Thin-Film Directional Couplers
|
|
|
- Lynn Henry
- 5 years ago
- Views:
Transcription
1 42 High Directivity LGA Termination GENERAL DESCRIPTION ITF (Integrated Thin-Film) TECHNOLOGY The ITF High Directivity LGA Coupler is based on thin-film multilayer technology. The technology provides a miniature part with excellent high frequency performance and rugged construction for reliable automatic assembly. The ITF Coupler is offered in a variety of frequency bands compatible with various types of high frequency wireless systems. APPLICATIONS Mobile Communications Satellite TV Receivers GPS Vehicle Location Systems Wireless LAN s HOW TO ORDER Style Directional Coupler 42 Size 42 QUALITY SPECTION X Type Finished parts are 1% tested for electrical parameters and visual characteristics. Each production lot is evaluated on a sample basis for: Static Humidity: 85 C, 85% RH, 16 hours Endurance: 125 C, I R, 4 hours TERMATION Sn9Pb1 or Lead-Free Sn1 Nickel/Solder coating compatible with automatic soldering technologies: reflow, wave soldering, vapor phase and manual. ORIENTATION TAPE FEATURES Inherent Low Profile Self Alignment during Reflow Excellent Solderability Low Parasitics Better Heat Dissipation Operating/Storage Temp C to +85 C Power Rating W RF Cont **** Frequency (MHz) DIMENSIONS: (Bottom View) T L W T X Sub Type W N LGA Termination L = LGA Sn9, Pb1 **N = LGA Sn1 TERMALS (Top View).1 (.12) A 1.±.5 (.4±.2).58±.4 (.2±.2).5±.5 (.14±.2) B **RoHS compliant 5 OHM COUPLG Recommended Pad Layout Dimensions millimeters (inches) A B S L TR S.2±.5 (.8±.2).18±.5 (.7±.2).5±.5 (.2±.2) Packaging Code TR = Tape and Reel Not RoHS Compliant LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. mm (inches) 5 OHM 5 OHM.2 (.8).15 (.6).5 (.21) *The recommended distance to the PCB Ground Plane is.254mm (.1") 49
2 42 High Directivity LGA Termination 42 - TYPE SELECTION CHART vs. Frequency AxxxxAN 42AxxxxBN 42AxxxxCN 42AxxxxDN 42AxxxxEN [db] AxxxxFN Intermediate coupling factors are readily available. Please contact factory. 5
3 42 High Directivity LGA Termination Coupler 42AxxxxAN * 42A86AN A881AN A92AN A947AN E- 42A897AN A942AN PDC 42A1441AN A1747AN A1842AN A188AN A196AN PHP 42A197AN DECT 42A189AN Wireless LAN 42A2442AN A5AN A5AN A55AN A6AN , [db] AxxxxANTR Coupler 42AxxxxBN 42A86BN A881BN A92BN A947BN E- 42A897BN A942BN PDC 42A1441BN A1747BN A1842BN A188BN A196BN PHP 42A197BN DECT 42A189BN Wireless LAN 42A2442BN A5BN A5BN A55BN A6BN , [db] AxxxxBNTR 7.18" Coupler 42AxxxxCN 42A86CN A881CN A92CN A947CN E- 42A897CN A942CN PDC 42A1441CN A1747CN A1842CN A188CN A196CN PHP 42A197CN DECT 42A189CN Wireless LAN 42A2442CN A5CN A5CN A55CN A6CN , [db] AxxxxCNTR Important: Couplers can be used at any frequency within the indicated range. 51
4 42 High Directivity LGA Termination Coupler 42AxxxxDN * 42A86DN A881DN A92DN A947DN E- 42A897DN A942DN PDC 42A1441DN A1747DN A1842DN A188DN A196DN PHP 42A197DN DECT 42A189DN Wireless LAN 42A2442DN A5DN A5DN A55DN A6DN , [db] AxxxxDNTR Coupler 42AxxxxEN 42A86EN A881EN A92EN A947EN E- 42A897EN A942EN PDC 42A1441EN A1747EN A1842EN A188EN A196EN PHP 42A197EN DECT 42A189EN Wireless LAN 42A2442EN A5EN A5EN A55EN A6EN , [db] AxxxxENTR Coupler 42AxxxxFN 42A86FN A881FN A92FN A947FN E- 42A897FN A942FN PDC 42A1441FN A1747FN A1842FN A188FN A196FN PHP 42A197FN DECT 42A189FN Wireless LAN 42A2442FN A5FN A5FN A55FN A6FN , [db] AxxxxFNTR Important: Couplers can be used at any frequency within the indicated range. 52
5 42 / 6 High Directivity Couplers Test Jigs GENERAL DESCRIPTION These jigs are designed for testing the 42 and 6 High Directivity Couplers using a Vector Network Analyzer. They consist of a dielectric substrate, having 5Ω microstrips as conducting lines and a bottom ground plane located at a distance of.254mm (.1") from the microstrips. The substrate used is Neltec s NH98ST254C1BC. The connectors are SMA type (female), Johnson Components Inc. Product : Both a measurement jig and a calibration jig are provided. The calibration jig is designed for a full 2-port calibration, and consists of an open line, short line and through line. LOAD calibration can be done by a 5Ω SMA termination. MEASUREMENT PROCEDURE When measuring a component, it can be either soldered or pressed using a non-metallic stick until all four ports touch the appropriate pads. Set the VNA to the relevant frequency band. Connect the VNA using a 1dB attenuator on the jig terminal connected to port 2. Follow the VNA s instruction manual and use the calibration jig to perform a full 2-Port calibration in the required bandwidths. Place the coupler on the measurement jig as follows: Input (Coupler) Connector 1 (Jig) Termination (Coupler) Connector (Jig) Output (Coupler) Connector 2 (Jig) (Coupler) Connector 4 (Jig) To measure connect: Connector 1 (Jig) Port 1 (VNA) Connector (Jig) 5Ω Connector 2 (Jig) Port 2 (VNA) Connector 4 (Jig) 5Ω To measure and connect: Connector 1 (Jig) Port 1 (VNA) Connector (Jig) 5Ω Connector 2 (Jig) 5Ω Connector 4 (Jig) Port 2 (VNA) To measure connect: Connector 1 (Jig) 5Ω Connector (Jig) 5Ω Connector 2 (Jig) Port 1 (VNA) Connector 4 (Jig) Port 2 (VNA) Measurement Jig Calibration Jig Connector 4 Connector 1 Connector 2 Open Line Short Line to GND. OPEN HS TH Connector Johnson Load & Through Connector Load & Through 59
Thin-Film Directional Couplers
CP6 High Directivity LGA Termination GENERAL DESCRIPTION ITF (Integrated Thin-Film) TECHNOLOGY The ITF LGA Coupler is based on thin-film multilayer technology. The technology provides a miniature part
Thin-Film Low Pass Filter
LP63 Lead-Free LG Type GENERL DESCRIPTION The LP63 ITF (Integrated Thin Film) Lead-Free LG Low Pass Filter is based on thin-film multilayer technology. The technology provides a miniature part with excellent
Hybrid Couplers 3dB, 90º Type PC2025A2100AT00
GENERAL DESCRIPTION The PC2025A2100AT00 is a RoHS compliant low profile wideband 3dB hybrid coupler which can support mobile applications, including PCS and DCS applications. The power coupler series of
"High Frequency Ceramic Solutions"
Page 1 of 5 This filter is associated with Intel Reference Desing Platform: IRE220 General Specifications Part Number 5697CR45A0360 Operating Passband Freq. 5490-5850 MHz Top View Insertion loss (5490-5670MHz)
ELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3
![ELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3](/thumbs/89/100344529.jpg "ELECTRICAL SPECIFICATIONS** Frequency. Power Handling. Directivity. .064±.013 [1.64±0.33] Pin ±.004 [3.05±0.10] Pin 3")
Pico Xinger 20dB Directional Coupler Description The 1P620 Pico Xinger is a low profile, miniature 20dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications.
GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3
![GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3](/thumbs/81/84156060.jpg "GHz db Min db Max Max: Phase Balance. .053±.011 [1.35±0.27] Pin ±.004 [3.05±0.10] Pin 3")
` Model 1P603S Hybrid Coupler 3 db, 90 Features: 2.3 2.7 GHz. W-LAN and MMDS Low Loss High Isolation 90 o Quadrature Surface Mountable Tape And Reel Available in Lead-Free (as illustrated) or Tin- Lead
ELECTRICAL SPECIFICATIONS**
ico Xinger 1dB Directional Coupler Description The 161 ico Xinger is a low profile, miniature 1dB directional coupler in an easy to use surface mount package designed for MMDS and WLAN applications. The
ELECTRICAL SPECIFICATIONS**
REV A Hybrid Couplers 3 db, 90 Description The 1P503AS Pico Xinger is a low profile, high performance 3dB hybrid coupler in an easy to use manufacturing friendly surface mount package. It is designed for
Model XDL S Rev A
Delay Line DESCRIPTION The XDL15-3-030S can be used in amplifier linearization applications from 135 2700Mhz. Small form factor of XDL15-3-030S is ideal for cascading to obtain longer delay. The Xinger
MLVS 0402 Series Engineering Specification
MLVS 0402 Series 1. Scope This specification is applicable to Chip Metal Oxide Varistor in multilayer technology.the customer designed part number drawing take precedence over this specification. For RoHS
PSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
QPQ MHz Band 41 BAW Filter Product Overview Key Features Functional Block Diagram Applications Pin Configuration Pin No.
1 MHz Product Overview The is an ultrahigh performance Bulk Acoustic Wave (BAW) filter that provides 1 MHz bandwidth for uplink / downlink applications in Band 41. With low passband insertion loss and
PAGE 1/6 ISSUE SERIES Micro-SPDT PART NUMBER R516 X3X 10X R 516 _ 1 0 _
PAGE 1/6 ISSUE 13-08-18 SERIES Micro-SPDT PART NUMBER R516 X3X 10X R516 series: the RAMSES concept merges with the SLIM LINE technology, breaking up the frequency limits of SMT switches : - FULL SMT TECHNOLOGY
TransferJet RF Coupler Part No. SR4T014 lamiiant Product Specification
TransferJet RF Coupler lamiiant Product Specification 1. Features Coupler for TransferJet applications Short range coupling device for secure data transfer Point to point connectivity SMD mounting Small
SLVU WATT ULTRA LOW CAPACITANCE TVS ARRAY PIN CONFIGURATION
600 WATT ULTRA LOW CAPACITANCE TVS ARRAY Description The is a low voltage, low leakage current and ultra low capacitance TVS device designed for EOS and ESD protection of low voltage circuits commonly
Film Chip Capacitors. PPS DIELECTRIC CB Series GENERAL DESCRIPTION ADVANTAGES APPLICATIONS PERFORMANCE CHARACTERISTICS
APPLICATIONS General purpose function in low voltage applications: Filtering, coupling, decoupling Time-constant Oscillation timing circuit Typical applications would be: Automotive (navigation system...)
SFC ChipClamp ΤΜ Flip Chip TVS Diode with T-Filter PRELIMINARY Features
Description The SFC2282-50 is a low pass T-filter with integrated TVS diodes. It is designed to provide bidirectional filtering of EMI/RFI signals and electrostatic discharge (ESD) protection in portable
TQQ MHz LTE Band 3 Uplink BAW Filter
Applications LTE Band 3 Uplink Infrastructure Base Station General Purpose Wireless 6 Pin 3x3 mm leadless SMT Package Product Features Functional Block Diagram 75 MHz Bandwidth High Attenuation Low Loss
ACA-5036-A2-CC-S Specification
1. APPLICATION: WLAN, 802.11b/g, Bluetooth, etc ACA-5036-A2-CC-S Specification 2. Explanation of part number : AC A _ 5036 _ A2 _ CC _ S (1) (2) (3) (4) (5) (6) (7) (1) Product Type:Chip Antenna (2) Center
Vertical Launch Connectors
Microwave Farm s Vertical Launch Connectors are specially designed for solderless vertical PCB launch on test & measurement board. These connectors have excellent electrical transition performance up to
Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz
MMIC Surface Mount Power Splitter/Combiner 2 Way-90 50Ω 5 to 11 GHz The Big Deal Wideband (5-11 GHz) Good Isolation and Return Loss Highly repeatable performance (GaAs based design) No external termination
SFC05-4 ChipClamp ΤΜ Flip Chip TVS Diode Array PRELIMINARY Features
Description The SFC05-4 is a quad flip chip TVS array. They are state-of-the-art devices that utilize solid-state siliconavalanche technology for superior clamping performance and DC electrical characteristics.
TQQ0041T. Band 41 Tx/Rx Filter. Product Overview. Key Features. Functional Block Diagram. Applications. Ordering Information.
Product Overview The TQQ0041T is a high-performance Bulk Acoustic Wave (BAW) Tx / Rx filter designed to meet the strict LTE rejection requirements for use in B41. TQQ0041T is specifically designed to meet
Vertical Launch Connectors
Microwave Farm s are specially designed for solderless vertical PCB launch on test & measurement board. These connectors have excellent electrical transition performance up to 26.5 GHz, 40 GHz,50 GHz &
PLCDA03C-6 thru PLCDA24C-6 LOW CAPACITANCE TVS ARRAY
51-6 -6 LOW APAITANE TVS ARRAY APPLIATIONS Ethernet - 1/1 Base T FireWire SSI Bluetooth & RF IE OMPATIBILITY (EN61-) 61-- (ESD): Air - 15kV, ontact - kv 61-- (EFT): A - 5/5ns 61--5 (Surge): A, /µs - Level
CP05 - CP24C MULTI-LINE TVS ARRAY PIN CONFIGURATIONS
MULTI-LINE TVS ARRAY Description The CPxx and CPxxC series are subminiature monolithic TVS suppressor arrays designed for the protection of sensitive IC components from the damaging effects of Electrostatic
PSLC03 - PSLC24C. 350 watt low capacitance tvs array. applications
350 watt low capacitance tvs array Description The PSLC and PSLCxxC Series of devices are low capacitance TVS arrays available in a SOT-3 package. These devices are designed to protect Ethernet data I/O
PSOT03LC - PSOT36LC 500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
500 WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION The PSOTxxLC series are ultra low capacitance transient voltage suppressor (TVS) arrays, designed for power or data line applications that provide protection
PLC497 ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION SOT-23 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
ULTRA LOW CAPACITANCE STEERING DIODE/TVS ARRAY DESCRIPTION The is an ultra low capacitance steering diode/tvs array. Designed for protection against Electrostatic Discharge (ESD), Electrical Fast Transients
LTCC Hybrid Coupler
1 / 11 1. Description 1-1. Part number: 1-. Features - Hybrid Coupler 3dB, 90 - Surface mount type - Suitable for operation frequency 1150 ~ 1650MHz - RoHS compliance - High stability in temperature and
Monolithic Amplifier CMA-252LN+ Ultra Low Noise, High IP to 2.5 GHz. The Big Deal
Ultra Low, High IP3 Monolithic Amplifier 50Ω The Big Deal 1.5 to 2.5 GHz Ceramic, Hermetically Sealed, Nitrogen filled Low profile case,.045 high Ultra Low High Gain, High IP3 Class 1B HBM ESD (500V) CASE
R R : R packaged in reel of 2000 couplers SMT HYBRID COUPLER GHZ Series : Coupler TECHNICAL DATA SHEET 1 / 5
TECHNICAL DATA SHEET 1 / 5 R41.211.502 R41.211.502 : R41.211.500 packaged in reel of 2000 couplers All dimensions are in mm. TECHNICAL DATA SHEET 2 / 5 R41.211.502 ELECTRICAL CHARACTERISTICS Specified
MLVG0402 Series Engineering Specification
RoHS Pb MLVG0402 Series Engineering 1. Scope (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating termination
PLCDA03C-6 - PLCDA15C-6
5 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY Description The PLCDAxxC-6 Series are low capacitance multi-line transient voltage suppressor arrays that provides board level protection for standard TTL and
Gain Equalizers EQY-SERIES. Microwave. The Big Deal
Microwave Gain Equalizers 50Ω DC to 6 GHz EQY-SERIES The Big Deal Excellent Return Loss, 20dB typ. Wide bandwidth, DC - 6 GHz Small Size, 2 mm x 2 mm CASE STYLE: MC1631-1 Product Overview EQY series of
Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480) mm (V) Series DC to 67.
The Performance Leader in Microwave Connectors 1.85 mm (V) Series DC to 67.0 GHz Connectors Supplement to Catalog Southwest Microwave, Inc. Tempe, Arizona, USA +1 (480) 78-0201 infompd@southwestmicrowave.com
LCD05C - LCD24C HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION 16 PIN DIP PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
HIGH POWERED MULTI-LINE TVS ARRAY DESCRIPTION The LCD Series are high powered multi-line TVS arrays available in a 16 pin DIP package. This series is designed to protect high-speed applications from the
Impedance (Ω) at DC Resistance
Type BMB-A Series Key Features Effective EMI Protection Wide Frequency Characteristics High soldering Heat Resistance Various Package Sizes Available Suited to a Variety of Applications Terminal finish
AOZ8204. Four-line TVS Diode Array. Features. General Description. Applications
AOZ80 Four-line TS Diode Array General Description The AOZ80 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and SD. This state-of-the-art device
RClamp3328P. Low Capacitance RClamp. 8-Line Protection PRELIMINARY
PROTECTION PRODUCTS - RailClamp Description The RClamp provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±3kV air discharge
2.6 GHz capable, 10 W carrying power (at 2.6 GHz), 50Ω/75Ω impedance and 1 Form C relays
.6 GHz capable, W carrying power (at.6 GHz), 5Ω/75Ω impedance and Form C relays RE RELAYS (ARE)..44..44 mm inch FEATURES Excellent high frequency characteristics (to.6ghz) Surface-mount type also available
AOZ8102. Ultra-Low Capacitance TVS Diode Array. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from SD and lightning. This device incorporates eight surge
MAX2009/MAX2010 Evaluation Kits
19-2972; Rev 0; 9/03 MAX2009/MAX2010 Evaluation Kits General Description The MAX2009/MAX2010 evaluation kits (EV kits) simplify the evaluation of the MAX2009 and MAX2010. These kits are fully assembled
SP5001 Series 4 Channel Common Mode Filter with ESD Protection
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel Common Mode Filter with ESD Protection RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF) providing
DATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier.
MMIC Silicon Bipolar Broadband Amplifier NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN621 Rev 0.00
RClamp3346P. Low Capacitance RClamp 6-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 6-Line ESD Protection PROTECTION PRODUCTS Description The RClamp provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV
DSL03-24T ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION SOT-23-6 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS
ULTRA LOW CAPACITANCE STEERING DIODE/THYRISTOR ARRAY DESCRIPTION The provides ESD, EFT and surge protection for high-speed data interfaces. The 24V thyristor array, steering diode combination device meets
FX5767 FX GHz DPDT Switch Module. Features. Description. Block Diagram. Application. Broadband support GHz. Compatible with 3G/LTE
FX5767 0.7-3.0GHz DPDT Switch Module Description The FX5767 is a DPDT (Double-pole double-throw) switch module, designed for multimode broadband 3G/LTE cellular applications, supporting from 700MHz to
INPAQ Global RF/Component Solutions
TVN 0201 01 SP0 Specification Product Name Series Part No Transient Voltage Suppressor TVS Series TVN 0201 01 SP0 Size EIA 0201 TVN 0201 01 SP0 Engineering Specification 1. Scope TVN 0201 01 SP0 is a TVS
RClamp5011ZA. Ultra Small RClamp 1-Line, 5V ESD Protection. PROTECTION PRODUCTS - RailClamp Description. Features. Mechanical Characteristics
- RailClamp Description RClamp TVS diodes are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed to replace 21 size multilayer varistors (MLVs) in portable
Wirewound Chip Inductors
FEATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) HIGH CURRENT AND LOW DCR *See Part Number System for Details REFLOW SOLDERING APPLICABLE TAPE & REEL PACKAGING FOR AUTOMATIC PICK-PLACE Specifications
DATASHEET ISL Features. Applications. Ordering Information. Typical Application Circuit. MMIC Silicon Bipolar Broadband Amplifier
MMIC Silicon Bipolar Broadband Amplifier NOT RECOMMENDED FOR NEW DESIGNS RECOMMENDED REPLACEMENT PARTS ISL5512, ISL5515 DATASHEET FN6199 Rev. The ISL555, ISL557, ISL558 and ISL559, ISL551, ISL5511 constitute
Typical Performance 1. 2 OIP3 _ measured with two tones at an output of 0 dbm per tone separated by 1 MHz. RFout
Device Features 3 ~ 3.3V supply No Dropping Resistor Required No matching circuit needed Lead-free/Green/RoHS compliant SOT-343 package Product Description BeRex s BGS6 is a high SiGe HBT MMIC amplifier,
SP2574NUTG 2.5V 40A Diode Array
TVS Diode Arrays (SPA Diodes 2.5V 40A Diode Array RoHS Pb GREEN Description The is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge, CDE (cable discharge
6 Channel EMI Filter Array with ESD Protection
6 Channel EMI Filter Array with ESD Protection Features Six channels of EMI filtering for data ports Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C) network Greater than 32dB attenuation
AOZ8204DI. Four-line TVS Diode Array. Features. General Description. Applications
AOZ80DI Four-line TS Diode Array General Description The AOZ80 is a transient voltage suppressor diode array designed to protect data lines from high transient conditions and SD. This state-of-the-art
Specification For LTCC 3dB Hybrid Coupler
Specification For LTCC 3dB Hybrid Coupler Model Name : Customer : Title: Name : APPROVED By Date : Signature : RN2 Technologies co., Ltd. RN2 Technologies co., Ltd. 284-2, Galgot-ri, Jinwe-myeon, Pyeongtaek-si,
TQM4M9073 Through Line
Applications General Purpose Wireless RF bypass paths Microwave Radio Test & Measurement Scientific Instruments 16-pin 3x3mm leadless SMT package Product Features Functional Block Diagram DC 6 GHz 50 ohm
SP5001 Series 4 Channel TVS Common Mode Filter
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel TVS Common Mode Filter RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF providing both ESD protection
for Bluetooth/Wimax Application
ANTENNA PRODUCTS Sept., 2008 V8 Tommy Chen Page 1 sheet 190-1 A4 for Bluetooth/Wimax Application Quick Reference Data Centre Frequency Bandwidth VSWR Polarization Azimuth Beamwidth Peak Gain Impedance
RF Probing With Rohde & Schwarz ZNB VNA. PacketMicro, Inc Wyatt Drive, Suite 9, Santa Clara, CA
RF Probing With Rohde & Schwarz ZNB VNA PacketMicro, Inc. 1900 Wyatt Drive, Suite 9, Santa Clara, CA 95054 www.packetmicro.com Outline Why RF Probing Page 3 4 S-Probe Overview Page 5-8 RF Probing Tips
ML Varistor Series. Surface Mount Varistors
Pb The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
Baluns and 90 Degree Hybrid Couplers. Directional Couplers. Attenuators, Resistors and Terminations. Combiners/Dividers
Baluns and 90 Degree Hybrid Couplers Directional Couplers Combiners/Dividers Attenuators, Resistors and Terminations RF and Microwave Passive Components for Military, Medical, Industrial and Wireless Applications
Enables prolonged battery life. Saves DC power consumption when it is not reguired.
Ultra Low Noise, Low Current, Shutdown Monolithic Amplifier 50Ω 10 to 13 GHz The Big Deal Ultra-low noise figure, 1.3 db Low Current, 13 ma at 3V and 29mA at 5V Excellent ESD protection, Class 1C Small
TGL2206-SM GHz 100 Watt VPIN Limiter
Applications Receive Chain Protection Commercial and Military Radar 5 mm x 5 mm QFN Package Product Features Functional Block Diagram Frequency Range: 2.0 to 5.5 GHz Insertion Loss: < 1.0 db Peak Power
RClamp7524T. Low Capacitance RClamp 4-Line ESD Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Low Capacitance RClamp 4-Line ESD Protection PROTECTION PRODUCTS Description RailClamp TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series
SP2555NUTG 2.5V 45A Diode Array
SP2555NUTG 2.5V 45A Diode Array RoHS Pb GREEN Description The SP2555NUTG is a low-capacitance, TVS Diode Array designed to provide protection against ESD (electrostatic discharge), CDE (cable discharge
Control Devices Surface Mount Input-Limiting Diode Element
GC4212-6LP Datasheet Control Devices Surface Mount Input-Limiting Diode Element Released December 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Applications...
INPAQ. Specification TVN AB0. Product Name Transient Voltage Suppressor Series TVS Series Part No TVN AB0 Size EIA 0201
TVN 0201 01 AB0 Specification Product Name Transient Voltage Suppressor Series TVS Series Part No TVN 020101 AB0 Size EIA 0201 TVN 0201 01 AB0 Engineering Specification 1. Scope TVN 0201 01 AB0 is a TVS
Electrostatic Discharged Protection Devices (ESD) Data Sheet
Electrostatic Discharged Protection Devices (ESD) Data Sheet Description is surge rated diode arrays designed to protect high speed data interfaces. It has been specifically designed to protect sensitive
AQ1003 Series - 30pF 30kV Unidirectional Discrete TVS
General Purpose ESD Protection - SP003 AQ003 Series AQ003 Series - 30pF 30kV Unidirectional Discrete TVS RoHS Pb GREEN Description This diode is fabricated in a proprietary silicon avalanche technology
"High Frequency Ceramic Solutions"
Designed for: BAN, Bluetooth, 802.11, WLAN, igbee, Propietary Protocol, ISM, Smart Energy, WiMax Page 1 of 9 General Specifications Part Number Operating Frequency (MHz) Impedance Operating Temperature
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION DESCRIPTION DRAWN Y DESIGNED Y CHECKED Y APPROVED Y TVL 0201 01 SP0 Sandy Aaron Aaron YuChiaChang TVL 0201 01 SP0 Engineering 1. Scope TVL 0201 01 SP0 is a TVS diode designed to protect
TVL AB0 Product Engineering Specification
1. Scope TVL 0201 01 A0 Product TVL 0201 01 A0 is a TVS diode designed to protect one power/control line or one low speed signal line from overvoltage hazard of Electrostatic Discharge (ESD). These interfaces
PLC WATT ULTRA LOW CAPACITANCE TVS ARRAY DESCRIPTION SO-8 PACKAGE APPLICATIONS FEATURES MECHANICAL CHARACTERISTICS PIN CONFIGURATION
00 WATT ULTRA LOW CAPACITAE TVS ARRAY DESCRIPTION The is an ultra low capacitance TVS array that provides two lines of protection. This device protects high-frequency applications such as voice and data
SCT500D Twin SMD Ceramic PTC Thermistor
Desciption The component consists of two high-performance ceramic PTCs mounted in a lead-frame for (SMD) direct soldering onto a printed-circuit board (PCB) or substrate. The ceramic PTCs are soldered
SMS Volt TVS Array For ESD and Latch-Up Protection. PROTECTION PRODUCTS Description. Features. Mechanical Characteristics.
Description The SMS series of TS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD, lightning, and other voltage-induced transient events. Each device will protect
(LRC) Metal Strip Chip Current Sense Resistor. Token Electronics Industry Co., Ltd. Version: January 12, Web:
Version: January 12, 2017 (LRC) Metal Strip Chip Current Sense Resistor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
LCD and Camera EMI Filter Array with ESD Protection
LCD and Camera EMI Filter Array with ESD Protection Features Six and eight channels of EMI filtering with integrated ESD protection 0.4mm pitch, 15-bump, 2.360mm x 1.053mm footprint Chip Scale Package
DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER UDD32CXXL01 series
Product specification November 05, 2018 V.0 DATA SHEET ELECTROSTATIC DISCHARGE PROTECTION DEVICES INDUSTRIAL / CONSUMER series RoHS compliant & Halogen free 2 Electrostatic Discharged Protection Devices
AQ1026 Series 15pF 30kV Bidirectional Discrete TVS
General Purpose ESD Protection - AQ126 SP126 Series AQ126 Series 15pF 3kV Bidirectional Discrete TVS RoHS Pb GREEN Description Avalanche breakdown diodes fabricated in a proprietary silicon avalanche technology
Skill Development Centre by AN ISO CERTIFIED COMPANY
Skill Development Centre by AN ISO CERTIFIED COMPANY Industrial Automation Training Embedded/ VLSI system design Electrical control panel Design Product Development Fiber optics Technician Electrician
MHz SAW Filter
Applications For ISM applications Bluetooth Product Features Functional Block Diagram Top view Usable bandwidth 83.5 MHz High Attenuation Singleended operation Ceramic Surface Mount Package (SMP) No Impedance
AOZ8900. Ultra-Low Capacitance TVS Diode Array PRELIMINARY. Features. General Description. Applications. Typical Application
Ultra-Low Capacitance TS Diode Array General Description The is a transient voltage suppressor array designed to protect high speed data lines from Electro Static Discharge (ESD) and lightning. This device
AOZ8809ADI. Ultra-Low Capacitance TVS Diode. Features. General Description. Applications. Typical Applications
Ultra-Low Capacitance TVS Diode General Description The AOZ889ADI is a transient voltage suppressor array designed to protect high speed data lines such as HDMI 1.4/2., USB 3./3.1, MDDI, SATA, and Gigabit
2 Channel Headset EMI Filter with ESD Protection
2 Channel Headset EMI Filter with ESD Protection Features Two channels of EMI filtering, one for a microphone and one for an earpiece speaker Pi-style EMI filters in a capacitor-resistor-capacitor (C-R-C)
Typical Performance 1. WCDMA 4FA_ACLR dbm LTE20M ACLR dbm
Device Features OIP3 = 48.5dBm @ 700 MHz Gain = 22.0 db @ 700 MHz Output P1 db = 33dBm @ 700 MHz 50 Ω Cascadable Highly Reliable InGaP/GaAs HBT Technology Lead-free/RoHS-compliant 24L QFN 4X4 SMT package
SP pF 30kV Bidirectional Discrete TVS
SP1326 15pF 30kV Bidirectional Discrete TVS RoHS Pb GREEN Description The SP1326 back-to-back diodes are fabricated in a proprietary silicon avalanche technology. These diodes provide a high ESD (electrostatic
Monolithic Amplifier CMA-545G1+ Low Noise, High IP to 2.2 GHz. The Big Deal
Low Noise, High IP3 Monolithic Amplifier 50Ω The Big Deal 0.4 to 2.2 GHz Ceramic, Hermetically Sealed, Nitrogen filled Low profile case,.045 high High Gain, 31.5 db Low Noise Figure, 1.0 db High IP3, 35-37
ISL MMIC Silicon Bipolar Broadband Amplifier. Features. Ordering Information. Applications. Typical Application Circuit
ISL55 Data Sheet August 25, 1 FN258.2 MMIC Silicon Bipolar Broadband Amplifier The ISL55 is a high performance gain block featuring a Darlington configuration using high f T transistors and excellent thermal
SFI Electronics Technology. Super High Network (SHN) Series. Approval Sheet. Customer Information. Part No. : Model No. : Company Purchase R&D
Approval Sheet Customer Information Customer : Part Name : Part No. : Model No. : Company Purchase R&D Vendor Information Name: Part Name Part No. INC. Chip Surge Protection Device (CSPD) Series Lot No.
RFSA2023TR7. Voltage Controlled Attenuator. Product Overview. Key Features. Functional Block Diagram Applications. Ordering Information
Product Overview Qorvo's is a fully monolithic analog voltage control attenuator (VCA) featuring exceptional linearity over 30dB adjustment range with on-chip temperature compensation. incorporates a revolutionary
X2Y - series Surface-mount ceramic EMI filter
DISCRETE CERAMICS X2Y series Surface mount component June 2002 Rev 6 X2Y - series 2002 July 26 v1.07 www.yageo.com X2Y Series Table of Contents 1. Introduction, Benefits, Applications 2. Available Capacitances
Model XEC24E3-03G. Hybrid Coupler 3 db, 90
Hybrid Coupler 3 db, 90 Description The XEC24E3-03G is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for IMS band,
April Common Mode Filters. With built-in ESD protection element type. TCE series. * Dimensions Code JIS[EIA]
![April Common Mode Filters. With built-in ESD protection element type. TCE series. * Dimensions Code JIS[EIA]](/thumbs/86/94868463.jpg "April Common Mode Filters. With built-in ESD protection element type. TCE series. * Dimensions Code JIS[EIA]")
E M C C o m p o n e n t s April 204 Common Mode Filters With built-in ESD protection element type TCE series TCE0806G TCE0806S TCE608G [0302 inch]* [0302 inch] [0603 inch] * Dimensions Code JIS[EIA] (2/4)
PESD0402MS05 Surface Mount Polymeric ESD Suppressor
\ Description polymeric ESD suppressor help protect sensitive electronic equipment against electrostatic discharge (ESD) without distorting data signals. This protection is a result of its ultra-low capacitance
EM8D-100L EMI FILTER/TVS ARRAY DESCRIPTION DFN-16 PACKAGE FEATURES APPLICATIONS MECHANICAL CHARACTERISTICS CIRCUIT DIAGRAM & PIN CONFIGURATION
EMI FILTER/TVS ARRAY DESCRIPTION The is a DFN-16, 8 line low pass filter array with integrated TVS diodes. The is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed
Specification For LTCC 4-Phased Antenna Feeder (Quadrifilar)
Specification For LTCC 4-Phased Antenna Feeder (Quadrifilar) Model Name : Customer : Title: Name : APPROVED By Date : Signature : RN Technologies co., Ltd. Issued Date : Designed : Approved : / 11 1. Description
ML Varistor Series. Surface Mount Varistors. Features. Size Metric EIA
The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
Single Line ESD Protection Diode Array
General Description Single Line ESD Protection Diode Array SOD523 The ESD protection diode is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers,