QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 461.0 976 32 10 Compatible rtc 0.0 rtc 1.0 rtc 3.0 rtc 450.0 rtc 451.0 Temperature Range Nitrile (N) FPM (V) EPDM

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 41.0 97 24 32 10 Compatible rtc 170.0 rtc 171.0 rtc 173.0 rtc 450.0 rtc 451.0 Temperature Range Nitrile (N) FPM (V)

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 464.0 976 32 10 Compatible rtc 013 Nitto Kohki & & 40 Cejn 315 Rectus 13 Temperature Range Nitrile (N) FPM (V) EPDM

QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 40.0 97 24 32 10 Compatible Ind. Interchange 1/4 rtc 023 Cejn 310 Parker B23 Rectus 23 Foster 3003 AMFO C8 Hansen

I Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:43 PM Full compatibility with most popular plug systems Plug form 1:1 Nominal Bore SC Series Standards Compatible with* Information Page 6mm

Katalog SC OENA ESEN_OE Prospekt SC Layer USA /23/12 4:42 PM Page 1. Swing Couplings SC

Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:42 PM Page 1 s SC Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:42 PM Page 2 2-3 4-5 6 7 8-9 10 11 12 13 14 15 16 17 18 19 21 22 23

COUPLING TECHNOLOGY. Water Pneumatic Hydraulic Electrical TYPE

COUPING TECHNOOGY Water Pneumatic Hydraulic Electrical Accessories 0 0 COUPING TECHNOOGY 0 QUICK COUPINGS / SCHNEKUPPUNGEN COUPING TECHNOOGY General information - Allgemeine Informationen 0 Temperature

QUICK CONNECT TECHNOLOGY

Water Pneumatic Hydraulic Electrical Accesories M101 rtc Multicoupling systems rtc Multikupplungssysteme type M101 152 Flow diameter 9 mm / Nennweite 9 mm 3 3 Mobile side / Versorgerseite -06 SHB 10-06

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid

Non-Drip Quick Connect Couplings

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application ^ Innovative Products for Demanding Applications Innovative Couplings for Fluid Applications

pneumatic push-in fittings system LF 3000

pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329

RMI multi-couplings. Temperature control

RMI multi-couplings Temperature control Centralised s... Registered Community Design... for greater implementation speed A full range The multi-coupling range is composed of four main families corresponding

RMI multi-couplings Temperature control

RMI multi-couplings Temperature control Centralised s... New models Even more efficient. Applications ew features to discover on pages N 6 and 7. Even better performance ptimum mechanical strength and

SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet

SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm

RMI multi-couplings Control

RMI multi-couplings Control Centralised connections for greater implementation speed Centralised connection of control circuits Optimised time for changing moulds Streamlined connections. Efficient and

FF Series (Steel) ISO Interchange

Eaton s FF Series flat face is specifically designed for those applications where quick and easy connections and no-spill performance are essential. The FF Series is ideal for use when global interchangeability

RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment

RMI-RMP L100.05 us B RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment STÄUBLI CORPORTION P.O. BOX 189 - DUNCN - S.C. 29334 PHONE 864/433-1980 TOLL-FREE NUMBER

Ring lock design prevents accidental disconnection To disconnect rotate sleeve 20 degrees. Standard body material: Zinc trivalent plated steel

2RL/3RL Series Eaton s 2RL/3RL ring lock series quick disconnect pneumatic couplings have a unique interchange which Eaton designed for use with compressed air. Product Features High Flow capacity Push

LCD 500,1500. Spare parts list. Handheld core drills. Valid from serial number Construction Tools PC AB No

LCD 500,1500 Spare parts list Handheld core drills LCD 500 LCD 500 LCD 1500 Valid from serial number BGF0006875 BGF0006875 BGF0006875 2015 Construction Tools PC AB No. 3392 5193 01 2015-06 General information

Hydraulic Quick Couplings General Purpose

Manual Sleeve, Unvalved Snap-tite H Series couplings have been proven by years of use on hydraulic applications. H Series is best suited for general purpose fluid applications where either single or double

UNITED STATES MEXICO CANADA

www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.

Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.

Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page

Compression fittings Metric and inch

Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.

RMI Temperature control

RMI Temperature control 7 nominal diameters... hot and cold water, glycol water and heat transfer fluid circuits temperature control on injection presses Safe and quick locking A large number of locking

QUICK COUPLINGS. Industrial Interchange. Automotive Interchange. Lincoln Interchange. Aro Interchange

QUICK COUPLINGS For easy identification of popular pneumatic quick couplings use these actual size silhouettes Industrial Interchange Automotive Interchange Lincoln Interchange Aro Interchange 120 QUICK

BSP & HOSE Fittings M5, 1/8... 1

SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors

PNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages

PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages

Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)

411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption

QUICK RELEASE COUPLINGS

QUICK RELEASE COUPLINGS Cross Reference C.01 Catalogue C.3 ~ C13 Quick Release Couplings Interchange Chart PART NO Series Page Faster Parker Aeroquip Safeway DNP Ryco Stucci Hansen Tema QOV C.03 NV 4000

RMI multi-couplings Control

RMI multi-couplings Control Centralised connections for greater implementation speed Centralised connection of control circuits optimised time for changing moulds streamlined connections. Efficient and

Electromechanical pressure switches

Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.

SPH/BA Motorsports. Clean-break couplings for high pressure circuits

SPH/BA Motorsports Clean-break couplings for high pressure circuits Choose SPH/BA couplings... Applications - shock absorbers, brake and hydraulic lines - lubrication and coolants Combine lightweight and

Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines.

HPX Hydraulics Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines. Non-spill, flush face design With non-spill flush faces, the HPX connector prevents

Quick Coupling Products

Quick oupling Products Quick ouplings, Swivels, Valves, iagnostic Equipment atalog 3800 US February 2014 Quick oupling ivision Locations Grantsburg, WI hetek, WI Union ity, P FILURE OR IMPROPER SELETION

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group

Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability

HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215

HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm

PNEUFIT 10 series Push-in fittings

PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for

Temperature Switches

ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,

brass compression fittings

compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube

Series 95000, 2/2 Direct solenoid actuated poppet valve

> Port size: /4 (ISO G or NPT), G/ > Working from 0 bar up > Short switching times > Suited for fine vacuum down to,33 x 0 - mbar > For a.c. solenoid systems with integrated rectifier (40... 60 Hz) > Variable

15 and 16 Series BSP and hose fittings

SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical

Quality, Precision and Unbeatable Value!

PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic

95100, 2/2 (stainless steel) Direct solenoid actuated poppet valves

9500, / (stainless steel) > > Port size: G/8, G/4, /4 NPT > > Working from 0 bar up > > Assembled free of oil and grease > > Suited for fine vacuum down to,33 0 - mbar > > For a.c. solenoid systems with

1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.

LUG TYPE BUTTERFLY VALVE -A TECHNICAL DATA Nominal diameter: da ( ) - da ( ) (SDR ) da ( ) - da ( ) (SDR (SDR / SDR, / SDR ) Face-to-face: EN 55 Series (DIN 32 T3 K1) ISO 5 Series API 09 Table 1 BS 55

ACCESSORIES. Accessories for distance and position sensors Magnets for HLT 1000, HLT 2000, HNT Electrical accessories HLT

Accessories ACCESSORIES Accessories to suit every sensor! Whether it's electrical connectors, mechanical adapters or the instrument mounting clamps, the wide range of products from HYDAC offers solutions

Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI

Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,

MULTI ROTARY SWITCH MR50

MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design

Inductive Cylinder Position Sensors

Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs

10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads

0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated

ICO3S - 2/2, 3/2 or 5/2 poppet valves Electromagnetically actuated, direct solenoid operated

ICOS - /, / or / poppet valves > > Port size: /... / (ISO G / NPT) Namur or manifold > > Control of pneumatic or hydraulic operated equipment > > Direct acting solenoid valve > > High flow > > bar inlet

ICO4S 2/2, 3/2 or 5/2 poppet valves electromagnetic actuated, directly controlled

ICO4S /, / or 5/ poppet valves > > Port size: /4... /4 (ISO G/NPT) or manifold version > > Reliable and long life, ideal for a one time installation > > Direct acting solenoid valve for the control of

RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No

RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description

Spare parts list. Handheld pneumatic pick hammers CP 0222 CHIT, CP 0222 CHIT BS, CP 0222 CHOT BS.

Spare parts list Handheld pneumatic pick hammers CP 0 CHIT, CP 0 CHIT, CP 0 CHOT www.cp.com CP 0 CHIT, CP 0 CHIT, CP 0 CHOT 9800 00 0 CP 0 CHIT, CP 0 CHIT, CP 0 CHOT Contents Contents General information...............................................................

Operating pressure (bar) kv factor (m 3 /h) *3)

/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar

10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads

0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated

Cable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof

757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP

1COMPRESSION FITTINGS

SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and

V88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability

oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil

DN40 (1 1/2") - DN200 (8") Hot Tappings

DN40 ( /2") - DN200 (8") Hot Tappings TONISCO B30 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN40 DN200 by completing it with proper adapters.

V88 series Redundant valve manifold systems - Semi modular 2oo2 Availability

oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless

MPreC - Pressure Relief Device Order specification sheet

- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE

21023, 21025, 2/2 Direct solenoid actuated poppet valves

03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international

ISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves

*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control

Pipe Swivels. The Fitting Authority

Pipe Swivels The Fitting Authority 0507 007 007 3507 Straights 45 Elbows 307 307 507 5507 07 NPT / NPSM Swivel 90 Elbows 5607 NPT / NPSM Swivel Long Drop 07 077T NPSM Swivel / NPSM Swivel / NPSM Swivel

M12x1 Circular Connectors

M12x1 Circular Connectors Agenda 1. Introduction M12x1 Circular Connectors 2. M12x1 X-coded 3. M12x1 D-coded 4. Accessories and Nomenclature 3 / 2015 Product Presentation M12x1 Page 2 M12x1 Circular Connectors

Technical data. General specifications. Functional safety related parameters B 10d Electrical specifications Operating voltage U B

Model Number Cable pull rotary encoder with PROFI- NET interface Features Robust aluminum drum housing Drum travel when cable retracted using threaded spindle Bellows with steel tip Comprehensive accessories

Pipe fittings and flanges, sockets for bayonet locks

Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing

JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits

sales@jumo.co.uk info.us@jumo.net Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology

Insertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )

The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed

JOHN GUEST SPEEDFIT FITTINGS

G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE

1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA

DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01

Industrial Pressure Transmitter

NAT 8 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The industrial transmitter

DMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial

DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure

SERVICE PARTS MANUAL

SERVICE PARTS MANUAL MEGABLADE TM V-WING TM SERIES SNOW PLOW WITH SERIAL NUMBER AFTER MBV00000 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International, Inc. ProControl, MegaBlade,

Double piston cylinder, Series TWC Ø6-32 mm double-acting with magnetic piston cushioning: elastic

Bosch Rexroth AG Pneumatics Ambient temperature min./max. +0 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining piston forces

Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media.

Test 12 Connection Tread S12,65 x 1,5 Introduction SKK12 Test Coupling wit Piston Valve Test Coupling SKK12 Internal Piston Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast

Q-Flow product information. Variable area flowmeters for gases and liquids

Q-Flow product information Variable area flowmeters for gases and liquids MyScale Air mm ALU Attractive design and price: Variable area flowmeters Q-Flow The proven variable area flowmeter with compact,

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories

Compressed Air Systems Pneumatic Fittings LLDPE Tube

John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, England Tel: 01895 449233 Fax: 01895 420321. www.johnguest.com and are registered trademarks of John Guest International Limited Copyright

push-to-connect fittings system LF3000

legris products are available from: MARYAD MTRIS push-to-connect fittgs system 3000 Order from: Maryland Metrics email: techfo@mdmetric.com ph. (800)638-1830 fx. (800)87-939 prciple of system 3000 legris

Radiator Lockshield Valves ADN.. AEN..

07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated

pneumatic function valves

pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment

Accessories for Lubrication Systems Product Catalogue

Accessories for Lubrication Systems Product Catalogue Productivity is key in today s global economy. Proper lubrication increases uptime and makes maintenance routines simple. Accessories for Lubrication

37 Stainless Steel. A wide range of end configurations are suitable for many Hydraulic applications

JIC Prochem manufactures and supplies an extensive range of JIC Fittings and Adaptors in all configurations. 37 Stainless Steel Fittings Prochem 37 JIC Fittings and Adaptors provide a straightforward,

LF 3600 Nickel-Plated Brass Instant Fittings

aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 00 Nickel-Plated Brass Instant ittings One fitting for all industrial

MALE THREAD SPECIFICATIONS

MALE THREAD SPECIFICATIONS PARALLEL MALE THREADS M20 Thread type BSP-m BSP-m BSP-m BSP-m Metric Seal method ISO 1179-4 ISO 1179-4 ISO 1179-4 ISO 1179-4 ISO 9974-3 Designation thread ISO 228-1 ISO 228-1

M3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems

MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short

PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS.

MESSKO MPreC PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS. MESSKO MPreC -Series LARGE MESSKO PRESSURE RELIEF DEVICE (LMPRD) Operating pressure Project/Reference: Gasket material MPreC Typ 4 psi; 0.28

ISO*STAR - ATEX version (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves

*STR - TX version (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder

UPS-HSR. USB High Sample Rate. Pressure Sensor. Applications include, but not limited to: Product Highlights:

Product Highlights: Applications include, but not limited to: Pressure ranges from 2.5 up to 5,000 bar Accuracy

Digital electropneumatic Positioner for the integrated mounting on process control valves

Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8696 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact

Data is only for informational purpose. All specifications are subject to change without notice.

MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV

LLN Representative photograph, actual product appearance may vary.

Page 1 of 6 Representative photograph, actual product appearance may vary. Due to regional agency approval requirements, some products may not be available in your area. Please contact your regional Honeywell

80265 series, 3/2 Indirect solenoid actuated poppet valve

> > Port size: G/... G > > High flow rate > > Optionally air pilot operated > > High repeatability of switching time > > Variable valve solenoid combination Technical features Medium: Compressed air, filtered,

MDT 2000 Magnetostrictive linear position transducer

Description MDT 2000 is a magnetostrictive linear displacement transducer. The position value is obtained by measuring the flight time elapsed between an electrical pulse, sent in a special waveguide,

FISCHER MINIMAX TM SERIES

TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases

FILTER NAME CONSTRUCTION FEATURES APPLICATIONS ORDER CODE MEMBRANE Body: polycarbonate Filter: PTFE membrane

Filter Caps for Humidity and Dewpoint Transmitters with probe 12 mm (0.47 ) The right choice of appropriate filter cap is essential for best long term performance in the application. For assistance please

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA

UG TYPE BUTTERFY VAVE Z 04-A ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T

Control Head for the integrated mounting on process valves

Control Head for the integrated mounting on process valves Type 8695 can be combined with Compact stainless steel design Integrated analog valve position registration (Teach function) Coloured illuminated