AT SERIES. AT Series CONNECTOR SOLUTIONS
|
|
|
- Cassandra Ramsey
- 6 years ago
- Views:
Transcription
1 AT SERIES AT Series CONNECTOR SOLUTIONS 4
2 AT Series Overview AT Series connectors are a high-performance, cost effective solution able to be used in a variety of interconnect applications: Heavy Duty, Transportation, Marine, Diagnostic, Military, Alternative Energy and Agricultural. They contain superior environmental seals and seal retention capabilities. The connector design incorporates an integral latching system that ensures a definitive electrical and mechanical connection. Connector housings are manufactured with a thermoplastic material that is not only durable, but has excellent UV resistance, dielectric/mechanical properties and environmentally RoHS compliant. The sealing system is comprised of a front and rear silicone, multi-sealing perimeter against environmental ingress. Contacts are derived from quality copper alloy to ensure an electrically-reliable connection. AT Series connectors are compatible with other existing standard products industry-wide. Features & Benefits Current Capacity Wire Range Temperature Dielectric Value Drop Test Shock Vibration Connector Terminal Retention Connector Retention Thermal Shock Size 6, 3A (max) Size 6 contacts will accept wire ranges of 4 thru 20AWG Operating temperature range: -55 C to +25 C at rated current Meets or exceeds 500 volts minimum Shall not become detached or loosened when placed at 750mm and dropped to concrete eight times No latch disengagement or discontinuity shall be the result when subjected to 50 g s in each of three axis (X, Y & Z) Continued continuity without degradation to mechanical or physical attributes following vibration. (max acceleration 20 g s at Sine sweep of Hz) When subjected to a direct pull, contacts achieve a minimum pull-out force of 25 lbs. A mated connector subjected to a pulling force by the exiting wire bundle at 25 lbs. times the number of contacts to a maximum of 00 lbs. applying load for 30 seconds Subjected to 0 cycles at -55 C to +25 C with no cracking, chipping or other damage detrimental to the normal operation of the connector Insulation Resistance 000 megohms minimum at 25 C Mating Cycle Durability Following 00 cycles of connection engagement and disengagement, degradation either mechanical or electrical is not evident 42
3 AT Series Features & Benefits, cont. Contact Millivolt Drop Water Immersion Product Material Housings Seals Secondary Locks Contacts Size 6 contacts with 6AWG conductor - 00 mv drop max at 3A test current A mated connection, properly wired, placed in an oven at +25 C for hour, then placed immediately in a depth of water of meter for 4 hours without loss of electronic performance Thermoplastic Silicone Elastomer Thermoplastic Copper Alloy, Nickel Plated, Gold optional CONNECTOR SOLUTIONS AT Series Part Numbering Sequence AT 06-2 S A - *XXXX Amphenol EC0-End Cap Mod. (End Cap + Std Seal) Plug-06 Receptacle-04 No. of Positions: 2, 3, 4, 6, 08 or 2 RD0-Reduced Diameter Seal Mod. (Reduced Seal) SS0-Solid Seal w/ End Cap Mod. (End Cap + Solid Seal) MM0-Mixed Mod. (End Cap + Reduced Seal) SR0-Strain Relief Mod. (Std Seal) SR02-Strain Relief w/ Reduced Diameter Seal Mod. (Reduced Seal) Keying Options: A, B, C, D, X, X2 S-Socket P-Pin Plug & Receptacle Body Color Modification A wide range of standard color options are available for all A Series product lines. 8 and 2 position plugs and receptacles require special order. For more information, please contact a Sales Representative. Color Modification Number Color Modification Number Black XXXX-XXXX-BLK Yellow XXXX-XXXX-YEL White XXXX-XXXX-WHT Green XXXX-XXXX-GRN Brown XXXX-XXXX-BRN Blue XXXX-XXXX-BLU Grey XXXX-XXXX-GRY Red XXXX-XXXX-RED NOTE: The above modifications (-XXXX) are only a sampling of the options available to our customers. For more information, please contact your Sales Representative. 43
4 AT Series Connector Configurations STEP Choose a Plug MATING PARTS Standard s are required for all Plugs Strain Relief Or Choose a Plug Kit Reduced Diameter Seal End Caps STEP 2 Choose Contacts Plug Kit includes Plug, & Contacts End Caps with Reduced Diameter Seal Overmolded option page Or Choose a Plug & Receptacle Kit Solid Rear Seal wedgelock included LED Option Plug & Receptacle Kit includes Plug, Receptacle, & Contacts 44
5 Need a complete Cable Assembly? See page or contact the factory for assistance Toll Free: STEP 3 Choose a Receptacle Standard Strain Relief s are required for all Receptacles CONNECTOR SOLUTIONS Or Choose a Receptacle Kit Reduced Diameter Seal End Caps STEP 4 Choose Contacts Receptacle Kit includes Receptacle, & Contacts End Caps with Reduced Diameter Seal Overmolded option page Optional Protective Covers 45
6 AT 2 POSITIONS 3A AT SERIES STANDARD PLUGS, RECEPTACLES & WEDGELOCKS Contact Size 6 Wire Range (AWG) 4-20 AWG Amperage 3 Plug Part Number Description Part Number Description AT06-2S Plug, 2-Way AW2S Plug, 2-Way AT06-2S-KIT0 2 Socket Plug, Wedge and Contacts Kit Receptacle Part Number Description Part Number Description AT04-2P Receptacle, 2-Way AW2P Receptacle, 2-Way AT04-2P-KIT0 2 Pin Receptacle, Wedge and Contacts Kit Plug & Receptacle Kit Part Number Description AT2PS-CKIT 2-Way Pin and Socket Plug, Receptacle, Wedge and Contacts Kit Other Available Options: Strain Relief Series see page 56 Reduced Diameter Seal: see page 58 Endcaps: see page 62 Endcaps + Reduced Diameter Seal: see page 64 Protective Cover: see page 70 LED: see page 68 Terminating Resistors and Diodes: see page 73 Additional Colors: see page 43 Contacts sold separately on page 83 Tools on page 85 NOTE: s are required for all plugs. AT BOARD LOCK FLANGELESS WIRE TO BOARD CONNECTORS see page 77 AT PANEL MATE FLANGE MOUNT HARSH ENVIRNOMENT CONNECTORS see page 8 46
7 AT SERIES STANDARD PLUGS, RECEPTACLES & WEDGELOCKS A AT 3 POSITIONS 3A Plug Part Number Description Part Number Description AT06-3S Plug, 3-Way Contact Size 6 Wire Range (AWG) Amperage 3 AW3S 4-20 AWG Plug, 3-Way CONNECTOR SOLUTIONS AT06-3S-KIT0 3 Socket Plug, Wedge and Contacts Kit Receptacle Part Number Description Part Number Description AT04-3P Receptacle, 3-Way AW3P Receptacle, 3-Way AT04-3P-KIT0 3 Pin Receptacle, Wedge and Contacts Kit Plug & Receptacle Kit Part Number Description AT3PS-CKIT 3-Way Pin and Socket Plug, Receptacle, Wedge and Contacts Kit NOTE: s are required for all receptacles. Other Available Options: Strain Relief Series see page 56 Reduced Diameter Seal: see page 58 Endcaps: see page 62 Endcaps + Reduced Diameter Seal: see page 64 Solid Rear Seal: see page 66 Protective Covers: see page 70 Terminating Resistor: see page 73 J-939 Modifications: see page 7 Additional Colors: see page 43 Contacts on page 83 Tools on page 85 AT BOARD LOCK FLANGELESS WIRE TO BOARD CONNECTORS see page 77 AT PANEL MATE FLANGE MOUNT HARSH ENVIRNOMENT CONNECTORS see page 8 47
8 AT 4 POSITIONS 3A AT SERIES STANDARD PLUGS, RECEPTACLES & WEDGELOCKS Contact Size 6 Wire Range (AWG) 4-20 AWG Amperage 3 Plug Part Number Description Part Number Description AT06-4S Plug, 4-Way AW4S Plug, 4-Way AT06-4S-KIT0 4 Socket Plug, Wedge and Contacts Kit Receptacle Part Number Description Part Number Description AT04-4P Receptacle, 4-Way AW4P Receptacle, 4-Way AT04-4P-KIT0 4 Pin Receptacle, Wedge and Contacts Kit Plug & Receptacle Kit Part Number Description AT4PS-CKIT 4-Way Pin and Socket Plug, Receptacle, Wedge and Contacts Kit Other Available Options: Strain Relief Series see page 56 Reduced Diameter Seal: see page 58 Endcaps: see page 62 Endcaps + Reduced Diameter Seal: see page 64 Solid Rear Seal: see page 66 Protective Cover: see page 70 Additional Colors: see page 43 Contacts sold separately on page 83 Tools on page 85 NOTE: s are required for all plugs. AT BOARD LOCK FLANGELESS WIRE TO BOARD CONNECTORS see page 77 AT PANEL MATE FLANGE MOUNT HARSH ENVIRNOMENT CONNECTORS see page 8 48
9 AT SERIES STANDARD PLUGS, RECEPTACLES & WEDGELOCKS AT 6 POSITIONS 3A Contact Size 6 Wire Range (AWG) Amperage AWG Plug Part Number Description Part Number Description AT06-6S Plug, 6-Way AW6S Plug, 6-Way CONNECTOR SOLUTIONS AT06-6S-KIT0 6 Socket Plug, Wedge and Contacts Kit Receptacle Part Number Description Part Number Description AT04-6P Receptacle, 6-Way AW6P Receptacle, 6-Way AT04-6P-KIT0 6 Pin Receptacle, Wedge and Contacts Kit Plug & Receptacle Kit Part Number Description AT6PS-CKIT 6-Way Pin and Socket Plug, Receptacle, Wedge and Contacts Kit NOTE: s are required for all receptacles. Other Available Options: Strain Relief Series see page 57 Reduced Diameter Seal: see page 58 Endcaps: see page 63 Endcaps + Reduced Diameter Seal: see page 65 Solid Rear Seal: see page 66 Protective Covers: see page 70 Additional Colors: see page 43 Adapter 6 Pin to RJ45: see page 72 Contacts on page 83 Tools on page 85 AT BOARD LOCK FLANGELESS WIRE TO BOARD CONNECTORS see page 77 AT PANEL MATE FLANGE MOUNT HARSH ENVIRNOMENT CONNECTORS see page 8 49
10 AT 8 POSITIONS 3A AT SERIES STANDARD PLUGS, RECEPTACLES & WEDGELOCKS Contact Size 6 Wire Range (AWG) 4-20 AWG Amperage 3 Plug Part Number Description Part Number Description AT06-08SA Plug, 8-Way A Position* AW8S Plug, 8-Way AT06-08SA-KIT0 8 Socket Plug, Wedge and Contacts Kit Receptacle Part Number Description Part Number Description AT04-08PA Receptacle, 8-Way A Position* AW8P Receptacle, 8-Way AT04-08PA-KIT0 8 Pin Receptacle, Wedge and Contacts Kit Plug & Receptacle Kit Part Number Description AT8PS-CKIT 8-Way Pin and Socket Plug, Receptacle, Wedge and Contacts Kit *Alternate keying postions available (B,C,D) see page 5 Other Available Options: Strain Relief Series see page 56 Reduced Diameter Seal: see page 58 Endcaps: see page 62 Endcaps + Reduced Diameter Seal: see page 64 Solid Rear Seal: see page 66 Protective Cover: see page 70 Additional Colors: see page 43 Contacts sold separately on page 83 Tools on page 85 AT BOARD LOCK FLANGELESS WIRE TO BOARD CONNECTORS see page 77 AT PANEL MATE FLANGE MOUNT HARSH ENVIRNOMENT CONNECTORS see page 8 50
11 AT SERIES 8-WAY B,C,D POSITION KEY PLUGS, RECEPTACLES & WEDGELOCKS AT 8 POSITIONS- B,C,D Contact Size 6 Wire Range (AWG) 4-20 AWG Amperage 3 STANDARD CONNECTORS Plug Part Number Description AT06-08SB Plug, 8-Way, B Position,Black Part Number CONNECTOR SOLUTIONS AT06-08SC Plug, 8-Way, C Position, Green AW8S AT06-08SD Plug, 8-Way, D Position,Brown Receptacle Part Number Description Part Number AT04-08PB Receptacle, 8-Way,B Position, Black AT04-08PC Receptacle, 8-Way, C Position, Green AW8P AT04-08PD Receptacle, 8-Way, D Position, Brown Other Available Options: Reduced Diameter Seal page 58 Contacts on page 83 Tools on page 85 AT BOARD LOCK FLANGELESS WIRE TO BOARD CONNECTORS see page 77 AT PANEL MATE FLANGE MOUNT HARSH ENVIRNOMENT CONNECTORS see page 8 5
12 AT 2 POSITIONS 3A AT SERIES STANDARD PLUGS, RECEPTACLES & WEDGELOCKS Contact Size 6 Wire Range (AWG) 4-20 AWG Amperage 3 Plug Part Number Description Part Number Description AT06-2SA Plug, 2-Way A Position* AW2S Plug, 2-Way AT06-2SA- KIT0 2 Socket Plug, Wedge and Contacts Kit Receptacle Part Number Description Part Number Description AT04-2PA Receptacle, 2-Way A Position* AW2P Receptacle, 2-Way AT04-2PA- KIT0 2 Pin Receptacle, Wedge and Contacts Kit Plug & Receptacle Kit Part Number Description AT2PS-CKIT 2-Way Pin and Socket Plug, Receptacle, Wedge and Contacts Kit *Alternate keying postions available (B,C,D) see page 53 Other Available Options: Strain Relief Series see page 57 Reduced Diameter Seal: see page 58 Endcaps: see page 63 Endcaps + Reduced Diameter Seal: see page 65 Solid Rear Seal: see page 66 Protective Covers: see page 70 Additional Colors: see page 43 Adapter 2 Pin to RJ45: see page 72 Contacts on page 83 Tools on page 85 NOTE: s are required for all receptacles. AT BOARD LOCK FLANGELESS WIRE TO BOARD CONNECTORS see page 77 AT PANEL MATE FLANGE MOUNT HARSH ENVIRNOMENT CONNECTORS see page 8 52
13 AT SERIES 2-WAY B,C, D, X POSITION KEY PLUGS, RECEPTACLES & WEDGELOCKS AT 2 POSITIONS- B,C,D,X STANDARD CONNECTORS Plug Part Number Description AT06-2SB Contact Size 6 Wire Range (AWG) Amperage 3 2-Way Plug, Female Connector with B Position Key, Black 4-20 AWG Part Number CONNECTOR SOLUTIONS AT06-2SC 2-Way Plug, Female Connector with C Position Key, Green AT06-2SD 2-Way Plug, Female Connector with D Position Key, Brown AW2S AT06-2SX 2-Way Plug, Female Connector, X Position Key AT06-2SX2 2-Way Plug, Female Connector, X2 Position Key Receptacle Part Number Description Part Number AT04-2PB 2-Way Receptacle, Male Connector with B Position Key and Extended Shroud, Black AT04-2PC 2-Way Receptacle, Male Connector with C Position Key and Extended Shroud, Green AW2P AT04-2PD 2-Way Receptacle, Male Connector with D Position Key, Extended Shroud, Brown Other Available Options: Reduced Diameter Seal: see page 58 Contacts on page 83 Tools on page 85 AT BOARD LOCK FLANGELESS WIRE TO BOARD CONNECTORS see page 77 AT PANEL MATE FLANGE MOUNT HARSH ENVIRNOMENT CONNECTORS see page 8 53
14 AT 3 POSITIONS 3A, 25A AT SERIES 3-WAY STANDARD PLUGS & RECEPTACLES Contact Size 6 &2 Wire Range (AWG) 4-20 AWG/ 0-4 AWG Amperage 3, 25 MIXED CONNECTORS - POWER & SIGNAL Plug Part Number Description AT62-3SB 3-Way Plug, Female Connector with B Position Key, Black ( not required) Receptacle Part Number Description AT62-3PB 3-Way Receptacle, Male Connector with B Position Key, No Gasket, Black ( not required) AT62-3PB-G 3-Way Receptacle, Pin, Panel Mount, Self-Threading, Standard Seal, Cap, Keyed B. ( not required) AT62-3PBNF3 3-Way 90 Receptacle, Pin, Keyed B, PCB Mount ( not required, contacts included) REDUCED DIAMETER SEAL ( ) Plug Part Number Description AT62-3SB-RD 3-Way Plug, Female Connector with B Position Key and Reduced Diameter Seal (E-Seal), Black ( not required) Receptacle Part Number Description AT62-3PB-RD 3-Way Panel Mount Receptacle, Key Position B, No Gasket, Reduced Diameter Seal (E-Seal). Black. ( not required) AT62-3PB-RDG 3-Way, Flange Mount Receptacle, Gasket, Reduced Diameter Seal (E-Seal), Black. ( not required) Contacts on pages 83,0 Tools on page 85 Gasket on page 84 54
15 AT SERIES 8-WAY STANDARD PLUG AT 8 POSITIONS 3A Contact Size 6 Wire Range (AWG) 4-20 AWG Amperage 3 STANDARD CONNECTORS Plug Part Number Description AT6-8SB-K004 8-Way Plug with and End Cap Included CONNECTOR SOLUTIONS Contacts on page 83 Tools on page 85 55
16 AT STRAIN RELIEF 3A AT SERIES PLUG STRAIN RELIEF SERIES The AT Strain Relief Series specifically designed wire cavities protect each individual wire seal, eliminating stress on the rear seal, maintaining IP67 sealing performance regardless of wire bundle direction or improper installation. It is a cost-effective and highly-reliable solution for wire routing, strain relief and sealing issues common in Heavy Duty applications. It ensures a complete environmental seal and necessary strain relief on the production line and in the field. AT-SR0 has Standard Seals ( ) AT-SR02 has Reduced Diameter Seals ( seals) Plug Face View Part Number Description Part Number AT06-2S-SR0BLK Plug, 2-Way, Standard Seal AT06-2S-SR02BLK Plug, 2-Way, Reduced Seal AW2S A AT06-3S-SR0BLK Plug, 3-Way, Standard Seal AT06-3S-SR02BLK Plug, 3-Way, Reduced Seal AW3S AT06-4S-SR0BLK Plug, 4-Way, Standard Seal AT06-4S-SR02BLK Plug, 4-Way, Reduced Seal AW4S AT06-6S-SR0BLK Plug, 6-Way, Standard Seal AT06-6S-SR02BLK Plug, 6-Way, Reduced Seal AW6S AT06-08SA-SRGRY Plug, 8-Way, Position A, Standard Seal AT06-08SA-SR2GY Plug, 8-Way, Pos. A, Reduced Seal AW8S AT06-2SA-SRGRY Plug, 2-Way, Pos. A, Standard Seal AT06-2SA-SR2GY Plug, 2-Way, Pos. A, Reduced Seal AW2S Color options pertain to connector body only. (see page 43 for options.) NOTE: s are required for all plugs. 56
17 AT SERIES RECEPTACLE STRAIN RELIEF SERIES AT STRAIN RELIEF 3A The AT Strain Relief Series specifically designed wire cavities protect each individual wire seal, eliminating stress on the rear seal, maintaining IP67 sealing performance regardless of wire bundle direction or improper installation. It is a cost-effective and highly-reliable solution for wire routing, strain relief and sealing issues common in Heavy Duty applications. It ensures a complete environmental seal and necessary strain relief on the production line and in the field. AT-SR0 has Standard Seals ( ) AT-SR02 has Reduced Diameter Seals ( seals) Receptacle Face View Part Number Description AT04-2P-SR0BLK Receptacle 2-Way, Standard Seal Part Number CONNECTOR SOLUTIONS AT04-2P-SR02BLK Receptacle 2-Way, Reduced Seal AW2P A AT04-3P-SR0BLK Receptacle 3-Way, Standard Seal AT04-3P-SR02BLK Receptacle 3-Way, Reduced Seal AW3P AT04-4P-SR0BLK Receptacle 4-Way, Standard Seal AT04-4P-SR02BLK Receptacle 4-Way, Reduced Seal AW4P AT04-6P-SR0BLK Receptacle 6-Way, Standard Seal AT04-6P-SR02BLK Receptacle 6-Way, Reduced Seal AW6P AT04-08PA-SRGRY Receptacle 8-Way, Pos. A, Standard Seal AT04-08PA-SR2GY Receptacle 8-Way, Pos. A, Reduced Seal AW8P AT04-2PA-SRGRY Receptacle 2-Way, Pos. A, Standard Seal AT04-2PA-SR2GY Receptacle 2-Way, Pos. A, Reduced Seal AW2P Color options pertain to connector body only. (see page 43 for options.) NOTE: s are required for all receptacles. 57
18 AT REDUCED DIA. SEALS 3A AT SERIES PLUG REDUCED DIAMETER SEAL PLUGS Reduced Diameter Seals ( seals) Plug Face View Part Number Description AT06-2S-RD0 2-Way Plug, Female Connector with Reduced Diameter Seal (E-Seal) Part Number AT06-2S-RD0BLK 2-Way Plug, Black Female Connector with Reduced Diameter Seal (E-Seal) AW2S A AT06-3S-RD0 3-Way Plug, Female Connector with Reduced Diameter Seal (E-Seal) AT06-3S-RD0BLK 3-Way Plug, Black Female Connector with Reduced Diameter Seal (E-Seal) AW3S AT06-4S-RD0 4-Way Plug, Female Connector with Reduced Diameter Seal (E-Seal) AT06-4S-RD0BLK 4-Way Plug, Black Female Connector with Reduced Diameter Seal (E-Seal) AW4S AT06-6S-RD0 6-Way Plug, Female Connector with Reduced Diameter Seal (E-Seal) AT06-6S-RD0BLK 6-Way Plug, Black Female Connector with Reduced Diameter Seal (E-Seal) AW6S AT06-08SA-RD0 8-Way Plug, Female Connector with A Position Key, Reduced Diameter Seals (E-Seal) AT06-08SB-RD0 AT06-08SC-RD0 AT06-08SD-RD0 8-Way Plug, Female Connector with B Position Key and Reduced Diameter Seal (E-Seal), Black 8-Way Plug, Female Connector with C Position Key and Reduced Diameter Seal (E-Seal), Green 8-Way Plug, Female Connector with D Position Key and Reduced Diameter Seal (E-Seal), Brown AW8S NOTE: s are required for all plugs. 58
19 AT SERIES PLUG REDUCED DIAMETER SEAL PLUGS AT REDUCED DIA. SEALS 3A Reduced Diameter Seals ( seals) Plug Face View Part Number Description AT06-2SA-RD0 AT06-2SB-RD0 2-Way Plug, Female Connector with A Position Key and Reduced Diameter Seal (E-Seal) 2-Way Plug, Female Connector with B Position Key and Reduced Diameter Seal (E-Seal), Black Part Number CONNECTOR SOLUTIONS AT06-2SC-RD0 2-Way Plug, Female Connector with C Position Key and Reduced Diameter Seal (E-Seal), Green AW2S AT06-2SD-RD0 2-Way Plug, Female Connector with D Position Key and Reduced Diameter Seal (E-Seal), Brown 59
20 AT REDUCED DIA. SEALS 3A AT SERIES RECEPTACLE REDUCED DIAMETER SEAL Reduced Diameter Seals ( seals) Receptacle Face View Part Number Description Part Number AT04-2P-RD0 2-Way Receptacle, Male Connector with Reduced Diameter Seal (E-Seal) AT04-2P-RD0BLK 2-Way Receptacle, Black Male Connector with Reduced Diameter Seal (E-Seal) AW2P A AT04-3P-RD0 3-Way Receptacle, Male Connector with Reduced Diameter Seal (E-Seal) AT04-3P-RD0BLK 3-Way Receptacle, Black Male Connector with Reduced Diameter Seal (E-Seal) AW3P AT04-4P-RD0 4-Way Receptacle, Male Connector with Reduced Diameter Seal (E-Seal) AT04-4P-RD0BLK 4-Way Receptacle, Black Male Connector with Reduced Diameter Seal (E-Seal) AW4P AT04-6P-RD0 6-Way Receptacle, Male Connector with Reduced Diameter Seal (E-Seal) AT04-6P-RD0BLK 6-Way Receptacle, Black Male Connector with Reduced Diameter Seal (E-Seal) AW6P AT04-08PA-RD0 8-Way Receptacle, Male Connector with A Position Key, Reduced Diameter Seal (E-Seal) AT04-08PB-RD0 8-Way Receptacle, Male Connector with B Position Key and Reduced Diameter Seal (E-Seal). Black AT04-08PC-RD0 8-Way Receptacle, Male Connector with C Position Key and Reduced Diameter Seal (E-Seal), Green AW8P AT04-08PD-RD0 8-Way Receptacle, Male Connector with D Position Key and Reduced Diameter Seal (E-Seal), Brown NOTE: s are required for all receptacles 60
21 AT SERIES RECEPTACLE REDUCED DIAMETER SEAL AT REDUCED DIA. SEALS 3A Reduced Diameter Seals ( seals) Receptacle Face View Part Number Description AT04-2PA-RD0 AT04-2PB-RD0 2-Way Receptacle, Male Connector with A Position Key and Extended Shroud, Reduced Diameter Seal (E-Seal) 2-Way Receptacle, Male Connector with B Position Key and Reduced Diameter Seal (E-Seal). Black Part Number CONNECTOR SOLUTIONS AT04-2PC-RD0 2-Way Receptacle, Male Connector with C Position Key and Extended Shroud, Reduced Diameter Seal (E-Seal), Green AW2P AT04-2PD-RD0 2-Way Receptacle, Male Connector with D Position Key and Reduced Diameter Seal (E-Seal), Brown 6
22 AT END CAPS 3A AT SERIES PLUG END CAPS Modifications: Endcap over standard rear seal ( ) Plug Faceview Part Number Description Part Number AT06-2S-EC0 2-Way Plug, Female Connector with End Cap AT06-2S-EC0BLK 2-Way Plug, Black Female Connector with End Cap, Black AW2S AT06-3S-EC0 3-Way Plug, Female Connector with End Cap AT06-3S-EC0BLK 3-Way Plug, Black Female Connector with End Cap, Black AW3S AT06-4S-EC0 4-Way Plug, Female Connector with End Cap AT06-4S-EC0BLK 4-Way Plug, Black Female Connector with End Cap AW4S AT06-6S-EC0 6-Way Plug, Female Connector with End Cap AT06-6S-EC0BLK 6-Way Plug, Black Female Connector with End Cap AW6S AT06-08SA-EC0 8-Way Plug, Female Connector with A Position Key and End Cap AW8S AT06-2SA-EC0 2-Way Plug, Female Connector with A Position Key and End Cap AW2S NOTE: s are required for all plugs. 62
23 AT SERIES RECEPTACLE END CAPS AT END CAPS 3A Modifications: Endcap over standard rear seal ( ) Receptacle Faceview Part Number Description AT04-2P-EC0 AT04-2P-EC0BLK AT04-3P-EC0 2-Way Receptacle, Male Connector with End Cap 2-Way Receptacle, Black Male Connector with End Cap, Black 3-Way Receptacle, Male Connector with End Cap Part Number AW2P CONNECTOR SOLUTIONS AT04-3P-EC0BLK 3-Way Receptacle, Male Connector with End Cap, Black AW3P AT04-4P-EC0 4-Way Receptacle, Male Connector with End Cap AT04-4P-EC0BLK 4-Way Receptacle, Black Male Connector with End Cap, Black AW4P AT04-6P-EC0 6-Way Receptacle, Male Connector with End Cap AT04-6P-EC0BLK 6-Way Receptacle, Black Male Connector with End Cap, Black AW6P AT04-08PA-EC0 AT04-2PA-EC0 8-Way Receptacle, Male Connector with A Position Key and End Cap 2-Way Receptacle, Male Connector with A Position Key and Extended Shroud and End Cap AW8P AW2P NOTE: s are required for all receptacles. 63
24 AT END CAPS + REDUCED DIA. SEAL 3A AT SERIES PLUG END CAP + REDUCED DIAMETER SEAL Mixed modifications: Endcap plus reduced diameter seal ( ) Plug Face View Part Number Description AT06-2S-MM0 AT06-2S-MM0BLK 2-Way Plug, Female Connector with Reduced Diameter Seal (E-Seal) and End Cap 2-Way Plug, Black Female Connector with Reduced Diameter Seal (E-Seal) and Enhanced Seal Retention (P02) and End Cap Part Number AW2S A AT06-3S-MM0 3-Way Plug, Female Connector with Reduced Diameter Seal (E-Seal) and End Cap AT06-3S-MM0BLK 3-Way Plug, Black Female Connector with Reduced Diameter Seal (E-Seal) and End Cap AW3S AT06-4S-MM0 4-Way Plug, Female Connector with Reduced Diameter Seal (E-Seal) and End Cap AT06-4S-MM0BLK 4-Way Plug, Black Female Connector with Reduced Diameter Seal (E-Seal) and End Cap AW4S AT06-6S-MM0 6-Way Plug, Female Connector with Reduced Diameter Seal (E-Seal) and End Cap AT06-6S-MM0BLK 6-Way Plug, Black Female Connector with Reduced Diameter Seal (E-Seal) and End Cap AW6S AT06-08SA-MM0 8-Way Plug, Female Connector with A Position Key, Reduced Diameter Seals (E-Seal) and End Cap AT06-08SA-MMBLK 8-Way Plug, Black Female Connector with A Position Key, Reduced Diameter Seals (E-Seal) and End Cap AW8S AT06-2SA-MM0 2-Way Plug, Female Connector with A Position Key and Reduced Diameter Seal (E-Seal) and End Cap AT06-2SA-MM0BLK 2-Way Plug, Black Female Connector with A Position Key and Reduced Diameter Seal (E-Seal) and Enhanced Seal Retention(P02) and End Cap AW2S NOTE: s are required for all plugs. AT62-3SB-RD 3 Position Plug, Reduced Diameter Seal, End Cap not required 64
25 AT SERIES RECEPTACLE END CAP + REDUCED DIAMETER SEAL AT END CAPS + REDUCED DIA. SEAL 3A Mixed modifications: Endcap plus reduced diameter seal ( ) Receptacle Face View Part Number Description A AT04-2P-MM0 AT04-2P-MM0BLK AT04-3P-MM0 2-Way Receptacle, Male Connector with Reduced Diameter Seal (E-Seal) and End Cap 2-Way Receptacle, Black Male Connector with Reduced Diameter Seal (E-Seal) and End Cap 3-Way Receptacle, Male Connector with Reduced Diameter Seal (E-Seal) and End Cap Part Number AW2P CONNECTOR SOLUTIONS AT04-3P-MM0BLK 3-Way Receptacle, Black Male Connector with Reduced Diameter Seal (E-Seal)and End Cap AW3P AT04-4P-MM0 4-Way Receptacle, Male Connector with Reduced Diameter Seal (E-Seal) and End Cap AT04-4P-MM0BLK 4-Way Receptacle, Black Male Connector with Reduced Diameter Seal (E-Seal) and End Cap AW4P AT04-6P-MM0 6-Way Receptacle, Male Connector with Reduced Diameter Seal (E-Seal) and End Cap AT04-6P-MM0BLK 6-Way Receptacle, Black Male Connector with Reduced Diameter Seal (E-Seal) and End Cap AW6P AT04-08PA-MM0 8-Way Receptacle, Male Connector with A Position Key, Reduced Diameter Seal (E-Seal) and End Cap AT04-08PA-MMBLK 8-Way Receptacle, Black Male Connector with A Position Key, Reduced Diameter Seal (E-Seal) and End Cap AW8P AT04-2PA-MM0 2-Way Receptacle, Male Connector with A Position Key and Extended Shroud, Reduced Diameter Seal (E-Seal) and End CAP AT04-2PA-MMBLK 2-Way Receptacle, Black Male Connector with A Position Key and Extended Shroud, Reduced Diameter Seal (E-Seal) and End Cap AW2P NOTE: s are required for all receptacles 65
26 AT SOLID REAR SEAL 3A AT SERIES PLUGS SOLID REAR SEAL Modification: Solid Rear Seal + End cap for maintaing an environmental seal with unmated connectors Plugs Face View Part Number Description AT06-2S-SS0 2-Way Plug, Female Connector with Solid Rear Grommet. included A AT06-3S-SS0 3-Way Plug, Female Connector with Solid Rear Grommet. included AT06-4S-SS0 4-Way Plug, Female Connector with Solid Rear Grommet. included AT06-6S-SS0 6-Way Plug, Female Connector with Solid Rear Grommet. included AT06-08SA-SS0 8-Way Plug, Female Connector with A Position Key and Solid Rear Grommet. included AT06-2SA-SS0 2-Way Plug, Female Connector with A Position Key and Solid Rear Grommet. included 66
27 AT SERIES RECEPTACLES SOLID REAR SEAL AT SOLID REAR SEAL 3A Modification: Solid Rear Seal + End cap for maintaing an environmental seal with unmated connectors Receptacles Face View Part Number Description A AT04-2P-SS0 AT04-3P-SS0 2-Way Receptacle, Male Connector with Solid Rear Grommet 3-Way Receptacle, Male Connector with Solid Rear Grommet CONNECTOR SOLUTIONS AT04-4P-SS0 4-Way Receptacle, Male Connector with Solid Rear Grommet AT04-6P-SS0 6-Way Receptacle, Male Connector with Solid Rear Grommet AT04-08PA-SS0 8-Way Receptacle, Male Connector with A Position Key and Solid Rear Grommet AT04-2PA-SS0 2-Way Receptacle, Male Connector with A Position Key and Extended Shroud and Solid Rear Grommet 67
28 AT LED OPTIONS 3A/2 V 2 AT SERIES PLUG 2 VOLT LED OPTIONS Designed for electromechanical applications where a visible LED light is integrated into a 2 position plug allowing the user to determine the device is receiving power. Environmentally sealed, field serviceable and cost effective while reducing costly trouble shooting time. 2V and 24V versions available. 2 VOLT Part Part Number Description AT06-2S-LED20 2-Way, Plug, LED, 2V, Clear endcap, Grey Body, CLEAR LED (Requires P/N: AW2S-LED) AT06-2S-LED202 2-Way, Plug, LED, 2V, Clear endcap, Grey Body, Reduced Seal, SR0, CLEAR LED (Requires P/N: AW2S-LED) AT06-2S-LED220 2-Way, Plug, LED, 2V, Clear endcap, Grey Body, SR0, RED LED (Requires P/N: AW2S-LED) AWS2S-LED AT06-2S-LED230 2-Way, Plug, LED, 2V, Clear endcap, Grey Body, SR0, GREEN LED (Requires P/N: AW2S-LED) AT06-2S-LED2K 2-Way LED Plug Kit, 2V, Contacts and Wedge icluded, Grey, Clear endcap, CLEAR LED AT06-2S-LED2K2 2-Way LED Plug Kit, 2V, Contacts and Wedge icluded, Reduced Seal, Grey, Clear endcap, CLEAR LED Connector Body Colors: Gray 2V Black 24V LED Color Options: Clear Red Green 68
29 AT SERIES PLUG 24 VOLT LED OPTIONS 2 AT LED OPTIONS 3A/ 24V Features & Benefits Integral PCB Board/LED, Front and Rear Seals, and AT-SR0 End Cap Strain Reliefs come factory assembled on the Plug. Simply crimp the contact style of your choice...insert...snap the wedgelock into place. NO ADDITIONAL ASSEMBLY REQUIRED 24 VOLT Part Part Number Description AT06-2S-LED240 2-Way, Plug, LED, 24V, Clear Endcap, Black Body, CLEAR LED (Requires P/N: AW2S-LED) CONNECTOR SOLUTIONS AT06-2S-LED Way, Plug, LED, 24V, Clear Endcap, Reduced Seal, Black Body, CLEAR LED (Requires P/N: AW2S-LED) AT06-2S-LED Way, Plug, LED, 24V, Clear endcap, Grey Body, SR0, RED LED (Requires P/N: AW2S-LED) AWS2S-LED AT06-2S-LED Way, Plug, LED, 24V, Clear endcap, Black Body, SR0, GREEN LED (Requires P/N: AW2S-LED) AT06-2S-LED24K 2-Way LED Plug Kit, 24V, Contacts and Wedge icluded, Black, Clear endcap, CLEAR LED AT06-2S-LED24K2 2-Way LED Plug Kit, 24V, Contacts and Wedge icluded, Reduced Seal, Black, Clear endcap, CLEAR LED Solenoids Valves Sensors Manifolds Coils Diagnostics Electronic Controls Field Serviceable Cost-effective Quick diagnosis reduces troubleshooting time Environmentally-sealed for harsh environments Plug and Play - assembled the same as a standard connector *Certain chosen devices must be diode-protected 69
30 AT COVERS 3A AT SERIES RECEPTACLE PROTECTIVE COVERS Part Face View Part Number Description AT06-2S-CAP 2-way Protective Cover for Plug, Black AT06-3S-CAP 3-way Protective Cover for Plug, Black AT06-4S-CAP 4-way Protective Cover for Plug, Black AT06-6S-CAP 6-way Protective Cover for Plug, Black AT06-08S-CAP 8-way, All Keys Protective Cover for Plug, Black AT06-2S-CAP 2-way, All Keys Protective Cover for Plug, Black Mounting Hole provided on all sizes. Please go to and search by part number to view datasheets. 70
31 A A AT SERIES RECEPTACLE J-939 MODIFICATIONS AT J-939 3A J-939 Modifications - Plug, Receptacles & s AT Series J-939/, 3-Pin connectors offer a high performance, reliable and cost effective solution for the SAE 3 position CAN Network requirements. This series is designed to be completely compatible with existing industry standard J939/ connectors and provides a complete line of connectors including Y receptacles, network terminations with 20 ohm resistors, and keyed wedgelocks to prevent mis-mating. Additionally, the AT Series offers the SR0 Strain Relief series in both 3 way receptacles and plugs for critical J939 in-line connections requiring increased environmental protection and strain relief. Receptacle Face View Part Number Description A A A AT04-3P-RY0 Y Receptacle, 3-Way, Grey * included Part Number CONNECTOR SOLUTIONS AT04-3P- RJ20BK AT04-3P-RJ20 Receptacle, 3-Way, J-939,20 Ohm, Terminating Resistor, Black, * Included Recep., 3-Way, J-939, 20 Ohm, Terminating Resistor, Grey, * Included AW3P-939, 3-Way, J-939, Blue Plug Face View Part Number Description Part Number AT06-3S-SR- 0BLK Plug, 3-Way, Strain Relief, Black AW3S-939,Plug, 3-Way, J-939, Blue AW3S, Plug, 3-Way AT06-3S-RJ20 Plug, 3-Way, J-939, 20 Ohm Resistor, Grey, End Cap (Blue wedgelock included) AT06-3S-RJL20 Plug, 3-Way, J-939, 20 Ohm Resistor,, Grey, End Cap, Latch Guard (Blue wedgelock included) 7
32 AT ADAPTER 3A AT SERIES PLUG ADAPTER 6/2 PIN TO RJ45 Adapter, 6/2 Pin to RJ45 AT Series 6 Pin to RJ45 Adapters are developed to provide a direct connection between industry standard 6 position connectors and 8 position ethernet RJ45 connections. Part Face View Part Number Description NA P30307-XX ATRJ8-FSSR AT Series 6-Way Receptacle to RJ45 8-Way Receptacle AT Series 2-Way Receptacle to RJ45 8-Way Receptacle RJ Plug, Sealed Strain Relief, Field Installable/ Serviceable Assembly, 3/6-28 Thread Receptacles (RJ plug not included) 72
33 A A AT SERIES ELECTRONIC PACKAGING AT ELECTRONIC PACKAGING TERMINATING RESISTORS AND DIODES AT Series connectors are available with custom resistor values to meet specific application requirements. Consult Sales Representative for resistor, diode and other electronic packaging solutions. Part Face View Part Number Type Description AT04-2P-R20YEL Resistor AT04-2P-THM0K Thermistor 2-Way, Receptacle, 20 Ohm Resistor, NI Pins,, Yellow 2-Way, Receptacle, 0K Ohm Thermistor, NI Pins,, Red CONNECTOR SOLUTIONS AT04-2P-DIN4GRY Diode 2-Way, Receptacle, Diode, N4004, NI Pins,, Gray AT04-3P-RJ20BK Resistor 3-Way, Receptacle, J939-,20 Ohm Resistor, Gold Pins, Blue, Black AT04-3P-RJ20 Resistor 3-Way, Receptacle, J939-, 20 Ohm Resistor, Gold Pins, Blue, Gray AT04-4P-RK2K Resistor 4-Way, Receptacle,.2K & 2.7K Ohm Resistor, NI Pins,, Gray AT04-6P-R20BL Resistor 6-Way, Receptacle, 6 Gang Buss w/ 20 Ohm Resistor, Gold Pins,, Blue Part Face View Part Number Type Description AT06-2S-R20YEL Resistor 2-Way, Plug, 20 Ohm Resistor, NI Sockets, Standard, Yellow A AT06-3S-RJ20BK Resistor 3-Way, Plug, J939-, 20 Ohm Resistor, Gold Sockets, Blue, Black A AT06-3S-RJ20 Resistor 3-Way, Plug, J-939, 20 Ohm Resistor, End Cap, Blue, Grey A AT06-3S-R680 Resistor 3-Way, Plug, 680 Ohm Resistor, End Cap, Standard, Grey NOTE: Resistor is between A and B position. 73
34 AT CUSTOM AT SERIES CUSTOM PRODUCTS Extended Body AT Plugs Designed for Overmolding Custom Cable Assemblies are available for any application, and carry with them the capabilities of being overmolded in any size or length necessary. We have many specialized configurations. For more information, please contact a Sales Representative at Part Face View Part Number Description Wedglock AT06-2S-OMGRY 2-Way Custom Overmold Plug, Socket, Gray AT06-2S-OMBLK 2-Way Custom Overmold Plug, Socket, Black AT06-2S-OMBLU 2-Way Custom Overmold Plug, Socket, Blue AT06-2S-OMBRN 2-Way Custom Overmold Plug, Socket, Brown AT06-2S-OMGRN 2-Way Custom Overmold Plug, Socket, Green AW2S AT06-2S-OMRED 2-Way Custom Overmold Plug, Socket, Red AT06-2S-OMWHT 2-Way Custom Overmold Plug, Socket, White AT06-2S-OMYEL 2-Way Custom Overmold Plug, Socket, Yellow NOTE: These custom products are a sampling of the options available. For more options, please contact your Sales Representative. 74
35 Amphenol Sine Systems, USA Amphenol Tuchel Electronics, GmbH USA Amphenol Sine Systems Morley Drive Clinton Township, MI Toll-Free: Fax: Germany Amphenol Tuchel GmbH August-Haeusser-Strasse 0 Heilbronn, Germany Phone: 49(0) Fax: 49(0) info@amphenol.de China Amphenol Sine Systems Building 2, st Liao Keng Industrial Zone, Shi Yan Street, Bao An District Shenzhen, China 5880 Tel: ext Fax: USA Amphenol Corporation Corporate Headquarters 358 Hall Ave Wallingford Ct Phone: (877) Mexico Prolongacion Reforma 6-6 B2 Col. Paseo de las Lomas C.P Mexico DF, Mexico Phone: Fax: info@amphenolmexico.com Argentina Amphenol ARGENTINA Avenida Callao 930 2nd floor Office B Plaza C023AAP Buenos Aires, Argentina Phone: Fax: info@amphenol.com.ar amphenol.com.ar Brazil Amphenol do Brasil Ltda Rua Diogo Moreira, Andar, Rooms CEP Sao Paulo- SP, Brazil Phone: Fax: France Amphenol SOCAPEX 948, Promenade de l Arve - BP Thyez CEDEX, France Phone: 33(0) Fax: 33(0) United Kingdom Amphenol LIMITED Thanet Way, Whitstable Kent CT5 3JF, United Kingdom Phone: Fax: Australia Amphenol AUSTRALIA PTY LIMITED 22 Industry Boulevard Carrum Downs VIC 320 Australlia Phone: Fax: www. amphenol.com.au Turkey Amphenol International Ltd Turkey Sun Plaza Kat. 5 Maslak Mah. Bilim Sok. No Sisli / Istanbul Turkey Tel: Fax: South Africa Amphenol International Ltd South Africa 30 Impala Road 296 Sandton, Chislehurston South Africa Phone: Fax: sales@amphenolafrica.com India Amphenol INTERCONNECT INDIA PVT LTD 05 Bhosari Industrial Area Pune 4 026, India Phone: Fax: Korea Amphenol DAESHIN 558. Songnae-2 Dong. SoSa-Gu Bucheon City, Gyeonggi-do, Korea Phone: Fax: info@amphenol.co.kr www. amphenol.co.kr Japan Amphenol JAPAN 47-, Deba, Ritto-city shiga , Japan Phone: Fax: Russia Amphenol RUSSIA 8 Yaroslavskaja Street 2964 Moscow, Russia Phone: Fax: Catalog Number: ASERIES206
ATM SERIES ATM Series
SERIES Series CONNECTOR SOLUTIONS 21 Series Overview Series connectors are a high-performance, cost-effective solution specifically designed for smaller AWG applications, while still maintaining the strengths
ATP SERIES ATP Series
ATP SERIES ATP Series 87 ATP Series Overview ATP Series connectors are designed as a high-performance, cost-effective, thermoplastic solution to be used within the Marine, Heavy Equipment, Agricultural,
Amphenol Amphenol Sine Systems. A Series. Amphenol Transportation. Standard Products. Custom solutions.
Amphenol Amphenol Sine Systems AT Series ATM Series ATP Series AHD Series A Series Amphenol Transportation Standard Products. Custom Solutions. Standard products. Custom solutions. www.industrial-amphenol.com
Magna Mate Magna Mate
Magna Mate Magna Mate CONNECTOR SOLUTIONS 171 Magna Mate Series 2 Positions Designed to withstand the extreme conditions of the trucking, agricultural, mining, construction, and marine industries. Features
A Series Amphenol Transportation
Amphenol Amphenol Sine Systems AT Series ATM Series ATP Series AHD Series A Series Amphenol Transportation Standard Products. Custom Solutions. Standard products. Custom solutions. www.industrial-amphenol.com
Amphenol Amphenol-Tuchel Electronics GmbH. heavy mate. Heavy Duty Connectors Core Programme.
Amphenol Amphenol-Tuchel Electronics GmbH heavy mate Heavy Duty Connectors Core Programme www.industrial-amphenol.com heavy mate is a Modular Metal Connector Line Modular system With the new series heavy
Composite RJ45 and USB overmolded cordsets. Reinforced Infocom Connectors for Harsh Environment Rugged Digital Networks Solutions
Reinforced Infocom Connectors for Harsh Environment Rugged Digital Networks Solutions NEW Composite RJ45 and USB overmolded cordsets Connecting to people + technology www.rjfield.com 1 RUGGED ETHERNET
Interconnect Solutions. Amphenol Australia Pty Ltd
Interconnect Solutions by Amphenol is one of the largest manufacturers of interconnect products in the world. The company designs, manufactures and markets electrical, electronic and fiber optic connectors,
DT Connectors. Features. Connector
DT Connectors DEUTSCH DT Series connectors offer field proven reliability and rugged quality. The DT design strengths include optional flange mounting, multi-pin arrangements, lower cost, and design flexibility.
Interconnect Solutions for Entertainment, Audio, Broadcast & Lighting. Amphenol Australia Pty Ltd -
Interconnect Solutions for Entertainment, Audio, Broadcast & Lighting Amphenol Australia Pty Ltd - www.amphenolaudio.com Amphenol is one of the largest manufacturers of interconnect products in the world.
Amphenol. SCE Series Interconnect Solutions. the ultimate connection. For more information call Amphenol PCD
Amphenol the ultimate connection SCE Series Interconnect Solutions For more information call 210 372 0631 Amphenol PCD mhands@amphenolpcd.com SCE Snatch Connector Electrical Series The Ultimate Connector
New Product Releases 2018 & Solutions Guide Product Line Overview
Audio & Lighting Connectors Amphenol Audio, branded as Entertainment@Amphenol, headquartered in Melbourne, Australia, and represented in North America by Amphenol Sine Systems, provides an extensive range
CMC CP Terminals CP 0.635mm (.025 ) CP 1.50mm (.059 ) CP 2.80mm (.110 ) FEATURES AND SPECIFICATIONS
FEATURES AND SPECIFICATIONS CMC Connectors sealed, high-density, modular and cost-effective connection system for heavy-duty applications The CMC connector family from Molex is a sealed, high-density connection
0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY
![0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY](/thumbs/83/88977257.jpg "0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY")
ONLINE CATALOG SWITCHCRAFT, INC. N. Elston Ave. Chicago, IL 00 77 79-700 FAX: 77 79-19 www.switchcraft.com EN MINI WEATHERTIGHT CONNECTOR SERIES EN CORD CONNECTOR 1.8 [9.8] 0. REF 0.70 dia. [17.8] PIN
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
AT, ATM and ATP Series Kits Are Now Available!!!
Sine Systems AT, ATM and ATP Series Kits Are Now Available!!! Q: Why are we offering kits? A: Making kits available to our customers allows for reducing the number of part numbers necessary for any given
DRAGONFLY. Positronic Industries. Interconnection Systems. High Density Signal and Power Connectors.
DRAGONFLY Interconnection Systems High Density Signal and Power Connectors Positronic Industries High Density Signal and Power Interconnection Systems Dragonfly High Density Signal/ Power Interconnection
Connectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications
SMP/SMPM Applications DELTA ELECTRONICS MANUFACTURING CORP. Connectors High Performance to 65 GHz PDF Volume 1 Click Here for Table of Contents Click Here for Specifications (978) 927-1060 FAX (978) 922-6430
INDUSTRIAL COMMUNICATIONS EVERY CONNECTION COUNTS
INDUSTRIAL COMMUNICATIONS Networked manufacturing environments enable seamless communication, as well as greater speed and efficiency. In addition to data transfer among equipment on the factory floor,
HS-Lok Connector. Range Overview IP 68. Receptacle to Overmolded with Cable. In Line. HS-Lok Connector I Range Overview. Mated. Overmolded with Cable
HS-Lok Connector I Range Overview HS-Lok Connector IP 68 Mated Range Overview Receptacle to Receptacle In Line - Amphenol LTW Technology Co., Ltd. HS-Lok Connector I Specification Specification Identifications
Environmentally Sealed
Weather-Pack 16 Metri-Pack 19 AMP Superseal 24 Ampseal 16 27 M12 Network 30 DIN Connectors 31 Schlemmer / Din Conduit Sealed 32 Schlemmer / Din Contact Sealed 34 Ideal for applications requiring protection
254 Series HE701/HE901 Board to Board Interconnect Solutions
254 Series HE701/HE901 Board to Board Interconnect Solutions Amphenol Connecting people + technology www.amphenol-socapex.com 1 2 Amphenol HE7/HE9 Amphenol in brief Amphenol is one of the largest manufacturers
REP SERIES High Reliability Rectangular Plastic Connectors
REP SERIES High Reliability Rectangular Plastic Connectors Fire & Smoke standards compliance High Performance and safe connector Cost saving solution IP66 & IP67 sealing HIGH RELIABILITY The REP connector
Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
REP SERIES High Reliability Rectangular Plastic Connectors
REP SERIES High Reliability Rectangular Plastic Connectors Fire & Smoke standards compliance High Performance and safe connector Cost saving solution IP66 & IP67 sealing HIGH RELIABILITY The REP connector
Amphenol. Amphenol-Tuchel Electronics GmbH. Connectors Series C 148 U
mphenol mphenol-tuchel Electronics GmbH Connectors Series C 148 U Worldwide Performan The Company mphenol-tuchel Electronics GmbH is a global company and a leading manufacturer of electrical connector
LMD and LMS Modular Connectors
LMD and LMS Modular Connectors TABLE OF CONTENTS Amphenol LMD & LMS Modular Connectors Table of Contents............................... Introduction - Features, Benefits, Performance..00 Features, Options
High Reliability Rectangular Plastic Connector
High Reliability Rectangular Plastic Connector The REP connector is a multi pole IP66 sealed rectangular plastic connector which provides a quick, reliable and easy connection in all electronic applications.
Dura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
Amphenol. 608 Series. Amphenol Limited. Design Features. Circular Environmental Connectors Approved to BS9522 F0020 (Pattern 608)
Amphenol 608 Series Circular Environmental Connectors Approved to BS9522 F0020 (Pattern 608) CE30 Design Features Keyway Polarisation. Ni Aluminium Bronze Shells. Threaded Anti Vibration coupling mechanism.
Series 801 Mighty Mouse Double-Start ACME Thread Receptacle
Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How
Amphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
µcom-10gb + Amphenol MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro Connectors 15mm µcom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
µcom-10gb + MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors Amphenol Socapex
Harsh Environment 10Gb Ethernet Micro Connectors 15mm µcom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS Quick Reference Guide AMP-LATCH connectors are ribbon cable-to-board devices used to make the transition between ribbon cable and pc board circuitry. They
DT Series Technical Manual
Deutsch Industrial UK Stanier Road St. Leonards On Sea East Susse TN 9RF England Ph. (0) Fa (0) 99 industrialuk@deutsch.net Deutsch Industrial Europe Fraunhoferstrabe Martinsried Germany Ph. +9 (0) 9 990
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
RJF RB Ethernet connection system for harsh environment Industrial Ethernet
RJF RB Ethernet connection system for harsh environment Industrial Ethernet ROHS compliant RJFRB allows you to use an Ethernet Class D / Cat 5e and Class E / Cat 6 connection for 10 BaseT, 100 BaseTX or
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
400 Series Buccaneer BUCCANEER FOR POWER. IP68 rating tested at 1.054kg/sq cm (15lb/sq in) 10m depth for 2 weeks
IP68 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k 2 and 3 pole -, 250V rating 4, 6 and 8 pole -, 125V rating and 12 pole -, 50V
2.54mm Board to Cable Connectors Series LPV IEC Catalog E /05 Edition 1
2.54mm Board to Cable Connectors Series LPV IEC 60603-13 www.erni.com Catalog E 074546 05/05 Edition 1 www.erni.com Catalog E 074546 05/05 Edition 1 Table Of Contents Board to Cable Connectors Series LPV.....................................................................2
SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
Sales: Technical: Fax:
DATA SHEET Weatherproof Order code Manufacturer code Description 23-2650 PX0410/02S/5560 2 WAY FREE SOCKET MICRO BUCCANNEER 23-2652 PX0410/03S/5560 3 WAY FREE SOCKET MICRO BUCCANNEER (RC) 23-2654 PX0410/04S/4550
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
SW IP67 Waterproof Series - Part Numbering
SW IP67 Waterproof Series - Part Numbering Part Numbering Features Excellent performance at low cost Screw mounting assures solid connection Rubber gasket assures water resistance Manufactured with precision
Amphenol LTW Innovation in Waterproof Solution
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
Standard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
DEUTSCH AFD Series Connectors Qualified to MIL-DTL Series II
DEUTSCH AFD Series Connectors Qualified to MIL-DTL-26482 Series II Miniature Circular Connectors with Quick- Connect Bayonet Coupling and Environmental Sealing to Help Withstand Harsh Environments DEUTSCH
2.54 mm Single Row Connector (SRC) MaxiBridge.
2.54 mm Single Row Connector (SRC) www.erni.com Katalog Catalog D E 074593 074518 Ausgabe 02/10 3, 03/05 www.erni.com Edition 7 1 www.erni.com Catalog E 074593 02/10 Edition 7 Table of Contents General...2
SIM - CYLINDRICAL - PCB High Density Interconnect. Amphenol
SIM - CYLINDRICAL - PCB Interconnect Amphenol Amphenol is pleased to Introduce the Next Level of performance for Interconnect systems with a complete range of Higher Density products. The New HD Series
4000 Series Buccaneer
Sealed to IP66 IP68 and IP69K when mated IP68 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks 2, 3,, & 12 pole configuration Power ratings up to 13A, 600V Cable range from 3 to 7mm Diameter
Amphenol Amphenol-Tuchel Electronics GmbH
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors connecting life mate by Amphenol The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own
SMA - 50 Ohm Connectors
142-0701-621 4 142-0701-626 4 142-0701-631 4 142-0701-636 4 142-0701-701 7 142-0701-706 7 142-1701-011 5 142-1701-016 5 142-1701-031 4 142-1701-036 4 142-1701-041 5 142-1701-046 5 142-1701-121 5 142-1701-126
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
ELCO Memory Card Components
ELCO Memory Card Components Table of Contents ELCO PCMCIA PC Memory Card Components Host Device Components Introduction... 3 Features & Benefits... 4 PC Memory Card Components Selection Guide...5 Host
Amphenol Amphenol Tuchel Industrial GmbH C 16-3 C 16-L. Circular Connectors.
Amphenol Amphenol Tuchel Industrial GmbH C - C -L Circular Connectors www.amphenol-industrial.de Note from the CEO Ladies and Gentlemen, For over 75 years Amphenol has enjoyed success as the interconnection
Series 801 Mighty Mouse Double-Start ACME Thread Plug
Series 0 Mighty Mouse ouble-start ACME Thread Plug 0-00 and 0-00 Ordering Information Series 0 Series 0 Mighty Mouse Connector features a double-start modified stub ACME mating thread for improved protection
RJF TV Ethernet Connection System for Harsh Environment
RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
Accessories: PL-DTM06-12SA-12SB Mating Plug Kit (1 DTM06-12S, DTM06-12SB, 2 W12S, 24 contacts) Electronic Assistant Configuration KIT: AX070502
TECHNICAL DATASHEET #TDAX200000 4 Channel Strain Gauge CAN Controller CAN (SAE J1939) Features: 4 channels for inputs from 4-wire full bridge strain gauges: o +/- 19.5 mv to +/- 2.5 Vdc (selectable) 1
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
AEROSPACE, DEFENSE & MARINE /// DL AND DBA SERIES CONNECTORS
DEUTSCH DL and DBA Series Connectors Qualified to MIL-DTL-83723 Series III Weight-Saving Aluminum Connectors Designed for Rugged Use and High Temperatures DEUTSCH DL and DBA Series Connectors Weight-Saving
INTERCONNECT SOLUTIONS
INTERCONNECT SOLUTIONS Products Overview Connect with Us... Experience Makes the Difference Who We Are We have been designing and manufacturing interconnect products for over 40 years. Today we supply
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
2.54 mm Single Row Connector (SRC) MaxiBridge.
2.54 mm Single Row Connector (SRC) www.erni.com Katalog Catalog D E 074591 074518 02/10 Ausgabe 3, 03/05 Edition www.erni.com 7 1 www.erni.com Catalog E 074591 02/10 Edition 7 Table of Contents General..............................................................................................2
Terminal Junction System (MIL-T and Commercial)
Introduction Product Facts The TJS connections are inherently more reliable than conventional threaded and solder terminations. The user s wiring is crimped to gold plated pin contacts, conforming the
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
VARIOSUB D-SUB 25 Contact Inserts, Sleeve Housings
Contact Inserts, Sleeve Housings Introduction VARIOSUB is a range of plug connectors specially designed for signal and data technology in an industrial environment with high degrees of protection, temperatures
PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
Round Water-resistant Connectors (M12) XS2
Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant
Amphenol. Barracuda. ROHS Compliant. Environmental IP68 Sealed Connectors.
www.amphenol.co.uk Barracuda Environmental IP68 Sealed Connectors ROHS Compliant For more information call 01227 773200 Ltd, Thanet Way, Whitstable, Kent, CT5 3JF, England Environmental IP68 Sealed Connectors
Datasheet for
80 Morgan Street Rockford, Illinois 60 800-435-93 Datasheet for 76650-05 General Information Part Number: 76650-05 Manufacturer: Molex / Waldom Title: Deluxe Splashproof Application Kit Includes USB Type
Product Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
USBF TV (USB-A) ROHS COMPLIANT N & BZ. Amphenol. USB connection system for harsh environment. Part number code
USBF TV (USB-A) USB connection system for harsh environment ROHS COMPLIANT N & BZ With USB Field, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust
EPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
3 Series Thumbwheel Switches
Features/Benefits Most complete product offering in the industry Spacers available to fit most panel cutouts Front or rear mounting options Illuminated models available Typical Applications Test & measurement
Amphenol. Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN.
Amphenol Printed Circuit Board Technology NAFI + UHD CONNECTORS STANDARD. RELIABLE. PROVEN. FEATURES & BENEFITS Available in 2 through 4 rows - Offers maximum design flexibility Tested and qualified to
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
Connector System for Circular Contacts
Connector System for Circular Contacts Introduction The diameter 1.5 mm and diameter 2.5 mm Connector System is designed for electronic and electrical applications in motor vehicles. It fullfils all requirements
Key features: M5 Series. Buccaneer. Full Contact Diagrams Page 120
The most compact connector type in the MSeries range, Bulgin s waterproof M5 sensor connectors come in straight and angled forms with or overmolded cable option s and a variety of panel mount receptacles.
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
fischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1.
fischer connectors 4032 Series Plastic connectors Edition 1.2 MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION HIGH-PERFORMANCE IN A VERSATILE PACKAGE INSTRUMENTATION PERFECT PACKAGE www.fischerconnectors.com
Controller Area Networks
Controller Area Networks Contents CAN Overview PG 44 ISO Box and 9-pin Diagnostic PG 45 J1939/11 Schematics PG 46 J1939/15 Schematics PG 47 43 CAN Overview Controller Area Networks, or CAN are multiplex
PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
PRODUCT SPECIFCATION GS MINI-SAS HD External Cable to Board Connector System. 1 of 14 F. Roger Cheng TYPE NUMBER
1 of 14 F TABLE OF CONTENTS 1.0 OBJECTIVE... 3 2.0 SCOPE... 3 3.0 APPLICABLE DOCUMENTS... 3 3.1 FCI SPECIFICATIONS... 3 3.2 OTHER STANDARDS AND SPECIFICATIONS... 3 3.3 FCI PRODUCT QUALIFICATION TEST REPORTS...
HD Series. Signal Connector DIN Applicable Markets: Mil-Aero Space Marine
Signal Connector DIN 41612 HDC and HDD interchangeable with DIN41612 C and D 0.6 mm and 1.0 mm Hypertac contacts, in a two or three row format Up to 192 positions HDT style offers mixed arrangements with
DIN Molded Cable Assemblies
DIN 43650 Telephone (973) 586-500 FAX (973) 596-590 DIN 43650 8mm For Solenoid Valve Applications Black PVC Cable & Connector DUAL JUMPED GROUND PINS Molded cable assemblies can be mounted with cable exiting
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
MRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position
SN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
UTS UTS. UTS provides a connection that performs faster, easier, safer and more reliable, it makes :
Company Profile UTS Contents Company profile... 2 Contents... 3 Description... 3 Overview TRIM TRIO... 4 Major features & benefits 5-9 Contact styles... 5 Rapid and secure locking system... 6 Rapid and
Amphenol Overmolded Ethernet and USB solutions
Overmolded Ethernet and USB solutions table of contents USBA Field...3 USB B Field...4 USB MINI B Field...5 HDMI Field...6 RJ45 Field...7 2 USB-A FIELD Plastic shell - Overmolded cordset ROHS compliant