with extraction and return pipe

Transcription

1 Float switch with extraction and return pipe 351 TEG + Intake and extraction pipes and reliable measurement + Long lifetime due to contact-free reed technology + No calibration necessary + Switching points with 10 mm to 35 mm spacing + Not influenced by temperature fluctuation + Wide variety of connector types + Integrated tank air vent + Filter for suction pipe + Simple installation Use This float switch is equipped with extraction and return pipes and is perfectly suited for use in fuel and water tanks. The float switch 351 TEG is mounted simply to the tank with the coupling ring. The aeration and de-aeration of the vehicle tank can also be performed by the float switch. Variants Generally, the 351 TEG can be adapted to individual customer needs. Individual switching points can be defined in steps of 10mm. Optionally, the suction pipe can be equipped with a filter. The length can be selected freely up to 1000 mm in accordance with the tank geometry. 351 TEG Version 1.6 Page 1 of 6

2 Mechanical assembly Coupling ring Ø 76 Level head Air vent closed / open Head, PA12 Hose connection Ø 6.5 mm Hose connection Ø 12.5 mm O-ring Viton Hose connection Ø 9.5 mm Level head VA pipe Aluminum pipe Overall length. (max mm) Hose connection Ø 6.5 mm Hose connection Ø 8 mm Level head Hose DIN 73379/A NBR Filter element VA / POM on request SAE 3/8" Connection Installation dimensions Installation length pipe length max mm Mounting coupling ring buttress thread S80 4 DIN 513 Head diameter 74.5 mm Assembly height approx. 35 mm from sealing surface Installation hanging 351 TEG Version 1.6 Page 2 of 6

3 Connector types Angled connectors AMP Superseal, pin AMP Superseal, pin AMP Seal, 16 2-pin AMP Seal, 16 3-pin Metri-Pack 150.2, 2-pin Angled connectors Straight connectors DT04, 2-pin Cable outlet M12 connector Straight connectors Wire/shaft pipe outlet AMP Superseal, 2-pin AMP Superseal, 3-pin DT04, 2-pin DT04, 3-pin Switching points R max top, R max bottom 10mm spacing 20mm spacing 25mm spacing 49±3 mm 49±3 mm 47±3 mm 47±3 mm 25±3 mm 25±3 mm 46±3 mm 36±3 mm 48±3 mm 37±3 mm 30mm spacing 35mm spacing 54±3 mm 54±3 mm 43±3 mm 36±3 mm 45±3 mm 40±3 mm 351 TEG Version 1.6 Page 3 of 6

4 Key electrical data Circuit diagram Power loss do not exceed PV max. of resistances Operating voltage < 48 V Switching points 10, 20, 25, 30, 35mm spacings Resistor type P W ±1% Total resistance selectable Basic resistance selectable Key mechanical data Protection class IP67 DIN EN Material see page 2 Working temperature -30 to +85 C 351 TEG Version 1.6 Page 4 of 6

5 Fax: +49 (0) Specifications of your float switch Head Hose connection Ø 12.5 mm / Ø 9.5 mm Hose connection Ø 8 Connection SAE 3/8" Coupling ring With Without Air vent Open Closed Overall length (max mm) Level full R Max R Min Level empty R Max Resistor type Resistor type Spacing 10mm spacing 20mm spacing 25mm spacing 30mm spacing 35mm spacing Hose With length Without R Min 3±2 Filter 100 μm 315 μm Without Connector types Angled connectors AMP Superseal 1.5, 2-pin AMP Superseal 1.5, 3-pin AMP Seal 16, 2-pin AMP Seal 16, 3-pin DT04, 2-pin Metri-Pack 150.2, 2-pin Straight connectors Cable outlet Wire/shaft pipe outlet AMP Superseal, 2-pin AMP Superseal, 3-pin DT04, 2-pin DT04, 3-pin M12 connector Please specifiy pin assignment (3 pin connectors) More connectors on request. 351 TEG Version 1.6 Page 5 of 6

6 Fax: +49 (0) Your product enquiry Quantity Batch size Name / first name Company Address Postal code / town Country Notes, questions, other 351 TEG Version 1.6 Page 6 of 6