Instructions to install IntelliBar Mi Series Windows 7 printer drivers (USB)
|
|
- Tyler Barrett
- 5 years ago
- Views:
Transcription
1 Instructions to install IntelliBar Mi Series Windows 7 printer drivers (USB) 1. For the most up to date driver, download from our website ( the zipped IntelliBar Mi Series Windows 7 Driver Package to the Desktop on your computer - or - place the IntelliBar Mi Series Installation Bundle v.1.00 disk in your CD Drive. If the cd auto run feature is on and the IntelliTech International splash screen appears, please X (cancel) out of it. 2. If downloaded from the web site, unzip the downloaded driver package and note where it is located on your computer. 3. Physically install your IntelliBar printer on your computer local USB port. The printer should have ribbon and labels installed and be powered on. 4. Click on the Window Start icon at the lower left hand corner of the desktop. 5. Click on Devices and Printers in the right hand column of the start window. Page 1 of 8
2 6. Click on the Add a printer link in the top tool bar. 7. The Add printer wizard will open. 8. Choose the Add a local printer for a direct connected configuration (parallel or USB port). Page 2 of 8
3 9. You will now be prompted to choose a printer port or to create a new port. Select Use an existing port: and choose the desired port of your choice. For USB, select USBXXX (Virtual printer port for USB) Then clink Next. If you do not see your desired port, you will have to select the Create a new port. In the drop down list, select Local Port and click the Next button. 10. If you selected Create a new port, enter a port name, such as USB001. Click on the OK button. 11. The Install the printer driver window will open. Click on the Have disk button. Page 3 of 8
4 12. The Install From Disk window will open. Click on the Browse button. 13. If you downloaded and unzipped the driver from the Intellitech-Intl web site, navigate to the location where you downloaded and unzipped the IntelliBar Mi Series Windows 7 Driver Package and click on the PCLtherm.pcl5c.inf file to select it and then click the Open button. If you have the IntelliBar Mi Series Installation Bundle v.1.00 disk in the CD Drive, go to D:\(or your CD drive letter)\software\windowsprintdriver\thermalprinterdriver and select PCLtherm.pcl5c.inf file. Click Open. Page 4 of 8
5 14. The Install From Disk window will reopen. Click on the OK button. 15. The Install the printer driver window will appear. Click on your IntelliBar model to select it and then click on the Next button. NOTE: The IntelliBar driver installation package senses whether your Windows 7 operating system is 32 bit or 64 bit and automatically presents the appropriate drivers for you to select. Page 5 of 8
6 NOTE: Windows will present a warning: This driver is not digitally signed! This is not cause for alarm. 16. The Type a printer name window will open. Type your choice of a name for your IntelliBar printer in the Printer name: box and click the Next button. 17. Windows may present a Windows Security Warning box, warning that Windows can t verify the publisher of this driver software. The IntelliBar Windows 7 driver will not harm your computer system. Click on the Install this driver software anyway selection to continue. Page 6 of 8
7 18. The IntelliBar driver will be installed and the Printer Sharing window will open. Choose whether or not to share the IntelliBar printer. If you choose to share, you may edit the Share name, indicate its location or add a comment. After making your selection and entries, click the Next button. 19. Windows will notify you that the IntelliBar printer has been successfully added to your system. You may set the IntelliBar as your default printer by clicking on the Set as the default printer box, or leave it unselected as you wish. Click on the Print a test page button. Your IntelliBar printer will print out the test page, or the portion of which will fit on the label you have installed in the printer. Click the Finish button to complete the installation. Page 7 of 8
8 Your IntelliBar printer is now ready for use with your Windows 7 operating system. Intellitech International Inc. 43 Broad Street Hudson, MA (978) /21/13 *** END OF DOCUMENT *** Page 8 of 8
Instructions to install IntelliBar Mi Series Windows 7 printer drivers (network)
Instructions to install IntelliBar Mi Series Windows 7 printer drivers (network) 1. For the most up to date driver, download from our website (http://www.intellitechintl.com/store/content/93-intellibar-printer-drivers-mi-series)
More informationInstructions to install IntelliBar Printer Driver on Win 7, Vista and Server 2008/2008-R2 For Model 48 and 412 Network Printers
Instructions to install IntelliBar Printer Driver on Win 7, Vista and Server 2008/2008-R2 For Model 48 and 412 Network Printers 1. Download/copy the zipped IntelliBar Driver Package to the desired location
More informationInstructions to install IntelliBar Printer Driver on Windows 8, 8.1, 10, Windows Server 2012/2012-R2 For Model 48 and 412 Network Printers
Instructions to install IntelliBar Printer Driver on Windows 8, 8.1, 10, Windows Server 2012/2012-R2 For Model 48 and 412 Network Printers 1. Download/copy the zipped IntelliBar Driver Package to the desired
More informationWindows XP - MVX Printer Driver Installation
Windows XP - MVX Printer Driver Installation READ FIRST! This document assumes you have already downloaded the driver installer ZIP package from either the Universal Laser Systems website or Universal
More informationSpecimen Label Template Implementation Requirements, Installation, and Use
Specimen Label Template Implementation Requirements, Installation, and Use The specimen label template is a Microsoft Word document that allows the user to print labels on-site for primary specimens. Each
More informationMCS-TOUCHSCREEN Auto Disk Clean up
APP093 - MCS-Touchscreen Error 16 Auto Diskcleanup Procedure Micro Control Systems APPLICATION NOTE APP-093 MCS-TOUCHSCREEN Auto Disk Clean up Revision History Date Author Revision Description 07/31/2014
More information1) Installing Bluetooth software for Windows (A) Place installation CD into PC and setup should launch automatically.
1) Installing Bluetooth software for Windows (A) Place installation CD into PC and setup should launch automatically. If setup does not launch, use Windows Explorer to navigate to the appropriate CD- ROM
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Use these instructions to install the USB and Microsoft ActiveSync synchronization software for your Monarch Pathfinder Ultra Platinum 6039 printer and computer to communicate.
More informationS2USB485 USB to RS-485 and RS-232 Converter
S2USB485 USB to RS-485 and RS-232 Converter Introduction The S2USB485 is a USB to full-duplex RS-232 and half-duplex RS-485 serial converter integrated into a single device. In essence the S2USB485 is
More informationHOWTO Make an Initial Connection to the Office Anywhere Desktop using a Windows 7 based PC v1
HOWTO Make an Initial Connection to the Office Anywhere Desktop using a Windows 7 based PC v1 1. Web browse to the Office Anywhere Portal: http://hosted.gg (as shown below) 2. Click the Access Office Anywhere
More informationINSIGHT Installation Instructions
This is the New Icon that will appear on your computer screen after the INSIGHT v8.1 software is installed. IMPORTANT: These instructions pertain to version 8.1.29. INSIGHT v8.1.29 requires Windows 8,
More informationInterlink Express Desktop Printing Service Installation Guide
Interlink Express Desktop Printing Service Installation Guide Page 1 of 10 Introduction This guide is intended to provide guidance on how to install and configure the new Interlink Express Desktop Printing
More informationApplication Note Assurance GDS Rotor-Gene Q Software Upgrade Procedure
Backing up files Prior to beginning software upgrade process it is recommended to copy all Rotor-Gene Experiment (.rex) files to a backup drive location separate from the Rotor-Gene lap top computer. Tip
More informationNetwork USB over IP Server With 1-USB2.0 Port. User Manual V1.0
Network USB over IP Server With 1-USB2.0 Port User Manual V1.0 1 2 TABLE OF CONTENTS COPYRIGHT...4 1. INTRODUCTION...5 PRODUCT OVERVIEW...5 COMPONENTS AND FEATURES...5 HARDWARE INSTALLATION...5 2. THE
More informationINSTALLATION GUIDE. ID DESIGNER PC-Based Software Installation Guide. Version 4.0
INSTALLATION GUIDE ID DESIGNER PC-Based Software Installation Guide Version 4.0 122 West State Street Traverse City, MI 49684 www.salamanderlive.com 877.430.5171 TABLE OF CONTENTS 1 ABOUT THIS GUIDE...
More informationDownloading Driver Files
The following instructions are for all DPAS supported Zebra printers except the Zebra GK420t. The ZDesigner R110Xi4 203 dpi driver has been tested and recommended for DPAS use. This driver will support
More informationremember where it is, My Documents or to the Desktop are good locations. If you do not have an extract option, you can usually just COPY and PASTE the
How do I install USB drivers? This FAQ topic covers how to install your USB drivers. Step 1: Unzipping the Drivers When you download the drivers they are in a zip file. This is a type of file which allows
More informationProcedure for Downloading & Installing the Auto-Update Platform and Updating Sensor- Aid/OBD II Module Firmware Versions
Procedure for Downloading & Installing the Auto-Update Platform and Updating Sensor- Aid/OBD II Module Firmware Versions 1 Contents Part A: Download and install the Auto-Update Platform Part B: Update
More informationInstalling the Windows Custom PostScript or PCL Printer Driver
Installing the Windows Custom PostScript or PCL Printer Driver This ReadMe file contains the instructions for installing the Custom PostScript or PCL Printer Driver on Windows systems. The Custom PostScript
More informationVersion S Cincinnati, Suite 105 Tulsa, OK (918) Fax (918)
Version 1.0 We pride ourselves in producing good stuff. If you have any questions, problems, or suggestions regarding this product, please contact us at: 810 S Cincinnati, Suite 105 Tulsa, OK 74119 (918)
More informationInstallation Instructions for Free Scheduler Plus Software IBS Show Promotion
Installation Instructions for Free Scheduler Plus Software IBS Show Promotion Offer ends 1/12/17 limited copies available! Thank you for your decision to use our Free copy of Scheduling Plus to help streamline
More informationDouble click the downloaded installation file (MPMLink.exe) to initiate the installation.
MPM Link Quick Start Installing MPM Link. Make sure your PC has an active Internet connection. MPMLink prerequisites may be required and those will be downloaded automatically from a Microsoft site. Double
More informationUSB DRIVER INSTALLATION GUIDE
USB DRIVER INSTALLATION GUIDE Use these instructions to install the USB drivers and Microsoft synchronization software for your Pathfinder 6057 printer. You need these utilities for your printer to communicate
More informationFirmware zippack name : R exe Firmware File Name : Dell1815dn_V _AutoUpgrade.exe
Updating Firmware on the Dell Laser Printer MFP 1815dn NOTICE: Do not turn off your printer or computer, or disconnect any cables during this operation. Doing this will corrupt the memory and the printer
More informationSmartPro Software Installation Guide. SmartPro Software Installation Guide
SmartPro Software Installation Guide www.protosmart.co.uk Page 1 of 11 Features... 3 Kit Contents... 3 Software Installation... 3 Driver Installation... 7 www.protosmart.co.uk Page 2 of 11 Please view
More informationNPort Express, NPort Server Family, Async Server Windows XP Driver Installation Guide. Second Edition, December 2001
1 NPort Express, NPort Server Family, Async Server Windows XP Driver Installation Guide Second Edition, December 2001 Table of Contents Windows XP Driver Installation... 2 Installing the NPort Product...
More informationProcedures to Install Eye Com's ImageMouse and ImageMouse Plus using Windows XP platform
Procedures to Install Eye Com's ImageMouse and ImageMouse Plus using Windows XP platform 8-08-2005 The ImageMouse runs on the XP platform provided it is set up using NTFS, has the latest XP service pack
More informationC5100 Computer Connections & Software Install Guide
C5100 Computer Connections & Software Install Guide Installation Checklist Network Install: Hardware...4 Connect to the Network Port...4 Network Install: Software...5 TCP/IP...5 Local Install: USB, Hardware...7
More informationINSTALLING THE PS3 XBOX READY SOFTWARE:
INSTALLING THE PS3 XBOX READY SOFTWARE: 1. Insert the Installation CD to CD-ROM drive and execute Ready_Setup.exe NOTE: If it is the first time for the target USB disk using under this software, the software
More informationSetting up the PC ready for BESA 11
Setting up the PC ready for BESA 11 1 - Installing Driver. Important Note: Before you start to install the driver, please do not plug BESA 11 into the computer s USB port or else the installation will
More informationOlimex Field Update Kit
Olimex Field Update Kit Table of Contents Overview... 2 To download the field update software... 2 To install the HQLoader software... 2 To install the USB to Serial Converter driver... 2 To install the
More informationTo Set Up your OKIPAGE 8z using Windows XP with USB or Parallel Connection:
OKIPAGE 8z Product Update To Set Up your OKIPAGE 8z using Windows XP with USB or Parallel Connection: Follow steps 1 through 6 in the Quick Setup guide. Then follow the instructions below. Start with both
More informationPanther Probe Inc. Real Time DeadWeight Software Manual
Panther Probe Inc. Real Time DeadWeight Software Manual November 2008 1 Table of Contents Communication page 3 Set Chart / Well Info page 5 Real-Time features page 7 Report Viewer page 11 View Report page
More informationFairfield University Using Xythos for File Storage
Fairfield University Using Xythos for File Storage Version 7.0 Table of Contents I: Accessing your Account...2 II: Uploading Files via the Web...2 III: Manage your Folders and Files via the Web...4 IV:
More informationUpdating your uscope Firmware
2018-08-23 Updating your uscope Firmware Step 1 Update Computer Requirements All uscopes can be updated using a Windows Vista or 7 computer. Only newer uscopes can be updated using a Windows 10 computer.
More informationDEPOSITPARTNER INSTALLATION GUIDE Desktop Application
DEPOSITPARTNER INSTALLATION GUIDE Desktop Application SCANNER DRIVER INSTALLATION NOTE: In order for the scanner to work properly, the scanner drivers must be installed before downloading the DepositPartner
More informationWindows XP Software Installation Instructions GCC Elite Series Printers
TM Windows XP Software Installation Instructions GCC Elite Series Printers This document is intended to provide instructions for obtaining and installing the Windows XP driver software for GCC s Elite
More informationmce100+ getting started guide Install mce100+ The disc will run and display the below screen: Choose Install mce to continue
content between two the phonebook records of a content from a 1. Insert the mce CD. 2. Choose the Run mce Setup button. The disc will run and display the below screen: Choose mce to continue 5. Ready to
More informationUSB SERIAL ADAPTOR COM PORT INSTRUCTIONS
USB SERIAL ADAPTOR COM PORT INSTRUCTIONS No part of this work covered by the copyright hereon may be reproduced, copied, transferred or distributed in any form or by any means -- graphic, electronic, or
More informationSystem Requirements. Package Contents
System Requirements A computer or laptop with an available USB 2.0 port Windows 2000 (SP4) or XP (SP2) 300MHz processor and at least 32MB of RAM Properly installed and working USB Controller A draft 802.11n
More informationLab - Configure Browser Settings in Windows 8
Introduction In this lab, you will configure browser settings in Microsoft Internet Explorer. Recommended Equipment A computer with Windows 8 An Internet connection Step 1: Set Internet Explorer as the
More informationInstalling the Windows Custom PostScript or PCL Printer Driver
Installing the Windows Custom PostScript or PCL Printer Driver This ReadMe file contains the instructions for installing the Custom PostScript or PCL Printer Driver on Windows systems. The Custom PostScript
More informationPC-ACE Upgrade Instructions
Important: Please follow these recommendations before starting the upgrade. 1. Make sure that you have a valid backup of the PC-ACE software. For instructions on this please view the General Setup document
More informationBluetooth Micro Dongle User s Guide. Rating: 5V DC 80mA Made in China
Bluetooth Micro Dongle User s Guide Rating: 5V DC 80mA Made in China Introduction Package Contents USB Bluetooth adapter x 1 Installation CD x 1 (includes Bluetooth software and User s Guide) User s Guide
More informationCellRoute 3G. Fixed Wireless Terminal. Data Connectivity
CellRoute 3G Fixed Wireless Terminal Data Connectivity Version 2 December 2010 This manual will help you to set-up the CellRoute 3G on your PC or laptop. Follow the instructions that apply to the version
More informationAuto Code PC Software Installation Instructions. This guide provides you with details of how to install the Auto Code PC Software
Auto Code PC Software Installation Instructions This guide provides you with details of how to install the Auto Code PC Software Contents Auto Code Download Application... 4 Auto Code Registration Procedure...
More informationIP Firmware Upgrade. Upgrading the IP firmware 1. Log into the KVM web configuration interface and access the Device Upgrade section.
The B070-016-19-IP has two sets of firmware; one to control IP access, and the other to control the KVM s Mainboard and OSD. The Mainboard/OSD firmware is also used to upgrade the firmware of the Server
More informationCAUTION: DO NOT INSTALL OEM INK BEFORE INSTALLING ChromaBlast-R INK. Do not power ON the printer before installing the cartridges.
CAUTION: DO NOT INSTALL OEM INK BEFORE INSTALLING ChromaBlast-R INK. Do not power ON the printer before installing the cartridges Ricoh GX e3300n Installation Guide Note: If you experience any communication
More informationFaber 6000/Faber 6000 Plus USB Driver Installation for Windows 7/10
Faber 6000/Faber 6000 Plus USB Driver Installation for Windows 7/10 This guide covers multiple scenarios and only a subset of this guide will affect each user depending on the plotter version and the version
More informationHow do I apply the patch files?
How do I apply the patch files? 1. Once the patch file has been saved to your hard disk, use Windows Explorer (Start > Programs > [Accessories > ] Windows Explorer) to browse to the directory where the
More informationUSB SERIAL ADAPTOR COM PORT INSTRUCTIONS
USB SERIAL ADAPTOR COM PORT INSTRUCTIONS No part of this work covered by the copyright hereon may be reproduced, copied, transferred or distributed in any form or by any means -- graphic, electronic, or
More informationInstalling HostExplorer 10 For the PC Author: Byron Watanabe
WIN1013 July 2005 Installing HostExplorer 10 For the PC Author: Byron Watanabe Requirements Requirements... 1 Obtaining HostExplorer... 1 Preparing to install... 1 Installation... 2 HostExplorer 10.0 supports
More informationDo NOT install the GCC USBsetup program on a 64 BIT OS.
Installing a C180 Print Driver on a 64 Bit OS connected by the USB connection. (Same instruction may also be used on all 32 Bit OS as well.) Copyright Koser Enterprises, Inc 2013 Member of the LaserProNA.com
More informationSYSTEM REQUIREMENTS FOR MINIMUM PERFORMANCE PC
1 GENIUSPRO SYSTEM REQUIREMENTS FOR MINIMUM PERFORMANCE PC Processor Pentium Dual-Core inside TM 2 Gb RAM Windows: XP SP3 or Vista, 7 or 8 Microsoft.NET Framework 4.0, if current is before 3.5, first install
More information1. Installing the Drivers for Windows
For Ralink chipset products, please kindly refer to the following steps. 1. Installing the Drivers for Windows 1. Power on your PC, let the operating system boot up completely, and login as needed. 2.
More informationParallel Printers Set-Up
Parallel Printers Set-Up - 25 - Setting up a Local Parallel Printer in Windows 95/98 Left click on the START button. Go to SETTINGS, and then PRINTERS. 1. Locate and double left click on the ADD PRINTER
More informationInstallation of fi-4110cu Scanner under Windows 2000
Installation of fi-4110cu Scanner under Windows 2000 Connect the scanner to the PC. Turn on the scanner and then the PC Log into Windows Note: The user must log in with administrator authority. For information
More informationPrint Server Setup Guide (NF1ADV)
Print Server Setup Guide (NF1ADV) Print Server Setup for the NF1ADV This set of print server setup instructions is intended for use with printers connecting with a USB cable connection being plugged into
More informationRetrieve Download File from CSDI Installation Instructions
Retrieve Download File from CSDI Installation Instructions Rev. 12-001 FOOD & NUTRITION MANAGEMENT SYSTEMS This instruction sheet provides instructions for installing our Retrieve Download File from CSDI
More information1. Click on the Windows button in the bottom left corner of your screen and select Control Panel.
APNK "WiFi Can I Print" Windows Vista step by step instructions 1. Click on the Windows button in the bottom left corner of your screen and select Control Panel. 2. Hardware and Sound Printer Windows Vista
More informationPrinter Combo Adapter QUICK START GUIDE VERSION 1.1
Printer Combo Adapter QUICK START GUIDE VERSION 1.1 Bluetooth All rights reserved. All trade names are registered trademarks of respective manufacturers listed. The Bluetoothname and the Bluetoothtrademarks
More informationHow To Download And Install MapPro for Networks
These instructions are specifically designed for users with a serial number that begins with ZN. You should have a working knowledge of your network so you know what folder is shared on your MapPro host
More informationUSER MANUAL USB Bluetooth Adapter
USER MANUAL USB Bluetooth Adapter UBT-120 CONTENT 1. Introduction--------------------------------------------------------------------------------- 2 2. Package Content-------------------------------------------------------------------------
More informationUSER MANUAL for USB Data Link
Driver Installation Under Win 95 OSR2.1 1.Step1: Double click "My Computer" "System Properties" "Device Manager" Step2: While installing USB Data Link Cable under Windows 95 OSR2.1 mode, make sure "Universal
More informationBESTCOMSPlus Software
9440300990 Rev P 123 General Description BESTCOMSPlus is a Windows -based, PC application that provides a user-friendly, graphical user interface (GUI) for use with Basler Electric communicating products.
More informationFirmware, Database, & PC Application Update Installation Instructions
Firmware, Database, & PC Application Update Installation Instructions IMPORTANT Please read before you begin the installation. To avoid possible errors, it is recommended to install the updates as described
More informationmenu of icons which you can select which item you want to use to startup the computer.
To begin, insert the media that came with your computer into your CD / DVD drive. While the media is in the computer, power the computer off and restart the system. Upon restart you will need to press
More informationLPR for Windows 95/98/Me/2000 TCP/IP Printing User s Guide
LPR for Windows 95/98/Me/2000 TCP/IP Printing User s Guide Rev. 02 (August, 2001) Copyright Statement Trademarks Copyright 1997 No part of this publication may be reproduced in any form or by any means
More informationumapps Using umapps 6/14/2017 Brought to you by: umtech & The Center for Teaching & Learning
umapps Using umapps Center for Teaching and Learning (CTL) 100 Administration Bldg., Memphis, TN 38152 Phone: 901.678.8888 Email: itstrainers@memphis.edu Center for Teaching and Learning Website 6/14/2017
More informationBEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING
Software Setup Guide BEFORE INSTALLING THE SOFTWARE SETUP IN A WINDOWS ENVIRONMENT SETUP IN A MACINTOSH ENVIRONMENT TROUBLESHOOTING Thank you for purchasing this product. This manual explains how to install
More informationDigidoc Icon Camera Installation
Digidoc Icon Camera Installation 1. Insert the Icon Camera CD. Do not run anything from the cd until prompted. 2. Plug in the Icon Camera into a USB 2.0 port. This port MUST be 2.0. The PC will find the
More informationSun VirtualBox Installation Tutorial
Sun VirtualBox Installation Tutorial Installing Linux Mint 5 LTS Guest OS By Dennis Berry Welcome to the world of virtualization and Linux. This tutorial is intended to help users who are new to the world
More informationUSB driver and Software Installation. UPS Monitoring and Management Software
USB driver and Software Installation UPS Monitoring and Management Software LEN.MAN.SOF.143 Rev.1.00/2008 Installing USB driver and Easy-Mon X for LEONICS UPS 1. Installing and uninstalling the USB driver
More informationUsing Your i930 as a Modem. User Guide
Using Your i930 as a Modem User Guide Using Your i930 as a Modem User Guide This user guide describes how to install modem drivers on your computer and connect your i930 Smartphone to your computer to
More informationUpgrading your QuickBooks Company File Once per file only
Username: «User» License: «License_Number» Product: «Product_Number» This document walks you through upgrading your QuickBooks company file. If your file has already been upgraded, you may skip below to
More informationThank you for purchasing a ZT-1300 printer! The following guide will help you install the equipment and software that goes with your ZT-1300 printer.
Thank you for purchasing a ZT-1300 printer! The following guide will help you install the equipment and software that goes with your ZT-1300 printer. It is strongly recommended that you read through the
More informationINSTALLATION GUIDE. RAPID TAG PC-Based Software Installation Guide. Version 5.0
INSTALLATION GUIDE RAPID TAG PC-Based Software Installation Guide Version 5.0 122 West State Street Traverse City, MI 49684 www.salamanderlive.com 877.430.5171 TABLE OF CONTENTS 1 ABOUT THIS GUIDE... 2
More informationJPRO Fleet Service Portal User s Guide
JPRO Fleet Service Portal User s Guide 1 System Requirements Supported Operating Systems Windows 2000 Windows XP Hardware Requirements Minimum: 128 MB RAM, 2 GB HD, Pentium II, 1024 x 768 monitor Recommended:
More information2.7 Installing the Windows Printer Driver
2.7 2.7.1 USB Driver Installation Step 1. Step 2. Step 3. Step 4. Step 5. Step 6. If not already done, connect power to the printer. Turn power OFF. Connect the USB port on the rear of the printer to the
More informationBefore You Begin You must have at least the following: Windows XP/Me/2000/98SE or Macintosh OS X v One Available USB Port CD-ROM Drive
This product can be used with: Windows XP, Me, 2000, 98 Second Edition, Macintosh OS X v10.1.4 DBT-120 D-Link PersonalAir Bluetooth USB Adapter Before You Begin You must have at least the following: Windows
More informationPIN Pad: Installation
Ascend Support Phone: 877-875-8663 Email: help@ascendrms.com Web: www.ascendrms.com PIN Pad: Installation PIN pads must be purchased from Ascend in order to function properly. To order, email sales@ascendrms.com.
More informationSetting a Computer Up to Run Warrior. Warrior Software Version 7.0 Standard Cased Hole SCIENTIFIC DATA SYSTEMS, INC.
SCIENTIFIC DATA SYSTEMS, INC. Warrior Software Version 7.0 Standard Cased Hole Setting a Computer Up to Run Warrior This document contains proprietary information. Copyright 2005 Scientific Data Systems,
More information12.0 Setting up the PC ready for BESA 11
12.0 Setting up the PC ready for BESA 11 12.1 - Installing Driver. Important Note: Before you start to install the driver, please do not plug BESA 11 into the computer s USB port or else the installation
More informationTechnical Bulletin DS2
Product: DS-Matrix Software TB 221 Date: July 25 th, 2012 Subject: How to Upgrade DS-Matrix Software This document describes the procedure for upgrading the DS-Matrix software. If you are upgrading from
More informationifax Mail linking software for TIFF converter user's guide
ifax Mail linking software for TIFF converter (Version supporting MAPI mailer linking function) user's guide - Windows 95/98 English version - Copyright Panasonic Communications Co., Ltd. 1998 July. Contents
More informationEncrypting a non-hrh laptop
Encrypting a non-hrh laptop The purpose for data encryption is to provide data security. We have chosen to deploy the encryption technology of TrueCrypt. After encrypting your system drive your data will
More informationDirect Certification FTP Setup Instructions
Direct Certification FTP Setup Instructions Rev. 13-000 FOOD & NUTRITION MANAGEMENT SYSTEMS This instruction sheet provides instructions for installing our Direct Certification Automated FTP software to
More informationM4 USB Interface Installation Guide
M4 USB Interface Installation Guide This document contains instructions for installing your M4 Programming Software and M4-USBINT hardware into the Windows operating system. The M4 Programmer software
More informationDot Matrix Indicator Programming
Dot Matrix Indicator Programming Preparation: USB Dongle and USB cable. Part No. 100-159 (see page 3 Dongle Installation Instruction ). Display Programmer V2.0 (see page 10 Display Programmer V2 Installation
More informationFirmware, Database, & PC Application Update Installation Instructions
Firmware, Database, & PC Application Update Installation Instructions IMPORTANT Please read before you begin the installation. To avoid possible errors, it is recommended to install the updates as described
More informationMicrosoft Windows 10. Quick Reference. Watsonia Publishing 47 Greenaway Street Bulleen VIC 3105 Australia
Watsonia Publishing 47 Greenaway Street Bulleen VIC 3105 Australia www.watsoniapublishing.com info@watsoniapublishing.com Quick Reference Course Code: INF1440 Table of Contents Chapter 1: Starting With
More informationSection 4: Installing the ECC (Epilog Control Center)
Section 4: Installing the ECC (Epilog Control Center) In This Section Installing the ECC The ECC (Epilog Control Center) provides Job Management features as well as laser control and laser machine configuration
More informationScenario 1a Direct Serial Communication via a 9 Pin Serial/RS232 Port
** IMPORTANT ** Please ensure you have some IT experience before attempting the installation of your Nexa PX700/PX900 Receipt Printer! How do I connect the Nexa Printer to my Computer? The Nexa PX700 &
More informationTransmission Assistant Installation Guide (Windows 7)
Windows 7 users need to be logged in as an Administrator on their Windows 7 PC before beginning the installation process. A. ORDERBASE MINI HARDWARE INSTALLATION PROCEDURE 1. Plug in the OrderBase Transmission
More information2. This will bring you to a new window asking what type of policy you are inserting. Personal Policies. Commercial Policies. All Other Policies
How to Insert a New Client File To insert a new client file you can do this one of two ways. The first way is to manually insert the client file through Hawksoft. You would use this method if you are writing
More informationStep 1. Overview. Goal. System Requirements - 1 x WaveAce passive probe. Setup
Lab 6 EasyScope Remote Control (30 Minutes) Note:(Screenshots below show a white background configuration of your WaveAce to save black ink in printing, this configuration is explained in Lab 2 VIEW) Overview
More informationProduct Instruction. Drew3 Control Assay Data File Internet Download and Installation Instructions
Product Instruction Drew3 Drew3 Control Assay Data File Internet Download and Installation Instructions Purpose: This document provides instructions for the Internet download and installation of the Drew3
More informationConfiguring the TSP100 for POSERA Maitre D Software. Created April 2009
Created April 2009 This application note shows how to set up the USB TSP100 for guest check printing from POSERA Maitre D Software. Recommended Restaurant Printer Options: Splash Proof Cover, Vertical
More informationConfiguring Microsoft Outlook to Connect to Hosted Exchange Service
Configuring Microsoft Outlook to Connect to Hosted Exchange Service Configuring Microsoft Outlook for Hosted Exchange Service Version: 1.0 Updated on: April 27, 2011 Page 1 of 7 TABLE OF CONTENTS Configuring
More informationINSTALLATION GUIDE. RAPID TAG EVAC PC-Based Software Installation Guide. Version 5.0
INSTALLATION GUIDE RAPID TAG EVAC PC-Based Software Installation Guide Version 5.0 122 West State Street Traverse City, MI 49684 www.salamanderlive.com 877.430.5171 TABLE OF CONTENTS 1 ABOUT THIS GUIDE...
More information