ONLINE AUCTION HUGE ONLINE AUCTION (14) LOCATIONS IN TEXAS

Transcription

1 ONLINE AUCTION HUGE ONLINE AUCTION (14) LOCATIONS IN TEXAS 2012 < HURCO MDL. VMX42 VERT. MACHINING CENTER VANGUARD MDL. MB130E HORIZONTAL BORING MILL SALE DATE: BIDS START CLOSING ON THURSDAY, SEPTEMBER 8 AT 10:00 A.M. INSPECTION: See Each Location for Inspection Instructions 18% BUYER S PREMIUM WILL APPLY KINGSTON 40" X 80" GAP BED ENGINE LATHE ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING AT THIS AUCTION. Go to and click on on our calendar page for this auction sale TAYLOR 70,000-LB. CAP. MDL. THX350L FORKLIFT AMADA LC2415 1,500 WATT LASER W/MP1530 SHEETLOADER MINSTER 250 T. CAP. HEVI-STAMPER PRESS Read Partial Terms and Conditions on Last Page of Brochure Sale Conducted By: Ron Moore, Texas Lic. #7314 HOUSTON DALLAS ST. LOUIS Headquarters: 1304 Langham Creek Drive, Suite 454 Houston, Texas PHONE: (713) FAX: (713) pmi@pmi-auction.com WEBSITE:

2 LOCATION A PRO TURN MACHINE, INC Dundee Road, Suite 303 Cypress, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M HURCO MDL. VMX42 VERTICAL MACHINING CENTER EXCEL MDL. 810 VERTICAL MACHINING CENTER VERTICAL MACHINING CENTERS HURCO MDL. VMX42, new 8/2012, 24" x 48" tbl., dual screen Hurco control, 24-pos. ATC. EXCEL MDL. 810, Fanuc O-M control, 18" x 36" tbl., 24-pos. tool changer, S/N ES SLANT BED ENGINE LATHE HAAS MDL. SL-30T, new 9/2008, collet chuck, 12-tool turret, tailstock, tool presetter, approx. 36" centers, 24" over bed, S/N VERTICAL TURRET MILLS (2) ACER PROTOTRAK MDL. ULTIMA3VKH, new 1996, Mdl. SMX retrofitted control, 10" x 48" tbl. ENGINE LATHES KINGSTON 26" X 90" MDL. HD-2690, new 1999, 15" dia. 3-jaw chuck, taper, spds.: 30 1,200 RPM, Newall Mdl. C70 D.R.O., S/N CH KINGSTON (CHIN HUNG) 22" X 60" MDL. HD-2260 GAP BED, new 1996, taper, 12" dia. 3-jaw chuck, spds.: 30 1,200 RPM, Newall Mdl. C70 D.R.O., steadyrest, S/N N.A. PRECISION TOOLROOM LATHE WILTON 8" X 20" MDL. TRL11183, Newall D.R.O., inch/metric thdng., S/N N.A. VERTICAL BANDSAW JET w/blade welder and grinder HAAS MDL. SL-30T SLANT BED ENGINE LATHE < KINGSTON (CHIN HUNG) 22" X 60" GAP BED ENGINE LATHE THIS BROCHURE IS SUBJECT TO CHANGE. ITEMS BEING ADDED DAILY. 2 KINGSTON 26" X 90" MDL. HD-2690 ENGINE LATHE

3 LOCATION A, continued (1 OF 2) ACER PROTOTRAK VERTICAL TURRET MILLS DOUBLE-END GRINDER HAMMOND MDL. 7. HORIZONTAL BANDSAW KALAMAZOO, manual. ARBOR PRESS FAMCO. MILLER MILLERMATIC 185 WELDING MACHINE MITUTOYO MDL. PH-A14 OPTICAL COMPARATOR ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING AT THIS AUCTION. Go to pmi-auction.com and click on on our calendar page for this auction sale. WELDING MACHINES LINCOLN POWERMIG MDL. 255, S/N U103. LINCOLN POWERMIG MDL. 255XT, new MILLER MILLERMATIC MDL. 185, S/N N.A. Q.C. DEPARTMENT EQUIPMENT PIN GAUGES; O.D. MICROMETERS; PLUG AND RING GAUGES AND CABINETS; WORKBENCH w/toolpost and O.D. micrometers. OPTICAL COMPARATOR MITUTOYO MDL. PH-A14, 2-axis D.R.O. TRANSFORMER MGM, KVA, Siemens switchgear. MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENT 2' X 3' SURFACE PLATE; HT. GAUGE; CRAFTSMAN TOOL CABINET; CABINETS; ROLLING CABINET; WORKBENCHES; TOOLING; CHUCKS; HEATER; WHEELBARROW; VACUUM; TILTING HOPPER; WELDING TBL. w/vise; 8" VERT./ HORIZ. ROTARY INDEXER; COMBINATION BELT AND DISC GRINDER; H-FRAME PRESS; (3) 6" MILLING VISES; BORING BARS; CARBIDE INSERT TOOLHOLDERS; SPADE DRILLS; JAWS; LIVE CENTERS AND DEAD CENTERS; MICROMETERS; TOOLPOST AND TOOLHOLDERS; DIGITAL CALIPERS; BORING BAR; CARBIDE INSERTS; SPADE DRILL BLADES; CARBIDE, RING AND PLUG GAUGES; 2" BELT GRINDER; HAAS TOOLING; SHOP SUPPLIES; ROLLING TOOLBOX; 4' X 4' WELDING TABLE w/vise; HIPPO HOPPER; PIGEON HOLE CABINETS; DRILL BITS; END- MILLS; HORIZ./VERT. ROTARY INDEXER, VISE; TAPS; ANGLE PLATE; RIGHT ANGLE HEADS; RAW MATERIAL; MAGNETIC BASE DRILL; FANS; TAPE DISPENSER; LADDER; HELPER STANDS. RECIPROCATING AIR COMPRESSOR SPEEDAIRE 2-STAGE, 10 HP motor, 120 gal. horiz. air receiver, Speedaire dryer. MATERIAL HANDLING EQUIPMENT ROLLING GANTRY LIFTS w/hoists; ROLLING CART w/cutting tools. WILTON 18" X 20" PRECISION TOOLROOM LATHE DON T MISS THIS SALE! < REACH-IN BLAST CABINET KALAMAZOO HORIZONTAL BANDSAW SPEEDAIRE 2-STAGE 10 HP RECIPROCATING AIR COMPRESSOR 3

4 LOCATION B EAST HOUSTON STORAGE WAREHOUSE 3603 Melva Street, Houston, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M. TREE MDL. 1060/24 VERTICAL MACHINING CENTER MAZAK H-630 HORIZONTAL MACHINING CENTERS HORIZONTAL MACHINING CENTERS (2) MAZAK MDL. H-630 HORIZONTAL MACHINING CENTERS IN MANUFACTURING CELL w/fmc pallet transfer unit, new 1993, specs for each machine: Mazak M-32 control, CAT-50 spndl. taper, spndl. spds.: 22 4,500 RPM, 30 HP motor, 39.4" X-axis, 31.5" Y-axis and 29.5" Z-axis travels, 24.7" x 24.7", 2,640-lb. pallet load cap., 1 deg. indexing, 120-pos. ATC, coolant system, chip conveyor, full enclosure, FMC pallet transfer unit, FMC controller, S/N , S/N VERTICAL MACHINING CENTERS CINCINNATI MILACRON SABRE 750 MDL. ERO, Acramatic 2100 control, 34" x 17" tbl., 1,000-lb. tbl. load cap., spndl. taper, spds.: 60 8,000 RPM, 10 HP motor, 30" tbl. long. travel, 15" cross travel, 20" spndl. vert. travel, coolant, tool changer, chip conveyor, S/N 7029 A TREE MDL. 1060/24, Siemens Acramatic 2100 control, 50" x 23" tbl., 40" X-axis, 24" Y-axis and 25" Z-axis travels, CAT-40 spndl. taper, 8,000 RPM, 20 HP motor, 20-pos. ATC, chip conveyor, coolant tank, S/N HAAS VF-4, 18" x 52" tbl., 1,500-lb. load cap., 0 7,500 RPM spndl. spds., CAT 40 taper, 20 HP, 50" X-travel, 20" Y-travel, 25" Z-travel, Haas, 20-pos. ATC, brushless servo motors on axes, prog. coolant, S/N WARNER & SWASEY MDL. WSU-12 UNIVERSAL SLANT BED LATHE SLANT BED LATHES WARNER & SWASEY MDL. WSU-12 UNIVERSAL, G.E. Fanuc 10T control, 15.7" sw. over bed, 32" sw. over ways (for 16" distance), 46" dist. btwn. centers, 15 HP spndl. motor, 3.9" bar cap., chip conveyor, turbo conveyor, S/N , S/N MORI SEIKI MDL. SL-3H, Fanuc control, 22.4" sw. over bed, 24" dist. btwn. center, 8" max. workpiece dia., 21.6" max. machining length, A2-6 spndl. nose, spndl. spds.: 40 4,000 RPM, 15 HP spndl. motor, 6.3" X-axis and 22" Z-axis travels, collet-type chuck, 12-pos. tool turret, tailstock, chip conveyor, barstock feeder, 220 v./3 ph./60 Hz, S/N MORI SEIKI MDL. SL-35B/750, new 1990, Fanuc 0-T, 23.6" sw. over bed, 16.7" sw. over carriage, 16.5" max. turning dia., 35" dist. btwn. centers, 30.7" max. machining length, A2-8 spndl. nose, 4.1" spndl. bore, spndl. spds.: 25 25,000 RPM, 30 HP motor, 9.4" X-axis and 33.7" Z-axis travels, 10-pos. turret, tailstock, Kitagawa 15" chuck, lube system, coolant, chip conveyor, S/N N.A. HAAS VF-4 VERTICAL MACHINING CENTER 4 MORI SEIKI SL-35B/750 SLANT BED LATHE

5 LOCATION B, continued FLATBED LATHE ACRA MDL. FCW2680NC, new 2008, Fanuc 0i-TC control, 26" sw. over bed, 14.5" max. turning dia., 80" centers, 7.1" spndl. bore, 1,000 RPM, 30 HP motor, 19.5" 4-jaw front and rear chucks, 8-pos. front vert. tool turret, 6-pos. rear horiz. tool turret, S/N COMBINATION LATHE ROMI 27" X 80" MDL. M-27, new 2007, G.E. Fanuc 21i-T control, 26.97" sw. over bed, 21.26" sw. over carriage, 16.93" over crosslide, 87.73" dist. btwn. centers, A2-11 spndl. nose, 6.7" spndl. bore, 1,000 RPM, 18.7" X-axis and 80.78" Z-axis travels, 24" dia. 4-jaw chuck, 8-station tool turret, tailstock, S/N N.A ROMI 27" X 80" MDL. M-27 COMBINATION LATHE < NISSIN MDL. NST-40/125 LATHE LATHES NISSIN MDL. NST-40/125, NCT control, rewired and retrofit in 2010, 26" sw. over bed, 21" sw. over crosslide, 49" dist. btwn. centers, 60 HP spndl. motor, spndl. spds.: 10 2,000 RPM, 15" hyd. chuck, hyd. tailstock, Rohm hyd. steadyrest, chip conveyor, S/N N.A. MORI SEIKI MDL. SL-65A, new 1996, MFT3 control, 5" sw. over bed, 25" max. turning dia., 35" max. turning length, 4.1" spndl. bore, 50 HP spndl. motor, 21" hyd. chuck, 12-pos. tool turret, hyd. tailstock, chip conveyor, S/N HORIZONTAL BORING MILLS VANGUARD MDL. MB130E, new 2011, 5.11" dia. spndl., ISO 50 spndl. taper, (18) spndl. spds.: RPM, (13) facing head spds.: RPM, 20 HP motor, 63" x 70.8" tbl., 22,000-lb. tbl. load cap., 78.7" tbl. cross travel, 74.8" tbl. long. travel, 78.7" spndl. vert. travel, 35.4" spndl. axial travel, Newall D.R.O. (X, Y, Z), Newall D.R.O. on outboard support, built-in rotary tbl., built-in facing head, pendant control, pwr. clamping, S/N " SHIBAURA (TOSHIBA) MDL. BF-13A FLOOR- TYPE, new 1974, 5.12" spndl. dia., No. 50 taper, 24 spndl. spds., RPM, 25 HP, IPR feeds, 35.4" spndl. travel, 234" col. travel, 98" vert. headstock travel, pendant control, 3-axis Sony DRO, operator platform, pwr. draw bar, chip conveyor, S/N " GIDDINGS & LEWIS MDL. 65-H5-T TABLE- TYPE, 5" dia. spndl., No. 50 taper, 48" x 72" tbl., 48" vert. headstock travel, 36" spndl. travel, 125" saddle, 96" bed length, 1,020 RPM spndl. spds., 30 HP, Allen Bradley Series 9, pwr. draw bar, oper. control pendant, S/N " COLLET & ENGLEHART TABLE-TYPE, w/rotary tbl., 4" spndl. dia., No. 50 NMTB, 8 1,600 RPM spndl. spds., 15 HP, 36" x 55" rotary tbl., 28" spndl. travel, 55" tbl. cross travel, 36" in-out travel, 48" vert. travel, pwr. draw bar, 4-axis DRO, pendant control, hyd. tank w/chiller, S/N 219 A08G5. AIRLIFT ROTARY TABLE LUCAS 48" X 72", 48" x 72" T-slotted tbl., (6) T-slots, 27,000-lb. load cap., 12" tbl. ht., air lift, manual clamping, precision ground 48" x 72" x 2.5" thk. bolt-on fixture w/(4) T-slots, S/N 48BP0123. MORI SEIKI MDL. SL-65A LATHE < VANGUARD MDL. MB130E HORIZONTAL BORING MILL LUCAS 48" X 72" AIRLIFT ROTARY TABLE 5

6 LOCATION B, continued CINCINNATI HYPRO 108" VERTICAL TURRET LATHE SHIBAURA (TOSHIBA) TSS-16A OPEN SIDE VERTICAL TURRET LATHE POLAMCO MDL. KNA-110/135A 43" VERTICAL TURRET LATHE VERTICAL TURRET LATHE 60" GRAY RINGMASTER, 60" tbl. dia. (4-jaw ind. chuck), 68" swing, 60" under rail, 54" under tool, 36" ram travel, RPM tbl. spds., IPM feeds, 50 HP, Fanuc 18i, pendant control, 4-pos. indexing tool block, Renishaw tool probe, forced/metered lube, work platform, S/N VERTICAL TURRET LATHES SHIBAURA (TOSHIBA) TSS-16A OPEN SIDE, new 1977, 63" tbl. dia., 78.7" swing, 51.2" under rail, 37.4" rail head vert., ±30 deg. head swivel, 27,600 tbl. load cap., (3) tbl. spds.: RPM, 30 HP motor, pendant control, Newall 2-axis D.R.O., 5-station manual tool turret, 4-jaw chuck for tbl., side head (currently not functioning), S/N 222E50. CINCINNATI HYPRO 108", 120" swing, 32 RPM tbl. spd., 40 HP motor, 60" under rail, IPR ram head fd., 45 deg. ram head swivel, 2 rams on cross rail, side head, pendant, (4) boring mill jaws, no pit required, S/N POLAMCO 43" MDL. KNA-110/135A, new 1979, 43.3" tbl. dia., (4) boring mill jaws, 53.1" sw. w/side head below tbl., 43.3" sw. w/side head above tbl., 37.4" max. work ht., 38" ht. tbl., 23.6" tool head vert. travel, 31.5" cross rail vert. travel, ±45 deg. turret tilt, (19) tbl. spds.: RPM, 29.5 HP motor, 5-pos. swiveling turret, 4-pos. side head, Mitutoyo scale w/d.r.o. on turret ram (X, Y axes), pendant control, lubrication pump, S/N LATHES DEAN, SMITH & GRACE 21" X 96", 600 RPM spndl. spds., 4-jaw chuck, chuck guard, tailstock, crosslide, S/N LODGE & SHIPLEY 20" X 120", 11" sw. over crosslide, 120" dist. btwn. centers, (24) spndl. spds.: RPM, 2-3/4" spndl. hole, No. 6 Morse spndl. taper, (60) fds: IPR, (60) thds: 1 64 TPI, 1-3/4" tailstock spndl. hole, No. 5 Morse tailstock spndl. taper, 11-5/8" tailstock spndl. travel, 19-1/4"W. bed, 18" dia. 4-jaw chuck, crosslide, steadyrest, chip pan bed, S/N N.A. MONARCH 37" X 108" MDL. 32NN HEAVY-DUTY, 37.5" sw. over bed, (16) spndl. spds.: RPM, 2-3/16" spndl. hole, D-1-11 spndl. nose, (48) fds: IPR, (48) thds: 1 56 TPI, 9-1/4" tailstock spndl. travel, 31-1/2"W. bed, 40 HP motor, 24" dia. 4-jaw chuck, H.D. 2-spd. tailstock w/live center, taper attach., chip pan bed, S/N K. MONARCH 10" X 20" MDL. EE, 12.5" sw. over bed, 7" sw. over crosslide, 20" dist. btwn. centers, 6" dia. 3-jaw chuck, Camlock D1-3 spndl. nose, 1-13/32" spndl. bore, 2,500 RPM, variable spd. controls, (30) fds: IPR, (50) thds: 3 92 TPI, pwr. rear turret, Aloris toolpost, chip pan, S/N BT. LODGE & SHIPLEY 20" X 120" ENGINE LATHE DEAN, SMITH & GRACE 21" X 96" ENGINE LATHE 6 GRAY RINGMASTER 60 VERTICAL TURRET LATHE

7 EAST HOUSTON, TEXAS RYAZAN 24" X 120" ENGINE LATHE MONARCH 37" X 108" H.D. ENGINE LATHE ENGINE LATHES SOUTHBEND 16" X 120", 16" sw. over bed, 120" dist. btwn. centers, 12" dia. 3-jaw chuck, steadyrest, chip pan, S/N N.A. RYAZAN 24" X 120" MDL. 1M63, new 1990, 24.8" sw. over bed, 13.7" sw. over crosslide, 118" max. workpiece length, 7,700-lb. max. workpiece weight, 4.13" spndl. bore, spndl. spds.: 10 1,250 RPM, 20 HP spndl. motor, 20" dia. 4-jaw chuck, taper attach. H.D. roller-type steadyrest w/15" hole, toolpost, S/N MAZAK 24" X 160" GAP BED TYPE, 25" sw. over bed, 34.25" in gap, 160" dist. btwn. centers, 4.25" spndl. bore, spndl. spds.: 30 1,200 RPM, 20 HP, 18" dia. 3-jaw and 20" 4-jaw chucks, tailstock, (3) steadyrests, toolpost, taper attach., chip pans, inch/metric thdng., thread dial, S/N 34651W. KINGSTON 40" X 80" MDL. HR2000 GAP BED TYPE, new 1994, 31" over crosslide, " in gap, " gap length, 80" dist. btwn. centers, 6 MT spndl. taper, (16) spndl. spds.: RPM, 20 HP motor, 32" dia. 4-jaw chuck, tailstock, compound tool slide, (2) steadyrests, taper attach., toolpost, coolant, foot brake, thdng., chip pan, S/N G. TOS 42" X 315" MDL. SU100, new 1991, 29" sw. over crosslide, 4" spndl. bore, (21) spndl. spds.: RPM, 30 HP spndl. motor, (54) fds: IPR, 32" bed width, tailstock, 39" faceplate-type chuck, 4-way toolpost, (2) steadyrests, pwr. compound for tapering, inch/metric thdng., rapid traverse, S/N LEBLOND 32" X 240" MDL. 3220NF, 20" sw. over crosslide, 47" center ht., (36) spndl. spds.: 10 1,800 RPM, D1-8 spndl. nose, 2-3/16" spndl. bore, 14" cross slide travel, 5" compound slide travel, 40 HP motor, 3-jaw chuck, tailstock, thdng., taper attach., steadyrest, chip trays, coolant, S/N 3NFL1203. SALE DATE: BIDS START CLOSING ON THURSDAY, SEPTEMBER 8 AT 10:00 A.M. KINGSTON 40" X 80" GAP BED ENGINE LATHE TOS 42" X 315" ENGINE LATHE LEBLOND 32 X 240 ENGINE LATHE 7

8 LOCATION B, continued LAGUN MDL. FT-2 VERTICAL MILL BRIDGEPORT SERIES II 11" X 58" VERTICAL KNEE MILL VERTICAL MILL LAGUN MDL. FT-2, 9" x 48" tbl., 1-7/8" spndl. dia., R8 taper, (2) spndl. spds.: 55 2,940 RPM, 5" spndl. travel, ±45 deg. head tilt, ±90 deg. head swivel, ±90 deg. column swivel, 29.5" tbl. long. travel, 16" cross travel, 16" knee vert. travel, Newall 3-axis D.R.O., worklight, pwr. tbl. long. travel, spndl. pwr. fds., S/N SE VERTICAL KNEE MILL BRIDGEPORT SERIES II 11" X 58" MDL. 15BR, 11" x 58" tbl., No. 40 spndl. taper, (2) spndl. spds.: 50 3,500 RPM, 4 HP motor, 2.125" spndl. dia., 4.25" quill dia., 1.25" drilling cap. (manual, mild steel), 0.75" drilling cap. (pwr. feed, mild steel), 30" tbl. long. travel, 15 tbl. cross travel, 16" knee vert. travel, 16" ram travel, 5" quill travel, " to " throat, 1,000-lb. tbl. load cap., Acu-Rite D.R.O., worklight, coolant, S/N MULTI-SPINDLE DRILLING & TAPPING MACHINE BELDEN 48-SPINDLE, S/N N.A. DRILLING & TAPPING MACHINE CHAS ALLEN, 4" spndl. drill station, 24" x 84" tbl., pwr. tbl. movement, 2,000 RPM, 2 HP (each head), S/N FACING & CENTERING MACHINE CHURCHILL-REDMAN MDL. EC230, 2" max. face dia., 30" dist. btwn. centers, (2) 3 HP and (1) 2 HP motors, (8) spndl. spds.: 200, 270, 390, 520, 700, 930, 1340 and 1,780 RPM, pwr. operated vise jaws, 1/2" to 4" bar cap., sngl. lever operation control, auto. cycle for facing and centering, S/N POWER HACKSAW KASTO, 15.7" sq. cap., 15" x 12.6" rect. cap., 25.6" x 2.16" x 0.09" blade, (4) blade spds.: 40, 57, 80 and 115 SPM, 8.7 HP motor, S/N N.A. THIS BROCHURE IS SUBJECT TO CHANGE. ITEMS BEING ADDED DAILY. BELDEN MULTI-SPINDLE DRILLING AND TAPPING MACHINE SPRINGFIELD MDL. 2A-TR UNIVERSAL VERTICAL GRINDER DON T MISS THIS HUGE ONLINE SALE! KASTO POWER HACKSAW 8 BLANCHARD 36" ROTARY SURFACE GRINDER BALANCING MACHINES GISHOLT, 5,000-lb. cap. IRD MDL. B15 BALANCING MA- CHINE, 1,500-lb. cap., 40" max. rotor dia., 0.08 gram inch max. sensitivity, 55" bed length, 0.5" 8" journal dia. range, 6" 49.5" journal separation, 2 HP drive motor, 250 6,000 RPM balancing spds., underslung belt drive w/manual belt tensioning, (2) roller work supports, end thrust assemblies, suspension motion locks, motor control console, S/N N.A.

9 < VANGUARD 12" X 60" UNIVERSAL CYLINDRICAL GRINDER CHEVALIER AUTOMATIC SURFACE GRINDER EAST HOUSTON, TEXAS LANDIS 20" X 120" CYLINDRICAL GRINDER NORTON 10" X 120" PLAIN CYLINDRICAL GRINDER HEALD MDL. 72A I.D. GRINDER UNIVERSAL VERTICAL GRINDER SPRINGFIELD MDL. 2A-TR, 25" tbl. dia., 30" swing, 21" grinding head stroke, grinding head fds: IPM, grinding head fds: RPM, 20" clearance over tbl., 18" nominal hole depth, 7.5 HP motor, T-slotted face plate-type tbl., (8) T-slots, pendant control, coolant pump, tbl. guard, S/N ROTARY SURFACE GRINDER BLANCHARD 36" MDL , 36" dia. magnetic chuck, 40" sw. inside water guards, 12" ht. under wheel, (6) spds.: 6 33 RPM, 18" grinding wheel, 720 RPM wheel spd., 40 HP motor, updated controls, neutrifier, wet base design, coolant pump, segmented wheel, splash guards, S/N AUTOMATIC SURFACE GRINDER CHEVALIER MDL. FSG-3A1224H, 12" x 24" electromagnetic chuck tbl., 14" x 2" x 5" grinding wheel, 24.75" spndl. center to tbl., " hyd. long. tbl. travel, tbl. spds.: FPM, 1,750 RPM grinding wheel spd., 5 HP motor, 2 HP hyd. motor, S/N P SURFACE GRINDER K.O. LEE 6" X 18" MDL. SE618, 19" x 6" tbl., 20" tbl. long. travel, 7.25" tbl. cross travel, 3.125" " work ht. range, 8" x 0.75" x 1.25" grinding wheel, 2,850 RPM spndl. spds., 2 HP spndl. motor, S/N N.A. UNIVERSAL CYLINDRICAL GRINDER VANGUARD 12" X 60" MDL. ME1432B/1500, new 2008, 12.6" O.D. grinding, 5" I.D., 60" centers, (4) work spds.: RPM, 157 IPM tbl. spd., 10" max. wheelhead travel, ±30 deg. wheelhead swivel, 90 deg. workhead swivel, 15 HP motor, I.D. grinding spndl., coolant, wheel dresser, S/N HEAVY-DUTY CYLINDRICAL GRINDER LANDIS 20" X 120", 5" hole through workhead, updated electrics, updated hyds. for tbl. drive, new work head motor w/inverter drive, 3-jaw chuck on headstock, S/N N.A. PLAIN CYLINDRICAL GRINDER NORTON 10" X 120" TYPE C, new 1953, 24" grinding wheel dia., 15 HP grinding wheel motor, variable spd. workhead, (3) work rests, coolant tank, Acu-Rite 2-axis D.R.O., S/N I.D. GRINDERS HEALD MDL. 72A, 15.5" sw. over tbl., 10.25" max. grinding stroke, 7.5" max. hole dia. to grind, tbl. spds.: 0 32 FPM, 0.001" cross feed dial graduation, 5 HP grinding spndl. motor, 3/4 HP workhead motor, 2,100 RPM workhead spds., tbl. stops, S/N HEALD MDL. 172, 36" sw. inside chuck guards, 1" 14" dia. hole grinding cap., 13" stroke, 6.25" 13.5" gap adj., 12" dia. workhead spndl. flange, 1-11/16" workhead spndl. hole, tbl. spds.: 0 18 FPM, 210 RPM workhead spds., 5 HP spndl. motor, 5 HP workhead motor, S/N N.A. AXELSON 28" X 72" MDL. 24, 28.75" sw. over bed, 144" bed, spndl. spds: RPM, 20 HP spndl. motor, 24" dia. 4-jaw chuck, taper attach., outfitted w/ Boneham 4 HP integrated grinding spndl. w/5" dia., 24" reach and 1,800 RPM, S/N PEDESTAL TOOL GRINDER BALDOR, 1/2 HP motor, 220 v./ 3 ph., 2 amps, S/N 674. HEALD MDL. 172 ID GRINDER SALE DATE: BIDS START CLOSING ON THURSDAY, SEPTEMBER 8 AT 10:00 A.M. 9

10 ROUNDO 3-ROLL HYDRAULIC PLATE ROLL ALLSTEEL 95 T. CAP. HYDRAULIC PRESSBRAKE ACCURPRESS 60 T. HYDRAULIC PRESSBRAKE DOUBLE PINCH HYDRAULIC PLATE ROLL ROUNDO 12' X 1/4" 3-ROLL MDL. PS 205/12, 12' x 1/4" at 40.36" ID (36,000 PSI yield), 12' x 5/16" at over 12' dia., 8.5" min. dia., 8.07" roll dia., rolling spds.: 0 23 FPM, 7.5 HP motor, 6-button pendant control, hyd. roll adj., hyd. drop end, high carbon steel rollers, proportional valves, long. starter groove, emergency stop safety wire, S/N HYDRAULIC PRESSBRAKES ACCURPRESS 60 T. CAP. MDL. 7606, new 1992, 72"L. x 3"W. bed, 52" dist. btwn. frames, 34" ht. bed, 14" open ht., 6" closed ht., 8" stroke, 8" throat, 125 IPM approach spd., 18 IPM press, 205 IPM return, 10 HP motor, Autogauge backgauge, S/N AMADA 88 T. CAP. MDL. RG-80, new 1984, 78" bending length, 60" dist. btwn. housings, 15" throat depth, 4" stroke, 3-cylinder up-acting, 7.5 HP motor, Amada backgauge, S/N STANDARD INDUSTRIAL 150 T. CAP., 96" bed length, 77" dist. btwn. frames, 13" open ht., 7" closed ht., 6" stroke, 6" throat, Automec 150 Autogauge 2-axis backgauge, die holder top and bottom clamps, S/N F ALLSTEEL 95 T. CAP., new 1998, 96" bed length, 77" dist. btwn. frames, 15" open ht., 9" closed ht., 6" stroke, 183 IPM approach spd., IPM, 206 IPM return, 15 HP motor, Autogauge 99 backgauge, top die holder clamp, S/N MG HORIZONTAL INCLINED WHEEL PRESS K. R. WILSON 125 T. CAP., 20" stroke, 8" bore, 148" ram face to resistance block, 50" dist. btwn. strain bars, 10" dia. resistance block hole, strain bar adj. holes on 10" centers, 7.5 HP motor, S/N 2654 (Note: specifications are approximate). OBI PRESS BLISS 75 T. CAP. MDL. C-75, 36" x 24" bolster area, 24" x 18" slide area, 3.5" slide adj., 2.5" x 3" slide stem hole, 15" shut ht., 4" stroke, 54 SPM, 7-1/2 HP motor, 3" thk. bolster plate, air clutch, air counterbalance, S/N H (2) SPRING w/vickers hyd. tank. COMPRESSION PRESSES LOCATION B, continued AMADA 88 T. PRESSBRAKE SPRING COMPRESSION PRESS BLISS 75 T. OBI PRESS STANDARD INDUSTRIAL 150 T. HYDRAULIC PRESSBRAKE 10 K.R. WILSON HORIZONTAL INCLINED WHEEL PRESS THIS BROCHURE IS SUBJECT TO CHANGE. ITEMS BEING ADDED DAILY.

11 EAST HOUSTON, ONLINE TEXAS AUCTION SALE DATE: BIDS START CLOSING ON THURSDAY, SEPTEMBER 8 AT 10:00 A.M. LOCATION B, continued EAST HOUSTON STORAGE WAREHOUSE 3603 Melva Street Houston, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M. WELDINGPOSITIONER WORTHINGTON 10,000-LB. CAP., 12" C. of G., 12" eccentricity, 66" tbl. dia., 58" tbl. ht., tbl. spds.: 0 8 RPM, deg. tbl. tilt, 3 HP rotation motor, remote pendant, dual pedal foot switch, S/N UNIVERSAL OVEN GRIEVE MDL. AA-500, 8 cu. ft. volume, 500 deg. F max. temp., 5 kw heat input, 1/3 HP motor, 460 v./ 3 ph./60 Hz, 9 amps, 400 CFM blower, sngl. door, S/N WORTHINGTON 10,000-LB. CAP. WELDING POSITIONER WHEELABRATOR TUMBLE BLAST UNIT TUMBLE BLASTUNIT WHEELABRATOR, 3 cu. ft. (400-lbs.) cap., 1,200- lbs. (steel) abrasive charge, 13" dia. wheel assembly, 7-1/2 HP motor, rubber conveyor belt w/5/16" holes, tumbling ribs on 11" centers, 1/4" thk. cabinet liners, 1/2" thk. long-lifebarrel head liners, belt and bucket elevator, lower screw conveyor media return, S/N BLASTCABINET EMPIRE ABRASIVE PRO-FINISH BLAST CABINET MDL. PF4848, S/N 4531, (S/N C-13665) w/recovery unit (Mdl. PF-4848, S/N 45314). INDUSTRIAL AIR COMPRESSOR INGERSOLL-RAND MDL. T30, 2-stage lubricated compressor, 160 PSI (11 bar) max. pressure, 52.8 gal. receiver, 35.8 CFM piston displacement, 10 HP motor, tank mtd., S/N N.A. < EMPIRE ABRASIVE PRO-FINISH BLAST CABINET GRIEVE UNIVERSAL OVEN ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING AT THIS AUCTION. Go to and click on on our calendar page for this auction sale. 18% BUYER S PREMIUM WILL APPLY INGERSOLL-RAND TANK-MOUNTED INDUSTRIAL AIR COMPRESSOR 11

12 EAST HOUSTON, TEXAS ONLINE AUCTION SALE DATE: BIDS START CLOSING ON THURSDAY, SEPTEMBER 8 AT 10:00 A.M. LOCATION C KNUST-GODWIN 3110 Dunvale, Houston, Texas INSPECTION: Wednesday, September 7, from 7:30 A.M. 3:30 P.M., Metal Craft Gate PRECISION SLANT BED LATHE OKUMA AND HOWA MDL. HL-20, Fanuc 16i control, " sw., " centers, RPM, " dia. " jaw chuck, -pos. tool turret, tailstock. TILT-FRAME VERTICAL BANDSAW HEM 20" MDL. V100HLM-3, 18" x 22" cap., 1-1/4" blade size, 5 HP, dual pwr. vises, pwr. tilt w/d.r.o., digital blade spd., recorder, infeed roller tbl., S/N EDM SODICK EDM, More Details to Follow ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING AT THIS AUCTION. Go to and click on on our calendar page for this auction sale. THIS BROCHURE IS SUBJECT TO CHANGE. ITEMS BEING ADDED DAILY. THIS ITEM IS NOT IN THE AUCTION. IT IS FOR SALE BY PRIVATE NEGOTIATION. CALL RON MOORE AT (713) FOR DETAILS. 12 ROBOTIC BEAM COPING LINE KRANENDONK MDL. CCS1250, 2012, robotic beam cutting cell, ABB IRB axis robot, approx. 100' of infeed/outfeed conveyor, 1250 mm width, 550 mm ht., 3D profiling software, oxy-fuel, S/N N.A. 2012

13 LOCATION F DIXIE CULLEN INTERESTS, INC East Freeway Houston, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M. or By Appointment, Cathy (713) KINGSTON 30" OIL COUNTRY HOLLOW-SPINDLE LATHE, ALTERNATIVE VIEW KINGSTON 30" OIL COUNTRY HOLLOW-SPINDLE LATHE HOLLOW-SPINDLE LATHE KINGSTON 30" OIL COUNTRY MDL HK-3000, new 2007, 12/5" spndl. bore, 30" swing over bed, 20.5" swing over cross slide, 118" dist. btwn. centers, spndl. spds.: RPM, front and rear 4-jaw chucks, steady rest, taper attachment, 20 HP motor, S/N G. VERTICAL BORING MILL 42" BULLARD CUTMASTER, 42" plain tbl., 5-pos. pwr. turret, spds.: RPM, side head w/4-pos. turret, 30 HP main drive motor, S/N MORI SEIKI SLANT BED LATHE SLANT BED LATHE MORI SEIKI MDL. LL-7, Fanuc 6TB control, 42.9" sw. over bed, 20.4" swing over cross slide, 6.75" hole through spindle, 31.5" dia. chuck, 50 HP motor, spndl. spds.: 6 1,150 RPM, (2) 4-pos. turrets, chip conveyor, splash guards and doors, S/N 150. MORI SEIKI SLANT BED LATHE, ALTERNATIVE VIEW 18% BUYER S PREMIUM WILL APPLY PROXY BIDS If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) for instructions, or go to our website at 13

14 LOCATION G DeVRIES INSTRUMENTS 5510 Brystone Drive Houston, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M. or By Appointment, Call (XXX) XXX-XXXX EDM MACHINES SODICK MOLD MAKER MDL. 5 PRECI- SION DIE SINKER TYPE, Mdl. TX-22 RS232 color large screen control, spndl. chuck, manual system 3R, Dielectric filtration system gal., max. workpiece weight 2,200-lb., X-, Y-, and Z-axes travel 19.6" x 15.7" x 13.7", tbl. dimensions (W x D) 35.4" x 19.6", work tank inside dimensions 43.3" x 31.4" x 17.7", max. electrode weight 220-lb., clearance, platen to tbl. 15.0" to 28.7", machine tool dimensions 67.0" x 63.6" x 103.6", machine tool weight 6,600-lbs., filtration system dimensions 81.9" x 33.9" x 36.3", S/N T-4101 (1996). SODICK MOLD MAKER MDL. 3 PRECI- SION DIE SINKER TYPE, Mdl. TX-21 RS232 color large screen control, spndl. chuck, manual system 3R, Dielectric filtration system gals., max. workpiece weight 1,210-lb., X-, Y-, and Z-axes travel 12" x 8" x 10", tbl. dimensions (W x D) 23.6" x 11.8", work tank inside dimensions 35.4" x 20.0" x 12.5", max. electrode weight 110-lb., clearance, platen to tbl. 11.8" to 21.6", machine tool dimensions 50.4" x 46.7" x 83.1", machine tool weight 3,520-lbs., filtration system dimensions 32.7" x 51.2" x 37.2", pwr. requirements: 210/220 v., 10.5 kva, 3 ph., 70 PSI, 50/60 Hz, S/N T-8342 (1995). HARDBANDING SYSTEM ARC SPECIALTIES SYSTEM, 64" longitudinal head travel, 16" 3-jaw chuck workholding device, Miller Deltaweld Mdl. 651 welding pwr. source, S/N KA845306, Miller Mdl. 1A weld control, Miller cooling radiator, system, S/N N.A. ARC SPECIALTIES HARDBANDING SYSTEM PHOTO TO COME ENGINE LATHES CLAUSING 18" X 72" MDL. 8052, spds.: 20 1,600 RPM, 12" 4-jaw chuck, threading, 3" spndl. hole, S/N VICTOR 16" X 40" CAP. MDL. 1640B, spds.: 33 2,000 RPM, 2" spndl. hole, inch/metric threading, toolpost, Newall DP7 2-axis DRO, no chuck, S/N CLAUSING COLCHESTER 13" X 42" MDL. 8015, S/N N.A. VERTICAL TURRET MILLS (2) ALLIANT 9" X 50" TABLE, 60 4,500 RPM, pwr., long. tbl. feed, Mituyoyo DRO on one, no DRO on the other, S/N , S/N N.A. BRIDGEPORT 9" X 48" TABLE, 60 4,500 RPM, pwr., long. tbl. feed, S/N N.A. PHOTO TO COME PLANT SUPPORT MACHINERY ECONOLINE MDL. RA-36-1 REACH-IN TYPE SAND BLAST CABINET, S/N E ; RAMPE MDL. V1- BRADER MACHINE TYPE VOF-12 DEBURRING TUM- BLER, S/N ; AIRFLOW SYSTEMS MDL. DUST-PAK DUST EXTRACTION SYSTEM. FORKLIFT KOMATSU 5,000-LB. CAP. MDL. FG-25ST-11, gasoline pwrd., S/N (out of service). DON T MISS THIS HUGE ONLINE SALE! LOCATION H EAST HOUSTON MANUFACTURING FACILITY Market Street Channelview, Texas INSPECTION: Wed., Sept. 7, from 9:00 A.M. to 4:00 P.M. or By Appt., Call Jean Harris Jr. (713) HORIZONTAL BORING MILL 6" GRAY PLANER-TYPE HORIZONTAL BORING MILL, 6" spndl. dia., #55 spndl. taper (w/power draw bolt), RPM spndl. spds., 84" x 248" tbl., 228" tbl. cross travel, 84" headstock vert. travel, 42" column travel, Newall DRO, facing head, tailstock w/powered vert. travel coupled to headstock, operator platform, 6" x 160" boring bar, misc. tooling, updated electrics, S/N N.A. 14

15 SALE DATE: BIDS START CLOSING ON THURSDAY, SEPTEMBER 8 AT 10:00 A.M. LOCATION I MTD MANUFACTURING LLC FM 1462 Road Alvin, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M. MINSTER 250 T. CAP. HEVI-STAMPER STRAIGHT-SIDE PRESS STRAIGHT-SIDE PRESSES MINSTER 150 T. CAP. MDL. P PIECEMAKER, new 1966, 3' x 4' x 6" thk. bolster, 20"W. x 14" ht. window, 4" slide adj., 3-1/2" stroke, air clutch, light safety control, S/N P MINSTER 250 T. CAP. MDL. E HEVI- STAMPER, new 1963, 36" x 84" x 5" thk. bolster, 19"W. x 20" ht. window, air clutch, dbl. geared, 30/26 SPM, 10" stroke, 6" slide adj., 31" shut ht., Link System 2500 programmable limit switch, S/N E OBI PRESS MINSTER 75 T. CAP. MDL. 7, 36" x 24" bolster, spds.: SPM, 4" stroke, 4" slide adj., 15" shut ht., air clutch, S/N N.A. FEEDERS CWP SERVO MAX II MDL. SMX12, 12"W., R-L operation, S/N SMX CWP SERIES SERVO MAX SE MDL. SMXSF12, S/N P.A. INDUSTRIES ULTRA VANTAGE SEQUENTIAL SERVO ROLL FEED, 10"W. cap. STRAIGHTENERS ROWE MDL. C6-30,.0 0 min. thickness,.150 max. thickness, S/N ROWE MDL. C-30,.020 mild steel min.,.150 mild steel max., 30"W. cap., S/N MINSTER 150 T. PIECEMAKER STRAIGHT-SIDE PRESS UNCOILERS LITTELL MDL , S/N COE MDL. CPR6018, 6,000-lb. cap., S/N LITTELL 18"W. (2) COE. RECOILERS LITTELL MDL. 40, S/N N.A. AMERICAN STEEL LINE 4,000-LB. CAP. MDL. 60, S/N ENGINE LATHE JET 13" X 40" MDL. BD-1340T, 1-17/32" spndl. hole, Stock No , S/N 311-B-341R. ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING AT THIS AUCTION. Go to and click on on our calendar page for this auction sale. MINSTER 75 T. CAP. MDL. 7 OBI PRESS CWP SERVO MAX II FEEDER CWP SERVO MAX SE FEEDER ROWE STRAIGHTENER JET 13" X 40" ENGINE LATHE 15

16 LOCATION I, continued < CASER 5' X 11" RADIAL ARM DRILL JET MDL. JTM-4VS VERTICAL TURRET MILL ROLL-IN VERTICAL BANDSAW SALE DATE: BIDS START CLOSING ON THURSDAY, SEPTEMBER 8 AT 10:00 A.M. RADIAL ARM DRILL CASER 5' X 11" MDL. F.32, S/N N.A. FLOOR-TYPE DRILL PRESS CLAUSING, spds.: 330 4,000 RPM, S/N N.A. VERTICAL TURRET MILLS JET MDL. JTM-4VS, 9" x 48" tbl., Tpac Tools 2-axis D.R.O., spds.: 500 4,200 RPM, 3 HP motor, pwr. long. tbl. feed, S/N KBC, manual, no pwr. feeds (out of service, considered parts only). VERTICAL BANDSAW ROLL-IN, 10" throat, S/N N.A. WELDING MACHINE MILLER MDL. 330A/BP. THIS BROCHURE IS SUBJECT TO CHANGE. ITEMS BEING ADDED DAILY. AUTOMATIC RECIPROCATING SURFACE GRINDER OKAMOTO MDL. M1632N, 16" x 32" magnetic chuck, Walker chuck control, Anilam Microwizard 2-axis D.R.O., S/N HAND-FEED RECIPROCATING SURFACE GRINDERS HARIG MDL. 618, 6" x 18" magnetic chuck, S/N N.A. CHINESE BRAND, new 1990 (no chuck or grinding wheel, probably scrap). UNIVERSAL O.D./I.D. GRINDER PARKER-MAJESTIC MDL , 4 HP motor, 6-jaw chuck, S/N C-78 (out of service). ROTARY SCREW-TYPE AIR COMPRESSORS QUINCY MDL. QSB-30, new 2005, 30 HP motor, 22,358 H.O.M., S/N UN CHICAGO PNEUMATIC MDL. QRS-15, new 2008, 15 HP motor, horiz. air receiver, 9,265 H.O.M., S/N CA QUINCY 30 HP ROTARY SCREW-TYPE AIR COMPRESSOR 2008 CHICAGO PNEUMATIC 15 HP ROTARY SCREW-TYPE AIR COMPRESSOR OKAMOTO AUTOMATIC RECIPROCATING SURFACE GRINDER 16 PARKER-MAJESTIC UNIVERSAL O.D./I.D. GRINDER HARIG HAND-FEED RECIPROCATING SURFACE GRINDER

17 LOCATION J ORMROD PRECISION TOOLING 1625 Airport Road, Conroe, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M CLAUSING MULTITURN 3000 LATHE PROTO TRAK VERTICAL MILLING MACHINE BIRMINGHAM MDL. BPS1642 VERTICAL MILLING MACHINE LATHE CLAUSING MULTITURN 3000 MDL. 3000MT, new 2012, Fanuc Series Oi-TD control, 2,000 RPM spndl. spds., 3.07" hole thru spndl., approx. 16" dia. 4-jaw chuck, 11.7" X-axis travel, 55" Z-axis travel, S/N NG8002. VERTICAL MILLING MACHINE PROTO TRAK MDL. TRAK DPMSX5P, Proto Trak SMX control, 12" x 50" T-slotted tbl., 5 HP head, #40 taper spndl., 40" X-axis travel, 20" Y-axis travel, 23.5" Z-axis travel, spds.: 40 5,000 RPM (in two ranges), S/N 121DM VERTICAL MILLING MACHINE BIRMINGHAM MDL. BPS1642, 9" x 42" T-slotted tbl. w/pwr. feed, 3-axis D.R.O., 2 HP head, assorted collets, S/N ENGINE LATHE LEBLOND REGAL MAKINO SERVO SHIFT APPROX. 16" X 60", 9-3/4" dia. 3-jaw chuck, S/N 15C-576. SINKER EDM MACHINES CHARMILLES MDL. FORM 20, 3-axis D.R.O., 12" X-axis, 10" Y-axis, 8" Z-axis, S/N EURO SPARK MDL. 740, Mdl. 50A control, 2 KVA, 12" x 17" tbl., 15" x 21" tank, S/N E4085K. EDM HOLE POPPER/DRILL CHARMILLES MDL. DRILL11EDM HOLE POPPER TYPE, new 2010, S/N CYLINDRICAL GRINDERS BROWN & SHARPE 10" X 20" MDL. 1020U, S/N CINCINNATI 10" X 48", Filmatic headstock, 1.5 HP workhead, 15 HP wheelhead,, 30" wheel cap., coolant filtration system, unused 30" wheel, S/N 3P2E5E-5. PLAIN CYLINDRICAL GRINDER BROWN & SHARPE 14" X 30", S/N (for rebuild for parts only). O.D./I.D. UNIVERSAL GRINDER BROWN & SHARPE 14" X 36" MDL. 1436U, D.R.O., swing-down internal head, swivelling wheelhead, hyd. fluid filtration, Brown & Sharpe tbl. alignment system, S/N UNIVERSAL INTERNAL GRINDER CINCINNATI HEALD 9" X 19" MDL. 273, 5 HP spndl. motor, swivelling workhead, Redhead spndl., S/N 1136E2. INTERNAL GRINDERS CINCINNATI HEALD 12" X 19" MDL. 272 SIZEMATIC, S/N CINCINNATI HEALD 9" x 19" MDL. 273A, 5 HP spndl. head CHARMILLES FORM 20 SINKER EDM MACHINE CHARMILLES EDM HOLE POPPER/DRILL EURO SPARK MDL. 740 SINKER EDM MACHINE 17

18 BROWN & SHARPE 14" X 36" O.D./I.D. UNIVERSAL GRINDER BROWN & SHARPE RECIPROCATING-TYPE SURFACE GRINDER LOCATION J, continued RECIPROCATING-TYPE SURFACE GRINDER BROWN & SHARPE MDL MICROMASTER, 12" x 36" magnetic chuck, S/N SURFACE GRINDER CLAUSING MDL. CSG-618H, new 11/2011, 6" x 18" magnetic chuck, C.S. Walker Smart Chuck control, dust collector exhaust system, S/N E1TAA0273. TOOL & CUTTER GRINDERS MERLIN MDL. NR-1, S/N SANFORD MFG. CORP., S/N SG VERTICAL BANDSAW DAKE PARMA WORK-A-MATIC MDL , approx. 18" x 20" tbl., approx. 12" throat, S/N METAL CUTTING BANDSAW CUSTOM 4-1/2", Mdl SHOP PRESS SUNEX TOOLS 20 T. CAP. MDL. 5220, 24" dist. btwn. uprights, variable peg-type ht. control. FORKLIFT HYSTER 2,900-LB. CAP. MDL. S50XM, LP gas pwrd., 240" lift ht., 41" forks, side shifter, cushion tires, S/N D187V 29966A. CINCINNATI HEALD 9" X 19" UNIVERSAL INTERNAL GRINDER CINCINNATI 10 x 48 CYLINDRICAL GRINDER DON T MISS THIS HUGE ONLINE SALE! < DAKE PARMA WORK-A- MATIC VERTICAL BANDSAW CLAUSING SURFACE GRINDER 18 HYSTER 2,900-LB. CAP. FORKLIFT

19 TAYLOR 70,000-LB. CAP. FORKLIFT TAYLOR 33,000-LB. CAP. FORKLIFT LOCATION K DALLAS AREA STORAGE FACILITY 2120 North Loop 12, Irving, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 3:00 P.M. or By Appointment (972) LARGE CAPACITY FORKLIFTS TAYLOR 70,000-LB. CAP. MDL. THX350L, new 2009, diesel, 70,000- lb. 24" load center, 35,000-lb. 48" load center, 156" standard mast, pneumatic tires, fork positioner, 96" forks, S/N TAYLOR 70,000-LB. CAP. MDL. THX350L, new 2009, diesel, 70,000- lbs. 24" load center, 35,000-lb. 48" load center, pneumatic tires, fork positioner, 96" forks, S/N TAYLOR 33,000-LB. CAP. MDL. T330M, new 2007, 156" standard mast, side shift, S/N FORKLIFTS YALE 15,500-LB. CAP. MDL. GLC155VXNGJE088, new 2007, LPG, 149" triple-stage mast, 149" lift ht., cushion tires, S/N C879V01506E. HYSTER 15,500-LB. CAP. MDL. H155XL2, new 2005, diesel, 181" triple-stage mast, side shift, 2,761 H.O.M., forks???, S/N G006V03017C. YALE 15,500-LB. CAP. MDL. GDP155CANPBE100, new 2005, diesel, 181" side shift, 100" triple-stage mast, pneumatic tires, 3,784 H.O.M., S/N B878V01878C. YALE 15,500-LB. CAP. MDL. GLC155CANGBE098, new 2005, LPG, 181" triple-stage mast, side shift, cushion tires, S/N B879N01763C. TOYOTA 6,500-LB. CAP. MDL. 7FGCU32, new 2005, LPG, 87" quad-stage mast, 258" max. lift ht., cushion tires, 42" forks, S/N TOYOTA 5,000-LB. CAP. MDL. 8FGCU25, LPG, 83" triple-stage mast, 189" max. lift ht., cushion tire, 42" forks, S/N YALE 5,000-LB. CAP. MDL. GLP050VXNVSE084, new 2011, LPG, 84" triple-stage mast, 192" lift ht., pneumatic tires, side shift, 42" forks,??? H.O.M., S/N B875V06673J. THIS BROCHURE IS SUBJECT TO CHANGE. ITEMS BEING ADDED DAILY TAYLOR 70,000-LB. CAP. FORKLIFT AS NEW AS 2007 YALE 15,500-LB. CAP. FORKLIFT HYSTER 15,500-LB. CAP FORKLIFT < YALE 15,500-LB. CAP. FORKLIFT TOYOTA 6,500-LB. CAP. FORKLIFT YALE 5,000-LB. CAP. FORKLIFT 19

20 LOCATION K, continued IRVINE, TEXAS YALE 5,000-LB. CAP. FORKLIFT HYSTER 5,000-LB. CAP. FORKLIFT YALE 5,000-LB. CAP. FORKLIFT FORKLIFTS, continued YALE 5,000-LB. CAP. MDL. GLC050VXNVSE088, new 2010, LPG, 85" triplestage mast, 200" lift ht., cushion tires, side shift, 42" forks, S/N A910V16365H. YALE 5,000-LB. CAP. MDL GLC050, new 2010, LPG, 88" triple-stage mast, 200" lift ht., cushion tires, 42" forks, S/N A810V16357H. HYSTER 5,000-LB. CAP. MDL. H50FT, new 2008, LPG, 83" triple-stage mast, 189" lift ht., pneumatic tires, side shift, 42" forks,??? H.O.M., S/N L177V02730F. YALE 5,000-LB. CAP. MDL. GLC050VXNVSE084, new 2007, LPG, 84" triplestage mast, 195" lift ht., cushion tires, side shift, 42" forks, S/N A910V08948E. YALE 5,000-LB. CAP. MDL. GLC050VXNGSE085, new 2006, LPG, 85" triplestage mast, 198" lift ht., cushion tires, side shift, 42" forks, S/N A910V06539D. HYSTER 5,000-LB. CAP. MDL. S50FT, new 2006, LPG, 83" triple-stage mast, 189" lift ht., cushion tires, side shift, 42" forks, F187V08072D. YALE 5,000-LB. CAP. MDL. GLC050VXNVSE085, new 2005, LPG, 85" triplestage mast, 198" lift ht., cushion tires, side shift, 42" forks, S/N A910V03505C. YALE 5,000-LB. CAP. MDL. GLC050VXNSWE085, new 2005, LPG, 85" triplestage mast, 198" lift ht., cushion tires, side shift, 42" forks, S/N A910V13367F. YALE 3,000-LB. CAP. MDL. GLC030VXNURE082, new 2009, LPG, 82" triplestage mast, 189" lift ht., cushion tires, side shift, 42" forks, S/N C809V04802G. (4) HYSTER 3,000-LB. CAP. MDL. H30FT, new as???, LPG, 62" standard mast, 90" lift ht., S/N???, S/N???, S/N???, S/N???. (4) YALE 3,000-LB. CAP. MDL. GLP030, new as???, LPG, 62" standard mast, 90" lift ht., pneumatic tires, 42" forks, S/N?????, S/N????, S/N /????, S/N????. THIS BROCHURE IS SUBJECT TO CHANGE. ITEMS BEING ADDED DAILY. PERSONNEL CARRIER TAYLOR DUNN MDL. SS-536, new 2009, S/N PALLET JACKS HYSTER 8,000-LB. CAP. MDL. B80ZAC, new 2007, 27 x 84, no battery. HYSTER 4,000-LB. CAP. MDL. W40Z, new 2010, no battery, S/N 20538H. TUGS (3) YALE MDL. MTR700LEN24T ELECTRIC TUGS, new , no battery, S/N AP09N01692D, S/N A817N06083V, S/N A817N06082V. (3) MASSEY FERGUSON TOW TRACTORS MDL. MF1010, gas, S/N 5151, S/N 13281, S/N A&G TOW TRACTOR MDL. AG1703, gas, S/N BOOM CRANE PETTIBONE 15 T MDL. 30MKP BOOM CRANE, Detroit diesel, 26' boom, S/N 089A17318P. SCISSOR LIFT MANLIFT MDL. SM2232E, 24v., 22' lift, S/N YALE 5,000-LB. CAP. FORKLIFT 2009 HYSTER 5,000-LB. CAP. FORKLIFT 2009 YALE 5,000-LB. CAP. FORKLIFT 2007 YALE 3,000-LB. CAP FORKLIFT 20 YALE 3,000-LB. CAP. FORKLIFT YALE 5,000-LB. CAP. FORKLIFT

21 LOCATION L PMI SHIP CHANNEL STORAGE YARD Greens Port Industrial Park Stored Adjacent to General Welding Building Industrial Road, Gate 5/Bldg. 38-W Houston, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M. or By Appointment, Call Ron Braman (713) LARGE CAPACITY FORKLIFT CLARK 70,000-LB. CAP. MDL. CY700, Detroit Diesel 6V-53N engine, 2-stage mast, 248" lift ht., hyd. fork positioner, pneumatic tires, 9' forks, S/N Y LOCATION M TEXAS FORKLIFT 7904 Irvington Blvd., Houston, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M. or By Appointment, Call Kent Gasaway (832) FORKLIFTS TAYLOR 18,000-LB. MDL. FG-006G, Perkins diesel, 119" mast ht., load center 24", 68"L. x 7"W. forks, approx. weight 30,000-lb., S/N S-FI CATERPILLAR ELECTRIC MDL. 2EC23E, new 2001, 5,000-lb. lift cap., side shift, S/N A2EC < TAYLOR 18,000-LB. CAP. FORKLIFT LOCATION N COUNTY FORKLIFT 1201 Aldine Bender Houston, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M. or By Appointment, Call Eddie Bancroft (281) FORKLIFT CLARK 15,500-LB. MDL. CMP75S, Perkins diesel, 240" lift ht. (168" lowered), side shifting, fork positioner, reconditioned transmission, approx. 10,200 H.O.M., S/N CMP TAYLOR 18,000-LB. CAP. FORKLIFT CATERPILLAR 5,000-LB. CAP. ELECTRIC FORKLIFT DON T MISS THIS HUGE ONLINE SALE! 21

22 LOCATION O STONE MACHINERY MOVERS WAREHOUSE Henry Harris Road, Conroe, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M. DAEWOO SOLA 323 EXCAVATOR CATERPILLAR 30,000-LB. CAP. FORKLIFT THIS BROCHURE IS SUBJECT TO CHANGE. ITEMS BEING ADDED DAILY. EXCAVATOR DAEWOO SOLA 323. LARGE CAPACITY FORKLIFT CATERPILLAR 30,000-LB. CAP. MDL V300B, CAT 3208 diesel engine, 2-stage mast, 218" lift ht., side shift, pneumatic tires, 8' forks, S/N 72Y FORKLIFTS YALE 12,000-LB. CAP. MDL. GLC 120SB096, LP Gas, 125" lift ht., cushion tires, S/N N CAT 5000 MDL. DP25K, 3' forks, S/N AT SCISSOR LIFT HAULOTTE COMPACT MDL. 2032E. DRILL PRESS NORTHERN INDUSTRIES MDL. 1720F, 1 HP, 120 v., 16 spd., Item # BANDSAW KALAMAZOO MDL. 9A, 1/2" blade, S/N MISCELLANEOUS CANTILEVER RACK, 16' W. x 10' x 1' arms; LARGE SELECTION OF RIGGING CHAIN, 3 x 4 x 15 H.; CHAIN HOIST, up to 3 T.; LARGE SELECTION OF OPEN END w/racks and hand tools; LARGE QUANTITY OF TRAILER STRAPS; TORCH CARTS; RIGGING SCALES, 24,000-lb. cap.; RIGGING SLINGS; VIDMAR CABINET, 6-drawer w/welding accessories; H.D. WELDING TABLE, 4' x 5' w/wilton 6" vise, large selection of C-clamps; CRAFTSMAN CHAIN SAWS, 15"; MAGNETIC DRILL; HOUGEN; (2) GANG BOX, 6'W. X 5'D. X 7'L.; WELDER/GENERATOR, portable., gas; SHIPPING CONTAINERS. BOAT 31' IMP CENTER CONSOLE, on 6" channel iron galvanized trailer w/brand new tires, (2) 5.8 PCM motors w/volvo 280 outdrives, Port motor has 280 hrs. exhaust manifold has been nickle plated inside and out. Starboard motor has fresh major overhaul balanced w/forged pistons and aluminum heads w/ roller valve train (mild performance for low end torque and efficiency). Has a VHF radio and older depth finder. YALE 12,000-LB. CAP. FORKLIFT 22 31' IMP CENTER CONSOLE BOAT

23 EAST HOUSTON, ONLINE TEXAS AUCTION DON T MISS THIS HUGE ONLINE SALE! SALE DATE: BIDS START CLOSING ON THURSDAY, SEPTEMBER 8 AT 10:00 A.M. LOCATION O, continued KALAMAZOO BANDSAW 16' ODOM TRAILER 4' X 3' MOTORCYCLE TRAILER BOSSKI ATV WAGON BED TRAILER WIRE FEED MILLERMATIC 141 MDL , 110 v., S/N MF N. PLASMA CUTTER PROFESSIONAL THERMAL DYNAMICS MDL. CUTMASTER 82, 112 v., 20 amps., S/N AC/DC WELDER BOBCAT 250, 20 v. 200 amps., 100% duty cycle on roller cart, S/N LG GRINDER 6" DOUBLE-END GRINDER. TRAILERS 16' ODOM TRAILER, 14,000-lb. G.V.W. MOTORCYCLE TRAILER, 4' x 3' aluminum LED tail lights. ATV WAGON BED BOSSKI, tandem-axles, brake light, 2" ball, aluminum construction on steel frame, pneumatic ATV style tires, 3-1/2' x 6'. GRAPLER ATTACHMENT ARM ARMSTRONG AG MDL. APUM, S/N VERTICAL COMPRESSOR QUINCY, 7.5 HP, 2-stage, 80 gal., CFM 100 psi, CFM 175 psi, voltage 230, singlephase cast iron compressor. GENERATOR HONDA EM5000IS, 120/240 electric start, gas, max. output 5.0 KVA. MISCELLANEOUS MISC. STREET PLATE VARIOUS LENGTHS UP TO 30'; MISC. RIGGING BEAMS; DOCK PLATE; TELESCOPING FORK BOOM; PALLET JACK. HAULOTTE COMPACT SCISSOR LIFT THERMAL DYNAMICS PLASMA CUTTER PROFESSIONAL ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING AT THIS AUCTION. Go to and click on on our calendar page for this auction sale. NORTHERN INDUSTRIES DRILL PRESS AND 6" DOUBLE-END GRINDER 23

24 LOCATION P LABELLECO FABRICATION 7335 Frint Road Beaumont, Texas INSPECTION: Wednesday, September 7, from 9:00 A.M. to 4:00 P.M. BEATTY 200 T. X 8' CAP. HYDRAULIC PRESSBRAKE DOALL MDL. TF-14H TILT-FRAME VERTICAL BANDSAW ABELL-HOWE 10 T. OVERHEAD BRIDGE CRANES 24 HYDRAULIC PRESSBRAKE BEATTY 200 T. X 8' CAP., 99" bed, 99" btwn. housings, 31" stroke, 31" daylight, 7.5" w/platen, 18" w/tbl., rapid advance and return, S/N N.A. AUTOMATIC HORIZONTAL BANDSAW HYD-MECH MDL. H-20A 20" X 20" RATED CAP., 20" cap. in rounds, 2" x 22'2" blade size, variable blade spds.: FPM, variable shuttle stroke: 0 36", 10,000-lb. max. work load cap., Hyd-Mech PLC 100 digital touch pad controls, adj. feed rate/force controls, hyd. downfeed, coolant, chip auger, three phase motor and controls, S/N C H, approx. 12,500-lb. TILT-FRAME VERTICAL BANDSAW DOALL MDL. TF-14H, 14" x 21" cap., 230 v./3 ph./60, S/N PIPE PANTOGRAPH VERNON PANTOGRAPH MDL. G, variable speed, travel carriage, 25'L. lift/rotate tbl., oxy fuel cutting head, S/N OVERHEAD BRIDGE CRANES (2) ABELL-HOWE 10 T. X APPROX. 45' SPAN, top running, underhung hoist, P&H Hevi-Lift hoist, center drive, AC pwrd., pendant control. ALL TERRAIN FORKLIFT CASE 586G 6,000-LB. CAP., has lots of new part and hyd. hoses, owner reports that it runs great, S/N JJG LARGE CAPACITY TELEPHONE SYSTEM ESI PHONE SYSTEM W/SERVER, at least (80) handsets included. HYD-MECH MDL. H-20A 20" X 20'' AUTOMATIC HORIZONTAL BANDSAW VERNON PANTOGRAPH MDL. G PIPE PANTOGRAPH CASE 586G 6,000-LB. CAP. ALL TERRAIN FORKLIFT ESI PHONE SYSTEM W/SERVER

25 ONLINE AUCTION HUGE ONLINE AUCTION (14) LOCATIONS IN TEXAS SALE DATE: BIDS START CLOSING ON THURSDAY, SEPTEMBER 8 AT 10:00 A.M. INSPECTION: See Each Location for Inspection Instructions 18% BUYER S PREMIUM WILL APPLY GO TO OUR WEBSITE CALENDAR AT FOR THE LINK TO THE BIDSPOTTER CATALOG. TERMS & CONDITIONS OF ON-LINE AUCTION SALE An 18% Buyer s Premium will apply. A 100% refundable $3,000 (US bidders) or $10,000 (foreign bidders) deposit is required for all webcast bidding unless prior approval has been obtained from the auction company. ALL BIDS ARE MADE AND RECEIVED UNDER THE TERMS HEREINAFTER SET FORTH TO WHICH TERMS BIDDERS AGREE BY MAKING THEIR BID AT THE SALE. THESE TERMS CANNOT BE ALTERED EXCEPT BY THE AUCTIONEER. NO EMPLOYEE HAS AUTHORITY TO MODIFY SAME. THE OWNER AND/OR AUCTIONEER RESERVE THE RIGHT TO ADD TO OR MODIFY THE TERMS OF THE SALES. All payments must be made by Cash, Cashier s Check, Wire Transfer or Company Check with Bank Letter of Guarantee to Plant & Machinery, Inc. (PMI). Here is an example of what your letter should be: [Mr. Customer Name representing Company Name is a customer of this bank. This bank will guarantee unqualified payment to Plant & Machinery, Inc. on the account listed herein up to the amount of $. This letter is good until October 7, 2016.] All bidders are required to give full name, company name, address, phone, fax, address, and bank information when registering. All bidders must register before bidding. All bids must be paid in full within two business days after the bids have closed. The Auctioneer shall determine the bidding increments. Some items may be auctioned with reserve. All purchases must be removed within two weeks after the bids have closed, or, within the timeframe posted on the sale web page. No lot can, on any account, be removed prior to PMI having been paid in full. Removal shall be at the expense, risk and liability of the Purchaser. Purchases will be delivered only on presentation of paid bill. Auctioneer shall not be responsible for goods not removed within the aforesaid time. Riggers, movers, electricians or buyer performing work at the Auction Sites must provide Auctioneer with evidence of insurance. The insurance coverage must be at a level acceptable to Auctioneer and to the Seller. All checks for deposits and balances due shall be payable to the order of PLANT & MACHINERY, INC. unless instructed otherwise. All bills must be paid to the Houston headquarters offices of the Auctioneer at 1304 Langham Creek Drive, Suite 454, Houston, TX, or by wire transfer directly to the bank specified in the wire transfer instructions provided for this on-line auction. The full purchase price on all lots sold to the same buyer must be paid within the time fixed and before removal of any of the goods. QS THE AUCTIONEER SHALL NOT BE RESPONSIBLE FOR THE CORRECT DESCRIPTION, GENUINENESS, AUTHENTICITY OF, OR DEFECT IN ANY LOT, AND MAKES NO WARRANTY IN CONNECTION THEREWITH. NO SALE SHALL BE SET ASIDE NOR ALLOWANCE MADE ON ACCOUNT OF ANY INCORRECTNESS, ERROR IN CATALOGING, OR ANY IMPERFECTION NOT NOTED. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES, ALL ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD AS IS AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED, OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING THEREFROM. Articles purchased may not incorporate approved activating mechanisms, operating safety devices or safety guards, as required by OSHA or otherwise. It is Purchaser s responsibility that articles purchased be so equipped and safeguarded to meet OSHA and any other requirements before placing such articles into operation. Purchaser agrees to indemnify and hold Auctioneer harmless from and against all claims and liabilities relating to the condition or use of the articles purchased or failure of user to follow instructions, warnings or recommendations of the manufacturer, or to comply with federal, state and local laws applicable to such articles, including OSHA requirements, or for proximate or consequential damages, costs or legal expenses arising therefrom. No claims will be allowed after removal of goods from premises. Auctioneer shall not, in any event, be liable for non-delivery or any other matter or thing, to any Purchaser of any lot other than for the return to the Purchaser of the deposit or sum paid on said lot, should the Purchaser be entitled thereto. In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. Lots not paid for and removed within the time allowed herein may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charges of resale, will be charged to the defaulting Purchaser. Persons attending during exhibition, sale or removal of goods assume all risks of damage of or loss to person and property and specifically release the Auctioneer from liability therefor. Neither the Auctioneer nor his principal shall be liable by reason of defect in or condition of the premises on which the sale is held. The Auctioneer reserves the right to withdraw from sale any of the property listed or to sell at this sale property not listed, and also reserves the right to group one or more lots into one or more selling lots or to subdivide into two or more selling lots. Whenever the best interest of a Seller will be served, the Auctioneer reserves the right to sell all the property listed, in bulk. Where items are sold by estimated weight, count or measure, the Purchaser will be billed for and required to pay for the estimated weight, count or measure. If, upon delivery, any shortage exists, the Purchaser will receive a refund at the rate of purchase. If there be an excess, the Purchaser will be required to pay for such excess, at the rate of purchase. Reserve: There are RESERVE amounts attached to selected items in this auction. When bidding, you will be notified by the online bidding system as to whether or not you have met the RESERVE amount. No bid will be considered a winning bid unless the RESERVE amount has been met. A bid in the amount of the RESERVE, or higher, will be considered a winning bid. Please check your bid and bid status before the Lot closes. The Auctioneer reserves the right to reject any and all bids, alter the order of sale, and accept bids made on behalf of the Seller. The record of sale kept by the Auctioneer will be taken as final in the event of any dispute. The Auctioneer is acting as agent only and is not responsible for the acts of its principals. Purchaser acknowledges, as an inducement to Seller to commit Purchaser to bid, that Purchaser has independently inspected the goods bid upon by the Purchaser, and acknowledges to the Seller that Purchaser is acquiring all goods AS IS, WITH ALL FAULTS and WITH REMOVAL AT PURCHASERS RISK AND EXPENSE and agrees to protect, indemnify and hold harmless the Seller from any and all claims, demands, causes of actions, liabilities and judgments relating to the conditions or use of the goods. Seller, if not the same as the Auctioneer, shall have the rights, protections and benefits afforded to the Auctioneer as set forth herein. Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance. ANY ADDITIONAL PROVISIONS OR AMENDMENTS TO THE ABOVE LISTED TERMS WILL BE POSTED TO THE ON-LINE SALE WEB PAGE BY THE AUCTIONEER PRIOR TO THE START OF BIDDING.