K-IMS. for Office. (Kawasaki-Integrated Maritime Solutions) Advanced Technology Group

Size: px

Start display at page:

Download "K-IMS. for Office. (Kawasaki-Integrated Maritime Solutions) Advanced Technology Group"

Isabel Warren
5 years ago
Views:

1 K-IMS (Kawasaki-Integrated Maritime Solutions) for Office

2 Not attempt to reveal information about this manual. Shall not disclose any information to external company or any third person other than us.

3 The following operation can do image resizing Ctrl + wheel on mouse

4 Log in address

5 . Login page 5. Structure 6. Daily Report 7-8. Selecting Vessels 9 *Creating My Group 0. Monitoring Vessel Information. Monitoring a Map. Reading a Trend graph.5 Setting the Target.6 Actual vs Target 5. Voyage Analysis 6. Selecting Vessels and Conditions Report Output Creating Report Output Downloading 9 6. Navi Monitor 0 7. Performance Monitor 8. Selecting vessel name and their condition 9. Creating Power Curve and Load Diagram 0.Creating Trend Chart. Specifying data series of Custom trend chart 5

Start Internet Explorer or Chrome, and write http://www.spas-soas.jp/kims/ in the address bar. To login to the system, follow the steps below:. Enter the user name in the User Name box.

6 Start Internet Explorer or Chrome, and write in the address bar. To login to the system, follow the steps below:. Enter the user name in the User Name box.. Write your own address (*) in the Mail Address box.. Enter the password (*) in the Password box.. Click button. *. The available vessel name that display depend on your login user. *. You will be asked to regularly change your password via . 5

7 Daily Report (Main page) Navi Monitor Performance Monitor Voyage Analysis Report Output My Group 6

8 Daily Report displays the latest operating status of vessel. When you log in, Daily Report is displayed by default. Item Name Selecting Vessel Vessel Information Status of Vessel 7

. To click [Expand] button, graph is expanded.

9 Monitoring Map Trend graph. To click [Expand] button, Map is expanded.. To click X mark, expanded map is closed.. To click [Expand] button, graph is expanded.. To click X mark, expanded graph is closed. Actual measured value vs. Target Value Display AB LOG and EP-Monitor data. Display difference between actual and target value. 8

5 6 To display Vessel information, follow steps below.. Select Department or name you created for My Group.

Select date range from below lists for report.

Any Period (select range).. Select All, hour or hour from Interval list. 5.

10 5 6 To display Vessel information, follow steps below.. Select Department or name you created for My Group.. Select vessel name. (If want to display all vessels of MY GROUP, select "All Vessel".). Select date range from below lists for report. Latest (latest data), day (last three days), week (last week), month (last month), Voyage (latest voyage), Any Period (select range).. Select All, hour or hour from Interval list. 5. Select data source of monitoring, EPM (EP-MONITOR) or SPAS (*). 6. Click [Plot] button. (*): The vessel with no EP Monitor up-grade version cannot monitor EPM data. Select all vessels from my group. Select only one vessel. 9

11 You can create a group of your frequently used vessel. Created group here can be used in DAILY REPORT screen and REPORT OUTPUT screen. Group name you created 5 5 To create MY GROUP, please follow below steps.. Specify GROUP NAME.. Select item you want to add from KIND of VSL, DEPARTMENT and COMPANY list.. Select vessel you want to add in the group.. Click the SAVE button and group is created. Note: You can add vessels to create one my group (no limit to add), but up to 0 vessels are displayed in my group list field for Daily Report. Function of this screen.. Only in operation s vessels are displayed.. Only selected vessels are displayed.. To click this button, clear all selected items.. Up to 7 vessels are displayed on the screen. If there are multiple pages, click button or type page number directly. 5. Enter search criteria and filter vessel list. 0

Voyage Information ETA Basis Calculation To calculate Required OG Speed, please follow below steps.

. Select FOC or SHP to calculate horse power.

12 Voyage Information ETA Basis Calculation To calculate Required OG Speed, please follow below steps.. Specify ETA of Local Time.. Specify ETA of UTC.. Required OG Speed is displayed. This value is calculated based on ETA. Power Basis Calculation The latest information is displayed by default.. Select FOC or SHP to calculate horse power. Able to choose SHP only when vessel is equipped with EP Monitor-upgrade version. To calculate estimated OG Speed and ETA, please follow below steps.. Specify Power.. Specify Sea Margin.. Estimated OG Speed and ETA is displayed. This value is calculated based on horse power.

5 8 7 6 To display weather information to the map, please follow below steps.. Select item from MAP TYPES lists. Click mark for WEATHER KINDS.

Select data source of weather information, Original or WNI. Each function of the map. Monitor vessel position on the map.

Select EPM (EP-MONITOR) or SPAS. 6. Select vessel name to monitor on the map and the detail is displayed. 7. To click Expand button, map is expanded. 8.

13 To display weather information to the map, please follow below steps.. Select item from MAP TYPES lists. Click mark for WEATHER KINDS.. Tick mark in checkbox you wan to display on the map. wave height wind force, direction current air pressure sea water temp swell. Select data source of weather information, Original or WNI. Each function of the map. Monitor vessel position on the map.. Move course on the vessel mark, latest performance data is displayed.. Able to select Reporting Term (note).. Able to select Interval. 5. Select EPM (EP-MONITOR) or SPAS. 6. Select vessel name to monitor on the map and the detail is displayed. 7. To click Expand button, map is expanded. 8. <> button allows you to move/ backward a vessel every 0 minutes. <<>> button allows you to move/backward a vessel every noon time. Note: If entered more than one month for reporting term, wait several minutes for output.

Function of the graph. 6. Able to access a graph by clicking related screen tab.. As you move mouse over the graph, a screen tip appear displaying values at pointed date.

14 Function of the graph. 6. Able to access a graph by clicking related screen tab.. As you move mouse over the graph, a screen tip appear displaying values at pointed date.. Display percentage of actual data on the Y-axis.. Click on the legend of graph, data series is hidden 5 from the graph. 5. Default time period for graphs is -hours. 6. To click Expand button, graph is expanded. Left-click over the graph at the specified date, vessel mark appear on the map at this day. Click vessel mark, detail information appears. Drag the gray box to move the time-axis or drag gray boxes to expand or contract the zoomed area. Link ed

15 7 5 6 To set the target, please follow below steps.. Click TARGET SETTING button.. Select vessel name.. If you want to set target from the beginning of Voyage or Port to Port, select Voyage or Port to Port from the list and click SET button.. Click + button to add new raw and specify From date from calendar lists. 5. Enter either target of M/E FOC, M/E Load or Power. 6. Click Save button. The target values are fixed. 7. Click button to close this screen. Function of each button on the screen.. Able to delete the raw you selected.. To click CALCULATION button, enable to calculate target value of two items based on assigned value.

Setting procedure is described in Chapter.5 Setting the Target. Diff:Difference between target and actual value.

16 Daily Consumption Indication The latest information is displayed by default. AB Log: Data is based on Spas Noon Report. These information is based on vessel equipped with EP Monitor upgrade version. EP-MONITOR:Automatically calculate value based on EP Monitor upgrade version. Target:Able to set optionally. Setting procedure is described in Chapter.5 Setting the Target. Diff:Difference between target and actual value. Able to monitor actual consumption and vessel s status with comparing to target value. M/E FOC, D/G FOC, M/E LOAD and OG Speed are displayed. The needle points to the position of quantity being measured. The value of indicator is displayed in the center. Procedure of changing target value is described in Chapter.5 Setting the Target. 5

17 Voyage Analysis is analyzing the operating condition for voyage. Total FOC, average output and OG Speed Compare to target value Operation performance Vessel speed rate Total hours in port Distribution of Speed and Power 6

5 7 8 To create Voyage Analysis, please follow below steps.

. Select Voyage.. Select the one of All, Laden, or Ballast. 5.

from the lists. 7. Click Plot button. 8.

18 5 7 8 To create Voyage Analysis, please follow below steps.. Select category from MY GROUP or Department.. Select vessel.. Select Voyage.. Select the one of All, Laden, or Ballast. 5. If you want to create report of Port to Port, tick Port to Port checkbox. 6. If Port to Port checkbox is ticked, select Port to Port name from the lists. 7. Click Plot button. 8. Select FOC or SHP to calculate main engine's output. If the vessel is equipped with EP Monitor upgrade version, able to select SHP. 6 7

You can create the same report as SPAS ANALYZER. 5 To create the report, please follow below steps.. Select the report you want to create.. Select vessel or group name you created.

19 You can create the same report as SPAS ANALYZER. 5 To create the report, please follow below steps.. Select the report you want to create.. Select vessel or group name you created.. Select source of data to generate report. Only if EP Monitor upgrade version is installed, able to select EP- MONITOR.. Specify the time range and other conditions. 5. Click the CREATE button. When status is changed from Requested to Completed, click button to download the report. 8

. After a few minutes wait, STATUS is still Requested, please click button. The STATUS is Completed.

20 You can download the created report. To download the report, follow the steps below.. Click (Download Report) button.. Click Save button.. Specify the destination and click the Save button.. After a few minutes wait, STATUS is still Requested, please click button. The STATUS is Completed. Note : You can specify time rage longer than SPAS ANALYZER s condition. Note : You can request other report while status is being Requested. Note : Created report is deleted eventually, please save this data into your computer. 9

You can monitor Weather Routing result on the Map screen. 9 5 7 8 6 To display weather information on the map, please follow below step. 7. Select MAP TYPE from the lists.

Weather information of optimum route is displayed by default. To monitor weather routing result, please follow below steps.

. Click Plot button. The master plan or recommended route is displayed on the map viewer. 5.

21 You can monitor Weather Routing result on the Map screen To display weather information on the map, please follow below step. 7. Select MAP TYPE from the lists. 8. Click button and select item from weather kinds lists. 9. Select Original or WIN from source of weather information. Weather information of optimum route is displayed by default. To monitor weather routing result, please follow below steps.. Click Select Plan button.. Select vessel type and name from the lists.. Select route plan you want to monitor from the list.. Click Plot button. The master plan or recommended route is displayed on the map viewer. 5. Select voyage from the lists and its graphs, summary information and WP data is displayed on the screen. 6. If you want to check the weather routing report, click button. The report will be outputted into Excel format file. 0

22 You can monitor engine status (EP-MONITOR) with specifying time range. Power Curve Load Diagram Trend Bar Chart Alarm List Vessel Route

day (latest days), week (latest week), month (latest month), Voyage (latest voyage), Any Period

23 5 To monitor engine status, please follow below steps.. Select MY GROUP name or Department name.. Select vessel name.. Select time range you want to create a report. day (latest days), week (latest week), month (latest month), Voyage (latest voyage), Any Period (select time range). Select All, hour or hour from Interval lists. 5. Click Plot button. Only EP monitor installed vessel can be selected.

24 Function buttons of Power Curve and Load Diagram chart.. Select the one of All, Laden, Ballast, Dock, or Idle.. Specify Bound.. Specify Season.. Specify Beaufort Scale (0~). 5. Specify % MCO (0~00%). 6. Specify distance. 7. Select FOC or SHP to create power curve. 8. Select vessel speed to monitor on the chart. 9. Expand the chart. 0.Click legend items in chart to hide/unhide data series..print the chart..output the chart into image file.

25 6 7 5 Function buttons of Trend graph.. Access data by clicking related screen tab.. Select time range to apply your chart.. To change scale of vertical axis, change value in Min(0%) or Max(00%) column and click REDRAW button.. Expand chart. 5. Click legend items in chart to hide/unhide data series. 6. Print the chart. 7. Output the chart into image file.

You can monitor chart by specifying data series. 5 6 7 To monitor Custom chart, please follow below steps.. Select X Axis from the lists.. Select item you want to monitor.

Click PLOT button to expand the chart. 6. Click EXPORT button to create K-IMS data for excel format file. 7. Click button, to download Excel file.

. Select item to specify data from the lists: CHANNEL NO, CHENNEL NAME or UNIT.. Select contain or does not contain to specify data.. Enter key word. 5.

26 You can monitor chart by specifying data series To monitor Custom chart, please follow below steps.. Select X Axis from the lists.. Select item you want to monitor.. Click (right arrow) button to move ticked item to the Selected box.. Click DELETE button if you do not want data series to be created. 5. Click PLOT button to expand the chart. 6. Click EXPORT button to create K-IMS data for excel format file. 7. Click button, to download Excel file Use Filter button and find data easily.. Click AND or OR button to enter multiple searching criteria.. Select item to specify data from the lists: CHANNEL NO, CHENNEL NAME or UNIT.. Select contain or does not contain to specify data.. Enter key word. 5. Click DELETE button to cancel your entered criteria. 6. Click ADD button to add another criteria to search data. 7. Click FILTER to filter data you specified. Use TAB CUSTOMIZE button and specify graph tab name.. Specify tab name of custom graph.. Click [SAVE] button. The name will be displayed on the tab. 5

NAVTOR NavTracker User Guide

NAVTOR NavTracker User Guide This guide is based on NavTracker desktop version 7.4.0.0 NAVTOR AS Strandgaten 18 4370 Egersund, Norway +47 51 49 22 00 support@navtor.com TABLE OF CONTENTS System Requirements...