SJT Series. Amphenol. Aerospace. Amphenol

Size: px

Start display at page:

Download "SJT Series. Amphenol. Aerospace. Amphenol"

Osborn Atkins
6 years ago
Views:

Series TABLE OF CONTENTS Connectors - Scoop-Proof Design of LJT Series & Standard Mounting Dimensions of JT Series - Meet European Specification Applications Table of Contents.

1 Series TABLE OF CONTENTS Connectors - Scoop-Proof Design of LJT Series & Standard Mounting Dimensions of JT Series - Meet European Specification Applications Table of Contents. 81 Features, Specifications. 82 How to Order, Alternate Rotations. 83 Insert Availability and Identification. 84 Styles: Crimp Wall Mounting Receptacle 00RT, Crimp Wall Mounting Receptacle for Back Panel Mounting P00RT. 85 Crimp Box Mounting Receptacle for Back Panel Mounting P02RE, Crimp Jam Nut Receptacle 07RT. 86 Crimp Straight Plug 06RT, Crimp Straight Plug with Grounding Fingers G06RT. 87 Hermetic Solder Mounting Receptacle IY, Hermetic Jam Nut Receptacle 07Y. 88 Accessories,, and Tools see pages Typical Markets: Military & Commercial Aviation (older designs) Applications Complaint with European Specifications: PAN6433-2, LN29729, VG96912 Military Vehicles for more information at

2 Options High Speed EMI Filter Printed III Transient Circuit Board Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 I II III Test Current Standard Hermetic Maximum Millivolt Drop Crimp* CONTACT RATING Maximum Millivolt Drop Hermetic 22M D Power 33 NA 33 NA * When using silver plated wire Rating Suggested Operating Voltage (Sea Level) AC (RMS) DC Features, Specifications connectors combine unique design fea tures of the scoop-proof LJT series within standard mount ing dimensions of JT types. Available in a wide range of shell sizes, finishes, insert arrangements and accessories, the features: 100% scoop-proof design basic MIL-DTL Series I* lengths Standard mounting dimensions MIL-DTL-38999, Series III** dimensions Compliance with European Specifications PAN6433-2, LN29729, VG96912 Components Standard connectors use aluminum shells. Standard plating on shell components is cadmium over nickel with many optional finishes available. A dependable 5-key/keyway shell polarization with bayonet-lock coupling is incorporated to aid and assure positive mating. The insert material is a high-temperature, rigid dielectric polymer providing excellent electrical characteristics. A fluorinated silicone interfacial seal is featured on the mating face of the pin inserts, assuring complete electrical isolation of the pins when connector halves are mated. Contrasting letter or number designations are used on the insert faces. A main joint gasket is installed in the receptacles for moisture sealing between connector halves. Serrated and threaded shells, with a moisture sealing pilot for back shells, accept a wide range of accessories. Hermetic seal receptacles are available in carbon steel or stainless steel shells. Rear insertable/rear release crimp contacts are standard in connectors. Power contacts are available in sizes 10, 12, 16, 20, 22M and 22D. All socket contacts are probe proof. Standard contact plating is 50 mµ minimum gold. Coaxial contacts are available in sizes 8, 12 and 16 to accommodate a wide range of coaxial cables; see Coaxial contact information in the High Speed section of this catalog. 8 and 12 Twinax contacts are also available; see Concentric Twinax contact information in the High Speed section of this catalog. Optional Features Special adaptations of the are available for hermetic and high temperature applications. The S high temperature con nector is rated at 392 F. hermetic receptacles are described on page 88. Specials Special types are available, such as connectors less contacts and circular rack and panel connectors with solderless wrap contacts. A complete listing of connector types, shell styles and service classes appears on page 83, How to Order. For further informa tion on special application requirements, contact an Sales Person or visit to find a sales person in your area. *MIL-DTL Series I supersedes MIL-C Series I. **MIL-DTL Series III supersedes MIL-C Series III. SERVICE RATING** Test Voltage (Sea Level) Test Voltage 50,000 Ft. Well Diameter Test Voltage 70,000 Ft. Crimp Well Data Min. Well Depth 22M.028 ± D.0345 ± ± ± ± ± (Power).137 ± Test Voltage 110,000 Ft. M VRMS 550 VRMS 350 VRMS 200 VRMS N VRMS 400 VRMS 260 VRMS 200 VRMS I VRMS 600 VRMS 400 VRMS 200 VRMS II VRMS 800 VRMS 500 VRMS 200 VRMS ** Please note that the establishment of electrical safety factors is left entirely in the designer s hands, since he is in the best possible position to know what peak voltage, switching surges, transients, etc., can be expected in a particular circuit. 82 for more information at

3 How to Order, Alternate Rotations Easy Steps to build a part number Connector Style Class - Alternate Keying Insert Arrangement. Position 00 RT P A (XXX) Finish Variations Suffix III II I S G P Step 1. Select a Connector Designates Standard scoop-proof Junior Tri-Lock Connector High Temperature Connector Plug with Grounding Fingers Back Panel Mounted Step 2. Select a Style Designates 00 Wall Mount Receptacle 06 Straight Plug 07 Jam Nut Receptacle I Solder Mount Receptacle Hermetic Step 3. Select a Class Y Designates For hermetic applications... Fused compression glass sealed inserts. Leakage rate less than 1.0 x 10-6 cc/sec. at 15 psi differential; with interfacial seal. For environmental applications supplied without rear accesso ries. Design provides serrations on rear RT threads of shells with mois ture sealing pilot for back shells. For additional information defining complete description of service class, consult, Sidney, NY. Step 4. Select a & Insert Arrangement from chart on pg. 84. To view Insert Arrangement illustrations see pgs & Insert Arrangements are together in one chart. First number represents, second number is the Insert Arrangement. Only selected illustrations are available for on pages Please refer to chart on page 84 for select Insert Arrangements. Step 5. Select a P S Designates Pin Socket Step 6. Select an Alternate Keying Position A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The AB angle for a given connector is the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/keyway. AB angles shown are viewed from the front face of the connector. A recep tacle is shown below. The angles for the plug are exactly the same, except the direction of rotation is opposite of that shown for the receptacle. Key/Keyway Rotation AB ANGLE OF ROTATION (Degrees) Normal A B C D FINISH DATA Aluminum Components Non-Hermetic Finish Bright Cadmium Plated Nickel Base Suffix Anodic Coating (Alumilite) (005) Chromate Treated (Iridite 14-2) (011) Olive Drab Cadmium Plate Nickel Base (014) Electroless Nickel Coating (023) Carbon Steel, Tin Plated and Stainless Steel, Gold Plated Hermetic Connectors RELATIVE POSSIBLE POSITION OF ROTATED MASTER KEYWAY (front face of receptacle shown) Step 7. Select a Finish Variation Suffix Consult Indicated Finish Standard for s /G ( )Y III 5015 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit Board EMI Filter Transient High Speed Options for more information at

4 Insert Availability and Identification Options High Speed EMI Filter Printed III Transient Circuit Board Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 I II III Crimp Hermetics* Class Y Rating Total 22D 22M (Coax) 8-6 X M X M X M X I X I I X I X M X M X I X I X I X M X M X X I X II X I X I X X I X X M X X M X I (Power) 8 (Coax) 8 (Twinax) 16-2 M ** 16-6 X I X II I X I X M X M X M X X I X II X I X X M X X M X X M X M X I X II X X M X I X I M II X X M X M X II X X M X I X M X M X I X M ** N X I N *** X I X I X M X I I I X I Not tooled for 02-RE * Pin inserts only (contact for socket availability). ** twinax contacts for MIL-C-17/ cable. *** Two size 16 contacts dedicated to fiber optics. Consult or Fiber Optic Section for more information. Must be ordered separately Coax for RG180 or RG195 cable. 8 Coax and Twinax are interchangeable. For availability of size 12 twinax contacts, consult, Sidney, NY 84 for more information at

New, Featured Products has become the leader in interconnection products through its long history of engineering expertise for product solution solving.

They are always striving to meet new customer requirements in ever changing markets.

New/Featured Matrix MIL-DTL-5015 with RADSOK Page 193 A special design of the Matrix MIL-DTL-5015, Series II connectors has added high amperage with the RADSOK contacts in the plug instead of

Solution: Higher amperage capability in Matrix MIL-DTL-5015 New/Featured ARINC 801 Connectors Page 356 Designed for use in ARINC 801 fiber optic connectors - manufactured to comply with ARINC 801.

New/Featured New HD38999 (High Density, Crimp) Plugs and receptacles Page 43, 44 The HD38999 family of connectors was designed to work with existing Mil-specified 38999 shells.

5 New, Featured Products has become the leader in interconnection products through its long history of engineering expertise for product solution solving. New and innovative solutions are under development every day within our highly skilled engineering departments who are teamed with marketing product managers and production specialists. They are always striving to meet new customer requirements in ever changing markets. The teams have a customer-driven approach to produce the end result: quality interconnect products that meet or exceed customer demands. New/Featured Breakaway Hybrid, Low Profile Lanyard Release Plug Page 42 New Hybrid Lanyard Breakaway Fail Safe Connector with a composite thermoplastic outer operating sleeve for greater durability. Solution: Navy F-18 program needed a break away plug that would have greater durability in weapons release application. New/Featured Matrix MIL-DTL-5015 with RADSOK Page 193 A special design of the Matrix MIL-DTL-5015, Series II connectors has added high amperage with the RADSOK contacts in the plug instead of standard rear release crimp contacts. Solution: Higher amperage capability in Matrix MIL-DTL-5015 New/Featured ARINC 801 Connectors Page 356 Designed for use in ARINC 801 fiber optic connectors - manufactured to comply with ARINC 801. Genderless terminus allows for use on both sides of a connector. New/Featured New HD38999 (High Density, Crimp) Plugs and receptacles Page 43, 44 The HD38999 family of connectors was designed to work with existing Mil-specified shells. The HD38999 has 30% more contacts, it still performs to minimum electrical requirements of standard connectors. Solution: 30% more contact density in Series III s New/Featured Filter Connector with High Density Patterns Page 289 New High Density Patterns are available in Filter connectors in standard Mil-Spec or filter length shells. They provide 30% more contact that standard insert arrangement patterns. See page 43 for ordering information. Solution: Higher contact density and custom stand-off shell designs New/Featured MT Ferrule Connectors Page 359 offers a multi-channel circular connector with high density MT fiber optics. High fiber density in a relatively small circular connector package with all the advantages of the MIL- DTL series III connector III II I III 5015 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit Board EMI Filter Transient High Speed Options Solution: Fiber Optic Termini & Connector that meet ARINC specifications Solution: Higher Density in MIL-DTL for more information at

6 Insert Availability and Identification Options High Speed EMI Filter Printed III Transient Circuit Board Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 I II III Crimp Hermetics* Class Y Rating Total 22D 22M (Coax) 8-6 X M X M X M X I X I I X I X M X M X I X I X I X M X M X X I X II X I X I X X I X X M X X M X I (Power) 8 (Coax) 8 (Twinax) 16-2 M ** 16-6 X I X II I X I X M X M X M X X I X II X I X X M X X M X X M X M X I X II X X M X I X I M II X X M X M X II X X M X I X M X M X I X M ** N X I N *** X I X I X M X I I I X I Not tooled for 02-RE * Pin inserts only (contact for socket availability). ** twinax contacts for MIL-C-17/ cable. *** Two size 16 contacts dedicated to fiber optics. Consult or Fiber Optic Section for more information. Must be ordered separately Coax for RG180 or RG195 cable. 8 Coax and Twinax are interchangeable. For availability of size 12 twinax contacts, consult, Sidney, NY 84 for more information at

00RT Crimp Wall Mounting Receptacle L Max M +.000 R (TP) S ±.016 T ±.005 V Thread Modified Class 2A UNEF (Plated) Modified Major Dia.

4375-28.421.417.473.117 10.500.632.719.938.120.5625-24.542.538.590.117 12.500.632.812 1.031.120.6875-24.667.663.750.117 14.500.632.906 1.125.120.8125-20.791.787.875.117 16.500.632.969 1.219.120.9375-20.

550.602 1.375 1.688.147 1.4375-18 1.408 1.404 1.500.

7 00RT Crimp Wall Mounting Receptacle L Max M R (TP) S ±.016 T ±.005 V Thread Modified Class 2A UNEF (Plated) Modified Major Dia. Note: Standard wall mount may be back panel mounted where panel thickness does not exceed these dimensions. For thicker panel applications, P00RT should be used. N P** Max P00RT Crimp Wall Mounting Receptacle (Back Panel Mounting) PART # Connector 00 RT X-X X X (XXX) PART # Connector Style *To complete, see how to order pages Class & Insert Arrg Alternate Positions 00RT To complete, see how to order pages Style Class & Insert Arrg Alternate Positions Special Variations Special Variations P 00 RT X-X X X (XXX) P00RT III II I III 5015 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit Board EMI Filter Transient F K L M R (TP) S T ±.005 Z ±.031 V Thread Class 2A (Plated) UNEF P Dia W G All dimensions for reference only. for more information at High Speed Options 85

P02RE Crimp Box Mounting Receptacle (Back Panel Mounting) Options High Speed EMI Filter Printed 5015 83723 III 26482 38999 Transient Circuit Board 26500 Pyle Crimp Rear Release Matrix Matrix Pyle

8 P02RE Crimp Box Mounting Receptacle (Back Panel Mounting) Options High Speed EMI Filter Printed III Transient Circuit Board Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 I II III PART # Connector Style F To complete, see how to order pages Class K & Insert Arrg M R (TP) Alternate Positions Special Variations P 02 RE X-X X X (XXX) P02RE S T ±.005 Z ±.031 P Dia KK Dia PART # Connector D shaped panel cut-out dimensions ** Oversize threads. Check accessory threads before ordering Style To complete, see how to order pages A Class & Insert Arrg H Hex S ±.016 Alternate Positions Special Variations 07 RT X-X X X (XXX) V Thread Class 2A UNEF (Plated) R Thread Class 2A UNEF (Plated) N C G T All dimensions for reference only. 07RT Crimp Jam Nut Receptacle 07RT 86 for more information at

06RT/G06RT Crimp Straight Plug/Straight Plug (with Grounding Fingers) PART # Connector Style To complete, see how to order pages 83-84.

Printed Circuit Board L Max Q Dia. G06RT Class 2A UNEF (Plated) V Thread Modified Major Dia. 8 1.219.734.4375-28.421.417 10 1.219.844.5625-24.542.538 12 1.219 1.016.6875-24.667.663 14 1.219 1.141.

9 06RT/G06RT Crimp Straight Plug/Straight Plug (with Grounding Fingers) PART # Connector Style To complete, see how to order pages Class & Insert Arrg Alternate Positions Special Variations 06 RT X-X X X (XXX) G 06 RT X-X X X (XXX) III II I 06RT III 5015 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit Board L Max Q Dia. G06RT Class 2A UNEF (Plated) V Thread Modified Major Dia All dimensions for reference only. EMI Filter Transient High Speed Options for more information at

IY Hermetic Solder Mounting Receptacle Options High Speed EMI Filter Printed 5015 83723 III 26482 38999 Transient Circuit Board 26500 Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 I II III PART

10 IY Hermetic Solder Mounting Receptacle Options High Speed EMI Filter Printed III Transient Circuit Board Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 I II III PART # Connector Style Class L & Insert Arrg M Alternate Positions G Dia Special Variations I Y X-X X X (XXX) K Dia N PART # Connector To complete, see how to order pages Y X-X X X (XXX) D shaped panel cut-out dimensions Style To complete, see how to order pages N Class & Insert Arrg C A Alternate Positions Special Variations L H Hex S ±.016 KK RR Thread Class 2A UNEF (Plated) T All dimensions for reference only. IY 07Y Hermetic Jam Nut Receptacle 07Y 88 for more information at

MIL-DTL-38999 Series III, II, I, and Accessories,, and Tools Series III TV Series II JT Series I LJT is the leader in Interconnect solutions and provides companies with a product portfolio of

With connectors conforming to Military, and Industrial standards in US, Europe and Asia, assumes the leadership in meeting the interconnect needs of these market segments.

11 MIL-DTL Series III, II, I, and Accessories,, and Tools Series III TV Series II JT Series I LJT is the leader in Interconnect solutions and provides companies with a product portfolio of connectors, accessories, cable assemblies and system integration for most applications across various industries. With connectors conforming to Military, and Industrial standards in US, Europe and Asia, assumes the leadership in meeting the interconnect needs of these market segments III II I III 5015 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle MIL-DTL Series III TV Tri-Start Backshells Accessories Dummy Wire Combs Receptacle Protection Cap Plug Protection Cap Dummy Receptacle Cable Clamps -Printed Circuit Board Wire Wrap Header Assembly Application Tools Crimp Tools Insertion Tools Removal Tools MIL-DTL Series II JT Receptacle Protection Cap Plug Protection Cap Strain Relief (Solder/Crimp ) -Printed Circuit Board Wire Wrap Header Assembly Application Tools Crimp Tools Insertion Tools Removal Tools Receptacle Protection Cap Plug Protection Cap Dummy Receptacle Cable Clamps Application Tools MIL-DTL Series I LJT Receptacle Protection Cap Plug Protection Cap Dummy Receptacle Cable Clamps -Printed Circuit Board Wire Wrap Header Assembly Application Tools Crimp Tools Insertion Tools Removal Tools Printed Circuit Board EMI Filter Transient High Speed Options Crimp Tools Insertion Tools Removal Tools for more information at

Accessories Plug Protection Cap/Receptacle Protection Cap PLUG PROTECTION CAP *10-476801-XXX RECEPTACLE PROTECTION CAP *10-325943-XXX 38999 III II I 26482 83723 III 5015 Matrix 2 Matrix Pyle Crimp

N Dia. +.001 8.688.473 10.812.590 12.969.750 14 1.094.875 16 1.219 1.000 18 1.344 1.125 20 1.469 1.250 22 1.594 1.375 24 1.719 1.

12 Accessories Plug Protection Cap/Receptacle Protection Cap PLUG PROTECTION CAP * XXX RECEPTACLE PROTECTION CAP * XXX III II I III 5015 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle * XXX *To complete order number, add shell size and suffix number. For example, shell size 10 with bright cadmium plated nickel base, Plug D Dia. N Dia All dimensions for reference only Finish Bright Cadmium Plated Nickel Base Anodic Coating (Alumilite) Chromate Treated (Iridite 14-2) Olive Drab Cadmium Plate Nickel Base Electroless Nickel Coating *To complete order number, add shell size and suffix number. For example, shell size 10 with bright cadmium plated nickel base, Receptacle DD Dia. L Suffix XX7 XX5 XX0 XX9 XXG Printed Circuit Board EMI Filter Transient High Speed Options for more information at

Dummy Receptacle, Cable Clamp Options High Speed EMI Filter Printed 5015 83723 III 26482 38999 Transient Circuit Board 26500 Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 I II III DUMMY

13 Dummy Receptacle, Cable Clamp Options High Speed EMI Filter Printed III Transient Circuit Board Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 I II III DUMMY RECEPTACLE * XXX CABLE CLAMP * XXX Finish Bright Cadmium Plated Nickel Base Anodic Coating (Alumilite) Chromate Treated (Iridite 14-2) Olive Drab Cadmium Plate Nickel Base Electroless Nickel Coating Suffix XX7 XX5 XX0 XX9 XXG * To complete order number, add shell size and suffix number. For example, shell size 10 with bright cadmium plated nickel base, Dummy Receptacle D Dia. L All dimensions for reference only Finish Bright Cadmium Plated Nickel Base Anodic Coating (Alumilite) Chromate Treated (Iridite 14-2) Olive Drab Cadmium Plate Nickel Base Electroless Nickel Coating Suffix XX7 XX5 XX0 XX9 XXG * To complete order number, add shell size and suffix number. For example, shell size 10 with bright cadmium plated nickel base, Cable Clamp A Dia B Dia L Y Thread Class 2B UNEF (Plated) GG All dimensions for reference only 104 for more information at

14 , Sealing Plugs, Plastic Protection Caps Pins CONTACTS & SEALING PLUGS Sockets Sealing Plugs 8 (Coax) ** ** (Twinax) (Power) Not Available H Yellow Blue Red 22* Black 22M* Black 22D Black Above part numbers include standard finish designation gold plating over suitable underplate in accordance with SAE AS For other finish variations, consult, Sidney, NY. * Inactive for new design. ** and are for use with RG180B/U and RG195A/U cable. For other size 8 coax or optional sizes 12 and 16 coax contacts available for use in connectors, see catalog or consult, Sidney, NY and are for use with M17/ cable. Optional design see slash sheet MS For other contact options available for use in connectors, (wire-wrap, thermocouple, fiber optic) consult, Sidney, NY. PLASTIC PROTECTION CAPS Plug Receptacle S III II I III 5015 Matrix 2 Matrix Pyle Crimp Rear Release Matrix Pyle Printed Circuit Board EMI Filter Transient High Speed Options for more information at

15 MIL-DTL-38999, Series I LJT, II JT, III TV, & Application Tools Options High Speed EMI Filter Printed III Transient Circuit Board Pyle Crimp Rear Release Matrix Matrix Pyle Matrix 2 I II III Series III TV Series II JT Series I LJT The following data includes information pertaining to the application tools which have been established for crimping, inserting, and removing contacts incorporated in the TV, CTV and MIL- DTL Series III connectors. For additional information on coax, twinax and triax contact tools see High Speed section of this catalog. All crimping tools included are the full cycling type and when Where 2 or 3 tools are listed for a contact size, only one tool and its die or positioner are required to crimp the contact. The above crimping tools and positioners are available from the approved tool manufacturer. CRIMPING TOOLS / Crimping Tool Turret Die or Positioner 12 Pin and Socket M22520/1-01 M22520/ Pin and Socket M22520/1-01 M22520/ Pin and Socket M22520/1-01 M22520/2-01 M22520/ , 22D, 22M Pin M22520/2-01 M22520/ , 22D, 22M Socket Series I, III 22D Socket Series II 8 Twinax Center Pin and Socket 8 Twinax Intermediate Outer Pin & Socket M22520/2-01 M22520/7-01 M22520/2-01 M22520/7-01 M22520/2-01 M22520/5-01 M22520/1-04 M22520/7-04 M22520/1-04 M22520/2-10 M22520/7-08 M22520/2-09 M22520/7-07 M22520/2-07 M22520/7-05 M22520/2-06 M22520/7-06 M22520/2-37 M22520/5-200 used as specified in the installation instructions (L-624 and L-844) covering the TV, CTV and MS series connectors, will pro vide reliable crimped wire to contact terminations. There is a possibility of additional crimping tools other than those included being available at present or in the future for this specific appli cation. / 8 Coaxial Inner Pin and Socket 8 Coaxial Outer Pin and Socket Crimping Tool M22520/2-01 M22520/5-01 M22520/5-01 M22520/ Coaxial Inner M22520/2-01 Pin and Socket 16 Coaxial Outer M22520/4-01 Pin and Socket 12 Coaxial Inner M22520/2-01 Pin and Socket 12 Coaxial Outer M22520/31-01 Pin and Socket 10 (Power) TP Turret Die or Positioner M22520/2-31 M22520/5-05 Die Closure B M22520/5-41 Die Closure B M22520/10-07 Die Closure B M22520/2-35 M22520/4-02 M22520/2-34 M22520/31-02 INSERTION TOOLS Plastic Tools Metal Tools Use with Angle Straight MS Part Number Color MS Part No. Commercial Part No. Commercial Part No. Color 10 (Power M81969/14-05* Gray / (White) M81969/8-11 Green 12 M81969/14-04* Yellow / (White) M81969/ Yellow 16 M81969/14-03* Blue / (White) M81969/ Blue 20 M81969/14-10* Red / (Orange) M81969/ Red 22 M81969/14-09 Brown/White M81969/ Brown 22D, 22M M81969/14-01* Green / (White) M81969/ Black 8 Coaxial None Required 8 Twinax None M81969/46-06** None Red REMOVAL TOOLS Plastic Tools Metal Tools Use with Angle Straight MS Part For Unwired Commercial Commercial Number Color Commercial Part No. MS Part No. Part No. Part No. Color 10 (Power) M81969/14-05* (Gray) / White M81969/8-12 Green / White 12 M81969/14-04* (Yellow) / White M81969/ Yellow / White 16 M81969/14-03* (Blue) / White M81969/ Blue / White 20 M81969/14-10* (Orange) / Red M81969/ Red / Orange 22 M81969/14-09* (Brown)/White M81969/ Brown/White 22D, 22M M81969/14-01* (Green) / White M81969/ Green / White 8 Coaxial M81969/14-12 Green None None DRK264-8 N/A 8 Twinax M81969/14-12 Green None M81969/46-12** N/A N/A The M81969/8, , , and metal contact insertion and removal tools will accommodate wires having the maximum outside diameter as follows: size 12: dia. is.155, size 16: dia. is.109, size 20: dia. is.077, size 22D: dia. is.050. When wire diameters exceed those specified, the plastic tools must be used. * Double end insertion/removal tool. ** Twinax insertion tools are available only in a straight type, metal version. To be determined. Daniels Manufacturing Co. for availability. 108 for more information at

16 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: : X P

SJT Series. Amphenol. Aerospace. Amphenol

SJT Series. Amphenol. Aerospace. Amphenol JT eries TABE OF CONTENT JT s - coop-proof Design of JT eries & tandard Mounting Dimensions of JT eries - Meet European pecification Applications Table of Contents. 81 Features, pecifications. 82 How to