Lecture 1 Introduction and Basic Usage Simplorer v2014

Transcription

1 Lecture 1 Introduction and Basic Usage Simplorer v Release 2014 ANSYS, Inc. 1 Simplorer v2014

2 Agenda (Basics Class) 8:30 9:15 Lecture 1 Introduction and Basic Usage 9:15 9:45 Lecture 2 Specific Usage, State and Control Blocks Break 10:00 10:30 Workshop 1 Basic Usage 10:30 11:00 Workshop 2 State Diagrams 11:00 11:30 Workshop 3 Control Blocks 11:30 12:30 Lunch 12:30 1:00 Lecture 3 VHDL-AMS and Sub-Circuits 1:00 1:30 Workshop 4 VHDL-AMS 1:30 2:30 Workshop 5 Sub-Circuits Break 2:45 3:15 Lecture 4 Transfer Functions and Non-Linear Modeling 3:15 4:15 Workshop 6 AC Analysis and Transfer Functions 4:15 4:45 Workshop 7 Non-Linear Modeling using Data Import 2014 ANSYS, Inc. 2 Simplorer v2014

3 Welcome! Welcome to the ANSYS Simplorer application introductory training course! This training course covers the basics of using ANSYS Simplorer in performing electrical systems analyses. It is intended for all new or occasional ANSYS Simplorer users Course Objectives: General understanding of the user interface, creating new designs, adding components, displaying and defining parameters and outputs, setting up and running simulations, viewing results and post processing Utilizing different control techniques via State Diagrams and Control Blocks Understanding VHDL-AMS and Sub-Circuit Modeling AC analysis for Transfer Functions and Bode plots Non-linear components application using Import Data 2014 ANSYS, Inc. 3 Simplorer v2014

4 Introduction 2014 ANSYS, Inc. 4 Simplorer v2014

5 Simplorer 2014 ANSYS, Inc. 5 Simplorer v2014

6 Simulation Pyramid System Circuit / Subsystem Simplorer Component XPrt Tools FEA Field Solvers ANSYS: Multiphysics Solvers Electromagnetic Thermal Fluidic Mechanical 2014 ANSYS, Inc. 6 Simplorer v2014

7 Modeling Technologies System Block Diagrams/State Machines Sub-System VHDL-AMS / C Circuits Circuit FEA Component Logic Electrical 2014 ANSYS, Inc. Magnetic Mechanical 7 Thermal Hydraulic Simplorer v2014

8 D2D GAIN J ANSYS Electromechanical System Solution HF/SI HFSS, Q3D, SIWave RLCG Parasitics ANSYS Simplorer System Design SCADE Suite Control Systems IA PMSYNC Torque A IB ICA: A A IC PP := 6 A ANSYS CFD Thermal Optimetrics LS-DSO PExprt Magnetics RMxprt Machine Design ANSYS Mechanical Thermal/Stress ANSYS Maxwell 2D/3D FEA Analysis Embedded Design Model order Reduction Co-simulation Field Solution FE Model Generation 2014 ANSYS, Inc. 8 Push Back Simplorer Excitations v2014

9 Example Power Systems Electrical Electromagnetics Electromechanical Power Source: Generator, Fuel Cell, Solar, Battery Power Distribution Converter/ Inverter Loads: Motors, Electrical Control Analog Digital Control Thermal Analog Control Electronics Digital Power systems consist of a variety of components, interactions and modeling needs. Simplorer can accommodate all these modeling domains into one simulation 2014 ANSYS, Inc. 9 Simplorer v2014

10 Simplorer s Integrated Environment Equation Modeling Block EQUBL INREG VBUS>=VSET vbus + V I_main D1 VBUS<VSET VM1 EQU EQU a:= (t^(1.0/x)*rating)/(726.3^(1.0/x)) x:= rating:= 10 OUTREG vset GAIN2 sp GAIN engine2generator VSET GAIN3 CONST GAIN XY1 XY NL1 NL GAIN1 GAIN vbus := VM1.V I1 DATAPAIRS1 t Y Magnetics VBUS CONST GAIN4 ERR INTG1 SUM1 LIMIT1 GAIN I LIMIT Circuit, Block, State Θ RTH1 therm RTH2 T1 R2 CTH1 G(s) VHDL-AMS GS1 (S1.AC_Sim)? 1k: (S1.DC_Sim)? 1k: rload2_ct FEA rload21 C code TR Probe TR_Probe1 pin 1k 10*node.V*t*f*L.I # i=f(v) Co-Sim (ie Simulink) Spice Import 2014 ANSYS, Inc. 10 Simplorer v2014

11 Basic Usage Flow (Demo As Well) Note this section shows the basic flow only. There are many options and capabilities With each step that are not shown here 2014 ANSYS, Inc. 11 Simplorer v2014

12 User Interface Note the Component Manager Can be set up as Menu selection Schematic Capture Window Component Manager Menu bar Tool Icon bar Project Manager window and project tree Properties window Status windows Message Manager window Progress window 2014 ANSYS, Inc. 12 Simplorer v2014

13 Initial Window Use RMB (Right mouse button) -> Rename over the Project name title Project1, then on Design name title Simplorer1 to rename them. Note the * will appear meaning something has changed and user needs to save ANSYS, Inc. 13 Simplorer v2014

14 Adding Components Insert components via the Component Manager window Expand folders to select the desired part, drag it into the schematic window (note insert mode). Once on schematic, double click on the part to bring up the properties window ANSYS, Inc. 14 Simplorer v2014

15 Adding Components Cont d A second type of property window is also available. This is selected by placing the mouse over the part, then RMB -> properties. Note this is the same one that is found in the Properties window in the UI Note to display more tab options, use menu tools/options/schematic editor options and select Show advanced property data Note the info button under the Parameter Values tab for Help on the part or can RMB over component to bring up menu for Component Help 2014 ANSYS, Inc. 15 Simplorer v2014

16 Adding Components Cont d The user can add components to the Favorites section in the Component Manager window to be readily available in the future. This is done by selecting the component in the Component Manager, then RMB -> add to favorites ANSYS, Inc. 16 Simplorer v2014

17 Define Outputs Once the schematic is finished, the user can define the desired outputs (waveforms) to save to the database file and view after simulation. Select from the menu (SimplorerCircuit -> Output Dialog) to bring up the dialog window which allows the user to choose desired signals. Note the filter boxes, Collapse All, etc 2014 ANSYS, Inc. 17 Simplorer v2014

18 Ground Node Several ways to add a ground node: Toolbar Draw Menu Ctrl-g 2014 ANSYS, Inc. 18 Simplorer v2014

19 Simplorer GUI Schematic Window Schematic window enables users to view and interact with the circuit/system dynamically. The view in the Schematic window can be manipulated either using RMB -> menu or Mouse-keyboard keys Top level Menu Icons are also available for these functions Additional Mouse Commands for View Manipulation Dynamic Zoom: hold down the SHIFT+ALT keys, hold down Left Mouse button, and move mouse to zoom in/out Dynamic Pan: hold down the SHIFT key only, hold down Left Mouse button, and move mouse to pan in any direction 2014 ANSYS, Inc. 19 Simplorer v2014

20 Set Up Simulation Add Simulation set up by placing mouse over Analysis In the Project Manager window and using the RMB To bring up the selections 2014 ANSYS, Inc. 20 Simplorer v2014

21 Simulate the Design To simulate the design, use the RMB over Analysis in the project manager window, then select Analyze. Or select desired Simulation at the top pull down menu, and select blue icon Note the lower windows will show the status of the simulation 2014 ANSYS, Inc. 21 Simplorer v2014

22 View Results (Reports) To view the results, use the RMB over Results in the project manager window to create several types of plots. Select the desired signals and select new report. This will display the waveform 2014 ANSYS, Inc. 22 Simplorer v2014

23 View Plots on Schematic Plots can also be placed on the schematic with menu (Draw -> Report -> type) and placing it in the schematic. Double click on the plot to bring up the selection of signals Note because signals are based on which analysis is performed, Analysis setup must be defined in order to enable selection of signals 2014 ANSYS, Inc. 23 Simplorer v2014

24 Adjusting Plot View The way plots are displayed can be change depending on preference. Note here we show the display of the Header title instead of Legend 2014 ANSYS, Inc. 24 Simplorer v2014

25 Adjusting Plot View Cont d Note the Plot View can be Edited in the Project Manager window or on the schematic by selecting it, RMB -> Edit in place. For example to change the x-axis, select the axis, then in the Properties window in the lower left, can specify range under the Scaling tab 2014 ANSYS, Inc. 25 Simplorer v2014

26 Viewing Results (walking waveforms) Can set up the viewing of results in the plots several ways 1) show results only after simulation is done - speeds up simulation (Tools-> Options -> SimplorerOptions) unselect Update reports during simulation 2) update the plots during the simulation to view whats happening (Simplorer Circuit -> Results -> update all reports) 3) have the waveforms displayed as the simulation runs -may slow down simulation (Tools -> Options -> Simplorer Options) select Update reports during simulation 2014 ANSYS, Inc. 26 Simplorer v2014

27 Project Notes Notes on installed examples for the different library components RMB (over part) -> Load Example (this will load the example as a new project) Should save as this project to a local directory and different name Care should be taken when removing projects if chose delete it will remove the project from the hard drive. If simply want to remove a project from the project manager, use close instead so it wont be deleted from the hard drive completely 2014 ANSYS, Inc. 27 Simplorer v2014