Lab 9: Global Configurations
|
|
- Shanna Eaton
- 5 years ago
- Views:
Transcription
1 Lab 9: Global Configurations Objectives After completing this lab, you will be able to: Connect to an AM Stream that is under Global Configuration Management (the UK variant) Create a new US variant based on the original UK variant using the Global Configuration Manager Make some changes to the US variant and then push those changes back to the UK variant Scenario The server has already been setup with a UK stream which includes Requirements, Models and Tests. You will first create a new repository workspace for Dan to work in that stream. You will see how Rhapsody selects a Global Configuration context in which to create / display links. You will then use the Global Configuration tool to create a new US variant of the project first creating a baseline and then creating new streams for RM, QM and AM. You will then create a new repository workspace for Dan to work in the US stream. You will modify the model and deliver the changes to the US stream. You will then deliver those changes to the UK stream by changing the flow target of the US stream. It is assumed you are still working in Dans workspace from the previous lab Task 1: Connect to a Project and Create a New Repository Workspace In this task, you will connect to an Architecture Management project that is opted-in to Global Configuration Management. You will create a new repository workspace and load the model that has already been created. 1. Connect to the Architecture Management project: a. In the Team Artifacts panel, right-click the dan@rmm repository connection and select Manage Connected Project Areas: Copyright IBM Corp
2 Rhapsody Model Manager Tech Jam b. Select the RMM-GC-Models project area: c. Click Finish 2. Create a Repository Workspace: a. Expand the RMM-GC-Models project area: 9-2 Copyright IBM Corp. 2018
3 Lab 7 Streams and Components b. Expand the Source Control section c. Expand the All Streams section d. Right-click the RMM-GC-Models-UK Stream and select New Repository Workspace: e. In the Repository Workspace Name field, add Dan to the end of the current text: f. Click Next g. Select Use current repository: Copyright IBM Corp
4 Rhapsody Model Manager Tech Jam h. Click Next i. In the Read Access Permission window, select Project Area and then select RMM-GC-Models: j. Click Next k. In the Components to Add window, select the RMM-GC-Models-System (it should be already selected) l. Click Finish m. In the Load Repository Workspace window, select Browse the components to select the folders to be loaded: 9-4 Copyright IBM Corp. 2018
5 Lab 7 Streams and Components n. Click Next o. In the Repository folders to load window, clear the RMM-GC-Models-System selection and then re-select it: TIP: This selection starts out filled in rather than selected. In which case the folder structure will not be created correctly on the hard drive. Selecting the RMM-GC-Models-System component ensures that a folder is created for it. p. Expand the Advanced Options section q. Select Load component files into sandbox subfolder r. Select Load the selected folders but do not create Eclipse projects: Copyright IBM Corp
6 Rhapsody Model Manager Tech Jam s. Click Finish t. If you get a confirm dialog, click OK: Task 2: Open the System Model In this task, you will open the model that you just loaded from the team workspace. 1. Open the Rhapsody Model: a. Switch to the Rhapsody client b. From the menu, select File Open c. Navigate to C:\Workspaces\dan\RMM-GC-Models-UK Workspace Dan\RMM-GC-Models- System\ADAS d. Double-click the ADAS_5.rpyx file e. Click OK: 9-6 Copyright IBM Corp. 2018
7 Lab 7 Streams and Components 2. Select a Global Configuration a. Click the Global Configuration toolbar selector and click <<Select>> b. If you receive a security alert, click Yes: c. If prompted to login, login as dan/dan d. In the Project area field, select RMM-GC e. In the Search field, type * f. Select the RMM-GC-System-UK Global Stream: Copyright IBM Corp
8 Rhapsody Model Manager Tech Jam g. Click OK Task 3: Load Collections and Observe Connected Requirements and Tests In this task you will connect to the RM and QM projects associated with this AM project. You will load a collection of requirements and also create a link to a test case. 1. Load a Requirement Collection a. In the browser, expand the Remote Artifact Packages category b. Right-click the RM Project and select Login to Server: c. Click Yes: d. In the tree, select the root (RMM-GC-Requirements) 9-8 Copyright IBM Corp. 2018
9 Lab 7 Streams and Components e. In the Select artifact panel, select View: Requirements Only: f. Click OK g. In the Rhapsody browser, expand the tree and note the list of Requirements: 2. Create a link to Requirements a. Expand the Remote Requirements Tables category and double-click the Requirements Only table to open it: Copyright IBM Corp
10 Rhapsody Model Manager Tech Jam b. Right-click in the Link Type cell in the first row and select Add New Satisfies: c. In the browser, expand Packages d. In the mini-browser, expand Packages and select the A_ItemDefinition Package: e. Click OK TIP: In this lab we don t care where links are being made only that we can see and link to the artifacts that are relevant for this specific stream or variant Copyright IBM Corp. 2018
11 Lab 7 Streams and Components 3. Create a link to RQM a. Right-click the QM Project Remote Artifact Package and select Login to Server b. In the browser, right-click the A_ItemDefinition package and select Add New OSLC Link c. In the sidebar, select OSLC Picker: d. In the Link Type field, select Validated By e. In the Project field, select RMM-GC-Testing f. Note that the Global Configuration field indicates the context in which this new link will be made: g. In the Type field, select Select Test Case h. In the Link To field, click Select: Copyright IBM Corp
12 Rhapsody Model Manager Tech Jam i. Note that there is only a single Test Case called Test Subsystem A j. Select the Test Case and click OK k. Click OK to close the Add Link dialog and create the new link 4. Deliver the Changes: a. Save the model b. Right-click the root of the browser and select Rational Team Concert Deliver 5. Close the model: a. From the menu, select File Close Task 4: Create a New Global Configuration In this task you will switch to the Global Configuration application and create a new US variant from the UK variant you have been working with so far. 1. Create a Global Baseline a. In the web browser, open the Global Configuration Management application: 9-12 Copyright IBM Corp. 2018
13 Lab 7 Streams and Components TIP: IMPORTANT make sure you are logged in as ibm the other roles may not have sufficient permissions b. Click the RMM-GC project to open it: c. Click Browse and create components d. Click the RMM-GC-System component: e. Click the RMM-GC-System-UK Stream: Copyright IBM Corp
14 Rhapsody Model Manager Tech Jam f. Note the Stream has contributions (configurations) from RM, QM and AM: 2. Stage a Baseline a. Click the menu button next to the RMM-GC-System UK global stream and select Stage Baseline: b. In the Name Suffix field, type V Copyright IBM Corp. 2018
15 Lab 7 Streams and Components c. Click OK d. In the toolbar, click Commit Baseline: TIP: This operation is available from the main toolbar or from the context menu of the global stream Click Commit: Note that Baselines are created automatically for RM, QM and AM (but only if you have the correct permissions QM in particularly starts with no permissions not even the project admin can create baselines if you have not configured this then the commit will fail) Copyright IBM Corp
16 Rhapsody Model Manager Tech Jam 3. Create a New Stream a. Select the menu button next to the new RMM-GC-System UK V1 Baseline and select Create Stream: b. In the Name Suffix field, type US c. Click OK d. Select all of the Configurations under the new Stream (and clear the checkbox next to the stream): 9-16 Copyright IBM Corp. 2018
17 Lab 7 Streams and Components e. Click the menu button for one of them and select Create Stream: f. Note that at the time of writing AM does not support this automation feature: g. Click Cancel h. Clear the RMM-GC-Models-UK V1 checkbox i. Try the operation again from the RMM-GC-Testing-UK V1 menu: Copyright IBM Corp
18 Rhapsody Model Manager Tech Jam j. Click OK: k. Note that the RM and QM contributions have been replaced with new streams but the AM contribution is still a snapshot/baseline: 4. Create the new AM Stream Manually: a. Switch back to the RTC Eclipse client b. In the Team Artifacts panel, right-click the RMM-GC-Models-UK stream and select Show Snapshots: 9-18 Copyright IBM Corp. 2018
19 Lab 7 Streams and Components c. Double-click the RMM-GC-Models-UK V1 Snapshot d. In the Links panel, click Create a new stream: e. Rename the new Stream RMM-GC-Models-US f. In the Owned By field, click Browse and select the RMM-GC-Models (RMM) Project: Copyright IBM Corp
20 Rhapsody Model Manager Tech Jam g. Click Save 5. Modify the Global Configuration: a. Return to the web browser b. Click the menu button next to the RMM-GC-Models-UK V1 snapshot and select Remove: TIP: Replace is not supported for either CCM or AM configurations and so the old component must be removed first c. Click Remove: d. Click Add Configurations: 9-20 Copyright IBM Corp. 2018
21 Lab 7 Streams and Components e. In the header field, select Architecture Management f. In the Project Area field, select RMM-GC-Models g. In the Type field, select Stream h. In the Stream Name field, type * i. Select the RMM-GC-Models-US Stream: j. Click OK Task 5: Modify Requirements and Tests In this task you will modify the Requirements and Tests in the new US Global Configuration 1. Remove Requirements: Copyright IBM Corp
22 Rhapsody Model Manager Tech Jam a. In the Global Configuration tree, right-click the Requirements Management project and select Open in New Window: TIP: This is a quick and easy way to open the RM project in the correct context in this case the US Global Configuration b. Confirm the current context is the RMM-GC-System US Global Configuration: c. Open the System Requirements module d. Select the headings 2, 3 and 4: 9-22 Copyright IBM Corp. 2018
23 Lab 7 Streams and Components e. Click the menu button for one of the selections and select Remove 3 Artifacts: Copyright IBM Corp
24 Rhapsody Model Manager Tech Jam f. Click Remove: g. Apply the Requirements Only view and note that there are now far fewer requirements: 9-24 Copyright IBM Corp. 2018
25 Lab 7 Streams and Components TIP: This is just a simple change to demonstrate the principle of course in real systems the existing requirements would be modified, and new ones would be added. h. Close the browser tab and return to the Global Configurations tab. 2. Modify the Test Data: a. Click the RMM-GC-Testing US stream: b. From the menu, click Construction Browse Test Cases c. Note there is a single Test Case d. From the menu, click Construction Create Test Case Copyright IBM Corp
26 Rhapsody Model Manager Tech Jam e. Name the new Test Case Test Subsystem B: f. Click Save TIP: Again, this is a simple change to illustrate the principle - in the UK variant there is only one Test Case but in the US Variant there are two. Task 6: Switch Global Configurations In this task you will load the US variant into Dan s sandbox and open the US Variant model after first creating a repository workspace for that stream. You will then select the correct Global Configuration for that stream in Rhapsody. 1. Create a Repository Workspace: a. Switch to the RTC client b. In the Team Artifacts panel, right-click the RMM-GC-Models-US Stream and select New Repository Workspace c. Add Dan to the end of the name: 9-26 Copyright IBM Corp. 2018
27 Lab 7 Streams and Components d. Click Next e. Select Use current repository f. Click Next g. Select Private: h. Click Next i. Note the Component is already selected: Copyright IBM Corp
28 Rhapsody Model Manager Tech Jam j. Click Finish k. In the Load Repository Workspace window, select Browse the components to select the folders to be loaded: l. Click Next m. In the Repository folders to load window, clear, then select the RMM-GC-Models-System Component: TIP: IMPORTANT this selection starts as filled in rather than selected make sure you clear the box and then select it again so that a tick appears otherwise the correct file structure will not be created. n. Expand the Advanced Options section o. Select Load component files into sandbox subfolder 9-28 Copyright IBM Corp. 2018
29 Lab 7 Streams and Components p. Select Load the selected folders but do not create Eclipse projects: q. Click Finish r. If you get a confirm dialog, click OK: 2. Note the Incoming Baseline: a. Note that in the Pending Changes view there is an Incoming Baseline to the UK stream: TIP: This is just simple housekeeping by RTC. Accepting the Baseline will not impact any current work. 3. Accept the Baseline: Copyright IBM Corp
30 Rhapsody Model Manager Tech Jam a. Right-click the incoming Baseline and select Accept 4. Open the model and switch to the US Stream: a. Switch to the Rhapsody client b. Click File Open c. Browse to C:\Workspaces\dan\RMM-GC-Models-US Workspace Dan\RMM-GC-Models- System\ADAS TIP: Note that you are browsing to the newly created folder for the US variant d. Double-click the ADAS_5.rpyx file e. Note that Rhapsody still has the UK Global Configuration selected and so displays a warning: f. Click OK 5. Select a Global Configuration a. Click the Global Configuration toolbar selector and click <<Select>> b. If you receive a security alert, click Yes: 9-30 Copyright IBM Corp. 2018
31 Lab 7 Streams and Components c. If prompted to login, login as dan/dan d. In the Project area field, select RMM-GC e. In the Search field, type * f. Select the RMM-GC-System-US Global Stream: g. Click OK 6. Load Requirements: a. Expand the Remote Artifact Packages category b. Right-click the RM Project and select Login to Server: Copyright IBM Corp
32 Rhapsody Model Manager Tech Jam c. Expand the RM project d. Note that the project has a Collection but it starts off unloaded: TIP: Since one of the requirements has a link to an element in this model the requirement is automatically displayed. e. Right-click the View: Requirements Only collection and select Populate With All Artifacts: f. Note that the collection of Requirements has changed showing only those requirements that are part of the linked RM project in this new context and the requirement that has a link is shown outside that collection: 9-32 Copyright IBM Corp. 2018
33 Lab 7 Streams and Components Task 7: Deliver Changes Between Streams In this task you will make some changes to the model in the US Stream and then deliver those changes to the UK Stream. To achieve this, you will change the flow target, accept the incoming changes and then return the flow target to its original position. 1. Change the model a. In the Browser, right-click the Packages category and select Add New Package: b. Name the new Package F_Documentation: Copyright IBM Corp
34 Rhapsody Model Manager Tech Jam 2. Deliver the Changes to the US Stream: a. Save the model b. Right-click the root of the browser and select Rational Team Concert Deliver 3. Change the US Flow Target: a. Switch to the RTC client b. In the Pending Changes view, right-click the RMM-GC-Models-US Workspace and select Change Flow Target: c. In the search field, type *UK d. Select the RMM-GC-Models-UK Stream: 9-34 Copyright IBM Corp. 2018
35 Lab 7 Streams and Components e. Click OK f. Note the new outgoing changes and the new outgoing flow target 4. Create a Flow diagram: a. Right-click the RMM-GC-Models-US Workspace and select New Flow Diagram: b. In the new diagram, click the Show Flow Targets button in Dans workspace: c. Note that the diagram indicates the default flow is the US Stream but the current outgoing flow is the UK Stream: Copyright IBM Corp
36 Rhapsody Model Manager Tech Jam d. Close the Flow Diagram and don t save it 5. Deliver the Changes: a. Right-click the Outgoing Change Set and select Deliver b. Click OK: 6. Restore the Flow: a. Right-click the US Workspace and select Change Flow Target b. Click Select Default Outgoing c. Click OK d. Note that the US Workspace has returned to the default flow direction: e. Note that Dan now has an incoming change set in the UK Workspace: 9-36 Copyright IBM Corp. 2018
37 Lab 7 Streams and Components TIP: The changes were delivered into the UK Stream but Dan has not yet accepted those changes into his own workspace for that Stream 7. Accept the Changes: a. Right-click the change set and select Accept Copyright IBM Corp
Lab 3: Linking to OSLC Artifacts
Objectives After completing this lab, you will be able to: Load Remote Collections of OSLC Requirements Add Traceability from Model Elements to Remote Artifacts (Requirements, Test Cases, Work Items) Overview
More informationLab 2: Adding a Rhapsody Model to RMM
Lab 2: Adding a Rhapsody Model to RMM Objectives After completing this lab, you will be able to: Create an RTC repository workspace and local sandbox Add a Rhapsody model to RMM Link a work item to a change
More informationLab 7: Baselines and History
Lab 7: Baselines and History Objectives After completing this lab, you will be able to: Compare a historical version of a Rhapsody unit to the current one. Create a baseline in a component Scenario A baseline
More informationLab 1: Adding a Rhapsody Model to RMM
Lab 1: Adding a Rhapsody Model to RMM Objectives After completing this lab, you will be able to: Create an RTC repository workspace and local sandbox Add a Rhapsody model to RMM Link a work item to a change
More informationLab 1: Creating an RMM Project
Lab 1: Creating an RMM Project Objectives After completing this lab, you will be able to: Create a Rhapsody Model Manager project on the Jazz Team Server Scenario In this Lab, you will create a new Rhapsody
More informationLab 8: Streams & Components
Lab 8: Streams & Components Objectives After completing this lab, you will be able to: Create a new stream Create components in the stream Restrict Access to those components to specific teams, individuals
More informationLab 3: Editing a Rhapsody Model in RMM
Lab 3: Editing a Rhapsody Model in RMM Objectives After completing this lab, you will be able to: Create an RTC repository workspace and local sandbox Load a Rhapsody model from RMM into your local sandbox
More informationLab 5: Reporting with RPE
Objectives After completing this lab, you will be able to: Report on Rhapsody Models and Linked OSLC Artifacts using Rational Publishing Engine Scenario In this Lab, you will first start the Rhapsody REST
More informationLab DSE Designing User Experience Concepts in Multi-Stream Configuration Management
Lab DSE-5063 Designing User Experience Concepts in Multi-Stream Configuration Management February 2015 Please Note IBM s statements regarding its plans, directions, and intent are subject to change or
More informationIBM Best Practices Working With Multiple CCM Applications Draft
Best Practices Working With Multiple CCM Applications. This document collects best practices to work with Multiple CCM applications in large size enterprise deployment topologies. Please see Best Practices
More informationInstallation Manual 1/33. version: 1.0 revision: 1
Installation Manual 1/33 Table of Contents 1 Scope...4 1.1 System Configuration...4 2 Recommended Environment...4 2.1 Software...4 2.2 Hardware...4 3 Preparation...5 3.1 Create jazz.net account...5 3.2
More informationLab 5: Reporting with RPE
Lab 5: Reporting with RPE Objectives After completing this lab, you will be able to: Report on Rhapsody Models and Linked Requirements using Rational Publishing Engine Scenario In this Lab, you will first
More informationPST for Outlook Admin Guide
PST for Outlook 2013 Admin Guide Document Revision Date: Sept. 25, 2015 PST Admin for Outlook 2013 1 Populating Your Exchange Mailbox/Importing and Exporting.PST Files Use this guide to import data (Emails,
More informationWeb Ad Image Portal. User Manual
Web Ad Image Portal User Manual Rev 06232008 Web Ad Image Portal User Manual Rev 06232008 Login and Home Page Access the portal via http://images.autobase.net Login with your dealer.autobase.net account
More informationBDM Hyperion Workspace Basics
BDM Hyperion Workspace Basics Contents of this Guide - Toolbars & Buttons Workspace User Interface 1 Standard Toolbar 3 Explore Toolbar 3 File extensions and icons 4 Folders 4 Browsing Folders 4 Root folder
More informationEclipse Plug-in for AccuRev User s Guide Version April 2012
Eclipse Plug-in for AccuRev User s Guide Version 2012.1 April 2012 Revised 4/16/12 Copyright AccuRev, Inc. 1995 2012 ALL RIGHTS RESERVED This product incorporates technology that may be covered by one
More informationCollaborative Development using IBM Rational Team Concert
Collaborative Development using IBM Rational Team Concert Work Items, Software Configuration Management, and Team Collaboration Platform for COBOL, Java, PL/I, C/C++, and Assembler Development Student
More informationEssentials of design management with Rational Software Architect
Rational Self-paced training workbook Essentials of design management with Rational Software Architect Lab exercises (Self-paced training) Self-paced training workbook Self-paced training workbook Essentials
More informationIntroduction. Opening and Closing Databases. Access 2010 Managing Databases and Objects. Video: Working with Databases in Access 2010
Access 2010 Managing Databases and Objects Introduction Page 1 Each Access database consists of multiple objects that let you interact with data. Databases can include forms for entering data, queries
More informationFairfield University Using Xythos for File Storage
Fairfield University Using Xythos for File Storage Version 7.0 Table of Contents I: Accessing your Account...2 II: Uploading Files via the Web...2 III: Manage your Folders and Files via the Web...4 IV:
More informationInstallation and Upgrade Guide Zend Studio 9.x
Installation and Upgrade Guide Zend Studio 9.x By Zend Technologies, Inc. www.zend.com Disclaimer The information in this document is subject to change without notice and does not represent a commitment
More informationGetting Started with Penn State WikiSpaces
Getting Started with Penn State WikiSpaces About Penn State WikiSpaces Penn State WikiSpaces is a platform intended to support Penn State-associated collaboration. Wikis are websites that allow for the
More informationInstallation and Upgrade Guide Zend Studio 9.x
Installation and Upgrade Guide Zend Studio 9.x By Zend Technologies, Inc. www.zend.com Disclaimer The information in this document is subject to change without notice and does not represent a commitment
More informationUsing NetShow Commands
CHAPTER 10 Network show (NetShow) commands represent a set of read-only commands. These are primarily, show commands that you can run on devices that are managed in LMS. You can specify the commands that
More informationOIG 11G R2 Field Enablement Training
OIG 11G R2 Field Enablement Training Lab 9- UI Customization Simple Disclaimer: The Virtual Machine Image and other software are provided for use only during the workshop. Please note that you are responsible
More informationRestoring Files and Folders
Applicable Products These instructions apply to the following products: Barracuda Intronis Backup - MSP Files and Folders Restore Overview You can restore Files and Folders by: Folder Hierarchy Daily Snapshots
More informationFiltering - Zimbra
Filtering Email - Zimbra Email filtering allows you to definite rules to manage incoming email. For instance, you may apply a filter on incoming email to route particular emails into folders or delete
More informationWe start by providing you with an overview of the key feature of the IBM BPM Process Portal.
Lab 1 Process Portal 1.1 Overview This lab exercise will make you familiar with the key capabilities of the ready-to-use Process Portal included with IBM Business Process Manager (BPM). You will experience
More informationLab 4: Pass the Data Streams to a Match Processor and Define a Match Rule
Lab 4: Pass the Data Streams to a Match Processor and Define a Match Rule In this lab you will feed both the data records and the error records to a match processor and define a match rule. At the end
More informationAccuBridge for IntelliJ IDEA. User s Guide. Version March 2011
AccuBridge for IntelliJ IDEA User s Guide Version 2011.1 March 2011 Revised 25-March-2011 Copyright AccuRev, Inc. 1995 2011 ALL RIGHTS RESERVED This product incorporates technology that may be covered
More informationDealing with Event Viewer
Dealing with Event Viewer Event Viewer is a troubleshooting tool in Microsoft Windows 2000.This how-to article will describe how to use Event Viewer. Event Viewer displays detailed information about system
More informationDSS User Guide. End User Guide. - i -
DSS User Guide End User Guide - i - DSS User Guide Table of Contents End User Guide... 1 Table of Contents... 2 Part 1: Getting Started... 1 How to Log in to the Web Portal... 1 How to Manage Account Settings...
More informationCaliberRM 5.1 Integration for Describe Enterprise
CaliberRM 5.1 Integration for Describe Enterprise Describe Enterprise integration is now available from within the Borland CaliberRM 5.1 software suite. This document describes how to set up and configure
More informationDOCUMENTUM D2. User Guide
DOCUMENTUM D2 User Guide Contents 1. Groups... 6 2. Introduction to D2... 7 Access D2... 7 Recommended browsers... 7 Login... 7 First-time login... 7 Installing the Content Transfer Extension... 8 Logout...
More informationLab - Share Resources in Windows
Introduction In this lab, you will create and share a folder, set permissions for the shares, create a Homegroup and a Workgroup to share resources, and map a network drive. Due to Windows Vista lack of
More informationImport Template Import Template
How to use the SAFe 4.5 beta templates in CLM This document explains how to deploy the SAFe 4.5 beta templates in CLM 6.0.1 or later and create project areas to support SAFe Portfolio, Large Solution,
More informationEnd User Manual. December 2014 V1.0
End User Manual December 2014 V1.0 Contents Getting Started... 4 How to Log into the Web Portal... 5 How to Manage Account Settings... 6 The Web Portal... 8 How to Upload Files in the Web Portal... 9 How
More informationPerform a Server Move for Junxure
Perform a Server Move for Junxure These instructions are the recommendations for IT personnel on how to perform a Server Move for the Junxure Database. Junxure Tech Support understands every environment
More informationIBM Mobile Portal Accelerator Enablement
IBM Mobile Portal Accelerator Enablement Hands-on Lab Exercise on XDIME Portlet Development Prepared by Kiran J Rao IBM MPA Development kiran.rao@in.ibm.com Jaye Fitzgerald IBM MPA Development jaye@us.ibm.com
More informationUsing SourceTree on the Development Server
Using SourceTree on the Development Server This content has been modified to exclude client information. Such omissions include the client name and details of the client s infrastructure, such as domain
More informationRational Team Concert
Rational Team Concert Guide for Configuring a New Account in the Jazz Hub Contents 1. Introduction... 2 2. Create a user account for Jazz... 3 3. Create a New Project... 6 4. Manage Access to the Project...
More informationImportant notice regarding accounts used for installation and configuration
System Requirements Operating System Nintex Reporting 2008 can be installed on Microsoft Windows Server 2003 or 2008 (32 and 64 bit supported for both OS versions). Browser Client Microsoft Internet Explorer
More informationImplement an ADT while using Subversion
1 Objectives Learn to use Subversion Implement an ADT while using Subversion In this lab, you learn about the version control tool called Subversion and you will implement a Java class given an interface.
More informationUser Manual Appointment System
User Manual Appointment System Page 1 of 17 1.0 TABLE OF CONTENTS TABLE OF CONTENTS... 2 System Overview... 3 Menu Options... 3 Application Access... 3 Patient Registration... 6 Schedule Appointment...
More information8.0.6 New Features Guide Auto Window/Level Adjustments
8.0.6 New Features Guide Improvements to the feature allow users to quickly and easily set for images. These adjustments will be automatically and consistently applied to similar images. Window/Level Adjustments
More informationSharePoint 2010 Instructions for Users
SharePoint 2010 Instructions for Users 1. Access your SharePoint Web site...2 2. Work with folders and documents in a Shared Documents Library...3 2.1 Edit a document...3 2.2 Create a New Document...3
More informationSupplemental setup document of CE Connector for IoT
Supplemental setup document of CE Connector for IoT Download (https://jazz.net/downloads/ce4iot-connector/releases/0.9.0.1?p=alldownloads) 1. Just download only zip file (CE4IoTTechnicalPreview V0.9.0.1.zip).
More informationLab Guide for Managing Hitachi Storage With Hitachi Command Suite v8.x
Lab Guide for Managing Hitachi Storage With Hitachi Command Suite v8.x TSI2565 Courseware Version: v2.0 Microcode Version: Hitachi Command Suit v8.5 Table of Contents Lab 1 Installation 1-1 Lab 2 Initial
More informationWindows 8.1 User Guide for ANU Staff
Windows 8.1 User Guide for ANU Staff This guide has been created to assist with basic tasks and navigating Windows 8.1. Further tips for using Windows 8.1 can be found on the IT Services website, or by
More informationHow to Add and Remove Permissions to Your Page
How to Add and Remove Permissions to Your Page Introduction: User Privileges This chart displays the different PEPFAR SharePoint user roles and permissions. Review this chart to understand what ability
More informationUsing File Cabinet In OwlNet
Navigating to the File Cabinet Using File Cabinet In OwlNet You may want to display the File Cabinet for any of the following reasons: To browse the items stored there. To organize saved items into folders.
More informationCOMMUNITIES USER MANUAL. Satori Team
COMMUNITIES USER MANUAL Satori Team Table of Contents Communities... 2 1. Introduction... 4 2. Roles and privileges.... 5 3. Process flow.... 6 4. Description... 8 a) Community page.... 9 b) Creating community
More informationAdding Content to your Personalised Page
Having prepared the layout of your personalised page, you now need to populate it with the relevant content. Content cannot be added unless the layout is already set up. Refer to Creating a Personalised
More informationUPGRADE INSTALLATION PROCEDURES
UPGRADE INSTALLATION PROCEDURES SIS-TECH Applications is proud to provide you with the new SIL Solver Version 6.0! You will be sent an email from svogtmann@sis-tech.com titled Files have been shared with
More informationDesigning Adhoc Reports
Designing Adhoc Reports Intellicus Web-based Reporting Suite Version 4.5 Enterprise Professional Smart Developer Smart Viewer Intellicus Technologies info@intellicus.com www.intellicus.com Copyright 2009
More informationLab 9: Identify Alerts That Require a Change of State
Lab 9: Identify Alerts That Require a Change of State In this lab you will work with your consolidated error data stream to work out which alerts require a change of state, and which change of state is
More informationManaging Your Website with Convert Community. My MU Health and My MU Health Nursing
Managing Your Website with Convert Community My MU Health and My MU Health Nursing Managing Your Website with Convert Community LOGGING IN... 4 LOG IN TO CONVERT COMMUNITY... 4 LOG OFF CORRECTLY... 4 GETTING
More informationLab - System Restore in Windows 8
Lab - System Restore in Windows 8 Introduction In this lab, you will create a restore point and use it to restore your computer. Recommended Equipment A computer running Windows 8 Step 1: Create a restore
More informationCauseway ECM Team Notifications. Online Help. Online Help Documentation. Production Release. February 2016
Causeway ECM Team Notifications Online Help Production Release February 2016 Causeway Technologies Ltd Comino House, Furlong Road, Bourne End, Buckinghamshire SL8 5AQ Phone: +44 (0)1628 552000, Fax: +44
More informationEnterprise 3.4 RC1. Managing Alfresco Content from within Microsoft Office
Enterprise 3.4 RC1 Managing Alfresco Content from within Microsoft Office Contents Copyright... 3 Typographic conventions...4 Introduction... 5 System requirements and prerequisites...5 Get started...6
More informationManage and Generate Reports
Report Manager, page 1 Generate Reports, page 3 Trust Self-Signed Certificate for Live Data Reports, page 4 Report Viewer, page 4 Save an Existing Stock Report, page 7 Import Reports, page 7 Export Reports,
More informationCollabNet TeamForge 5.3 Evaluator s Guide
CollabNet TeamForge 5.3 Evaluator s Guide Thank you for evaluating CollabNet TeamForge 5.3. This Evaluator s Guide will help you experience the key features of CollabNet TeamForge by walking you through
More informationClick on OneDrive on the menu bar at the top to display your Documents home page.
Getting started with OneDrive Information Services Getting started with OneDrive What is OneDrive @ University of Edinburgh? OneDrive @ University of Edinburgh is a cloud storage area you can use to share
More informationHGC SUPERHUB HOSTED EXCHANGE
HGC SUPERHUB HOSTED EXCHANGE EMAIL OUTLOOK WEB APP (OWA) 2010 USER GUIDE V2013.6 HGC Superhub Hosted Email OWA User Guide @ 2014 HGC. All right reserved. Table of Contents 1. Get Started... 4 1.1 Log into
More information5. A small dialog window appears; enter a new password twice (this is different from Dori!) and hit Go.
Installing Wordpress from JMA Lab to JMA Server 1. Take note these instructions are streamlined for the JMA lab they can t be performed in this fashion from home! 2. Wordpress is a database driven web
More informationBlueMix Hands-On Workshop Lab A - Building and Deploying BlueMix Applications
BlueMix Hands-On Workshop Lab A - Building and Deploying BlueMix Applications Version : 4.00 Last modification date : 13 June 2014 Owner : IBM Ecosystem Development Table of Contents Part 1: Building
More informationEMS MASTER CALENDAR User Guide
EMS MASTER CALENDAR User Guide V44.1 Last Updated: May 2018 EMS Software emssoftware.com/help 800.440.3994 2018 EMS Software, LLC. All Rights Reserved. Table of Contents CHAPTER 1: Introduction to the
More informationFunction. Description
Function Check In Get / Checkout Description Checking in a file uploads the file from the user s hard drive into the vault and creates a new file version with any changes to the file that have been saved.
More informationEnterprise Architect. User Guide Series. Model Exchange. Author: Sparx Systems. Date: 26/07/2018. Version: 1.0 CREATED WITH
Enterprise Architect User Guide Series Model Exchange Author: Sparx Systems Date: 26/07/2018 Version: 1.0 CREATED WITH Table of Contents Model Exchange 3 Copy Packages Between Projects 4 XMI Import and
More informationWEB CREATOR FILE MANAGER
WEB CREATOR FILE MANAGER TABLE OF CONTENTS TABLE OF CONTENTS... 2 ADMINISTRATIVE PERMISSIONS... 3 ACCESSING WEBSITE SETTINGS... 3 FILE MANAGER... 3 Accessing File Manager... 3 Views... 4 Actions... 4 FOLDER
More informationSUPERHUB OFFICE 365 OUTLOOK POP3 SETUP GUIDE
SUPERHUB OFFICE 365 OUTLOOK POP3 SETUP GUIDE 2018 Superhub Limited. All right reserved. Table of Contents 1. Get Started... 3 2. Add New Account... 5 3. Get Help and Support... 10 The guide is to describe
More informationToolkit Activity Installation and Registration
Toolkit Activity Installation and Registration Installing the Toolkit activity on the Workflow Server Install the Qfiche Toolkit workflow activity by running the appropriate SETUP.EXE and stepping through
More informationUSER GUIDE MADCAP LINGO Source Control: Git
USER GUIDE MADCAP LINGO 10.1 Source Control: Git Copyright 2018 MadCap Software. All rights reserved. Information in this document is subject to change without notice. The software described in this document
More informationBuild the application using Rational Build Forge
Build the application using Rational Build Forge In this lab, as the Build Engineer, you will run a formal build of Release 2.0 of the RatlBankWeb application. After the build completes, you will be able
More informationTechnical Documentation Version 7.3 Scenario Management
Technical Documentation Version 7.3 Scenario Management These documents are copyrighted by the Regents of the University of Colorado. No part of this document may be reproduced, stored in a retrieval system,
More information10ZiG Technology. 10ZiG Manager Getting Started Guide. Page 1
10ZiG Technology 10ZiG Manager Getting Started Guide Page 1 10ZiG Manager Getting Started 10ZiG Technology Limited Headquarters US 2012 W Lone Cactus Dr Phoenix, AZ 85027 Phone 866-864-5250 Fax 623-516-8697
More informationQuick Start Guide for Windows
for Windows The Eudora 5.1 User Manual for Windows is on the Eudora CD included in the product box. If you prefer a printed and bound copy, you can purchase one from www.eudora.com or call 1-800-2-EUDORA
More informationPatrice M. Anderson Instructional Designer
Patrice M. Anderson Instructional Designer Portfolio Sample Instructor-Led Training This sample contains the ToC and one chapter from the instructor-led student workbook for HP Quality Center (QC) software.
More informationShow all text and icon decorations Preferences->Team->IBM Rational ClearTeam Explorer->ClearCase decorations: Enable Text and Icon Decorations
CTE Startup Guide This guide provides a glimpse into the IBM Rational ClearTeam Explorer (CTE). We will present a number of IBM recommended preferences and practices as well as demonstrate a variety of
More informationDocument Container Guide
PRESENCE Document Container Guide SchoolMessenger 100 Enterprise Way, Suite A-300 Scotts Valley, CA 95066 888-527-5225 www.schoolmessenger.com Contents Introduction... 3 Key Information... 3 Create a Document
More informationMicrosoft Windows SharePoint Services
Microsoft Windows SharePoint Services SITE ADMIN USER TRAINING 1 Introduction What is Microsoft Windows SharePoint Services? Windows SharePoint Services (referred to generically as SharePoint) is a tool
More informationCONFIGURING SAFE V4.0 IN THE IBM COLLABORATIVE LIFECYCLE MANAGEMENT
CONFIGURING SAFE V4.0 IN THE IBM COLLABORATIVE LIFECYCLE MANAGEMENT Abstract In this document, we provide step-by-step guidance to configure support for the SAFe V4.0 methodology in CLM tooling. Amy Silberbauer
More informationGroup Admin Guide. NetBrain Consultant Edition 6.2
NetBrain Consultant Edition 6.2 Group Admin Guide Version 6.2 Last Updated 2017-08-16 Copyright 2004-2017 NetBrain Technologies, Inc. All rights reserved. Contents 1. Overview... 3 2. Logging in to Admin
More informationRemedy OnDemand: Analytics Content Promotion
Remedy OnDemand: Analytics Content Promotion Analytics Content Promotion The BMC Analytics for Business Service Management (BMC Analytics for BSM) application provides outof-the-box interactive reporting
More informationBaselining Requirements Assets with Rational RequisitePro and Rational ClearCase. A Rational Software White Paper
Baselining Requirements Assets with Rational RequisitePro and Rational ClearCase A Rational Software White Paper Table of Contents Introduction... 1 Overview... 2 Creating a new versioned Rational RequisitePro
More informationInstalling Intellicus DotNet Client on Windows. Version: 16.0
Installing Intellicus DotNet Client on Windows Version: 16.0 Copyright 2015 Intellicus Technologies This document and its content is copyrighted material of Intellicus Technologies. The content may not
More informationHTML REPORT VIEWER. Intellicus Enterprise Reporting and BI Platform. Intellicus Technologies
HTML REPORT VIEWER Intellicus Enterprise Reporting and BI Platform Intellicus Technologies info@intellicus.com www.intellicus.com HTML Viewer i Copyright 2012 Intellicus Technologies This document and
More informationProlog Converge Login
Prolog Converge Login INTRODUCTION Capital Regional District uses Prolog software to manage the CAWTP program. Prolog Converge is a Web-based project management application that allows efficient collaboration
More informationemam and Adobe Premiere Panel Guide
emam and Adobe Premiere Panel Guide Version 3.8 April, 2017 Notice The content in this document represents the current view of Empress Media Asset Management, LLC as of the date of publication. As Empress
More informationOrganize Mail into Folders
Organize Mail into Folders In an effort to organize all of the emails that you receive, you can create mail folders to store them in. One email can be stored in multiple folders. Click the + next to Folders
More informationECITE Cloud Platform User Manual. User Manual. AWS Platform. Powered By Dynamic Computing Cloud (DC2)
User Manual EarthCube Integration and Test Environment Hybrid Cloud Platform AWS Platform Powered By Dynamic Computing Cloud (DC2) 1 Content Preface... 5 1. Basic Operation... 6 1.1 Login... 6 1.2 User
More informationUSER GUIDE MADCAP FLARE SharePoint
USER GUIDE MADCAP FLARE 2018 SharePoint Copyright 2018 MadCap Software. All rights reserved. Information in this document is subject to change without notice. The software described in this document is
More informationWA2168 Introduction to Java using Rational Application Developer 8.5. Classroom Setup Guide. Web Age Solutions Inc. Web Age Solutions Inc.
WA2168 Introduction to Java using Rational Application Developer 8.5 Classroom Setup Guide Web Age Solutions Inc. Web Age Solutions Inc. 1 Table of Contents Part 1 - Minimum Hardware Requirements...3 Part
More informationInstallation guideline
STATISTIC SWEDEN Installation guideline Installing PX-Web 2008 on Windows7, IIS7 Peter Holm 2011-04-18 This is a first version of on guideline for installing PX-Web on Windows 7 and IIS7. Installation
More informationSharePoint AD Administration Tutorial for SharePoint 2007
SharePoint AD Administration Tutorial for SharePoint 2007 1. General Note Please note that AD Administration has to be activated before it can be used. For further reference, please see our Product Installation
More informationFarin Foresight/Insight RemoteApp Access Document last updated: 2/7/2017
1 P a g e Farin Foresight/Insight RemoteApp Access Document last updated: 2/7/2017 In the event of any questions or issues, please contact our Farin Client Care team: Farin Financial Risk Management: 866-230-2161
More informationEktron Advanced. Learning Objectives. Getting Started
Ektron Advanced 1 Learning Objectives This workshop introduces you beyond the basics of Ektron, the USF web content management system that is being used to modify department web pages. This workshop focuses
More informationPerforce Installation Guide (v0.4) by Qiang Wei
Perforce Installation Guide (v0.4) by Qiang Wei This document provides a simple instruction on how to install perforce in Windowsbased PC. There is also an FAQ in the LERSSE Portal: https://lersse.ece.ubc.ca/tikiview_faq.php?faqid=4
More informationGetting Started with IBM Cognos 10 Reports
UNIVERSITY OF SUSSEX Getting Started with IBM Cognos 10 Reports ITS CIS 9/2/2015 Introduction to some of the features in the Cognos Connection reporting portal. Guides users through initial configuration
More informationIBM Atlas Policy Distribution Administrators Guide: IER Connector. for IBM Atlas Suite v6
IBM Atlas Policy Distribution Administrators Guide: IER Connector for IBM Atlas Suite v6 IBM Atlas Policy Distribution: IER Connector This edition applies to version 6.0 of IBM Atlas Suite (product numbers
More information