541P1 1-Line Bi-directional Low Capacitance TVS Diode
Description Mechanical Characteristics The is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage, and fast response time,
AOZ8251. One-line Bidirectional TVS Diode. Features. General Description. Applications. Signal Line
One-line Bidirectional TVS Diode General Description The AOZ8251 is a one-line bidirectional transient voltage suppressor diode designed to protect high speed data lines and voltage sensitive electronics
INPAQ Global RF/Component Solutions
TVL SC7 4 AC Specification Product Name Series Part No Package Size Transient Voltage Suppressor TVS Series TVL SC7 4 AC SC7-6L TVL SC7 4 AC Engineering Specification 1. Scope TVL SC7 4 AC s are TVS arrays
ST0561D4. 1-Line Bi-directional TVS Diode. Description. Mechanical Characteristics. Applications. Features. Ordering Information
-Line Bi-directional TVS Diode Description The ST56D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making this
AZC002-02N Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 2 high-speed I/O channels Provide ESD protection for each channel to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) (5/50ns) Level-3, 20A for I/O, 40A for
RClamp0551P. Ultra-Low Capacitance 1-Line, 5V ESD protection. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
4-Line BUS-Port ESD Protection
4-Line BUS-Port ESD Protection 2397 6 5 4 1 2 3 MARKING (example only) Dot = pin 1 marking XX = date code YY = type code (see table below) 2453 1 XX YY DESIGN SUPPORT TOOLS click logo to get started Models
PUSB3FA0. 1 Product profile. ESD protection for ultra high-speed interfaces. 1.1 General description. 1.2 Features and benefits. 1.
Rev. 1 1 February 2018 Product data sheet 1 Product profile 1.1 General description The device is designed to protect high-speed interfaces such as SuperSpeed USB, High-Definition Multimedia Interface
AZC002-04S Low Capacitance ESD Protection Array For High Speed Data Interfaces Features IEC (ESD) ±15kV (air), ±8kV (contact)
Features ESD Protect for 4 high-speed I/O channels Provide ESD protection for each channel to IEC 000-4- (ESD) ±kv (air), ±8kV (contact) IEC 000-4-4 (EFT) (/0ns) Level-3, 0A for I/O, 40A for Power IEC
Motocraft Multilayer Varistor
MLV1005 / 1608 SERIES ENGINEERING SPECIFICATION 1. SCOPE (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating
ESD9X5VL ESD9X5VL. X x. Transient Voltage Suppressor
Ultra Small Profile, low capacitance Transient Voltage Suppressor Descriptions The is an ESD transient voltage suppression component which provides a very high level of protection for sensitive electronic
Single Line ESD Protection Diode Array
General Description Single Line ESD Protection Diode Array SOD523 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers,
Description Mechanical Characteristics Features Applications Ordering Information Part Number Packaging Reel Size
ST36D4 -Line Bi-directional TVS Diode Description The ST36D4 is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
0504A PESDR0504S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS array, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
PTVSLC3D24VB Low Capacitance TVS
Description The is a low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to ESD lightning, and other voltage
TVN S AB0 Engineering Specification
TVN S3 A Engineering. Scope TVN S3 A s are TVS diodes designed to protect one power/control line or one low speed signal line from overvoltage hazard of Electrostatic Discharge (ESD), Electrical Fast Transients
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description Brightking s SDT23CXXL02 series are designed to protect sensitive electronics from damage or latch-up due to ESD and other voltage
RClamp5011ZA. Ultra Small RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 21 size multilayer varistors (MLVs) in portable
CDMSP M Surface Mount TVS Diode Array
*RoHS COMPLIANT Features RoHS compliant* Protects four I/O lines Ultra-low capacitance ~.55 pf ESD protection > kv Surge protection Applications High Definition Multimedia Interface (HDMI) Digital Visual
Applications. Keypads Side Keys,LCD Displays IEC (ESD) immunity test Air discharge: ±30kV Contact discharge: ±30kV
1-Line Low Capacitance Bi-directional TVS Diode Description The is a bi-directional TVS diode, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage,
WE05R. Features. Transient Voltage Suppressor IEC COMPATIBILITY (EN ) SOT-143 (Top View) Document: W , Rev: A
Document: W0005, Rev: A Transient Voltage Suppressor Features 00Watts Peak Power per Line (tp = 8/0μs) Protects two I/O lines Low operating voltage: 5V Ultra Low capacitance(
RClamp0521PA. Ultra-Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
TVW MSOP 04 AD0 Engineering Specification
TVW MSOP 4 AD 1 Scope TVW MSOP 4 AD s are TVS arrays designed to protect power/control lines and high-speed signal lines from overvoltage hazard of Electrostatic Discharge (ESD), Electrical Fast Transients
SP1050 Series for Power-over-Ethernet PSE Protection
SP1050 Series for Power-over-Ethernet PSE Protection RoHS Pb GREEN Description The SP1050-04BTG provides over-voltage protection for Power-over-Ethernet PSE equipment in a space saving SOIC-8 package.
Common Mode Noise Filter. LCFE Series. Description. Features. Applications. 1210mm Size. Source Meter. LCR Meter (3GHz) Source Meter.
Description This specification covers the engineering requirements for both Common Mode Noise Filter (CMF) and ESD Protection, especially high speed differential serial interfaces, such as USB 3., USB
AOZ8882. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The AOZ8882 is a transient voltage suppressor array designed to protect high speed data lines such as HDMI, MDDI, USB, SATA, and Gigabit Ethernet
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description The series of is designed to protect power port and the chip Vbus interfaces. It has been specifically designed to protect sensitive
INPAQ. Specification TEA10402V15A0. Product Name. ESD Guard TM TEA Series (Thin Film Air Gap) Size EIA Global RF/Component Solutions
TEA10402V15A0 Specification Product Name Series Part No ESD Guard TM TEA Series (Thin Film Air Gap) TEA10402V15A0 Size EIA 0402 TEA10402V15A0 Engineering Specification 1. Scope TEA series is designed to
IP4220CZ6 Dual USB 2.0 Integrated ESD protection to IEC level 4
INTEGRATED DISCRETES Integrated ESD protection to IEC 61000-4-2 level 4 2004 September 17 Philips Semiconductors FEATURES ESD IEC 61000-4-2 level 4, ± 8kV contact discharge compliant protection Four ultra-low
PESDALC143T5VU Low Capacitance ESD Protector
Low Capacitance ESD Protector Description The is low capacitance transient voltage suppressor for high speed data interface that designed to protect sensitive electronics from damage or latch-up due to
TClamp1202P. Low Capacitance TClamp Surge Protection for 12V Interfaces. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
TClamp122P Low Capacitance TClamp Surge Protection for 12V Interfaces PROTECTION PRODUCTS Description TClamp 122P provides dedicated surge and ESD protection for RS-485 and other 12V lines in industrial
Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP1006-2M
Ultra Low Capacitance Bidirectional Symmetrical (BiSy) Single Line ESD Protection Diode in LLP6-2M 1 2 21129 MARKING (example only) XY Bar = pin 1 marking X = date code Y = type code (see table below)
Surge Components, Inc.
1.FEATURE 100 Watts Peak Power per Line(tp=8/20us) SC-70-6L package Protect 4 lines bidirectional and 5 lines unidirectional Monolithic structure Working woltage: 5V Low clamping voltage ESD protection
RClamp0501T. Low Capacitance 1-Line ESD protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics.
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
UMD UNITED MICRO DEVICE INC. Small Surface Mount Device TVS. Description. SOD-523 Pin Configuration. Features. Mechanical Characteristics
SOD-523 Single Line Diode for ESD Protection Description diodes are designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and PDA s. They offer
Low Capacitance, Single-Line ESD Protection Diode
VBUS51BD-HD1 Low Capacitance, Single-Line ESD Protection Diode 1 MARKING (example only) 856 XY Bar = cathode marking Y = type code (see table below) X = date code 111 855 DESIGN SUPPORT TOOLS click logo
4-Line BUS-Port ESD Protection Array - Flow Through Design
-Line BUS-Port ESD Protection Array - Flow Through Design 22736 5 MARKING Pin 1 5F = type code = date code month YY = date code year DESIGN SUPPORT TOOLS click logo to get started Models Available 1 YY
PESDNC553T5VU Normal Capacitance ESD Protector
Normal Capacitance ESD Protector Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is normal capacitance transient voltage suppressors for high speed
AZ H Transient Voltage Suppressing Device For ESD/Transient Protection. Features. Circuit Diagram / Pin Configuration. Applications.
Features ESD Protection for Line with Bi-directional. Provide ESD protection for the protected line to IEC 6000-4- (ESD) ±0kV (air), ±kv (contact) IEC 6000-4-4 (EFT) 40A (5/50ns) IEC 6000-4-5 (Lightning)
AOZ8101. Ultra-Low Capacitance TVS Diode Array. General Description. Features. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The AOZ8101 is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning.
Glass Ceramic ESD Suppressor
Glass Ceramic ESD Suppressor Ideal ESD Suppressor for Ultra High Speed Lines 2014.2 1/19 Contents Development Background Electrical Characteristics Application in Circuit IC Module Mobile RF Antenna TV/STB
STF701. T-Filter with TVS Diode Array For EMI Filtering and ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The STF701 is a low pass T-filter with integrated TVS diodes. It is designed to provide bi-directional filtering of unwanted EMI/RFI signals and electrostatic discharge (ESD) protection in
MLVS 0402 Series Engineering Specification
MLVS 0402 Series 1. Scope This specification is applicable to Chip Metal Oxide Varistor in multilayer technology.the customer designed part number drawing take precedence over this specification. For RoHS
INTEGRATED EMI FILTER/ESD PROTECTION FOR LCD DISPLAYS IN MOBILE HANDSETS
INTEGRATED EMI FILTER/ESD PROTECTION FOR LCD DISPLAYS IN MOBILE HANDSETS Manufactured by: Integrated Products Group Garden Grove, CA Telephone: (714) 891-6171 More than solutions enabling possibilities
PESDLC553T5VU Low Capacitance ESD Protector
Description The is a TVS array designed to protect I/O or data lines from the damaging effects of ESD. It is low capacitance transient voltage suppressors for high speed data interface that designed to
ESD8V0L... ESD8V0L1B-02LRH. Type Package Configuration Marking ESD8V0L1B-02EL
Low Capacitance TVS Diode ESD / transient protection of highspeed data lines in. / 5 / V applications according to: IEC6000 (ESD): up to ± 5 KV (contact) IEC6000 (EFT): 0 A (5/50 ns) IEC60005 (surge):
5-Line ESD Protection Diode Array in LLP75-6L
-Line ESD Protection Diode Array in LLP7-6L 6 996 MARKING (example only) 997 XX YY Dot = pin marking XX = date code YY = type code (see table below) DESIGN SUPPORT TOOLS Models Available click logo to
SP2574NUTG 2.5V 40A Diode Array
TVS Diode Arrays (SPA Diodes 2.5V 40A Diode Array RoHS Pb GREEN Description The is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge, CDE (cable discharge
RClamp0582B. Low Capacitance RClamp ESD and EOS Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
RClamp582B Low Capacitance RClamp ESD and EOS Protection PROTECTION PRODUCTS Description The RClamp 582B transient voltage suppressor is specifically designed to protect sensitive components which are
AOZ8312. Low Capacitance 2.5 V TVS Diode. Features. General Description. Applications
Low Capacitance 2.5 V TVS Diode General Description The is a transient voltage suppressor array designed to protect high speed data lines from ESD and lightning. This incorporates twelve low capacitance
AZ H Transient Voltage Suppressing Device For ESD/Transient Protection. Features. Circuit Diagram / Pin Configuration. Applications.
Features ESD Protection for 1 Line with Bi-directional. Provide ESD protection for the protected line to IEC 61000-4- (ESD) ±16kV (air), ±16kV (contact) IEC 61000-4-4 (EFT) 50A (5/50ns) IEC 61000-4-5 (Lightning)
RClamp0504PA RailClamp Low Capacitance TVS Array
- RailClamp Description RailClamp TVS diodes are specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic
SDC15. TVS Diode Array for ESD Protection of 12V Data and Power Lines. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics
Description The transient voltage suppressor (TVS) is designed to protect components which are connected to data and transmission lines from voltage surges caused by electrostatic discharge (ESD), electrical