LZ Series Multi-Pin Connectors
|
|
- Augustine Montgomery
- 5 years ago
- Views:
Transcription
1 Commercial/Industrial LZ Series Multi-Pin Connectors Environmentally Sealed Power and Control Connectors
2 Commercial/Industrial Table of Contents Introduction... Practical Applications... Component Overview... Catalog umber Definition... Ordering Guide...0 Technical Specifications...0 Insert Configurations... Dimensions... Request for Quote...
3 Introducing... LZ Series Multi-Pin Connectors Environmentally sealed power and control connectors for harsh industrial applications Features & Benefits: n Black nickel plating standard for superior durability and shell conductivity n IP rating suitable for wet locations n Reversible inserts for maximum flexibility suitable for use in all cable-mount, panel-mount and conduit-mount applications n Wire terminals are easily accessible for quick assembly n n n n Cable housings provide ample room for wiring Silver plated contacts provide excellent conductivity UL & CSA listed to UL ; a more stringent performance test than UL which makes these connectors suitable for both factory and field installation Intermateable with other brands Meets construction and performance requirements of UL.
4 Practical Applications Designed for Harsh Industrial Environments The Rhino-Hide LZ Series connectors are heavy duty, environmentally sealed plugs and receptacles used for control and instrumentation applications in the harshest environments. These devices are designed to meet or exceed the electrical performance characteristics of MIL-C-0, making them suitable for a variety of industrial environments, such as onshore and offshore drilling operations, aerospace, marine, and land transportation applications, factories, refineries, and more. Broad Range of Configurations for Maximum Flexibility Rhino-Hide LZ Series connectors can be configured to suit a wide range of applications. They can accommodate wire sizes from AWG to /0; anywhere from to contacts; can be cable, conduit, or panel mounted, and have reversible inserts that fit in either male or female shells.
5 Infinite Applications to Help Streamline Operations Rhino-Hide LZ Series connectors provide power, control, and instrumentation connectivity solutions across a wide spectrum of applications. They allow you to easily connect and disconnect equipment for more efficient servicing and less downtime. Factory equipment layout can easily be reconfigured without the need (and expense) for hard-wiring. They can be used for connecting backup power generators during emergencies or plant turnarounds the applications are endless.
6 Cable Mounted Device Components Cable Mounted Plug or Receptacle Typical Plug Assembly Strain Relief Options 0 Typical Receptacle Assembly 0 Environmental Cover Plug Skirt Insert Coupling ut Inline Receptacle Square Flange Receptacle Cable Adapter Grommet Washer 0 Gland ut Mechanical Clamp ut Basketweave Cable Grip
7 Conduit or Panel Mounted Device Components Conduit Mounted Plug or Receptacle Typical Plug Assembly Typical Receptacle Assembly Environmental Cover Plug Skirt Insert Coupling ut Inline Receptacle Conduit Adapter Panel Mounted Plug or Receptacle with Square Flange Typical Plug Assembly Typical Receptacle Assembly Environmental Cover Plug Skirt Insert Coupling ut Panel Mount Adapter Insert Clamp ut
8 Catalog umber Definition LZ-PEKLJ- Series Indicator Device Type P Plug R Receptacle Cover E L Environmental Cover o Cover Cable Hardware K Basketweave M Mechanical Clamp ut D Gland ut T Conduit Adapter P Panel Mount Square Flange with PM Mechanical Clamp PK Square Flange with Basketweave Adapter BLAK Standard Cable Adapter L Long Cable Adapter (use if insert assembly has more than ten contacts [any size] or more than four #0 contacts) Coupling ut BLAK Standard Coupling ut J Jack Coupling ut (for inserts with or more contacts) Grommet Code (for Cable Mounted Devices) Refer to table on pages 0- Conduit Code (for Conduit Mounted Devices) Panel Mount Devices BLAK
9 0--P 0 C0 C C Insert Pattern Code Refer to pages - for diagrams & descriptions Contact Type P Pin (Male) S Socket (Female) Contact Termination Crimp Contact Example: LZ-PEKLJ-0--P Cable mounted plug with basketweave for.000" to."cable; size 0 shell with insert configuration : crimp pins; with environmental cover
10 Ordering Guide: Plugs Straight Plug with Compression ut LZ-PED Series Environmental Cover Plug Barrel Insert Assembly Coupling ut Cable Adapter Grommet Washer Gland ut To specify a complete ordering number, select the grommet code from table below and replace xx, then select appropriate suffix from the appropriate insert configuration table (see pages -) and replace suffix. Jack Coupling nuts should be used with inserts possessing more than contacts. If environmental cover is not required, replace E with L in catalog number. Standard Cable Adapter Long Cable Adapter Standard Coupling ut Jack Coupling ut Standard Coupling ut Jack Coupling ut LZ-PED-xx-suffix LZ-PEDJ-xx-suffix LZ-PEDL-xx-suffix LZ-PEDLJ-xx-suffix LZ-PED-xx-suffix LZ-PEDJ-xx-suffix LZ-PEDL-xx-suffix LZ-PEDLJ-xx-suffix 0 LZ-PED-xx0-suffix LZ-PEDJ-xx0-suffix LZ-PEDL-xx0-suffix LZ-PEDLJ-xx0-suffix C0 LZ-PED-xxC0-suffix LZ-PEDJ-xxC0-suffix LZ-PEDL-xxC0-suffix LZ-PEDLJ-xxC0-suffix LZ-PED-xx-suffix LZ-PEDJ-xx-suffix LZ-PEDL-xx-suffix LZ-PEDLJ-xx-suffix C LZ-PED-xxC-suffix LZ-PEDJ-xxC-suffix LZ-PEDL-xxC-suffix LZ-PEDLJ-xxC-suffix LZ-PED-xx-suffix LZ-PEDJ-xx-suffix LZ-PEDL-xx-suffix LZ-PEDLJ-xx-suffix C LZ-PED-xxC-suffix LZ-PEDJ-xxC-suffix LZ-PEDL-xxC-suffix LZ-PEDLJ-xxC-suffix Grommet Codes Cable Diameter Cable Diameter 0 & & & C0 C C 0 & & & C0 C C.0 to to.. to.0 0. to.0.0 to to to to..00 to to.000. to to..0 to.. to.0. to..0 to.. to.000. to..000 to.. to to to..0 to.. to.0. to..0 to.. to.00 0
11 Ordering Guide: Plugs Straight Plug with Mechanical Clamp ut LZ-PEM Series Environmental Cover Plug Barrel Insert Assembly Coupling ut Cable Adapter Grommet Washer Mechanical Clamp ut To specify a complete ordering number, select the grommet code from table below and replace xx, then select appropriate suffix from the appropriate insert configuration table (see pages -) and replace suffix. Jack Coupling nuts should be used with inserts possessing more than contacts. If environmental cover is not required, replace E with L in catalog number. Standard Cable Adapter Long Cable Adapter Standard Coupling ut Jack Coupling ut Standard Coupling ut Jack Coupling ut LZ-PEM-xx-suffix LZ-PEMJ-xx-suffix LZ-PEML-xx-suffix LZ-PEMLJ-xx-suffix LZ-PEM-xx-suffix LZ-PEMJ-xx-suffix LZ-PEML-xx-suffix LZ-PEMLJ-xx-suffix 0 LZ-PEM-xx0-suffix LZ-PEMJ-xx0-suffix LZ-PEML-xx0-suffix LZ-PEMLJ-xx0-suffix C0 LZ-PEM-xxC0-suffix LZ-PEMJ-xxC0-suffix LZ-PEML-xxC0-suffix LZ-PEMLJ-xxC0-suffix LZ-PEM-xx-suffix LZ-PEMJ-xx-suffix LZ-PEML-xx-suffix LZ-PEMLJ-xx-suffix C LZ-PEM-xxC-suffix LZ-PEMJ-xxC-suffix LZ-PEML-xxC-suffix LZ-PEMLJ-xxC-suffix LZ-PEM-xx-suffix LZ-PEMJ-xx-suffix LZ-PEML-xx-suffix LZ-PEMLJ-xx-suffix C LZ-PEM-xxC-suffix LZ-PEMJ-xxC-suffix LZ-PEML-xxC-suffix LZ-PEMLJ-xxC-suffix Grommet Codes Cable Diameter Cable Diameter 0 & & & C0 C C 0 & & & C0 C C.0 to to.. to.0 0. to.0.0 to to to to..00 to to.000. to to..0 to.. to.0. to..0 to.. to.000. to..000 to.. to to to..0 to.. to.0. to..0 to.. to.00
12 Ordering Guide: Plugs Straight Plug with Basketweave Cable Grip LZ-PEK Series Environmental Cover Plug Barrel Insert Assembly Coupling ut Cable Adapter Grommet Basketweave Gland ut To specify a complete ordering number, select the grommet code from table below and replace xx, then select appropriate suffix from the appropriate insert configuration table (see pages -) and replace suffix. Jack Coupling nuts should be used with inserts possessing more than contacts. If environmental cover is not required, replace E with L in catalog number. Standard Cable Adapter Long Cable Adapter Standard Coupling ut Jack Coupling ut Standard Coupling ut Jack Coupling ut LZ-PEK-xx-suffix LZ-PEKJ-xx-suffix LZ-PEKL-xx-suffix LZ-PEKLJ-xx-suffix LZ-PEK-xx-suffix LZ-PEKJ-xx-suffix LZ-PEKL-xx-suffix LZ-PEKLJ-xx-suffix 0 LZ-PEK-xx0-suffix LZ-PEKJ-xx0-suffix LZ-PEKL-xx0-suffix LZ-PEKLJ-xx0-suffix C0 LZ-PEK-xxC0-suffix LZ-PEKJ-xxC0-suffix LZ-PEKL-xxC0-suffix LZ-PEKLJ-xxC0-suffix LZ-PEK-xx-suffix LZ-PEKJ-xx-suffix LZ-PEKL-xx-suffix LZ-PEKLJ-xx-suffix C LZ-PEK-xxC-suffix LZ-PEKJ-xxC-suffix LZ-PEKL-xxC-suffix LZ-PEKLJ-xxC-suffix LZ-PEK-xx-suffix LZ-PEKJ-xx-suffix LZ-PEKL-xx-suffix LZ-PEKLJ-xx-suffix C LZ-PEK-xxC-suffix LZ-PEKJ-xxC-suffix LZ-PEKL-xxC-suffix LZ-PEKLJ-xxC-suffix Grommet Codes Cable Diameter Cable Diameter 0 & & & C0 C C 0 & & & C0 C C.0 to to.. to.0 0. to.0.0 to to to to..00 to to.000. to to..0 to.. to.0. to..0 to.. to.000. to..000 to.. to to to..0 to.. to.0. to..0 to.. to.00
13 Ordering Guide: Plugs Straight Plug with Conduit Adapter LZ-PET Series Environmental Cover Plug Barrel Insert Assembly Coupling ut Conduit Adapter Conduit (PT) Conduit Code Standard Coupling ut Jack Coupling ut /" LZ-PET- -suffix LZ-PETJ- -suffix -/" LZ-PET- -suffix LZ-PETJ- -suffix 0 -/" LZ-PET- 0-suffix LZ-PETJ- 0-suffix C0 -/" LZ-PET- C0-suffix LZ-PETJ- C0-suffix " LZ-PET- -suffix LZ-PETJ- -suffix C " LZ-PET- C-suffix LZ-PETJ- C-suffix -/" LZ-PET- -suffix LZ-PETJ- -suffix C -/" LZ-PET- C-suffix LZ-PETJ- C-suffix For both Straight Plug with Conduit Adapter (above) and Panel Mount Plug (below): To specify a complete ordering number, select appropriate suffix from the appropriate insert configuration table (see pages -) and replace suffix. Jack Coupling nuts should be used with inserts possessing more than contacts. If environmental cover is not required, replace E with L in catalog number. Panel Mount Plug LZ-PEP Series Environmental Cover Plug Barrel Insert Assembly Coupling ut Panel Mount Adapter Standard Coupling ut Jack Coupling ut LZ-PEP--suffix LZ-PEPJ--suffix LZ-PEP--suffix LZ-PEPJ--suffix 0 LZ-PEP-0-suffix LZ-PEPJ-0-suffix C0 LZ-PEP-C0-suffix LZ-PEPJ-C0-suffix LZ-PEP--suffix LZ-PEPJ--suffix C LZ-PEP-C-suffix LZ-PEPJ-C-suffix LZ-PEP--suffix LZ-PEPJ--suffix C LZ-PEP-C-suffix LZ-PEPJ-C-suffix
14 Ordering Guide: Receptacles Inline Receptacle with Compression ut LZ-RED Series Environmental Cover Receptacle Barrel Insert Assembly Cable Adapter Grommet Washer Gland ut To specify a complete ordering number, select the grommet code from table below and replace xx, then select appropriate suffix from the appropriate insert configuration table (see pages -) and replace suffix. If environmental cover is not required, replace E with L in catalog number. Standard Cable Adapter Long Cable Adapter LZ-RED-xx-suffix LZ-REDL-xx-suffix LZ-RED-xx-suffix LZ-REDL-xx-suffix 0 LZ-RED-xx0-suffix LZ-REDL-xx0-suffix C0 LZ-RED-xxC0-suffix LZ-REDL-xxC0-suffix LZ-RED-xx-suffix LZ-REDL-xx-suffix C LZ-RED-xxC-suffix LZ-REDL-xxC-suffix LZ-RED-xx-suffix LZ-REDL-xx-suffix C LZ-RED-xxC-suffix LZ-REDL-xxC-suffix Grommet Codes Cable Diameter Cable Diameter 0 & & & C0 C C 0 & & & C0 C C.0 to to.. to.0 0. to.0.0 to to to to..00 to to.000. to to..0 to.. to.0. to..0 to.. to.000. to..000 to.. to to to..0 to.. to.0. to..0 to.. to.00
15 Ordering Guide: Receptacles Inline Receptacle with Mechanical Clamp ut LZ-REM Series Environmental Cover Receptacle Barrel Insert Assembly Cable Adapter Grommet Washer Mechanical Clamp ut To specify a complete ordering number, select the grommet code from table below and replace xx, then select appropriate suffix from the appropriate insert configuration table (see pages -) and replace suffix. If environmental cover is not required, replace E with L in catalog number Standard Cable Adapter Long Cable Adapter LZ-REM-xx-suffix LZ-REML-xx-suffix LZ-REM-xx-suffix LZ-REML-xx-suffix 0 LZ-REM-xx0-suffix LZ-REML-xx0-suffix C0 LZ-REM-xxC0-suffix LZ-REML-xxC0-suffix LZ-REM-xx-suffix LZ-REML-xx-suffix C LZ-REM-xxC-suffix LZ-REML-xxC-suffix LZ-REM-xx-suffix LZ-REML-xx-suffix C LZ-REM-xxC-suffix LZ-REML-xxC-suffix Grommet Codes Cable Diameter Cable Diameter 0 & & & C0 C C 0 & & & C0 C C.0 to to.. to.0 0. to.0.0 to to to to..00 to to.000. to to..0 to.. to.0. to..0 to.. to.000. to..000 to.. to to to..0 to.. to.0. to..0 to.. to.00
16 Ordering Guide: Receptacles Inline Receptacle with Basketweave Cable Grip LZ-REK Series Environmental Cover Receptacle Barrel Insert Assembly Cable Adapter Grommet Basketweave Cable Grip Gland ut To specify a complete ordering number, select the grommet code from table below and replace xx, then select appropriate suffix from the appropriate insert configuration table (see pages -) and replace suffix. If environmental cover is not required, replace E with L in catalog number Standard Cable Adapter Long Cable Adapter LZ-REK-xx-suffix LZ-REKL-xx-suffix LZ-REK-xx-suffix LZ-REKL-xx-suffix 0 LZ-REK-xx0-suffix LZ-REKL-xx0-suffix C0 LZ-REK-xxC0-suffix LZ-REKL-xxC0-suffix LZ-REK-xx-suffix LZ-REKL-xx-suffix C LZ-REK-xxC-suffix LZ-REKL-xxC-suffix LZ-REK-xx-suffix LZ-REKL-xx-suffix C LZ-REK-xxC-suffix LZ-REKL-xxC-suffix Grommet Codes Cable Diameter Cable Diameter 0 & & & C0 C C 0 & & & C0 C C.0 to to.. to.0 0. to.0.0 to to to to..00 to to.000. to to..0 to.. to.0. to..0 to.. to.000. to..000 to.. to to to..0 to.. to.0. to..0 to.. to.00
17 Ordering Guide: Receptacles Inline Receptacle with Conduit Adapter LZ-RET Series Environmental Cover Receptacle Barrel Insert Assembly Conduit Adapter Conduit (PT) Conduit Code Inline Receptacle with Conduit Apapter /" LZ-RET- -suffix -/" LZ-RET- -suffix 0 -/" LZ-RET- 0-suffix C0 -/" LZ-RET- C0-suffix " LZ-RET- -suffix C " LZ-RET- C-suffix -/" LZ-RET- -suffix C -/" LZ-RET- C-suffix For both Inline Receptacle with Conduit Adapter (above) and Panel Mount Receptacle (below): To specify a complete ordering number, select appropriate suffix from the appropriate insert configuration table (see pages -) and replace suffix. If environmental cover is not required, replace E with L in catalog number Panel Mount Receptacle LZ-REP Series Environmental Cover Square Flange Receptacle Insert Assembly Insert Clamp ut Panel Mount Receptacle LZ-REP--suffix LZ-REP--suffix 0 LZ-REP-0-suffix C0 LZ-REP-0C-suffix LZ-REP--suffix C LZ-REP-C-suffix LZ-REP--suffix C LZ-REP-C-suffix
18 Ordering Guide: Receptacles Square Flange Receptacle With Basketweave Cable Grip LZ-REPK Series Environmental Cover Square Flange Receptacle Insert Assembly Cable Adapter Grommet Basketweave Cable Grip Gland ut To specify a complete ordering number, select the grommet code from table below and replace xx, then select appropriate suffix from the appropriate insert configuration table (see pages -) and replace suffix. If environmental cover is not required, replace E with L in catalog number Standard Cable Adapter Long Cable Adapter LZ-REPK-xx-suffix LZ-REPKL-xx-suffix LZ-REPK-xx-suffix LZ-REPKL-xx-suffix 0 LZ-REPK-xx0-suffix LZ-REPKL-xx0-suffix C0 LZ-REPK-xxC0-suffix LZ-REPKL-xxC0-suffix LZ-REPK-xx-suffix LZ-REPKL-xx-suffix C LZ-REPK-xxC-suffix LZ-REPKL-xxC-suffix LZ-REPK-xx-suffix LZ-REPKL-xx-suffix C LZ-REPK-xxC-suffix LZ-REPKL-xxC-suffix Grommet Codes Cable Diameter Cable Diameter 0 & & & C0 C C 0 & & & C0 C C.0 to to.. to.0 0. to.0.0 to to to to..00 to to.000. to to..0 to.. to.0. to..0 to.. to.000. to..000 to.. to to to..0 to.. to.0. to..0 to.. to.00
19 Ordering Guide: Receptacles Square Flange Receptacle With Mechanical Clamp ut LZ-REPM Series Environmental Cover Square Flange Receptacle Insert Assembly Cable Adapter Grommet Washer Mechanical Clamp ut To specify a complete ordering number, select the grommet code from table below and replace xx, then select appropriate suffix from the appropriate insert configuration table (see pages -) and replace suffix. If environmental cover is not required, replace E with L in catalog number Standard Cable Adapter Long Cable Adapter LZ-REPM-xx-suffix LZ-REPML-xx-suffix LZ-REPM-xx-suffix LZ-REPML-xx-suffix 0 LZ-REPM-xx0-suffix LZ-REPML-xx0-suffix C0 LZ-REPM-xxC0-suffix LZ-REPML-xxC0-suffix LZ-REPM-xx-suffix LZ-REPML-xx-suffix C LZ-REPM-xxC-suffix LZ-REPML-xxC-suffix LZ-REPM-xx-suffix LZ-REPML-xx-suffix C LZ-REPM-xxC-suffix LZ-REPML-xxC-suffix Grommet Codes Cable Diameter Cable Diameter 0 & & & C0 C C 0 & & & C0 C C.0 to to.. to.0 0. to.0.0 to to to to..00 to to.000. to to..0 to.. to.0. to..0 to.. to.000. to..000 to.. to to to..0 to.. to.0. to..0 to.. to.00
20 Technical Specifications Electrical Service Ratings : voltage allowable through the contacts - a function of the dielectric separation between adjacent contacts and between contacts and shell. Electrical Service Voltage Military Ratings MIL-C-0 Specifications on-circuit Breaking DC (V) AC (V) ational Electrical Code (EC) Ratings on-circuit Breaking DC (V) Circuit Breaking AC (V) Minimum Creepage Distance inches Minimum Clearance Distance Instrument 0 00 / A / / D / / E / / B / / C / Creepage Distance: the shortest path between two conductive parts (or between a conductive part and the bounding surface of the equipment) measured along the surface of the insulation. A proper and adequate creepage distance protects against tracking (a process that produces a partially conducting path of localized deterioration on the surface of an insulating material). Clearance Distance: the shortest distance between two conductive parts (or between a conductive part and the bounding surface of the equipment) measured through air. Clearance distance helps prevent dielectric breakdown between electrodes caused by the ionization of air. inches Ampacity Rating: the amount of current an individual contact may carry the total current carrying capacity is a function of contact design and ability of the insulation to withstand the associated temperature rise caused by increase in current. OTE: Ampacity ratings are subject to derating based on regulations within the ational Electrical Code, including Articles 0. and 0.0. Contact on-circuit Breaking Ampere Rating (AWG) MS a EC b # # # 0 #0 0 # 0 a MS: Ampere rating based on Military Specification MIL-C-0, total current carrying capacity is a function of the insert temperature which is rated at F (0 C) for continuous operation. The total operating temperature is the summation of heat dissipated by each contact and the ambient temperature. b EC: The non-interrupting current ratings, which are based on the temperature of the contacts being within the range specified by UL and wire sizes in accordance with the ational Electrical Code. Insert Configuration Listing The Insert Configuration listing is used primarily to identify various contact insert arrangements. For the engineer, it provides visual selection of the insert configuration needed to satisfy other requirements. For the end user, the list provides general information useful in the termination of plugs and receptacles. To aid the reader, the insert configurations are presented in order of the number of contacts in each insert. The male insert illustration (and those on the following pages) is shown as it appears when viewed from the front. Contacts are shown by both physical position within the configuration and by contact number. The contact number corresponds to the contact position shown on the rear face of the insert illustrated as well as to both the front and rear faces of the mating insert. The symbol used to show contact location is indicative of contact size. An explanation of contact symbols is presented on each page of the listing. Drawings are reduced from actual size of the insert configuration. Contact Location umbers Contact Symbols Alternate Key Positions 0
21 General Performance Specifications Property Temperature Humidity Resistance Moisture Resistance Liquid Ingress Protection Corrosion Resistance Chemical Resistance Solids Ingress Protection Shock Resistance Vibration Contact Retention Standard / Test Method -0 F to F (- C to 00 C) MIL-DTL-0/MIL-STD- Method 00, Type MIL-DTL-0/MIL-STD- Method 00, Type II, Test Condition A IPX Salt spray: 00 hours -o exposure of base metal Oil, most acids and alkalis IEC0 IPX Mated connectors withstand a pulse of approximate half sine wave of 00g magnitude with duration of milliseconds applied in axes per EIA-- Condition D MIL-STD- Method 00, Test Condition II EIA--
22 LZ Series Multi-Pin Connectors Insert Configurations Contacts --PR Front Face Gof Pin Insert Shown umber of Contacts Wire (AWG) D Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0 umber of Contacts Wire (AWG) D -C0-0PR Suffix - Pin Contacts 0-P Suffix - Socket Contacts 0-S G Contacts umber of Contacts Wire (AWG) D Suffix - Pin Contacts -P Suffix - Socket Contacts -S umber of Contacts Wire (AWG) 0 -C-PR D Suffix - Pin Contacts -P Suffix - Socket Contacts -S G umber of Contacts Wire (AWG) 0 D Suffix - Pin Contacts -P Suffix - Socket Contacts -S umber of Contacts Wire (AWG) D --P Suffix - Pin Contacts -P Suffix - Socket Contacts -S Contacts umber of Contacts Wire (AWG) --P D Suffix - Pin Contacts -P Suffix - Socket Contacts -S umber of Contacts Wire (AWG) --P D Suffix - Pin Contacts -P Suffix - Socket Contacts -S --P Crimp Grounding Contact Termination Symbol Contact Symbols Wire AWG --P 0
23 Insert Configurations Contacts Front Face of Pin Insert Shown umber of Contacts Wire (AWG) A Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0 umber of Contacts Wire (AWG) --P A Suffix - Pin Contacts 0-P Suffix - Socket Contacts 0-S umber of Contacts Wire (AWG) A Suffix - Pin Contacts -P Suffix - Socket Contacts -S umber of Contacts Wire (AWG) Service Voltage -0-P Rating D Suffix - Pin Contacts -P Suffix - Socket Contacts -S umber of Contacts Wire (AWG) E 0 Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0--P 0 0 Contacts umber of Contacts 0 Wire (AWG) 0--P A Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0 umber of Contacts 0 Wire (AWG) Service Voltage 0--P Rating A Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0 0--P 0 0--P 0 Crimp 0--P Grounding Contact Termination Symbol 0 Contact Symbols Wire AWG 0 0
24 LZ Series Multi-Pin Connectors Insert Configurations 0 Contacts umber of Contacts Wire (AWG) 0 Service Voltage Rating D D Suffix - Pin Contacts -P Suffix - Socket Contacts -S Contacts 0 0--P -0-P Front Face of Pin Insert Shown 0 0 umber of Contacts Wire (AWG) 0 D 0 Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0 --P 0 Contacts umber of Contacts Wire (AWG) D Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0 --P 0 Contacts umber of Contacts Wire (AWG) A Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0 umber of Contacts Wire (AWG) --P A Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0 Crimp Grounding Contact Termination Symbol Contact Symbols Wire AWG P
25 -0-P 0 Insert Configurations Contacts LZ Series Multi-Pin Connectors Front Face of Pin Insert Shown umber of Contacts Wire (AWG) A Contact Termination 0-0-P Crimp Suffix - Pin Contacts -P Suffix - Socket Contacts -S umber of Contacts Wire (AWG) D P Suffix - Pin Contacts -P Suffix - Socket Contacts -S Contacts umber of Contacts 0 Wire (AWG) Service 0-0-P B A Voltage Rating Center Outer 0 Suffix - Pin Contacts -P Suffix - Socket Contacts -S umber of Contacts 0 Wire (AWG) Service B A Voltage Rating 0-0-P Center Outer 0 Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0 0 umber of Contacts Wire (AWG) Service Voltage D Rating 0-0-P D 0 Suffix - Pin Contacts -P Suffix - Socket Contacts -S P 0 0 Contacts umber of Contacts 0 Wire (AWG) Service Voltage Rating -0-P E D 0 Suffix - Pin Contacts -P Suffix - Socket Contacts -S 0 0 Crimp --P Grounding Contact Termination Symbol 0 0 Contact Symbols Wire AWG 0
26 0 LZ Series Multi-Pin Connectors --P 0 Insert Configurations Contacts --P umber of Contacts Wire (AWG) -0-P Service A A Voltage Rating --P Suffix - Pin Contacts -P Suffix - Socket Contacts -S P --P -0-P --P Front Face of Pin Insert Shown Contacts -0-0P umber of Contacts Wire (AWG) -0-P A Suffix - Pin Contacts -P Suffix - Socket Contacts -S umber of Contacts Wire (AWG) -0-0P A -0-P 0 Suffix - Pin Contacts -P Suffix - Socket Contacts -S umber of Contacts --P Wire (AWG) -0-0P A 0 Suffix - Pin Contacts 0-P Suffix - Socket Contacts 0-S umber of Contacts Wire (AWG) D --P -0-0P Suffix - Pin Contacts -P Suffix - Socket Contacts -S Contacts umber of Contacts --P Wire (AWG) D Contact Termination--P Crimp Suffix - Pin Contacts -P Suffix - Socket Contacts -S --P Grounding Contact Crimp Termination Symbol 0 0 Contact Symbols Wire AWG --P --P P
27 0 Insert Configurations 0 Contacts umber of Contacts Wire (AWG) Service Voltage Rating D A 0 Contact Termination-0-P Crimp Suffix - Pin Contacts--P -P Suffix - Socket Contacts -S Contacts umber of Contacts Wire (AWG) A --P --P Suffix - Pin Contacts -P Suffix - Socket Contacts --P -S Contacts -0-P -0-P --P umber of Contacts Wire (AWG) --P --P Inst. --P Suffix - Pin Contacts -P Suffix - Socket Contacts -S --P umber of Contacts -0-P Wire (AWG) 0 Service A A Voltage Rating -0-P 0 Contact Termination Crimp Suffix - Pin Contacts -P Suffix - Socket Contacts -S -0-P LZ Series Multi-Pin Connectors -0-P --P umber of Contacts Wire (AWG) A --P Suffix - Pin Contacts -P Suffix - Socket Contacts --P -S Contacts Contacts Grounding Contact -0-P Crimp Termination Symbol -0-P --P --P --P -0-P -0-P umber of Contacts Wire (AWG) A -0-P 0 Suffix - Pin Contacts -P Suffix - Socket Contacts -S Contact Symbols Wire AWG -0-P 0 0 Front Face of Pin Insert Shown
28 Plug Dimensions LZ Series Multi-Pin Connectors Straight Plug with Compression ut LZ-PED Series With Standard Cable Adapter A (in) B (in) C (in) C C C... ( A ) ( Ø B ) With Long Cable Adapter A (in) B (in) C (in) C C C.. 0. ( C ) Straight Plug with Mechanical Clamp ut LZ-PEM Series With Standard Cable Adapter A (in) B (in) C (in) D (in) E (in) C C C..... ( Ø B ) ( A ) ( D MAX ) ( E ) With Long Cable Adapter A (in) B (in) C (in) D (in) E (in) C C C ( C )
29 Plug Dimensions Straight Plug with Conduit Adapter LZ-PET Series ( Ø B ) D (in) A (in) B (in) C (in) Pipe TPI... /... -/ /. C / C / C.0.. -/ ( A ) ( D ) PT THREAD SIZE ( C ) Straight Plug with Basketweave Cable Grip LZ-PEK Series With Standard Cable Adapter A (in) B (in) C (in) C C C... ( A ) ( Ø B ) With Long Cable Adapter A (in) B (in) C (in) C C C.. 0. ( C )
30 Receptacle Dimensions Inline Receptacle with Compression ut LZ-RED Series With Standard Cable Adapter A (in) C (in) D (in) E (in) C C C....0 ( A ) ( E ) ( D ) With Long Cable Adapter A (in) C (in) D (in) E (in) C C C ( C ) Inline Receptacle with Mechanical Clamp ut LZ-REM Series With Standard Cable Adapter A (in) C (in) D (in) E (in) F (in) G (in) C C C ( E ) ( D ) ( A ) ( G MAX ) ( F ) With Long Cable Adapter A (in) C (in) D (in) E (in) F (in) G (in) C C C ( C ) 0
31 Receptacle Dimensions Inline Receptacle with Conduit Adapter LZ-RET Series ( D ) A (in) B (in) Pipe TPI C (in) D (in) E (in). /.... -/ /....0 C0.0 -/ C /...0 C. -/...0 ( E ) ( A ) ( B ) PT THREAD SIZE ( C ) Inline Receptacle with Basketweave Cable Grip LZ-REK Series With Standard Cable Adapter A (in) C (in) D (in) E (in) C C C....0 ( A ) ( E ) ( D ) With Long Cable Adapter A (in) C (in) D (in) E (in) C C C ( C )
32 Plug Dimensions LZ Series Multi-Pin Connectors Panel Mount Plug LZ-PEP Series A (in) B (in) C (in) G (in) H (in) J (in) C C C ( C ) ( Ø B ) ( A ) ( H SQ ) ( G SQ ) ( Ø J ) THRU HOLE Receptacle Dimensions Panel Mount Receptacle LZ-REP Series A (in) B (in) C (in) E (in) F (in) J (in) K (in) L (in) ( A SQ ) ( B SQ ) ( J ) ( L ) (. ) C C C ( Ø E ) THRU HOLE ( PL) ( Ø C ) MODIFIED ACME THREAD ( F ) ( Ø K )
33 Receptacle Dimensions Square Flange Receptacle With Basketweave Cable Grip LZ-REPK Series With Standard Cable Adapter A (in) B (in) C (in) D (in) E (in) F (in) C C C ( Ø E ) THRU HOLES ( PL) ( A ) ( B SQ ) ( D SQ ) With Long Cable Adapter A (in) B (in) C (in) D (in) E (in) F (in) C C C ( Ø F ) ( C ) Square Flange Receptacle With Mechanical Clamp ut LZ-REPM Series With Standard Cable Adapter A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) ( B SQ ) ( D SQ ) ( F ) C C C ( Ø E ) HOLE THRU ( PL) ( A ) ( G MAX ) With Long Cable Adapter A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) ( Ø H ) C C C ( C )
34 Multi-Pin Industrial Connectors Request for Quote To obtain a price and availability quote for Rhino-Hide LZ Series Multi-Pin Connectors, submit an online request at or complete the form below and to rhinohidecs@leviton.com, fax to -00--, or submit to your local Leviton sales representative. CUSTOMER AME: CUSTOMER UMBER: CUSTOMER ADRESS: RETUR QUOTE VIA: ATT: FAX: OTHER: DATE: CATALOG UMBER Field Field Field Field Field Field Field Field LZ LZ LZ LZ LZ LZ LZ LZ LZ LZ LZ LZ Field 0 Field QTY ADDITIOAL IFORMATIO (Use this space to add additional information that may be helpful.)
35 Multi-Pin Industrial Connectors: Constructing Your Catalog umber Field Field Field Field Field Field Field Field Field 0 Field LZ Field Description Options Available Field Device Type P = Plug R = Receptacle Field Cover E = Environmental Cover L = o Cover Field Cable Hardware K = Basketweave D = Gland ut P = Panel Mount PK = Square Flange with Basketweave Field Adapter BLAK = Standard Cable Adapter Field Coupling ut BLAK = Standard Coupling ut Field Field Grommet Code (for Cable Mounted Devices) Conduit Code (for Conduit Mounted Devices) Panel Mount Devices Table Lookup: Digit Code; Refer to pages 0- BLAK 0 C0 M = Mechanical Clamp ut T = Conduit Apapter PM = Square Flange With Mechanical Clamp L = Long Cable Adapter (use if insert assembly has more than ten contacts [any size], any pressure contact, or more than four #0 contacts) J = Jack Coupling ut (for inserts with or more contacts) C C Field Insert Pattern Code Table Lookup: or Digit Code; Refer to pages - for diagrams and descriptions Field Contact Type P = Pin (Male) S = Socket (Female) Field 0 Contact Termination = Crimp Contact
36 More Power Solutions for Rigorous Environments The family of products Rhino-Hide Single Pole Cam Connectors Rhino-Hide Single Pole Cam-Type Devices are designed to provide superior service and durability, even under the most severe operating conditions. This family of devices provides power connectivity for applications requiring up to 0 amps at 00 volts. The cam-locking design makes these ideal for applications where vibration is a factor, or for general security to prevent accidental disconnect from strain on the connectors. Typical Applications include: n n n n n Mining and oil & gas drilling operations Shore power Entertainment venues and fairs Stage and studio Water purification plants Rhino-Hide High-Amperage Single Pole Connectors Rhino-Hide High Amperage Single Pole Devices are designed to deliver up to Amps at 000 volts, AC or DC, under the most extreme conditions. They accommodate cables ranging in size from MCM to MCM. This family of devices is one of the most widely specified for land-based oil and gas drilling operations. They are used to connect mud pumps, top drives, and other high powered equipment to power houses. They are also commonly used in large scale temporary power backup systems for connecting generators to electrical service panels. Rhino-Hide EMA Wiring Devices These devices are watertight, submersible, corrosion resistant and have threaded fittings to provide positive locking connections in physically demanding environments that suffer from exposure to weather, chemicals, vibration, and physical strain, including: n n n n n Oil Drilling Rigs Mining Operations Shore Power Wind Power Turbines Construction Sites Visit our Website at: industrial@leviton.com Q- Leviton Manufacturing Co., Inc. 0 Service Rd, Melville, Y Telephone: FAX: Tech Line (:0AM-:0PM E.S.T. Monday-Friday): Leviton Manufacturing Co., Inc. All rights reserved. 0
M-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
More informationAmphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
More information0.703 dia. [17.86] Cord Connector Contact Arrangements Shown from rear of connector DIMENSIONS ARE FOR REFERENCE ONLY
ONLINE CATALOG SWITCHCRAFT, INC. N. Elston Ave. Chicago, IL 00 77 79-700 FAX: 77 79-19 www.switchcraft.com EN MINI WEATHERTIGHT CONNECTOR SERIES EN CORD CONNECTOR 1.8 [9.8] 0. REF 0.70 dia. [17.8] PIN
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationAmphenol Miniature Cylindrical Proprietary/MIL-C-26482, Series 1
Amphenol Miniature Cylindrical Proprietary/ PT PT-SE SP 3 DESIGN CHARACTERISTICS Medium size, widely used cylindrical Operating voltage to 1,000 VAC (RMS) at sea level Environment resistant Quick positive
More informationversatile connectors for any application
M-line MULTI-PIN CONNECTORS VERSATILE, RELIABLE CONNECTIONS versatile connectors for any application Choose from a wide range of configurations and options. Wire SIZES and number of contacts Wire sizes
More information49 Series Connectors and Receptacles. A Comprehensive Line of Rugged, High Amperage Electrical Connections for the Most Demanding Environments
49 Series Connectors and Receptacles A Comprehensive Line of Rugged, High Amperage Electrical Connections for the Most Demanding Environments INTRODUCTION Single Pole Panel Mount Receptacles For Use on
More informationEFP SERIES FLAMEPROOF ELECTRICAL CONNECTORS FOR HAZARDOUS ENVIRONMENTS
EFP SERIES FLAMEPROOF ELECTRICAL CONNECTORS FOR HAZARDOUS ENVIRONMENTS Table of Contents EFP Introduction 4 Connector Features 5-7 Code Logic 8 Inline Plug w Threaded Entry Metric 9 Inline Plug w Mechanical
More informationThe Custom Interconnect Leader
SC Series.337.307.040.003.085.194 MIN FLARE TO MEET GAGE TEST.276 MIN.549.781 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR:
More informationATP SERIES ATP Series
ATP SERIES ATP Series 87 ATP Series Overview ATP Series connectors are designed as a high-performance, cost-effective, thermoplastic solution to be used within the Marine, Heavy Equipment, Agricultural,
More informationPosi-Lok Plugs and Panels
THE SAFEST ELECTRICAL SYSTEM FOR HIGH AMPERAGE CONNECTIONS, POSI-LOK IS PART OF THE CAM-LOK FAMILY OF CONNECTORS. THE GROUND ALWAYS MAKES FIRST AND BREAKS LAST ALL POSI-LOK SYSTEMS ARE UL LISTED AND CSA
More informationRinglock is a range of robust circular
Connectors is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost.
More informationTABLE OF CONTENTS. IEC and IEC Pin and Sleeve Devices. IEC and IEC Mechanical Interlocks. Manual Disconnect Switches
TABLE OF CONTENTS IEC-309-1 and IEC-309- Pin and Sleeve Devices Introduction... - Material Specifications... 6-7 North American Ratings (0 to 100 Amp)... 8-16 Accessories... 17-18 International Ratings
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How
More informationDura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationSpecial Purpose Plugs and Receptacles
Special Purpose Plugs and Receptacles Application Applications: Special purpose plugs and receptacles listed in this section are for use in nonhazardous areas, where environmental or application considerations
More informationPRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
More informationR-Jack Solution. Overview. Applications
Overview In today s world of high-speed communications, Ethernet has become the platform for all voice, video and data services. R-JACK Ethernet Interconnect Solution, OCC s ruggedized family of RJ-45
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HIGH POWER CONNECTORS Panel Mounts and Cord Plugs HPC Series Switchcraft
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
More informationPRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
More informationApplications & Features, Type SSMP When using blind mate connectors in an application, careful consideration has to be given to choosing the right con
SSMP Push-On Connectors & Adapters THE SSMP (Sub-Sub-Miniature-Push-On) is a 1.7 mm connector, using solid dielectric interface. The connector is 70% of the size of the SMP and therefore allows even higher
More informationRJF TV Ethernet Connection System for Harsh Environment
RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.
More informationMating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationCannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationSMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
More informationR-JACK SOLUTION. Overview. Applications U S A
Overview In today s world of high-speed communications, Ethernet has become the platform for all voice, video and data services. R-JACK Ethernet Interconnect Solution, OCC s ruggedized family of RJ-45
More informationProduct Performance Specifications QuadraPaddle Connector
Product Performance Specifications QuadraPaddle Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the QuadraPaddle Connector and connector system.
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Plug
Series 0 Mighty Mouse ouble-start ACME Thread Plug 0-00 and 0-00 Ordering Information Series 0 Series 0 Mighty Mouse Connector features a double-start modified stub ACME mating thread for improved protection
More informationPRODUCT SPECIFICATION
RECEPTACLE 1.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME
More informationSeries PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
More information62GB. Amphenol Series 62GB. Applications. Features
Applications Features 62GB Amphenol 62GB Series connectors are built to British Standard Specification BS 9522 F00 17 which is similar to US military specification MIL-DTL-26482. They are machined from
More informationcircular connector assemblies
defence/aerospace/industrial/commercial circular connector assemblies Manufactured in the EU Circular Connectors At API Technologies Corp. we know it is rare to find an off-the-shelf connector that completely
More informationREP SERIES High Reliability Rectangular Plastic Connectors
REP SERIES High Reliability Rectangular Plastic Connectors Fire & Smoke standards compliance High Performance and safe connector Cost saving solution IP66 & IP67 sealing HIGH RELIABILITY The REP connector
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationPRODUCT SPECIFICATION
DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs, Ø2.00mm Page 1 DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs, Ø2.00mm Page 2 1.0 SCOPE. DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs,
More informationPin & Sleeve. EUREKA-HD Series WATERPROOF SPLASHPROOF. Heavy duty Industrial Wiring Devices
Pin & Sleeve EUREKA-HD Series Heavy duty Industrial Wiring Devices WATERPROOF SPLASHPROOF Pin & Sleeve PIN & SLEEVE DEVICES EUREKA-HD Series Watertight and Splashproof IEC REFERENCE STANDARDS IEC 60309-1
More informationREP SERIES High Reliability Rectangular Plastic Connectors
REP SERIES High Reliability Rectangular Plastic Connectors Fire & Smoke standards compliance High Performance and safe connector Cost saving solution IP66 & IP67 sealing HIGH RELIABILITY The REP connector
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationThe Custom Interconnect Leader
7-16 Series.354.276.843.811 ELECTRICAL Nominal Impedance: Frequency Range: Voltage Rating: Dielectric Withstanding Voltage: Insulation Resistance: VSWR: Intermodulation: 50 ohms DC to 7 GHz 2,700 volts
More informationD-Series High Reliability Circular Connectors
D-Series High Reliability Circular Connectors Technology Company, Inc. integramate D-Series Circular Connectors QA Technology integramate D-Series Connectors are high quality, plastic circular connectors
More informationTerminal Junction System (MIL-T and Commercial)
Introduction Product Facts The TJS connections are inherently more reliable than conventional threaded and solder terminations. The user s wiring is crimped to gold plated pin contacts, conforming the
More informationEN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
More informationPRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
More informationProduct Specification
Product Specification PR041-01 Revision A0 (Date 4-3-2017) Stewart Connector 11118 Susquehanna Trail South Glen Rock, Pa. 17327-9199 Ph: (717) 235-7512 Fax: (717) 235-4675 Product Specification PR0410-01
More informationPRODUCT SPECIFICATION
RECEPTACLE.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2. PRODUCT NAME AND
More informationHigh Reliability Rectangular Plastic Connector
High Reliability Rectangular Plastic Connector The REP connector is a multi pole IP66 sealed rectangular plastic connector which provides a quick, reliable and easy connection in all electronic applications.
More information2M Series Selection Table. 2M801, 2M803, 2M804 and 2M805
M Series Selection Table M0, M0, M0 and M0 SERIES M0 M0 M0 M0 PAGES Page -0 Pages - Pages - Pages -0 TYPE Dual-Start ACME Thread Bayonet Push-Pull Tri-Start ACME Thread DESCRIPTION More rugged keys and
More informationEnvironmentally Sealed
Weather-Pack 16 Metri-Pack 19 AMP Superseal 24 Ampseal 16 27 M12 Network 30 DIN Connectors 31 Schlemmer / Din Conduit Sealed 32 Schlemmer / Din Contact Sealed 34 Ideal for applications requiring protection
More informationElectrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
More informationMinimum cross sectional area of Conductor mm²
Selection Overview Hawke International connectors are ideal for use in hazardous areas commonly found in Oil and Gas exploration, production and process plants. Their features, however, also offer numerous
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationElectrical Test voltage (Vrms) Service sea level at m M I II
Applications Compact profile and high density connectors for all military and aeronautical purposes Standards MIL-C 38999 Series II - QPL approved NFC 93422 HE 309 VG 96912 series II PAN 6433-1 BS 9522
More informationINCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
TNC Connectors Flexible Cable... 3 In-Series Adapters... 4 Specifications... 2 RF Adapter Kit Adapters... 6 N Connectors Panel Mount and In-Series Adapters... 10 Flexible Cable... 8 Specifications... 7
More informationFISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationDEUTSCH AFD Series Connectors Qualified to MIL-DTL Series II
DEUTSCH AFD Series Connectors Qualified to MIL-DTL-26482 Series II Miniature Circular Connectors with Quick- Connect Bayonet Coupling and Environmental Sealing to Help Withstand Harsh Environments DEUTSCH
More informationPRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
More informationUSBF TV (USB-A) ROHS COMPLIANT N & BZ. Amphenol. USB connection system for harsh environment. Part number code
USBF TV (USB-A) USB connection system for harsh environment ROHS COMPLIANT N & BZ With USB Field, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust
More informationNuclear Power Generation Range 8N45 SERIES. Reactor Containment Certified Connectors
Nuclear Power Generation Range 8N45 SERIES Reactor Containment Certified Connectors 1 8N45 SERIES Product Overview 8N45 Product Keys Description: Class 1E qualified connectors Quick connect ¼ turn bayonet
More informationMini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
More informationµcom-10gb + MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors Amphenol Socapex
Harsh Environment 10Gb Ethernet Micro Connectors 15mm µcom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance
More informationTNC SERIES Miniature Coaxial Connectors
SERIES Miniature Coaxial Connectors FEATURES connectors, medium sized coaxial connectors with thread coupling, are designed for applications where extreme vibration is encountered.the increased rigidity
More informationFeatures / Options. - MP-62 Series
MULTIPIN CONNECTORS Amphenol has an extensive range of circular and rectangular multipin connectors ideally suited to the entertainment industry. Featuring rugged housings and precision made contacts these
More informationAMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
More informationStandard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
More informationHIGH POWER CONTACT ELECTRICAL SPECIFICATIONS
HIGH POWER CONTACT ELECTRICAL SPECIFICATIONS 11.12.438 8.83.348 5.72.225 8.83.348 11.12.438 12.70.500 Receiver Contact Part # 610 149 101 38.48 1.515 36.20 1.425 12.70.500 ITA Contact Part # 610 150 101
More informationSwitch rated plugs and receptacles with NEMA 4X protection
DSN Features and Ratings p. 22 DSN20 p. 23 DSN30 p. 25 DSN60 p. 27 Spare parts p. 29 Dimensions p. 31 21 Switch rated plugs and receptacles with NEMA 4X protection DSN Series products are switch and hp
More informationAT, ATM and ATP Series Kits Are Now Available!!!
Sine Systems AT, ATM and ATP Series Kits Are Now Available!!! Q: Why are we offering kits? A: Making kits available to our customers allows for reducing the number of part numbers necessary for any given
More informationProduct Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
More informationATM SERIES ATM Series
SERIES Series CONNECTOR SOLUTIONS 21 Series Overview Series connectors are a high-performance, cost-effective solution specifically designed for smaller AWG applications, while still maintaining the strengths
More informationUTS UTS. UTS provides a connection that performs faster, easier, safer and more reliable, it makes :
Company Profile UTS Contents Company profile... 2 Contents... 3 Description... 3 Overview TRIM TRIO... 4 Major features & benefits 5-9 Contact styles... 5 Rapid and secure locking system... 6 Rapid and
More informationD-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
More informationCompact plugs and receptacles standard or high temperature rated
PN Features and Ratings p. 118 PN20 p. 119 PN20 High Temp p. 121 Spare parts p. 123 Dimensions p. 125 Compact plugs and receptacles standard or high temperature rated PN Series plugs and receptacles offer
More informationPrices, specifications, statement of warranty, and other terms and conditions are subject to change without notice by Lighthorse Technologies, Inc.
Section Index Connectors Specifications... 93 Flexible Cable... 95 Panel Mount... 99 Bulkhead... 100 PCB Mount... 101 In Series Adaptors... 103 Other Information Assembly Instructions... 176 Cable Assembly...
More informationA Complete Floor Box System for Concrete
A Complete Floor Box System for Concrete Leviton has it all. From the floor box itself to the devices inside, our system delivers superior electrical power, AV and networking solutions. Delivering The
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationµcom-10gb + Amphenol MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors
Harsh Environment 10Gb Ethernet Micro Connectors 15mm µcom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationSMA - 50 Ohm Connectors
142-0701-621 4 142-0701-626 4 142-0701-631 4 142-0701-636 4 142-0701-701 7 142-0701-706 7 142-1701-011 5 142-1701-016 5 142-1701-031 4 142-1701-036 4 142-1701-041 5 142-1701-046 5 142-1701-121 5 142-1701-126
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationF-LINK INTER-CONNECT. Overview. Background. F-LINK Inter-Connect Solution
F-LINK Inter-Connect Solution PRELIMINARY Overview Optical Cable Corporation (OCC ) introduces the F-LINK Inter-Connect platform, which is simply the most remarkable connector system ever conceived. Born
More informationSSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature
More informationRJF RB Ethernet connection system for harsh environment Industrial Ethernet
RJF RB Ethernet connection system for harsh environment Industrial Ethernet RJFRB allows you to use an Ethernet Class D / Cat 5e and Class E / Cat 6 connection for 10 BaseT, 100 BaseTX or 1000 BaseT networks
More informationEPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationMiniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
More informationCONNECTORS & RECEPTACLES
STRAIGHT CORD PLUG with Extended Barrel TYPE 12BL6M TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp.
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
More informationAEROSPACE, DEFENSE & MARINE /// DL AND DBA SERIES CONNECTORS
DEUTSCH DL and DBA Series Connectors Qualified to MIL-DTL-83723 Series III Weight-Saving Aluminum Connectors Designed for Rugged Use and High Temperatures DEUTSCH DL and DBA Series Connectors Weight-Saving
More informationProduct Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
More informationRight angle press-fit D-Sub connectors
Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN
More informationCONNECTORS & RECEPTACLES
TINI Q-G MINIATURE CONNECTORS DESIGN FEATURES STYLE Streamlined, miniaturized with nickel-plated metal and contrasting black plastic parts. Designed for light weight and unobtrusiveness. Also available
More informationPERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE, JAM NUT MOUNTED, HERMETIC SEAL, CLASS 2)
INCH-POUND MIL-PRF-39012/14C 10 August 2016 SUPERSEDING MIL-PRF-39012/14B 18 September 1977 PERFORMANCE SPECIFICATION SHEET CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES C (UNCABLED-RECEPTACLE, FEMALE,
More informationSECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON. Visit for more information
SECTION 12 SSMA/SSMB/SSMC R121/R203/R202 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents SSMA Introduction... 12-4 Characteristics... 12-4 Plugs... 12-5 Receptacles...
More informationHan PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
More information