Electrical Specifications

Transcription

1 POWER Dt Sheet NTS350 Series 350 Wtts Totl Power: Wtts Input Voltge: Vc Vdc # of Outputs: Single SPECIAL FEATURES Active power fctor correction IEC EN complince Remote sense Power fil nd remote inhiit Single wire current shring Built-in EMI filter Low output ripple 5 V stndy 12 V fn output Overvoltge protection Overlod protection Therml overlod protection DC power good Built in OR-ing diode/fet Optionl fn cover (-CF suffix) Optionl end fn cover (-CEF suffix) SAFETY TUV UL 0950 CSA culus (-CEF) NEMKO AUSTEL CB Certificte nd report CE Mrk (LVD) CCC Certificte Electricl Specifictions Input Input rnge: Vc (wide rnge) Frequency: Hz (47-63 Hz for -CEF versions) Inrush current: 38 A mx., cold 25 C Efficiency: EMI filter: Sfety ground lekge current: Output Mximum power: Adjustment rnge: ± 5% 85% typicl t full lod FCC Clss B conducted nd rdited; CISPR22 Clss B conducted nd rdited; EN55022 Clss B conducted nd rdited; VDE0878PT3 Clss B conducted nd rdited. < /60 Hz, 264 Vc input 200 W for convection; 350 W with 30CFM forced ir Stndy output: 5 2 A regulted, ± 5% Fn output: Hold-up time: Overlod protection: Overvoltge protection: 12 1 A, -5 %, +7%, 0.5 A for -CF version W lod, 115 Vc nominl line t fctory voltge setting Short circuit protection on ll outputs. Cse overlod % of pek rting 20-35% ove nominl output

2 LPS100-M NTS350 Series Series Dt Dt Sheet Sheet Logic Control Power filure Remote on/off DC OK Remote sense TTL logic signl goes high msec fter min output. It goes low t lest 4 msec efore loss of regultion Requires n externl contct closure to inhiit outputs TTL logic goes high fter the output is in regultion. It goes low when there is loss of regultion. Compenstes for 0.5 V led drop min. Will operte without remote sense connected. Reverse connection protected. Environmentl Specifictions Operting temperture: Storge temperture: -40 C to +85 C 0 to 50 C mient derte ech output s 2.5% per degree from 50 to 70 C. Electromgnetic susceptiility: Designed to meet EN ; -2, -3, -4, -5, -6, -8, -11 Level 3 Humidity: Virtion: MTBF demonstrted: Operting; non-condensing 10% to 90% RH Three orthogonl xes, sweep t 1 oct/min, 5 min. dwell t four mjor resonnces. 2 G pek 8 Hz to 500 Hz, opertionl 1M hours t full lod nd 25 C mient conditions Ordering Informtion Model Numer Output Voltge Minimum Lod Mximum Lod with Convection Cooling Mximum Lod with 30CFM Forced Air Pek Lod 1 Regultion 2 Ripple P/P (PARD) 3 NTS V 0 A 16.6 A 29.2 A 33 A ± 2% 120 mv NTS V 0 A 8.3 A 14.6 A 16.5 A ± 2% 240 mv NTS V 0 A 4.2 A 7.3 A 8.2 A ± 2% 480 mv NTS V 0 A 3.7 A 6.5 A 7.4 A ± 2% 540 mv 1. Pek current lsting < 30 seconds with mximum 10% duty cycle. 2. At 25 C including initil tolernce, line voltge, lod currents nd output voltges djusted to fctory settings. 3. Pek-to-pek with 20 MHz ndwidth nd 10 µf (tntlum cpcitor) in prllel with 0.1 µf cpcitor t rted line voltge nd lod rnges. 4. CF suffix dded to the model numer indictes cover with top fn. -CEF suffix dded to the model numer indictes cover with end mounted fn cover nd AC inlet 5. This product is Component Power Supply nd is only for inclusion y professionl instllers within other equipment nd must not e operted s stndlone product. EMC complince to pproprite stndrds must e verified t the system level. This product is for sle to OEMs nd System Integrtors, including through Distriution Chnnels. It is not intended for sle to End Users.

3 LPS100-M NTS350 Series Series Dt Dt Sheet Sheet Pin Assignments Connector SK1 PIN 1 Line PIN 3 Neutrl PIN 5 Ground SK5 PIN 1 V1 swp PIN 2 - Remote Sense PIN 3 + Remote Sense PIN 4 5VSB (stndy) PIN 5 5VSB return PIN 6 +12V PIN 7 Common PIN 8 Inhiit PIN 9 DC power good (DC OK) PIN 10 Power Fil (POK) Adjustment Potentiometers Mting Connectors SK1 AC input SK2,3,4 +V1 Output djust +5VSB djust Molex (USA) Molex (UK) PINS: Molex BB SK5 Control signls Molex PINS: Or Amp: PINS: Artesyn Emedded Technologies Connector Kit # includes ll of the ove 1. Specifictions suject to chnge without 2. All dimensions in inches (mm), tolernce is ± Specifictions re t fctory settings 4. Mounting mximum insertion depth is Wrrnty: 2 yer 6.Weight: NTS35X 1.65 ls/750g. NTS35X-CF 2 ls/909g. NTS35X-CEF 2.25 ls/1022g.

4 NTS350 Series Dt Sheet Mechnicl Drwing - CEF option AIR FLOW DIRECTION 9.15" (232.3) 1.61" (40.9) 1.255" (31.9) 0.862" (21.9) 4.0" (101.6) 2.40" (61) 5.85" (148.6) 6.244" (158.6) 6.437" (63.5) 0.862" (21.9) 2.9" (73.6) 4.7" (119.6) 5.5" (139.7) 0.752" (19.1) #6-32 (8 plces) M3 (8 plces) WORLDWIDE OFFICES Americs 2900 S.Dilo Wy Tempe, AZ USA Europe (UK) Wterfront Business Prk Merry Hill, Dudley West Midlnds, DY5 1LX United Kingdom +44 (0) Asi (HK) 14/F, Lu Plz 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Artesyn Emedded Technologies, Artesyn nd the Artesyn Emedded Technologies logo re trdemrks nd service mrks of Artesyn Emedded Technologies, Inc. All other nmes nd logos referred to re trde nmes, trdemrks, or registered trdemrks of their respective owners Artesyn Emedded Technologies, Inc. All rights reserved. For full legl terms nd conditions, plese visit For more informtion: For support: productsupport.ep@rtesyn.com NTS350 DS 21Mr2016

5 NTS350 Series Dt Sheet Mechnicl Drwing + V OR-ing out (Must e used in prllel opertion) + V out (Do not use in prllel opertion) Common SK (32.26) -CF option -CF option (SEE NOTE 5) Voltge ADJ POT 1.14 (29.1).75 (19.1) (3X) 1.5 (38.10) 6.4 (2X) 5.85 (148.7) 6.25 (158.7) 2.5 (63.5) (4X) 4.0 (101.6) 4.7 (119.6)(2X) 5.5 (139.7) (2X) 7.0 (177.8) #6-32 (8 plces) M3 (8 plces)