powrgrip Switzerland Made in Swiss Precision Tools
|
|
|
- Johnathan Kelley
- 5 years ago
- Views:
Transcription
1 powrgrip Made in Switzerland Swiss Precision Tools
2 PG Safe, Precise, Cost-effective The REGO-FIX powrgrip is an extremely precise, safe, and cost-effective Press-Fit system, perfect for your high-speed, high-performance cutting applications. The system delivers superior runout using a toolholder, versatile collet, and a compact benchtop hydraulic clamping unit. Standard The collet s built in set screw provides precise presetting, repeatable to less than (10μ). Its slightly tapered shape, combined with the 9-ton tabletop clamping unit, deliver the highest clamping force on the market without dangerous heat or hazardous EMF radiation. With a simple 10-second clamping cycle and a tool that s ready for immediate use without the need for cool-down, you can complete tool changes in less than 30 seconds CAT Holders Standard Form B [inch] CAT 40 / PG 10 x 3.5" H FWR 285 CAT 40 / PG 10 x 6" H FWR 285 CAT 40 / PG 15 x 3.15" H FWR 285 CAT 40 / PG 15 x 4" H FWR 285 CAT 40 / PG 15 x 6" H FWR 325/285 CAT 40 / PG 25 x 3.15" H FWR 405 CAT 40 / PG 25 x 4" H FWR 405 CAT 40 / PG 25 x 6" H FWR 405/405 CAT 40 / PG 32 x 4.3" H FWR 505 CAT 40 / PG 32 x 6" H FWR 505/505 CAT 50 / PG 25 x 4" H FWR 505 CAT 50 / PG 25 x 6" H FWR 505/405 CAT 50 / PG 32 x 4.3" H FWR 505 CAT 50 / PG 32 x 6" H FWR 505/505 For long reach holders see our line of Xtended ength (X) Holders. Form B TC Holders (IN 69871) Standard Form B TC 30 / PG 10 x 060* TC 30 / PG 10 x 073 H FWR 285 TC 30 / PG 15 x 060* TC 30 / PG 15 x 080 H FWR 285 TC 30 / PG 25 x 080* TC 40 / PG 10 x 080 H FWR 285 TC 40 / PG 10 x 120 H FWR 285 TC 40 / PG 10 x 160 H FWR 325 TC 40 / PG 15 x 072* TC 40 / PG 15 x 080 H FWR 285 TC 40 / PG 15 x 120 H FWR 325 TC 40 / PG 15 x 160 H FWR 325/285 TC 40 / PG 25 x 072* TC 40 / PG 25 x 080 H FWR 405 TC 40 / PG 25 x 120 H FWR 405 TC 40 / PG 25 x 160 H FWR 405/405 TC 40 / PG 32 x 080* TC 50 / PG 25 x 081* TC 50 / PG 25 x 100 H FWR 505 TC 50 / PG 25 x 160 H FWR 505/405 TC 50 / PG 32 x 080* *Not for use with balancing rings.
3 BT Holders Standard Form B BT 30 / PG 10 x 062* BT 30 / PG 10 x 080 H FWR 285 BT 30 / PG 10 x 120 H FWR 285 BT 30 / PG 10 x 160 H FWR 285 BT 30 / PG 15 x 070 H FWR 285 BT 30 / PG 15 x 070 H** FWR 285 BT 30 / PG 15 x 120 H FWR 285 BT 30 / PG 25 x 080 H FWR 405 BT 30 / PG 25 x 080 H** FWR 405 BT 30 / PG 25 x 160 H FWR 405/405 BT 40 / PG 10 x 080 H FWR 285 BT 40 / PG 10 x 120 H FWR 325 BT 40 / PG 10 x 160 H FWR 325 BT 40 / PG 15 x 080 H FWR 285 BT 40 / PG 15 x 120 H FWR 325 BT 40 / PG 15 x 160 H FWR 325/285 BT 40 / PG 25 x 080 H FWR 405 BT 40 / PG 25 x 120 H FWR 405 BT 40 / PG 25 x 160 H FWR 405/405 BT 40 / PG 32 x 086* BT 50 / PG 10 x 120 H FWR 405 BT 50 / PG 10 x 160 H FWR 405 BT 50 / PG 15 x 120 H FWR 325 BT 50 / PG 15 x 160 H FWR 325 BT 50 / PG 25 x 100* BT 50 / PG 25 x 120 H FWR 505 BT 50 / PG 25 x 160 H FWR 505/405 BT 50 / PG 25 x 200 H FWR 505/405 BT 50 / PG 32 x 100* Extensions Tool Precise preset repeatability for both HSS and carbide tools Collet Slightly tapered shape maximizes clamping force Holder Superior runout and vibration dampening in a variety of taper styles 1 h6 1 rawing CY 10 / PG 10 x CY 20 / PG 10 x CY 20 / PG 10 x CY 20 / PG 10 x CY 20 / PG 15 x CY 25 / PG 25 x CY 25 / PG 25 X CY 25 / PG 25 X
4 PG HSK - Form A HSK-A 32 / PG 15 x 075* HSK-A 40 / PG 15 x 080 H FWR 285 HSK-A 40 / PG 25 x 100 H FWR 405 HSK-A 50 / PG 10 x 080 H FWR 285 HSK-A 50 / PG 15 x 080 H FWR 285 HSK-A 50 / PG 25 x 100 H FWR 405 HSK-A 63 / PG 10 x 080 H FWR 325 HSK-A 63 / PG 10 x 120 H FWR 325 HSK-A 63 / PG 10 x 160 H FWR 325 HSK-A 63 / PG 10 x 200 H FWR 325 HSK-A 63 / PG 15 x 080 H FWR 325 HSK-A 63 / PG 15 x 120 H FWR 325 HSK-A 63 / PG 15 x 160 H FWR 325/285 HSK-A 63 / PG 25 x 100 H FWR 405 HSK-A 63 / PG 25 x 120 H FWR 405 HSK-A 63 / PG 25 x 160 H FWR 405/405 HSK-A 63 / PG 32 x 100* HSK-A 63 / PG 32 x 120 H FWR 505 HSK-A 80 / PG 15 x 085 H FWR 325 HSK-A 80 / PG 25 x 100 H FWR 505 HSK-A 80 / PG 32 x 105 H FWR 505 HSK-A 100 / PG 10 x 085 H FWR 405 HSK-A 100 / PG 10 x 160 H FWR 405 HSK-A 100 / PG 15 x 085 H FWR 405 HSK-A 100 / PG 15 x 160 H FWR 405/285 HSK-A 100 / PG 25 x 100 H FWR 505 HSK-A 100 / PG 25 x 160 H FWR 505/405 HSK-A 100 / PG 25 x 200 H FWR 505/405 HSK-A 100 / PG 32 x 106 H FWR 505 * Not for use with balancing rings HSK - Form E & F HSK-E 25 / PG 10 x 055* HSK-E 32 / PG 10 x 060* HSK-E 32 / PG 10 x 080 H FWR 225 HSK-E 32 / PG 15 x 075* HSK-E 40 / PG 10 x 062* HSK-E 40 / PG 10 x 080 H FWR 225 HSK-E 40 / PG 10 x 120 H FWR 225 HSK-E 40 / PG 10 x 160 H FWR 285 HSK-E 40 / PG 15 x 080 H FWR 285 HSK-E 40 / PG 15 x 120 H FWR 285 HSK-E 40 / PG 25 x 090* HSK-E 40 / PG 25 x 100 H FWR 405 HSK-E 50 / PG 10 x 080 H FWR 285 HSK-E 50 / PG 10 x 120 H FWR 285 HSK-E 50 / PG 10 x 160 H FWR 285 HSK-E 50 / PG 15 x 080 H FWR 285 HSK-E 50 / PG 15 x 120 H FWR 285 HSK-E 50 / PG 25 x 100 H FWR 405 HSK-F 63 / PG 10 x 080 H FWR 325 HSK-F 63 / PG 15 x 080 H FWR 325 HSK-F 63 / PG 25 x 100 H FWR 405 HSK-F 63 / PG 32 x 100* HSK-F 80 Call For Availability *Not for use with balancing rings.
5 CAPTO Holders C3 / PG 10 x 055* C3 / PG 15 x 067* C4 / PG 10 x 060* C4 / PG 10 x 080 H FWR 225 C4 / PG 15 x 062* C4 / PG 15 x 080 H FWR 285 C5 / PG 10 x 060* C5 / PG 10 x 080 H FWR 285 C5 / PG 10 x 120 H FWR 285 C5 / PG 15 x 065* C5 / PG 15 x 080 H FWR 285 C5 / PG 15 x 120 H FWR 325 C5 / PG 25 x 080* C5 / PG 25 x 100 H FWR 405 C6 / PG 10 x 080 H FWR 325 C6 / PG 10 x 120 H FWR 325 C6 / PG 10 x 160 H FWR 325 C6 / PG 15 x 080 H FWR 325 C6 / PG 15 x 120 H FWR 325 C6 / PG 15 x 160 H FWR 325 C6 / PG 25 x 085* C6 / PG 25 x 100 H FWR 405 C6 / PG 25 x 120 H FWR 405 C6 / PG 25 x 160 H FWR 405 C6 / PG 32 x 090* C8 / PG 25 x 092* C8 / PG 32 x 090* *Not for use with balancing rings. ISO 20 d mm mm mm capacity [gmm] Set FWR Set FWR Set FWR Set FWR Set FWR Supplied: 1 Set with 2 Hi-Q TS 0.9 Nm Torque screwdriver TORX 8 for balancing rings ISO 20 / PG 10 x 058* * Supplied with integral Pull Stud - for use with powrgrip tool holding system
6 PG powrgrip Collets powrgrip PG 10 Collets ia. ia. PG PG 10CF / / / powrgrip PG 15 Collets ia. ia. PG 15 PG 15CF / / / / / PG Collets do not have a clamping range. Nominal diameter only. Requires h6 tolerance shanks powrgrip PG 25 & PG 32 Collets ia. ia. PG 25 PG 25CF / / PG 32 PG 32CF / / / / / / / / / /
7 powrgrip Micro-bore Collets ia ia PG ia ia PG / Automatic Machine Part # escription PGU 9000 A V machine APG PG 10 clamping insert APG PG 15 clamping insert APG PG 25 clamping insert APG PG 32 clamping insert Compact Machine Part # escription Single PG Series Complete Compact Sets (Fixed dies non-interchangeable) PG 10 Set PG 10 Complete Compact Set* PG 15 Set PG 15 Complete Compact Set* PG 25 Set PG 25 Complete Compact Set* Compact Set with Interchangeable Inserts for the different PG series PGC powrgrip Compact hydraulic clamping unit APC Insert for PGC 2510 for PG 25 toolholders APC Insert for PGC 2510 for PG 15 toolholders APC Insert for PGC 2510 for PG 10 toolholders Preset Adapters Part # escription VEW PG 10 Presetter VEW PG 15 Presetter VEW PG 25 Presetter VEW PG 32 Presetter
8 powrgrip - Features & Benefits PG Clamping operation in less than 10 seconds when using the PGU automatic machine. Clamps all types of toolshanks and materials in h6 tolerance from Ø " 1.0" ( mm) T.I.R. of < " (3 μm) Precise length adjustment repeatability <0.0004" (10 μm) High vibration dampening due to the interupted surfaces between the toolholder to collet and the collet to tool shank. eveloped for optimal productivity such as High Speed Cutting (HSC ) and High Performance Cutting (HPC) Highest transferable torque and lowest T.I.R., even after 20,000 tool changes For 5 years or 20,000 cycles, REGO-FIX guarantees the T.I.R. of the powrgrip holder and collet will not exceed and that the impregnated surface treatment will not erode. Transferable Torque of the powrgrip System REGO-FIX Tool Corp Moller Rd. Indianapolis, IN Phone: (317) Fax: (317) Toll Free: (800) Info@rego-fix.com CO /2010
CAPTO. Switzerland. Made in. Swiss Precision Tools
CAPTO Made in Switzerland Swiss Precision Tools REGO-FIX CAPTO Toolholders As a Certified Sandvik CAPTO manufacturer, REGO-FIX uses new state of the art measuring and grinding systems to create the most
Features Benefits. powrgrip Collets. Swiss Quality Made in Switzerland to ISO9001/ISO14001.
Swiss Tools Features Benefits 1 Swiss Quality Made in Switzerland to ISO9001/ISO14001. Marking With type and size (reduced collet selection error). Product Traceability Lot number marked on collets, therefore
micrun Switzerland TIR of 3 µm ( ) at 3 Diameters assembled Made in Swiss Precision Tools
micrun TIR of 3 µm (0.0001 ) at 3 Diameters assemble Mae in Switzerlan Swiss Swiss MR What is micrun The micrun system is a new prouct esigne for high spee an high accuracy machining applications. A specially
MACHINE TOOL ACCESSORIES
MACHINE TOOL ACCESSORIES ISO TOOLHOLDERS FOR CNC ROUTERS 33-70 Note: Measure the A dimension with the collet in the nut. Dimensions in Millimeters COLLET PULL STUD DESCRIPTION D A F N NUT WRENCH PROVIDED
SHRINK FIT TOOLHOLDER TECHNOLOGY CV40 SHRINK FIT HOLDERS - INCH & METRIC 36 CV50 SHRINK FIT HOLDERS - INCH & METRIC 37-38
SHRINK FIT TOOLHOLDER TECHNOLOGY 34-35 CV4 SHRINK FIT HOLDERS - INCH & METRIC 36 CV5 SHRINK FIT HOLDERS - INCH & METRIC 37-38 BT4 SHRINK FIT HOLDERS - INCH & METRIC 39 HSK63A SHRINK FIT HOLDERS - INCH
Technical. Scan this QR Code Featured Video
Scan this QR Code Featured Video 223 Lyndex-Nikken Product Warranty Standard Product Lyndex-Nikken Inc., the seller, warrants to the user, who purchases and uses (the User ) the Standard Product, as hereinafter
Features Benefits. Collets. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and size (reduced collet selection errors).
Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 9001/ISO 14001. 1 1 Marking Type and size (reduced collet selection errors). Traceability Lot number marking on all products
High Precision Clamping System
Collet Locking- System Made in Switzerland total system runout 3 µm superior clamping force micrun High Precision Clamping System micrun High Precision Clamping System total system runout 3 µm at 3 xd
4-component Dynamometer (RCD)
Force 4-component Dynamometer (RCD) Type 9171A... Rotating for measuring cutting forces in heavy machining The rotating 4-component dynamometer (RCD) Type 9171A... permits the measurement of the forces
Toolholders & Accessories
Toolholders & Accessories Contact us for a fast quote. USA Headquarters 364 email: sales@napgladu.com (800) 457-7468 Canada, Montreal (800) 363-9117 Canada, Toronto (888) 251-2236 Table of Contents Toolholders
ERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE
ERos TOOLHOLDING SYSTEM SIMPLICITY ULTRA PRECISION EXTREME PERFORMANCE HISTORY 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the manufacturing of Sulky Hubs. 1973 Parlec begins
COLLETS. DESCRIPTION DIN 6388 COLLETS Form A For plain straight shank tools QUICK CHANGE TAPPING. ADAPTERS Bilz type. Positive drive adapters
COETS ESCRIPTION Page ESCRIPTION Page IN 88 COETS Form A For plain straight shank tools 5 QUICK CHANGE TAPPING AAPTERS Bilz type Positive drive adapters 2 IN 88 COETS Form E For threaded straight shank
CNC HIGH PRECISION TOOL HOLDER EXTENSIONS
d 1 1 CNC HIGH PRECISION TOO HOER EXTENSIONS With Spring Collet Heat Treated Alloy Steel ER collet chucks used for different projects and applications, save money by not purchasing extra-long tools! Choose
MarPreset. Increase Your Efficiency.
+ Ma rpre s e t. To o l Preset t er s 3 MarPreset. Tool Presetters Ma rpre set Tool Presetters 19-2 Ma rpre set 1500 19-3 Ma rpre set 1800 19-4 Ma rpre set 1800 Shrink S et 19-5 Ma rpre set 2500 19-6 Ma
Capto-Compatible* Turn/Mill Toolholders
Capto-Compatible* Turn/Mill Toolholders The C4, C5, C6, holders you need, Techniks Certified. ER Collet Chucks End Mill Holders ShrinkFIT Face Mill Arbors Turning Tools & Inserts SlimFIT Holders Built
Capto-Compatible* Turn/Mill Toolholders
Capto-Compatible* Turn/Mill Toolholders The C4, C5, C6, holders you need, Techniks Certified. ER Collet Chucks End Mill Holders ShrinkFIT Face Mill Arbors Turning Tools & Inserts SlimFIT Holders Built
Modular Boring Systems
A modular toolholder system for boring, milling, drilling and tapping. 29 Modular Boring Systems A rigid high precision system conceived and manufactured with the most advanced design and production facilities,
Alberti System LIVE TOOLS
LIVE TOOLS 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com S MARTC HANGE New from, a complete range of live tools with interchangeable
Contents EPB Tooling Systems
Contents EPB Tooling Systems Catalogue presentation.............................................. 2-3 Product overview Monobloc and Graflex holders...................... 4-6 Combimaster holders.............................
For MEGA MICRO CHUCK Available in 0.1mm diameter increments to suit all the cutting tool shank sizes with maximum accuracy. Despite their compact size
MICRO COLLET NEW BABY COLLET NBC ENDMILL COLLET COLLET EJECTOR MEGA E COLLET STRAIGHT COLLET for MILLING CHUCK PERFECT SEAL (MPS / BPS / EPS) PULL STUD BOLT POINT MASTER PRO PMP POINT MASTER PMC POINT
7 Collet chucks. 7.3 Cylindrical collet chucks 7.13 Rego-Fix nuts 7.19 Rego-Fix Sealing disks 7.23 Rego-fix equipment 7.35 Quick change tool systems
.3 Cylindrical collet chucks.13 Rego-Fix nuts.19 Rego-Fix Sealing disks.23 Rego-fix equipment.35 Quick change tool systems Notes Tél.: +41 32 436 10 50 Fax: +41 32 436 10 55 info@wibemo.ch www.wibemo.ch
TOOL DYNAMIC BALANCING MACHINES.
TOOL DYNAMIC BALANCING MACHINES www.haimer-usa.com CONTENT HAIMER Tool Dynamic Balancing Technology Page Why should I buy a Balancing Machine? 4 Case Studies 6 Why balance grinding wheels 8 How to balance
THERMOGRIP SHRINK FIT TECHNOLOGY
THERMOGRIP SHRIK FIT TECHOLOGY I O VAT I O I P E R F O R M A C E I Q U A L I T Y The Foundation. For over 90 years, Bilz has been a leading supplier of tool holders, tapping technology and shrink fit systems.
Presetting, measuring and shrinking machines. redomatic & tribos
Presetting, measuring and shrinking machines redomatic & tribos The universal presetting, measuring and heat-shrink machine»redomatic«zoller»redomatic«has been especially designed for heat-shrinking of
MASTER CATALOG KCPM45.
MASTER CATALOG KCPM45 KSEM Modular Drills KCPM45 Your New Grade for Tough Jobs in Low-Carbon Steel KCPM45 combines a very tough, fine-grain carbide substrate with an advanced multilayer TiAlN coating.
Product information PI 54 en Machining unit xxx Slide unit xxx
Product information PI 54 en Machining unit 0.5.030.xxx Slide unit 0.2.200.xxx 2016-03-01 Table of Contents Table of Contents Machining Unit Brief Description...4 Technical Data...6 Dimensions...7 Precision...8
Side block mm Combination element to extend or to combine two stoppers
Clamping tools 45 5D workpiece stopper Side block 10-18 mm Combination element to extend or to combine two stoppers Application: One of the various application of the workpiece stopper is as a versatile
Series - AOTP. Contactless measurement does not damage cutting edges. Suitable for expensive cutting tools such as diamond and CBN.
Contactless Optical Tool Presetter Series - AOTP User friendly! NT s original Easy To Operate optical tool presetter. Contactless measurement does not damage cutting edges. Suitable for expensive cutting
ACS LP Series Mechanical-Bearing Rotary Stage
ACS LP Series Rotary Stages ACS LP Series Mechanical-Bearing Rotary Stage Integral pneumatic ER collet chuck Clear aperture for product feed-through Low inertia shaft for maximum acceleration Integral
THERMOGRIP SHRINK FIT TECHNOLOGY
we hold our promise THERMOGRIP SHRIK FIT TECHOLOGY IOVATIO I PERFORMACE I QUALITY we hold our promise The Foundation. For over 90 years, Bilz has been a leading supplier of tool holders, tapping technology
MICROSET. Tool Presetters.
MICROSET Tool Presetters www.haimer.com CONTENTS HAIMER YOUR SYSTEM PROVIDER AROUND THE MACHINE TOOL 03 PRECISION AND PRODUCTIVITY IN PRODUCTION 04 70 Sek./seconds TOOL PRESETTERS YOUR BENEFITS 05 UNO
Expansible Tapping Holder
Expansible Tapping Holder Floating and expansion design will reducte the differential of motor rotary speed and feeding speed so will extend the life of tap. Use ER High Spring Collet, you don t need to
MICROSET. Tool Presetters.
MICROSET Tool Presetters www.haimer.com CONTENTS 70 S HAIMER YOUR SYSTEM PROVIDER AROUND THE MACHINE TOOL 03 PRECISION AND PRODUCTIVITY IN PRODUCTION 04 TOOL PRESETTERS YOUR BENEFITS 05 UNO SERIES EQUIPMENT
CNC TOOL HOLDERS GAUGING PRODUCTS
we hol our promise CNC TOOL HOLERS GUGING PROUCTS INNOVTION I PERFORMNCE I QULITY www.bilzusa.com BILZ FIT FOR FOR THE THE FUTURE FUTURE TPPING (MQL) MINIMUM QUNTITY LUBRICNT INUCTION SHRINK-FIT SYSTEM
grindsmart 529xs english
grindsmart 529xs english smart grinding unlimited grinding solutions The GrindSmart 529XS is a 5-axis precision tool grinder for the manufacturing of standard and high performance cutting tools covering
P R E S E T T E R C A T A L O G
PRESETTER CATALOG E238 PRESETTERS (LYRA, PULSAR & ARA MODELS) MECHANICAL FEATURES Axes Movement: Manual Rapid Traverse for Continuous Micro- Fine Adjustment by Wormscrew Measuring Range: X-Axis - 140 mm
ETS / ETA Collets and Nuts
ETS / ETA Collets and Nuts CH 6805 MEZZOVICO Zona Industriale 3 Tel. ++41 (0)91 946 40 70 Fax ++41 (0)91 946 40 47 E-MAIL info@tecnopinz.com WEBSITE www.tecnopinz.com k 1.1.1 Catalogue_ETS_ETA_2018 (V.01.01.2018)
ACS Series. Mechanical-Bearing Rotary Stage. Integral pneumatic ER collet chuck or 3-jaw gripper. Clear aperture for product feed-through
ACS Series Mechanical-Bearing Rotary Stage Integral pneumatic ER collet chuck or 3-jaw gripper Clear aperture for product feed-through Normally-closed or -open gripper options Low-inertia shaft for maximum
OIL & GAS TOOLS AND SOLUTIONS SECO THREADING CASING/TUBING COUPLINGS
OIL & GAS TOOLS AND SOLUTIONS SECO THREADING CASING/TUBING COUPLINGS THREADING OIL & GAS OIL & GAS TOOLS AND SOLUTIONS SQUARE 1 1/4 SHANK CHASER HOLDERS The two-pin system ensures extremely precise insert
Burs Toolholders Toolholders. CAT40 ER20 Collet Chucks, Straight Shank. Collet Extension and Parts. CAT40 ER25 Collet Chucks, Straight Shank
Table of Contents Burs 386 394 408 Cylindrical End Cut SB, Uncoated CAT40 ER20 Collet Chucks, Straight Shank Collet Extension and Parts CAT40 Jacobs Taper Holders and Parts 387 395 409 Cylindrical Ball
Split Frame Clamshells and Accessories
Split Frame Clamshells and Accessories Sever and Machine Pipes From.625" to 86" (15.9 mm to 2184.4 mm) Rigid And Easy To Handle - Aluminum Body Gives Highest Strength-To- Weight Ratio And Our Exclusive
PREMIUM FU HSC. mill. Safety Integrated. Optimum Premium 5-axis universal machining center with SIEMENS SINUMERIK 840D sl
mill FU 5-600 HSC Optimum Premium 5-axis universal machining center with SIEMENS SINUMERIK 840D sl Heavy type High productivity Precision linear guidings in all axes High rapid traverse rate of 36 m/min
Spiral Mill-Thread. Advantages of Spiral Mill-Thread Tools
Spiral Mill-Thread Advantages of Spiral Mill-Thread Tools The spiral designed tools enable a smooth cutting operation at a high feed rate and reduced machining time. The tools suit a wide range of applications,
CONVERSION SYSTEMS AND ADAPTERS TO HSK-T
132 133 CONVERSION SYSTEMS AND ADAPTERS TO HSK-T Introduction Designation key 134 Conversion systems, adapters and blanks KS flange adapters 136 137 Extensions and reducers 152 Blanks 153 HSK-T conversion
Tool Holding For improved thread quality - CNC Rigid Tapping TOOL HOLDING
Tool Holding For improved thread quality - CNC Rigid Tapping TOOL HOLDING SynchroFlex Tapping Attachment with unique Double Flexure Unlike other synchronous tap drivers that use soft plastic components
BTC. Presetting Units. Member of the LEITZ Group
BTC Presetting Units Member of the LEITZ Group www.bilz.de BTC I STARTER, TABLE VERSION One Handed Control Ergonomic operation concept for easy positioning of the measuring carriage by the tool cutting
Up to 103 mm Ø. KomTronic. Micro-adjustable drilling head M040. Micro-adjustable drilling head with direct measuring system and digital display
Up to 03 mm Ø Micro-adjustable drilling head M040 Micro-adjustable drilling head with direct measuring system and digital display KomTronic Sturdy Accurate Easy to use With the M040 micro-adjustable drilling
MarTest. Test Indicators
- - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)
MarTest. Test Indicators
- - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm
INTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
TOOL MASTER Octa2. Tool presetting The professional and compact solution for your manufacturing
TOOL MASTER Octa2 PWB tool presetters stand for maximum productivity with ultimate user-friendliness. The tooling quality and timely detection of damaged tools boost productivity and reduce the number
10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
Best of Accessories. April June Bosch Customer Service Content to be adapted locally. Dealer contact details
Best of Accessories April June 2014 Bosch Customer Service 095 81 Promotions This number connects you to the Bosch Customer Service Team. It is there to answer your questions about technical matters and
V-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
Micrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
Why use machine adapted clamping units?
Why use machine adapted clamping units? Better performance Faster tool changes Use Coromant Capto tools for turning, milling and drilling Ready-equipped to channel high pressure coolant to the latest in
PARSETTER TMM. Tool Presetting, Measuring and Inspection Systems
PARSETTER TMM Tool Presetting, Measuring and Inspection Systems World-Class Products Advanced Engineering Precision Manufacturing Global Service and Support BY ANY MEASURE Measurably Better Table of Contents
venturion The premium presetting and measuring machine for tools of all kinds
The premium presetting and measuring machine for tools of all kinds 02 03 Opening Up New Perspectives Those who respond to progress can succeed. Those who help shape it stay ahead. This idea is constantly
ROVI EXPANDING COLLETS
ROVI EXPANDING COLLETS For 5C, 16C and 3J Spindles and Fixtures Diameters of.065" through 6" 800-423-5145 Expanding Collet Accessories Rovi Reworking Tools Plus Mini Collet Turning Ring Reworking Sleeve
YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE.
- and Touch Probes YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. Since 1936 Mahr is one of the leading global producers of test indicators, we have achieved this with the continuous
HEIGHT GAUGE Hi_Cal & Hi_Gage ONE
HEIGHT GAUGE & Hi_Gage ONE Specially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.
Clamping Systems. PClamp. PClamp N. PClamp E. Gewährleistung. Inhalt. RotoClamp. DiskClamp. LinClamp. PClamp
Gewährleistung Inhalt N dvantages 1 Pneumatic clamping with high forces General information 2 Optimum safety clamping pneumatic failure locks the system The performance of hydraulic clamps will be achieved
Bore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
CALIBRATION. Sylvac Dial Gauge Calibrator
Sylvac Dial Gauge Calibrator The Sylvac stand is custom designed for calibrating all types of dial gauges, lever indicators and transducers. It utilises a 25mm / 1" travel Sylvac probe linked to a digital
HELICHECK PRO / PRO LONG HELICHECK PLUS / PLUS LONG
Creating Tool Performance A member of the UNITED GRINDING Group HELICHECK PRO / PRO LONG HELICHECK PLUS / PLUS LONG for the macro and micro ranges Key parameters Fully automated HELICHECK PRO/PRO LONG
GF Machining Solutions. Mikron HPM 1150U HPM 1350U
Mikron HPM 115U HPM 135U Swiss design and quality 2 Mikron HPM 115U / 135U Contents Applications 4 Highlights 6 Accessibility 8 The basic machine 1 A hightech spindle 11 Tool magazine 14 Ergonomics 15
PNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
TELECENTRIC LENSES INNOVATION STARTS HERE... Global Design & Support Rapid Prototyping Volume Manufacturing & Pricing
Edmund Optics BROCHURE TELECENTRIC LENSES INNOVATION STARTS HERE... Global Design & Support Rapid Prototyping Volume Manufacturing & Pricing Contact us for a Stock or Custom Quote Today! UK: +44 (0) 1904
Torque Motor Rotary indexing tables TO. Technology that inspires
Torque Motor Rotary indexing tables TO Technology that inspires Technology that inspires Weiss have opened a new chapter in the history of rotary indexing tables with the new Torque Series (TO). The introduction
TELECENTRIC LENSES INNOVATION STARTS HERE... Global Design & Support Rapid Prototyping Volume Manufacturing & Pricing
Edmund Optics BROCHURE TELECENTRIC LENSES INNOVATION STARTS HERE... Global Design & Support Rapid Prototyping Volume Manufacturing & Pricing Contact us for a Stock or Custom Quote Today! USA: +1-856-547-3488
Balanced by Design, Through tool holder coolant capability Flange through coolant Form B/AD Available
ER Collet Chucks FIG-1 Form A FIG-2 Form B Balanced by Design, Through tool holder coolant capability Flange through coolant Form B/AD Available Order Example CV50ER16400 Order Example CV50BER16250 Dynamically
LABCONCEPT Nano. introduction
LABCONCEPT Nano 85 TRIMOS HORIZONTAL MEASURING INSTRUMENTS LABCONCEPT Nano introduction No compromise on accuracy The Labconcept Nano is a new reference in the field of dimensional metrology. It integrates
AQDEXOH10D, 15D, 20D, 25D, 30D, 40D, PLT AQMD
New USA Stock Items AQUA DRI EX CARBIDE DRI SERIES Aqua EX 2D, D Aqua EX Oil Hole D, D, D Aqua EX Deep Hole D, 1D, 20D, 2D, 0D, 0D Aqua EX Oil Hole Pilot Aqua EX Oil Hole Three Flute D, D Aqua Micro Metric,
SYSTEM 6 handles. SYSTEM 6 handles.
SYSTEM 6 handles. SYSTEM 6 handles. 284 Ergonomic multi-component handle with roll-off protection. With 6 mm hex retainer. Enables adjustable blade lengths from 42-114 mm. Versatile for general applications
Workholding. Workholding CHUCKS CENTRES 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS STEEL CENTRES 60º PLAINBACK FITTING CARBIDE CENTRES 60º
CENTRES CHUCKS STEEL CENTRES 60º 3-JAW SELF CENTERING MONO-BLOCK JAW CHUCKS CARBIDE CENTRES 60º Taper Stock Code MT1 014-101 0.25kg MT2 014-102 0.25kg MT3 014-103 0.5kg MT4 014-104 1kg MT5 014-105 2.5kg
FIXED FOCAL LENGTH LENSES
Edmund Optics BROCHURE FIXED FOCAL LENGTH LENSES INNOVATION STARTS HERE... Global Design & Support Rapid Prototyping Volume Manufacturing & Pricing Contact us for a Stock or Custom Quote Today! USA: +1-856-547-3488
Tool holder for rigid tapping Accessories MGT Set Screw MGT6SS MGT12SS CATALOG No. MGT20SS Synchro Adjuster Compensates
Tool holer for rigi tapping icense CATAOG No. Compensates for synchronization errors uring rigi tapping Improves threa quality an tool life by reucing thrust loas cause by synchronization errors up to
For Gear, Spline & Rack Manufacturing
For Gear, Spline & Rack Manufacturing INC Advanced Technologies for Gear, Spline and Rack Manufacturing Standard s for Spline Applications Gear Milling System Advantages Super Fast Machining At least 50%
MAXIMIZE YOUR PRODUCTION CAPACITY WITH A MEASURING INSTRUMENT
SPERONI & INNOTOOL MEASURING INSTRUMENTS 2018-2019 MAXIMIZE YOUR PRODUCTION CAPACITY WITH A MEASURING INSTRUMENT 2 COMPANY HISTORIES 4 MEASURING INSTRUMENT OVERVIEW 5 BASIC MEASURING INSTRUMENTS 6-7 DIASET
SIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
X.mill 700 HS. Premium CNC Machining Center.
CUSTOMIZED X.mill 700 HS Premium CNC Machining Center cutter spindle with direct drive cutter spindle speed 15.000 rpm (24.000 and 30.000 rpm optional) preloaded ball screws with inside cooling rapid feed
Spiral Mill-Thread. Advantages of Spiral Mill-Thread Tools
Spiral Mill-Thread Contents: Contents: ISO UN Whitworth BSPT NPT NPTF Spiral Finishing Toolholders Special Tools Advantages of Spiral Mill-Thread Tools The spiral designed tools enable a smooth cutting
Complete 3D measurement solution
Complete 3D measurement solution Complete access The S neox Five Axis 3D optical profiler combines a high-accuracy rotational module with the advanced inspection and analysis capabilities of the S neox
Features & Specifications Guide for MultiCam Digital Express
Features & Specifications Guide for MultiCam Digital Express Digital Finishing......Made Affordable! The MultiCam Digital Express is loaded with features normally found on more expensive X/Y/Z cutting
Заказ инструмента: 8 (343) Start-up tool kits for new machines
Start-up tool kits for new machines Table of content Introduction... 4 Turning centres Kit contents... 5 External turning shank... 6 External turning shank with high precision coolant... 7 Internal boring
Presetting and Measuring Machine. hyperion 250
Presetting and Measuring Machine hyperion 250 hyperion 250 The universal presetting and measuring machine for use on One for all. This pithy phrase sums up the advantages of the ZOLLER hyperion 250 presetting
dia. grit type R type S eblend surface conditioning disc
QUICK CHANGE Discs blend Mini E Quick Change Flap Discs The Mini E flap discs are manufactured using the best zirconia abrasive on a heavy cloth backing. Mini E discs features a quick change system using
ROC T15 Technical specification
Atlas Copco Surface drill rigs ROC T15 Technical specification When small holes are big business is the smallest hydraulic drill rig in our range. It is perfect for small construction jobs, self-drilling
DYNAMIC, FLEXIBLE, PRECISE
TO FREELY PROGRAMMABLE ROTARY TABLES TO TORQUE ROTARY TABLE Precise and fast mechanical integration through pin holes, safe electrical commissioning through perfect hardware. TO TORQUE ROTARY TABLE: DYNAMIC,
compact smile The mini-must-have for professional tool presetting and measuring
compact smile The mini-must-have for professional tool presetting and measuring 02 03 smilecompact Original ZOLLER Absolute precision, simple operation, fast results. That is what ZOLLER presetting and
KD-NL. Specialized Machine. Quick Change Stub Tapper. Finger collet assembly P Tap Adapter P. 458
KD-NL Quick Change Stub Tapper Designed for use on KD spindle. Spindle Feed: All kinds of feed styles.for spindle feed other than pitch feed, use KD-NL in a condition where the tension feature always works
RADIO TRANSMISSION TOUCH PROBING SYSTEM
RADIO TOUCH PROBING SYSTEM Description of the system The Mida WRS radio transmission touch probing system is ideal for use on medium and large scale, 5-axis machines. It features a working frequency o.4
STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
Touch Probes for Machine Tools
Touch Probes for Machine Tools October 2010 Touch Probe Systems for Machine Tools Touch probes from HEIDENHAIN were conceived for use on machine tools in particular milling machines and machining centers.
Start-up tool kits for new machines
Start-up tool kits for new machines Get your machine tooled up! A new machine is a major investment, so a short payback time is always welcomed. To make it easy to get started with your new machine, we
1735 N. 28th Avenue Suite 1 Phoenix, AZ Local: Outside AZ: Fax:
1735 N. 28th Avenue Suite 1 Phoenix, AZ 85009 Local: 602-269-1775 Outside AZ: 877-845-7940 Fax: 602-269-0542 CONTENTS SOLID CARBIDE THREAD MILLS Thread Mill Identification System Carbide Grades Internal
LaserLyte-Flex Red & Green Alignment System
LaserLyte-Flex Red & Green Alignment System LaserLyte-Flex The LaserLyte-Flex is an entry-level laser alignment system. It uses interchangeable optics and a semiconductor laser diode to project a highly
RAW MATERIALS PREMIUM CARBIDE GRADES AND TABLES RESOURCE VALUE. (888)
RAW MATERIALS PREMIUM CARBIDE GRADES AND TABLES The raw material that is used to manufacture your tool is just as important as the design of the tool itself. By using inferior materials, the tool life
MODULAR BORING PROGRAM
online version Click on the highlighted texts for a quick access to the pages MOUAR BORING PROGRAM MOUAR BORING SYSTEM & COUPING SYSTEM... MOUAR BORING SYSTEM AVANTAGES... PROUCT OVERVIEW... MOUAR BORING