Communication. Features. Device variant. Copyright 2017, Builder: , Time: 06:40:09

Transcription

1 Version V.3.4. Release date Copyright 27, Builder: 4..., Time: 6:4:9 DI Vendor ID Device ID Vendor name Vendor text Vendor URL 3 / x36 - s: 54 / x x36 9 / x38f - s: 3 43 / x x3 x8f ifm electnic gmbh Communication IO-Link revision Bit rate Minimum cycle time SIO mode supported Features Block parametrization Data storage V. COM2 3.2 ms Yes Yes Yes Device variant DI527 DI528 DI529 DI53 Speed Monitor Speed Monitor Speed Monitor Speed Monitor Page

2 Pcess data (Pcess data input) Total bit length = 32 Description Bit length Revolution Current revolution value 6 to 3 (-3276) UL (3276) OL (32764) NoData /min Device status Current device status, a copy of the variable [Device Status] in the pcess data channel 4 () Device is OK () Maintenance required (2) Out of specification (3) Functional check (4) Failure Target Indicates a detected target (false) No target detected (true) Target detected SSC2 Status depends on SSC2-Config.Logic and SSC2-Config.Mode (false) inactive (true) active SSC Status depends on SSC-Config.Logic and SSC-Config.Mode (false) inactive (true) active Page 2

3 Standard Command 2 Sub wo (3) Restore Factory Settings (65) Teach SP (66) Teach SP2 (28) BACKGROUND-COMPENSA- TION (24) IO-Link. system test command 24, Event 8DFE appears (24) IO-Link. system test command 24, Event 8DFE disappears (242) IO-Link. system test command 242, Event 8DFF appears (243) IO-Link. system test command 243, Event 8DFF disappears Device Locks 2 Sub 6 Bit Data Storage bitoffs Bit (false) (false) Unlocked (true) Locked Vendor 6 Sub max 9 ifm electnic gmbh Vendor Text 7 Sub max Pduct 8 Sub max 6 Page 3

4 Pduct ID 9 Sub max 6 Pduct Text 2 Sub max 3 Speed Monitor Serial Number 2 Sub max 2 Hardware Version 22 Sub max 32 Firmware Version 23 Sub max 3 Application Specific Tag 24 Sub max 32 *** Device Status 36 Sub () Device is OK () Device is OK () Maintenance required (2) Out of specification (3) Functional check (4) Failure 5 to 255 (Reserved) Detailed Device Status 37 Sub ArrayT 24 h Page 4

5 TI Select Teach selection 58 Sub () SSC () SSC (2) SSC2 TI Result Teach result 59 Sub State, Current teach state bitoffs 4 Bit () Idle () Idle () SP Success (2) SP2 Success (5) Busy (7) Err SSC Param Switching signal channel, parameter 6 SP, Setpoint Sub 6 Bit (5) 5 to 24 /min SP2, Setpoint 2 Sub 2 6 Bit (3) 3 to 26 /min SSC Config Logic, Setpoint logic / State for target detected Mode, Setpoint mode Hyst, Setpoint hysteresis Switching signal channel, configuration 6 Sub Sub 2 Sub 3 6 Bit () High active () Single point () % () High active () Low active () Single point (2) Window (3) Two point () % Page 5

6 SSC2 Param Switching signal channel 2, parameter 62 SP, Setpoint Sub 6 Bit (5) 5 to 24 /min SP2, Setpoint 2 Sub 2 6 Bit (3) 3 to 26 /min SSC2 Config Logic, Setpoint logic / State for target detected Mode, Setpoint mode Hyst, Setpoint hysteresis Switching signal channel 2, configuration 63 Sub Sub 2 Sub 3 6 Bit () High active () Single point () % () High active () Low active () Single point (2) Window (3) Two point () % SSC Switch-On delay Switchching signal channel, Switch-On delay 37 Sub 6 Bit to 6 ms SSC Switch-Off delay Switchching signal channel, Switch-Off delay 37 Sub 6 Bit to 6 ms SSC2 Switch-On delay Switchching signal channel 2, Switch-On delay 372 Sub 6 Bit to 6 ms SSC2 Switch-Off delay Switchching signal channel 2, Switch-Off delay 373 Sub 6 Bit to 6 ms Teach offset Sets an offset between setpoint and current pcess data value 383 Sub 6 Bit 8 to 2 % Page 6

7 P-n Output polarity for the switching outputs 5 Sub () PnP () PnP () npn Power cycles Number of power cycles since delivery 54 Sub to Operating hours Counter of the operating hours since delivery 542 Sub to h Active Events Bit mask for current pending events 545 Sub Bit_3, Bit 3 indicates the assigned pending event bitoffs 3 Bit () noev () noev () x8dff Bit_3, Bit 3 indicates the assigned pending event bitoffs 3 Bit () noev () noev () x8dfe Bit_9, Bit 9 indicates the assigned pending event bitoffs 9 Bit () noev () noev () x8c3 Bit_8, Bit 8 indicates the assigned pending event bitoffs 8 Bit () noev () noev () x8c Bit_, Bit indicates the assigned pending event bitoffs Bit () noev () noev () x5 Page 7

8 Param configuration fault Displays the wngly set parameters 546 Sub ArrayT * () OK (3888) TI-Select (39326) SSC-Param (39326) SSC-Param.SP (393262) SSC-Param.SP2 ( ) SSC-Config ( ) SSC-Config.Logic ( ) SSC-Config.Mode ( ) SSC-Config.Hyst (463232) SSC2-Param (463233) SSC2-Param.SP (463234) SSC2-Param.SP2 (428768) SSC2-Config (428769) SSC2-Config.Logic (42877) SSC2-Config.Mode (42877) SSC2-Config.Hyst ( ) SSC_dS ( ) SSC_dr ( ) SSC2_dS ( ) SSC2_dr (32768) P-n (25288) Teach ( ) ParaConfigFaultCollection (968468) dst ( ) PrSC Page 8

9 dst Delay Startup 33 Sub 6 Bit 5 to 3 ms PrSC Prescaler, Indicates the number of targets to calculate current revolution 47 Sub 6 Bit to 99 MDC Descr Description of the measurement data channel lowerlimit, Lower value measurement range Sub () () upperlimit, Upper value measurement range Sub 2 (3) 3 (3) 3 unitcode, code of the measurement data Sub 3 6 Bit () (83) /min scale, Range shifting ( scale) Sub 4 () () Events Code 248 d / 5 h d / 8C h d / 8C 3 h 3635 d / 8D FE h Device hardware fault, Device Status = 4 (Failure) Pcess variable range over-run, Device Status = 2 (Out of specification) Pcess variable range under-run, Device Status = 2 (Out of specification) Test Event. Device Status = (Maintenance required) Type Err Warning Warning Warning Description Device Exchange Pcess data uncertain. Note: This Event will not be transmitted via IO-Link Event mechanism. It is only available by reading 37 (DetailedDeviceStatus) oder 545 (BitCoded_ActiveEvents) Pcess data uncertain. Note: This Event will not be transmitted via IO-Link Event mechanism. It is only available by reading 37 (DetailedDeviceStatus) oder 545 (BitCoded_ActiveEvents) Event appears by setting index 2 to value 24, Event disappears by setting index 2 to value 24 Page 9

10 Events Code Type Description 3635 d / 8D FF h Test Event 2. Device Status = (Maintenance required) Warning Event appears by setting index 2 to value 242, Event disappears by setting index 2 to value 243 Err types Err code d / 8 h d / 8 h d / 8 2 h 328 d / 8 2 h 3283 d / 8 23 h 3286 d / 8 3 h 3289 d / 8 33 h 3282 d / 8 34 h 3282 d / 8 35 h d / 8 36 h d / 8 4 h d / 8 4 h d / 8 82 h Device application err - no details not available not available Service temporarily not available denied Parameter value out of range Parameter length overrun Parameter length underrun Function not available Function temporarily unavailable Invalid parameter set Inconsistent parameter set Application not ready Description Service has been refused by the device application and no detailed information of the incident is available occurs to a not existing index occurs to a not existing subindex Parameter is not accessible due to the current state of the device application Write access on a read-only parameter Written parameter value is outside its permitted value range Written parameter length is above its predefined length Written parameter length is below its predefined length Written command is not supported by the device application Written command is not available due to the current state of the device application Written single parameter collides with other actual parameter settings Parameter inconsistencies were found at the end of block parameter transfer, device plausibility check failed Read or write service is refused due to a temporarily unavailable application Page