this harness plugs into the back of the Digital Control Center and has individual sets of wires for each electrical component in the hopper shell

Transcription

1 54076 Auger end cap used to hold the auger and the auger motor in place $ $ Auger Lock collar used to attach the auger shaft to the gearbox shaft $ $ Auger motor - 2 rpm $ $ Auger motor mounting bracket $ 5.00 $ Auger nylon bushing prevents the Auger from rubbing in the Auger End Cap $ 5.00 $ Auger shaft $ $ Digital Control Center $ $ Faceplate Sticker replaces the sticker on the Digital Control Center $ $ Fan provides combustion air and cools the hopper $ $ Igniter Cartridge watt $ $ Igniter tube $ $ Power cord $ $ Probe - 36" Grill measures grill temperature inside the barrel $ $ Probe - 48" Meat $ $ Wire harness 8 pin to spade connectors this harness plugs into the back of the Digital Control Center and has individual sets of wires for each electrical component in the hopper shell $ $ Wire harness 8 pin to 6 pin DISCONTINUED: this harness was used on early model LG series grills and was used with "Main Wire Harness 50117" $ $ Wire Harness - Main DISCONTINUED: this main harness was used in early model LG series grills and was used with "DCC wire harness - 8 pin to 6 pin 50136" $ $ Page 1 of 6

2 54501 Complete Hopper Assembly complete hopper shell with electrical components INCLUDES: auger motor, fan, igniter, control board and wire harness DOES NOT INCLUDE: grill probe, meat probe $ $ Burn grate (7 7/8" wide) $ $ Burn pot $ $ Flame Broiler Bottom LG 700 $ $ LG 900 $ $ LG 1100 $ $ Flame Broiler Cover $ $ Flavor guard bracket $ 9.00 $ Hopper end plate $ $ Hopper Handle $ 7.00 $ Hopper lid $ $ Hopper Support/Hanger Bracket $ 7.00 $ Pellet deflector $ $ Probe wire shield - back LG /2" $ $ LG900 17" $ $ LG /2" $ $ Probe wire shield - hopper end $ 9.00 $ /2" 17" /2" Page 2 of 6

3 19 1/2" Barrel Lid LG 700 $ $ LG 900 $ $ LG 1100 $ $ Barrel Lid Hinge Left side $ 7.00 $ Right side $ 7.00 $ Barrel Lid Hinge Bolt $ 5.00 $ 3.00 Stainless Steel Handle LG inch $ $ LG inch $ $ LG inch $ $ Handle Bezel Washer $ 2.50 $ Dome Thermometer c/w Bezel $ $ Page 3 of 6

4 Barrel LG700 $ $ LG900 $ $ LG1100 $ $ Barrel Exhaust Louver LG " $ $ LG " $ $ LG " $ $ 9.60 Cooking grid - Lower/Main - Porcelain Coated Cast Iron LG700 & LG /2" x 19 3/8" $ $ LG /8" x 19 3/8" $ $ LG /2" x 19 3/8" $ $ Cooking grid - Upper - Porcelain Coated Steel LG /4" x 21" $ $ LG /4" x 28" $ $ LG /4" x 32 7/8" $ $ Upper cooking rack hanger bracket Left side $ 9.00 $ Right side $ 9.00 $ Page 4 of 6

5 Bottom Shelf LG700 $ $ LG900 $ $ LG1100 $ $ Leg Left (hopper side) $ $ Right $ $ Skirt - 1 piece only LG700 $ $ LG900 $ $ LG1100 $ $ Wheel/caster Caster Wheel - 3" Inline (1pc) $ $ Wheel - 6" Inline (1pc) $ $ Wheel axle pin $ 5.00 $ Cotter Hairpin $ 1.00 $ Flat washer $ 1.00 $ LG Screw Package Kit $ 5.00 $ Drip Bucket $ 9.00 $ Textured paint - Aerosol $ $ Page 5 of 6

6 Deluxe Front Shelf - stainless steel 12" deep X 24" wide NOTE: this front shelf fits all LG700 grills but will only fit some LG900 and LG1100 grills not all LG900 and LG1100 grills have mounting holes that are 14 1/2" apart - a measurement is needed some LG900 grills will have mounting holes that are 21 1/2" apart - item needed some LG1100 grills will have mounting holes that are 26 1/2" apart - item needed Deluxe Front Shelf - stainless steel 12" deep X 31" wide NOTE: this front shelf will only fit LG900 grills with mounting holes in the skirt that are 21 1/2" apart Deluxe Front Shelf - stainless steel 12" deep X 36" wide NOTE: this front shelf will only fit LG1100 grills with mounting holes in the skirt that are 26 1/2" apart $ $ $ $ $ $ Side Shelf - black 12" deep X 14 1/2" wide Side Shelf - stainless steel 12" deep X 14 1/2" wide 14 1/2" mounting bracket $ $ /2" mounting bracket $ $ Page 6 of 6