In Process1 we shall make Text data file SURVEY.TXT, next we shall Export file GROUND.GEN containing various strings as obtained from Layer names.
|
|
- Maude Bruce
- 5 years ago
- Views:
Transcription
1 ================================== HEADS Rail Release 14.1, User s Guide for Tutorial Data Tutorial 02 Drawing to Data to DTM to Contours ================================== USER's Guide for Total Station Survey Data available as 3D AutoCAD drawing from real life design project. Total Station Survey data in AutoCAD drawing format exists in the Folder Tutorial 02 Drawing to Data to DTM to Contours\Survey Drawing\ SURVEY.DWG. The drawing must be in 3D and should not contain Blocks, In Process1 we shall make Text data file SURVEY.TXT, next we shall Export file GROUND.GEN containing various strings as obtained from Layer names. In Process2 We shall create Survey data file GROUND.GEN, then model files MODEL.FIL & MODEL.LST containing various strings as obtained from Layer names, then Ground Modeling by Triangulation and Finally Contours. Process 1: The folder Survey Drawing inside it, Total Station Survey data in AutoCAD drawing format. Using Heads Rail Menu Option File>>Open, Select All Files, Select the file SURVEY.DWG, Click on Open, 1
2 The file will be opened in Heads Viewer or in AutoCAD, If the Heads Viewer is not opened then Select menu option Viewing>>Interactive Drawing, As the Heads Viewer opens, use menu option File>>Open, Select file SURVEY.DWG from the above mentioned folder, 2
3 Select Heads Viewer menu option Draw>>Drawing to Data in Files, The message may come as: Use Heads Viewer menu bar and click on icon as marked to shrink the drawing 3
4 Click the two diagonally opposite corners to select the whole drawing, Click the right mouse button, The Dialog Box comes as shown below, the Layer names are displayed in the list, the String Labels may be mentioned by the user, or String labels will be the same as Layer names by default, Click on button Save As, 4
5 Type the File name as SURVEY, Save as type Space ( ) Separated Files [*.txt], Click on button Save, The file SURVEY.txt will be saved in the working folder and may be opened in Notepad, Click on button Close of the Dialog Box as shown below, 5
6 The output files created as SURVEY.TXT holding all line and Polyline features and Text_Data.txt holding various Text data (For example: Contour elevations etc.), Using Heads Pro Menu Option File>>Open, Select All Files, Select the file SURVEY.TXT, Click on Open, 6
7 The file SURVEY.TXT may be opened in Notepad, Minimize or close Notepad, Select Heads Pro menu option Utilities>>Format Data as 2D/3D DGM File, As the Dialog box comes for Format Data as 2D/3D DGM File, Click on button Make Feature Continuous and WRITE TO GEN FILE, 7
8 As the process starts, Click on Proceed, when the process is over click on OK & Finish, The output GENIO file is created as SURVEY.GEN, The file SURVEY.GEN may be opened in Notepad, 8
9 Process 2: Select Heads Viewer menu option DesignUtils>>Drawing to Model File, The message may come as shown below, Click on button OK, Click the two diagonally opposite corners to select the whole drawing, Click the right mouse button, 9
10 The Dialog Box comes as shown below, the Layer names are displayed in the list, the String Labels may be mentioned by the user, or String labels will be the same as Layer names by default, Click on button Save As, The file SURVEY.txt will be saved in the working folder and may be opened in Notepad, Click on button Close of the Dialog Box as shown below, 10
11 Select Heads Viewer menu option File>>New, this opens a new screen, Select Heads Viewer menu option File>>Draw String, this opens a new screen, 11
12 The Draw String Dialog box appears as shown below, the model name GROUND is currently selected, Click on button Select All to select all the string labels, The Strings LOTS, HOUSE, ROAD & DRAIN under model GROUND are drawn on the screen, this confirms that the model is alright, 12
13 Using Heads Pro Menu Option File>>Open, Select All Files, Select the file MODEL.FIL, Click on Open, Select Heads Pro menu option Utilities>>Export as GENIO File, 13
14 As the Dialog box comes for Export as GENIO File, the Standard Model String option is already selected, the model GROUND the strings related strings LOTS, P0, HOUSE, ROAD & DRAIN are all listed, Click on button Select All to select all the strings, Click on OK, The process starts, Click on button Proceed, as the process is over click on button OK & Finish, 14
15 The GNIO file is created as NEWFILE.GEN in the working folder, The file NEWFILE.GEN may be opened in Notepad to view the contents, 15
16 The file MODEL.FIL is currently selected in Heads Rail, Select Heads Rail main screen menu option DGM>>Ground Modeling [Triangulation], The various Survey Features which are stored as string labels in the model files are already selected, Click on button OK, 16
17 As the process starts Click on buttons Proceed, when the process finishes click on buttons OK, the output is written in files HDS000.FIL, HDS001.FIL & Contour.FIL the DTM files will be used in various future process for design to get the ground elevations, Select Heads Rail main screen menu option DGM>>Contour Modeling, 17
18 The various Survey Points in 3D will be taken from DTM files, the interval of elevations for primary contours C001 is mentioned as 1.0m, the interval of elevations for secondary contours C005 is mentioned as 5.0m, (always five times of interval of primary contours) and Elevation values as Text string ELEV at an interval of 5.0m. If the ground is relatively flatter then contour elevations may be given as 0.1m, 0.5m and 0.5m in Contour Data in file Project Data.txt, Click on button RUN, As the process is over click on button Save, the Contour are saved under Model Name CONTOUR and String Labels C001, C005 & ELEV in model files MODEL.FIL & MODEL.LST, Maximize the icon for Contour RUN/QUIT from the bottom of the screen as shown below, 18
19 Click on button QUIT to close the Contour window, Select Heads Rail main screen menu option Viewing>>Interactive Drawing, As the Heads Viewer opens select menu option Format>>Layers Dialog, 19
20 As the Layers Dialog box comes, type Layer name as C001, Click on button New Layer, the Layer name C001 will come in the list below, Select the layer name by clicking on it, Click on button Set Current, From Heads Viewer menu option select File>>Draw String, 20
21 As the Dialog box comes for Draw String, Select Model Name CONTOUR, String Label C001, Click on button OK, The strings are drawn on the screen as shown below, 21
22 As the Heads Viewer opens select menu option Format>>Layers Dialog, As the Layers Dialog box comes, type Layer name as C001, Click on button New Layer, the Layer name C001 will come in the list below, Select the layer name by clicking on it, Click on button Set Current, From Heads Viewer menu option select File>>Draw String, 22
23 As the Dialog box comes for Draw String, Select Model Name CONTOUR, String Label C005 & ELEV, Click on button OK, The strings are drawn on the screen as shown below, Select Heads Viewer menu option File>>Save As and Save the drawing typing the name CONTOUR and Save as type DWG 2004, the drawing is saved as CONTOUR.DWG in folder Project Data, this finishes the current Tutorial Session. 23
24 TECHSOFT ENGINEERING SERVICES 179, BANGUR AVENUE, BLOCK - A, KOLKATA TEL: , , dataflow@mail.com, techsoft@consultant.com WEB SITE: 24
In Process1 we shall make Text data file SURVEY.TXT, next we shall Export file GROUND.GEN containing various strings as obtained from Layer names.
================================== HEADS Site Release 14.1, User s Guide for Tutorial Data Tutorial 02 Drawing to Data to DTM to Contours ================================== USER's Guide for Total Station
More informationUSER's Guide to run Project Data for Survey Data Mapping DTM Contours,
====================================== HEADS Rail Release 14.1, User s Guide for Tutorial Data Tutorial 01 Survey Data Mapping DTM Contours ====================================== USER's Guide to run Project
More informationTABLE 1 : WIDENING SCHEDULE
================================== HEADS Pro Release 14.1, User s Guide for Tutorial Data Tutorial 04 Highway Strengthening & Widening ================================== USER's Guide to run Project Data
More informationSelect ASTRA Pro menu item Process Design>>Bridge Design>>Working Folder, Select your working folder as Desktop>>WORK, Click on button OK,
====================================== ASTRA Pro Release 5.0, User s Guide for Tutorial Data Tutorial 01 Design of RCC T Girder Bridge ====================================== USER's Guide to run Project
More informationConvert AutoCAD files to ESRI ShapeFiles, to be used in Leica icon telematics
Convert AutoCAD files to ESRI ShapeFiles, to be used in 1 1 Convert AutoCAD files to ESRI ShapeFiles, to be used in Background When you use it is possible to log the machine's position and visualize this
More informationThis tutorial covers the basics of working importing scatter data into SMS and exporting SMS data as a text file.
v. 13.0 SMS 13.0 Tutorial Objectives This tutorial covers the basics of working importing scatter data into SMS and exporting SMS data as a text file. Prerequisites None Requirements Scatter Module Map
More informationSymbol Library - Overview
2018/12/25 12:23 1/5 Symbol Library - Overview Symbol Library - Overview In Novapoint Landscape there are common functions for handling conventional symbols. There are 3 variants. The function is general
More informationMigrating from Autodesk Land Desktop to Autodesk Civil 3D CV42-3L
December 2-5, 2003 MGM Grand Hotel Las Vegas Migrating from Autodesk Land Desktop to Autodesk Civil 3D CV42-3L About the Speaker: Pete Kelsey is an Autodesk Authorized Consultant an Autodesk Certified
More informationIf you are relying on someone else to provide existing ground data to you, use the guidelines below to ensure you receive the best data available.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Basics of Existing Ground Surface Generation The accuracy of an existing
More informationTutorial 01 Quick Start Tutorial
Tutorial 01 Quick Start Tutorial Homogeneous single material slope No water pressure (dry) Circular slip surface search (Grid Search) Intro to multi scenario modeling Introduction Model This quick start
More informationRun Specifi by clicking on the icon on your Desktop.
Run Specifi by clicking on the icon on your Desktop. Note: If you are using a demo version, once the program is loaded, a message will tell you the remaining days of the evaluation period. The main screen
More informationTutorial For LamTopo
Tutorial For LamTopo Automatic Grid Generation for LaModel One of the nicest features introduced in LaModel 2.0 was the capability of building the seam and topographic grid automatically from AutoCAD files.
More informationObjectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
v. 10.2 GMS 10.2 Tutorial Working with map projections in GMS Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
More informationDigital Pack Tutorial - For Mac
Digital Pack Tutorial - For Mac Contents Before You Start 1 Step 1 2 Step 2 3 Step 3 6 Step 4 8 Please feel free to contact us! BEFORE YOU START: Important! Do you have Adobe Reader or Adobe Acrobat Professional
More informationv Overview SMS Tutorials Prerequisites Requirements Time Objectives
v. 12.2 SMS 12.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
More informationv SMS 11.1 Tutorial Overview Time minutes
v. 11.1 SMS 11.1 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. It is suggested that this tutorial
More informationExporting from GIS 9.0 to AutoCAD
Exporting from GIS 9.0 to AutoCAD Once a map file is created in GIS with all the desired layers, selected data within a pre-defined boundary can be exported as a AutoCAD.dwg file. Setting up clip boundary
More informationObjectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
v. 10.4 GMS 10.4 Tutorial Working with map projections in GMS Objectives Learn how to work with projections in GMS, and how to combine data from different coordinate systems into the same GMS project.
More informationInstalling a Custom AutoCAD Toolbar (CUI interface)
Installing a Custom AutoCAD Toolbar (CUI interface) I used 2008LT for this tutorial; you may have a later AutoCAD with a different appearance. However, the customize user interface (cui) should be similar.
More informationSTART>PROGRAMS>ARCGIS>
Department of Urban Studies and Planning Spring 2006 Department of Architecture Site and Urban Systems Planning 11.304J / 4.255J GIS EXERCISE 2 Objectives: To generate the following maps using ArcGIS Software:
More informationWorking with Profiles
Tennessee Association of Professional Land Surveyors 2016 Annual Conference Murfreesboro Working with Profiles In Carlson Software Presented by Who Is That CAD Girl? Jennifer DiBona is a long time CAD
More informationLayout Tutorial. Getting Started. Creating a Layout Template
Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating a Layout Template
More informationTutorial 3: Constructive Editing (2D-CAD)
(2D-CAD) The editing done up to now is not much different from the normal drawing board techniques. This section deals with commands to copy items we have already drawn, to move them and to make multiple
More informationSURPAC Google Earth Linear and Graphic Functions
SURPAC Google Earth Linear and Graphic Functions Google Earth allows for the viewing of 2D or 3D colour satellite imagery for any point on the Earth, as well as being able to view galaxies and the ocean
More informationDisplay Layers in Geosoft 3D View
Use the New 2D/3D Workflow features in Target for ArcGIS In Target for ArcGIS version 3.5, there are three new interconnected features that make integrating 2D and 3D data in plan and section maps easier.
More informationAEC Logic. AEC Terrain. A program to manage earth works in a construction project. Yudhishtirudu Gaddipati 29-Jun-13
AEC Logic AEC Terrain A program to manage earth works in a construction project Yudhishtirudu Gaddipati 29-Jun-13 Contents 1 Introduction:... 5 2 Program Launch... 5 2.1 How to Launch Program... 5 2.2
More informationDucks on the Pond: Stormwater Management Basin Analysis Using AutoCAD Civil 3D and Autodesk SSA
Ducks on the Pond: Stormwater Management Basin Analysis Using AutoCAD Civil 3D and Autodesk Josh Kehs, P.E. Autodesk, Inc. CI4541 Learning Objectives At the end of this class, you will be able to: Model
More informationAutoCAD Civil 3D 2010 Education Curriculum Student Workbook Unit 2: Create Ground Data
AutoCAD Civil 3D 2010 Education Curriculum Student Workbook Unit 2: Create Ground Data Lesson 3 Surfaces Overview In this lesson, you learn how to work with surfaces in AutoCAD Civil 3D. Surfaces are threedimensional
More informationSMS v D Summary Table. SRH-2D Tutorial. Prerequisites. Requirements. Time. Objectives
SMS v. 12.3 SRH-2D Tutorial Objectives Learn the process of making a summary table to compare the 2D hydraulic model results with 1D hydraulic model results. This tutorial introduces a method of presenting
More informationRoadway Design using GeoTools
Roadway Design using GeoTools Introduction GeoTools is a general-purpose productivity tool for users of all types of geographic data. In the Civil Tools section, there are many tools for Civil engineering
More informationDevelopment Authority of the North Country (DANC) Internet Mapping Application Instructions Public Viewer 1. Purpose. 2. Logging-in. 3.
Development Authority of the North Country (DANC) Internet Mapping Application Instructions Public Viewer 1. Purpose The purpose of this document is to outline basic functionality of the DANC Internet
More informationTCP MDT Digital Terrain Model - V7.5
TCP MDT Digital Terrain Model - V7.5 Standard Version Introduction The Standard Version is suitable for carrying out all kinds of topographical survey projects, terrain profiles, volume calculations etc.
More information3D Model - Data Transfer Guide
Introduction 3D Model - The Leicester City model is a photogrammetric survey based 3D representation of 380ha of Leicester s Central Regeneration Area. The model is to be: Used for marketing and inward
More informationCarlson Survey Getting Started with Points
Index File Extensions.cfg... See Configuration Settings (.cfg) file.crd... See Coordinate (.crd) file.dwg... See Drawing (.dwg) file.dwt... See Drawing Template (.dwg) file.grp... See Point Group (.grp)
More informationBiowave II / Lightwave II Print Via Computer (PVC) Manual Issue 1.1
Biochrom Ltd Telephone: +44 (0)1223 423723 22 Cambridge Science Park Fax: +44 (0)1223 420164 Cambridge E-mail: support@biochrom.co.uk CB4 0FJ England Website: www.biochrom.co.uk Biowave II / Lightwave
More informationStringer Topo. For BricsCAD and AutoCAD. Getting Started
Stringer Topo For BricsCAD and AutoCAD Getting Started Table of Contents Typical Surveyors Workflow - Stringer Topo for CAD... 1 Module 1 - Introduction to Stringer Topo for CAD... 2 Module 2: Introduction
More informationFieldMate Handheld Communicator Data Converter for FieldMate. User s MANUAL
FieldMate Handheld Communicator Data Converter for FieldMate Introduction User s MANUAL The FieldMate Handheld Communicator Data Converter for FieldMate ( Data Converter ) is a data-interfacing software
More informationInterface to icon Construction Instruments and Machine Control
Interface to icon Construction Instruments and Machine Control CONTENTS 1. Preamble 2. Install and Configure LSS 3. Exporting data to Leica Machine Control (Scanlaser) 4. Importing LSS exported files into
More informationNaviModel 3 Contours. (NaviModel 3.1 Rev 102 and above) Author : Jesper Knudsen Company : Eiva A/S Date:
NaviModel 3 Contours (NaviModel 3.1 Rev 102 and above) Author : Jesper Knudsen Company : Eiva A/S Date: 2009-09-04 NaviModel Contours Tutorial Page 2 Introduction This tutorial takes you through steps
More informationRun Specifi by clicking on the icon on your Desktop.
Run Specifi by clicking on the icon on your Desktop. Note: If you are using a demo version, once the program is loaded, a message will tell you the remaining days of the evaluation period. The main screen
More informationDTM Mapping Addition of Customisable Toolbars
Well another year has passed here at the office and another version of the NRG Survey System for Windows is being released. Version 7 will be available from September 2003 onwards. We feel that the User
More informationChapter 2 Surfer Tutorial
Chapter 2 Surfer Tutorial Overview This tutorial introduces you to some of Surfer s features and shows you the steps to take to produce maps. In addition, the tutorial will help previous Surfer users learn
More informationProcessing Feature Codes SPECTRA PRECISION SURVEY OFFICE TUTORIAL
Processing Feature Codes SPECTRA PRECISION SURVEY OFFICE TUTORIAL Corporate office: Spectra Precision 10355 Westmoor Drive Suite #100 Westminster, CO 80021 USA Phone: +1-720-587-4700 Toll free (in USA):
More informationObjectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v. 12.2 SMS 12.2 Tutorial Working with map projections in SMS Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
More informationUser s Guide. Release Service pack Document Date: 1-March-2012
User s Guide Document Date: 1-March-2012 Release 2012 Service pack 1.3 www.projectmonitoringsystems.com 1 Recommendation If you are new to PMS Mobilizer, it is strongly recommended to take a print out
More informationAppserv Internal Desktop Access Mac OS Device with Safari Browser. Enter your Appserv username and password to sign in to the Website
Appserv Desktop Access Logging on from a Mac OS device Step 1. To sign in to the Appserv Desktop Access website, enter the following address into the Safari browser address bar. Please Note: This documentation
More informationCivil 3D Introduction
Civil 3D Introduction Points Overview Points are data collected by surveyors which represent existing site conditions (elevations, boundaries, utilities, etc.). Each point is numbered (or named) and has
More informationNYSAPLS 50 th Anniversary Surveyor's Conference and Exhibition
Field to Finish - 3D Modeling and DTM (InRoads Survey and PowerSurvey Basics) Presenter: Gerald B. Danzy, Software/Product Consultant Bentley Systems, Incorporated 685 Stockton Drive Exton, PA 19341 www.bentley.com
More informationOBJECT MANAGER PACKAGE USER S GUIDE
OBJECT MANAGER PACKAGE USER S GUIDE 1 CONTENT I. Introduction... 3 II. Installation... 3 III. Using the plugins... 4 a- General... 4 b- Object properties manager... 4 c- Pipe manager... 6 d- Plane manager...
More informationObjectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
v. 12.3 SMS 12.3 Tutorial Working with map projections in SMS Objectives Learn how to work with projections in SMS, and how to combine data from different coordinate systems into the same SMS project.
More informationEnter your Appserv username and password to sign in to the Website
Appserv Desktop Access Logging on from a Windows 10 Device Step 1. To sign in to the Appserv Desktop Access website, either enter the following address into the Microsoft Edge browser address bar, or click
More informationImporting GNSS Data SPECTRA PRECISION SURVEY OFFICE TUTORIAL
Importing GNSS Data SPECTRA PRECISION SURVEY OFFICE TUTORIAL Corporate office: Spectra Precision 10355 Westmoor Drive Suite #100 Westminster, CO 80021 USA Phone: +1-720-587-4700 Toll free (in USA): +1-888-477-7516
More informationv SMS 11.2 Tutorial Overview Prerequisites Requirements Time Objectives
v. 11.2 SMS 11.2 Tutorial Overview Objectives This tutorial describes the major components of the SMS interface and gives a brief introduction to the different SMS modules. Ideally, this tutorial should
More informationLD20493 From AutoCAD Civil 3D to Storm and Sanitary Analysis - Pond Design Using Volume-Grading Tools
LD20493 From AutoCAD Civil 3D to Storm and Sanitary Analysis - Pond Design Using Volume-Grading Tools Kevin Larkin LSC Design, Inc. Learning Objectives Learn how to dynamically model stormwater ponds using
More informationATNS. USING Google EARTH. Version 1
ATNS USING Google EARTH Version 1 ATNS/HO/Using Google Earth Page 1 25/04/2013 CONTENTS 1. BASIC SETUP 2. NAVIGATING IN GOOGLE EARTH 3. ADDING OBJECTS TO GOOGLE EARTH 4. USER HELP REFERENCES ATNS/HO/Using
More informationGeographical Information Systems Institute. Center for Geographic Analysis, Harvard University. LAB EXERCISE 1: Basic Mapping in ArcMap
Harvard University Introduction to ArcMap Geographical Information Systems Institute Center for Geographic Analysis, Harvard University LAB EXERCISE 1: Basic Mapping in ArcMap Individual files (lab instructions,
More informationComputer Basics. Logging onto Windows
Computer Basics DRN uses Windows PCs for all of its day-to-day operations. You will need to master the details of this section in order to perform your daily tasks. Fortunately, these basics are very simple
More informationLesson 14: Design Reports
14 Lesson 14: Design Reports WELCOME! This lesson is about producing reports from the design data generated in the tutorial. Now that you have designed the commercial site, it is possible to extract information
More informationStepwise instructions for getting started
Multiparameter Numerical Medium for Seismic Modeling, Planning, Imaging & Interpretation Worldwide Tesseral Geo Modeling Tesseral 2D Tutorial Stepwise instructions for getting started Contents Useful information...1
More informationGuideline for Importing Survey Data into Bentley Power InRoads v8i SS2
Guideline for Importing Survey Data into Bentley Power InRoads v8i SS2 I. REQUIREMENTS from the Geomatics/Survey Function: 1. A CAD-only drawing in.dwg file format ver. 2013, (that can be created natively
More informationMicroSurvey CAD 2018
MicroSurvey CAD 2018 s and s MicroSurvey CAD 2018 includes support for AutoCAD 2018.dwg files, Esri Shapefiles, Trimble JobXML files, and important bug fixes that continue to make MicroSurvey CAD the absolute
More informationitools Tutorial Three
itools Tutorial Three A 3D Multiplanar Viewer Creating a 3D Multiplaner Viewer This tutorial assumes the user has a basic understanding of itools. If you are a beginning itools user, it is recommended
More informationRecreating Hand Drawn Contour Maps using Didger and Surfer
Recreating Hand Drawn Contour Maps using Didger and Surfer Have you ever had a scanned contour map that you wanted to convert into a digital version? You might want to do this to easily change contour
More informationPoint Cloud Classification
Point Cloud Classification Introduction VRMesh provides a powerful point cloud classification and feature extraction solution. It automatically classifies vegetation, building roofs, and ground points.
More informationicon office release of version
Product: icon office Date: 17.12.2019 From: Torgny Israelsson icon office release of version 2019.1.11.20 We are pleased to announce the release of icon office 2019. icon office is now available as 64-bit
More informationReadme for Advanced Road Design for Civil 3D V15.01
Readme for Advanced Road Design for Civil 3D V15.01 This readme contains important information regarding the installation and use of Advanced Road Design versions as described above. This version of Advanced
More informationUsing PowerPoint to Create an Interactive Multimedia Portfolio Ben Johnson
Using PowerPoint to Create an Interactive Multimedia Portfolio Ben Johnson www.psd.k12.co.us/staff/benj Getting Started 1. Launch PowerPoint from the start button. Select the Design Template radio button.
More informationLesson 1 CAD Mechanical Part 1 Beginning Drawing Objectives
Lesson 1 CAD Mechanical Part 1 Beginning Drawing Objectives In this assignment you will learn to identify important terminology and functions of AutoCAD, to begin a new drawing and save data in the proper
More informationUser Manual. Gateway 6.2: Map Math
User Manual Gateway 6.2: Map Math TerraCutta Pro User Release Version 2.0 2014 Precision Cropping Technologies Pty Ltd. No part of this publication may be reproduced, transmitted, transcribed, stored in
More informationA stratum is a pair of surfaces. When defining a stratum, you are prompted to select Surface1 and Surface2.
That CAD Girl J ennifer dib ona Website: www.thatcadgirl.com Email: thatcadgirl@aol.com Phone: (919) 417-8351 Fax: (919) 573-0351 Volume Calculations Initial Setup You must be attached to the correct Land
More informationDigital Terrain Model V 6.5
TCP MDT Digital Terrain Model V 6.5 Professional Version Introduction The Professional Version is designed to assist users in all the phases of carrying out a Surveying or Civil Engineering project. Its
More informationAutoCAD & CADPIPE Electrical Template Drawing Setup
AutoCAD & CADPIPE Electrical Template Drawing Setup Setting up a template drawing ensures that when starting a new drawing the AutoCAD and CADPIPE settings are all setup and will be consistent in all drawings.
More informationRedlining Commands After retrieving a drawing to be redlined, select Redline from the Slick! menu bar or pick from one of the icons in the tool bar.
Annotate / Redlining During the design review process in working with engineering or architectural drawings, it is often useful to have the ability to look at a drawing and mark it up with comments or
More informationv Importing Rasters SMS 11.2 Tutorial Requirements Raster Module Map Module Mesh Module Time minutes Prerequisites Overview Tutorial
v. 11.2 SMS 11.2 Tutorial Objectives This tutorial teaches how to import a Raster, view elevations at individual points, change display options for multiple views of the data, show the 2D profile plots,
More informationMaterials Tutorial. Setting Materials Defaults
Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material quantities will also be calculated in
More informationUsing rasters for interpolation and visualization in GMS
v. 10.3 GMS 10.3 Tutorial Using rasters for interpolation and visualization in GMS Objectives This tutorial teaches how GMS uses rasters to support all kinds of digital elevation models and how rasters
More informationObjectives Learn how GMS uses rasters to support all kinds of digital elevation models and how rasters can be used for interpolation in GMS.
v. 9.1 GMS 9.1 Tutorial Using rasters for interpolation and visualization in GMS Objectives Learn how GMS uses rasters to support all kinds of digital elevation models and how rasters can be used for interpolation
More informationLayout Tutorial. Getting Started. Creating a Layout Template
Layout Tutorial This tutorial will explain how create a layout template, send views to a layout page, then save the document in PDF format. In this tutorial you will learn about: Creating a Layout Template
More informationReview and Evaluation with ScreenCorder 4
Review and Evaluation with ScreenCorder 4 Section 1: Review and Evaluate your work for DiDA...2 What s required?...2 About ScreenCorder...2 Section 2: Using ScreenCorder...2 Step 1: Selecting your recording
More information3DReshaper Help 2017 MR1. 3DReshaper Beginner's Guide. Image
3DReshaper Beginner's Guide Image 1 of 26 Texture Mapping Exercise: Texture a mesh with reference points Exercise: Export textures from an RSH file Exercise: Texture a mesh with camera parameters, adjust
More informationJob Aid. Remote Access BAIRS Printing and Saving a Report. Table of Contents
Remote Access BAIRS Printing and Saving a Report Table of Contents Remote Access BAIRS Printing a Report PDF HTML... 2 Remote Access BAIRS Printing a Report Export to PDF Interactive Reporting... 3 Remote
More informationLas Vegas, Nevada, December 3 6, Speaker Name: Heidi Hewett. Course ID:
Las Vegas, Nevada, December 3 6, 2002 Speaker Name: Heidi Hewett Course Title: Course ID: GD34-4L Course Outline: During this presentation, you'll learn about all the AutoCAD 2002 extensions, including
More informationv TUFLOW-2D Hydrodynamics SMS Tutorials Time minutes Prerequisites Overview Tutorial
v. 12.2 SMS 12.2 Tutorial TUFLOW-2D Hydrodynamics Objectives This tutorial describes the generation of a TUFLOW project using the SMS interface. This project utilizes only the two dimensional flow calculation
More informationDWG FastView for Web. User Guide
DWG FastView for Web User Guide Contents 1. Software installation and start-up... 1 1.1 Software installation... 1 1.2 Software start-up... 1 2.Operation interface and functions... 3 2.1 Operation interface...
More informationI-Carver CNC Project Computer Directions. Rob MacIlreith Last Update Oct 2017
I-Carver CNC Project Computer Directions Rob MacIlreith Last Update Oct 2017 READ THIS ENTIRE SLIDE FIRST Make sure you follow all the directions carefully. Mistakes in programming your design can be disastrous
More informationTutorial Second Level
AutoCAD 2018 Tutorial Second Level 3D Modeling Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to learn
More information1 Introduction to AutoCAD
1 Introduction to AutoCAD The term CAD (Computer Aided Design) applies to a wide range of programs that allow th user to created drawings, plans, and designs electronically. AutoCAD is one such program
More informationSURFACE WATER MODELING SYSTEM. 2. Change to the Data Files Folder and open the file poway1.xyz.
SURFACE WATER MODELING SYSTEM Mesh Editing This tutorial lesson teaches manual finite element mesh generation techniques that can be performed using SMS. It gives a brief introduction to tools in SMS that
More informationGY461/GEO461 Computer Mapping & GIS Technology Merging of DEM and Geology Raster Images
Introduction In this exercise you will merge the geology color fills created for the quadrangle geologic map, with a hill-shade image produced from a digital elevation model (DEM) of the quadrangle. This
More informationCHAPTER 1 COPYRIGHTED MATERIAL. Finding Your Way in the Inventor Interface
CHAPTER 1 Finding Your Way in the Inventor Interface COPYRIGHTED MATERIAL Understanding Inventor s interface behavior Opening existing files Creating new files Modifying the look and feel of Inventor Managing
More informationIntroduction to Adobe Premiere 5.1. Creating a New Project and Capturing Clips. Editing Digitized Clips. Reviewing and Exporting the Final Movie Clip
Introduction to Adobe Premiere 5.1 Creating a New Project and Capturing Clips Editing Digitized Clips Reviewing and Exporting the Final Movie Clip 1 Creating a New Project and Capturing Clips. 1. Select
More informationUser s guide. November LSE S.r.l. All rights reserved
User s guide November 2015 2015 LSE S.r.l. All rights reserved WARNING In writing this manual every care has been taken to offer the most updated, correct and clear information possible; however unwanted
More informationTutorial. Introduction to. support.ebsco.com
Tutorial Introduction to support.ebsco.com EBSCOhost is a powerful online reference tool that offers a variety of full text databases and popular databases from leading information providers. In this tutorial,
More informationATS4 AppModel Application Modeling Tool Getting Started Material
ATS4 AppModel Application Modeling Tool Getting Started Material ATS4 AppModel has been developed based on following: Write executable specifications instead of requirements Implementing Lean Software
More informationCarlson GIS for Surveyors
Professional Land Surveyors of Ohio 2016 Annual Conference -- Dayton Ohio Carlson GIS for Surveyors Presented by Who Is That CAD Girl? Jennifer DiBona is a long time CAD consultant and trainer doing business
More informationStep 2: To begin creating subregions, be sure you still have the Site Floor Plan selected and then click on the Massing and Site tab (1). Under this t
Abstract: This step by step guide will help you understand how to create subregions in Revit. These subregions will allow you to represent hardscapes and turf areas in your site model. **These steps begin
More informationMaterials Tutorial. Setting Materials Defaults
Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material quantities will also be calculated in
More informationA Practical Guide to AutoCAD Civil 3D 2018 Rick Ellis
A Practical Guide to AutoCAD Civil 3D 2018 Rick Ellis A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2017 All rights reserved. No part of this publication may be reproduced in any
More informationMosaic Tutorial: Advanced Workflow
Mosaic Tutorial: Advanced Workflow This tutorial demonstrates how to mosaic two scenes with different color variations. You will learn how to: Reorder the display of the input scenes Achieve a consistent
More informationLand Development Suite for BricsCAD Manual: Survey and Cogo commands:
Land Development Suite for BricsCAD Manual: Survey and Cogo commands: Before you begin go to Drafting -- Drawing Setup Drawing Setup - Select English or Metric units -changes the ltscale and labeling precision,
More information