OIL & GAS TOOLS AND SOLUTIONS SECO THREADING CASING/TUBING COUPLINGS
|
|
- Augustus Hicks
- 5 years ago
- Views:
Transcription
1 OIL & GAS TOOLS AND SOLUTIONS SECO THREADING CASING/TUBING COUPLINGS
2 THREADING OIL & GAS OIL & GAS TOOLS AND SOLUTIONS SQUARE 1 1/4 SHANK CHASER HOLDERS The two-pin system ensures extremely precise insert positioning from insert to insert as well as plays a key role in the holder s increased rigidity. With more rigidity and support, the holder helps reduce the amount of required threading passes for generating a full thread profile. The new toolholder s pocket seat surface features milled scallops that provide even more chaser insert support. When an insert is mounted in the pocket, the clamping force acts on the scallop pattern and work hardens the seat surface to a hardness of 54 HRc. With high-chrome, tough-to-machine materials in mind, Seco also equipped the new chaser insert holder with high-pressure coolant directed at key cutting areas of the insert. Coolant enters the holder from the back end, travels through an insert cavity directly to the insert s chipformer and into the channels between each tooth. With a maximum output of 210 bar, the Seco holder delivers the industry s highest coolant pressures for thread chasing operations. THE SECO ADVANTAGE Longer, more predictable tool life and lower costs via evenly wearing replaceable inserts Consistent, high-precision thread profiles NEW CER 125 HOLDERS DIMENSIONS INCH EDP DESCRIPTION h b I 1 f 1 I CER MM MM CER MM MM 2 PRODUCT OVERVIEW Both top and axial clamping Two cemented carbide locating pins Scalloped hardened insert pocket seat surface Advanced chipformer geometries 210-bar high-pressure direct coolant capability Simultaneous external push threading and/or internal push/pull threading API thread-style pitches, as well as all common licensed types such as TenarisHydril and Vallourec NEW CHIP-BREAKERS DIMENSIONS INCH EDP DESC. TYPE I d s C C C C C C C C C C C C C C C C C C C C-5705-G C-5805-G C-5905-G
3 THREADING OIL & GAS NEW PITCH-PERFECT, THREAD CHASING Highly versatile, the new Thread Chaser tool features inserts for both push and pull threading of I.D. features. As opposed to single-tooth inserts, Thread Chaser inserts include multi-tooth patterns for fast threading. RANGE OVERVIEW P1 version for.625 inserts P5 version for.984 inserts Two chipformer sizes M.156 and.124 Industry standard 1.00 and 5/8 width inserts CHASERS, METRIC CHIP-BREAKERS Type 1 Type 2 Type 3 Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 NEW CHASER INSERTS EDP DESC. EXTERNAL PITCH INT/ EXT TYPE DIMENSIONS INCH NUMBER CHIP- THREAD FROM COATED I d s t OF TEETH BREAKER PRODUCT CP250T Int C API ROUND 8TPI INT 15.8MM [ a 8 Ext C API ROUND 8TPI CASING EXT 15.8MM [ a 8 Ext API ROUND 8TPI CASING 1/16 EXT MM [ a 8 Ext API ROUND 8TPI CASING 1/16 EXT MM [ a 8 Ext API ROUND 8TPI CASING 1/16 EXT MM [ a 8 Ext C API ROUND 8TPI CASING EXT 1 25MM [ a 8 Ext C API ROUND 8TPI CASING EXT 2 25MM [ a 8 Ext API ROUND 8TPI TUBING 1/16 EXT MM [ a 8 Ext API ROUND 8TPI TUBING 1/16 EXT MM [ a 8 Ext API ROUND 8TPI TUBING 1/16 EXT MM [ a 8 Ext C API ROUND 8TPI TUBING EXT 15.8MM [ a 8 Ext C API ROUND 8TPI TUBING EXT MM [ a 8 Ext C API ROUND 8TPI TUBING EXT MM [ C 8 Int C API ROUND 8TPI INT 25MM [ Int C API ROUND 8TPI INT PULL 25MM [ a 10 Ext C API ROUND 10TPI TUBING EXT MM [ Ext C API ROUND 10TPI TUBING EXT MM [ Int C API ROUND 10TPI TUBING INT 15.8MM [ a 5 Ext C API BUTTRESS 5TPI 1/16 EXT 15.8MM [ Int C API BUTTRESS 5TPI 1/16 CASING INT PULL 15.8MM [ Int C API BUTTRESS 5TPI 1/16 INT 15.8MM [ a 5 Ext API BUTTRESS 5TPI 1/16 EXT 1 25MM [ a 5 Ext API BUTTRESS 5TPI 1/16 EXT 2 25MM [ a 5 Ext API BUTTRESS 5TPI 1/16 EXT 3 25MM [ a 5 Ext C API BUTTRESS 5TPI 1/16 EXT 1 25MM [ a 5 Ext C API BUTTRESS 5TPI 1/16 EXT 2 25MM [ Int C API BUTTRESS 5TPI 1/16 INT PULL 25MM [ a 5 Ext C API BUTTRESS 5TPI 1/16 EXT 25MM [ a 5 Ext API BUTTRESS 5TPI 1/12 EXT 1 25MM [ [ Stock standard, subject to change refer to current price and stock-list 3
4 PIPE: ROUGH EXTERNAL CHAMFER,TURN TAPER PEELING PIPE: CUT THE THREAD THREADING PIPE: FACE & INTERNAL BREAK-EDGE FINISH EXTERNAL CHAMFER FACING 4
5 Turn external chamfer, Face Bore I/D, Taper, Recess, Chamfer Pull thread (away from chuck) Push thread (towards chuck) COUPLINGS: TWIN POCKET TOOLHOLDER COUPLINGS: THREADING TOOLHOLDER LH = PULLING RH = PUSHING 5
6 PROGRAM: COUPLINGS NU C6-MSKNR DBL NU C6-CNR X C6-CNR X 3.1/2 NU 4 NU 4.1/2 NU C6-MSKNL C-DBL 4.1/2 BTC 5 BTC C6-CNL C-X C6-CNL C-X 5.1/2 BTC BTC 7 BTC 7.5/8 BTC BTC BTC 13.3/8 BTC RH = PUSHING LH = PULLING 6
7 C6-CNR X NU NU C6-MSKNR DBL 3.1/2 NU 4 NU C6-CNL C-X 4.1/2 NU C6-MSKNL C-DBL C8-MSKNR DBL C8-CNR X C8-CNR X C8-MSKNL C-DBL C8-CNL C-X C8-CNL C-X 7
8 Follow Seco Tools on Twitter, Facebook, LinkedIn, Blogger and YouTube. Stay up to date on new products and technology, special events, promotions and more. SECOTOOLS.COM/US/FOLLOWSECO NORTH AMERICAN HEADQUARTERS 2805 Bellingham Drive Troy, MI To find an Authorized SECO Distributor near you, please refer to the Distributor Locator on our website: SECOTOOLS.COM/US For technical assistance, call: P GT Copyright 2015 Seco Tools, LLC Printed in USA. All rights reserved. 8
1735 N. 28th Avenue Suite 1 Phoenix, AZ Local: Outside AZ: Fax:
1735 N. 28th Avenue Suite 1 Phoenix, AZ 85009 Local: 602-269-1775 Outside AZ: 877-845-7940 Fax: 602-269-0542 CONTENTS SOLID CARBIDE THREAD MILLS Thread Mill Identification System Carbide Grades Internal
More informationVariable Helix (Steel) - Standard Ballnose. Variable Helix (Steel) - Standard Length SEE WEBSITE FOR PRICE DISCOUNTS
6 Variable Flute (Steel) - 4FL - Standard Length < 7 Variable Flute (Steel) - 4FL - Ballnose Standard Length < NEW 8 Variable Flute (Steel) - 4FL - Stub, Long & Long-reach < NEW 9 Variable Flute (Steel)
More informationTHREADING with QuadCut
2-2008 THREADING with QuadCut External Threading Internal Threading QuadCut Inserts Presentation 3 Technical information 4-7 Code keys 7 Partial profile 8 ISO Metric (M) 8-9 MJ 9 ISO Unified (UN) 9-10
More informationTechnical Data. Infeed Angle C58. preferred methods. radial. flank modified flank alternating flank / 2 infeed. angle of.
Infeed Angle preferred methods radial flank modified flank alternating flank 0 30 angle of angle of 15-29 1 / 2 angle of advantage Cutting on both sides of the thread form places all of the cutting edge
More informationSpiral Mill-Thread. Advantages of Spiral Mill-Thread Tools
Spiral Mill-Thread Advantages of Spiral Mill-Thread Tools The spiral designed tools enable a smooth cutting operation at a high feed rate and reduced machining time. The tools suit a wide range of applications,
More informationSpiral Mill-Thread. Advantages of Spiral Mill-Thread Tools
Spiral Mill-Thread Contents: Contents: ISO UN Whitworth BSPT NPT NPTF Spiral Finishing Toolholders Special Tools Advantages of Spiral Mill-Thread Tools The spiral designed tools enable a smooth cutting
More informationMetal-Max - Standard Ballnose. Metal-Max - Standard Length. Now available as a coolant thru cutter! AlTiN. AlTiN. MTMXB - Std.
2007 Catalog INDEX 4 Metal-Max - 4FL - Standard Length 5 Metal-Max - 4FL - Ballnose Standard Length 6 Metal-Max - 4FL - Stub, Long & Long-reach length 7 Metal Max - Square Corner - Speeds Chart 8 Metal
More informationHigh Performance Carbide Tools. Standard Carbide* Tools
2007 Catalog High Performance Carbide Tools 6 Metal-Max - 4FL - Standard Length < 7 Metal-Max - 4FL - Ballnose Standard Length < 8 Metal-Max - 4FL - Stub, Long & Long-reach length < 9 Metal Max - Square
More informationBurs Toolholders Toolholders. CAT40 ER20 Collet Chucks, Straight Shank. Collet Extension and Parts. CAT40 ER25 Collet Chucks, Straight Shank
Table of Contents Burs 386 394 408 Cylindrical End Cut SB, Uncoated CAT40 ER20 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Jacobs Taper Holders and Parts 387 395 409 Cylindrical Ball
More informationSHRINK FIT TOOLHOLDER TECHNOLOGY CV40 SHRINK FIT HOLDERS - INCH & METRIC 36 CV50 SHRINK FIT HOLDERS - INCH & METRIC 37-38
SHRINK FIT TOOLHOLDER TECHNOLOGY 34-35 CV4 SHRINK FIT HOLDERS - INCH & METRIC 36 CV5 SHRINK FIT HOLDERS - INCH & METRIC 37-38 BT4 SHRINK FIT HOLDERS - INCH & METRIC 39 HSK63A SHRINK FIT HOLDERS - INCH
More informationwerkzeugtechnik WEIß WERKZEUGTECHNIK Special Form Cutters Special Tools for Medical Engineering Precision Milling Tools
werkzeugtechnik WEIß WERKZEUGTECHNIK Special Form Cutters Special Tools for Medical Engineering Precision Milling Tools Weiß Werkzeugtechnik. Uncompromising in form and profile! Highest precision, outstanding
More informationMASTER CATALOG KCPM45.
MASTER CATALOG KCPM45 KSEM Modular Drills KCPM45 Your New Grade for Tough Jobs in Low-Carbon Steel KCPM45 combines a very tough, fine-grain carbide substrate with an advanced multilayer TiAlN coating.
More informationCOLLETS. DESCRIPTION DIN 6388 COLLETS Form A For plain straight shank tools QUICK CHANGE TAPPING. ADAPTERS Bilz type. Positive drive adapters
COETS ESCRIPTION Page ESCRIPTION Page IN 88 COETS Form A For plain straight shank tools 5 QUICK CHANGE TAPPING AAPTERS Bilz type Positive drive adapters 2 IN 88 COETS Form E For threaded straight shank
More informationAPI Gaging Practice. PMC Lone Star Technical Brief Doc. 100 Rev. B
API Gaging Practice Doc. 100 Rev. B David R. Maisch Chief Engineer June 4, 2008 The American Petroleum Institute (API), headquartered in Washington, DC, USA is a world leader in the development of standards
More informationToolholders & Accessories
Toolholders & Accessories Contact us for a fast quote. USA Headquarters 364 email: sales@napgladu.com (800) 457-7468 Canada, Montreal (800) 363-9117 Canada, Toronto (888) 251-2236 Table of Contents Toolholders
More informationFiles for the workshop Machinist s files, DIN series
Files for the workshop Machinist s files, DIN series PFERD produces files for the workshop with the highest quality standards. They achieve a long service life and high stock removal rates. Three application-oriented
More informationWorkholding. Workholding CHUCKS CENTRES 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS STEEL CENTRES 60º PLAINBACK FITTING CARBIDE CENTRES 60º
CENTRES CHUCKS STEEL CENTRES 60º 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS CARBIDE CENTRES 60º Taper Stock Code MT1 014-101 0.25kg MT2 014-102 0.25kg MT3 014-103 0.5kg MT4 014-104 1kg MT5 014-105 2.5kg
More informationTechnical. Scan this QR Code Featured Video
Scan this QR Code Featured Video 223 Lyndex-Nikken Product Warranty Standard Product Lyndex-Nikken Inc., the seller, warrants to the user, who purchases and uses (the User ) the Standard Product, as hereinafter
More informationPRODUCT EXPANSION! New N Geometry in grade IN05S UPDATED
PRODUCT EXPANSION! Bodies: 1.5xD, 3xD, 5xD and 8xD Weldon & Cylindrical Shanks 12xD bodies also available. Refer to NPA NEW-203 Tips: 6.0-25.9 mm Geometries: TPA - Steel TMA - Stainless Steel TKA - Cast
More informationFor Gear, Spline & Rack Manufacturing
For Gear, Spline & Rack Manufacturing INC Advanced Technologies for Gear, Spline and Rack Manufacturing Standard s for Spline Applications Gear Milling System Advantages Super Fast Machining At least 50%
More informationDOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
More informationNIKKEN TOUGH-CUT SKILL REAMER NIKKEN TOUGH-CUT SKILL REAMER
NIKKEN TOUGH-CUT SKILL REAMER Features Photo shows Tough-cut skill Reamer AZMA NITRIDING This is nitriding by a This is nitriding by a sputtering operation, sputtering operation, alongwith with aa glow
More informationCapto-Compatible* Turn/Mill Toolholders
Capto-Compatible* Turn/Mill Toolholders The C4, C5, C6, holders you need, Techniks Certified. ER Collet Chucks End Mill Holders ShrinkFIT Face Mill Arbors Turning Tools & Inserts SlimFIT Holders Built
More informationERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE
ERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the manufacturing of Sulky Hubs. 1973 Parlec begins
More informationJCT Series. Coolant-Through Holders. Excellent Chip Control and Long Tool Life with High Pressure Coolant
JCT Series Coolant-Through Holders Excellent Chip Control and Long Tool Life with High Pressure Coolant Large Holder Lineup for Turning, External Grooving, Cut-off and Threading Easy Connection with High
More informationMACHINE TOOL ACCESSORIES
MACHINE TOOL ACCESSORIES ISO TOOLHOLDERS FOR CNC ROUTERS 33-70 Note: Measure the A dimension with the collet in the nut. Dimensions in Millimeters COLLET PULL STUD DESCRIPTION D A F N NUT WRENCH PROVIDED
More informationCapto-Compatible* Turn/Mill Toolholders
Capto-Compatible* Turn/Mill Toolholders The C4, C5, C6, holders you need, Techniks Certified. ER Collet Chucks End Mill Holders ShrinkFIT Face Mill Arbors Turning Tools & Inserts SlimFIT Holders Built
More informationCAPTO. Switzerland. Made in. Swiss Precision Tools
CAPTO Made in Switzerland Swiss Precision Tools REGO-FIX CAPTO Toolholders As a Certified Sandvik CAPTO manufacturer, REGO-FIX uses new state of the art measuring and grinding systems to create the most
More informationTool Holding For improved thread quality - CNC Rigid Tapping TOOL HOLDING
Tool Holding For improved thread quality - CNC Rigid Tapping TOOL HOLDING SynchroFlex Tapping Attachment with unique Double Flexure Unlike other synchronous tap drivers that use soft plastic components
More informationWHAT HAS CHANGED SINCE THE LATE SEVENTIES (AND WHAT NEVER WILL)
WHAT HAS CHANGED SINCE THE LATE SEVENTIES (AND WHAT NEVER WILL) Remember 1977? Jimmy Carter took office. The Apple II hit stores. And The Jewell Group started providing quality cutting tool solutions to
More informationQuadThread External For Thread Turning
QuadThread External For Thread Turning Scandinavian Tool Systems Scandinavian Tools System AB Our business idea is to offer the best rigid threading system to our customer and be in the front line of cutting
More informationTILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
More informationSliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
More informationDO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS.
DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS. Regardless of whether gears, s, cones or grooves are to be measured; the versatility of Multimar Universal Measuring Instruments
More informationSide block mm Combination element to extend or to combine two stoppers
Clamping tools 45 5D workpiece stopper Side block 10-18 mm Combination element to extend or to combine two stoppers Application: One of the various application of the workpiece stopper is as a versatile
More informationTL Laser Systems for Tool Measurement
TL Laser Systems for Tool Measurement Tool monitoring with a TL laser system is a very flexible solution. The contact-free optical measurement enables you to check even the smallest tools rapidly, reliably
More informationWHAT'S NEW IN MASTERCAM 2018 FOR SOLIDWORKS
WHAT'S NEW IN MASTERCAM 2018 FOR SOLIDWORKS March 2017 WHAT'S NEW IN MASTERCAM 2018 FOR SOLIDWORKS March 2017 2017 CNC Software, Inc. All rights reserved. Software: Mastercam 2018 for SOLIDWORKS Terms
More informationCONVERSION SYSTEMS AND ADAPTERS TO HSK-T
132 133 CONVERSION SYSTEMS AND ADAPTERS TO HSK-T Introduction Designation key 134 Conversion systems, adapters and blanks KS flange adapters 136 137 Extensions and reducers 152 Blanks 153 HSK-T conversion
More informationPrice Each. Bulk Qty.
s subject to change without notice DeWALT SDS+ Masonry Bits Item Number Description Each Bulk Each for Bulk DW5348 BULL POINT 10" SDS+ $ 8.95 DW5350 CHISEL 3/4 X 10 SDS+ $ 8.95 DW5401B25 SDS BIT 5/32 X
More informationIntentionally left blank to reduce file size.
Intentionally left blank to reduce file size. To Our Valued Customers, Welcome to the 2005 edition of our catalog! In this edition, you will find many new tools in such areas as high performance carbide
More informationTake control of your manufacturing
Take control of your manufacturing Achieve higher productivity, reduced costs, and shorter time to market using Autodesk HSM Autodesk HSM 2018 software bundle provides the best value in integrated CAM
More informationDoes everything rotate around precision? no problem with Micromar.
Does everything rotate around precision? no problem with Micromar. The latest information on MICROMAR products can be found on our website: www.mahr.com, WebCode 2 Micrometers belong alongside calipers
More informationЗаказ инструмента: 8 (343) Start-up tool kits for new machines
Start-up tool kits for new machines Table of content Introduction... 4 Turning centres Kit contents... 5 External turning shank... 6 External turning shank with high precision coolant... 7 Internal boring
More informationJCT Series. Coolant-Through Holders for Small Parts Machining. Excellent Chip Control and Long Tool Life with High Pressure Coolant
JC Series Coolant-hrough Holders for Small Parts Machining Excellent Chip Control and Long ool Life with High Pressure Coolant Capable of Pressure up to 2,900 psi Large Holder Lineup for urning, External
More informationRECOMMENDED CUTTING CONDITIONS
P FH7020 MP6120 MP6130 VP30RT 850 750 685 620 Mild Steel 180HB (7001000) (580910) (515845) (450880) 180280HB 280350HB 3545HRC 550 (400700) 450 (300600) 450 (300600) 480 (320630) 350 (190500) 350 (190500)
More informationNorth US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
More informationTH240g+Ko TH240g+Ko Pneumatic vise grip TH240g+2Ko Pneumatic vise grip TH240g + Ko TH240g + 2Ko Ordering information
Pneumatic vise grip Single pneumatic cylinder Sample size: 0 18 mm (depending on jaws) Weight: 1.55 kg each grip (without jaws) TH240g+2Ko Pneumatic vise grip Dual pneumatic cylinder Sample size: 0 18
More informationHoltest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage
C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic
More informationpowrgrip Switzerland Made in Swiss Precision Tools
powrgrip Made in Switzerland Swiss Precision Tools PG Safe, Precise, Cost-effective The REGO-FIX powrgrip is an extremely precise, safe, and cost-effective Press-Fit system, perfect for your high-speed,
More informationStart-up tool kits for new machines
Start-up tool kits for new machines Get your machine tooled up! A new machine is a major investment, so a short payback time is always welcomed. To make it easy to get started with your new machine, we
More informationdia. grit type R type S eblend surface conditioning disc
QUICK CHANGE Discs blend Mini E Quick Change Flap Discs The Mini E flap discs are manufactured using the best zirconia abrasive on a heavy cloth backing. Mini E discs features a quick change system using
More informationFor MEGA MICRO CHUCK Available in 0.1mm diameter increments to suit all the cutting tool shank sizes with maximum accuracy. Despite their compact size
MICRO COLLET NEW BABY COLLET NBC ENDMILL COLLET COLLET EJECTOR MEGA E COLLET STRAIGHT COLLET for MILLING CHUCK PERFECT SEAL (MPS / BPS / EPS) PULL STUD BOLT POINT MASTER PRO PMP POINT MASTER PMC POINT
More informationDrilling Machine. Presenter: G. Tulloch
Drilling Machine Presenter: G. Tulloch Drilling machine A power operated machine tool which holds the drill in its spindle rotating at high speeds and when actuated move linearly against the work piece
More informationACUTABOV WOOD 60 BI-METAL HOLESAWS KIT 64 PRO-FIT MULTIPURPOSE TCT HOLESAWS KIT PAGE
ACUTABOV WOOD PAGE 60 BI-METAL HOLESAWS KIT 64 PRO-FIT MULTIPURPOSE TCT HOLESAWS KIT 52 Alpha_PG_09.pdf 52 23/12/08 11:01:44 AM E PAGE 54 TURBOMAX AUGER BITS 55 TURBO-BORE SPADE BITS 56 SHIPPER AUGERS
More informationPREMIUM QUALITY CUTTING TOOLS FOR PRECISION MACHINING
PREMIUM QUALITY FOR PRECISION MACHINING ENDMILLS DRILLS REAMERS TAPS BURRS SPECIALTY TOOLS AND MORE... A BlackHawk Industrial Corporate Brand Sold Exclusively by BlackHawk Industrial Pioneer Tool is a
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationServo-conventional milling machine
Universal Milling Machine Servo-conventional milling machine Control developed and built in Germany Positioning control for traveling pre-selected paths on all axes Constant cutting speed, whereby the
More informationAQDEXOH10D, 15D, 20D, 25D, 30D, 40D, PLT AQMD
New USA Stock Items AQUA DRI EX CARBIDE DRI SERIES Aqua EX 2D, D Aqua EX Oil Hole D, D, D Aqua EX Deep Hole D, 1D, 20D, 2D, 0D, 0D Aqua EX Oil Hole Pilot Aqua EX Oil Hole Three Flute D, D Aqua Micro Metric,
More informationInch Dial Test Indicators Lever Type see page 97.
Dial Test Indicators Most modern methods are applied in the production of our high quality Dial Test Indicators. They are both sensitive and shock-resistant. Here are some of the advantages applicable
More informationProgramming Features PERFORMANCE & SPECIFICATIONS
PERFORMANCE & SPECIFICATIONS Essentials Processor Intel Pentium Instruction Set 32-bit Performance Number of Cores 1 Processor Base Frequency 1.8 GHz Memory Data Storage 1 GB System Memory Installed 2
More informationCoroMill Plura MILLING. When precision counts! Multi-edge version For super finishing. Spherical version For accessibility
076-079 0-11-15 15.40 Sidan 76 When precision counts! Multi-edge version For super finishing CoroGrip power chuck For precision Spherical version For accessibility 76 076-079 00-10-05 11.28 Sidan 77 Benchmarks
More informationBULLDOG CUTTING TOOLS PROUDLY MADE IN THE USA END MILLING
BULLDOG CUTTING TOOLS END MILLING 126 Jackson St. Red Bud, IL 62278 Toll Free Phone: 1 (844) 441-5624 Fax: (618) 282-2831 sales@bulldogcut.com PROUDLY MADE IN THE USA SAFETY PRECAUTIONS Cutting tools may
More informationCentury Star Turning CNC System. Programming Guide
Century Star Turning CNC System Programming Guide V3.5 April, 2015 Wuhan Huazhong Numerical Control Co., Ltd 2015 Wuhan Huazhong Numerical Control Co., Ltd Preface Preface Organization of documentation
More informationIndex. E Expanded Metal Raised Flattened Grating... 93
Index A Aluminum Angle... 0 Channel... 07 Flat... 0 Hexagon... 0 Pipe... 0 Plate... 99 Round... 0 Sheet... 9 Square... 0 Tread Plate (Floor/Diamond Plate)... 00 Tube... 09 Angle Aluminum... 0 Bar Size...
More informationSplit Frame Clamshells and Accessories
Split Frame Clamshells and Accessories Sever and Machine Pipes From.625" to 86" (15.9 mm to 2184.4 mm) Rigid And Easy To Handle - Aluminum Body Gives Highest Strength-To- Weight Ratio And Our Exclusive
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr MARSHAFT I MANUAL SHAFT MEASURING UNITS V02-May 2009 MarShaft MAN Data Sheets 1 MarShaft MAN Shaft Measuring Unit Advantages at first sight A measuring instrument for multiple measuring
More informationEXPERIENCE THE POWER. THE NEW BobCAD-CAM V31. We have upgraded the entire customer experience to be more intuitive, modern and efficient.
01 EXPERIENCE THE POWER V31 Whether you re a leading manufacturer or just starting out, BobCAD-CAM has the features, training & support you need to machine better parts FASTER and EASIER, for LESS. THE
More informationSpecifications/price list CMA CNC controlled gantry drilling machines type RAPID-DRILL GRD CNC and GRD 60Z CNCZ
Specifications/price list CMA CNC controlled gantry drilling machines type RAPID-DRILL GRD 25-42 CNC and GRD 60Z CNCZ This newly concepted drilling machine is designed for the fully automatic execution
More informationAiretool Condenser Expanders Selection Guide G-900 Series Heat Exchanger and Condenser Tube Expanders. Airetool Heat Exchanger Condenser Expanders
Airetool Heat Exchanger Condenser Expanders Step Rolling Step rolling is required when expanding tubes in thick tube sheets. Typically the first expansion is made at the innermost location, away from the
More informationNEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
More informationBLACK & GALVANIZED SCH 40 STEEL NIPPLES
BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe
More informationModular Boring Systems
A modular toolholder system for boring, milling, drilling and tapping. 29 Modular Boring Systems A rigid high precision system conceived and manufactured with the most advanced design and production facilities,
More informationScandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2012-11 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationAUGUST - OCTOBER 2017
AUGUST - OCTOBER 07 DIGITAL INDICATOR Digital indicator with ABS, Max./Min., TOLERANCE functions and more. With flat back + lug back. Measuring range: 0-,7 mm : Ø diameter: 56 mm Shank Ø: 8 mm 540 0000
More informationPIG REPLACEMENT PARTS
PIG REPLACEMENT PARTS C - Scraper 2-14 Pg. 7-2 C - Scraper 16-48 Pg. 7-3 C - Sealer 3-14 Pg. 7-4 C - Sealer 16-48 Pg. 7-5 C - Guide 3-14 Pg. 7-6 C - Guide 16-48 Pg. 7-7 JC - Jetted 2-14 Pg. 7-8 JC - Jetted
More informationMach4 CNC Controller Mill Programming Guide Version 1.0
Mach4 CNC Controller Mill Programming Guide Version 1.0 1 Copyright 2014 Newfangled Solutions, Artsoft USA, All Rights Reserved The following are registered trademarks of Microsoft Corporation: Microsoft,
More informationSPINDLE TOOLING AND QUICKCHANGE TOOLPOSTS
SPIN TOOING N QUIHNG TOOPOSTS IN 8 IN 8 Manufactured with hrome Manganese steel arburized with depth of case 0,7 mm Hardened and ground Surface hardness R 8± MORS TPR Form kcesoria Form kcesoria MT a b
More informationYOUR DRILLING EXPERT EXPLORATION & GRADE CONTROL. wwww.halcorocktools.com
YOUR DRILLING EXPERT EXPLORATION & GRADE CONTROL wwww.halcorocktools.com OUR COMMITMENT TO YOU At Rock Tools we pride ourselves on exemplary levels of customer service, support and training to reflect
More informationBalanced by Design, Through tool holder coolant capability Flange through coolant Form B/AD Available
ER Collet Chucks FIG-1 Form A FIG-2 Form B Balanced by Design, Through tool holder coolant capability Flange through coolant Form B/AD Available Order Example CV50ER16400 Order Example CV50BER16250 Dynamically
More informationMach4 CNC Controller Mill Programming Guide Version 1.1 Build 3775
Mach4 CNC Controller Mill Programming Guide Version 1.1 Build 3775 Copyright 2014 Newfangled Solutions, Artsoft USA, All Rights Reserved The following are registered trademarks of Microsoft Corporation:
More information2016 INNOVATIONS CATALOG
INNOVATIONS CATALOG 2016 One versatile grooving and cut-off system Coolant channel on rake and pocket First system on the market with active coolant distribution, providing coolant directly to the minor
More informationContents EPB Tooling Systems
Contents EPB Tooling Systems Catalogue presentation.............................................. 2-3 Product overview Monobloc and Graflex holders...................... 4-6 Combimaster holders.............................
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationTurning Hardinge GS 51MS Turning Center
Turning Hardinge GS 51MS Turning Center Quotation to: ABMNameAlpha Quotation Number: SOHDocumentOrderInvoice Contact: Contact Name Address: ShipToAddressLine1 ShipToAddressLine2 ShipToAddressLine3 ShipToAddressLine4
More informationMASTERCAM DYNAMIC MILLING TUTORIAL. June 2018
MASTERCAM DYNAMIC MILLING TUTORIAL June 2018 MASTERCAM DYNAMIC MILLING TUTORIAL June 2018 2018 CNC Software, Inc. All rights reserved. Software: Mastercam 2019 Terms of Use Use of this document is subject
More informationFixed Headstock Type CNC Automatic Lathe
Fixed Headstock Type CNC Automatic Lathe MSY Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA42MSY is able to handle complex machining, with short cycle times
More informationPOWER TOOL ACCESSORIES
Professional SDS Plus Hammer Drills grade high performance SDS plus hammer drill bit range using the latest precision machining and carbide tip technology for increased penetration rates and more efficient
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More information102 Precision Measurement
102 Precision Measurement 4KU90 4KU86 4KU87 Outside Micrometers Quickly and easily adjusts to zero Features microfine graduations on satin chrome finish and carbide-tipped measuring faces. Ratchet stop
More informationPrecision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346
Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
More informationGrooving Tools. BGV toolholder. Designed for both Axial mounting (0 ) and Radial mounting (90 ).
Tools Tools BGV toolholder BGV toolholder is a flexible modular tooling system designed for ceramic grooving inserts with V-bottoms. This system provides the user with excellent index repeatability and
More informationNSA. Customer: Mega Alu Power Test. New Solution Announcement CLICK HERE FOR THE VIDEO
Customer: Mega Alu Power Test CLICK HERE FOR THE VIDEO customer MEVO Precision Technology Mevo Precision Technology specializes in producing fine mechanical components and assembling complete products
More informationMULTIMAR I UNIVERSAL MEASURING INSTRUMENTS
- + MULTIMAR I UNIVERSAL MEASURING INSTRUMENTS DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS. The latest information on MULTIMAR products can be found on our website: www.mahr.de/en/home,
More informationMultiSwiss 6x16. Machine options. We keep you turning
MultiSwiss 6x16 Machine options We keep you turning Machine options Description Integrated X-Y numerical axes, position 3 Travel ± 15 mm. TB-DECO program is supplied (Not compatible with xxxx) 273-0053
More informationMODULAR BORING PROGRAM
online version Click on the highlighted texts for a quick access to the pages MOUAR BORING PROGRAM MOUAR BORING SYSTEM & COUPING SYSTEM... MOUAR BORING SYSTEM AVANTAGES... PROUCT OVERVIEW... MOUAR BORING
More information1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4
For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.
More informationFine Pitch. Cresting (Full Profile): UN maximum TPI of 32 ISO minimum pitch of 1,5mm
Application Guide..........................................................E2 E3 Top Notch................................................................E4 E39 T.....................................................................E40
More informationTW-10, SC-200/250, WT-150/250, WTW-150, WTS-150, SUPER NTJ, NTJX, NTM3 DRIVEN AND STATIC TOOLING CATALOG
Nakamura-Tome TW-10, SC-200/250, WT-150/250, WTW-150, WTS-150, SUPER NTJ, NTJX, NTM3 DRIVEN AND STATIC TOOLING CATALOG 10139 BERGIN RD. HOWELL, MI 48843 PHONE : 877 91 TOOLS ( 810 632 4446 ) FAX: 877 92
More information