CARD PRINTER. INSTALL GUIDE Revision 2.05

Transcription

1 CARD PRINTER INSTALL GUIDE Revision 2.05

2 Copyright Important: the technical information contained in this manual is property of MATICA System S.r.l. and is secured by copyright. The terms of the license define and specify permitted uses and other limitations. Reproduction of any part of this manual, in any form, is forbidden without the explicit written permission of MATICA System S.r.l. Technical information contained in the present manual is subject to change without notice. If not otherwise specified, any reference to companies, names, dates and addresses is purely incidental and is only intended to illustrate the use of the MATICA System S.r.l. product. Every care has been taken in the collection and verification of the documentation inserted in this manual; nevertheless MATICA System S.r.l. cannot assume any responsibility deriving from its use. Copyright 2009 MATICA System S.r.l. All rights reserved Published by MATICA System S.r.l. Printed in Italy Issue: May 2009 Revision 2.05 MATICA System S.r.l. via Guido Rossa, 4/ Paderno Dugnano MILAN - ITALY Phone Fax techsupport@maticasystem.com Web: Chica 4 Install Guide Rev Page 2/52

3 Contents Table of contents Paragraph 1 MatiCard installation... 4 Paragraph 2 Chica 4 USB Driver installation... 8 Paragraph 3 Chica 4 Ethernet configuration Paragraph 4 Ethernet configuration without Test Card.. 16 Paragraph 5 Chica 4 Ethernet Driver installation Paragraph 6 Chica 4 properties Paragraph 7 MatiCard configuration for Chica Paragraph 8 MIFARE and Smart Card configuration Paragraph 9 Chica4 MIFARE verification Paragraph 10 Chica 4 Smart Card verification Paragraph 11 Readback configuration Chica 4 Install Guide Rev Page 3/52

4 Paragraph 1 MatiCard installation Paragraph 1 MatiCard installation Before installing Matica printers driver you must install the MatiCard software. Go to the Matica User CD start page and click Install MatiCard. In the MatiCard InstallShield Wizard window, click Next. Chica 4 Install Guide Rev Page 4/52

5 Paragraph 1 MatiCard installation In the following wizard window confirm the installation clicking Next. In the following wizard windows accept the license terms and click Next. Note: in the license terms window are specified the operative systems required by the MatiCard software. Chica 4 Install Guide Rev Page 5/52

6 Paragraph 1 MatiCard installation In the following wizard windows choose the installation folder and click Next. In the following wizard window click Install to start the installation. Chica 4 Install Guide Rev Page 6/52

7 Paragraph 1 MatiCard installation When the PC has completed the installation, click Finish. On the PC desktop, double click the MatiCard icon. In the eventual MatiCard reboot warning window, click OK. Restart the PC. Chica 4 Install Guide Rev Page 7/52

8 Paragraph 2 Chica 4 USB Driver installation Paragraph 2 Chica4 USB Driver installation Power on the Matica Chica 4 Printer. Browse the Matica User CD and go to the Drivers\Chica4 Driver folder. Run the file Setup_Chica4_ exe. Select the setup language and click OK. In the setup welcome window click Next. Chica 4 Install Guide Rev Page 8/52

9 Paragraph 2 Chica 4 USB Driver installation Accept the warranty agreement and click Next. Be sure that the USB cable is disconnected and click Next. Chica 4 Install Guide Rev Page 9/52

10 Paragraph 2 Chica 4 USB Driver installation Choose the installation folder and click Next. To start the installation click Install. Chica 4 Install Guide Rev Page 10/52

11 Paragraph 2 Chica 4 USB Driver installation If the PC operating system displays a warning window about the Windows Logo testing, click Continue Anyway. The PC will display a Setup information window. Don t click the Next button. Chica 4 Install Guide Rev Page 11/52

12 Paragraph 2 Chica 4 USB Driver installation Go to C:\Windows\inf folder and check if a usbprint.inf file is present, because some printers during the installation renames this file usbprint.in. If it s so, change the name adding the final letter f or the Matica Printer won t work. Connect the USB cable to the PC and to the Printer. The PC will display the Found New Hardware Wizard window; select the Recommended installation and click Next. Chica 4 Install Guide Rev Page 12/52

13 Select the Matica Chica and click Next. Paragraph 2 Chica 4 USB Driver installation If the PC operating system displays a warning window about the Windows Logo testing, click Continue Anyway. When the PC has completed the Found New Hardware installation, click Finish. Chica 4 Install Guide Rev Page 13/52

14 Paragraph 2 Chica 4 USB Driver installation In the Matica Chica Setup information window remained open, click Next. When the Matica Chica Setup has been completed, click Finish. Chica 4 Install Guide Rev Page 14/52

15 Paragraph 3 Chica 4 Ethernet configuration Paragraph 3 Chica4 Ethernet configuration Power on the Matica Chica 4 Printer. Check that the ribbon and a plastic card will be present into the Printer. Push and hold the Printer button until it blinks, then release it. The Chica 4 will print a Test Card; read the Printer IP Address on the card. If the Address is not suitable with the current PC configuration (i.e or ), follow the procedure shown in Paragraph 4. Change the PC IP Address on the same range of the Printer Address; be sure that the first three sets of numbers of the address will be the same between PC and Printer and the fourth set of numbers will be different. Connect the Printer to the PC using a Hub, a Switch or an Ethernet crossed cable, depending on the LAN configuration. Open the Internet Browser and enter in the address bar the Printer IP Address. Set the Ethernet configuration as needed and click on Apply Changes. Disconnect the Ethernet cable e restore the original IP Address of the PC. Connect the PC and the Printer to the LAN. Install the Ethernet Driver as shown in Paragraph 5. Chica 4 Install Guide Rev Page 15/52

16 Paragraph 4 Ethernet configuration without Test Card Paragraph 4 Ethernet configuration without Test Card If the IP Address printed on the Test Card is not suitable with the current PC configuration (i.e or ), perform the USB Driver installation shown in Paragraph 2. When finished, go to the PC Printers folder, right click the Matica Chica printer and select the Printing Preferences option. In the Matica Chica Printing Preferences window, select the Tools tab. Click Dialog with Printer. Chica 4 Install Guide Rev Page 16/52

17 Paragraph 4 Ethernet configuration without Test Card Select the Matica Chica into the Discuss with combo box. Digit into the Command Box the syntax Pip; followed by the IP Address needed, then press Enter and into the Answer box will be displayed OK. Digit into the Command Box the syntax Penm; followed by the Subnet Mask needed, then press Enter and into the Answer box will be displayed OK. Click Exit and then, in the Preferences window, click Apply. Disconnect the USB cable and power off the Chica 4 Printer. Delete the USB Driver from the PC Printers folder. Connect the Printer to the PC using a Hub, a Switch or a Ethernet crossed cable, depending on the LAN configuration. Power on the Printer and install the Ethernet Driver as shown in Paragraph 5. Chica 4 Install Guide Rev Page 17/52

18 Paragraph 5 Chica 4 Ethernet Driver installation Paragraph 5 Chica4 Ethernet Driver installation Browse the Matica User CD and go to the Drivers\Chica4 Driver folder. Run the file Setup_Chica4_ exe. Select the setup language and click OK. In the setup welcome window click Next. Chica 4 Install Guide Rev Page 18/52

19 Paragraph 5 Chica 4 Ethernet Driver installation Accept the warranty agreement and click Next. Be sure that no USB cable will be connected to the Printer and click Next. Chica 4 Install Guide Rev Page 19/52

20 Paragraph 5 Chica 4 Ethernet Driver installation Choose the installation folder and click Next. To start the installation click Install. Chica 4 Install Guide Rev Page 20/52

21 Paragraph 5 Chica 4 Ethernet Driver installation If the PC operating system displays a warning window about the Windows Logo testing, click Continue Anyway. Check mark the Ethernet Setting option and click Next. Chica 4 Install Guide Rev Page 21/52

22 Paragraph 5 Chica 4 Ethernet Driver installation Select the Search by printer s serial number option into the combo box of the IP port detection method area. Enter the Matica Chica 4 serial number, written on the Printer Test Card, into the related box of the Search printer by serial number area. Click Start. When the Printer has been detected, click on the related row containing its MAC Address, HostName and IP Address. Chica 4 Install Guide Rev Page 22/52

23 Paragraph 5 Chica 4 Ethernet Driver installation Keep or change the Printer port name into the related box and click Add port. When the Matica Chica Setup has been completed, click Finish. Chica 4 Install Guide Rev Page 23/52

24 Paragraph 6 Chica 4 properties Paragraph 6 Chica4 properties Go to the PC Printers folder and right click the Matica Chica printer. Select the Set as Default Printer option. Right click again the Matica Chica printer and select the Properties option. Chica 4 Install Guide Rev Page 24/52

25 Paragraph 6 Chica 4 properties In the Matica Chica Printing Preferences window, select the Graphic tab. Choose the R Black ribbon - K cards option into the Ribbon combo box and click Set ribbon. To save the Chica settings click OK and then Apply. Chica 4 Install Guide Rev Page 25/52

26 Paragraph 6 Chica 4 properties Select the Tools tab and click Dialog with Printer. Note: the diagnostic tools are placed in the Direct Printer Control box. In order to test the printer communication, check if the data of the Printer ID box are correct and click Exit to return to Matica Chica Properties window. Chica 4 Install Guide Rev Page 26/52

27 Paragraph 6 Chica 4 properties If the Chica has an Encoder, select the Tools tab and click Encoder Settings. In the Magnetic Encoder window, select the Coercivity and click Set Coercivity; to save the Encoder settings click OK and then Apply. In the Chica Preferences window, to save the settings click OK and Apply. Chica 4 Install Guide Rev Page 27/52

28 Paragraph 7 MatiCard configuration for Chica 4 Paragraph 7 MatiCard configuration for Chica4 On the PC desktop, double click the MatiCard icon. In the MatiCard Graphic window click Preferences from the Options menu. In the Preferences window, select the Matica Chica Printer Type and, if you have connected the printer to an USB port, check mark the USB Connection. To save the preferences click Apply. Chica 4 Install Guide Rev Page 28/52

29 Paragraph 8 MIFARE and Smart Card configuration Paragraph 8 MIFARE and Smart Card configuration Go to the PC Printers folder and rename the Matica Chica printer in Matica Module USB 1. Select the Add Printer command from the File menu and click Next in the welcome window of the Add Printer Wizard; then choose the Local printer option and click Next; be careful not to check mark the Automatically detect and install my Plug and Play printer option. Chica 4 Install Guide Rev Page 29/52

30 Paragraph 8 MIFARE and Smart Card configuration Select the Create a new port option and choose Local Port into the Type of port combo box; then click Next. Digit the path C:\temp\matica.prn into the Port Name window; then click OK. Chica 4 Install Guide Rev Page 30/52

31 Paragraph 8 MIFARE and Smart Card configuration Select Matica into the Manufacturer area and Matica Chica into the Printers area; then click Next. Select the Yes option to set the Matica Chica as default Printer and click Next. Chica 4 Install Guide Rev Page 31/52

32 Paragraph 8 MIFARE and Smart Card configuration Select the Do not share this printer option and click Next. Select the No answer to the print test page question and click Next. Chica 4 Install Guide Rev Page 32/52

33 Paragraph 8 MIFARE and Smart Card configuration Click Finish to complete the installation. Right click the Matica Chica printer and select the Properties option. Chica 4 Install Guide Rev Page 33/52

34 Paragraph 8 MIFARE and Smart Card configuration Choose the Advanced tab into the Matica Chica Properties window and select the Print directly to the printer option; then click OK. Chica 4 Install Guide Rev Page 34/52

35 Paragraph 9 Chica 4 MIFARE verification Paragraph 9 Chica4 MIFARE verification Power on the Chica 4 and connect the 9M-9F serial cable from the Printer MIFARE serial port to the related PC COM port. Download the SDK MiFare for Chica and Dupla file from the website address specified in the SDK document attached to the Printer. Extract the SDK_MiFare_Chica&Dupla.zip file. Chica 4 Install Guide Rev Page 35/52

36 Extract the ReaderUtility_v3.2.0.zip file. Paragraph 9 Chica 4 MIFARE verification On the PC desktop, double click the MatiCard icon. In the MatiCard Graphic window click the Smart Card button. Chica 4 Install Guide Rev Page 36/52

37 Paragraph 9 Chica 4 MIFARE verification Into the Smart Card interface settings area of the Smart card Definition window, click the SmartCard Program button and select the ReaderUtility.exe file; then click the Interface File button and select the ReaderUtility.chp file. Finally click Apply. Insert a contactless card into the Printer Feeder. In the MatiCard Graphic window, click the Print button. Click the Print Current button in the Print Options window. Chica 4 Install Guide Rev Page 37/52

38 Paragraph 9 Chica 4 MIFARE verification The Reader Utility window will be displayed. Select the PC COM used. Be sure that the contactless card will be under the MIFARE Reader. Chica 4 Install Guide Rev Page 38/52

39 Paragraph 9 Chica 4 MIFARE verification Select the Open / Close Reader command from the Reader menu of the Reader Utility window. Now the MIFARE is ready to read the contactless card. Chica 4 Install Guide Rev Page 39/52

40 Paragraph 9 Chica 4 MIFARE verification Select the ISO Command tab and click several times the Req A button. The Terminal window must displays alternatively an N and the data read. Close the Reader Utility program and the Printer will eject the contactless card. This verification works only for the MiFare and doesn t perform any printing. Please refer to the ReaderDLL_v3.3.0.zip file in the Reader Utility folder to develop the customer personalization application. Refer also to the MatiCard 3 Add-Ins rev.08.pdf file to manage the data exchange between the MatiCard program and the customer application. Chica 4 Install Guide Rev Page 40/52

41 Paragraph 10 Chica 4 Smart Card verification Paragraph 10 Chica 4 Smart Card verification Download the Smart Card System Setup Ver 3.31 and the SDK Smart card Samples Ver 3.30 files from the website address specified in the SDK document attached to the Printer. Run the SmartCardSystemSetup_331.exe file. Chica 4 Install Guide Rev Page 41/52

42 Paragraph 10 Chica 4 Smart Card verification Click Next in the two welcome windows of the InstallShield Wizard and in the Requirements window; then choose the Destination Folder and click Next. Click Install to start the program installation. Chica 4 Install Guide Rev Page 42/52

43 Paragraph 10 Chica 4 Smart Card verification When the installation has been completed, click Finish. Extract the SmartCardSDKSamples_330.zip file. Chica 4 Install Guide Rev Page 43/52

44 Paragraph 10 Chica 4 Smart Card verification Copy the MFC42D.DLL and MSVCRTD.DLL files in the COMPULSORY_UPDATE subfolder of the Smart Card SDK Samples folder and paste them into the system32 folder of the PC Operating System. Connect the interface cable to the Printer serial port. Install the customer Smart Card Reader; the Reader must be PCSC compatible. Insert the Chip Card Adapter into the Reader (the reader shown in the picture below is a sample). Insert a Smart Card into the Printer Feeder. Chica 4 Install Guide Rev Page 44/52

45 Paragraph 10 Chica 4 Smart Card verification On the PC desktop, double click the MatiCard icon. In the MatiCard Graphic window click the Smart Card button. Into the Smart Card Definition window, select the DLL option in the Interface file format combo box, then click the Application Dll button and select the \MultiChip\Samples\PCSC_TestMUTE\Debug\pc_sc_test_mute.dll file of the Smart Card SDK Samples folder. Now select the PC/SC option and the customer Reader in the Port Configuration combo box. Finally click Apply. Chica 4 Install Guide Rev Page 45/52

46 Paragraph 10 Chica 4 Smart Card verification In the MatiCard Graphic window, click the Print button. Click the Print Current button in the Print Options window. Check that the printing will be completed. Chica 4 Install Guide Rev Page 46/52

47 Paragraph 11 Readback configuration Paragraph 11 Readback configuration Go to the PC Printers folder and rename the Matica Chica printer in Matica Module USB 1. Select the Add Printer command from the File menu and click Next in the welcome window of the Add Printer Wizard; then choose the Local printer option and click Next; be careful not to check mark the Automatically detect and install my Plug and Play printer option. Chica 4 Install Guide Rev Page 47/52

48 Paragraph 11 Readback configuration Select the Create a new port option and choose Local Port into the Type of port combo box; then click Next. Digit the path C:\temp\matica.prn into the Port Name window; then click OK. Chica 4 Install Guide Rev Page 48/52

49 Paragraph 11 Readback configuration Select Matica into the Manufacturer area and Matica Chica into the Printers area; then click Next. Digit Matica Module into the Printer name box. Select the Yes option to set the Matica Module as default Printer and click Next. Chica 4 Install Guide Rev Page 49/52

50 Paragraph 11 Readback configuration Select the Do not share this printer option and click Next. Select the No answer to the print test page question and click Next. Chica 4 Install Guide Rev Page 50/52

51 Paragraph 11 Readback configuration Click Finish to complete the installation. Right click the Matica Module printer and select the Properties option. Chica 4 Install Guide Rev Page 51/52

52 Paragraph 11 Readback configuration Choose the Advanced tab into the Matica Module Properties window and select the Print directly to the printer option; then click OK. Chica 4 Install Guide Rev Page 52/52