DDF4920HDV-DN Commissioning

Transcription

1 DDF4920HDV-DN IM English / /

2 DDF4920HDV-DN-IM Information about Copyright, Trademarks, Design Patents 2016 Dallmeier electronic The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express authorization is prohibited. Offenders will be held liable for the payment of damages. All rights reserved in the event of the grant of a patent, utility model or design. We reserve the right to make technical modifications. The manufacturer accepts no liability for damage to property or pecuniary damages arising due to minor defects of the product or documentation, e.g. print or spelling errors, and for those not caused by intention or gross negligence of the manufacturer. All trademarks identified by are registered trademarks of Dallmeier electronic. All trademarks identified by *) are trademarks or registered trademarks of the following owners: Adobe and Flash of Adobe Systems Incorporated headquartered in San José, California, USA; AMD and AMD Athlon of Advanced Micro Devices, Inc. headquartered in Sunnyvale, California, USA; Intel and Pentium or Intel Pentium of Intel Corporation headquartered in Santa Clara, California, USA; JavaScript of Oracle Corporation (and/or its affiliates) headquartered in Redwood Shores, California, USA; Microsoft, ActiveX, DirectX, Internet Explorer, Windows and Windows Vista of Microsoft Corporation headquartered in Redmond, Washington, USA; SD and SDHC of SD-3C, LLC headquartered in North Hollywood, California, USA. Third-party trademarks are named for information purposes only. Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identification of third-party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is no reason to assume that the respective trademark is unprotected. 2

3 DDF4920HDV-DN-IM Table of Contents 1 Validity 4 2 Documents 4 Data Sheet 4 4 Configuration 4 3 Typographical Conventions 5 4 Safety Instructions 7 5 General Notes 10 Scope of Delivery 10 Transportation and Packaging 10 Warranty 11 Approvals/Certifications 11 Appropriate Use 11 6 Requirements 12 General 12 Operation 12 7 Maintenance 14 8 Installation and 15 9 Pin Assignment Connection and Login 38 Connection 40 Login Technical Specifications

4 DDF4920HDV-DN-IM 1 Validity This document applies to the following device: DDF4920HDV-DN-IM (in-ceiling mount variant) Figures in this document may differ from the actual product. 2 Documents Data Sheet The document Data sheet contains detailed technical specifications and features of the device. The target audience is trained system integrators. The document (this document) contains detailed descriptions on installation, connection and commissioning of the device as well as safety instructions and general notes. The target audience is trained system integrators. Configuration The document Configuration contains detailed descriptions on the configuration of the device. The target audience is trained system integrators. 4

5 DDF4920HDV-DN-IM 3 Typographical Conventions This document may contain various warning words and symbols that indicate potential sources of danger: DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE NOTICE is used to address practices not related to physical injury. 5

6 DDF4920HDV-DN-IM For reasons of clarity and readability, various text formatting elements and types of emphasis are used in this documentation: Instructions are indicated by arrows ( ): Carry out instructions one after the other in the sequence described. Expressions in bold/italics generally indicate a control element on the device (switches or labels) or on its user interface (buttons, menu items). Paragraphs in italics provide information on basic principles, special features and efficient procedure as well as general recommendations. 6

7 DDF4920HDV-DN-IM 4 Safety Instructions Only use the device if it is technically in proper working condition and for the intended purpose while keeping safety and potential dangers in mind. Qualified Personnel The installation, mounting, connection, commissioning and configuration of the device may only be carried out by qualified personnel. This also applies to the maintenance, testing and repair, whereat the regulations of the DIN VDE 0701 series of standards (repair, modification and inspection of electrical appliances) must be followed. Regulations The use of video and audio surveillance systems is, in general, strictly regulated. Inform yourself about the currently valid laws and regulations regarding data, worker and environmental protection before using the device and ensure compliance with them. System Components Only use internal components that have been tested and approved by Dallmeier. Inappropriate internal components may cause malfunctions, damages and data loss and may result in the loss of warranty. Modifications Do not make any modifications to the hardware or software that have not been tested and approved by Dallmeier. Inappropriate modifications may cause malfunctions, damages and data loss and may result in the loss of warranty. 7

8 DDF4920HDV-DN-IM Documentation Read the documents included in the delivery carefully and thoroughly. Always observe the contained instructions, notes and warnings. The product documentation contains several documents which are included in the delivery in printed form and/or on a digital medium. Store all documents in legible condition in a suitable location in order to provide for later consultation. Condensation Water If the device is brought from a cold to a warm environment, resulting condensation water may cause malfunctions and damages. In this case, wait (up to 8 hours) until the device has reached room temperature before commissioning. Earthing & Equipotential Bonding For the safety of persons (protection against dangerous contact voltages) and devices (protection against over-voltages) and the immunity of information and communication technology equipment to electromagnetic interferences (EMI), all protective measures, which are specified by the currently valid DIN, VDE and ISO standards and which provide for a standard-compliant earthing and a correct equipotential bonding of electrical and electronic devices, are mandatory and must be fulfilled by all means. Lightning Storms To avoid damage to the device by electrical surge during lightning storms, unplug the device from the mains power supply (pull out the power plug). This is also recommended, when the device has been unused for a long period of time. 8

9 DDF4920HDV-DN-IM Operating Conditions Unfavourable operating conditions may shorten the life of the device and may cause malfunctions, damages and data loss and may result in the loss of warranty. Observe the specifications given in the technical data, the operating condition requirements and the maintenance instructions. Foreign Bodies If objects or liquids get into the device, immediately disconnect it from the power supply (pull out the power plug). Contact the sales partner responsible for your area. Burnt Smell If you notice burnt smell or a formation of smoke coming from the device, immediately disconnect it from the power supply (pull out the power plug). Contact the sales partner responsible for your area. Opening The device may only be opened by qualified personnel for commissioning, inspection, maintenance and repair. Disposal Do not dispose waste electrical and electronic equipment into the household trash. Disconnect the device from the power supply. Remove all connected devices. Return the device to your respective sales partner. 9

10 DDF4920HDV-DN-IM 5 General Notes Scope of Delivery Included in the standard scope of delivery is: 1 Documentation Configuration (published on DVD-ROM) 1 Documentation (published in print and on DVD-ROM) In addition, all screws and dowels necessary for a proper installation are included. The scope of delivery may differ depending on the ordered equipment, device variant or country of destination. The functional range of the device depends on the ordered equipment or device variant and may differ from this document s content. Certain functions and features may require the purchase of an additional license. Transportation and Packaging Store the original packaging for later transportation. Dallmeier is not responsible for any damage resulting from unprofessional/improper transportation. The device should only be shipped in the original packaging. If the original packaging is no longer available, ensure that the packaging used sufficiently protects the device against damage, moisture, heat and cold. 10

11 DDF4920HDV-DN-IM Warranty The terms and conditions valid at time the contract was signed shall apply. Approvals/Certifications The following approvals/certifications were valid for the device at the time of this document s compilation: CE, FCC, ACA, UVV Kassen (DGUV Test), UL, DIN compliant Visit for possible updates. Appropriate Use The DDF4920HDV-DN-IM (in-ceiling mount variant) is a 5-megapixel HD network camera built into a vandal-resistant (IK10) dome enclosure. It is exclusively designed for indoor installations in suspended ceilings or drywall (plasterboard) systems and can be powered via PoE (Power over Ethernet, Class 0, IEEE 802.3af) or supplied with 12 V DC (separate power supply unit required). NOTICE The DDF4920HDV-DN-IM is exclusively designed for indoor installations. An outdoor installation is prohibited and may result in malfunction, damage, data loss and loss of warranty. 11

12 DDF4920HDV-DN-IM 6 Requirements General Unfavourable local conditions may shorten the life of the product and may cause malfunctions or damages. Do not install/operate the device in places with a large amount of dust and dirt, with steam or oil vapours (e.g. kitchen), with direct sunlight, with strong heat emissions (e.g. radiator), with improper ambient temperatures, near sources with strong radiation (e.g. radio transmitters, magnetic fields), with corrosive surroundings (e.g. gases, salt water), with insufficient air ventilation (e.g. closed cabinet). Operation Observe the following notes for the operation of the device: The device can be powered via PoE (Power over Ethernet, Class 0, IEEE 802.3af) or supplied with a separate 12 V DC power supply unit. However, always beware not to use both power sources simultaneously. Always ensure the correct polarity when using a separate 12 V DC power supply unit. 12

13 DDF4920HDV-DN-IM Always disconnect the separate 12 V DC power supply unit from the mains socket (pull out the power plug) before connecting or disconnecting the device. In order to comply with UL s requirements, always use a UL-certified, Limited Power Source (LPS) Class 2 power supply unit when operating the device with a separate 12 V DC power supply unit. When using a separate 12 V DC power supply unit, interference caused by a ground loop may occur in the analog video signal. In this case, use a video signal transformer (balun) for galvanic (ground) isolation between the signal source (camera) and the RG-59 cable. If the device or the cables connected to the device are located near sources with strong radiation, the video image may be distorted. The device is equipped with automatic gain control (AGC). In low light conditions the image may be altered (e.g. noise). However, this is not a camera malfunction. The quality of the video image depends on the lighting conditions and the used monitor. The accuracy of the automatic white balance (AWB) algorithm depends on the used lighting. Mixed light (consisting of artificial light and daylight) may cause color distortions (inaccurate color reproduction). Poor lighting can lead to an incorrect white balance. 13

14 DDF4920HDV-DN-IM 7 Maintenance The device may only be opened by qualified personnel for commissioning, inspection, maintenance and repair. Cleaning If it is necessary to clean the device, observe the following notes: NOTICE Damage to the surface of the device Clean the housing (outside) with a soft, dry and antistatic cloth. Do not use detergents. Clean the plastic bubble with water and some dishwashing agent using a soft, non-linting cloth or sponge. Do not rub the plastic bubble with a dry cloth. Do not use common glass cleaners. Avoid excessive rubbing. Dry gently with a clean dry cloth to avoid scratching the surface. 14

15 DDF4920HDV-DN-IM 8 Installation and The installation and commissioning of the device may only be carried out by qualified personnel. WARNING Falling device/objects or collapsing ceiling Danger of death or serious injury to the head Observe the manufacturer s instructions about the maximum adequate carrying capacity of the supporting structure and the suspended ceiling or ceiling panel. Use screws suitable for the ceiling/wall material. Use the correct type of anchor for your ceiling/wall type: Plastic screw anchors for solid wall material (concrete/brick) Toggle bolt style anchors for drywall / hollow wall type (plaster) Electric shock hazard Danger of death or serious injury Always disconnect the PoE switch or the separate power supply unit from the mains socket (pull out the power plug) before connecting or disconnecting the device. 15

16 DDF4920HDV-DN-IM NOTICE Damage to the device resulting from improper power supply The device can be powered via Power over Ethernet (PoE, Class 0, IEEE 802.3af) or supplied with a separate 12 V DC power supply unit. However, always beware not to use both power sources simultaneously. In order to comply with UL s requirements, always use a UL-certified, Limited Power Source (LPS) Class 2 power supply unit when operating the device with a separate 12 V DC power supply unit. You need: Drywall utility saw or jigsaw M6 eye bolt Torx screwdriver with hollow point (T20 H) for tamper-resistant 6-lobe security screw with pin (Torx-TR 20) Ceiling hook, safety wire and carabiner Phillips screwdriver PG16 cable gland 16

17 DDF4920HDV-DN-IM ❶ a Torx screwdriver (T20 H) a 17

18 DDF4920HDV-DN-IM a 3 Tamper-resistant torx screw (Torx-TR 20) a Loosen the three tamper-resistant torx screws (Torx-TR 20) of the cover ring with a torx screwdriver (T20 H). 18

19 DDF4920HDV-DN-IM ❷ Remove the cover ring/bubble. 19

20 DDF4920HDV-DN-IM ❸ a a M6 eye bolt b Ceiling clamp (2 ) b Screw the M6 eye bolt onto the bottom side of the housing. 20

21 DDF4920HDV-DN-IM ❹ a Ø 143 mm b Ceiling hook b a Cut a circular hole (Ø 143 mm) into the suspended ceiling or ceiling panel. Screw a ceiling hook into the supporting structure. 21

22 DDF4920HDV-DN-IM ❺ a a Basic position of ceiling clamp Insert the housing into the circular cut-out. 22

23 DDF4920HDV-DN-IM ❻ b a a Carabiner b Safety wire Attach a safety wire to the M6 eye bolt (use a carabiner) and the ceiling hook. 23

24 DDF4920HDV-DN-IM ❼ a a M4 locking screw (ceiling clamp) b Phillips screwdriver b 24

25 DDF4920HDV-DN-IM Locked ceiling clamp (2 ) Tighten the M4 locking screw of both ceiling clamps with a Phillips screwdriver until the housing is securely fixed. 25

26 DDF4920HDV-DN-IM ❽ a PG16 cable gland a Run the required cables through a PG16 cable gland and screw the PG16 cable gland in the appropriate thread on the bottom side of the housing. 26

27 DDF4920HDV-DN-IM 27

28 DDF4920HDV-DN-IM ❾ a h g b c d e f Connect the required cables to the connectors of the camera module. 28

29 DDF4920HDV-DN-IM a Analog video output (BNC, CVBS) b DC auto iris interface c LAN LED d Audio OUT / Microphone IN (3.5 mm phone jack) e LAN / PoE (RJ45 jack, PoE conformity IEEE 802.3af) f Power LED g 12 V DC Power IN (Weidmüller male connector SL 3.50/02/90G) h Flexible cable fastener (2 ) You can disable the LAN LED signal in the WebConfig user interface of the camera. For more information and detailed descriptions of the possible LAN LED states, read the documentation on camera configuration. 29

30 DDF4920HDV-DN-IM ❿ a a SD*) /SDHC *) card Min. 1 GB recommended Max. 32 GB supported 30

31 DDF4920HDV-DN-IM ⓫ a Knurled locking screw Rotation (2 ) Tilt ±90 Pan ±90 Rotation ±180 a 31

32 DDF4920HDV-DN-IM ⓬ a b a Ambient light sensor attached to adjustable foam ring b Locking screw (focal length) 32

33 DDF4920HDV-DN-IM a Locking screw (focus) a Remote Back Focus Control The camera is equipped with the Remote Back Focus Control function. After the manual focus setting on the lens, a convenient and precise fine adjustment of the focus can be made over the network in the WebConfig user interface of the camera (more information and important notes can be found in the documentation on camera configuration). 33

34 DDF4920HDV-DN-IM ⓭ a Black inner dome cover a Attach the cover ring to the housing while ensuring that the ambient light sensor is not covered by the black inner dome cover. 34

35 DDF4920HDV-DN-IM Tighten the three tamper-resistant torx screws (Torx-TR 20) of the cover ring with a torx screwdriver (T20 H). 35

36 DDF4920HDV-DN-IM 9 Pin Assignment Tip Ring Sleeve Audio OUT / Microphone IN (3.5 mm phone jack, for stereo plug) Audio OUT (mono) Microphone IN (mono) Tip Signal Not used Ring Not used Signal Sleeve Ground Ground NOTICE For a clean (interference-free) audio signal transmission, the Audio IN/OUT Y-Cable Connector FGA-30 is required (optionally available). 36

37 DDF4920HDV-DN-IM 12 V DC (+) 12 V DC ( ) 12 V DC Power IN (Weidmüller male connector SL 3.50/02/90G) DC auto iris interface DC auto iris Pin No. Function 1 Control 2 Control + 3 Drive + 4 Drive 37

38 DDF4920HDV-DN-IM 10 Connection and Login The configuration of the device is carried out with a PC/web browser via the local area network (LAN). Alternatively, the PC can be directly connected to the device via an Ethernet crossover cable. Minimum System Requirements Operating system (OS) Microsoft *) Windows *) XP Windows Vista *) Windows 7 (each with latest service pack) Processor (CPU) 3 GHz Intel *) Pentium *) 4 AMD *) Athlon *) or faster (or equivalent) Random access memory (RAM) Graphics card Sound Ethernet 1 GB (Windows XP) 2 GB (Windows Vista, Windows 7) DirectX *) 9.0 or 10.0 compatible 64 MB of graphics memory (128 MB or higher recommended) Sound card or on-board sound chip (min. 16 bit) 100 Mbps 38

39 DDF4920HDV-DN-IM Minimum System Requirements Web browser Software Microsoft Internet Explorer *) (latest version) Adobe *) Flash *) Player (latest version) JavaScript *) enabled Microsoft ActiveX *) enabled Dallmeier Live Video ActiveX (latest version) Note that a more powerful PC is required if several devices are configured with live video display (and/or live audio output) simultaneously. a DirectX compatible graphics card and the Dallmeier Live Video ActiveX are not required for the configuration without live video display or live audio output. the latest Dallmeier Live Video ActiveX can be directly downloaded from the device or from the latest Dallmeier Live Video ActiveX can be automatically downloaded from the Internet after the connection to the device is established (only with Microsoft Internet Explorer and if it is not already installed). the configuration without live video display and without live audio output can theoretically be carried out with any operating system and web browser. However, the configuration always requires the Adobe Flash Player. 39

40 DDF4920HDV-DN-IM Connection The factory default IP address of the device is Ensure that the PC/web browser can establish a connection to the device via Ethernet. Start the web browser. Enter the IP address of the device into the address bar of the web browser. Confirm the input. The connection to the device is established. The graphical user interface (GUI) of the live mode is displayed. 40

41 DDF4920HDV-DN-IM Login The graphical user interface of the configuration mode is displayed for authorized users only. The factory default admin password is 3. NOTICE Risk of misuse by unauthorized users Change the factory default admin password as soon as possible. Click CONFIG in the user interface of the live mode. The login dialogue is displayed. Enter the Username (Default: admin ) if required. Enter the Password (Default: 3 ). Confirm with OK. The graphical user interface of the configuration mode is displayed. Configure the required settings and finally click LOGOUT. 41

42 DDF4920HDV-DN-IM 11 Technical Specifications Specifications Sensor 1/2.5" 5-megapixel CMOS image sensor Video preview output 1 BNC (CVBS) for local installation only, e.g. for adjusting the focal length and the image section Audio OUT / Microphone IN mm phone jack (mono signal, for stereo plug) Mic IN: max. 63 mv (RMS), input resistance 10 kohm, internal gain 20 db Ethernet 1 RJ45, 10BASE-T-/100BASE-TX-PoE Voltage supply 12 V DC ±10 % (Weidmüller male connector SL 3.50/02/90G) or via PoE (Class 0) PoE standard IEEE 802.3af Power consumption Max. 4.5 W Mechanical adjustment 3-axis mount: Pan ±90, Tilt ±90, Rotation ±180 Vandal-resistant Yes 42

43 DDF4920HDV-DN-IM Specifications IK protection IK10 protection against external mechanical impacts (up to 20 joules) Dimensions Approx. Ø 170 H 135 mm (Ø 6.7" H 5.3") Weight Approx g (2.6 lb) Operating temperature 20 C to +40 C ( 4 F to 104 F), Indoor Relative humidity 0 % 90 % RH, non-condensing Approvals/certifications CE, FCC, ACA, UVV Kassen (DGUV Test), UL, DIN EN compliant For detailed technical specifications and product documentations go to:

44 Dallmeier electronic GmbH & Co.KG Cranachweg Regensburg Germany Phone +49 (0) Fax +49 (0) info@dallmeier.com