[U]rnrn. JOB COSTING,._; in DIBOL for DEC PDP-11s. D ille M. lnl-co.mp. ut r. u I I. I 2441 Honolulu Avenue. Sample Scr n: and Reports

Size: px
Start display at page:

Download "[U]rnrn. JOB COSTING,._; in DIBOL for DEC PDP-11s. D ille M. lnl-co.mp. ut r. u I I. I 2441 Honolulu Avenue. Sample Scr n: and Reports"

Transcription

1 ... \._),._) [U]rnrn D ille M. lnl-co.mp. t r Honoll Avene... t.n A. 0 Montrose, California ppllcitlon.. lnc. Telephone: (213} Telex: Sample Scr n: and Reports October JOB COSTNG,._; in DBOL for DEC PDP-11s,_; '.._J Job Prge Analyels.,. Job Master List Job Coating Table Llathig.._) -._) Labor by Dept./W.C r- Labor by Job Notta T History._),..,) Material by Job Material by p,pt./w.c. ' Total Coat ' Analysts by Job Report,..,..._ tem Trx edit List L bor Oost Trx Material Coating _)

2 v Sample Screen Formats for Job Costing-DBOL for DEC PDP-11a-Release1 t.._) JOB COSTNG PLEASE SELECT APPLCATON 1. JOB FLE MANTENANCE,_, 2. COST TABLES FLE MANTENANCE 3. JOB COST NG TRANSACT ON ENTRY 4. PR NT JOB COST NG ANALYSS REPORTS 5. PRNT WORK-N-PROCESS REPORTS 6. JOB COST NG SPEC AL FUNCTONS v JOB F LE MA NTENANCE ) PLEASE SELECT APPL CAT ON 1 ADD NEW JOB ( S l 2. CHANGE/NQURE JOBCS) 3. DELETE JOBCS> 4. PNT OUT JOBCS) 5. COMPLETED JOB L ST AND PURGE (_) ANY CHANGE -._; JOB FLE MANTENANCE ADD,ciHANGE,DELETE v 1. JOB NUMBER 2. JOB DESCRPTON x.x 3. QUANT TY ORDERED 8. ORDER SOURCE 4. UNT OF MEASURE 9. RELEASE DATE 5. QTY PRODUCED 10. CREATON DATE XX /XX /XX XX/XX/XX 6. ST.A TUS CODE 11. W/P MATER AL CODE XX 7. JOB TYPE 12. FG MATERAL CODE XX.._) x: ( 1 ) _.! -1-

3 r"" Sample Screen Formats for Job Costlng-DBOL for DEC PDP-11s-'Release1 COST TABLES F LE MA NTENANCE ADD, CHANGE/ NQURE, DELETE,- PLEASE SELECT TABLE XX 1. BURDEN RATES 6. DEPARTMENTS 2. JOB TYPES 3. JOB STATUS CODES 7. LABOR GRADES 8. MATERAL CODES!"""' 4. COST TYPES 9. WORK-N-PROCESS CODES 5. WORK CENTERS 10. FNSHED-GOODS CODES,,...,, ) COST TABLES F LE MA NTENANCE ADD,CHANGE/NQURE,DELETE TABLE NUMBER 1 DEPARTMENT NUMBER 2. WORK CENTER NUMBER 3. FXED BURDEN PER HR 4. VAR BURDEN PER HR 5. FXED BURDEN % LABOR $ x 6. VAR BURDEN% LABOR$ x F ELD TO CHANGE BURDEN RATES 7. FXED BURDEN PER UN T 8. VAR BURDEN PER UNT 9. FX BURDEN G/L ACCT NO 10. VAR BURDEN G/L ACCT NO -x -x r r-1 :) JOB COSTNG TRANSACTON ENTRY PLEASE SELECT APPLCATON A 1. ENTER NEW TRANSACTONS n 2. CHANGE EX ST NG TRANSACTONS 3. DELETE Ex1sq1NG TRANSACTONS 4. PRNT TRANSACTON EDT LST 5. POST TRANSACTONS TO MAN FLE 6. PRNT TRANSACTON HSTORY - -2-

4 (._1 Sample Screen Formats for Job Costing-DBOL for DEC PDP-11s-1Release1 JOB COST NG TRANSACT ON ENTRY ADD, CHANGE/ NQURE, DELETE 1 JOB NUMBER XXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 2. TRX TYPE: XXXXXX ( 1 l 3. RECORD TYPE,..) JOB COSTNG RECORD TYPES: 1 = TEM RECORD 2 = OPERATON RECORD 3 = MATER AL RECORD 4 = NOTE RECORD \_, '<...) JOB COSTNG TRANSACTON ENTRY ADD, CHANGE/ NQU FlE 1 JOB NUMBER XXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 2. TRX TYPE: XXXXXX ( 1 l 3. RECORD TYPE: TEM 4. TEM SEQUENCE 5. TEM NUMBER x 6. QUANTTY ORDERED 7. UNT OF MEASURE 8. QUANT TY.PRODUCED 9. POST TO JOB F ELD TO CHANGE XX 10. TRANSACTON DATE TEM DE SCRPT ON: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ( 2).) JOB COST NG TRANSACT ON ENTRY ADD, CHANGE/ NQURE, DELETE 1 JOB NUMBER XXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 2. TRX TYPE: XXXXXX ( 1 l 3. RECORD TYPE: OPERATON 4. ACTUAL/PLANNED x 11 WORK CENTER 5. TEM SEQUENCE 12. HOURS x 6. TEM NUMBER x 13. EMPLOYEE NO. x 7. OPERATON 14. QUANTTY 18. FXED BURDEN 8. COST TYPE 15. UNT OF MEAS 19. VAR BURDEN 9. LABOR GRADE 1 6. COUNT PO NT x 20. DRECT COST 1 0. DEPARTMENT 1 7. SET-UP x 21. TRX DATE F ELD TO CHANGE x: x x x x x x x x x ( 2) -3-

5 (1 Sample Screen Formats for Job Costing-DBOL for DEC PDP-11s-1Release1 JOB COST NG TRANSACT ON ENTRY ADD, CHANGE/ NQURE, DELETE ('; 1 JOB NUMBER XXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 2. TRX TYPE: XXXXXX C 1 l 3. RECORD TYPE: MATERAL 4. ACTUAL/PLANNED 11 DEPARTMENT 5. TEM SEQUENCE 1 2. WORK CENTER 6. TEM NUMBER x 13. TRX DATE 7. OPERATON 1 4. QUANT TY 15. UNT OF MEAS 8. COST TYPE 1 6. QTY /NO COST 17. MATERAL CODE 9. COMPONENT NO. x 18. COST 10. SUBSTTUTE NO. x 1 9. SOURCE CODE F ELD TO CHANGE XX x: ( 2} """'!"""' ('"-; JOB COST NG TRANSACT ON ENTRY ADD, CHANGE/ NQURE, DELETE 1 JOB NUMBER XXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 2. TRX TYPE: XXXXXX C 1 ) 3. RECORD TYPE: NOTE 4. TEM SEQUENCE 5. TEM NUMBER x 6. OPERATON 7. COST TYPE 8. NOTE SEQUENCE x 9, TRX DATE 1 0. NOTE L NE 1 F ELD TO CHANGE XX '11 NOTE L NE 2 XXXX'X XXXX XXX XXXXXXX X XXXXXXXXXX x: (2) ("'j ('i JOB COST NG TRANSACT ON ENTRY PRNT TRANSACTON EDT LST 1. BEGNNNG TRANSACTON DATE 2. ENDNG TRANSACTON DATE 3. PRNT DELETONS r-"i 4. RECORD TYPE x 1 = TEMS OPERATONS F ELD 11 TO CHANGE MATERALS NOTES ("') -4- r-'\

6 ,._) Sample Screen Formats for Job Costing-DBOL for DEC PDP-11s-Release1 ( EXTRACT TRANSACTONS FOR POST NG (._; PLEASE ENTER: 1. BEGNNNG TRANSACTON DATE XXXXXX 2. ENDNG TRANSACTON DATE 3. PR NT AUD T TRAL OF CHANGES? X \._) F ELD TO CHANGE XX \_.i PRNT WORK-N-PROCESS REPORTS '\ \._.) PLEASE SELECT APPL CAT ON 1. WORK-N-PROCESS BY JOB 2. WORK-N-PROCESS BY DEPT & WC '\.J (_.) PRNT. WORK-N-PROCESS REPORTS WORK- N-PROCESS BY JOB \,.) PLEASE ENTER: 1 BEGNNNG JOB NUMBER 2. ENDJNG JOB NUMBER 3. REPORT NG LEVEL \..) 4. JOB TYPE 5. JOB STATUS CODE x F ELD TO CHANGE XX \_) -5-

7 . Sample Screen Formats for Job Csting;_DBOL for DEC PDP-11s-Release1 PRNT WORK-N-PROCESS REPORTS BY DEPARTMENT AND WORK CENTER :'""! 1 JOB NUMBER 2. DEPARTMENT NUMBER 3. WORK CENTER 4. PR NT WORK CENTER DETAL THRU THRU THRU ("'"') 5. JOB STATUS 6. NCLUDE COMPLETED JOB.S C ncn l? x F ELD TO CHANGE XX ("'"') (" ") PR NT JOB COST NG ANALYSS REPORTS PLEASE SELECT APPLCATON 1 SUMMARY COST ANALYSS BY JOB 2. MATERAL COST ANAUSS BY JOB 3. MATER AL COST ANALYSS BY DEPT AND WORK CENTER 4. LABOR COST ANALYSS BY JOB 5. LABOR COST ANALYSS BY DEPT AND WORK CENTER ("",,("", JOB COST NG SPEC AL FUNCTONS PLEASE SELECT APPL CAT ON 1 JOB COPY FUNCTON ('j 2. FULL JOB MASTER REORGANZATON 3. GENERAL LEDGER NTERFACE 4. ACCOUNTS PAYABLE lnterface 5. COST TABLE DEFAULT CODES MANTENANCE ('j :_5_ r-"1

8 v Sample Screen Formats for Job Costing-DBOL for DEC PDP-11s-1Release1 v JOB COST NG SPEC AL FUNCTONS JOB COPY FUNCTON PLEASE ENTER: 1. OLD JOB NUMBER CCOPY) 2, NEW JOB NUMBER C CREATE TRX > (_; F ELD TO CHANGE XX \._/ JOB COST NG SPEC AL FUNCTONS JOB COPY FUNCTON '.._; The fol lowin transactions were created: TEM TRANSACTONS XXX OPERATON TRANSACTONS XXX MATERAL TRANSACTONS XXX NOTE TRANSACT O.NS XXX \,..) Copy Comp eted. CR TO CONT NUE \_,} JOB COST NG SPEC Al FUNCTONS COST TABLE DE FAUL TS MA NTENANC.E \_) TABLES DEFAULT CODE CODE DESCRPTON 1 FXED BURDEN x 2. VARABLE BURDEN x 3. RAW MATER AL x 4. WORK-N-PROCESS x 5. COST OF GOODS SOLD x 6. LABOR x 7. MATL SSUE/NO COST x PLEASE NOTE:...) The above "DEFAULT" codes mst be va 11 d codes entered throgh COST TABLES F LE MA NTENANCE, Fa 11 re to dent fy these defe t codes wl 11 case npredictable reslts n reports and the processing of nterfaces to or from other applications. F ELD TO CHANGE...) -7-

9 !"""1. Sample Print-Ots for Job Costing-DBOL for DEC PDP-11s-Release1 JOB MASTER L ST JOB MASTER SUMMARY L ST < 1 ) JOB XXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ORDERED: XXX, XXX- SOURCE: XXXXXXXXXX CREA TED: XX/XX/XX STATUS: XXXXXXXXXXXXXXXXXXXXXXXXXXXXX UM: XX COMPLETE: XXX, XXX- TYPE: XXXXXXXXXX RELEASED: XX /XX /XX W P: XX F N-GDS: XX!'""'} TEM: XXXXXXXXXXXXXXX SEQ-NO: XXXX ORDERED: XXX,XXX- RODUCED: XXX,XXX- UM: XX POST TO JOB: OPERATON NO: XX LABOR DEPT: we: HOURS QUANT TY LBR-GDE DR-COST TYPE: XX ACTUAL: x,x.x- x,x- x,x.- PLANNED: x,x.x- x,x- x,x.- FXED-BUR VAR-BUR COUNT-PO NT: X XXX, XXX.XX- SETUP OPER: X x,x.x,x.- x,x.- MATERALS COST-TYPE:XX DEPT:XX WC: XX COMPONENT TEM MAT-CODE:XX UM:XX SOURCE: XXXXXXXXX ACTUAL: XXXXXXXXXXXXXXX PLANNED: XXXXXXXXXXXXXXX QUANT TY COST NOT COSTED x,x- x,x.- x,,x- x,x.- NOTES COST-TYPE: XX 1 XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX 2. x (2) JOB XXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX!""" RUN DATE: XX-XXX-XX TME: XX:XX XM X COMPANY NAME X TERM /XX SEQ llxxx PAGE XXX JOB COST TRANSACTON EDT LST: TEM RECORDS POST JOB TRX REC CODE NUMBER TYPE TYPE TEM SEQ QTY QTY POST TRX TEM NUMBER ORDERED UM PRODUCED TO JOB DATE XXXX XXXXXXXXXXXXXXX XXX, XXX- XX XXX, XXX- XXXX XXXXXXXXXXXXXXX XXX, XXX- XX XXX, XXX- XX/XX/XX XX/XX/XX XX/XX/XX """'\ RUM DATE: XX-XXX-XX T ME: XX: XX XM X COMPANY NAME X TERM /XX SEQ llxxx PAGE XXX J 0 B 0 s T R A N S A C T 0 N DT LST: 0 P E R A T 0 N R E C 0 R D S PST JOB TRX REC ACT/ SEQ TEM CD NO TYP TYP PLN NO NUMBER OP CST LBR DPT LABOR NO TYP COE WC HOURS EMPLOYEE NUMBER ORD UM CNt SET FX/VAR QTY PNT UP BURDEN x x x x x' x. x-x x' x- X XXX,XXX.XX- XXX,XXX.XX- XX/XX/XX DRECT COST TRX DATE x x,x- x,x- x,x. x x x x x' x.x-x x' x- x XXX,XXX.XX- XXX,XXX.XX- XX/XX/XX x 'x. x x 'x. x-x x' x- x XXX,XXX.XX- XXX,XXX.XX- XX/XX/XX x,x.-. RUN DA TE: XX-XXX-XX T ME: XX: XX XM X COMPANY NAME X TERM /XX SEQ /XXX PAGE XXX J 0 B C 0 S T T R A N S A C T 0 N E D T L S T : JOB-NUMBER TRX-TYPE POST-CODE REC-TYPE x x x, x TEM-SEQ-NO. TEM-NUMBER x x x OPERATON COST-TYPE NOTE-SEQ NOTE RECORDS NOTE-LNE-1 NOTE-L NE-2 TRX-DATE XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XX X X /XX x x x x X XXXXXXXXXXXXXXXXXXXXXXXXXXXXX XX /XX/XX x x x x XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XX/XX/XX x x x x,,-.,, r"""1 J 0 B C 0 S T T R A N S A C T 0 N E D T L S T JOB-NUMBER ACTUAL/PLANNED POST-CODE TRX-TYPE REC-TYPE x x x TEM-SEQ-NO TEM-NUMBER x x x OPERATON COST-TYPE M A T E R A L R E C 0 R D S COMPONENT-NO. DPT QUANT TY TRX-DA TE SUB ST TU TE-NO. WC QTY /NO-COST UM MA TL-CODE MA TL-COST SOURCE-CODE x x' x- XX/XX/XX XX XXXXXXXXXX x x 'x- x,x.x x 'x- XX/XX/XX XX XXXXXXXXXX x x 'x- x,x.x x 'x- XX/XX/XX XX XXXXXXXXXX x x' x- x,x.- r-... -a- r-'i

10 '.._) Sample Print-O.ts for Job Costing-DBOL for DEC PDP-11sRelease1 DATE: XX-XXX-XX T ME: XX: XX TERM /XX SEQ /XXX PAGE XXX l._1 SUMMARY COST ANALYS B y J 0 B JOB NUMBER: XXXXXX DESCRPTON: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX QTY ORDERED: XXX,XXX XX STATUS: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX JOB TYPE: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX QTY PRODUCED: XXX,XXX CREATED: XX/XX/XX RELEASED: XX/XX/XX TEM SEQUENCE NUMBER: XXXX TEM NUMBER: XXXXXXXXXXXXXXX QTY ORDERED XXX, XXX XX QTY PRODUCED: XXX, XXX OPEN SHOP ORDERS: XX } \..,.) * OPERATON XX DEPT XX W/C XX, x. -x. x. ' x. -x, x. ' x. -x, x. - TOTALS FOR TEM XXXXXXXXXXXXXXX SEQ: XXXX ACTUAL PLANNED VAR ANCE $ AMOUNT PER - UN T $ - AMOUNT PER - UN T $ - AMOUNT % PER - UN T OPERAT ON TOTAL XXXX,XXX.XX-XXX,XXX.XX-,x.-x,x.,x.-x,x.,x.-x,x., x. -x, x. - XXXX, XXX, XX XXXX, XXX. XX XXXX, XXX. XX XXXX, XXX. XX, x. x.x-x' x. -, x. -x. x. - ' x.. x. -x' x. -, x. -x. x. -, x. - TEM TOTAL x,x.-x,x.- x,x.-x.x.- x,x.- TOTALS FOR JOB XXXXXX, x. ' x. - JOB XXXXXX TOTAL x,x,x.- REPORT TOTALS. x., x. - REPORT TOTAL, x. -,x.,x.- x,x,x.-,x.,x.-,x.-,x.,x.- x,x,x.-,x.,x.-,x.- x x x x- x,x. x,x. x,x. x,x.- x- x,x.x- x,x.-. x- x,x.- x x- x- x x- x- Remarks: AN ASTERSK TO THE LEFT OF THE OPERATON NDCATES THAT THAT OPERATON S A COUNT PONT. 0 RUN DATE: XX-XXX-XX T ME: XX: XX XX x x x x 'TERM /X SEQ /XXX PAGE XXX M A T E R A L COST ANALYSS BY J 0 B '-<_. JOB NUMBER: XXXXXX DES CR PT ON: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX QTY ORDERED: XXX, XXX XX SH TUS: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX QTY PRODUCED: XXX, XXX CREATED: XX /XX /XX RELEASED: XX /XX /XX TEM SEQUENCE NUMBER: XXXX TEM NUMBER: XXXXXXXXXXXXXXX QTY ORDERED XXX,XXX XX QTY PRODUCED: XXX,XXX OPEN SHOP ORDERS: XX ACTUAL PLANNED VARANCES COST TYPE/COMP-TEM AMOUNT QUANTTY COMPONENT-TEM AMOUNT QUANTTY PRCE/SUB % YELD % QUANTTY % TOTAL x x, x. -x' x- x x, x. -x' x- x. x. -x-x' x. -x-x, x. -x-x, x. x x, x. -x, x- x x, x. -x, x- x, x.-x-x, x. -x-x, x. -x-x, x.x XXX, XXX. XX-XXX, XXX- XXXXXXXXXXXXXXX XcXX, XXX. XX-XXX, XXX- XXX, XXX. XX-XXX-XXX, XXX. XX-XXX-XXX, XXX. XX-XXX-XXX, XXX. XX- XXXXXXXXXXXXXXXXXXX x x, x. -x. x- x x. x. -x, x- x, x.-x-x 'x.-x-x, x. -x-x, x. - TEM TOTAL x,x.- x,x.- XXX,XXX.XXx,x.- XXX,XXX.XX- x,x.- x,x.- COST TYPE TOTALS FOR JOB x. x.- JOB TOTAL,x.- x,x.- x,x.- x, x.- \..) DATE: XX-XXX-XX TME: XX:XX x TERM #XX SEQ /XXX PAGE XXX M A T E R A L C 0 S T A N A L Y S S B Y D E P A R T M E N T W 0 R K C E N T E R ACTUAL COST PLANNED COST VARANCES PRCE/SUB % YELD % QUANTTY % TOTAL v DEPARTMENT XX XXXXXXXXXXXXXXXXXXXXXXXXX WORK CENTER XX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX x, x. x. x. x, x. - WORK CENTER XX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX x' x. x' x. - x,x. x,x. x,x.- x 'x. -x-x, x. -x-x' x. -x-x' x. -. x. -x-x' x.-x-x, x.-x-x, x.-. x. -x-x. x. -x-x' x. -x-x' x. - 'x. - x, x. -x-x, x. -x-.x 'x.-x-x. x. -. x.- x' x.-x-x, x.-x-x 'x. -x-x, x.-x- ;; DEPARTMENT XX TOTALS x x x, x. x, x. - x, x. - ' x. -x-x' x. -x-x, x. -x-x, x. - 'x. -. x.-x-x, x. -x-x, x. -x-x, x.-x- DEPARTMENT XX TOTAL x,x.- x,x.- x,x.- ' -9-

11 ,x,x.-,x.,x,x.-,x.,x,x.-,x.l""'j Sample Print-Ots for Job Costing-DBOL for DEC PDP-11s-Release1 RUN DATE: XX-XXX-XX T ME: XX: XX XM COMPANY NAME TERM /XX SEQ llxxx PAGE XXX L A B 0 R C 0 S T A N A L Y S S B Y J 0 B JOB NUMBER: XXXXXX DES CR PT ON: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX QTY ORDERED: XXX, XXX XX STATUS: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX JOB TYPE: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX QTY PRODUCED: XXX,XXX CREATED: XX/XX/XX RELEASED: XX/XX/XX r""'1 TEM SEQUEN,CE NUMBER: XXXX TEM NUMBER: XXXXXXXXXXXXXXX QTY ORDERED XXX, XXX XX QTY PRODUCED: XXX, XXX OPEN SHOP ORDERS: XX * OPERATON: XX DEPT: XX W/C: XX ---- ACTUAL PLANNED :, VAR ANCES HOURS COST HOURS COST - WAGE-RATE % PERFORMANCE % QUANTTY % TOTAL %. x-x 'x. -. x-x' x. - x 'x. -x-x 'x. -x-x 'x.-x-x' x. -x. x-x' x. -.x-x' x. - x 'x. -x-x' x. -x-x 'x. -x-x' x. -x. x-x 'x. -. x-x' x. - x 'x. -x-x' x. -x-x' x. -x-x' x. -x OPERAT ON TOTAL XXXX.X-XXX, XXX. XX-XXXX.X-XXX, XXX. XX- XXX, XXX. XX-XXX-XXX, XXX.XX-XXX-XXX, XXX, XX-XXX-XXX, XXX. XX-XXX- r""" OPERAT 10N: XX DEPT: XX W/C: XX.,x-x' x. -. x-x' x :- TOTALS FOR TEM XXXXXXXXX.XXXXXXXXXXXXXXXXXXXXX XXXX. X-XXX, XXX. XX-XXXX. X-XXX, XXX ;XX- XXX, XXX. XX-XXX-XXX, XXX. XX-XXX-XXX, XXX. XX-XXX-XXX, XXX. XX-XXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXX.X-XXX, XXX. XX-XXXX. X-XXX, XXX. XX- XXX, XXX. XX-XXX-XXX, XXX. XX -XXX-XXX, XXX.XX-XXX-XXX, XXX. XX-XXX- TEM TOTAL. x-x' x. -. x-x' x. - x' x. -x-x' x. -x-x' x. -x-x' x. -x- JOB TOTALS.x x,x.- x,x.- x,x.- ti JOB TOTAL x,x.- x.x.- x,x.- DATE: XX-XXX-XX TME: XX:XX!""') LABOR COST ANALYSS BY DEPARTMENT AND WORK CENTER DEPARTMENT XX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ACTUAL PLANNED VARANCES HOURS DRECT COST HOURS DRECT COST WAGE-RATE -% PERFORMANCE QUANTTY TOTAL WORK CENTER XX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX. x-x. x..x-x.x.-. x-x. x. DEPARTMENT XX TOTALS x x FNAL TOTAL FOR DEPARTMENT XX x.x.x.x.- x.x.- -x-x,x.- x,x.-x-x,x.-x-x,x.-x-x,x.-x-x-x, x. - x,x.-x-x,x.-x-x,x.-x-x,x.-x- -x-x 'x. - x. x. -x-x' x. -x-x 'x. -x-x. x. -x x,x.-x x,x.-x- x,x.-x- t"'i r-'\ RUN DATE: XX-XXX-XX TME: XX:XX XM X COMPANY NAME X TERM /XX SEQ llxxx PAGE XXX W 0 R K - N - P R 0 C E S S B Y J 0 B QUANTTY ACTUAL $ AMOUNT $ PER UN T QUANT TY PLANNED $ AMOUNT $ PER UN T JOB XXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX TEM XXXX SEO XXXX x..x TOTALS FOR TEM OPERATON XX DEPT XX WORK CENTER XX X.XX,XXX x x x x x x x x x x x x OPERATON XX TOTALS OPERATON XX DEPT XX WORK CENTER XX XXX,XXX x x x x OPERATON XX TOTALS,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.- x.x x.x x.x,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.-,x.,x,x.- XX,XKX.XX,x,x.-,x.-.1""1!""' r-. x,x. x,x.- x,x ,-,

12 ,,._) Sample Print-Ots for Job Costing-DBOL for DEC PDP-11 s-release 1 RUN DATE: XX-XXX-XX T ME: XX: XX XM X COMPANY NAME X TERM #XX WORK-N-PROCESS BY DEPT w c ACTUAL AMOUNT PLANNED AMOUNT DEPARTMENT XX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX SEO #XXX PAGE XXX \...,;' WORK CENTER XXXXXXXXXXXXXXXXXXXXXXXXXXXXXX WORK CENTER TOTALS: DEPARTMENT XX TOTALS: x,x,x. x,x,x. x,x,x. x,x,x. x,x,x. x,x,x. x,x,x. x,x,x. x,x,x. x,x,x. x,x,x. x,x,x. REPORT TOTALS: TOT AL XXXXXXXXXXXXXXXXXX XX X XXX XX XXXX TOT AL XXXXXXXXXXXXXX XXXXXXXXXXXXX XXX x,x,x. x,x,x. x,x,x. x,x,x. v REPORT GRAND TOTALS x,x,x. x,x,x.,,_.' '._./ "-' '._./ v - '...,/ -11--

[U] rn rnfilr Mini-Computer

[U] rn rnfilr Mini-Computer v [U] rn rnfilr Mini-Compter D Bsiness Applications, Inc. I 2441 Honoll Avene 8 Montrose, California 91020 Telephone: (213) 957-2900 Telex: 194188 Sample Screens and Reports March 1982 i._i - BASE MATERIAL

More information

I_; [U]rnUJilI. Sample Screens & Reports April BILL OF MATERIALS PROCESSOR in DIBOL: ._! ,.,.; ...; ...) ,.,.; Indented Where-used ...,) ..

I_; [U]rnUJilI. Sample Screens & Reports April BILL OF MATERIALS PROCESSOR in DIBOL: ._! ,.,.; ...; ...) ,.,.; Indented Where-used ...,) .. I_; v [U]rnUJilI Sample Screens & Reports April 1981 ~ BILL OF MATERIALS PROCESSOR in DIBOL: ~._!,.,.;...;...),.,.; Indented Where-used...,).._,,' v. Sample Screen Formats for Bill of Mateilal Processor-DIBOL

More information

SERIAL NUMBERS DOCUMENTATION UPDATES

SERIAL NUMBERS DOCUMENTATION UPDATES DOCUMENTATION UPDATES Date Description Where Changed 03/28/00 Several places in the manual previously indicated to access the item browse to browse for a specific location. The text now indicates to access

More information

Bit level Binaries and Generalized Comprehensions in Erlang. Per Gustafsson and Kostis Sagonas Dept of Information Technology Uppsala University

Bit level Binaries and Generalized Comprehensions in Erlang. Per Gustafsson and Kostis Sagonas Dept of Information Technology Uppsala University Bit level Binaries and Generalized Comprehensions in Erlang Per Gustafsson and Kostis Sagonas Dept of Information Technology Uppsala University Binaries as we know them Introduced in 1992 as a container

More information

Table II-1 Challenges in China s seeds, crops and grains in the next five years

Table II-1 Challenges in China s seeds, crops and grains in the next five years II Seeds, crops and grains situation in China Table II-1 Challenges in China s seeds, crops and grains in the next five years N Challenges Reason o. 1 xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

More information

Packaging and labelling

Packaging and labelling QRDvet template, opportunities for reduced label text and multi-lingual labels, recent examples EMA/IFAH-Europe Info Day 2014 Presented by: Jóhann M. Lenharðsson CVMP member (IS) An agency of the European

More information

--iiiiiii. - -iiiiii. -iiiiiiii CHARLES L NEAL 522 S SCHODAC RD MANSFIELD PA KPYALTY OWNER RELATIONS P.p. BOX 576 HOUSTON, TX

--iiiiiii. - -iiiiii. -iiiiiiii CHARLES L NEAL 522 S SCHODAC RD MANSFIELD PA KPYALTY OWNER RELATIONS P.p. BOX 576 HOUSTON, TX KPYALTY RELATONS P.p. BOX 576 HOUSTON, TX 77001 0576 iiiiii iiiiii CHECK DATE : 05/23/2014 522 S SCHODAC RD MANSFELD PA 169339321 CHECK NO. 0001017473 Page 1 of 12 iiiiiiii FOR THE ACCOUNT OF: MONTHLY

More information

MATH 104B OCTAL, BINARY, AND HEXADECIMALS NUMBERS

MATH 104B OCTAL, BINARY, AND HEXADECIMALS NUMBERS MATH 104B OCTAL, BINARY, AND HEXADECIMALS NUMBERS A: Review: Decimal or Base Ten Numbers When we see a number like 2,578 we know the 2 counts for more than the 7, even though 7 is a larger number than

More information

UM PCA9698 demonstration board OM6281. Rev September Document information

UM PCA9698 demonstration board OM6281. Rev September Document information Rev. 0 4 September 008 User manual Document information Info Keywords Abstract Content IC, PCA9698, GPIO The OM68 is an add-on to NXP s I C 005- demo board. This daughter board makes it easy to test and

More information

Completing Business Messages. Prentice Hall, 2008 Business Communication Today, 9e Chapter 6-1

Completing Business Messages. Prentice Hall, 2008 Business Communication Today, 9e Chapter 6-1 Completing Business Messages Prentice Hall, 2008 Business Communication Today, 9e Chapter 6-1 Three-Step Writing Process Planning Writing Completing Analyze Situation Gather Information Adapt to the Audience

More information

DOCUMENTATION CONVENTIONS

DOCUMENTATION CONVENTIONS QUOTATION HISTORY The documentation in this publication is provided pursuant to a Sales and Licensing Contract for the Prophet 21 System entered into by and between Prophet 21 and the Purchaser to whom

More information

A. PE1676/A submission from the Scottish Government of 6th March 2018 unsigned**, - and

A. PE1676/A submission from the Scottish Government of 6th March 2018 unsigned**, - and PE1676/C Petitioner submission of 15 March 2018 Thank you for expressing your support for my petition and other supporting statements expressed at the Committee Meeting 1st February 2018. As of the 7th

More information

TURN & EARN BY BUYER

TURN & EARN BY BUYER TURN & EARN BY BUYER The documentation in this publication is provided pursuant to a Sales and Licensing Contract for the Prophet 21 System entered into by and between Prophet 21 and the Purchaser to whom

More information

Voyager Mobile Entry Plus. (VME Plus) Installer Manual

Voyager Mobile Entry Plus. (VME Plus) Installer Manual Voyager - 50 Mobile Entry Plus (VME Plus) Installer Manual Device Telephone Number: 1 Installation Steps 1. If there is a SIM installed in the GSM device skip to step 3. 2. If there is no SIM installed

More information

Emil Saucan EE Department, Technion

Emil Saucan EE Department, Technion Curvature Estimation over Smooth Polygonal Meshes Using The Half Tube Formula Emil Saucan EE Department, Technion Joint work with Gershon Elber and Ronen Lev. Mathematics of Surfaces XII Sheffield September

More information

NEW TOOLBOX FUNCTION: Payroll Earnings Category Renumber

NEW TOOLBOX FUNCTION: Payroll Earnings Category Renumber NEW TOOLBOX FUNCTION: Modules Affected: Versions Affected: Payroll, Accounts Payable, Billing, General Ledger, Job Status, Human Resource Suite Version 7 (9.7c2.25 and greater) The discussion of this new

More information

FORMATTING GUIDELINES These guidelines are designed for Microsoft Word or a similar word processing program.

FORMATTING GUIDELINES These guidelines are designed for Microsoft Word or a similar word processing program. FORMATTING GUIDELINES These guidelines are designed for Microsoft Word or a similar word processing program. Cover Page Your play should have standard one-inch margins. If your submission is bound, you

More information

Lobachevsky State University of Nizhni Novgorod. Polyhedron. Quick Start Guide

Lobachevsky State University of Nizhni Novgorod. Polyhedron. Quick Start Guide Lobachevsky State Unversty of Nzhn Novgorod Polyhedron Quck Start Gude Nzhn Novgorod 2016 Contents Specfcaton of Polyhedron software... 3 Theoretcal background... 4 1. Interface of Polyhedron... 6 1.1.

More information

INSTRUCTION MANUAL CTXD-30-H CONTROLLER FOR AISG TYPE ADJUSTABLE DOWNTILT ANTENNAS

INSTRUCTION MANUAL CTXD-30-H CONTROLLER FOR AISG TYPE ADJUSTABLE DOWNTILT ANTENNAS INSTRUCTION MANUAL CTXD-30-H CONTROLLER FOR AISG TYPE ADJUSTABLE DOWNTILT ANTENNAS Designed and Manufactured by DOCUMENT A178-6005RevC. PAGE 1 OF 18 REVISION STATUS Rev Changes Date A Release 20 Feb 06

More information

C E R T I F I C A T E O F C O M P L I A N C E

C E R T I F I C A T E O F C O M P L I A N C E Issued to: GE LIGHTING SOLUTIONS L L C BLDG 338E 1975 NOBLE RD EAST CLEVELAND OH 44112 This is to certify that representative samples of COMPONENT - SIGN ACCESSORIES See addendum pages Have been investigated

More information

Following are the ALM packages currently supported by the CU*BASE downloads. McQueeen by McQueen Financial Group. CUPRO by CUNA Mutual Group

Following are the ALM packages currently supported by the CU*BASE downloads. McQueeen by McQueen Financial Group. CUPRO by CUNA Mutual Group ALM Downloads Downloading CU*BASE Member Data to Your Credit Union s Asset/Liability Management Software INTRODUCTION If your credit union uses a third-party Asset/Liability Management tool, CU*BASE has

More information

ph/water Quality Meter F-7X High-spec Command Reference

ph/water Quality Meter F-7X High-spec Command Reference CODE:GZ0000438936 February, 2016 ph/water Quality Meter F-7X High-spec Command Reference 2016 HORIBA, Ltd. Preface This manual describes the communication command list of the ph/water Quality Meters with

More information

MONITORING AND RESEARCH DEPARTMENT

MONITORING AND RESEARCH DEPARTMENT MONITORING AND RESEARCH DEPARTMENT REPORT NO. 09-34 CALUMET EAST SOLIDS MANAGEMENT AREA MONITORING REPORT FIRST QUARTER 2009 MAY 2009 May 18, 2009 Mr. S. lan Keller, P.E. Manager, Permit Section Illinois

More information

Recursion Examples. Factorial Recursive: Factorial Iterative: #include <iostream> using namespace std; long fact(long n) { if (n == 1) return 1;

Recursion Examples. Factorial Recursive: Factorial Iterative: #include <iostream> using namespace std; long fact(long n) { if (n == 1) return 1; Recursion Examples Factorial Recursive: long fact(long n) if (n == 1) return 1; return n*fact(n-1); int main() long n; cout > n; cout

More information

Analyzing the Software Development Life-Cycle using Data-Mining Techniques

Analyzing the Software Development Life-Cycle using Data-Mining Techniques Analyzing the Software Development Life-Cycle using Data-Mining Techniques OpenTech Andreas Platschek February 3, 2017 c Andreas Platschek (OpenTech) February 3, 2017 1

More information

The Data Analysis Module

The Data Analysis Module The Data Analysis Module This module allows you to analyze the data collected, using any of the 5 types of analysis functions available in w-ebass, namely: Molar Analysis Ecobehavioral Analysis Profile

More information

Official Use Only. Lesley Nelson-Burns Office of Quality Management (301)

Official Use Only. Lesley Nelson-Burns Office of Quality Management (301) Official Use Only Lesley Nelson-Burns Office of Quality Management (301) 903-4861 Lesley.nelson-burns@hq.doe.gov 1 Why Official Use Only? D D D Consolidates most CUI information within DOE Includes unclassified

More information

PCAL9535A. 1. General description. Low-voltage 16-bit I 2 C-bus I/O port with interrupt and Agile I/O

PCAL9535A. 1. General description. Low-voltage 16-bit I 2 C-bus I/O port with interrupt and Agile I/O Rev. 2 23 January 2015 Product data sheet 1. General description The is a low-voltage 16-bit General Purpose Input/Output (GPIO) expander with interrupt and reset for I 2 C-bus/SMBus applications. NXP

More information

Line Mode: Digitizer outputs coordinate data points when a button is down; plus one when the button is released.

Line Mode: Digitizer outputs coordinate data points when a button is down; plus one when the button is released. Power Up Default Format # Run mode 9 8 none lines per inch and point per second Operating Modes Run Mode: Digitizer outputs coordinate data continuously. Track Mode: Digitizer outputs coordinate data when

More information

The device powers on with weak pull-up resistors enabled that can replace external components.

The device powers on with weak pull-up resistors enabled that can replace external components. Low-voltage 16-bit I 2 C-bus GPIO with Agile I/O, interrupt and weak pull-up Rev. 2 19 December 2014 Product data sheet 1. General description The is a low-voltage 16-bit General Purpose Input/Output (GPIO)

More information

JANUARY 2019 TICKET FORMAT CHANGES VERSION /28/18

JANUARY 2019 TICKET FORMAT CHANGES VERSION /28/18 JANUARY 2019 TICKET FORMAT CHANGES VERSION 3.1 11/28/18 Donna J. Williams and Juliet Pishinsky PENNSYLVANIA ONE CALL SYSTEM, INC. PROPRIETARY 0 Contents EXHIBIT #1 PARSER REVISIONS, TICKET TYPES AND FORMAT

More information

Properties of Subsets

Properties of Subsets FORMALIZED MATHEMATICS Number 1, January 1990 Université Catholique de Louvain Properties of Subsets Zinaida Trybulec 1 Warsaw University Bia lystok Summary. The text includes theorems concerning properties

More information

IP Camera Configuration Software Instruction Manual

IP Camera Configuration Software Instruction Manual IP Camera 9483 - Confguraton Software Instructon Manual VBD 612-4 (10.14) Dear Customer, Wth your purchase of ths IP Camera, you have chosen a qualty product manufactured by RADEMACHER. Thank you for the

More information

Chapter 57 The TREE Procedure. Chapter Table of Contents

Chapter 57 The TREE Procedure. Chapter Table of Contents Chapter 57 The TREE Procedure Chapter Table of Contents OVERVIEW...3127 GETTING STARTED...3127 SYNTAX...3133 PROCTREEStatement...3133 BYStatement...3140 COPYStatement...3140 FREQStatement...3140 HEIGHTStatement...3141

More information

TitleA Program for Plotting Histograms "

TitleA Program for Plotting Histograms TitleA Program for Plotting Histograms " Author(s) Noguchi, Seishi; Matsuki, Seishi Citation Bulletin of the Institute for Chemi University (1978), 56(1): 39-46 Issue Date 1978-03-31 URL http://hdl.handle.net/2433/76762

More information

Q-Series Sensor Recall

Q-Series Sensor Recall Q-Series Sensor Recall Customer/Branch Name: Contact Name: Contact : Branch Offices Only - for Material Return> Plant: Customer ID (VAP / Installer only): Contact Email: Storage Location: Job Name: Job/Service

More information

CHAPTER ONE. The Writing Process COPYRIGHTED MATERIAL

CHAPTER ONE. The Writing Process COPYRIGHTED MATERIAL CHAPTER ONE The Writing Process Successful communication is three-tiered: visual, verbal, and written. All firms, but particularly design firms, give considerable thought to the visual image and design

More information

News. Recap: While Loop Example. Reading. Recap: Do Loop Example. Recap: For Loop Example

News. Recap: While Loop Example. Reading. Recap: Do Loop Example. Recap: For Loop Example Unversty of Brtsh Columba CPSC, Intro to Computaton Jan-Apr Tamara Munzner News Assgnment correctons to ASCIIArtste.java posted defntely read WebCT bboards Arrays Lecture, Tue Feb based on sldes by Kurt

More information

Transmission Price Control Review Technical Advice on Supply & Demand Forecasting And Forecast Capex

Transmission Price Control Review Technical Advice on Supply & Demand Forecasting And Forecast Capex Transmission Price Control Review 2007-2011 Technical Advice on Supply & Demand Forecasting And Forecast Capex Final Draft Report Issue 5 12 th October 2006 List of Revisions Version Date Pages Affected

More information

UM UBA2025 CFL 23 W, 230 V and 120 V demo board. Document information

UM UBA2025 CFL 23 W, 230 V and 120 V demo board. Document information Rev. 1 26 April 2011 User manual Document information Info Keywords Abstract Content UBA2025, CFL, half-bridge, demo board This user manual describes the CFL 23 W, 230 V and 120 V demo board using the

More information

Claim Status Inquiry USER GUIDE

Claim Status Inquiry USER GUIDE Claim Status Inquiry USER GUIDE DME MAC Jurisdiction B July 2016 Table of Contents Introduction Overview of Claim Status Inquiry (CSI) 3 Enrollment 3 Sign On 4 Navigating Through CSI 6 Claim Status Inquiry

More information

Priority queues and heaps Professors Clark F. Olson and Carol Zander

Priority queues and heaps Professors Clark F. Olson and Carol Zander Prorty queues and eaps Professors Clark F. Olson and Carol Zander Prorty queues A common abstract data type (ADT) n computer scence s te prorty queue. As you mgt expect from te name, eac tem n te prorty

More information

PROGRAMMING MANUAL ELECTRONIC CASH REGISTER MODEL XE-A113. (For V version) LEAD-FREE SOLDER MODEL LEAD-FREE SOLDER

PROGRAMMING MANUAL ELECTRONIC CASH REGISTER MODEL XE-A113. (For V version) LEAD-FREE SOLDER MODEL LEAD-FREE SOLDER PROGRAMMING MANUAL CODE : ZXEA113VPME LEAD-FREE SOLDER MODEL ELECTRONIC CASH REGIER MODEL XE-A113 (For V version) CONTENTS LEAD-FREE SOLDER CHAPTER 1. MAER RESET AND PROGRAM RESET...... 1-1 CHAPTER 2.

More information

Low-voltage translating 16-bit I 2 C-bus/SMBus I/O expander with interrupt output, reset, and configuration registers

Low-voltage translating 16-bit I 2 C-bus/SMBus I/O expander with interrupt output, reset, and configuration registers with interrupt output, reset, and configuration registers Rev. 6.2 7 April 2017 Product data sheet 1. General description The is a 16-bit general-purpose I/O expander that provides remote I/O expansion

More information

TECHNIQUE OF FORMATION HOMOGENEOUS SAMPLE SAME OBJECTS. Muradaliyev A.Z.

TECHNIQUE OF FORMATION HOMOGENEOUS SAMPLE SAME OBJECTS. Muradaliyev A.Z. TECHNIQUE OF FORMATION HOMOGENEOUS SAMPLE SAME OBJECTS Muradalyev AZ Azerbajan Scentfc-Research and Desgn-Prospectng Insttute of Energetc AZ1012, Ave HZardab-94 E-mal:aydn_murad@yahoocom Importance of

More information

kccvoip.com basic voip training NAT/PAT extract 2008

kccvoip.com basic voip training NAT/PAT extract 2008 kccvop.com basc vop tranng NAT/PAT extract 28 As we have seen n the prevous sldes, SIP and H2 both use addressng nsde ther packets to rely nformaton. Thnk of an envelope where we place the addresses of

More information

PPS Requirements. Performance Evaluation Code

PPS Requirements. Performance Evaluation Code PPS Requirements Performance Evaluation Code Final March 14, 2002 Revised May 2, 2002 Information Systems & Computing Office of the President University of California Table of Contents Background... 3

More information

Programming in Fortran 90 : 2017/2018

Programming in Fortran 90 : 2017/2018 Programmng n Fortran 90 : 2017/2018 Programmng n Fortran 90 : 2017/2018 Exercse 1 : Evaluaton of functon dependng on nput Wrte a program who evaluate the functon f (x,y) for any two user specfed values

More information

DLK Pro the all-rounder for mobile data downloading. Tailor-made for various requirements.

DLK Pro the all-rounder for mobile data downloading. Tailor-made for various requirements. DLK Pro the all-rounder for moble data downloadng Talor-made for varous requrements www.dtco.vdo.com Smply brllant, brllantly smple Always the rght soluton The DLK Pro s the VDO product famly, whch sets

More information

TODAY R O U T T C O U N T Y S D A I L Y N E W S P A P E R SKI TOWN USA SNOW REPORT. Steamboat Ski Area Total snow Trails open Lifts open Conditions

TODAY R O U T T C O U N T Y S D A I L Y N E W S P A P E R SKI TOWN USA SNOW REPORT. Steamboat Ski Area Total snow Trails open Lifts open Conditions XXXDAY MONTH XX, 2008 Steamboat Springs, Colorado Vol. 20, No. XX S T E A M B O A T TODAY R O U T T C O U N T Y S D A I L Y N E W S P A P E R FREE X X X Xxx Xxx Xxx Xxxxxx xxxxx xxxxxxx xxxxxxx xxxxxx

More information

Filling level and Temperature Sensor HFT C4 / R / MD

Filling level and Temperature Sensor HFT C4 / R / MD Fllng level and Temperature Sensor HFT C4 / R / MD Level measurng range 0.25-5.0 m Pressure measurng range 0-0.5 bar Temperature measurng range -10 100 C Voltage supply 18 30 V DC Features Fllng level

More information

Tatil Motor Claim Request

Tatil Motor Claim Request Tatil Motor Request Wireframe Version 1 20.05.2014 Home About Us Product Request Support QUOTE CLAIM RENEWAL CLOSE Find more >> Find more >> Find more >> Find more News & Media Contact Us Back Request

More information

Every Toastmaster s First Stop for Advice and Resources HOW TO FILE YOUR CLUB S IRS 990 N FORM

Every Toastmaster s First Stop for Advice and Resources HOW TO FILE YOUR CLUB S IRS 990 N FORM SIMPLE STEP-BY-STEP INSTRUCTIONS FOR FILING THE IRS 990-N POSTCARD ALL CLUBS are REQUIRED to submit the Postcard by May 15 th of each year. There are Many Steps But They Are Simple Steps Follow the instructions

More information

Simulation: Solving Dynamic Models ABE 5646 Week 11 Chapter 2, Spring 2010

Simulation: Solving Dynamic Models ABE 5646 Week 11 Chapter 2, Spring 2010 Smulaton: Solvng Dynamc Models ABE 5646 Week Chapter 2, Sprng 200 Week Descrpton Readng Materal Mar 5- Mar 9 Evaluatng [Crop] Models Comparng a model wth data - Graphcal, errors - Measures of agreement

More information

CONIFER VALUE BASED CARE Cap Connect User Guide

CONIFER VALUE BASED CARE Cap Connect User Guide CONIFER VALUE BASED CARE Cap Connect User Guide Table of Contents New User Registration... 1 The Home Tab... 2 Member Data... 2 New Members... 2 New /Recent Hospitalizations... 2 Members with CCS... 2

More information

How to use Confirmfast.com AUDIT CLIENT S USER MANUAL

How to use Confirmfast.com AUDIT CLIENT S USER MANUAL How to use Confirmfast.com AUDIT CLIENT S USER MANUAL Step 1 - Registration Process: The Auditor will first add your Firm as his Audit Client, and then add the contact details of the Client Administrator.

More information

VRT012 User s guide V0.1. Address: Žirmūnų g. 27, Vilnius LT-09105, Phone: (370-5) , Fax: (370-5) ,

VRT012 User s guide V0.1. Address: Žirmūnų g. 27, Vilnius LT-09105, Phone: (370-5) , Fax: (370-5) , VRT012 User s gude V0.1 Thank you for purchasng our product. We hope ths user-frendly devce wll be helpful n realsng your deas and brngng comfort to your lfe. Please take few mnutes to read ths manual

More information

lecture 21: NetPlumber 5590: software defined networking anduo wang, Temple University TTLMAN 401B, R 17:30-20:00

lecture 21: NetPlumber 5590: software defined networking anduo wang, Temple University TTLMAN 401B, R 17:30-20:00 lecture 21: NetPlumber 5590: software defined networking anduo wang, Temple University TTLMAN 401B, R 17:30-20:00 HSA 2 HSA pro - protocol agnostic, not restricted to existing protocols -statically verify

More information

3 Beginning the Accounting Cycle

3 Beginning the Accounting Cycle Solutions Manual College Accounting A Practical Approach 13th Edition Slater Instantly completed downloadable package SOLUTIONS MANUAL for College Accounting: A Practical Approach 13th Edition by Jeffrey

More information

Master Setup. 4. How to a. Default Settings i. From the home tab, begin typing Master Setup. In the list populated below select WT2 Master Setup

Master Setup. 4. How to a. Default Settings i. From the home tab, begin typing Master Setup. In the list populated below select WT2 Master Setup Master Setup 1. Terminology a. Data Areas Data Areas are ways for Tenmast to separate out the program for program function and PIC submission. Common data areas that you would see are EXE which holds the

More information

Page 1 of 10 Title: Patch 9D Run User-Defined Report Reload Print Report: Info Sheet Report 10/08/2012 16:43:58 Query: Info Sheet Patch 9D Count: 56 Select: Choose Selection Set Transition CR ID Module

More information

OFAC Monitoring Interface

OFAC Monitoring Interface PS_OFAC Application 4759 Extension ID: 2662785c-0f5c-4ba0-9ace-0ca4218943cf OFAC Monitoring Interface 2008-2017, Inc. or its affiliates. All rights reserved. This work is confidential and its use is strictly

More information

High level vs Low Level. What is a Computer Program? What does gcc do for you? Program = Instructions + Data. Basic Computer Organization

High level vs Low Level. What is a Computer Program? What does gcc do for you? Program = Instructions + Data. Basic Computer Organization What s a Computer Program? Descrpton of algorthms and data structures to acheve a specfc ojectve Could e done n any language, even a natural language lke Englsh Programmng language: A Standard notaton

More information

Cache Memories. Lecture 14 Cache Memories. Inserting an L1 Cache Between the CPU and Main Memory. General Org of a Cache Memory

Cache Memories. Lecture 14 Cache Memories. Inserting an L1 Cache Between the CPU and Main Memory. General Org of a Cache Memory Topcs Lecture 4 Cache Memores Generc cache memory organzaton Drect mapped caches Set assocate caches Impact of caches on performance Cache Memores Cache memores are small, fast SRAM-based memores managed

More information

Alufix Expert D Design Software #85344

Alufix Expert D Design Software #85344 238 ALUFIX SOFTWARE Alufx Expert 2014 3D Desgn Software #85344 Alufx Expert software makes automatc desgns for fxtures wth correspondng partlsts. You choose the system and defne clampng ponts. The software

More information

OPL: a modelling language

OPL: a modelling language OPL: a modellng language Carlo Mannno (from OPL reference manual) Unversty of Oslo, INF-MAT60 - Autumn 00 (Mathematcal optmzaton) ILOG Optmzaton Programmng Language OPL s an Optmzaton Programmng Language

More information

v- * 8'-0' [2400] 6'-0' 12' [1800] 300 * 4'[1200] MINIMUM MAY BE USED ON NON INTERSTATE ROUTES * * 24"[600] MAX SPACING BETWEEN BARRICADES

v- * 8'-0' [2400] 6'-0' 12' [1800] 300 * 4'[1200] MINIMUM MAY BE USED ON NON INTERSTATE ROUTES * * 24[600] MAX SPACING BETWEEN BARRICADES WC4 BARRCADE BLACK ON RETRO REFLECTVE WHTE SHEETNG l** ROAD CLOSED WC4 BARRCADE RETROREFLECTVE ORANGE SHEETNG RETROREFLECTVE WHTE SHEETNG FRONT VEW WC3 BARRCADE MOUNT SGNS ON BARRCADES AS SHOWN 12' [3

More information

PCA General description. 2-to-1 I 2 C-bus master selector with interrupt logic and reset

PCA General description. 2-to-1 I 2 C-bus master selector with interrupt logic and reset Rev. 7.1 24 June 2015 Product data sheet 1. General description The is a 2-to-1 I 2 C-bus master selector designed for high reliability dual master I 2 C-bus applications where system operation is required,

More information

ELECTRONIC DATA INTERCHANGE (EDI) IMPLEMENTATION GUIDE PHASE 1 VERSION AIAG TRANSACTION SETS 830 & 997

ELECTRONIC DATA INTERCHANGE (EDI) IMPLEMENTATION GUIDE PHASE 1 VERSION AIAG TRANSACTION SETS 830 & 997 ELECTRONIC INTERCHANGE (EDI) IMPLEMENTATION GUIDE PHASE 1 VERSION 003060AIAG TRANSACTION S 830 & 997 Version 003060AIAG TABLE CONTENTS Page No. EDI OVERVIEW... 1 CONTACTS... 3 IMPLEMENTATION PROCESS...

More information

BW Unicode R/3 MDMP. Product Management Global Solutions International Development, SAP AG. Product Management BI, SAP AG

BW Unicode R/3 MDMP. Product Management Global Solutions International Development, SAP AG. Product Management BI, SAP AG BW Unicode R/3 MDMP Example to extract customer master data from a mixed code page system into a Unicode system Product Management Global Solutions International Development, SAP AG Product Management

More information

Modeling Local Uncertainty accounting for Uncertainty in the Data

Modeling Local Uncertainty accounting for Uncertainty in the Data Modelng Local Uncertanty accontng for Uncertanty n the Data Olena Babak and Clayton V Detsch Consder the problem of estmaton at an nsampled locaton sng srrondng samples The standard approach to ths problem

More information

HBB04P RUN CONTROL REPORT

HBB04P RUN CONTROL REPORT HBB04P RUN CONTROL REPORT This job will produce a Run Control report. The selection criteria must be provided on the parameter card. You need to specify the criteria for the report. These are specified

More information

Overview. Suggestions for use

Overview. Suggestions for use Overview Level Tables Questions Operations,2,, x 2,2,, x,2,,,, x,2,,,, x,2,,,,,, x,2,,,,,, x,2,,,,,,,, x,2,,,,,,,, x - x - x - x Extension levels - (multiples of & ) x - (multiples of & ) x - (decimals)

More information

Greedy Technique - Definition

Greedy Technique - Definition Greedy Technque Greedy Technque - Defnton The greedy method s a general algorthm desgn paradgm, bult on the follong elements: confguratons: dfferent choces, collectons, or values to fnd objectve functon:

More information

Cl. Cl. ..., V, V, -I..., - QJ d.

Cl. Cl. ..., V, V, -I..., - QJ d. )> Cl. Cl...., m V, V, -I..., QJ :J V, - QJ d. 0 :J Main Points Address Translation Concept - How do we convert a virtual address to a physical address? Flexible Address Translation I R. lz G.z: f1..t:?z:.mo/2_'-(

More information

UAB GA End User Project Status Inquiry Task Status

UAB GA End User Project Status Inquiry Task Status Detailed budget, actual, and commitment information can be reviewed by task by using the TASK STATUS button. Invoice detail can also be reviewed through this option. 1. From the PROJECT STATUS window,

More information

REPORTS NOW ACCESSING AND NAVIGATING

REPORTS NOW ACCESSING AND NAVIGATING The purpose of this document is to illustrate how to access and navigate in Reports Now as a Reviewer. Reviewers do not have access to design reports, but they can run reports that have been published

More information

Shop Floor Data Collection

Shop Floor Data Collection Shop Floor Data Collection Prepared by Dr. Don Maes Mascidon LLC November 2012 Shop Floor Maintenance Page 1 Table of Contents Shop Floor Data Collection... 3 Figure 1.1 Processing Shop Floor Transactions...

More information

ADMIN TRAINING GUIDE FEBRUARY 22, 2017 STAFFING SYSTEM NIGHT OWL PRODUCTIONS ENTERPRISE SYSTEMS & SERVICES KENNESAW STATE UNIVERSITY

ADMIN TRAINING GUIDE FEBRUARY 22, 2017 STAFFING SYSTEM NIGHT OWL PRODUCTIONS ENTERPRISE SYSTEMS & SERVICES KENNESAW STATE UNIVERSITY ADMIN TRAINING GUIDE FEBRUARY 22, 2017 STAFFING SYSTEM NIGHT OWL PRODUCTIONS ENTERPRISE SYSTEMS & SERVICES KENNESAW STATE UNIVERSITY Table of Contents Welcome to Night Owl Produc ons!... 3 Accessing Night

More information

PCA9555A. 1. General description. Low-voltage 16-bit I 2 C-bus I/O port with interrupt and weak pull-up

PCA9555A. 1. General description. Low-voltage 16-bit I 2 C-bus I/O port with interrupt and weak pull-up Low-voltage 16-bit I 2 C-bus I/O port with interrupt and weak pull-up Rev. 1.1 6 October 215 Product data sheet 1. General description The is a low-voltage 16-bit General Purpose Input/Output (GPIO) expander

More information

Prepaid Wireless E911 Fee

Prepaid Wireless E911 Fee Objectives After completing this course, you will be able to: Understand the purpose of the fee. State the amount of the fee. Determine the registration requirements. Determine the filing requirements

More information

TOOLBOX FUNCTION: Renumber Termination Reason Codes

TOOLBOX FUNCTION: Renumber Termination Reason Codes TOOLBOX FUNCTION: Modules Affected: Versions Affected: Payroll, Human Resource Suite Version 7 (9.7c2.37 and greater) The discussion of this new function is divided into the sections shown below. Background...

More information

NEW TOOLBOX FUNCTION: TBF-004: Import G/L Journal Entries

NEW TOOLBOX FUNCTION: TBF-004: Import G/L Journal Entries NEW TOOLBOX FUNCTION: Document Ref: TBF-004 Date: Oct 31, 2003, rev. Sep 16, 2004; May 2, 2005; Mar 9, 2009 Document Version: 0.4 Modules Affected: Earliest available version of COINS: Documentation Updated:

More information

Descriptive Statistics: Measures of Center

Descriptive Statistics: Measures of Center Secto 2.3 Descrptve Statstcs: Measures of Ceter Frequec dstrbutos are helpful provdg formato about categorcal data, but wth umercal data we ma wat more formato. Statstc: s a umercal measure calculated

More information

INTEGRATED CIRCUITS. P82B96 Dual bi-directional bus buffer. Product data Supersedes data of 2003 Feb Apr 02. Philips Semiconductors

INTEGRATED CIRCUITS. P82B96 Dual bi-directional bus buffer. Product data Supersedes data of 2003 Feb Apr 02. Philips Semiconductors NTEGRATED CRCUTS Supersedes data of 2003 Feb 20 2003 Apr 02 Philips Semiconductors FEATURES Dual nterface handles both SCL and 2 C signals Bi-directional data transfer Splits 2 C signal into forward/reverse

More information

Training manual: An introduction to North Time Pro 2019 ESS at the terminal

Training manual: An introduction to North Time Pro 2019 ESS at the terminal Training manual: An introduction to North Time Pro 2019 ESS at the terminal Document t2-0800 Revision 15.1 Copyright North Time Pro www.ntdltd.com +44 (0) 2892 604000 For more information about North

More information

DKM-100. DKM-100 Data Concentrator. Operating Manual and Installation Instructions

DKM-100. DKM-100 Data Concentrator. Operating Manual and Installation Instructions DKM-100 DKM-100 Data Concentrator Operating Manual and Installation Instructions Issued 7/1997 Manual No. 73015184(a) From software version 1.2 Edition 01 From hardware version 1.2 Contents 1. GENERAL

More information

FLAC- PEPFLAC. A guide for the extraction of assignments from SIAASGN to Self-Service Banner (SSB) FLAC on SeaNet

FLAC- PEPFLAC. A guide for the extraction of assignments from SIAASGN to Self-Service Banner (SSB) FLAC on SeaNet FLAC- PEPFLAC A guide for the extraction of assignments from SIAASGN to Self-Service Banner (SSB) FLAC on SeaNet These are general FLAC instructions for all of UNCW. Your unit s instruction may differ

More information

PROGRAMMING MANUAL ELECTRONIC CASH REGISTER MODEL XE-A203 LEAD-FREE SOLDER MODEL. (For U, A version) LEAD-FREE SOLDER

PROGRAMMING MANUAL ELECTRONIC CASH REGISTER MODEL XE-A203 LEAD-FREE SOLDER MODEL. (For U, A version) LEAD-FREE SOLDER PROGRAMMING MANUAL CODE ZXEA23UPME LEAD-FREE SOLDER MODEL ELECTRONIC CASH REGISTER MODEL XE-A23 (For U, A version) CONTENTS LEAD-FREE SOLDER CHAPTER 1. MASTER RESET AND PROGRAM RESET...... 1-1 CHAPTER

More information

03/08/02 Despatch advice message - DESADV. Despatch advice message. Message Status=2

03/08/02 Despatch advice message - DESADV. Despatch advice message. Message Status=2 DESADV Despatch advice message Message Status=2 A message specifying details for goods despatched or ready for despatch under agreed conditions. The United Nations Despatch Advice Message serves both as

More information

Aeries Student Information System Create CBEDS OPUS Files SIF/CDIF and PAIF

Aeries Student Information System Create CBEDS OPUS Files SIF/CDIF and PAIF Aeries Student Information System Create CBEDS OPUS Files SIF/CDIF and PAIF The California Basic Educational Data System - Online Public Update for Schools (CBEDS-OPUS) logon page is used to provide access

More information

IMPORTING QUICKBOOKS DATA. Use this guide to help you convert from QuickBooks to Denali

IMPORTING QUICKBOOKS DATA. Use this guide to help you convert from QuickBooks to Denali IMPORTING QUICKBOOKS DATA Use this guide to help you convert from QuickBooks to Denali Importing QuickBooks Data Copyright Notification At Cougar Mountain Software, Inc., we strive to produce high-quality

More information

PCF General description. 2. Features and benefits. Industrial LCD driver for multiplex rates up to 1:8

PCF General description. 2. Features and benefits. Industrial LCD driver for multiplex rates up to 1:8 Rev. 1 31 May 212 Product data sheet 1. General description The is a fully featured Liquid Crystal Display (LCD) 1 driver, specifically designed for high-contrast Vertical Alignment (VA) LCD with multiplex

More information

TDA General description. 2. Features and benefits. Multiple smart card slot interface IC

TDA General description. 2. Features and benefits. Multiple smart card slot interface IC Rev. 1 9 March 2010 Product data sheet 1. General description 2. Features and benefits The is a cost-effective, analog interface for addressing multiple smart card slots in a Point Of Sales (POS) terminal.

More information

TRW Chassis Division

TRW Chassis Division Material Release Transaction 830 ANSI X12 Version - 003040 Introduction 1. A release will not be issued unless a purchase order already exits which describes the contractual agreement between the supplier

More information

Technical Bulletin. Important! Condition. Service. 1 of 8 C

Technical Bulletin. Important! Condition. Service. 1 of 8 C Subject: Model(s): Update Programming (Flashing) Control Module for Towing Sensor (J345) to Accept 7-Pin to 4-Pin Adapter Touareg With Towing Accessory Package and Control Module Part No:7L0 907 383C 2004

More information

Giving credit where credit is due

Giving credit where credit is due CSCE 23J Computer Organzaton Cache Memores Dr. Stee Goddard goddard@cse.unl.edu Gng credt where credt s due Most of sldes for ths lecture are based on sldes created by Drs. Bryant and O Hallaron, Carnege

More information

NEW TOOLBOX FUNCTION: TBF-007: Renumber G/L Account s Center

NEW TOOLBOX FUNCTION: TBF-007: Renumber G/L Account s Center NEW TOOLBOX FUNCTION: TBF-007: Renumber G/L Account s Center Document Ref: TBF-007 Date: Jul 18, 2007 Document Version: 0.1 Modules Affected: Earliest available version of COINS: Documentation Updated:

More information

BIOTRACK CORE SYSTEM SUPPORTED HARDWARE

BIOTRACK CORE SYSTEM SUPPORTED HARDWARE BIOTRACK CORE SYSTEM SUPPORTED HARDWARE UPDATED IN 2018 CATEGORIES VENDORS SOFTWARE REQUIREMENTS LABEL PRINTERS SCALES SCALE CABLES AND ADAPTERS BARCODE SCANNERS RECEIPT PRINTERS BATTERY BACKUP OTHER ACCESSORIES

More information

Setup and Use. For events not using AuctionMaestro Pro. Version /7/2013

Setup and Use. For events not using AuctionMaestro Pro. Version /7/2013 Verson 3.1.2 2/7/2013 Setup and Use For events not usng AuctonMaestro Pro MaestroSoft, Inc. 1750 112th Avenue NE, Sute A200, Bellevue, WA 98004 425.688.0809 / 800.438.6498 Fax: 425.688.0999 www.maestrosoft.com

More information