Featured Components for Lab Bench Test

Baluns and 90 Degree Hybrid Couplers. Directional Couplers. Attenuators, Resistors and Terminations. Combiners/Dividers

Baluns and 90 Degree Hybrid Couplers Directional Couplers Combiners/Dividers Attenuators, Resistors and Terminations RF and Microwave Passive Components for Military, Medical, Industrial and Wireless Applications

(877) ( )

Tuckwila, WA Long Beach, CA Tempe, AZ Franklin, WI St. Augustine, FL Dongguan City, China Carlisle Interconnect Technologies, 21. All trademarks, registered trademarks, service marks and tradenames are

SP3T SP4T SP5T SP6T. (GHz) 4~ ~ Model Number Selection

SHX801-0X SMA Series SP3T SP4T SP5T SP6T Coaxial Switch have 28 kind of productions, include Failsafe or Latching, with CPU Drive or without CPU Drive, with Terminations or without Terminations SP3T SP4T

SMP / SMP-COM / SMP-MAX series R222

3 SMP / SMP-COM / SMP-MAX series R222 SMP-MAX INTRODUCTION BOARD TO BOARD SOLUTIONS The Best Systems Radiall s engineers work with your engineers allowing us to develop the best competitively priced misalignment

ELECTRICAL SPECIFICATIONS**

REV A Hybrid Couplers 3 db, 90 Description The 1P503AS Pico Xinger is a low profile, high performance 3dB hybrid coupler in an easy to use manufacturing friendly surface mount package. It is designed for

SPDT up to 50 GHz Pc Board - SMA - SMA mm - QMA - SMC - SMB - mini SMB - DIN 1.6/5.6 R Actuator Voltage: 2: 12 Vdc 3: 28 Vdc

SPDT up to GHz Pc Board - SMA - SMA2.9-2.4mm - QMA - SMC - SMB - mini SMB - DIN 1.6/5.6 Radiall s RAMSES SPDT switches offer excellent reliability, high performance and operating frequencies from DC to

Labs. Introduction. Application Notes

Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover

Miniature Matrix: MMA Series Controlled with USB or Ethernet

PART NUMBER DESCRIPTION The MMA Series is an ideal solution that consists of SPDT, electromechanical coaxial switches designed to switch a microwave signal from a common input to either of two outputs.

GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3

` Model 1P603S Hybrid Coupler 3 db, 90 Features: 2.3 2.7 GHz. W-LAN and MMDS Low Loss High Isolation 90 o Quadrature Surface Mountable Tape And Reel Available in Lead-Free (as illustrated) or Tin- Lead

Labs. Introduction. Application Notes

Introduction Application Notes Florida RF has provided an extensive collection of Application Notes in this section to help designers select and specify cable assemblies. These Application Notes cover

11525A 11524A

8 Typical Configuration 11900A 11901A 11904A 8059A 1250-1159 1250-1748 85058-60007 11900C 11901C 11901D 11904C 11904D 8059C 1250-1462 85058-60009 1190A 1250-166 1250-174 11525A 11524A 11852B 11852B Option

Miniature Matrix: MMB Series Controlled with USB or Ethernet

PART NUMBER DESCRIPTION The MMB Series is an ideal solution that consists of Transfer, electromechanical coaxial switches designed to switch a microwave signals in a DPDT confi gration. The characteristic

SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions

Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,

Our Most Important Connection is with You. SECTION 3. Board-to-Board: MMBX / SMP-MAX R223 / R222M

SECTION 3 Board-to-Board: MMBX / R223 / R222M Contents MMBX Introduction... 3-4 Interface... 3-5 Characteristics... 3-6 Plugs... 3-7 PCB receptacles... 3-7 to 3-8 Adapters... 3-9 Demo board... 3-10 Panel

Series PC 3.5 precision subminiature connectors

Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable

MAX2009/MAX2010 Evaluation Kits

19-2972; Rev 0; 9/03 MAX2009/MAX2010 Evaluation Kits General Description The MAX2009/MAX2010 evaluation kits (EV kits) simplify the evaluation of the MAX2009 and MAX2010. These kits are fully assembled

Hybrid Couplers 3dB, 90º Type PC2025A2100AT00

GENERAL DESCRIPTION The PC2025A2100AT00 is a RoHS compliant low profile wideband 3dB hybrid coupler which can support mobile applications, including PCS and DCS applications. The power coupler series of

Features. High RF Shielding. Easy Opening/Closing of lid. EMI filters on all Data and DC lines. Easily customizable to meet various test needs

TC-5915A Shield Box Features High RF Shielding Easy Opening/Closing of lid EMI s on all Data and DC lines Easily customizable to meet various test needs Shock absorber on lid Specifications Mechanical

ATEC (2832) Models 8757A, 85027A/B/C, 85020A/B

Established 1981 Advanced Test NETWORK Equipment ANALYZERS Rentals 8757/8756 System Accessories wwwatecorpcom 800-404-ATEC (2832) Models 8757A, 85027A/B/C, 85020A/B UP]] HP 8757A Specifications Amplitude

Fixed Attenuators. Product description. Features and benefits. Standard attenuators, low power, 50 and 75

Fixed Attenuators Product description HUBER+SUHNER Attenuators are used in a wide variety of RF and microwave applications and excellently meet the requirements of: Design and Egineering Test and Measurement

+14dBm to +20dBm LO Buffers/Splitters with ±1dB Variation

-24; Rev 2; 3/4 +dbm to +dbm LO Buffers/Splitters General Description The MAX9987 and MAX9988 LO buffers/splitters each integrate a passive two-way power splitter with highisolation input and output buffer

N Series Connectors Medium sized connector for high-voltage applications Suited for critical applications and environments Performance to 11 GHz (commercial) and 18 GHz (hi frequency) Intermateable with

ELECTRICAL SPECIFICATIONS**

ico Xinger 1dB Directional Coupler Description The 161 ico Xinger is a low profile, miniature 1dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications. The

ELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3

Pico Xinger 20dB Directional Coupler Description The 1P620 Pico Xinger is a low profile, miniature 20dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications.

Features. High RF Shielding. Easy Opening/Closing of lid. EMI filters on all Data and DC lines. Easily customizable to meet various test needs

TC-5915A Shield Box Features High RF Shielding Easy Opening/Closing of lid EMI filters on all Data and DC lines Easily customizable to meet various test needs Shock absorber on lid Specifications Mechanical

Features. General Description. Ordering Information. Component List

General Description The MAX2117 evaluation kit (EV kit) simplifies the testing and evaluation of the device direct-conversion tuner. The evaluation kit is fully assembled and tested at the factory. Standard

R Actuator Terminals: 0: Solder pins 5: D-Sub connector

Terminated and non Terminated up to 40 GHz SMA - SMA2.9 - QMA - DIN 1.6 / 5.6 COAXIAL RADIALL R573 & R574 multithrow coaxial switches are offered in many configurations (over 40,000 possible possible combinations)

40-785B Microwave Multiplexer Module

40-785B Microwave Multiplexer Module Single or Dual 6 Channel Panel Mounted Multiplexer Up To 3 Remote Multiplexers From Single Slot Version 18GHz, 26.5GHz 40GHz & 50GHz Versions 50Ω Terminated and Unterminated

Limiters Detectors Switches, Switch Matrices Attenuators Phase Shifters Directional Couplers Power Dividers Integrated Assemblies.

Limiters Detectors Switches, Switch Matrices Attenuators Phase Shifters Directional Couplers Power Dividers Integrated Assemblies RF / Microwave Components & Subsystems 2011 Table of Contents Limiters

Evaluates: MAX2120. MAX2120 Evaluation Kit. General Description. Features. Ordering Information. Component List

General Description The MAX2120 evaluation kit (EV kit) simplifies the testing and evaluation of the IC direct-conversion tuner. The evaluation kit is fully assembled and tested at the factory. Standard

Series CCR-59S/CR-59S Multi-Throw DC-26.5 GHz Latching Coaxial Switch

PART NUMBER CCR-59S CR-59S DESCRIPTION Commercial Latching Multi-throw, DC-26.5GHz Elite Latching Multi-throw, DC-26.5GHz The CCR-59S/CR-59S is a broadband, multi-throw, electromechanical coaxial switch

SMA Series - Crimp Plug and Jack

Plug Features: SMA connectors are semi-precision, subminiature devices that provide repeatable electrical performance. These devices offer broadband performance with low reflection. These properties, along

pickeringtest.com B Microwave Multiplexer Module

0-78B Microwave Multiplexer Module Single or Dual Channel Panel Mounted Multiplexer Up To 3 Remote Multiplexers From Single Slot Version 18GHz, 2.GHz and 0GHz Versions 0 Ohm Terminated and Unterminated

Agilent RF Network Analyzers PNA Series

Agilent RF Network Analyzers PNA Series Configuration Guide E8356A E8357A E8358A 300 khz to 3 GHz 300 khz to 6 GHz 300 khz to 9 GHz System Configuration Summary This summary lists the main components required

AT-31011, AT Low Current, High Performance NPN Silicon Bipolar Transistor. Data Sheet. Description

AT-3111, AT-3133 Low Current, High Performance NPN Silicon Bipolar Transistor Data Sheet Description Avago s AT-3111 and AT-3133 are high performance NPN bipolar transistors that have been optimized for

decoupled connectors RF Coax Connectors Product Facts

Decoupled Connectors Product Facts Built-in chip capacitors filter high-frequency noise to panel ground PC board mounting with vertical and standard or low-profile right-angle configurations Cable mount

Agilent PNA Series Microwave Network Analyzers

Agilent PNA Series Microwave Network Analyzers Configuration Guide PNA-L N5230A PNA-L N5230A PNA E8362B PNA E8363B PNA E8364B PNA E8361A PNA N5250A 300 khz to 6, 13.5, or 20 GHz 10 MHz to 20, 40, or 50

Maxim Integrated Products 1

19-3093; Rev 0; 12/03 MAX3942 Evaluation Kit General Description The MAX3942 evaluation kit (EV kit) is an assembled demonstration board that provides electrical evaluation of the MAX3942 10.7Gbps modulator

Keysight Technologies PNA Series Microwave Network Analyzers

Keysight Technologies PNA Series Microwave Network Analyzers Configuration Guide PNA-L N5230A PNA-L N5230A PNA-X N5242A PNA E8362B PNA E8363B PNA E8364B PNA E8361A PNA N5250A 300 khz to 6, 13.5, or 20

spinner Measurement & Calibration equipment for network analyzers

spinner Measurement & Calibration equipment for network analyzers Edition B 2011 High Frequency Performance Worldwide www.spinner-group.com SPINNER test & calibration equipment for best measurement results

Agilent ENA-L RF Network Analyzers

Agilent ENA-L RF Network Analyzers Configuration Guide E5061A E5062A 300 khz to 1.5 GHz 300 khz to 3 GHz This configuration guide describes standard configurations, options, accessories and peripherals

RAMSES SERIES R 57. SPnT Terminated & non Terminated up to 40 GHz. Our Most Important Connection is with You.

SPnT Terminated & non Terminated up to 40 GHz SMA SMA 2.9 QMA - DIN 1.6 / 5.6 Radiall's R573 & R574 multithrow coaxial switches are offered in many configurations (over 40,000 possible combinations) including

Solutions Spotlight Fall 2009

Solutions Spotlight Fall 2009 Skyworks Solutions Skyworks Solutions, Inc. is an innovator of high reliability analog and mixed signal semiconductors. Leveraging core technologies, Skyworks offers diverse

Mini-Circuits RF Switch Control Program for USB RF Switch

Xtra Long Life 100 million cycles USB RF-SPDT Switch DC to 18GHz The Big Deal Capable of 100 million cycles Wide frequency (DC to 18GHz) High power, 10W 2 SPDT electromechanical, absorptive, RF switches

Miniature Matrix: MMC Series Controlled with USB or Ethernet

PART NUMBER DESCRIPTION The MMC Series is an ideal solution that consists of multi-throw, electromechanical coaxial switches designed to switch a microwave signal from a common input to any of 3, 4, 5,

SSMP Interconnect Series

SSMP Interconnect Series INTRODUCTION Carlisle Interconnect Technologies (CarlisleIT) designed the SSMP connector product line to further improve package density of RF/Microwave systems. The SSMP interface

Tx/Rx Globalstar Helix Antenna, P/N: 73G1625LL-A1-XS-1F1: Pictures, Outline Drawing, Specification, Part List, Part Drawing and Test Data

Tx/Rx Globalstar Helix Antenna, P/N: 73G1625LL-A1-XS-1F1: Pictures, Outline Drawing, Specification, Part List, Part Drawing and Test Data 4/19/24 Sean Huynh Antcom's Proprietary 1 Tx/Rx Globalstar Helix

Agilent ENA RF Network Analyzer

Agilent ENA RF Network Analyzer Configuration Guide E5071C E5091A 9 khz to 4.5 GHz 100 khz to 4.5 GHz (with bias tees) 9 khz to 8.5 GHz 100 khz to 8.5 GHz (with bias tees) Multiport test set This configuration

SUBMINIATURE SERIES R 591. SUBMINIATURE SPnT up to 40 GHz. Our Most Important Connection is with You. SMA SMA 2.9 QMA

PART Number Selection RF Connectors: 3: SMA up to 6 GHz 7: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz (6) E: QMA up to 6 GHz (5) Type: 0: Normally open 2: Latching, global reset 6: Latching, separated

Series 3400 lightning EMP protectors Quarter-wave stub technology

Series 3400 lightning EMP protectors Quarter-wave stub technology Description HUBER+SUHNER quarter-wave lightning EMP protectors offer the best lightning protection available in the market, as they form

*Note: Operation beyond this range is possible, but has not been characterized. PART. Maxim Integrated Products 1

19-8; Rev ; 2/ EVALUATION KIT AVAILABLE 8MHz to MHz Variable-Gain General Description The MAX6 general-purpose, high-performance variable-gain amplifier (VGA) is designed to operate in the 8MHz to MHz

SMA Connectors Series

SMA Connectors Series Content Page Description.. 2 Interface Dimensions.. 2 Interface Dimensions in mm/inches.. 2 Characteristics. 3 Cable Connectors 4 PCB Connectors 11 Panel Receptacles.. 13 Adapter

F1325 Operation at 450 MHz

F1325 Operation at 45 MHz July 28, 214 AT15 Non Automated Measurements Michael J. Virostko Principal Product Application Engineer 1 July 28, 214 Agenda Introduction Test Requirements Test Results 2 July

Agilent PNA Series Microwave Network Analyzers

Agilent PNA Series Microwave Network Analyzers Configuration Guide PNA-L N5230A PNA-L N5230A PNA-X N5242A PNA E8362B PNA E8363B PNA E8364B PNA E8361A PNA N5250A 300 khz to 6, 13.5, or 20 GHz 10 MHz to

Redundancy Switch Controller 1:1 RSCM1

Visit us at www.work-microwave.com Redundancy Switch Controller 1:1 The WORK Microwave redundancy switch 1:1 is used for 1:1 redundancy configurations for Upconverters, Downconverters, Modulator-Upconverters,

S-Band Redundant LNA Systems

S-Band Redundant LNA Systems LRS-1000 Series Introduction Redundant LNA systems minimize system downtime due to LNA failure by providing a spare LNA and an automatic means of switching to the spare upon

Product Datasheet Revision: April 2014

ALP8 8 GHz Product Datasheet Revision: April 1 Applications W-Band Imaging Sensors Radar X =.mm Y =.8mm Product Features RF frequency: 8 GHz Broadband Operation Linear gain: 9 db, typical Noise Figure:

SECTION 1 IMP / UMP R107

1 SECTION 1 / UMP R107 Contents Introduction... 1-4 to 1-6 Characteristics...1-7 Board to board connectors...1-8 Receptacle packaging...1-9 Assembly instructions... 1-9 to 1-10 UMP Characteristics...1-11

S Fully Assembled and Tested S On-Board 25MHz Crystal S Switches for Selecting Modes of Operation S SMA Connectors and AC-Coupled Clock I/Os

19-5269; Rev 1; 5/10 E V A L U A T I O N K I T A V A I L A B L E MAX3637 Evaluation Kit General Description The MAX3637 evaluation kit (EV kit) is a fully assembled and tested demonstration board that

MMA043AA Datasheet 0.5 GHz 12 GHz GaAs phemt MMIC Wideband Low-Noise Amplifier

MMA043AA Datasheet 0.5 GHz 12 GHz GaAs phemt MMIC Wideband Low-Noise Amplifier Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:

Evaluates: MAX2851. MAX2851 Evaluation Kit. General Description. Features. Quick Start. Connections and Setup. Test Equipment Required

MAX2851 Evaluation Kit Evaluates: MAX2851 General Description The MAX2851 evaluation kit (EV kit) simplifies testing of the MAX2851 receive and transmit performance in 802.11a applications operating in

D C. Directional Coupler. Directional Coupler. Product Code System. Product Code System

Product Code System Product Code System D C 1. Input Connector Type 3. 1. Start Frequency 4. I/O Port Type 7. Type Input Connector Type (db) Start Frequency I/O Port Type Type 16 SMA50 17 SMA75 28 BNC50

The UFC-6000 can measure the frequency of a signal from 1 to 6000 MHz. Mini-Circuits

Wide Frequency Range RF Frequency Counter 1-6000 MHz The Big Deal USB HID device compatible with 32/64 bit operating systems Wide Frequency Range Uses internal or External reference Supplied with proprietary

16 way 19 1½U enclosure with rear cable management tray NPGZM-16-NJ. ½U high front mounting cable management tray

Features: Connects 75 ohm coaxial and 120 ohm twisted pair cabling systems Supports all G.703 data rates up to 34 Mbps Snap-in modules are easy to install and maintain Field expandable and upgradable Various

Microwave. Products. a Knowles Precision Devices brand

Microwave Products a Knowles Precision Devices brand DLI Microwave DLI s Microwave Catalog Products integrate two core competencies that have been honed for over 40 years; ceramic expertise and thin film

AT-41511, AT General Purpose, Low Noise NPN Silicon Bipolar Transistors. Data Sheet. Description. Features. Pin Connections and Package Marking

AT-4111, AT-4133 General Purpose, Low Noise NPN Silicon Bipolar Transistors Data Sheet Description Avago s AT-4111 and AT-4133 are general purpose NPN bipolar transistors that offer excellent high frequency

GRF2505. Linear PA Driver/Ultra-low Noise Amplifier; GHz. Features. Applications. Preliminary. Product Description. Functional Block Diagram

Linear PA Driver/Ultra-low Noise Amplifier; 4.0-6.0 GHz Package: 6-Pin DFN Product Description Features Broadband: 4.0 GHz to 6.0 GHz 0.80 db Noise Figure at 5.5 GHz 13.2 db gain, +33 dbm OIP3 and +20.5

Access PIN-TIA Receivers for 155 Mb/s and 622 Mb/s EDR 51xx Series

COMMUNICATIONS COMPONENTS Access PIN- Receivers for 55 Mb/s and 6 Mb/s EDR 5xx Series Applications Single mode 55 Mb/s (EDR 5x) and 6 Mb/s (EDR 55x) ATM receivers Campus network backbone - Add/drop multiplexers

CGH40006S. 6 W, RF Power GaN HEMT, Plastic APPLICATIONS FEATURES

Rev 3.1 April 2017 CGH40006S 6 W, RF Power GaN HEMT, Plastic Cree s CGH40006S is an unmatched, gallium nitride (GaN) high electron mobility transistor (HEMT). The CGH40006S, operating from a 28 volt rail,

GRF4002. Broadband LNA/Linear Driver GHz. Features. Applications. Preliminary. Product Description

Broadband LNA/Linear Driver 0.1-3.8 GHz Package: 1.5 x 1.5 mm DFN-6 Product Description Features 0.1 GHz to 3.8 GHz (Single Match) NF: 0.75 db @ 2.5 GHz Gain: 15.0 db @ 2.5 GHz OIP3: +37.0 dbm @ 2.5 GHz

UM User manual for the BGU MHz LNA evaluation board. Document information

User manual for the BGU7003 868MHz LNA evaluation board Rev.1.0 06 December 2011 User manual Document information Info Content Keywords 868MHz LNA, BGU7003. Application Board ordering info: Abstract This

Features wideband, 10 to 4200 MHz low insertion loss, 0.6 db typ. feed through terminal per DC port

Coaxial Bias-Tee 50Ω Wideband 10 to 4200 MHz Maximum Ratings Operating Temperature -55 C to 100 C Storage Temperature -55 C to 100 C RF Power Voltage at DC port Input Current DC resistance from DC to RF&DC

TTR500 Series Vector Network Analyzers Demonstration Guide

xx ZZZ TTR500 Series Vector Network Analyzers Demonstration Guide *P071349301* 071-3493-01 xx ZZZ TTR500 Series Vector Network Analyzers Demonstration Guide Register now! Click the following link to protect

MMA044AA Datasheet 6 GHz 18 GHz GaAs phemt MMIC Wideband Low-Noise Amplifier

MMA044AA Datasheet 6 GHz 18 GHz GaAs phemt MMIC Wideband Low-Noise Amplifier Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA:

CLK1, CLKIN, CLKOUT, OUTA, OUTB

9-82; Rev 2; 5/ Evaluation Kit General Description The evaluation kit (EV kit) is a fully assembled and tested circuit board that contains all the components necessary for evaluating the. The is a dual,0-bit,

G IP3=38. P1dB= Single. Units

Product Description SG0 SG0 is a high performance InGaP HBT amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable current over temperature

SEMS-4066-DPDT-SMA DATA SHEET

Transfer Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Indicators, TTL, Self Cut Off, SMA The SEMS-4066-DPDT-SMA is a Transfer Electromechanical Relay Switch that operates

Awareness Brochure. New Standards For Precise Component, Semiconductor and Material Measurements. Expanded LCR Meter Performance to 1 GHz!

HP Precision LCR Meter Family HP 4284A 20Hz 1 MHz LCR Meter HP 4285A 75 khz 30 MHz LCR Meter HP 4286A 1 MHz 1 GHz RF LCR Meter HP 42841A 20Adc Bias Current Source HP 42851A Precision Q Adapter New Standards

RF switch network. RFB 2000, RFC 2010 or 2020

RFB 000, RFC 010 or 00 The can be configured to switch RF signals in a wide range of automatic test systems. Various switch configurations are available, connecting one input to either two or six outputs.

= 25 C) of Demonstration Amplifier. Parameter 500 MHz 1.0 GHz 1.5 GHz 2.0 GHz 2.5 GHz Units. Small Signal Gain

Rev 5.0 May 2015 CGH40090PP 90 W, RF Power GaN HEMT Cree s CGH40090PP is an unmatched, gallium nitride (GaN) high electron mobility transistor (HEMT). The CGH40090PP, operating from a 28 volt rail, offers

7011-C, 7012-C, 7013-C, 7015-C, 7018-C, 7021, MTC-2 Mass Terminated Assembly Twisted pair (45) 96-pin female 96-pin female 2 6.

TERMINATIONS LENGTH MODEL DESCRIPTION TYPE FROM TO m ft USE WITH: 236-ILC-3 Safety Interlock Shielded twisted pair 3-pin round 3-pin round 3 10 236, 237, 238, 8007, 8008 237-ALG-2 Low Noise Input Triax

Agilent. E5071C Network Analyzer 9 khz to 4.5/6.5/8.5 GHz 100 khz to 4.5/6.5/8.5 GHz (with bias tees) 300 khz to 14/20 GHz (with bias tees)

Agilent E5071C Network Analyzer 9 khz to 4.5/6.5/8.5 GHz 100 khz to 4.5/6.5/8.5 GHz (with bias tees) 300 khz to 14/20 GHz (with bias tees) E5092A Configurable Multiport Test Set Configuration Guide This

GRF2013. Released. Broadband Linear Gain Block 0.05 to 8.0 GHz. Product Description. Features. Applications

Product Description is a broadband gain block with low noise figure and high linearity designed for small cell, wireless infrastructure and other high performance applications. It exhibits outstanding

SEMS-4052-SPDT-SMA DATA SHEET

SPDT Latching Electro-Mechanical Relay Switch From DC to 18 GHz, 100 Watts with Indicators, Self Cut Off, SMA The is an SPDT Electromechanical Relay Switch that operates over a wide frequency band from

E5092A Configurable Multiport Test Set

Keysight Technologies E5080A Network Analyzer 9 khz to 4.5/6.5/9 GHz E5092A Configurable Multiport Test Set Configuration Guide 02 Keysight 5080A Network Analyzer & E5092A Configurable Multiport Test Set

Models 1417 and 1437 User s Manual. High-Speed Photodetector Modules

Models 1417 and 1437 User s Manual High-Speed Photodetector Modules Handling Precautions The detector is sensitive to electrostatic discharges and could be permanently damaged if subjected even to small

GRF4002. Released. Broadband LNA/Linear Driver GHz. Product Description. Features. Applications

Product Description Features Reference: 5V/70mA/2.5 GHz EVB NF: 0.85 db Gain: 15.0 db OP1dB: 23.5 dbm OIP3: 36.5 dbm is a broadband low noise gain block designed for small cell, wireless infrastructure

GRF2051. Ultra-Low Noise Amplifier; Tuning Range: GHz. Features. Applications. Preliminary. Product Description. Functional Block Diagram Ven

Ultra-Low Noise Amplifier; Tuning Range: 0.7 3.8 GHz Package: 2.0 x 2.0 mm QFN-12 Product Description Features Reference Condition: 1.9 GHz, 5.0 V and 70 ma Gain: 19.2 db Eval Board NF: 0.37 db De-embedded

Connectors. High Performance to 65 GHz. Applications. PDF Volume 1. Click Here for Table of Contents Click Here for Specifications

SMP/SMPM Applications DELTA ELECTRONICS MANUFACTURING CORP. Connectors High Performance to 65 GHz PDF Volume 1 Click Here for Table of Contents Click Here for Specifications (978) 927-1060 FAX (978) 922-6430

PLATINUM SERIES R PART NUMBER SELECTION. High performance SPDT up to 40 GHz. Our Most Important Connection is with You. SMA - SMA 2.

PART NUMBER SELECTION Frequency Range: 3: SMA up to 6 GHz 4: SMA up to 20 GHz F: SMA up to 26.5 GHz 8: SMA 2.9 up to 40 GHz Type: 3: Latching (1) 4: Latching + I.C. (1) 5: Latching + S.C.O. (1) 6: Latching

Control Devices Surface Mount Input-Limiting Diode Element

GC4212-6LP Datasheet Control Devices Surface Mount Input-Limiting Diode Element Released December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...

GRF2012. Released. Broadband Linear Gain Block 0.05 to 3.8 GHz. Product Description. Features. Applications

Product Description Features Reference: 5V/90mA/900 MHz Gain: 14.8 db OIP3: 40.0 dbm OP1dB: 23.0 dbm NF: 2.7 db Reference: 8V/100mA/900 MHz is a broadband gain block with low noise figure and industry

FCI-XXXA Large Active Area 970nm Si Monitor Photodiodes

FCI-XXXA Large Active Area 970nm Si Monitor Photodiodes FCI-020A and FCI-040A with active area sizes of 0.5mm and 1.0mm, are parts of OSI Optoelectronics s large active area IR sensitive Silicon detectors

GC4701-6LP Datasheet RoHS-Compliant Control Devices DC 15 GHz Surface Mount Limiter PIN Diode

GC4701-6LP Datasheet RoHS-Compliant Control Devices DC 15 GHz Surface Mount Limiter PIN Diode Microsemi Corporate Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113

GRF2083. Preliminary. Ultra-LNA with Shutdown Tuning Range: 3.0 to 6.0 GHz. Product Description. Features. Applications

Product Description Features Reference: 5V/70 ma/3.6 GHz Gain: 17.8 db Eval Board NF: 0.65 db OP1dB: 19.5 dbm OIP3: 36.5 dbm High Isolation Shut Down State Flexible Bias Voltage is a broadband, linear,

RF SWITCH NETWORK RFB 6000

RF Switch network example with switches on the back Freely configurable main frame for up to 10 RF switches Optical remote control for system integration Touch panel for manual operation and system integration

VITA 67 Series. Ideal For Blind Mate Applications. Electrical, Mechanical & Environmental Specifications

VITA 67 Series Delta Electronics Manufacturing Corp. introduces 4 position (VITA 67.1) and 8 position (VITA 67.2) RF connector housings designed for 3U and 6U formats within the OpenVPX architecture. Ideal

SECTION 7 SMA/SMA-COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON. Visit for more information

SECTION 7 /COM/BMA R125/R124/R128 SIMPLIFICATION IS OUR INNOVATON Visit www.radiall.com for more information Contents BMA Introduction... 74 Characteristics... 75 Plugs... 76 Jacks... 77 to 78 Receptacles...78

Low Current, High Performance NPN Silicon Bipolar Transistor. Technical Data AT AT-32033

Low Current, High Performance NPN Silicon Bipolar Transistor Technical Data AT-311 AT-333 Features High Performance Bipolar Transistor Optimized for Low Current, Low Voltage Operation 9 MHz Performance:

Agilent. E5092A Configurable Multiport Test Set. Configuration Guide

Agilent E5071C Network Analyzer 9 khz to 4.5 GHz 100 khz to 4.5 GHz (with bias tees) 9 khz to 8.5 GHz 100 khz to 8.5 GHz (with bias tees) 300 khz to 20 GHz (with bias tees) E5092A Configurable Multiport