LMD and LMS Modular Connectors

Size: px

Start display at page:

Download "LMD and LMS Modular Connectors"

Olivia Octavia Hardy
6 years ago
Views:

LMD and LMS Modular Connectors TABLE OF CONTENTS Amphenol LMD & LMS Modular Connectors Table of Contents............................... Introduction - Features, Benefits, Performance.

1 LMD and LMS Modular Connectors TABLE OF CONTENTS Amphenol LMD & LMS Modular Connectors Table of Contents Introduction - Features, Benefits, Performance..00 Features, Options & Data LMD Housings - How to Order LMD Arrangements , 0 LMD Bussing s... 0 LMD Diode s & Relay s...0 LMD Accessories LMD Assembly Instructions , 0 LMS In-Line Splice Connector LRM LMD Typical & LMS Typical Markets: Markets: Military Commerical & Commercial Avionics Aviation Military Avionics Vehicles Instrumention Missiles/Ordnance CISR Space Radar Amphenol Amphenol for more information at

Amphenol LMD and LMS Modular Connectors for or Cable Attachment INTRODUCTION: FEATURES, BENEFITS, PERFORMANCE LRM (Line Replaceable s) Staggered/ GEN-X Hybrids - Fiber Optics/ /RF/Power Options/

2 Amphenol LMD and LMS Modular Connectors for or Cable Attachment INTRODUCTION: FEATURES, BENEFITS, PERFORMANCE LRM (Line Replaceable s) Staggered/ GEN-X Hybrids - Fiber Optics/ /RF/Power Options/ Accessories VMEx / VITA 0, HSB HDB Low Mating Force MIL-DTL-0 Hybrids - Signal/Power/ Coax/Fiber Optics Docking Conn./ Accessories/Install. LMD Modular Connectors The LMD Connector Series was designed by Amphenol Pyle-National to provide flexibility in the assembly of wire harnesses that are used in instrumentation and avionic control environments. The modular design of the LMD provides rack and panel or cable to cable attachment. Design Features of LMD Connectors An LMD Connector is comprised of a housing, modules and contacts - each ordered separately, requiring assembly Lightweight housings are offered in two materials standard black thermoplastic high performance composite material for EMI shielding white thermoplastic nylon material with increased solvent resistance Four standard modules are available with the following contact arrangements: #, #, #0, # s are available in sealed and unsealed versions Linear module design may be used for rack and panel or cable to cable applications Bussing modules available to allow for a plurality of circuit network configurations without extra hardware Diode modules provide a current protection system for avionic instrumentation packages and eliminate the need for dedicated PC boards and other hardware Miniature relay modules can be added which eliminate the need for printed circuit boards and hardware LMD Receptacle and Plug LMD Benefits Reduces assembly and production costs Eliminates costly PC board and associated hardware Reduces inventory levels and associated costs Allows for a variety of circuit configurations Permits ease of circuit upgrading Facilitates equipment maintenance LMD Performance Characteristics Temperature Rating C to +0 C (- F to + F) Insulation Resistance (min.) Durability Vibration Physical Shock Insertion & Removal Force Retention 000 megohms initial: 000 megohms after hours humidity 0 cycles (mating and unmating) Maximum discontinuity of one microsecond when subjected to sinusoidal vibration of 0 to 000 Hz at gravity units Maximum discontinuity of one microsecond when subjected to / -sine-wave transient shock of 0 gravity units with pulse duration of milliseconds lbs. maximum 0 lbs. minimum LMS Modular Connectors Supplementing the LMD connector family, Amphenol/Pyle National offers the LMS in-line splice connector; a low cost interconnects that incorporates the LMD modules and contacts. LMS splice connector - -piece assembly with module removal tool access Tool-less splice connector - -piece assembly with a push-button module release for easy module removal Two-piece bracket available for panel mounting Used in wire harness, instrument and equipment terminations and test points LMS Tool-less Splice Connector 00 Amphenol for more information at

3 LMD Modular Connectors FEATURES, OPTIONS & CONTACT DATA Amphenol Strain Reliefs LMD Receptacle Variety of s available. (accept # through # AWG wire) LMD Features and Options LMD s module options provide a mix of both active and passive devices within one connector. The features and options of this series describe the design flexibility in this connector series: LMD components are molded of a U/L rated VO flame retardant, light-weight thermoplastic material. Alternate white nylon material (provides resistance to industrial oils and solvents) is available; consult Amphenol for availability. The linear LMD connector may be used for rack and panel or cable-to-cable applications. Plug and receptacle housings may be front or rear panel mounted. Optional keying post provides six position keying capability. The optional center jackscrew provides ease of mating and unmating and insures high reliability under vibration. Cable strain reliefs are available for internal attachment. (See page 0). Variety of module types. Sealed and unsealed modules accept rear release #, #, #0 and # gauge contacts. Bussing, diode and relay modules available. PC tail contacts are also available; consult Amphenol. A variety of contacts accept # through # AWG wire. Commercially available automated crimp terminating equipment may be used. Wired or unwired modules are rear inserted and held by two retention tines. With the aid of a front release tool, the modules are easily removed from the rear. (See pg. 0). Pin or socket modules may be intermixed in plug or receptacle housings. Optional Keying Post (Six position keying capability) Data 0 * 0 * Wire Wire * with # wire well LMD Plug Resistance Test Current (amperes) Max. Millivolts 0 Crimp Tensile Strength Lbs. Min Optional Center Jackscrew Pin or Socket s (may be intermixed in plug or receptacle housings Sealed or unsealed, accept rear release #, #, #0 and # gauge contacts (See pages 0-0 for the variety of module types available) Dielectric Withstanding Voltage AC (RMS) Max. Recommended Working Voltage AC (RMS) Max. Wire Insulation LRM (Line Replaceable s) Staggered/ Hybrids - Fiber Optics/ Options/ GEN-X /RF/Power Accessories VME x/ VITA 0, HDB HSB Hybrids - Signal/Power/ Docking Conn./ Coax/Fiber Optics Accessories/Install. Low Mating Force MIL-DTL-0 Amphenol for more information at

4 LMD Modular Connectors LMD HOUSINGS - HOW TO ORDER LRM (Line Replaceable s) Staggered/ GEN-X Hybrids - Fiber Optics/ /RF/Power Options/ Accessories VMEx / VITA 0, HSB HDB Low Mating Force MIL-DTL-0 Hybrids - Signal/Power/ Coax/Fiber Optics Docking Conn./ Accessories/Install. HOW TO ORDER LMD HOUSINGS Housings are ordered separately from modules and contacts. Housings are available with bays. Typical housing part number is shown as follows:. Connector Type LMD. Housing Material 0 designates standard black thermoplastic designates white thermoplastic nylon material - F consult Amphenol for availability. Number of s. Connector Type P R. Coupling Mechanism J K E designates jack-socket, rotating designates jack-screw, fixed designates without coupling mechanism. Alternate Keying positions of keying post:,,,, or cavities in plug or receptacle housing (available in only) designates plug designates receptacle Housing Material Number of s Connector Type Coupling Mechanism Alternate Keying LMD -0 P J designates keying hardware shipped unassembled for field assembly designates no alternate keying hardware. Keyed through housing only. Ordering information on modules, contacts and strain reliefs is given on other pages of this LMD catalog section that follow. RECEPTACLE HOUSING BAY.0 (.0). (.) REF. MOUNTING HOLE FOR # SCREW TYPICAL.00 (.) PLUG HOUSING BAY.0 (.0).0 (.). (.) B C D A E F JACK SCREW KEYING MECHANISM. (.) REF. MOUNTING HOLE FOR # SCREW TYPICAL F E.0 (0.) KEY POSITION INDICATOR ( KEY POSITIONS).0 (.). (.) D #- THREAD #0- NUT FOR CHANGING KEY POSITION C.0 (0.) KEY POSITION INDICATOR ( KEY POSITIONS) B #- THREAD A. (.).000 (.0) JACK SOCKET KEYING MECHANISM. (.) HEX. (.) 0 Amphenol for more information at

5 LMD Modular Connectors MODULE CONTACT ARRANGEMENTS Amphenol s and contacts for LMD connectors are sold separately from housings. s with s. (.) Socket LMD-00-S Pin LMD-00-P s with 0 s. (.) Socket LMD-00-S 0.00 (.0). (.).00 (.0). (.) LOCATING SHOULDER 0. (.) LOCATING SHOULDER Pin LMD-00-P. (.). (.). (.) WIRE SEAL.00 (.0). (.0) Sealed Socket LMD-00-S. (.). (.) part numbers are for black thermoplastic material. Consult Amphenol for availability of any other module materials. Sealed Socket LMD-00-S 0 WIRE SEAL 0 LOCATING SHOULDER.00 (.0) INTERFACIAL SEAL. (.). (.) Sealed Pin LMD-00-P LOCATING SHOULDER. (.0) Sealed Pin LMD-00-P INTERFACIAL SEAL. (.). (.) Pin LMD-0-LJ.0 (.).0 (.).0 MAX. (.0) MAX.. (.). (.) GREEN INK STRIPE Socket LMD--LD.0 (.). MAX. (.) MAX.. (.) GREEN INK STRIPE Finish: Gold Plated.0 (.) Pin 0 LMD-00-LD Thermocouple : LMD-00-0( )*.0 (.).0 (.) RED INK STRIPE.0 MAX. (.) MAX.. (.).0 (0.) Socket 0 LMD-0-LD Thermocouple : LMD-0-0( )*.0 (.).0 (.). MAX. (.) MAX.. (.).0 (0.) RED INK STRIPE.00 (0.).00 (.0).0 (.) Finish: Gold Plated *Complete thermocouple part number with code letter for desired contact material as follows: P = Chromel R = Alumel N = Constantan C = Copper LRM (Line Replaceable s) Staggered/ Hybrids - Fiber Optics/ Options/ GEN-X /RF/Power Accessories VME x/ VITA 0, HDB HSB Hybrids - Signal/Power/ Docking Conn./ Coax/Fiber Optics Accessories/Install. Low Mating Force MIL-DTL-0 Amphenol for more information at

6 LMD Modular Connectors MODULE CONTACT ARRANGEMENTS, CONT. LRM (Line Replaceable s) Staggered/ GEN-X Hybrids - Fiber Optics/ /RF/Power Options/ Accessories VMEx / VITA 0, HSB HDB Low Mating Force MIL-DTL-0 Hybrids - Signal/Power/ Coax/Fiber Optics Docking Conn./ Accessories/Install. s and contacts for LMD connectors are sold separately from housings. s with s. (.) Socket LMD-00-S.00 (.0). (.) LOCATING SHOULDER. (.) Pin LMD-00-P s with s.00 (.0). (.). (.). (.).0 DIA. (0. DIA.) Socket LMD-00-S part numbers are for black thermoplastic material. Consult Amphenol for availability of any other module materials. LOCATING SHOULDER Pin LMD-00-P. (0.0). (.). (.). (.).0 DIA. (0. DIA.) Sealed Socket LMD-00-S.00 (.0) WIRE SEAL. (.0) Sealed Pin LMD-00-P Pin LMD-00-L.0 (.) Socket LMD-0-L.0 (.). (.). (.) Finish: Gold Plated LOCATING SHOULDER INTERFACIAL SEAL. (.). (.). MAX. (.) MAX.. (.0).0 (.). MAX. (.) MAX.. (.).0 (.) Pin LMD-0-LD Thermocouple : LMD-0-0( )*. (.).0 (.). MAX. (0.) MAX.. (.).0 (.) BLUE INK STRIPE Socket LMD--LD Thermocouple : LMD--0( )*. (.).0 (.). MAX. (0.) MAX.. (.).0 (.) BLUE INK STRIPE.0 (.). (.) Finish: Gold Plated *Complete thermocouple part number with code letter for desired contact material as follows: P = Chromel R = Alumel N = Constantan C = Copper. (.). (.) 0 Amphenol for more information at

LMD Modular Connectors BUSSING MODULES - FOR PLURAL CIRCUIT NETWORKS Amphenol Bussing s were designed by Amphenol Pyle-National to provide a complete terminal junction system.

7 LMD Modular Connectors BUSSING MODULES - FOR PLURAL CIRCUIT NETWORKS Amphenol Bussing s were designed by Amphenol Pyle-National to provide a complete terminal junction system. This module conveniently and simply allows for a plurality of circuit network configurations, eliminated the need for pigtails, termination strips or termination hardware. Nine bussing configurations are currently available* in either a standard or sealed module. Sealed modules have a rubber interfacial seal for increased environmental resistance. LMD Bussing s are currently available in black thermoplastic material.** s with s s with 0 s.00 (.0) s with s Front View LMD Bussing 0 LMD P LMD P LMD P Sealed LMD P Bussing Configuration (Rear View) Bussing Circuits A. Ref. LMD-00-P LMD-0-P 0. LMD-00-P LMD-0-P 0. LMD-00-P LMD-0-P 0. LMD-00-P LMD-0-P. LMD-00-P LMD-0-P. LMD-00-P LMD-0-P. LMD-00-P LMD-0-P. LMD-00-P LMD-0-P. LMD-00-P LMD-0-P 0. * For other circuit network configurations, consult Amphenol. LMD P LMD P ** For availability of materials other than standard black thermoplastic, consult Amphenol. LMD P VISUAL INDICATOR PART NUMBER BUSSING DESIGNATOR CONTACT NUMBER LMD P LMD P Bussing A REF.. (.) PRINTED CIRCUIT BOARD Sealed Bussing A REF..0 REF. (.) REF. PRINTED CIRCUIT BOARD INTERFACIAL SEAL Side View LRM (Line Replaceable s) Staggered/ Hybrids - Fiber Optics/ Options/ GEN-X /RF/Power Accessories VME x/ VITA 0, HDB HSB Hybrids - Signal/Power/ Docking Conn./ Coax/Fiber Optics Accessories/Install. Low Mating Force MIL-DTL-0 Amphenol for more information at

LMD Modular Connectors DIODE MODULES & RELAY MODULES LRM (Line Replaceable s) Staggered/ GEN-X Hybrids - Fiber Optics/ /RF/Power Options/ Accessories VMEx / VITA 0, HSB HDB Low Mating Force MIL-DTL-0

configurations represent standard system and test application requirements.* Diode s eliminate dedicated PC boards and other assorted hardware.

8 LMD Modular Connectors DIODE MODULES & RELAY MODULES LRM (Line Replaceable s) Staggered/ GEN-X Hybrids - Fiber Optics/ /RF/Power Options/ Accessories VMEx / VITA 0, HSB HDB Low Mating Force MIL-DTL-0 Hybrids - Signal/Power/ Coax/Fiber Optics Docking Conn./ Accessories/Install. Diode s provide a current protection system for Avionic instrumentation packages. configurations represent standard system and test application requirements.* Diode s eliminate dedicated PC boards and other assorted hardware. These modules are available in sealed type only, incorporating an interfacial seal for environmental protection, and are manufactured of black thermoplastic material.** Diode s with s REF. REF..00 (.0) Diode s with 0 s REF. REF..00 (.0) Front View Side View Diode Configuration (Rear View) LMD Diode Circuit Description LMD--P discrete diodes LMD--P pair of diodes, each pair with common cathode LMD--P diodes with common cathode (pin #) LMD-0-P 0 discrete diodes LMD-0-P 0 pair of diodes, ear pair with common cathode LMD-0-P 0 diodes with common cathode (pin #) Relay s incorporate an industry standard miniature relay per MIL-R-0 specification part number 0/-0L* These modules eliminate the need for PC boards and all related hardware. These modules are available in unsealed and sealed types as shown below, and are manufactured of black thermoplastic material.** RELAY MODULES 0.00 (.0) CENTER CAVITY NOT USED.00 DIA. (.0 DIA.).0 REF. (.) REF.. REF. (.) REF. N 00 INTERFACIAL SEAL. REF. (.) REF..0 REF. (.) REF. N 00 INTERFACIAL SEAL. (.). (.). (.).0 REF. (.) REF. LMD - - P 0 LMD P ELECTROMAGNETIC RELA MIL-R-0 SPECIFICATIO PART NUMBER M0/ VISUAL INDICATOR LMD P + RELAY SCHEMATIC MARKED ON REAR OF MODULE LMD - - P 0 LMD P 0 LMD Relay Sealed LMD-00-P LMD - - P LMD P LMD-0-P Sealed INTERFACIAL SEAL Front View Side View Relay Configuration (Rear View) * For other circuit network configurations, consult Amphenol. ** For availability of materials other than standard black thermoplastic, consult Amphenol. 0 Amphenol for more information at

LMD Accessories STRAIN RELIEFS, CRIMPING, INSERTION/REMOVAL TOOLS Amphenol Strain Relief for Internal Attachment of Wiring LMD-00-0A Two-piece strain relief with cable tie included, for internal

CABLE TIE RECEPTACLE HOUSING LMD-0R PYLE-NATIONAL PYLE-NATIONAL CABLE ACCOMMODATION. /.0 DIA. (.) / (0.) DIA. PLUG HOUSING LMD-0P. (.) REF.

9 LMD Accessories STRAIN RELIEFS, CRIMPING, INSERTION/REMOVAL TOOLS Amphenol Strain Relief for Internal Attachment of Wiring LMD-00-0A Two-piece strain relief with cable tie included, for internal attachment to LMD bay connector housings. Molded in black thermoplastic material. LMD TOOLS TWO-PIECE STRAIN RELIEF RETAINING S. (.) REF. CABLE TIE RECEPTACLE HOUSING LMD-0R PYLE-NATIONAL PYLE-NATIONAL CABLE ACCOMMODATION. /.0 DIA. (.) / (0.) DIA. PLUG HOUSING LMD-0P. (.) REF. LRM (Line Replaceable s) Staggered/ Hybrids - Fiber Optics/ Options/ GEN-X /RF/Power Accessories Crimping Tool for s Crimping Tool For Pin Positioner For Socket Amphenol/Pyle Number TP-00-H TP-00 TP Military Number M0/-0 M0/-0 Crimping Tool for 0 & s Crimping Tool Turret Head Amphenol/Pyle Number TP-0 TP-0 Military Number M0/-0 M0/-0 Crimping Tool for s Crimping Tool Locator Amphenol/Pyle Number TP-0 TP-00 Military Number Insertion/Removal Tools Color Amphenol/Pyle 0 For s Wire Military Green 0--D MIL-I-/-0 0 Red 0--0 MIL-I-/-0 Blue 0--0 MIL-I-/-0 Red TP-00 MIL--/-0 LMD Removal Tool TP-0 See photo on page 0 of module removal with this tool. LMD tools can be purchased from Daniels Manufacturing Company. Wire 0 0 Crimp Tool Selector Setting Wire Crimp Tool Selector Setting No. No. No. No. Crimp Tool Selector Setting No. No. No. No. No. No. For s with # Wire Well Wire Crimp Tool Selector Setting 0 No. No. No. No. VME x/ VITA 0, HDB HSB Hybrids - Signal/Power/ Docking Conn./ Coax/Fiber Optics Accessories/Install. Low Mating Force MIL-DTL-0 Amphenol for more information at

LMD Assembly Instructions CRIMPING, INSERTION & REMOVAL OF CONTACTS Amphenol recommends the tools listed on the preceding page for use with LMD connectors, and also the following procedures for

LRM (Line Replaceable s) Staggered/ GEN-X Hybrids - Fiber Optics/ /RF/Power Options/ Accessories VMEx / VITA 0, Wire Preparation A Strip wires to dimension A shown in table at right.

.. -0 AWG... Low Mating Force MIL-DTL-0 Hybrids - Signal/Power/ Coax/Fiber Optics HSB HDB Docking Conn./ Accessories/Install.. Fully insert wire into contact crimp pocket.

Tool will not open if contact is not fully crimped.. After crimping, wire should be visible through wire inspection hole.

shoulder against end of tool. Align contact with the cavity at the rear face of the module. Carefully push the contact into the full depth of the cavity. Withdraw tool.

10 LMD Assembly Instructions CRIMPING, INSERTION & REMOVAL OF CONTACTS Amphenol recommends the tools listed on the preceding page for use with LMD connectors, and also the following procedures for wire preparation, crimping of wire and contact insertion and removal. LRM (Line Replaceable s) Staggered/ GEN-X Hybrids - Fiber Optics/ /RF/Power Options/ Accessories VMEx / VITA 0, Wire Preparation A Strip wires to dimension A shown in table at right. Avoid cutting or nicking wire strands. Crimping Wire to s Follow steps - for proper contact crimping. Wire Max. O. D. Insulation Stripping Length Dimension A 0--- AWG AWG AWG (with # crimp) - AWG AWG... Low Mating Force MIL-DTL-0 Hybrids - Signal/Power/ Coax/Fiber Optics HSB HDB Docking Conn./ Accessories/Install.. Fully insert wire into contact crimp pocket. Wire must be visible through wire inspection hole.. Insert contact into tool (use proper crimping tool as listed on preceding page). Crimp contact to wire. Tool will not open if contact is not fully crimped.. After crimping, wire should be visible through wire inspection hole. Insertion Removal Using proper insertion/removal tool as listed on previous page, slip wire into insertion end (colored end), placing crimp end of contact inside the slotted portion and contact shoulder against end of tool. Align contact with the cavity at the rear face of the module. Carefully push the contact into the full depth of the cavity. Withdraw tool. A slight axial pull on the wire will confirm contact is locked in proper position. Snap the extraction end (white end) of the tool over the wire of the contact selected for removal. Carefully push the tool into the full depth of the contact cavity releasing the contact retaining collet. Hold the wire against the serrations on the tool, and withdraw the tool and the wired contact from the module. 0 Amphenol for more information at

LMD Assembly Instructions MODULE INSERTION/REMOVAL & USE OF STRAIN RELIEF Amphenol Pin or socket modules, wired or unwired, can be inserted or intermixed in plug or receptacle housings.

The next instructions illustrate the proper method of insertion and removal of modules within the LMD connector. Insertion Align the module with the proper cavity at the rear of the housing.

A slight axial push on the front of the module or a pull on the cable bundle will confirm module is locked in proper position.

Push the removal tool into the full depth of the cavity, releasing the module retention tines.

The following is instruction for assembling the internal attachment strain relief, part number LMD-00-0A (see page 0).

11 LMD Assembly Instructions MODULE INSERTION/REMOVAL & USE OF STRAIN RELIEF Amphenol Pin or socket modules, wired or unwired, can be inserted or intermixed in plug or receptacle housings. Select from standard module configurations shown on pages 0 & 0, or select the optional bussing, diode or relay modules offered, shown on pages 0 & 0. The next instructions illustrate the proper method of insertion and removal of modules within the LMD connector. Insertion Align the module with the proper cavity at the rear of the housing. The module keyway must be positioned to accept key in housing cavity. Carefully insert the module straight in to the cavity until fully seated and locked in place. A slight axial push on the front of the module or a pull on the cable bundle will confirm module is locked in proper position. Select module to be removed and place the blades of removal tool into the removal slots at the front of the connector. Push the removal tool into the full depth of the cavity, releasing the module retention tines. Assembly of Internal Strain Relief Strain reliefs, if required, may be assembled to plug or receptacle connectors which have a full complement of modules installed. The following is instruction for assembling the internal attachment strain relief, part number LMD-00-0A (see page 0). Removal With the module removal tool fully inserted, push the extraction plunger to eject the module out of the rear of the connector. Opening Strain Relief to Service s and s Internal attachment strain reliefs may be opened to provide module and/or contact accessibility. To service connectors, first cut and discard tie-strap on strain relief. Open strain relief halves approx. each by bending along integral flexible hinge. After servicing, close strain relief halves and install and tighten new tie-strap. To completely remove strain relief from the housing in order to provide module access; first remove tie-strap, open strain relief halves each, then remove module, then remove strain relief. LRM (Line Replaceable s) Staggered/ Hybrids - Fiber Optics/ Options/ GEN-X /RF/Power Accessories VME x/ VITA 0, HDB HSB Hybrids - Signal/Power/ Docking Conn./ Coax/Fiber Optics Accessories/Install. Low Mating Force MIL-DTL-0 Tape wire bundle in area of cable clamp, and build up diameter to approx. / inches, if required. Align self-locking tines of the strain relief housing with the cavities adjacent to each module. Push the strain relief housing into place until the self-locking tines snap and lock strain relief into position. Assemble opposite half of strain relief housing to connector and tighten tie-strap to provide clamping force on the wire bundle. Amphenol for more information at

LMS In-Line Splice Connector SIMPLE, LOW COST INTERCONNECTION DEVICE LRM (Line Replaceable s) Staggered/ GEN-X Hybrids - Fiber Optics/ /RF/Power Options/ Accessories VMEx / VITA 0, LMS Modular

The LMS is a simple, compact, three-piece assembly which is used in the following applications: Instrument terminations Equipment terminations Wire harness terminations Test points The LMS

It is manufactured of black thermoplastic material* and is temperature rated at C to +0 C ( F to + F).

12 LMS In-Line Splice Connector SIMPLE, LOW COST INTERCONNECTION DEVICE LRM (Line Replaceable s) Staggered/ GEN-X Hybrids - Fiber Optics/ /RF/Power Options/ Accessories VMEx / VITA 0, LMS Modular Connectors Amphenol s LMS in-line splice connector incorporates LMD modules and contacts. The LMS is a simple, compact, three-piece assembly which is used in the following applications: Instrument terminations Equipment terminations Wire harness terminations Test points The LMS double-ended tool-less splice (part number LMS-0T-TL) incorporated an integral release mechanism for easy tool-less module removal. It is manufactured of black thermoplastic material* and is temperature rated at C to +0 C ( F to + F). The LMS connector uses the same standard modules, bussing modules, diode modules and/or relay modules as the LMD assemblies (see pages 0-0 for module and contact availability. * For availability of materials other than standard black thermoplastic, consult Amphenol. Groove for Tie Strap or -Piece Bracket Push Button Release LMS Double-Ended In-Line Splice Housing : LMS-0T-TL PYLE- NATIONAL LMS SERIES. (.) Uses Same Types as LMD HSB HDB LMS Two-Piece Bracket for Panel Mounting. (.). (.). (.) KEY Low Mating Force MIL-DTL-0 Hybrids - Signal/Power/ Coax/Fiber Optics Docking Conn./ Accessories/Install. Two-Piece Bracket assembled together LMS Panel Mounting Bracket : LMS-B-0. DIA. HOLE (. DIA. HOLE). (.) Two-Piece Bracket apart.0 (.).0 (.) PYLE NATIONAL 0 Amphenol for more information at

Amphenol High Density HDB 3 /HSB 3 Connectors

Amphenol High Density HDB 3 /HSB 3 Connectors Amphenol HDB 3 /HSB 3 Connectors TABLE OF CONTENTS Amphenol HDB 3 and HSB Connectors 3 Table of Contents..............................45 Introduction - Features, Options, Performance...............................