SSA Baan IVc4. Deployment Guide for Unix and Windows

Transcription

1 SSA Baan IVc4 Deployment Guide for Unix and Windows

2 Copyright 2004 by Baan International B.V., a subsidiary of SSA Global Technologies, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any way or by any means, including, without limitation, photocopying or recording, without the prior written consent of Baan International B.V. Important Notices The material contained in this publication (including any supplementary information) constitutes and contains confidential and proprietary information of Baan International B.V. By gaining access to the attached, you acknowledge and agree that the material (including any modification, translation or adaptation of the material) and all copyright, trade secrets and all other right, title and interest therein, are the sole property of Baan International and that you shall not gain right, title or interest in the material (including any modification, translation or adaptation of the material) by virtue of your review thereof other than the non-exclusive right to use the material solely in connection with and the furtherance of your license and use of software made available to your company from Baan International pursuant to a separate agreement ( Purpose ). In addition, by accessing the enclosed material, you acknowledge and agree that you are required to maintain such material in strict confidence and that your use of such material is limited to the Purpose described above. Although Baan International has taken due care to ensure that the material included in this publication is accurate and complete, Baan International cannot warrant that the information contained in this publication is complete, does not contain typographical or other errors, or will meet your specific requirements. As such, Baan International does not assume and hereby disclaims all liability, consequential or otherwise, for any loss or damage to any person or entity which is caused by or relates to errors or omissions in this publication (including any supplementary information), whether such errors or omissions result from negligence, accident or any other cause. Baan International B.V., is a wholly owned subsidiary of SSA Global Technologies, Inc. Trademark Acknowledgements SSA Global, SSA and the SSA Global logo are trademarks of SSA Global Technologies, Inc. in the United States and/or other countries. Baan is a trademark of Baan International B.V., in the United States and/or other countries. All other company, product, trade or service names referenced may be registered trademarks or trademarks of their respective owners. Publication Information Document code Release Document title : U7949H US : SSA Baan IVc4 Publication date : January 06 : Deployment Guide for Unix and Windows

3 Table of Contents Chapter 1 Installation and deployment procedure for SSA Baan IVc Technical Notes Extensions To install and deploy SSA Baan IVc Description of solution number Chapter 2 Language Update on Unix To load the software Language update Chapter 3 Language Update on Windows...3-1

4 ii Table of Contents

5 About this Guide This document is a Deployment Guide that outlines how to install and deploy the SSA Baan IVc4 software. The information in this guide is intended for system administrators and installers. To understand this document, you must have elementary knowledge of UNIX, Windows 2000 or Windows In addition, understanding the contents is easier if you are familiar with the structure of SSA Baan IV. This document is subdivided into the following chapters: Chapter 1, Installation and deployment procedure for SSA Baan IVc4, describes the installation and deployment procedure for SSA Baan IVc4. Chapter 2, To update an existing SSA Baan IV environment with a language on UNIX, describes the steps you must take to update the SSA Baan IVc4 standard with a language update on a UNIX platform. Chapter 3, To update an existing SSA Baan IV environment with a language on Windows 2000, describes the steps that you must perform to update the Baan IVc4 standard with a language update on a Windows 2000 or Windows 2003 platform. Send us your comments We continually review and improve our documentation. Any remarks/requests for information concerning this document or topic are appreciated. Please e- mail your comments to documentation@ssaglobal.com. In your , refer to the document number and title. More specific information will enable us to process feedback efficiently.

6 iv About this Guide

7 Chapter 1 Installation and deployment procedure for SSA Baan IVc4 1 The information provided in this chapter is intended for system administrators and installers. This chapter outlines how to install and deploy the SSA Baan IVc4 software. Technical Notes For additional technical information and the latest solutions, refer to the SSA One point Online support Services Web site at the following link: You must check solution number for the latest SSA BaanIVc4 Technical notes.

8 1-2 Installation and deployment procedure for SSA Baan IVc4 Extensions For information on how to install extensions on Windows, refer to the Installation guide for Extensions on Windows (U7101 US). If your installation runs on a UNIX machine, you can consult the following documents: Title Installation Guide for Baan IVc4 Supply Chain Installation Guide for Baan IVc4 Controlling Installation Guide for Baan IVc4 Supply Chain/Controlling Installation Guide for Baan IVc4 Multicurrency Installation Guide for Baan IVc4 Automotive Document ID U7084 US U7085 US U7086 US U7088 US U7385 US These documents provide information about how to set up the extension software. To install and deploy SSA Baan IVc4 To install and deploy SSA Baan IVc4, take the following steps: 1 Install the files on the SSA Baan IVc4 Standard distribution CD-ROM, including the porting set for Windows 2000, Windows 2003 or the Baan IVc4 Standard distribution CD-ROM, including the porting set for UNIX. Install the software as described in the relevant Installation Guide, depending on your operating system and RDBMS. For more information, see the following table. Note 1: The Installation Guide for SSA Baan IV on UNIX (U7016 US) contains a chapter that describes how to customize the SSA Baan IV software. You must perform these tasks. Note 2: The Installation Guides for SSA Baan IV on Windows machines contain a chapter about post installation tasks. Be sure to complete those tasks before you attempt Steps 2 through 7 in this chapter.

9 Installation and deployment procedure for SSA Baan IVc4 1-3 RDBMS Installation guides for UNIX Installation guides for Windows Oracle 8i U7016 US + U7028 US U7051 US Informix 9.40 U7016 US + U7029 US U7018 US DB2 v 8.1 U7016 US + U7030 US U7181 US MSSQL U7210 US 2 Initialize and set up the Product Maintenance and Control (PMC) tool, as described in Quick Guide Product Maintenance and Control, available on the Service Pack CD-ROM Batch Install (BD ). For additional instructions on how to initialize PMC, refer to the Installation Guide for Baan IVc4 SP 1-12 Batch Install Solution (U8152 US). 3 Install the patches for the new commercial functions for the databases of ORACLE, and DB2 and Linux Operating System. The patches are available under solution number and through the support Web site. These solutions are only valid for Unix installs. Click the following link to retrieve the solution(s): Note 1: If you cannot access solution directly, refer to the Porting set CD-ROM or to Description of solution number 17777, later in this chapter. Note 2: If you run MSSQL2000, validate under MSSQL7.0 and, if you run DB2v8, validate under DB2V5 and, if you run Oracle9, validate under Oracle8. Linux System Take the following steps, to license the Linux System. Install the solution from the web through PMC. Run correction program ottcorlinux You are now able to activate Porting Set Linux x86 Suse" in the Maintain Requested System Configuration (ttadv0145m000).

10 1-4 Installation and deployment procedure for SSA Baan IVc4 IA64/HP-UX Take the following steps, to license the IA64/HP-UX platform. Install the solution from the web through PMC to license HP- UX11.23 (Itanium). Run correction program ottcoritanium You are now able to activate Porting Set IA64/HP-UX" in the Maintain Requested System Configuration (ttadv0145m000). 4 If you are installing a non-english language version of SSA Baan IVc4, you must install the SSA Baan IVc4 <language> update on top of the standard. For more information about the language update on UNIX, refer to Chapter 2, Language update on UNIX, or Chapter 3, Language update on Windows, depending on your operating system. 5 If you want to use the extension software you must now install and set up this software. Localization B40Lc4cnt0 B40Lc4mcr0 B40Lc4nas0 B40Lc4scc1 B40Lc4sch1 Description Controlling Multi currency Automotive Supply Chain Controlling Supply Chain 6 Install all standard Service Packs by using the Batch Installer as described in the Installation Guide for Baan IVc4 SP1-12 Batch Install Solution (U8152 US). 7 If you have installed a non-english language version of SSA Baan IVc4 with a language code of 5 or higher (all languages apart from English, Dutch, German, or French), you must use the Batch Installer again to install the all Service Packs for <language>.

11 Installation and deployment procedure for SSA Baan IVc4 1-5 Description of solution number Solution Detail Title: Patches for Database Maintenance of MSSQL7.0, ORACLE8, and DB2v5 Solution description VERSION: Baan IVc. SITUATION DESCRIPTION: Add commercial functions for MSSQL7.0, ORACLE8, and DB2v5. SOLUTION DESCRIPTION: NOTE: THIS MUST BE APPLIED PRIOR TO UPGRADING YOUR DATABASE! The following two patches must be installed: ftp://ftp.support.baan.com/updates/port/dumps/tttiex dmp ftp://ftp.support.baan.com/updates/port/dumps/patch_b40c4.dmp == Part I: ttiex dmp == This sequential dump adds three commercial functions to table ttiex This will allow validation of the proper database. Note that to avoid "Error 515 / Unpatched Binary" errors, this validation must be completed before the upgrade of the database. t057 DB2 V5 t062 Oracle8 Server t063 MSQL Server 7 1.) Rename the file tttiex dmp to tttiex s 2.) The dump tttiex s is a bdbpre dump and must be installed using the following bdbpost command: bdbpost -A -n -m -D. -t" " -c000 (do this from the directory where the dumps have been placed) 3.) Use ttiex3101m000 to ensure that versions 6.5 and 7.0 of MSSQL have been set to runable == Part II: patch_b40c4.dmp and Completing the Upgrade Process == This patch replaces many of the validation sessions, and adds the enum choices for the new database versions into session ttaad4110m ) Install patch_b40c4.dmp with the ttiex1284m000 session, all of its objects are from the package "tt," so you must choose the proper VRC that contains your "tt" package. 2.) Run session ttadv5213m000, and choose to "Also Dump Data Definitions" 3.) Log out of/back into Baan 4.) Use ttiex3400m000 to print your Requested System Configuration You can now return to your installation manual to complete the post installation tasks, or any other tasks that you have not yet finished.

12 1-6 Installation and deployment procedure for SSA Baan IVc4

13 Chapter 2 Language Update on Unix 2 This chapter describes how to update an existing SSA Baan environment with a language on a UNIX system and describes how to do the following: Load the software. Update the existing environment with a language. Note: You must log on as root and use the rc.stop command in $BSE/etc to stop the SSA Baan IVc4 environment before you start to update the environment. To load the software This section describes how to load the SSA Baan IV software from a local CD-ROM device attached to the UNIX server. Take the following steps: 1 Log on as user root and create the directory in which to load the SSA Baan IV software, for example, /usr2/cdrom. To create this directory, type the following commands: #mkdir /usr2/cdrom #chmod 777 /usr2/cdrom Note: Never load the software into a directory of an existing BSE environment, because this can destroy the existing environment or the installation script might not work.

14 2-2 Language Update on Unix 2 Type the following command to change directories to the directory you created in Step 1: #cd /usr2/cdrom 3 Insert and mount the Portingset installation CD-ROM. 4 Enter the following command at the system prompt to retrieve the installation script from CD-ROM: #cp /cdrom/unix/cd.read6.1 /usr2/cdrom 5 Start the cd.read6.1 utility from the UNIX shell to read the software from the CD-ROM. If you start the cd.read6.1 script from the CD-ROM directly, you can mount the next CD-ROM. Enter the following command: # sh cd.read6.1 A window with help information appears. 6 Read the information and press ENTER to continue. The following menu appears, which asks you which option must be installed: Available options for this cd.read6.1 1) Select Operating System and Packages 2) Select Operating System only 3) Select Packages only 4) Select components for Workstation installation Choice: [1] 7 Choose one of the following options: Press ENTER to choose 1 for a complete installation of the Package VRCs and operating system (full server installation). Press 2 if you want to read the executables for the chosen operating system from the CD-ROM. The cd.read6.1 script skips the steps that describe the VRC and language selection. Press 3 if you want to read the Package VRCs from the CD-ROM. The cd.read6.1 script will skip step 9 and 10. Press 4 if you want to read the workstation software from the CD- ROM. The default is 1 so press ENTER for a complete installation of Package VRCs and the operating system, in other words, a full server installation.

15 Language Update on Unix 2-3 A question appears that asks you where the Porting set CD-ROM is mounted. Mount the CD-ROM with the operating system (Portingsets) Enter the location of the CD-ROM file system: [/cdrom] Next, a menu usually appears that asks you which operating system you want to install. The following message now appears: Warning: No operating system on this CD-ROM, nothing to copy The script continues automatically with the next step. A menu appears that asks you which packages you want to install. 8 Press ENTER if you want to install the displayed packages. Press N followed by ENTER if you want to choose different packages. 9 A menu appears that asks you which languages you want to install. Press ENTER if you want to install the displayed languages. Press N followed by ENTER if you want to choose different languages. A message appears that shows the available amount of disk space. If insufficient disk space is available to read the software, you must create additional disk space. Another option is to choose fewer languages or packages and restart the process. 10 Press ENTER to continue. After all the required software has been read from the CD-ROM you are ready to run Install6.1 to install the software.

16 2-4 Language Update on Unix Language update Note: Before you start the update, notify the SSA One point Online support Services, who can provide you with the latest information about the update. Use the following steps to update the Tools and Application packages: 1 Log on as user root (do not use the su command) and set the TERM variable to vt100 or any other valid value. 2 Change directories to the directory in which the Baan files were read by the cd.read6.1 script and enter the following command: # sh./install6.1 The selection phase of the installation script can be stopped at any time, in other words, before you are asked if you are ready for installation, by pressing an interrupt sequence, for example, CTRL+C. The script can be restarted as often as desired. From the script, to activate a subshell, you can press the exclamation point (!). To end this subshell, type exit at the UNIX prompt. You then return to the script where you left off. CAUTION: Never use the tee command to create a log file. The installation script starts the bshell and, if you used the tee command, no bshell window appears on the screen. During the installation, the Log.install6.1 log file is generated in the directory where you started the installation. After you create a temporary bse environment, you are asked to supply the path to the already installed Baan Software Environment (BSE) directory. 3 Specify the path and be sure to enter the complete path. The default value $BSE/tmp is suggested for the BSE_TMP environment variable. 4 Press ENTER to accept the default and press ENTER to continue. Note 1: The process can prompt you to write the values of the $BSE-related variables to the system-wide profile /etc/profile. Do not write these variables to the system-wide profile. Note 2: The process can prompt you to write the $BSE variables to the profiles of the users. If you do not want to write the variables to the.profile files of the individual users, press ENTER to accept the default answer, which is No.

17 Language Update on Unix 2-5 The following message appears: THIS IS AN UPDATE Do you want to reinstall old components too? (Full Update)? No 5 Type No. If you type Yes, all language components and former installed PMC solutions will be overwritten. This can cause severe problems. 6 Press ENTER. The following message appears: Do you want to run multiple bshells to speed up the installation? No 7 Type No and press ENTER. A warning appears that informs you that you must remove all processes that use shared memory. You must stop the Baan IVc4 environment before you start the Tools package update. If you did not do so, you must use the rc.stop command to stop the environment now. 8 Type Yes and press ENTER to continue. The following message appears: Are you ready for installation? 9 Type Yes and press ENTER. A Check Fixes error message can appear, which indicates that the preinst preinstallation tool encountered errors. If so, check the displayed Log.preinst file. 10 Press ENTER to continue. 11 Return to Chapter 1, Installation and Deployment Procedure for Baan IVc4, in this document and continue with Step 4.

18 2-6 Language Update on Unix

19 Chapter 3 Language Update on Windows 3 This chapter describes how to update an existing SSA Baan IV environment with a language on a Windows 2000 or Windows 2003 system. Note: Before you start the update, notify the SSA One point Online support Services, who can provide you with the latest information about the update. The installation order: You have installed, for example, US English with the new master medium. During this standard installation, you have already chosen the appropriate locale, for example, Brazilian / ISO , for the update language CD- ROM. However, if you want to install a language that requires multibyte, you must already have selected Multibyte in Native Format during the standard install. To install a new language, take the following steps: 1 Log on as user baan. 2 Close all running applications. 3 Insert the Master distribution CD-ROM for Baan IVc4 in the CD-ROM drive. 4 The Welcome screen appears automatically. Click Next. Note: If you must perform a manual launch of the Baan installation program, on an Intel platform, click Setup.exe in the I386 subdirectory of the SSA Baan installation CD-ROM.

20 3-2 Language Update on Windows The Software License Agreement dialog box appears. 5 Click Yes to accept the license agreement. The Choose Installation Source dialog box appears: 6 Select the medium you want to use for installation. In this case, click Install from Another (Update) CD. 7 Click Next. A question appears. 8 Replace the master CD-ROM with the update CD-ROM, select the correct directory in which the update software is placed from the Directories box, and click OK to continue.

21 Language Update on Windows 3-3 The Select Environment dialog box appears: 9 Click Select Existing Environment, choose the environment you want to update, and click Next. The Baan User Password dialog box appears:

22 3-4 Language Update on Windows 10 Type baan in the Password box and click Next. The Update Configurations dialog box appears: 11 Select the required update configuration and click Next. The Setup Information dialog box appears. 12 Click Next. The import of the data dictionary now starts. As soon as the import is complete, an information screen appears that informs you that the import is finished. 13 Click OK to complete the language update. 14 Return to Chapter 1, Installation and deployment procedure, and continue with Step 4