Ultra-Low Phase Jitter LVDS SMD Clock Oscillator
|
|
|
- Roger Heath
- 6 years ago
- Views:
Transcription
1 Ultra-Low Phase Jitter LDS SMD Clock Oscillator ESD Sensitive Moisture Sensitivity Level MSL 3 FEATURES: 50MHz LDS Typical phase noise: 121fs (Integration range: 1.875MHz-20MHz) ±50ppm total frequency stability over -40 to +85 temperature range Industry standard 6-Pin 5 x 3.2mm LGA package KEY ELECTRICAL SPECIFICATIONS Absolute Maximum Ratings Item Supply oltage Storage Temp. Lead Temp.(soldering, 10s) ESD (HBM) Minimum Maximum Unit k APPLICATIONS: Communications Backplane reference clock SERDES reference clock FPGA Condition DD = , TA = -40 to +85, outputs terminated with 100 Ohms between Q and /Q.(1) Parameters Frequency Operating Temperature (TA) Overall Frequency Stability (2) Supply oltage (DD) Supply Current (IDD) Output Logic Level Minimum OH OL Output Differential oltage (OD) Common Mode Output voltage (CM) Start-up Time Rise Time (Tr) Fall Time (Tf) Duty Cycle Integration Range: 12kHz to 20MHz Phase Noise Integration Range: 1.875MHz to 20MHz Notes: Typical Maximum Units MHz ppm ma m ms ps % Notes OH max= CM max+1/2 OD max OL min= CM min-1/2 OD max RL=100Ω, CL=0pF 20% to 80% fsrms 121 Guaranteed after thermal equilibrium Inclusive of initial accuracy, temperature drift, aging, shock, vibration from -40 to +85. PART IDENTIFICATION ASFLMX MHz -5ABB Packing Blank: Bulk or Tube T: Tape & Reel (1k/reel)
2 Ultra-Low Phase Jitter LDS SMD Clock Oscillator TYPICAL PHASE NOISE ASMP
3 Ultra-Low Phase Jitter LDS SMD Clock Oscillator OUTLINE DIMENSION Ref. A A1 A2 D D1 E E1 b c e f k m n Min Nom BSC BSC BSC Max ASMP Dimensional Tolerance aaa bbb Recommended Land Pattern Dimensions: mm
4 Ultra-Low Phase Jitter LDS SMD Clock Oscillator PIN CONFIGURATION Pin # Pin Name Pin Type Pin Level 1 OE I, SE LCMOS DNC GND Q /Q DD PWR O O PWR LDS LDS ASMP Pin Function Output Enable, disables output to tri-state. 0 = Disabled, 1= Enabled, 50k Ω Pull-up Make no connection, leave floating Power Supply Ground Clock Output Complimentary Clock Output Power Supply REFLOW PROFILE Parameters Average Ramp-up Rate Pre-Heat Temp Temp > 217 Peak Temperature Peak Temperature Ramp-down Rate Time 25 to Peak Temp. Specifications 3 /second max second second second / -5-6 / second max. 8 minutes max.
5 Ultra-Low Phase Jitter LDS SMD Clock Oscillator TAPE & REEL ASMP T= Tape & Reel, 1000pcs/reel. Reel Size = 7-inch Reel MSL-3 packaging applies to T option. Blank = Bulk or Tube (60pcs/tube) MSL-3 packaging applies to MOQ=60 units (tube) ~ ±0.10 All sides 3.70± Ref / Ref. Dimensions: mm ATTENTION: Abracon Corporation s products are COTS Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
Ultra-Low Phase Jitter LVPECL SMD Clock Oscillator
Ultra-Low Phase Jitter LPECL SMD Clock Oscillator ESD Sensitive Moisture Sensitivity Level MSL 3 APPLICATIONS: 10/40/400 Gigabit Ethernet Fibre Channel 10G/12G SERDES FEATURES: 156.25MHz LPECL Typical
Ultra-Low Phase Jitter LVPECL SMD Clock Oscillator
Ultra-Low Phase Jitter LPECL SMD Clock Oscillator ASMX-156.250MHz-3BNR ESD Sensitive Moisture Sensitivity Level MSL 3 APPLICATIONS: 10/40/400 Gigabit Ethernet Fibre Channel 10G/12G SERDES FEATURES: 156.25MHz
ESD Sensitive. Parameters Minimum Typical Maximum Units Notes ppm. Parameters Minimum Typical Maximum Units Notes
Moisture Sensitivity Level (MSL) 1 FEATURES: LVCMOS, LVDS or LVPECL output option +2.5V or +3.3V operation -40 C to +85 C standard operating temperature range Ultra low RMS Jitter: 0.5ps typical, 1.0ps
STANDARD SPECIFICATIONS:
Moisture Sensitivity Level MSL 1 FEATURES: APPLICATIONS: Ultra Miniature Pure SiliconTM Clock Oscillator Storage Area Networks (SATA, SAS, Fiber Channel) High Performance MEMS Technology by Discera Passive
PERFORMANCE PLASTIC PACKAGE ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATOR
STANDARD SPECIFICATIONS: Moisture Sensitivity Level MSL 1 APPLICATIONS: FEATURES: Ultra Miniature Pure Silicon TM Clock Oscillator High Performance MEMS Technology by Discera Low Power Consumption for
PERFORMANCE PLASTIC PACKAGE ULTRA MINIATURE PURE SILICON TM CLOCK OSCILLATOR ASEMP
Moisture Sensitivity Level MSL 1 APPLICATIONS: FEATURES: Ultra Miniature Pure Silicon TM Clock Oscillator High Performance MEMS Technology by Discera Low Power Consumption for high speed communication
3.3V CMOS/PECL/LVDS OUTPUT SMD VCXO
FEATURES: CMOS, PECL or LVDS Output Low Integrated rms jitter (1 max. over 12kHz to 20MHz BW) Low Profile, Seam-Sealed Package (5.08 x 7.0 x1.8mm) Wide Frequency Pull Range (±100 ppm min.) Pb RoHS/RoHS
PLASTIC PACKAGE INDUSTRIAL GRADE ULTRA MINIATURE PURE SILICONTM CLOCK OSCILLATOR ASEMB
Moisture Seitivity Level MSL 1 3.2 x 2. x 0.mm APPLICATIONS: FEATURES: Ultra Miniature Pure Silicon Clock Oscillator 2nd Generation MEMS Technology with reduced jitter by Discera Low Power Coumption
VDD = V, TA = -40 C to +85 C, outputs terminated with 100 Ohms between Q and /Q.³
Ultra-Low Jitter 200MHz LVDS XO ClockWorks FUSION General Description The is an ultra-low phase jitter XO with LVDS output optimized for high line rate applications. Features 200MHz LVDS Typical phase
PLASTIC PACKAGE INDUSTRIAL GRADE ULTRA MINIATURE PURE SILICONTM CLOCK OSCILLATOR ASFLMB
ASEMB Moisture Seitivity Level MSL 1.0 x 3.2 x 0.mm APPLICATIONS: FEATURES: Pure Silicon Clock Oscillator 2nd Generation MEMS Technology with reduced jitter by Discera Low Power Coumption < Exceptional
CLEARCLOCK POWER OPTIMIZED 0.12ps 5x7mm XO
FEATURES APPLICATIONS 0.125ps typ jitter (150fs MAX f > 200MHz, 25 C Highest in-class frequency range from 50 to 2100MHz Excellent spurious suppresion 70mA MAX I DD (LVDS, any V DD Lowest in-class power
Micrel Inc Fortune Drive San Jose, CA USA tel +1 (408) fax + 1 (408)
DSC2311KL2R008 Crystalless Configurable Clock Generator General Description DSC2311KL2R008 is a crystalless clock generator that is factory configurable to simultaneously output two separate frequencies
Real Time Clock Module with I2C Bus
Moisture Seitivity Level: MSL=1 FEATURES: APPLICATIONS: With state-of-the-art RTC Technology by Micro Crystal AG Wide range in communication & measuring equipment RTC module with built-in crystal oscillating
CARDINAL COMPONENTS, INC.
SERIES CJTDAE CJTDAL The Cardinal Cappuccino Crystal Oscillator LVDS/ LVPECL TCXO Features 3.3V supply voltage- configurable 10MHz to 250MHz LVDS and LVPECL outputs- configurable Better than 2Hz tuning
Control Circuitry 2 M1. Micrel Inc Fortune Drive San Jose, CA USA tel +1 (408) fax + 1 (408)
Crystal-less Configurable Clock Generator General Description The is a programmable, high performance dual LVDS output oscillator utilizing Micrel's proven silicon MEMS technology to provide excellent
CARDINAL COMPONENTS, INC.
SERIES CJAL CJAE The Cardinal Cappuccino Crystal Oscillator LVDS/ LVPECL Features 2.5V or 3.3V supply voltageconfigurable 10MHz to 250MHz LVDS and LVPECL outputs- configurable Better than 2Hz tuning resolution
Accelerate the speed of circuit design...oscillators in seconds, not days!
Accelerate the speed of circuit design...oscillators in seconds, not days! The MEMSpeed Pro oscillators operate down to 4mA with 1uA standby current! Introducing the MEMSpeed Pro, Low Power Oscillator
Control Circuitry 2 M1. Micrel Inc Fortune Drive San Jose, CA USA tel +1 (408) fax + 1 (408)
DSC2044FE1H0002 Crystalless Configurable Clock Generator General Description The DSC2044FE1H0002 is a programmable, high performance dual HCSL output oscillator utilizing Micrel's proven silicon MEMS technology
DSC Q0093. General Description. Features. Applications. Block Diagram. Crystal-less Configurable Clock Generator
Crystal-less Configurable Clock Generator General Description The is a four output crystal-less clock generator. It utilizes Microchip's proven PureSilicon MEMS technology to provide excellent jitter and
Features. o HCSL, LVPECL, or LVDS o Mixed Outputs: LVPECL/HCSL/LVDS. o Ext. Industrial: -40 to 105 C o o. o 30% lower than competing devices
DSC55704 Crystalless Three Output PCIe Clock Generator General Description The DSC55704 is a Crystalless, three output PCI express clock generator meeting Gen1, Gen2, and Gen3 specifications. The clock
PI6C557-01BQ. PCIe 3.0 Clock Generator with 1 HCSL Outputs. Features. Description. Pin Configuration (16-Pin TQFN) Block Diagram
s Features ÎÎPCIe 3.0 compliant à à Phase jitter - 0.45ps RMS (High Freq. Typ.) ÎÎLVDS compatible output ÎÎSupply voltage of 3.3V ±10% ÎÎ25MHz crystal or clock input frequency ÎÎHCSL outputs, 0.8V Current
DSC2033. Low-Jitter Configurable Dual LVDS Oscillator. General Description. Features. Block Diagram. Applications
General Description The series of high performance dual output LVDS oscillators utilize a proven silicon MEMS technology to provide excellent jitter and stability while incorporating additional device
2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Description. Features. Block Diagram DATASHEET
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) or LVDS input pairs
2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS Features
DATASHEET 2:1 MULTIPLEXER CHIP FOR PCI-EXPRESS ICS557-08 Description The ICS557-08 is a 2:1 multiplexer chip that allows the user to select one of the two HCSL (Host Clock Signal Level) input pairs and
Typical Applications Base Stations C MHz 700 MHz. Reference Frequency. Parameter Min Typ Max Units Condition
FX-401 Frequency Controlled Crystal Oscillator Features Reflow Process Compatible Surface Mount Package Low Phase Noise Build in PLL-Circuit Typical Applications Base Stations Previous Vectron Model Number
PI6C Low Power Networking Clock Generator. Description. Features. Block Diagram. 100MHz PCI-Express 0 100MHz PCI-Express 1 100MHz PCI-Express 2
Features ÎÎ25 MHz crystal or clock input ÎÎThree differential 100 MHz PCI-Express clock outputs push-pull termination ÎÎSpread spectrum capability on all 100 MHz PCI-e clock outputs with -0.5% down spread
TF90LVDS047-6CG. Quad LVDS Line Driver with Flow-Through Pinout. Description. Features. Applications. Function Diagram. Ordering Information
Features Companion driver to Quad Extended Common Mode LVDS Receiver TF0LVDS048 DC to 400 Mbps / 200 MHz low noise, low skew, low power operation t 350 ps (max) channel-to-channel skew t 250 ps (max) pulse
Triangular spread spectrum profile for maximum EMI reduction (Si50122-A2) 2.5 V, 3.3 V Power supply. (2.0 x 2.5 mm) down spread outputs
CRYSTAL-LESS PCI-EXPRESS GEN1 DUAL OUTPUT CLOCK GENERATOR Features Crystal-less clock generator with integrated CMEMS PCI-Express Gen 1 compliant Triangular spread spectrum profile for maximum EMI reduction
TF10CP02 / TF10CP Gbps 2x2 LVDS Crosspoint Switches. Features. Description. Applications. Function Diagram. Ordering Information.
Features DC to 1.5 Gbps low jitter, low skew, low power operation Pin configurable, fully differential, non-blocking architecture eases system design and PCB layout On-chip 100W input termination minimizes
2 TO 4 DIFFERENTIAL CLOCK MUX ICS Features
DATASHEET 2 TO 4 DIFFERENTIAL CLOCK MUX ICS557-06 Description The ICS557-06 is a two to four differential clock mux designed for use in PCI-Express applications. The device selects one of the two differential
Features. Applications
HCSL-Compatible Clock Generator for PCI Express General Description The is the smallest, high performance, lowest power, 2 differential output clock IC available for HCSL timing applications. offers -130dBc
OBSOLETE PI6C Low Power Networking Clock Generator. Description. Features. Block Diagram
Features ÎÎ3.3V supply voltage ÎÎ25MHz XTAL or reference clock input ÎÎOutput 4x100MHz HCSL PCIe clock outputs with integrated series termination resistors, spread spectrum capability on all 100MHz PCIe
Digital "Mini" SiSonic TM Microphone Specification - Halogen Free. Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Digital "Mini" SiSonic TM Microphone Specification - Halogen Free Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 Sheet 1 of 11 1. DESCRIPTION AND APPLICATION 1.1 DESCRIPTION Digital "Mini" Surface
VT-820 VT-820. Temperature Compensated Crystal Oscillator Previous Vectron Model VTM3. Description
VT-820 Temperature Compensated Crystal Oscillator Previous Vectron Model VTM3 VT-820 Description Vectron s VT-820 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
User Selectable Up to Two Frequencies LVDS, LVPECL OR CMOS. 6 Pad Standard Package
MVQI Series 5X7 Ceramic SMD VCXO User Selectable Up to Two Frequencies LVDS, LVPECL OR CMOS 6 Pad Standard Package OneClock Range CMOS Range LVDS & LVPECL Temperature Stability* Operating Temperature Range
CAP+ CAP. Loop Filter
STS-12/STS-3 Multirate Clock and Data Recovery Unit FEATURES Performs clock and data recovery for 622.08 Mbps (STS-12/OC-12/STM-4) or 155.52 Mbps (STS-3/OC-3/STM-1) NRZ data 19.44 MHz reference frequency
ICS548A-03 LOW SKEW CLOCK INVERTER AND DIVIDER. Description. Features. Block Diagram DATASHEET
DATASHEET ICS548A-03 Description The ICS548A-03 is a low cost, low skew, high-performance general purpose clock designed to produce a set of one output clock, one inverted output clock, and one clock divided-by-two.
SM Features. General Description. Applications. Block Diagram
ClockWorks Fibre Channel (106.25MHz, 212.5MHz) Ultra-Low Jitter, LVDS Frequency Synthesizer General Description The is a member of the ClockWorks family of devices from Micrel and provides an extremely
SM General Description. Features. Block Diagram. ClockWorks TM 125MHz LVDS / 125 MHz HCSL Ultra-Low Jitter Frequency Synthesizer
ClockWorks TM 125MHz LVDS / 125 MHz HCSL Ultra-Low Jitter Frequency Synthesizer General Description The is a member of the ClockWorks family of devices from Micrel and provides an extremely low-noise timing
Two Outputs Clock Generator AK8146B
ASAHI KASEI EMD CORPORATION Two Outputs Clock Generator AK8146B Features Pin Selectable External Input - 74.17582MHz - 74.25MHz - 60MHz Clock out Frequencies: - 12.000MHz - 13.5MHz Low Jitter Performance
VCXO. Contact Sales. North America T: +1 (800) Asia T: All Other Regions T: +1 (508)
Contact Sales North America T: +1 (800) 982-5737 Asia T: +65-6481-1466 All Other Regions T: +1 (508) 435-6831 frequencysales@ctscorp.com www.ctscorp.com 2016.10 - KGC CTS broad portfolio of Voltage Controlled
Performance Specifications. Frequency Stabilities Parameter Min Typ Max Units Condition
PX-400 Clock Oscillator PX-400 PX-400 Features Commercial and MIL models Fully RoHS Compliant * No Pure-Tin Temperature range from 0 C to 70 C to -55 C to +125 C Standard 4 and 14 pin DIP hermetic packages
PCIe 3.0 Clock Generator with 4 HCSL Outputs. Description OE VDDXD S0 S1 S2 X1 X2 PD OE GNDXD IREF CLK0 CLK0 CLK1 CLK1 CLK2 CLK2 CLK3 CLK3
PCIe 3.0 Clock Generator with 4 HCSL Outputs Features PCIe 3.0 complaint PCIe 3.0 Phase jitter: 0.48ps RMS (High Freq. Typ.) LVDS compatible outputs Supply voltage of 3.3V ±5% 25MHz crystal or clock input
CARDINAL COMPONENTS. FREQUENCY A MHz. Specifications: Min Typ Max Unit
Re-Configurable 6 Output PECL TCXO Fixed & Re-Configurable Multi-Frequency Oscillator Intuitive software and I 2 C interface Easily update system Industry-standard packaging saves on board space Mult.
ASM5P2308A. 3.3 V Zero-Delay Buffer
3.3 V Zero-Delay Buffer Description ASM5P2308A is a versatile, 3.3 V zero delay buffer designed to distribute high speed clocks. It is available in a 16 pin package. The part has an on chip PLL which locks
Not recommended for new designs
Eight Output Differential Buffer for PCI-Express Recommended Application: DB800 Intel Yellow Cover part with PCI-Express support. Output Features: 8-0.7V current-mode differential output pairs Supports
T1/E1 CLOCK MULTIPLIER. Features
DATASHEET ICS548-05 Description The ICS548-05 is a low-cost, low-jitter, high-performace clock synthesizer designed to produce x16 and x24 clocks from T1 and E1 frequencies. Using IDT s patented analog/digital
Pin Configuration and Selector Guide appear at end of data sheet. Typical Operating Circuits
Rev 2; 4/08 106.25MHz/212.5MHz/425MHz General Description The DS4106, DS4212, and DS4425 ceramic surfacemount crystal oscillators are part of Maxim s DS4-XO series of crystal oscillators. These devices
Wireless Access Point Server/Storage DIFF1 DIFF2
PCI-EXPRESS GEN 1, GEN 2, AND GEN 3 1:2 FAN-OUT CLOCK BUFFER Features PCI-Express Gen 1, Gen 2, and Gen 3 compliant devices Two low-power PCIe clock outputs Supports Serial-ATA (SATA) at 100 MHz No termination
Specification for release - Preliminary
Description: Features: B Schematic and Pin Configuration: ESD Protection for 2 high-speed I/O channels and DD Provide ESD protection for each channel to IEC 61000-4-2 (ESD) ±15k (air), ±8k (contact) IEC
CARDINAL COMPONENTS. Specifications: Min Typ Max Unit
Re-Configurable 6 Output CMOS TCXO Fixed & Re-Configurable Multi-Frequency Oscillator Intuitive software and I 2 C interface Easily update system Software flexible, quick upgrades and changes Industry-standard
SM Features. General Description. Typical Application MHz/312.5MHz and MHz/156.25MHz LVDS Clock Synthesizer.
156.25MHz/312.5MHz and 78.125MHz/156.25MHz LVDS Clock Synthesizer ClockWorks Flex General Description The is a member of the ClockWorks family of devices from Micrel and provides an extremely low-noise
HCMOS 3.2x2.5mm SMD Oscillator O3HS DATASHEET (Former F300, F310, F330, F340, Series)
Stabilities to ±20 PPM.0V ELECTRICAL CHARACTERISTICS Range (F O ).800 ~ 50.000 MHz Supply Voltage (V DD ).0V±5%.800 ~ 32.00 MHz >32.00 ~ 50.000 MHz 2.5 ma 3.5 ma 5 ua Output Symmetry (50% V DD ) 40 % ~
DEI5090 SINGLE-RAIL ARINC 429 LINE DRIVER
Device Engineering Incorporated 385 East Alamo Drive Chandler, AZ 85225 Phone: (480) 303-0822 Fax: (480) 303-0824 E-mail: admin@deiaz.com DEI5090 SINGLE-RAIL ARINC 429 LINE DRIER FEATURES Operates from
PI6LC48L0201A 2-Output LVDS Networking Clock Generator
Features ÎÎTwo differential LVDS output pairs ÎÎSelectable crystal oscillator interface or LVCMOS/LVTTL single-ended clock input ÎÎSupports the following output frequencies: 62.5MHz, 125MHz, 156.25MHz
Specification for release
Description: A Features ESD Protection for 4 high-speed I/O channels and DD Provide ESD protection for each channel to IEC 1000-4-2 (ESD) ±15k (air), ±8k (contact) IEC 1000-4-5 (Lightning) 4A (8/20µs)
Description OUT0 1 OUTA1 OUTA1 2 OUTA2 3 OUTA3 OUTA4 OUTB1 6 OUTB2 7 OUTB2 OUTB3 OUTB4. All trademarks are property of their respective owners.
Features Maximum rated frequency: 133 MHz Low cycle-to-cycle jitter Input to output delay, less than 200ps Internal feedback allows outputs to be synchronized to the clock input Spread spectrum compatible
XRD87L85 Low-Voltage CMOS 8-Bit High-Speed Analog-to-Digital Converter
Low-Voltage CMOS 8-Bit High-Speed Analog-to-Digital Converter April 2002-1 FEATURES 8-Bit Resolution Up to 10 MHz Sampling Rate Internal S/H Function Single Supply: 3.3V VIN DC Range: 0V to V DD VREF DC
1.8V to 3.3V LVCMOS High Performance Clock Buffer Family
1.8V to 3.3V LVCMOS High Performance Clock Buffer Family 5PB11xx DATASHEET Description The 5PB11xx is a high-performance LVCMOS Clock Buffer Family. It has best-in-class Additive Phase Jitter of 50fsec
ICS Frequency Generator and Integrated Buffer. Integrated Circuit Systems, Inc. General Description. Applications.
Integrated Circuit Systems, Inc. ICS9158-03 Frequency Generator and Integrated Buffer General Description The ICS9158-03 is a low-cost frequency generator designed specifically for desktop and notebook
XRD8775 CMOS 8-Bit High Speed Analog-to-Digital Converter
CMOS 8-Bit High Speed Analog-to-Digital Converter April 2002-4 FEATURES 8-Bit Resolution Up to 20MHz Sampling Rate Internal S/H Function Single Supply: 5V V IN DC Range: 0V to V DD V REF DC Range: 1V to
3SM201KMT1KB MEMS Microphone
MEMS Microphone Product Description The is a monolithic MEMS top performing miniature digital microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit
PI6CEQ PCIe Gen2 / Gen3 Buffer. Features. Description. Applications. Block Diagram. Pin Configuration (20-Pin TSSOP & 20-Pin QSOP)
PCIe Gen2 / Gen3 Buffer Features ÎÎPCIe Gen2/ Gen3* compliant clock buffer/zdb * Gen3 performance only available in Commercial temp ÎÎInternal equalization for better signal integrity ÎÎ2 HCSL outputs
Features. Applications
2.5/3.3V 1-to-1 Differential to LVCMOS/LVTTL Translator Precision Edge General Description Micrel s is a 1-to-1, differential-to-lvcmos / LVTTL translator. The differential input is highly flexible and
SP5001 Series 4 Channel TVS Common Mode Filter
Low Capacitance ESD Protection - SP51 Series SP51 Series 4 Channel TVS Common Mode Filter RoHS Pb GREEN Description The SP51 Series is a highly integrated Common Mode Filter (CMF providing both ESD protection
SPECIFICATION. Bulk Acoustic Wave Filter W. DATE September 5, 2014 WISOL. Byun, Kyung-Su. User WISOL CO., LTD.
SPECIFICATION Bulk Acoustic Wave Filter USER USER PART No. WISOL PART No. DOC. No. DATE September 5, 2014 REVISION WISOL Hong, Byung-Chul Byun, Kyung-Su Mun, Gil-Seop ISSUED BY APPROVED BY (R&D) APPROVED
RJ45 10/100/1000 Base-T Jack with Magnetic Module
FEATURES: Excellent EMI suppression Meet IEEE 802.3 standards and FCC mechanical requirements Low Cost, Reflow-able device STANDARD SPECIFICATIONS at 25 C Operating Temperature: - 0 C to + 70 C Storage
LVDS Crystal Oscillator (XO)
LVDS Crystal Oscillator (XO) Features Low jitter crystal oscillator (XO) Less than 1 ps typical root mean square (RMS) phase jitter Low-voltage differential signaling (LVDS) output Output frequency from
CARDINAL COMPONENTS. Specifications: Min Typ Max Unit
Re-Configurable 4 Output CMOS Oscillator Fixed & Re-Configurable Multi-Frequency Oscillator Intuitive software and I 2 C interface Easily update system Software flexible, quick upgrades and changes Industry-standard
SGM803/SGM809/SGM810 Microprocessor Supervisory Circuit in 3-Pin SOT-23
GENERAL DESCRIPTION The supervisory circuits monitor the power supply voltage in microprocessor and digital systems. They provide a reset output during power-up, power-down and brownout conditions. On
3SM201KMF0KB MEMS Microphone
Product Description The is a monolithic MEMS top performing miniature digital microphone based on CMOS foundry process. By integrating an acoustic transducer and an analog amplifier circuit followed by
PI6C49S1510 Rev J
High Performance Differential Fanout Buffer Features ÎÎ10 differential outputs with 2 banks ÎÎUser configurable output signaling standard for each bank: LVDS or LVPECL or HCSL ÎÎLVCMOS reference output
Si53102-A1/A2/A3 PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 1:2 FAN- OUT CLOCK BUFFER. Features. Applications. Description. Functional Block Diagram
PCI-EXPRESS GEN 1, GEN 2, GEN 3, AND GEN 4 1:2 FAN- OUT CLOCK BUFFER Features PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant Two low-power PCIe clock outputs Supports Serial-ATA (SATA)
1K-16K UNI/O Serial EEPROM Family Data Sheet
11AA010/11LC010 11AA080/11LC080 11AA00/11LC00 11AA160/11LC160 11AA040/11LC040 1K-16K UNI/O Serial EEPROM Family Data Sheet Features: Single I/O, UNI/O Serial Interface Bus Low-Power CMOS Technology - 1
Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143
Zero Height SiSonic Microphone Specification Knowles Acoustics 1151 Maplewood Drive Itasca, IL 60143 1of 10 1. DESCRIPTION AND APPLICATION 1.1 Description Zero Height Surface Mount Silicon Microphone 1.2
XRA1202/1202P 8-BIT I2C/SMBUS GPIO EXPANDER WITH RESET
8-BIT I2C/SMBUS GPIO EXPANDER WITH RESET APRIL 2013 REV. 1.0.1 GENERAL DESCRIPTION The XRA1202/1202P is an 8-bit GPIO expander with an I 2 C/SMBus interface. After power-up, the XRA1202 has internal 100K
1.8V/3.0V Single-PLL Clock Generator AK8150C
AK8150C 1.8V/3.0V Single-PLL Clock Generator AK8150C Features Input Frequency: 38 MHz (1.8V or 3.0V) PLL Output Frequency: 12 MHz (1.8V or 3.0V) REF Output Frequency: 38 MHz or 19 MHz (1.8V or 3.0V) Low
1.8V/3.0V Single-PLL Clock Generator
ASAHI KASEI EMD CORPORATION 1.8V/3.0V Single-PLL Clock Generator Features Input Frequency: 36 MHz (1.8V or 3.0V) PLL Output Frequency: 12 MHz (1.8V or 3.0V) REF Output Frequency: 36 MHz or 18 MHz (1.8V
GT24C256 2-WIRE. 256K Bits. Serial EEPROM
GT24C256 2-WIRE 256K Bits Serial EEPROM Copyright 2013 Giantec Semiconductor Inc. (Giantec). All rights reserved. Giantec reserves the right to make changes to this specification and its products at any
SCA620-EF1V1B SINGLE AXIS ACCELEROMETER WITH ANALOG INTERFACE
Datasheet SCA620-EF1V1B SINGLE AXIS ACCELEROMETER WITH ANALOG INTERFACE The SCA620 accelerometer consists of a silicon bulk micro machined sensing element chip and a signal conditioning ASIC. The chips
HDMI to FMC Module User Guide
HDMI to FMC Module User Guide Rev. 1.0.37-17 September 2015 http://www.exostivlabs.com 1 Table of Contents HMDI to FMC Module...3 Introduction...3 Features...3 Physical Dimensions...4 HDMI Connector...4
A24C02. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION provides 2048 bits of serial electrically erasable and programmable read-only memory (EEPROM), organized as 256 words of 8 bits each. The device is optimized for use in many industrial and
IST8310 Datasheet, Version 1.2
IST830 3D Mag gnetometer Brief Datasheet IST830 Datasheet, ersion.2 Table of Contentss GENERAL DESCRIPTION... 3 2 BLOCK DIAGRAM, PACKAGE DIMENSION AND APPLICATION CIRCUIT... 4 2. Block diagram... 4 2.22
RClamp0551P. Ultra-Low Capacitance 1-Line, 5V ESD protection. PRELIMINARY Features. PROTECTION PRODUCTS - RailClamp Description
- RailClamp Description RailClamp TS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive
XRA BIT I2C/SMBUS GPIO EXPANDER WITH INTEGRATED LEVEL SHIFTERS
SEPTEMBER 2011 REV. 1.0.0 GENERAL DESCRIPTION The XRA1207 is a 16-bit GPIO expander with an I 2 C/ SMBus interface. After power-up, the XRA1207 has internal 100K ohm pull-up resistors on each pin that
FIN1101 LVDS Single Port High Speed Repeater
FIN1101 LVDS Single Port High Speed Repeater General Description This single port repeater is designed for high speed interconnects utilizing Low Voltage Differential Signaling (LVDS) technology. It accepts
0534S PESDR0534S2. 4-Line Low Capacitance TVS Diode Array. Mechanical Characteristics. Description. Applications. Features. Marking Information
4-Line Low Capacitance TVS Diode Array Description The is a low capacitance TVS arrays, utilizing leading monolithic silicon technology to provide fast response time and low ESD clamping voltage, making
Features. Applications
6GHz, 1:4 CML Fanout Buffer/Translator with Internal I/O Termination General Description The is a 2.5V/3.3V precision, high-speed, fully differential 1:4 CML fanout buffer. Optimized to provide four identical
A24C08. AiT Semiconductor Inc. ORDERING INFORMATION
DESCRIPTION The provides 8192 bits of serial electrically erasable and programmable read-only memory (EEPROM), organized as 1024 words of 8 bits each. The device is optimized for use in many industrial
Specification for release
Description: TS Diode rray WE-TS Specification for release Features: B Schematic and Pin Configuration: ESD Protection for 2 high-speed I/O channels and DD Provide ESD protection for each channel to IEC
Specification Status: RELEASED
PAGE NO.: 1 OF 6 Specification Status: RELEASED BENEFITS Low capacitance; provides low insertion loss for high speed data signals Small size ESD protection diodes for high speed data signals (0201 size
19S-117ZUTD/S3353/TR8
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Mono-color type. Pb-free. ESD protection.
XRA1201/1201P 16-BIT I2C/SMBUS GPIO EXPANDER
SEPTEMBER 2011 REV. 1.0.0 GENERAL DESCRIPTION The XRA1201/1201P is a 16-bit GPIO expander with an I 2 C/SMBus interface. After power-up, the XRA1201 has internal 100K ohm pull-up resistors on each pin
WS3210C62 WS3210C62 Over-Voltage Protection Load Switch Descriptions CSP-9L (Bottom View) Pin Configuration (Top View)
Over-Voltage Protection Load Switch http://www.sh-willsemi.com Descriptions The features a low R ON internal High Voltage Switch and an input range of absolute maximum 30V. An internal input clamp is capable
STMLS05 Applications Description Features Table 1: Device summary I2C base Package Order code address marking
Enhanced five-channel PMOS load switches Datasheet - production data Applications Smart phones Tablets Mobile device accessories Wearable devices Features Five-channel PMOS switches Input/output voltage
1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors
1, 2, 4 and 8-Channel Very Low Capacitance ESD Protectors CM1210 Features 1,2,4 and 8 channels of ESD protection Very low loading capacitance (1.0pF typical) ±6 kv ESD protection per channel (IEC 61000-4-2
Si52111-B5/B6 PCI-EXPRESS GEN 3 SINGLE OUTPUT CLOCK GENERATOR. Features. Applications. Description. Functional Block Diagram
PCI-EXPRESS GEN 3 SINGLE OUTPUT CLOCK GENERATOR Features PCI-Express Gen 1, Gen 2, Gen 3, and Gen 4 common clock compliant Gen 3 SRNS Compliant Low power HCSL differential output buffer Supports Serial-ATA
4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source
4-Channel 1-wire Dimming LED Driver with Ultra Low Dropout Current Source FEATURES DESCRITION Ultra low dropout: 50mV/20mA(typical) Support up to 4 LEDs LED sink current up to 20mA ±1% LED current matching(typical)
Specification Status: RELEASED
PAGE NO.: PAGE 1 of 6 Specification Status: RELEASED BENEFITS Industry-leading lowest capacitance; provides lowest insertion loss for high speed data signals Industry s smallest footprint and lowest profile
MPC9817ENR2. Clock Generator for PowerQUICC and PowerPC Microprocessors and Microcontrollers DATA SHEET NRND
Clock Generator for PowerQUICC and PowerPC Microprocessors and Microcontrollers MPC9817 DATA SHEET NRND The MPC9817 is a PLL-based clock generator specifically designed for Freescale Semiconductor Microprocessor