GE Industrial Solutions. UL-Modular Catalog. ElfaPlus * Modular DIN-rail devices with UL approval. Lite Version.

Transcription

1 GE Industrial Solutions ElfaPlus * Modular IN-rail devices with UL approval Lite Version

2 IN-rail Miniature ircuit reakers IN-rail Ground Fault evices ccessories and usbars IN-rail Surge rresters and Net nalyzers

3 IN-rail Miniature ircuit reakers. atalog number guide. EP00 ULH (ranch circuit protection).7 EP00 UL (Supplementary protection).9 EP0 UL (Supplementary protection)

4 ElfaPlus line Miniature ircuit reakers ULH and UL product number atalog number guide for ElfaPlus line Miniature ircuit reakers (atalog number for illustrative purposes only) Miniature ircuit reakers Examples EPUL0 EP UL - 0 EPUL EP UL - 0 EP0UL EP 0 UL - 5 EP0UL0 EP 0 UL - 0 EP0ULH5 EP 0 ULH 5 EP0ULH5 EP 0 ULH 5 EP0ULH5 EP 0 ULH 5 EP0ULH45 EP 0 ULH 4 5 EP XX Y WWW Z WW EP Name of the range - ElfaPlus Interrupting rating 0: 0k : k,,, 4 Type of approval UL: 077 ULH: V V 77V 480V Z = Tripping curve:,, WW = mpere rating () ircuit breakers () Supplementary protection.

5 EP00 ULH (ranch circuit protection) UL Listed 489 S c. No.5-0 EN/IE k 5k 77/480Vac UL FILE mpere rating () 0.5- Reference temperature F/ Terminal capacity flexible/rigid cable Max. Torque N.m/lbs.in E /5 4- WG 4.5/9.8 Rated voltage (V), V V 0 5 V k 0 0 V 0 5 k 0 0 Interrupting ratings pplication, Line protection UL Listed 489 performances Interrupting ratings Standards UL489, S c. No.5-0 IE 0947-, IE pprovals / Marking IE performances Thermal setting rated current Rated voltage (V) Weight/pole oz.(g) Terminal capacity flexible/rigid cable (mm) 0.5- /45V 4.(0) 0.75/- 5/5 Short-circuit capacity according to IE V () dd-on devices Icu (k) short-circuit capacity according to IE uxiliary contacts V 0 5 Icc(k) 5 0 General performance Minimum operating voltage Tripping characteristics Rated frequency (Hz) Mechanical/electrical endurance Humidity acc. to IE /-0 Motor operator () sk for availability. Under Type approval /0 0000/ %RH at F/55,, Instantaneous tripping ranges acc. to IE characteristic to 5 times mpere rating characteristic 5 to 0 times mpere rating characteristic 0 to 0 times mpere rating.

6 Series EP00 ULH UL489 - Series EP00 ULH - 0k - characteristics -- () P P P Stocked in Mt. Juliet istribution enter. Subject to change. imensional drawings curve EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH5 EP0ULH EP0ULH8 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 EP0ULH EP0ULH45 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 EP0ULH5 EP0ULH EP0ULH8 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 EP0ULH EP0ULH45 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 Pack. Series EP.7 (70) 0.7 (8).7 (70) () (8) 0.4 () (8) ()(45).77 (45).8 (5).4 curve EP0ULH0.5 EP0ULH0 EP0ULH0 EP0ULH0 EP0ULH04 EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH.5 EP0ULH EP0ULH EP0ULH EP0ULH4 EP0ULH5 EP0ULH EP0ULH8 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 EP0ULH EP0ULH45 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 EP0ULH.5 EP0ULH EP0ULH EP0ULH EP0ULH4 EP0ULH5 EP0ULH EP0ULH8 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 EP0ULH EP0ULH45 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 in.(mm) Series EP ULH 0.7 (8) curve EP0ULH0.5 EP0ULH0 EP0ULH0 EP0ULH0 EP0ULH04 EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH.5 EP0ULH EP0ULH EP0ULH EP0ULH4 EP0ULH5 EP0ULH EP0ULH8 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 EP0ULH EP0ULH45 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 EP0ULH.5 EP0ULH EP0ULH EP0ULH EP0ULH4 EP0ULH5 EP0ULH EP0ULH8 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4 EP0ULH EP0ULH45 EP0ULH EP0ULH4 EP0ULH45 EP0ULH4.7 (70) 0.7 (8) (8) ().7 (44).77 (45).8 (5) 0.4 ().9 (8).77 (45)

7 EP00 ULH (ranch circuit protection) UL Listed 489 S c. No.5-0 EN/IE k 5k 0/Vac UL FILE mpere rating In () 0.5- Reference temperature F/ Terminal capacity flexible/rigid cable Max. Torque N.m/lbs.in E /5 4- WG 4.5/9.8 Rated voltage (V), V 0 V 0 5 V 0 k 0 0 V 0 5 k 0 0 Interrupting ratings, pplication Line protection UL Listed 489 performances Interrupting ratings Standards IE performances UL489, S c. No.5-0 IE 0947-, IE Thermal setting In Rated voltage (V) Weight/pole oz.(g) Terminal capacity flexible/rigid cable (mm) pprovals / Marking 0.5- /45V 4.(0) 0.75/ - 5/5 Short-circuit capacity according to IE () V Icu (k) short-circuit capacity according to IE dd-on devices V 0 5 Icu (k) 5 0 General performance uxiliary contacts Minimum operating voltage Tripping characteristics Rated frequency (Hz) Mechanical/electrical endurance Humidity acc. to IE /-0 Motor operator -- 50/0 0000/ %RH at F/55,, Instantaneous tripping ranges acc. to IE characteristic to 5 times mpere rating characteristic 5 to 0 times mpere rating characteristic 0 to 0 times mpere rating () sk for availability. Under Type approval..5

8 Series EP00 ULH UL489 - Series EP00 ULH - 0k - characteristics --. () P P P Stocked in Mt. Juliet istribution enter. Subject to change. curve EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH50 EP0ULH0 EP0ULH EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH50 EP0ULH0 EP0ULH EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH50 EP0ULH0 EP0ULH curve EP0ULH0.5 EP0ULH0 EP0ULH0 EP0ULH0 EP0ULH04 EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH50 EP0ULH0 EP0ULH EP0ULH0.5 EP0ULH0 EP0ULH0 EP0ULH0 EP0ULH04 EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH50 EP0ULH0 EP0ULH EP0ULH0.5 EP0ULH0 EP0ULH0 EP0ULH0 EP0ULH04 EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH50 EP0ULH0 EP0ULH curve EP0ULH0.5 EP0ULH0 EP0ULH0 EP0ULH0 EP0ULH04 EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH50 EP0ULH0 EP0ULH EP0ULH0.5 EP0ULH0 EP0ULH0 EP0ULH0 EP0ULH04 EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH50 EP0ULH0 EP0ULH EP0ULH0.5 EP0ULH0 EP0ULH0 EP0ULH0 EP0ULH04 EP0ULH05 EP0ULH0 EP0ULH08 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH0 EP0ULH5 EP0ULH0 EP0ULH EP0ULH5 EP0ULH EP0ULH50 EP0ULH0 EP0ULH Pack.

9 EP00 UL (Supplementary protection) 0k 0000 EN/IE k UL077 performances 77/480Vac UL FILE mpere rating () 0.5- Reference temperature F/ Terminal capacity flexible/rigid cable Max. Torque N.m/lbs.in E /5 4- WG 4.5/9.8 Rated voltage (V),,4 pplication V V 50 0 V 77 77/480 0 k V 50 0 k 0 0 Interrupting ratings,,4, Standards Line protection Recognized UL077 S c. No. EN/IE Interrupting ratings UL077 IE 898- IE 947- IE performances pprovals / Marking Thermal setting Rated voltage (V) Weight/pole oz.(g) Terminal capacity flexible/rigid cable (mm) 0.5- /45V 4.4(5) 0.75/ - 5/5 Short-circuit capacity according to IE 0898-,,4 V 0/0 0 Icn (k) 0 0 Short-circuit capacity according to IE dd-on devices,,4 V Icu (k) short-circuit capacity according to IE uxiliary contacts V 0 5 Icu (k) 5 0 General performance Minimum operating voltage Tripping characteristics Rated frequency (Hz) Energy limiting class Mechanical/electrical endurance Humidity acc. to IE /-0 Motor operator -- 50/0 0000/ %RH at F/55,,, 4 Instantaneous tripping ranges acc. to IE characteristic to 5 times mpere rating characteristic 5 to 0 times mpere rating characteristic 0 to 0 times mpere rating.7

10 Series EP00 UL UL077 - Series EP00 UL - 0k - characteristics -- curve curve curve () Pack. P EP0UL0.5 EP0UL0.5 - EP0UL0 EP0UL0 - EP0UL0 EP0UL0 - EP0UL0 EP0UL0 4 - EP0UL04 EP0UL04 5 EP0UL05 EP0UL05 EP0UL05 EP0UL0 EP0UL0 EP0UL EP0UL0 EP0UL0 EP0UL0 EP0UL EP0UL EP0UL 5 EP0UL5 EP0UL5 EP0UL5 EP0UL EP0UL EP0UL 0 EP0UL0 EP0UL0 EP0UL0 5 EP0UL5 EP0UL5 EP0UL5 0 EP0UL0 EP0UL0 EP0UL0 EP0UL EP0UL EP0UL EP0UL EP0UL EP0UL 50 EP0UL50 EP0UL50 EP0UL50 0 EP0UL0 EP0UL0 EP0UL0 EP0UL EP0UL EP0UL P EP0UL0.5 EP0UL0.5 - EP0UL0 EP0UL0 - EP0UL0 EP0UL0 - EP0UL0 EP0UL0 4 - EP0UL04 EP0UL04 5 EP0UL05 EP0UL05 EP0UL05 EP0UL0 EP0UL0 EP0UL EP0UL0 EP0UL0 EP0UL0 EP0UL EP0UL EP0UL 5 EP0UL5 EP0UL5 EP0UL5 EP0UL EP0UL EP0UL 0 EP0UL0 EP0UL0 EP0UL0 5 EP0UL5 EP0UL5 EP0UL5 0 EP0UL0 EP0UL0 EP0UL0 EP0UL EP0UL EP0UL EP0UL EP0UL EP0UL 50 EP0UL50 EP0UL50 EP0UL50 0 EP0UL0 EP0UL0 EP0UL0 EP0UL EP0UL EP0UL P EP0UL0.5 EP0UL EP0UL0 EP0UL0 4 - EP0UL0 EP0UL0 4 - EP0UL0 EP0UL EP0UL04 EP0UL EP0UL05 EP0UL05 EP0UL05 4 EP0UL0 EP0UL0 EP0UL EP0UL0 EP0UL0 EP0UL0 4 EP0UL EP0UL EP0UL 4 5 EP0UL5 EP0UL5 EP0UL5 4 EP0UL EP0UL EP0UL 4 0 EP0UL0 EP0UL0 EP0UL0 4 5 EP0UL5 EP0UL5 EP0UL5 4 0 EP0UL0 EP0UL0 EP0UL0 4 EP0UL EP0UL EP0UL 4 EP0UL EP0UL EP0UL 4 50 EP0UL50 EP0UL50 EP0UL EP0UL0 EP0UL0 EP0UL0 4 EP0UL EP0UL EP0UL 4 4P EP04UL0.5 EP04UL0.5 - EP04UL0 EP04UL0 - EP04UL0 EP04UL0 - EP04UL0 EP04UL0 4 - EP04UL04 EP04UL04 5 EP04UL05 EP04UL05 EP04UL05 EP04UL0 EP04UL0 EP04UL EP04UL0 EP04UL0 EP04UL0 EP04UL EP04UL EP04UL 5 EP04UL5 EP04UL5 EP04UL5 EP04UL EP04UL EP04UL 0 EP04UL0 EP04UL0 EP04UL0 5 EP04UL5 EP04UL5 EP04UL5 0 EP04UL0 EP04UL0 EP04UL0 EP04UL EP04UL EP04UL EP04UL EP04UL EP04UL 50 EP04UL50 EP04UL50 EP04UL50 0 EP04UL0 EP04UL0 EP04UL0 EP04UL EP04UL EP04UL Stocked in Mt. Juliet istribution enter. Subject to change..8

11 pplications Standards UL077 IE 898- IE 947- pprovals / Marking dd-on devices uxiliary contacts EP0 UL (Supplementary protection) Recognized UL077 S c. No.5 EN/IE 0898 EN/IE UL077 performances k 000 0k 77/480Vac UL FILE E59 mpere rating () Reference temperature F/ 77/5 Terminal capacity flexible/rigid cable 4- WG Max. Torque N.m/lbs.in 4.5/9.8 Rated voltage (V) V V 77 50,, Interrupting ratings V k, 77,4 77/480 0, Interrupting ratings V k 50 0 IE performances Thermal setting 0.5- Rated voltage (V) /45V Weight/pole oz.(g) 4.4(5) Terminal capacity flexible/rigid cable (mm ) 0.75/ - 5/5 Short-circuit capacity according to IE V Icn (k) 0/0,,4 0 Short-circuit capacity according to IE V Icu (k) ,, short-circuit capacity according to IE V Icu (k) Line protection Motor operator General performance Minimum operating voltage Ubmin Tripping characteristics -- Rated frequency (Hz) 50/0 Energy limiting class Mechanical/electrical endurance 0000/0000 Humidity acc. to IE /-0 95%RH at F/55,,, 4 Instantaneous tripping ranges acc. to IE characteristic to 5 times mpere rating characteristic 5 to 0 times mpere rating characteristic 0 to 0 times mpere rating.9

12 Series EP0 UL UL077-Series EP0 UL - k - characteristics -- curve curve curve () Pack. P EPUL0.5 EPUL0.5 - EPUL0 EPUL0 - EPUL0 EPUL0 - EPUL0 EPUL0 4 - EPUL04 EPUL04 5 EPUL05 EPUL05 EPUL05 EPUL0 EPUL0 EPUL EPUL0 EPUL0 EPUL0 EPUL EPUL EPUL 5 EPUL5 EPUL5 EPUL5 EPUL EPUL EPUL 0 EPUL0 EPUL0 EPUL0 5 EPUL5 EPUL5 EPUL5 0 EPUL0 EPUL0 EPUL0 EPUL EPUL EPUL EPUL EPUL EPUL 50 EPUL50 EPUL50 EPUL50 0 EPUL0 EPUL0 EPUL0 EPUL EPUL EPUL P EPUL0.5 EPUL0.5 - EPUL0 EPUL0 - EPUL0 EPUL0 - EPUL0 EPUL0 4 - EPUL04 EPUL04 5 EPUL05 EPUL05 EPUL05 EPUL0 EPUL0 EPUL EPUL0 EPUL0 EPUL0 EPUL EPUL EPUL 5 EPUL5 EPUL5 EPUL5 EPUL EPUL EPUL 0 EPUL0 EPUL0 EPUL0 5 EPUL5 EPUL5 EPUL5 0 EPUL0 EPUL0 EPUL0 EPUL EPUL EPUL EPUL EPUL EPUL 50 EPUL50 EPUL50 EPUL50 0 EPUL0 EPUL0 EPUL0 EPUL EPUL EPUL P EPUL0.5 EPUL EPUL0 EPUL0 4 - EPUL0 EPUL0 4 - EPUL0 EPUL EPUL04 EPUL EPUL05 EPUL05 EPUL05 4 EPUL0 EPUL0 EPUL EPUL0 EPUL0 EPUL0 4 EPUL EPUL EPUL 4 5 EPUL5 EPUL5 EPUL5 4 EPUL EPUL EPUL 4 0 EPUL0 EPUL0 EPUL0 4 5 EPUL5 EPUL5 EPUL5 4 0 EPUL0 EPUL0 EPUL0 4 EPUL EPUL EPUL 4 EPUL EPUL EPUL 4 50 EPUL50 EPUL50 EPUL EPUL0 EPUL0 EPUL0 4 EPUL EPUL EPUL 4 4P EP4UL0.5 EP4UL0.5 - EP4UL0 EP4UL0 - EP4UL0 EP4UL0 - EP4UL0 EP4UL0 4 - EP4UL04 EP4UL04 5 EP4UL05 EP4UL05 EP4UL05 EP4UL0 EP4UL0 EP4UL EP4UL0 EP4UL0 EP4UL0 EP4UL EP4UL EP4UL 5 EP4UL5 EP4UL5 EP4UL5 EP4UL EP4UL EP4UL 0 EP4UL0 EP4UL0 EP4UL0 5 EP4UL5 EP4UL5 EP4UL5 0 EP4UL0 EP4UL0 EP4UL0 EP4UL EP4UL EP4UL EP4UL EP4UL EP4UL 50 EP4UL50 EP4UL50 EP4UL50 0 EP4UL0 EP4UL0 EP4UL0 EP4UL EP4UL EP4UL Stocked in Mt. Juliet istribution enter. Subject to change..0

13 IN-rail Ground Fault evices. Series FPUL.4 Series P00

14 IN-rail ground fault protection devices Residual urrent ircuit reakers People protection Series FPUL Recognized UL05 IE 008 Type Vac pplications UL05 performances UL FILE E4809 Maximum voltage (V) Fault current withstand (k) 0 Thermal setting In, 5,, Ground-fault sensing and relaying equipment: Self Powered sensing equipment Standards UL05 EN/IE 008 pprovals / Marking The GFP provides ground fault protection for electrical circuits. It will automatically open the circuit in the case of a ground fault between conductors and ground greater than 0, 0, 00, 00, 500 m, depending on the model. The GFP is available in and 4 ( or 4-wire versions.) The GFP only detects ground fault current. There is no inside thermal and magnetic protection. Therefore, the circuit must be protected upstream by an approved device such us EP00UL, EP00ULH or a fuse. IE/EN performances Thermal setting Residual current IΔ n Rated maximum voltage dd-on devices Minimum operating voltage Umin (), 5,, (m) 0, 0, 00, 00, 500 (V) P: 4P: /45 (V) P: 7() 4P: 90() 0000/ %RH at F/55 Mechanical/electrical endurance Humidity acc. to IE /-0 and IN 04 Terminal capacity flexible/rigid cable - WG Nuisance tripping resistance mbient temperature F( ) uxiliaries (5-50 mm), 4 : 50 8/0μs; Type : up to 04 (-5 up to ) Weight oz.(g) P: 7.7(0) 4P:.58(85) Motor operator () For 0m P and 4P Ub = 75V Short-circuit capacity ccording to IE 008 Making and breaking capacity Residual making and breaking capacity Short-circuit capacity from up to 0000 at 0/0V with fuse 80 gg

15 Series FPUL - Type / /4 5/ N / 4/ /5 N imensional drawings 4P 00 m 00 m 500 m FPUL/00 FPUL5/00 FPUL/00 FPUL/00 FPUL5/00 FPUL/00 FPUL/00 FPUL5/00 FPUL/00 FPUL/00 FPUL5/500 FPUL/500 FPUL/500 0 m 00 m 00 m 500 m In () 5 0 FPUL45/00 FPUL4/00 FPUL4/00 FPUL45/00 FPUL4/00 FPUL4/00 FPUL45/00 FPUL4/00 FPUL4/00 FPUL45/500 FPUL4/500 FPUL4/500 in.(mm).4 ().7 (70).7 (44).8 (7).77 (45) Pack. / / / Pack. / / / Series FPUL P 0/0 m In () ().9 (8).

16 IN-rail ground fault protection devices Residual urrent ircuit reakers with overcurrent protection People protection Series P00 Recognized UL05 EN 009- UL performances UL file Rated/Maximum voltage (V) Fault current withstand E4809 or 77 5k (77V), 0k (V) Pick up current (UL 05) 0.5x rated sensibility Rated current 0,,, 0, 5, Rated frequency 50/0Hz Ground-fault sensing and relaying equipment: Self Powered sensing equipment pplications The ROs P00 UL05 approved in only two module widths offer complete protection against overload, short-circuit and ground fault. They are equipped with a single red/green two-color operating toggle. UL05 EN/IE 009- pprovals / Marking 000 Type Standards 77Vac 5k Vac 0k IE/EN performances Thermal setting Residual current Tripping characteristic Rated voltage Minimum operating voltage Mechanical/electrical endurance Humidity acc. to IE /-0 and IN 04 Terminal capacity flex./rigid cable Top terminal ottom terminal: Nuisance tripping resistance dd-on devices uxiliaries () 0 to (m) 0, 0, 00, 00 (In-5In)- (5In-0In) (V) (V) 00() 0000/ %RH at F/55-4 WG (-5 mm) 4- WG (5-5 mm) +N 50 8/0μs μs - 00kHz mbient temperature F( ) Type : F up to 04 (-5 up to ) Weight oz.(g) 9(50) Motor operator () For 0m Ubmin = 75V Short-circuit capacity.4 ccording to IE 009- Residual making and breaking capacity Short-circuit capacity Energy limiting class at 0V ccording to IE Short-circuit capacity 5000 at 0V

17 0000 Type - characteristic () Neutral right P + N P Type 0000 Type () Type () m P000/00 P00/00 P00/00 P000/00-0 m P000/00 P00/00 P00/00 P000/00 P005/00 P00/00 Pack. / / / / / / 0 m PL000/00 PL00/00 PL00/00 PL000/00-0 m PL000/00 PL00/00 PL00/00 PL000/00 PL005/00 PL00/00 Pack. / / / / / / 0 m PL000/00 PL00/00 PL00/00-0 m PL000/00 PL00/00 PL00/00 PL000/00 PL005/00 PL00/00 - characteristic Neutral left P + N imensional drawings Pack. / / / / / / - characteristic Neutral left P + N PL00-0 m P000/00 P00/00 P00/00 P000/00 P005/00 P00/00 - characteristic Neutral right P + N P00-0 m P000/00 P00/00 P00/00 P000/00 - Series P00 P00 - () Pack. / / / / / / in.(mm).7 (70).7 (44).4 ().50 (89).77 (45). (59) 0.4 ().5

18 ccessories and usbars. UL auxiliary contacts. UL auxiliary contacts.4 UL shunt trip Tele L.5 UL undervoltage release Tele U. usbars and accessories

19 uxiliary switches EN/IE 09 ommon for following modular protection devices: UL077, UL05 devices up to and max. 4 WG, Rs up to 00 and mains disconnect switches type STER (STM). an be coupled on both sides of UL077 devices and on the right side of UL05 devices. Version with golden contacts, available for low current as well as low voltage applications. Stack-on left and right up to 4 units. Permits the pass-through of busbars, pin & fork, top and bottom, just changing the position of the base of the auxiliaries. Performance UL file E59 (UL 077) hange-over contacts (V/) /5 rated voltage/rated current rated voltage/rated current (V/) 0/0.4; 0/; 4/4 Electrical endurance 0000 max. 4 WG (.5 mm) Terminal capacity flexible/ rigid cable Weight oz.(g).47(70) pplications Series Series Functions pprovals The auxiliary contacts are units to be added on to protection devices. They allow information about the protection devices to be monitored from a distance. uxiliary contact H (function H) Provides the status of the protection device, OPEN/LOSE. Signal or auxiliary contact S/H, S/H G (function S/H) This auxiliary can act as an auxiliary contact (function H) or as a signal contact (function S). The user can change the function at the moment of installation. Used as signal contact (function S) it provides the information about the automatic tripping of the protection devices: overload or short-circuit for Ms, earth leakage tripping for Rs. The device has a test button on the front to simulate the function (acting as a function H or S) Reset button for the contacts (function S) Tripping signal on the front (function S) oupling usbar pass-through Stack-on Series / mod. H Function H S/H S/H at. No H S/H S/HG Pack. golden contacts S Stocked in Mt. Juliet istribution enter. Subject to change..

20 uxiliary switches dd-on devices and busbars pplications pprovals oupling right Series ommon for UL077 and UL05 modular devices up to and max. 4 WG. an be coupled on both sides of UL077 devices and on the right side of UL05 devices. This device has change-over contacts, the upper one with changeable function (S/H). Two versions: SH/HH-R to be coupled on the right side of the protection devices, SH/HH-L when assembled on the left side No stack-on possibilities (only auxiliary) No busbar pass-through facilities Performance UL file E59 (UL 077) hange-over contacts rated voltage/rated current (V/) /5 rated voltage/rated current (V/) 0/0.4; 0/; 4/4 Electrical endurance 0000 Terminal capacity flexible/rigid cable WG(mm ) 8-4(.5) Weight oz.(g).8(80) Functions EN/IE 09 ottom auxiliary contact (function H) Provides the status of the protection device, OPEN/LOSE. Top signal or auxiliary contact (function S/H). This auxiliary can act as an auxiliary contact (function H) or as a signal contact (function S) The user can make the function change at the moment of installation. Used as signal contact function (function S) it provides information about automatic tripping of the protection devices: overload or short-circuit for UL077 devices, earth leakage tripping for UL05 devices. The device has a test button on the front to simulate the function (acting as a function H or S) Reset button for the contacts (function S) Tripping signal on the front (function S) oupling left Series Function at. No Pack. / mod. SH/HH SH/HH-R () SH/HH SH/HH-L () () R= coupling on the right () L= coupling on the left H S.

21 uxiliary switches pplications pprovals EN/IE oupling usbar pass-through Shunt trip Tele L ommon device for all modular protection devices. an be coupled on both sides of UL077 devices and on the right side of UL05 modular devices. Permits the pass-through of busbars, pin & fork, at top or bottom terminals. Stack-on left and right side up to 4 modules. Performance The Tele L allows remote switch off of any UL077 or UL05 modular device by means of push-buttons or any other automatic management processor. built-in contact in series with the coil prevents burn- out damage if the voltage remains. UL file E59 (UL 077) Rated voltage (V) 0/45, 0/5 (V) 4/0, 4/48 Tripping time (ms) <0 Electrical endurance 0000 Terminal capacity flexible/ rigid cable WG(mm ) 8-4(.5) Weight oz.(g) 4.4(5) Inrush current (Tele ) at 0V 0.4 at 0V 0.9 at 45V.5 Tele L - Shunt trip Voltage Pack. P 4-0V mod. 4-48V TELEL- 0-45V 0-5V TELEL- Shunt trip Tele L Stocked in Mt. Juliet istribution enter. Subject to change. Stack-on imensional drawings in.(mm) 0.7 (8).7 (70).7 (44).77 (45).9 (8). (59) 0.4 ().4

22 uxiliary switches dd-on devices and busbars pplications Undervoltage release Tele U The Tele U releases the main UL077 and UL05 modular devices in case the power supply drops below 0.5x rated voltage. Time delay adjusting up to 00 ms. Performance Rated voltage (V) Rated voltage / (V), 4, 48 / Tripping voltage (V) 0.5xUn±0% Resetting voltage (V) >0.5xUn±0% Tripping time (ms) djustable 0 00 Electrical endurance 000 Terminal capacity flexible/rigid cable WG(mm ) 8-4(.5) Weight oz.(g) 4.4(5) pprovals EN/IE () Tele U - Undervoltage release Voltage Pack. P V TELEU-0 mod. / V TELEU- / 4V TELEU-4 / 48V TELEU-48 oupling usbar pass-through imensional drawings 0.7 (8) in.(mm).7 (70).7 (44) Stack-on.77 (45).9 (8) () sk for availability. Under Type approval.. (59) 0.4 ().5

23 For Ms For Ms For Ms For Ms For Ms For 4 Ms Max. Voltage 00 Vac 00 Vac 00 Vac 00 Vac 00 Vac 00 Vac Modules PIN spacing() module module module module module 4 module SPULL00/0 SPULL00/ SPULL00/0 SPULL00/ SPULL00/0 SPULL00/ Pack /00 /50 /00 /50 /00 /50 IcapUL SUL Pack 0/0 /0 SPULR77/ SPULR480/ SPULR480/ Pack /50 /50 /50 usbars accessories according to UL489 for use with EP00ULH() Tooth cap Pin connector usbars to UL077 for use with EP00UL, FP and P Rs and ROs For Ms For Ms For 4 Ms Voltage 480Y/77 480Y/77 480Y/77 Modules PIN spacing() module module module dd-on-devices busbars usbars according to UL489 for use with EP00ULH() () Fixed lengths, can t be cut () module width = 0.7in.(8mm) usbars accessories according to UL077 Tooth cap Pin connector IcapUL SUL Pack 5/0 /0 ccessories for Ms Walls for terminals WUL Pack. 0 llows padlocking in ON and OFF position KS Pack. Padlocking bracket.

24 IN-rail Surge rresters and Net nalyzers. IN-rail Surge rrester features and benefits. Product selection - SP range.5 Energy Management introduction. ompact three-phase analyzer - MTIN.8 Three-phase power analyzer - MT44

25 The SP IN-rail SPs utilize fast acting metal oxide varistor (MOV) technology to limit overvoltage to values compatible with the sensitive equipment connected to the network. End of life indicator This feature is standard on all SP range pluggable IN-rail surge protectors. 4 Each cartridge is equipped with a mechanical indicator which is green when the SP is operational and protecting the system, and turns red when it has reached end of life. When this occurs, the cartridge must be replaced to guarantee protection. Remote indication ry contacts, optional in all ranges, for remote indication of protector end of life. t Equipment protection and Energy management Features & benefits New, optimized disconnection system GE has developed an optimized disconnection system for end of life. omplies with the disconnection tests of the standards for protectors for photovoltaic applications. Protector lifetime Status indication lear display of protection End of life iconnect connection Two types of terminals: for rigid or flexible cable and for fork type comb busbar. artridge security system Vibration-proof insertion click effect. Reversible installation Reversible chassis to allow cable entry from above or below. Mechanical cartridge coding Safety system to avoid possible cartridge replacement errors..

26 Surge arresters - lass II- SP Line UL449 rd Edition In () Imax Service voltage MOV Uc uxiliary contact No. of modules () Pack. P devices 0 0V 75 no SPII75 () 0 V 75 no SPII V 0 no SPII0 0 0V 75 yes SPII75 () 0 V 75 yes SPII V 0 yes SPII0 Features and benefits In () Imax Service voltage MOV Uc uxiliary contact No. of modules () Pack. Single phase system 0 0V single phase 75 no SPII75 () 0 V single phase 0 no SPII0 0 77V single phase 0 no SPII0 0 0V single phase 75 yes SPII75 () 0 V single phase 0 yes SPII0 0 77V single phase 0 yes SPII0 In () Imax Service voltage MOV Uc uxiliary contact No. of modules () Pack. Split phase system 0 V/0V split phase 75 no SPII75 () 0 480V/V split phase 0 no SPII0 0 V/0V split phase 75 yes SPII75 () 0 480V/V split phase 0 yes SPII0 In () Imax Service voltage MOV Uc uxiliary contact No. of modules () Pack. elta system 0 V elta 0 no SPII V elta 750V yes SPII V elta 0 yes SPII V elta 750 yes SPII0750 In () Imax Service voltage MOV Uc uxiliary contact No. of modules () Pack. HL System 0 V/0V High Leg elta 0 no 4 SP4II0 Wye System 0 V/0V High Leg elta 0 yes 4 SP4II Y/77V Wye system 0 no 4 SP4II Y/77V Wye system 0 yes 4 SP4II0 0 08Y/0V Wye System 75 no 4 SP4II75 () 0 08Y/0V Wye System 75 yes 4 SP4II75 () Pluggable cartridges In () Imax MOV Uc artridges replacement In Pack SPII75; SPII75; SPII75; SMII75 () SPII75; SPII75; SPII75; SP4II75; SP4II SPII75; SPII75 SMII SPII0; SPII0; SPII0; SMII0 SPII0; SPII0; SPII0; SP4II SPII0750; SPII0750 SMII0750 () mod. = 0.7in.(8mm) () sk for availability. Under Type approval..

27 UL449 rd edition, IN-rail SPV is the series of devices that provide advanced overvoltage protection to photovoltaic systems by utilizing GE s optimized dynamic thermal disconnection system, which does not require additional overcurrent protection (back-up fuse) due to its high short-circuit withstand rating. These surge protective devices are suitable for all PV applications: large-scale, rooftop and self-consumption (off-grid) installations. Ratings and features Maximum discharge current (8/0μs): k Nominal discharge current (8/0μs): 0k (0k for 500V ) Ucpv: 0, 00 Vdc and 500V Iscpv: 0k (EN-5059-), no back-up fuse required SR: 50k, 5k, 00k (UL449 rd edition) IN-rail mountable, plug-in format Visual and remote end of life indicators Equipment protection and Energy management SPs for photovoltaic application Surge arresters - lass II- SPV Line UL449 rd Edition In (k) Imax Photovoltaic 0 application Service voltage uxiliary No. of // PV MOV Uc Up (Ures) contact modules() 00 PV no 00 PV yes 000 PV no 000 PV yes 500 PV no 500 PV yes SPVII/00 SPVII/00 SPVII/000 SPVII/000 SPVII/500 SPVII/500 Pack. () mod. = 0.7in.(8mm) Pluggable cartridges Service voltage In (k) Imax // PV 0 00 PV PV PV To be replaced in SPVII/00 SPVII/00 SPVII/000 SPVII/000 SPVII/500 SPVII/500 SMII/00PV SMII/000PV SMII/500PV Pack. Installation of SP SPs on photovoltaic networks onverter /.4

28 Energy management What is electrical energy efficiency? Energy management Electrical energy efficiency is understood as the reduction in power and energy demands from the electrical system without affecting the normal activities carried out in buildings, industrial plants or any other transformation process. dditionally, an energy efficient electrical installation allows the economical and technical optimization. That is, the reduction of technical and economical costs of operation. In short, a study on energy savings and efficiency will involve three basic points: Support the sustainability of the system and the environment by reducing greenhouse emissions as a result of reducing the energy demand. Improving the technical management of the installations by increasing its efficiency and avoiding stoppages and breakdowns. Reduction of energy costs as well as the operating costs of the installations. From a technical point of view, four basic points are considered in order to have a more efficient electrical installation. ontract optimizing Measurement systems emand management Productivity improvement by controlling perturbances and costs. () () MT9 only available under EN/IE standards.5

29 ompact three-phase analyzer IE 4, VE 00, UL94, IE 80, IE 48, IE 57-, EN 000--, EN 000--, EN 00- escription Three-phase power analyzer (balanced and unbalanced) for mounting on IN-rail. lso adaptable for panel mounting with.8 in. x.8 in. (7 x 7mm) dimension. Energy management UL listed, MT IN-rail and panel adaptor Features Key features urrent measuring.../5 or.../ IN-rail format with only modules (5mm). ssembly on the 7 x 7mm panel with frontal adaptor (Ref. No. 544). RS485 communications (Modbus-RTU). T wo transistor outputs. O ptional ITF technology: galvanic insulation for inputs. I nstantaneous display of important electrical parameters. Sealable V ery small dimension M easuring in 4 quadrants. pplications ontrol switchboards for low and medium voltage applications where IN-rail mounting is preferred due to size restraints. llows the measurement of electrical variables utilized for the effective control of systems. UL FILE: E577 Power supply circuit onsumption Frequency Nominal current (In) METERING IRUIT Maximum voltage Frequency Voltage consumption of the circuit urrent consumption of the circuit Nominal current Permanent overload LSS/URY Voltage urrent Power rating MIENT ONITIONS Operating temperature Relative humidity (non-condensing) Output transistor Max. operating voltage Max. operating current Max. impulse frequency uration of the impulse HOUSING Type of box egree of protection imensions (H x W x ) Weight Safety 0V (-5% to +0%) or 85 to 5V / 95 to 00V V 50 or 0Hz 5 00V (Ph-N) / 50V (Ph-Ph) 45 to 5Hz 0.7V 0.9V (ITF) /0.75V (shunt) In / 5. In 0.5% ± digit 0.5% ± digit % ± digit 4 F up to F (-0 up to +50 ) 5% up to 95% Opto-isolated (open collector) NPN 4V 50m 5 impulse / s 00 ms VO self-extinguishing plastic Embedded equipment: IP4 Terminals: IP0.5 x. x.7 in. (85 x 5.5 x 7.9mm) ( modules) 7.4 oz (0 g) esigned for T III 00/50V installations, in accordance with EN 00. lass II double insulated for protection against electric shock.

30 ompact three-phase analyzer UL listed compact three-phase power analyzer - Series MTIN Mod. lass ommuni- Protocol (V, ) cation RS485 RS485 Modus/RTU Modus/RTU Output Voltage 85 to 5V 95 to 00V 0V 0V 85 to 5V 95 to 00V Pack MTIN MTIN MTINOM MTINHROM Pack MTdapt ccessories escription Front panel adaptor daptor installing MTIN on 7 x 7mm panels. entral fixing. djustable on the rear with two straps onnections or 4 wires (low voltage) wires ( voltage transformers and current transformers) wires ( voltage transformers and current transformers) imensional drawings.7 in.(mm)

31 Three-phase power analyzer and power quality EM: IE , IE , IE , IE , IE Listed for industrial control equipment miscellaneous device. pplications ontrol switchboards for low and medium voltage applications. larm center by means of voltage-free digital inputs. Submetering: can measure through impulses other types of consumption, such as gas, water, steam, etc. via their digital inputs. Measurement converters: possible to associate instantaneous parameter to one of the analog outputs (0 to 0m / 4 to 0m). Energy management UL listed, MT 44 oor mounted network analyzer Recording of instantaneous, maximum, and minimum parameters with a Key features date and hour by means of an expandable memory card. lass 0. energy and power precision. lass power quality analyzer. O ne display can monitor up to measurement modules. urrent measuring.../5 or.../ Measure of neutral current with transformer. O ptional energy consumption and generation billing (up to 9 rates). Expansion possibilities (up to modules). R S485 Modbus/RTU communications. P rofibus GS module available. S memory module with max capacity of G available. acklit VG graphical display. I nstantaneous display of maximum and minimum electrical parameters with date and hour. M easure of energy consumed and generated, up to 00 GWh. Up to 8 digital inputs and outputs available. ITF technology: galvanic insulation for inputs. pprovals / Marking Power quality analyzer: harmonic decomposition up to order 50, asymmetries, flicker, unbalances, overvoltages, gaps, interruptions, etc. escription Three-phase advanced power analyzer for panel mounting with a 5.7 in. x 5.7 in. (44 x 44 mm) front dimension. Features UL FILE E577 Power supply circuit 85 to 5V and 95 to 00V power supply frequency 50/0Hz pow. supp. consumption V pow. supp. consumption < 5W METERING IRUIT Voltage 5 to 0V (L-N) to 00V (L-L) Frequency 45 to 5Hz Metering margin 5 to 0% Un dmissible overvoltage 750V Voltage consumption of the circuit < 0.5V URRENT MESURING IRUIT Nominal current (In) 5 or Metering range to 0% of In Primary current metered Programmable < 0000 dmissible overload permanent, 00 t < s urrent consumption of < 0.45V the circuit Maximum meter value 00GWh lass/ccuracy 0. or 0.5 power and energy MIENT ONITIONS Operating temperature 4 F up to F (-0 up to +50 ) Relative humidity 5% up to 95% HOUSING Metering module ssembly on IN-rail 477 (EN 500) ssembly on panel.8 in. x.8 in., 5.7 in. x Screen or screen + metering module 5.7in. (9 x 9mm, 44 x 44mm) or opening with a 4.in. (0mm) Ø imensions (H x W x ) 5.7 in. x 5.7 in. x 4. in. (44 x 44 x mm) Safety esigned for T III 00/50V installations, in accordance with EN 00. lass II double insulated for protection against electric shock.8

32 ompact units (metering + display module) - Series MT44 Quadrants lass (V, ) ommunication Protocol Neutral current Universal power supply Harmonics 4 0. RS485 Modus/RTU Yes 85 to 5V 95 to 00V U and I (50%) MT44UM Measuring units (measuring module and display sold separately) - Series MT44 Quadrants lass (V, ) ommunication Protocol Neutral current Universal power supply Harmonics 4 0. RS485 Modus/RTU Yes - Yes U and I (50%) - MT44UM - 85 to 5V 95 to 00V - Series MT44 Measuring module VG display 4 For other versions, contact GE or your local distributor. imensional drawings MT44U in.(mm) Fig. Fig. Holes guide Fig. Lock points Figure above illustrates how the front display mounts on the panel either with a. in. x. in. (9 x 9mm) square cutout or a circular cutout with a diameter of 4. in. (0mm). View is the rear of the display module. Exchangeable cards 8I/8O digital expansion card Profius expansion card GS modules MT8I80 MTPUS 8 digital inputs and 8 digital outputs. Outputs with opto-coupled transistor. 8I/4O analog expansion card Ethernet and S memory card MT8I MTMUS 8 analog inputs and 4 analog outputs Ethernet communications card and S memory. 8I/4O digital expansion card S memory expansion card MT8IR MTSMEM 8 digital inputs and 4 digital outputs. Outputs with relay. ommon accessories for MTIN, MT9 and MT44 - onverters onverter for RS/485 to Ethernet (and vice-versa) MT485Enet US converter to RS or RS485 Power supply V / V. Ethernet speed: 0/00 asetx RS us transmission speed: 00 bps to 500 bps..9 MTUS485 onverter from US network protocol to RS or RS485. Power supply through the P's US port. Transmission speed: 4800 to 8000 bps.

33 GE Industrial Solutions 4 Woodford venue Plainville, T *Indicates a trademark of the General Electric ompany and/or its affiliates. ll other brands or names are property of their respective holders. Information provided is subject to change without notice. Please verify all details with GE. ll values are design or typical values when measured under laboratory conditions, and GE makes no warranty or guarantee, express or implied, that such performance will be obtained under end-use conditions. 0, General Electric ompany and/or its affiliates. ll rights reserved. ET-87