PCA TUBE SYSTEM Assembly, Usage, and Parts MANUAL
|
|
- Margery Watts
- 5 years ago
- Views:
Transcription
1 P TUE SYSTEM ssembly, Usage, and Parts MNUL For ordering New Systems or Replacement Parts Please ontact: Penny Or 7-7- Or service@hallindustries.com Mecklem Lane Ellwood ity, P 67 May, Revision 00 Manufacturing Solutions Since 966 Page
2 0. Index Section escription Page One Specifications Two Operating Procedures Three Preventive Maintenance Four Replacement Part Kits / ssemblies Five Ordering Info Six ttachment List. Specifications.. Physical Specifications Part Number escription px. Weight Ship Length HT-00P- P Tube Hose System 900 HT-00P- P Tube Hose System 0 HT-00P- P Tube Hose System Shipping Info ontact Hall Industries Inc. to estimate shipping requirements... Warranty: ll parts are guaranteed against defects for one year. If at any time this manual is not followed it will void the warranty (preventive maintenance logs are required for all warranty replacement parts). ll replacement parts must be genuine Hall Industries parts.. Operating Procedures NOTE: This must be done in accordance with the corresponding aircraft & bridge manual... Inspect the P System (visually inspect):... heck for a bent or damaged frame and for worn or missing parts.... heck tires for damage.... heck that hose clamps are tight.... heck that the air inlet adapter is not damaged. NOTE: O NOT attempt to service any aircraft with a damaged air inlet adapter... Responsibility Manufacturing Solutions Since 966 Page
3 ... Operator of the system must understand that it is his/her responsibility to move the system safely around the aircraft the entire time it is in use... Hooking Up to the Plane ~ hecks:... Is the aircraft high enough to clear the system... ttach the System to the ircraft... Release the clip on the retention chain.... Grab handrail on the last tube and deploy.... Grab the air inlet adapter and pull the layflat hose out to the connection point on the aircraft.... onnect using the Hall Industries Inc. air inlet adapter. NOTE: This must be done in accordance with the corresponding aircraft & bridge manual... isconnect the System from the ircraft... isconnect the air inlet adapter.... Lay the lay-flat hose on top of the last hose tube section.... ollapse the tube system.... Reattach the chain and retention clip. Manufacturing Solutions Since 966 Page
4 . Preventive Maintenance NOTE: Hall Industries recommends using this maintenance procedure bi-annually (or as required in your airlines maintenance procedure if sooner). Replace worn or damaged parts as needed... heck wheels and frame for bent, broken, or worn parts and security... Grease the wheels and the hitch connection ball... heck wear pads (located under the hose elbows)... heck all hardware that nothing has loosened... Inspect air inlet adapter for worn or damaged parts..6. lean, repaint or touch-up paint as required..7. Make sure Hall Industries Inc. tag is intact.. Replacement Part / Kits / ssembly Info.. See ttachments Section for detailed ssembly rawings.. IVF/FFPH0 LYFLT UT Required.. IVF/PREX0 LYFLT REUER Required.. IVF/FLEXLINKV FLEX LINK Optional.. V P HOSE SWIVEL Optional.6. HT-00P-HS HET SHIEL Optional.7. ustom Frames are available if required.. Ordering Info.. ccepted Payments Include (but not limited to):... Visa Manufacturing Solutions Since 966 Page
5 ... Masterard... merican Express... ompany heck Wire Transfer.. Standard terms ~ NET 0 with approved credit.. Minimum Orders ~ $0.. The Order Form is listed in the attachments of this document. 6. ttachment List 6.. HT-00P P HOSE TUE SSEMLY 6.. HT-00P-000- P TUE FRME SSEMLY 6.. HT-00P- P HOSE TUE SSEMLY 6.. HT-00P-000- P TUE FRME SSEMLY 6.. HT-00P-000 FIRST TUE 6.6. HT-00P-000 MILE TUE ( tube system will not have, tube system will have ) 6.7. HT-00P-000 LST TUE 6.. HT-00P--00 UMPER SSEMLY 6.9. HT-00P-WP-KIT P ELOW WER P KIT 6.0. HT-00P-000 HRWRE STK 6.. I-90 IR INLET PTER ~ LUMINUM 6.. I-90-N IR INLET PTER ~ NYLON 6.. Order Form 6.. Other Products and ustom esign Services Manufacturing Solutions Since 966 Page
6 THREE TUE SYSTEM Manufacturing Solutions Since 966 Page
7 NOTES: 7 6 THREE TUE SYSTEM. SEE SUSSEMLY RWINGS FOR MORE ETIL.. NOT SHOWN: IVF/FFPH0 LYFLT UT IVF/PREX0 LYFLT REUER IVF/FLEXLINKV FLEX LINK V0 000 P HOSE SWIVEL HT 00P HS HE SHIEL. LY FLT UT N IR INLET PTER RE NOT SHOWN UT ONNET TO THE EN OF THE LST TUE WITH LMPS. ISIONS ESRIPTION TE Y HK 00 HLL INUSTRIES, IN. LL RIGHTS RESERVE. HLL INUSTRIES, IN. PROPRIETRY RIGHTS RE INLUE IN THE INFORMTION ISLOSE HEREIN. REIPIENT, Y EPTING THIS OUMENT, GREES THT NEITHER THIS OUMENT NOR THE INFORMTION ISLOSE HEREIN NOR NY PRT THEREOF SHLL E REPROUE OR TRNSFERRE TO OTHER OUMENTS OR USE OR ISLOSE TO OTHERS FOR MNUFTURING OR FOR NY OTHER PURPOSE EXEPT S SPEIFILLY UTHORIZE IN WRITING Y HLL INUSTRIES, IN. SOLIWORKS 7 6 ITEM QTY PRT NUMER ESRIPTION HT 00P 000 FRME SSEMLY HOSE TUE HT 00P 000 FIRST TUE HT 00P 000 MILE TUE HT 00P 000 LST TUE UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES NGLE.XX.XXX ± 0. ±.0 ±.00 THIR NGLE PROJETION PROJET I V0 HEK TE //0 RWN JE TOLERNES TE //0 PROJET FILE NME ESRIPTION SIZE SLE : Mecklem ln Ellwood ity, P 67 V P TUE SSEMLY HT 00P P TUE SSEMLY P TUE SSEMLY WG/PRT NO. HT 00P WEIGHT:.96 LS SHEET OF LST SVE: /9/0 PRINTE:/9/0 0
8 NOTES: THE UPPER RM OF THIS SSEMLY N E ERSE IF NEEE. WEL OR OLT RKETS TO RIGE. SSEMLE THE HRWRE USING NTISEIZE. FOR TUE SYSTEM ISIONS ESRIPTION TE Y HK ETIL SLE : FOR TUE SYSTEM 00 HLL INUSTRIES, IN. LL RIGHTS RESERVE. HLL INUSTRIES, IN. PROPRIETRY RIGHTS RE INLUE IN THE INFORMTION ISLOSE HEREIN. REIPIENT, Y EPTING THIS OUMENT, GREES THT NEITHER THIS OUMENT NOR THE INFORMTION ISLOSE HEREIN NOR NY PRT THEREOF SHLL E REPROUE OR TRNSFERRE TO OTHER OUMENTS OR USE OR ISLOSE TO OTHERS FOR MNUFTURING OR FOR NY OTHER PURPOSE EXEPT S SPEIFILLY UTHORIZE IN WRITING Y HLL INUSTRIES, IN. SOLIWORKS ITEM QTY PRT NUMER ESRIPTION MTERIL 7T6 HITH HRWRE HT 00P 00 SWIVEL STER HRWRE HT 00P 00 SP SPER FOR STER LUMINUM 606 T6 HT 00P 00 HOSE TUE FRME N/ HT 00P 00 E NGLE RKET STEEL 6 6 HT 00P 00 UPPER ONTIN TUE TUING STM STEEL 7 HT 00P 00 LOWER ONTIN TUE TUING STM STEEL HT 00P 00 RE ONTIN TUE PIPE SH 0 STEEL 9 HT 00P 600 ONTIN TUE RKET STEEL 6 0 HT 00P 90 MIN MOUNT RKET STEEL 6 HT 00P 90 HIN HRWRE HT 00P 90 SPRING LIP HRWRE HW HRWRE STK N/ HW HRWRE STK N/ HW HRWRE STK N/ 6 HW HRWRE STK N/ 7 HW HRWRE STK N/ HW HRWRE STK 7 N/ UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES NGLE.XX.XXX ± 0. ±.0 ±.00 THIR NGLE PROJETION PROJET I V0 HEK TE //0 RWN JE TOLERNES TE //0 PROJET FILE NME ESRIPTION SIZE SLE : Mecklem ln Ellwood ity, P 67 V~ P HOSE TUE HT 00P 000 FRME SSEMLY HOSE TUE FRME SSEMLY HOSE TUE WG/PRT NO. HT 00P 000 WEIGHT:. LS SHEET OF LST SVE: /9/0 PRINTE:/9/0 0
9 TWO TUE SYSTEM Manufacturing Solutions Since 966 Page
10 NOTES: 7 6. SEE SUSSEMLY RWINGS FOR MORE ETIL.. NOT SHOWN: IVF/FFPH0 LYFLT UT IVF/PREX0 LYFLT REUER IVF/FLEXLINKV FLEX LINK V0 000 P HOSE SWIVEL HT 00P HS HE SHIEL. LY FLT UT N IR INLET PTER RE NOT SHOWN UT ONNET TO THE EN OF THE LST TUE WITH LMPS. TWO TUE SYSTEM ISIONS ESRIPTION TE Y HK 00 HLL INUSTRIES, IN. LL RIGHTS RESERVE. HLL INUSTRIES, IN. PROPRIETRY RIGHTS RE INLUE IN THE INFORMTION ISLOSE HEREIN. REIPIENT, Y EPTING THIS OUMENT, GREES THT NEITHER THIS OUMENT NOR THE INFORMTION ISLOSE HEREIN NOR NY PRT THEREOF SHLL E REPROUE OR TRNSFERRE TO OTHER OUMENTS OR USE OR ISLOSE TO OTHERS FOR MNUFTURING OR FOR NY OTHER PURPOSE EXEPT S SPEIFILLY UTHORIZE IN WRITING Y HLL INUSTRIES, IN. SOLIWORKS 7 6 ITEM QTY PRT NUMER ESRIPTION HT 00P 000 FRME SSEMLY HOSE TUE HT 00P 000 FIRST TUE HT 00P 000 LST TUE UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES NGLE.XX.XXX ± 0. ±.0 ±.00 THIR NGLE PROJETION PROJET I V0 HEK TE //0 RWN JE TOLERNES TE //0 PROJET FILE NME ESRIPTION SIZE SLE : Mecklem ln Ellwood ity, P 67 V P TUE SSEMLY HT 00P P TUE SSEMLY P TUE SSEMLY WG/PRT NO. HT 00P WEIGHT: 0.7 LS SHEET OF LST SVE: /9/0 PRINTE:/9/0 0
11 NOTES: THE UPPER RM OF THIS SSEMLY N E ERSE IF NEEE. WEL OR OLT RKETS TO RIGE. SSEMLE THE HRWRE USING NTISEIZE. FOR TUE SYSTEM ISIONS ESRIPTION TE Y HK ETIL SLE : FOR TUE SYSTEM 00 HLL INUSTRIES, IN. LL RIGHTS RESERVE. 6 HLL INUSTRIES, IN. PROPRIETRY RIGHTS RE INLUE IN THE INFORMTION ISLOSE HEREIN. REIPIENT, Y EPTING THIS OUMENT, GREES THT NEITHER THIS OUMENT NOR THE INFORMTION ISLOSE HEREIN NOR NY PRT THEREOF SHLL E REPROUE OR TRNSFERRE TO OTHER OUMENTS OR USE OR ISLOSE TO OTHERS FOR MNUFTURING OR FOR NY OTHER PURPOSE EXEPT S SPEIFILLY UTHORIZE IN WRITING Y HLL INUSTRIES, IN. SOLIWORKS ITEM QTY PRT NUMER ESRIPTION MTERIL 7T6 HITH HRWRE HT 00P 00 UPPER ONTIN TUE TUING STM STEEL HT 00P 00 LOWER ONTIN TUE TUING STM STEEL HT 00P 00 RE ONTIN TUE PIPE SH 0 STEEL HT 00P 00 SWIVEL STER HRWRE 6 HT 00P 00 SP SPER FOR STER LUMINUM 606 T6 7 HT 00P 00 HOSE TUE FRME N/ HT 00P 00 E NGLE RKET STEEL 6 9 HT 00P 600 ONTIN TUE RKET STEEL 6 0 HT 00P 90 MIN MOUNT RKET STEEL 6 HT 00P 90 HIN HRWRE HT 00P 90 SPRING LIP HRWRE HW HRWRE STK N/ HW HRWRE STK N/ HW HRWRE STK N/ 6 HW HRWRE STK N/ 7 HW HRWRE STK N/ HW HRWRE STK 7 N/ UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES NGLE.XX.XXX ± 0. ±.0 ±.00 THIR NGLE PROJETION PROJET I V0 HEK TE //0 RWN JE TOLERNES TE //0 PROJET FILE NME ESRIPTION SIZE SLE : Mecklem ln Ellwood ity, P 67 V~ P HOSE TUE HT 00P 000 FRME SSEMLY HOSE TUE FRME SSEMLY HOSE TUE WG/PRT NO. HT 00P 000 WEIGHT:. LS SHEET OF LST SVE: /9/0 PRINTE:/9/0 0
12 ISIONS ESRIPTION TE Y HK NOTES:.. THE HITH POINT OF THIS SSEMLY N E ERSE IF NEEE. SSEMLE THE HRWRE USING NTISEIZE. 6 MKE SURE IRFLOW IS ORRET ITEM QTY PRT NUMER ESRIPTION Material 7T TRILER LL HRWRE HT 00P 00 WHITE PV " x 7' 6" LONG PV HT 00P 0 ELOW PV 90 EG INH PV HT 00P 00 SWIVEL STER HRWRE HT 00P 00 SP SPER FOR STER LUMINUM 606 T6 6 HT 00P 00 UMPER SSEMLY N/ 7 HT 00P 700 LL MOUNT RKET STEEL 6 HT 00P 00 HOSE TUE SLE STEEL 6 9 HT 00P " LMPO LMP HRWRE 0 HT 00P " LMPO LMP HRWRE HT 00P WP KIT P ELOW WER P KIT N/ 6 HW HRWRE STK 6 N/ IVF/ISX0X0L P WIRE REINFORE UT ELOW SPIRL WOUN HOSE LL MOUNT RKKET IS INSERTE ETWEEN UPPER N LOWER LMPS 7 UMPER SSEMLY IS INSERTE ETWEEN UPPER N LOWER LMPS ETIL SLE : 0 0 PUNH HOLE IN ELOW FOR WER SSEMLY 00 HLL INUSTRIES, IN. LL RIGHTS RESERVE. HLL INUSTRIES, IN. PROPRIETRY RIGHTS RE INLUE IN THE INFORMTION ISLOSE HEREIN. REIPIENT, Y EPTING THIS OUMENT, GREES THT NEITHER THIS OUMENT NOR THE INFORMTION ISLOSE HEREIN NOR NY PRT THEREOF SHLL E REPROUE OR TRNSFERRE TO OTHER OUMENTS OR USE OR ISLOSE TO OTHERS FOR MNUFTURING OR FOR NY OTHER PURPOSE EXEPT S SPEIFILLY UTHORIZE IN WRITING Y HLL INUSTRIES, IN. SOLIWORKS 7 6 UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES NGLE.XX.XXX ± 0. ±.0 ±.00 THIR NGLE PROJETION PROJET I V0 HEK TE //0 RWN JE TOLERNES TE //0 PROJET FILE NME ESRIPTION SIZE SLE : Mecklem ln Ellwood ity, P 67 V~ P TUE SYSTEM HT 00P 000 FIRST TUE FIRST TUE WG/PRT NO. HT 00P 000 WEIGHT:.9 LS SHEET OF LST SVE: /9/0 PRINTE:/9/0 0
13 ISIONS ESRIPTION TE Y HK MKE SURE IRFLOW IS ORRET NOTES: 9.. THE HITH POINT OF THIS SSEMLY N E ERSE IF NEEE. SSEMLE THE HRWRE USING NTISEIZE. ITEM QTY PRT NUMER ESRIPTION Material HT 00P 00 WHITE PV " x 7' 6" LONG PV HT 00P 00 SWIVEL STER HRWRE HT 00P 00 SP SPER FOR STER LUMINUM 606 T6 HT 00P 00 UMPER SSEMLY N/ HT 00P 00 HOSE TUE SLE STEEL 6 6 HT 00P " LMPO LMP HRWRE 7 HT 00P " LMPO LMP HRWRE HT 00P WP KIT P ELOW WER P KIT N/ 9 6 HW HRWRE STK 6 N/ 0 IVF/ISX0X0L P WIRE REINFORE UT ELOW SPIRL WOUN HOSE UMPER SSEMLY IS INSERTE ETWEEN UPPER N LOWER LMPS ETIL SLE : PUNH HOLE IN ELOW FOR WER SSEMLY 00 HLL INUSTRIES, IN. LL RIGHTS RESERVE. HLL INUSTRIES, IN. PROPRIETRY RIGHTS RE INLUE IN THE INFORMTION ISLOSE HEREIN. REIPIENT, Y EPTING THIS OUMENT, GREES THT NEITHER THIS OUMENT NOR THE INFORMTION ISLOSE HEREIN NOR NY PRT THEREOF SHLL E REPROUE OR TRNSFERRE TO OTHER OUMENTS OR USE OR ISLOSE TO OTHERS FOR MNUFTURING OR FOR NY OTHER PURPOSE EXEPT S SPEIFILLY UTHORIZE IN WRITING Y HLL INUSTRIES, IN. SOLIWORKS 7 6 UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES TOLERNES NGLE.XX.XXX ± 0. ±.0 ±.00 THIR NGLE PROJETION PROJET I V0 HEK TE //0 RWN JE TE //0 PROJET FILE NME ESRIPTION SIZE SLE : Mecklem ln Ellwood ity, P 67 V~ P TUE SYSTEM HT 00P 000 MILE TUE MILE TUE WG/PRT NO. HT 00P 000 WEIGHT:.9 LS SHEET OF LST SVE: /9/0 PRINTE:/9/0 0
14 ISIONS ESRIPTION TE Y HK NOTES:. THE HITH POINT OF THIS SSEMLY N E ERSE IF NEEE.. SSEMLE THE HRWRE USING NTISEIZE. ITEM QTY PRT NUMER ESRIPTION Material HT 00P 00 WHITE PV " x 7' 6" LONG PV 6 HT 00P 00 SWIVEL STER HRWRE 6 HT 00P 00 SP SPER FOR STER LUMINUM 606 T6 6 HT 00P 00 UMPER SSEMLY N/ 6 HT 00P 00 HOSE TUE SLE STEEL 6 6 HT 00P 900 HN RIL N/ 7 HT 00P " LMPO LMP HRWRE HT 00P " LMPO LMP HRWRE 9 HW HRWRE STK 6 N/ HNRIL SITS ON TOP OF UPPER LMP UMPER SSEMLY IS INSERTE ETWEEN UPPER N LOWER LMPS ETIL SLE : 00 HLL INUSTRIES, IN. LL RIGHTS RESERVE. HLL INUSTRIES, IN. PROPRIETRY RIGHTS RE INLUE IN THE INFORMTION ISLOSE HEREIN. REIPIENT, Y EPTING THIS OUMENT, GREES THT NEITHER THIS OUMENT NOR THE INFORMTION ISLOSE HEREIN NOR NY PRT THEREOF SHLL E REPROUE OR TRNSFERRE TO OTHER OUMENTS OR USE OR ISLOSE TO OTHERS FOR MNUFTURING OR FOR NY OTHER PURPOSE EXEPT S SPEIFILLY UTHORIZE IN WRITING Y HLL INUSTRIES, IN. SOLIWORKS 7 6 UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES Mecklem ln Ellwood ity, P 67 TOLERNES NGLE.XX.XXX ± 0. ±.0 ±.00 PROJET V~ P TUE SYSTEM THIR NGLE PROJETION FILE NME HT 00P 000 LST TUE PROJET I V0 HEK RWN JE TE //0 TE //0 ESRIPTION SIZE SLE : LST TUE WG/PRT NO. HT 00P 000 WEIGHT:.0 LS SHEET OF LST SVE: /9/0 PRINTE:/9/0 0
15 NOTES:. SSEMLE USING NTI SEIZE. ISIONS ESRIPTION TE Y HK 00 HLL INUSTRIES, IN. LL RIGHTS RESERVE. HLL INUSTRIES, IN. PROPRIETRY RIGHTS RE INLUE IN THE INFORMTION ISLOSE HEREIN. REIPIENT, Y EPTING THIS OUMENT, GREES THT NEITHER THIS OUMENT NOR THE INFORMTION ISLOSE HEREIN NOR NY PRT THEREOF SHLL E REPROUE OR TRNSFERRE TO OTHER OUMENTS OR USE OR ISLOSE TO OTHERS FOR MNUFTURING OR FOR NY OTHER PURPOSE EXEPT S SPEIFILLY UTHORIZE IN WRITING Y HLL INUSTRIES, IN. SOLIWORKS HT 00P 00 NGLE UMPER RKET HT 00P 0 UMPER PLTE HT 00P 00 HOLLOW UL UMPER HW HRWRE STK UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES Mecklem ln Ellwood ity, P 67 TOLERNES NGLE.XX.XXX ± 0. ±.0 ±.00 PROJET V~ P TUE SYSTEM THIR NGLE PROJETION FILE NME HT 00P 00 UMPER SSEMLY PROJET I V0 ESRIPTION UMPER SSEMLY HEK TE SIZE WG/PRT NO. //0 RWN JE ITEM QTY. PRT NUMER ESRIPTION TE //0 HT 00P 00 SLE : WEIGHT:.0 LS SHEET OF LST SVE: /9/0 PRINTE: /9/0 0
16 NOTES:. THIS IS TYPILLY SSEMLE WITH THE UT PRIOR TO SHIPPING. ISIONS ESRIPTION TE Y HK 00 HLL INUSTRIES, IN. LL RIGHTS RESERVE. HLL INUSTRIES, IN. PROPRIETRY RIGHTS RE INLUE IN THE INFORMTION ISLOSE HEREIN. REIPIENT, Y EPTING THIS OUMENT, GREES THT NEITHER THIS OUMENT NOR THE INFORMTION ISLOSE HEREIN NOR NY PRT THEREOF SHLL E REPROUE OR TRNSFERRE TO OTHER OUMENTS OR USE OR ISLOSE TO OTHERS FOR MNUFTURING OR FOR NY OTHER PURPOSE EXEPT S SPEIFILLY UTHORIZE IN WRITING Y HLL INUSTRIES, IN. SOLIWORKS HT 00P WP P ELOW WER P HT 00P WP P ELOW WER P NYLON OLT 97 HT 00P WP P P ELOW WER P OTTER PIN HT 00P WP N P ELOW WER P NUT 96 PRT NUMER ESRIPTION UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES Mecklem ln Ellwood ity, P 67 TOLERNES NGLE.XX.XXX ± 0. ±.0 ±.00 PROJET V~ P TUE SYSTEM THIR NGLE PROJETION FILE NME HT 00P WP KIT P ELOW WER P KIT PROJET I V0 ESRIPTION P ELOW WER P KIT HEK TE SIZE WG/PRT NO. //0 RWN JE ITEM QTY PRT NUMER ESRIPTION TE //0 HT 00P WP KIT SLE : WEIGHT:. LS SHEET OF LST SVE: /9/0 PRINTE: /9/0 0
17 NOTES:. USE NTISEIZE. 7 6 " " ISIONS ESRIPTION TE Y HK " ITEM QTY HRWRE STK PRT NUMER H 0 0 ZP 0000 NY ZP 0000 UW 0000 ZP 0000 ESRIPTION " HH OLT /" x." LG GR ZP NUT NYLO. ZP FLT WSHER /" USS ZP HRWRE STK ITEM QTY PRT NUMER ESRIPTION H 0 00 ZP 0000 HH OLT /" x.7 LG GR ZP NY ZP 0000 NUT NYLO. ZP UW 0000 ZP 0000 FLT WSHER /" USS ZP " HRWRE STK ITEM QTY PRT NUMER ESRIPTION HX ZPG HH OLT /" x " LG GR ZP NY ZP 0000 NUT NYLO. ZP UW 0000 ZP 0000 FLT WSHER /" USS ZP " " " " HRWRE STK " ITEM QTY PRT NUMER ESRIPTION H ZP 00G HH OLT /" x." LG GR ZP NY ZP 0000 NUT NYLO. ZP UW 0000 ZP 0000 FLT WSHER /" USS ZP HRWRE STK 6 " HRWRE STK 6 ITEM QTY PRT NUMER ESRIPTION ITEM QTY PRT NUMER ESRIPTION HX 0 00 YZ 0000 HH OLT /6" x." LG ZP HX 0 0 YZ 0000 HH OLT /6" x " LG ZP NY ZP 0000 NUT NYLO /6" ZP NY ZP 0000 NUT NYLO /6" ZP WH ZP 00G FLT WSHER /6" USS ZP WH ZP 00G FLT WSHER /6" USS ZP 6 " " " ITEM QTY PRT NUMER HRWRE STK 7 ESRIPTION T 60 HH OLT /" x " LG GR ZP NY ZP 0000 NUT NYLO. ZP 00 HLL INUSTRIES, IN. LL RIGHTS RESERVE. HLL INUSTRIES, IN. PROPRIETRY RIGHTS RE INLUE IN THE INFORMTION ISLOSE HEREIN. REIPIENT, Y EPTING THIS OUMENT, GREES THT NEITHER THIS OUMENT NOR THE INFORMTION ISLOSE HEREIN NOR NY PRT THEREOF SHLL E REPROUE OR TRNSFERRE TO OTHER OUMENTS OR USE OR ISLOSE TO OTHERS FOR MNUFTURING OR FOR NY OTHER PURPOSE EXEPT S SPEIFILLY UTHORIZE IN WRITING Y HLL INUSTRIES, IN. SOLIWORKS 7 " 6 HRWRE STK 6 " ITEM QTY PRT NUMER ESRIPTION HT 00P 000 HH OLT /6" x." LG ZP WH ZP 00G FLT WSHER /6" USS ZP NY ZP 0000 NUT NYLO /6" ZP UNLESS OTHERWISE SPEIFIE IMENSIONS RE IN INHES NGLE.XX.XXX ± 0. ±.0 ±.00 THIR NGLE PROJETION PROJET I V0 HEK TE //0 RWN JE TOLERNES TE //0 PROJET FILE NME ESRIPTION SIZE SLE : Mecklem ln Ellwood ity, P 67 V ~ P TUE SYSTEM HT 00P 000 HRWRE STK HRWRE STK WG/PRT NO. HT 00P 000 WEIGHT: 0. LS SHEET OF LST SVE: /9/0 PRINTE:/9/0 0
18 HLL! Technical Services, LL P INLET PTER - LUMINUM The GSE Problem Solvers FETURES Molded EPM Gasket is service proven to last for years. Stainless Steel screen insert to keep debris from entering aircraft. omplete ssembly Part #I-90 P dapter/ onnector Fits T Standard Flange Fits Standard Hose Rotary am ction Latch Handles No exposed linkages, springs, or bolts Eliminates FO Minimizes moving parts Molded EPM Gasket Weighs less than pounds Protects duct from damage year warranty on Latch Handle asting US Patent No OMPONENTS The word LOK is cast into the handles. Provides added safety as ramp service staff can check locked position. Hall Part #90--00K Handle Housing Replacement Fits right or left side, includes () bolts, () Nord-Lock washer sets and Rubber Grip Handle Hall Part # ase Ring ssembly with Gasket Includes the gasket attached to the base Rotary am ction Latch Handles with Slot Filling Latch. For more information please visit us online at call us at , or us at info@halltechservices.com P INLET PTER - LUMINUM
19 HLL! Technical Services, LL P INLET PTER - NYLON The GSE Problem Solvers FETURES Molded EPM Gasket is service proven to last for years. Stainless Steel screen insert to keep debris from entering aircraft. omplete ssembly Part #I-90-N P dapter/ onnector Fits T Standard Flange Fits Standard Hose High impact resistant polymer Impact tested for durability Rotary am ction Latch Handles No exposed linkages, springs, or bolts Eliminates FO Minimizes moving parts Molded EPM Gasket Weighs less than pounds Protects duct from damage -year Warranty on Latch Handle asting OMPONENTS The word LOK is cast into the handles. Provides added safety as ramp service staff can check locked position. Hall Part #90--00K Handle Housing Replacement Fits right or left side, includes () bolts, () Nord-Lock washer sets and Rubber Grip Handle Hall Part #90--00P ase Ring ssembly with Gasket Includes the gasket attached to the base Rotary am ction Latch Handles with Slot Filling Latch. For more information please visit us online at call us at , or us at info@halltechservices.com P INLET PTER - NYLON
20 Hall Industries Equipment ivision ~ IRLINE ORERS FX#: 7 7 PHONE # : ORER TE: TKEN Y: TIME: IRLINE OE: PERSON LLING: PHONE#: FX: E MIL RESS: USTOMER P.O.# MSTER R# EXP. TE: V# SHIP TE: HOW TO SHIP: UPS: GR RE OTHER FE EX: GR O/N O/N P OTHER cct. # TRUKING OMPNY: HU : EMPLOYEE # ILLING RESS: SHIP TO RESS: PRT NUMER: ESRIPTION: QTY: PRIE: NOTES:
21 Other Products and ustom esign Services: Hall Industries provides a number of additional products beyond our towbar line. Some of the custom projects that we have done are shown below. We have our own engineering staff along with machine, fabrication, and GSE maintenance shops. We can design and build your ideas to increase safety, productivity, and profits ustom Towbar (Solve a Problem) <<This project involved designing and manufacturing a custom towbar to be used in the Nuclear Industry. This towbar shipped complete with custom shear pins calibrated to the application. I-90 Preconditioned ir Inlet (P) dapters << Our P Inlet dapters are part of our GSE product line. We inventory all of the parts and can ship usually the same day as ordered.>> ertified Transmission Lifting racket (Meet a emand) customer came to us with a lifting problem. They needed a tested and certified lifting bracket to prevent them from getting cited by OSH. We designed, tested, and fabricated a solution. >> << dapter to Tronair Hydro dapter ssembly>> Hall Industries offers adapters for nearly every towbar (even competitors) that allow you to use our towbar tubes / heads with your existing equipment. esides the products listed above some of the other things that we sell include P ducting, Solid P tires, and baggage cart tires. Feel free to contact us about your GSE problems; after all we are The Problem Solvers. Manufacturing Solutions Since 966 Page
PCA TUBE SYSTEM Assembly, Usage, and Parts MANUAL
P TUE SYSTEM ssembly, Usage, and Parts MNUL For ordering New Systems or Replacement Parts Please ontact: Phone @ 000 Or Fax @ Or Email @ service@hallindustries.com Mecklem Lane Ellwood ity, P October,
More informationANY EQUIVALENT AVIATION GRADE HARDWARE MAY BE USED. Detail A HEAT SHIELD SEE PAGE 5 FOR ASSEMLBY B. Detail B. Detail C A. Detail D
ISIONS ESRIPTION TE THIS IS ONLY PPLILE TO PFS-0 THIS IS ONLY PPLILE TO POWERFLOW S/N 0, 0 N HIGHER, UNLESS EXHUST HS EEN ONVERTE TO THIS ONFIGURTION. 0 etail HET SHIEL SEE PGE FOR SSEMLY etail 9 0 etail
More informationTHIS IS ONLY APPLICABLE ON MOONEY M20 J MODELS THIS IS PFS GEN1 ALL PFS S/N 117 & BELOW
THIS IS ONLY PPLILE ON MOONEY M0 J MOELS THIS IS PFS-0-GEN LL PFS-0 S/N & ELOW RIPTION ISIONS TE etail 9 MY HVE OPTIONL LOPRTI HEERS INSTLLE 9 etail ONLY PPLILE ON IRRFT WITH ELETRI OWL FLP 0 0 9 9 0 0
More informationTHIS IS ONLY APPLICABLE TO PFS SYSTEM IN THE CLASSIC CONFIGURATION
ISIONS RIPTION TE THIS IS ONLY PPLILE TO PFS-0 SYSTEM IN THE LSSI ONFIGURTION etail etail 9 etail 0 etail NY EQUIVLENT VITION GRE HRWRE MY E USE TOLERN EXEPT S NOTE X.X -- `0. 0 -- `_ X.XX -- `0.0 0.0_
More informationPRELIMINARY ISOMETRIC VIEW SCALE 8: ISOMETRIC VIEW SCALE 8: ISOMETRIC VIEW SCALE 8:1 GASKET FLANGE EXTERNAL
THIS RWING IS UNPULISHE. OPYRIGHT Y RELESE FOR PULITION LL RIGHTS RESERVE. P LTR ESRIPTION TE WN PV 4 REVISE 04UG JV E TOP GE EXTERNL EMI GSKET GSKET FLNGE UPTE VIEWS 9SEP JV E UPTE VIEWS 0FE JV E UPTE
More informationOPTIONAL OSD REMOTE P/N E (1 INCLUDED WITH TOUCHMONITOR)
PROPRIETRY TO ELO TOUH SOLUTIONS, IN. N SHLL NOT E ISLOSE OTHER THN TO NEESSRY EMPLOYEES OR SUPPLIERS WITHOUT THE EXPRESS WRITTEN ONSENT OF ELO TOUH SOLUTIONS IN. Y ISIONS ESRIPTION -- KJN INITIL RELESE
More informationPART NUMBER THIS DRAWING IS A CONTROLLED DOCUMENT. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009 DIMENSIONS: mm
THIS RWING IS UNPULISHE. OPYRIGHT 0 RELESE FOR PULITION 0 LO GP LL RIGHTS RESERVE. Y IST 00 P LTR HET SINK X LIGHT PIPE ESRIPTION TE WN PV RELESE TO PROUTION PR0 KQ SH REVISE PER EO0 FE0 JW SH REVISE PER
More informationNOTES UNLESS OTHERWSE SPEIFIE,. 0.00 E N. 0.00 NILOX FE MX PRINT WITH =.. 0.00 E N ITEM ESRIPTION PRT NUMER QTY. UOM NOTES SSY, HMER, V. HiFlow 90SYSS E. SSEMLY ROSS SHFT 90SYSS E. METRI IR YLINER, RHS
More informationA TROUGH WIDTH PRESS FRAME WIDTH
NOTES UNLESS OTHERWSE SPEIFIE,. 0.00 E N. 0.00 NILOX FE MX PRINT WITH =.. 0.00 E N ITEM ESRIPTION PRT NUMER QTY. UOM NOTES SSY, HMER, V. HiFlow HSYSS E. SSEMLY ROSS SHFT HSYSS E. METRI IR YLINER, LHS HSYSS0
More informationTEE-STL BLK 1/2" (SCH 80) TEE-STL BLK 1/2" REGULATOR-TWO STAGE REGULATOR-TWO STAGE
RELESE TE WG 00-0-000 PIPE-STL LK /" (SH 0) ZONE ISION REOR TE FTR-ORIG 00-0-000 TUING-OPPER /" O T- 00-0-000 TEE-STL LK /" (SH 0) 00-0-000 TUING-OPPER /" O T- 00-0-000 TEE-STL LK /" 00-0-000 PIPE-STL
More informationPRESSWHEEL DUAL 125 WEDGE PRESSWHEEL DUAL 150 WEDGE
PRESSWHEEL SINGLE WEGE PRESSWHEEL UL WEGE PRESSWHEEL SINGLE WIE PRESSWHEEL UL 0 WEGE GROWPLOW OPYRIGHT RESERVE THIS RWING IS THE PROPERTY GROWPLOW PTY LT, N IS SULET TO RETURN UPON EMN. IT IS SUMITTE FOR
More informationTEE-STL BLK 1/2" (SCH 80) TEE-STL BLK 1/2" REGULATOR-TWO STAGE REGULATOR-TWO STAGE
RELESE TE WG 00-0-000 PIPE-STL LK /" (SH 0) ZONE ISION REOR TE FTR-ORIG 00-0-000 TUING-OPPER /" O T- 00-0-000 TEE-STL LK /" (SH 0) 00-0-000 TUING-OPPER /" O T- 00-0-000 TEE-STL LK /" 00-0-000 PIPE-STL
More informationROADWARRIOR SAFETY WALKRAMP
ROWRRIOR SFETY WLKRMP & RRIER PRTS MNUL FM-.-9 Rev L 0-9- Toll: 00--9 00 East rd Street www.romcorp.com Phone: --000 elton, Missouri 0 orders@romcorp.com Fax: --00 FM-.-9 / Rev L / 0-9- ONTENTS ROWRRIOR
More informationCENTER/REVERSED OUTER ,
8 THIS RWING IS UNPULISHE. OPYRIGHT RELESE FOR PULITION Y LO IST GP LL RIGHTS RESERVE. 00 P LTR GE SSEMLY GSKET FLNGE EMI GSKET. ONTT HIKLET HIKLET LIGNMENT LIP SLE EMI SPRINGS REVISE PER EO0089 0UG PP
More informationSIDEKICK FOLDING RAMP
R O M SIEKIK FOLING RMP & RRIERS PRTS MNUL FM-.-0 Rev M 0-- Toll: 00-- 00 East rd Street Phone: --000 elton, Missouri 0 orders@romcorp.com Fax: --00 FM-.-0 / Rev M / 0-- SIEKIK FOLING RMP & RRIERS Parts
More informationA & LIFT BASE INFORMATION HEIGHT DIM A MM [INCH]
9 [ ] 9 [ ] 0 [ 9 ] [ ] 0 [ 9 ] [ ] 9 [ ] 9 [ ] LTERNTOR EN [ ] RITOR EN X 09 [ 9. ] X [ 9. ] FIXE IR INTKE LOUVER (STNR) X [ 0.0 ] OUTLET SILENER 0 [ ] [ 9 ] OOR REMOVE 0 [ 9 ] INTKE ESS 9 [ ] [ 0 ] 9
More informationES 00 NTS 1 5 A7 RAST 2.5 TAB HEADER ASSY TH, VERTICAL, EXTERNAL LOCKING
2 THIS RWING IS UNPULISHE. OPYRIGHT 2 Y RELESE FOR PULITION LL RIGHTS RESERVE. 2 LO IST ES P LTR ESRIPTION TE WN PV ER2 JUN2 M.T YH.M.2 2. ER NOV2 GRZ T ER MY2 WW RR NOTE SEE SHEET FOR VILLE ONFIGURTIONS
More informationBALL VALVE ACCESSORIES
000 Retrofit Kits Easily converts any system over to all 000 style valves for consistent valve type and uniform maintenance. Special extended socket style End onnectors () allow retrofit replacement of
More informationA23 ECR SEP2017 WW RR A24 ECR MAY2018 KD FL N#0.30
THIS RWING IS UNPULISHE. OPYRIGHT 0 Y RELESE FOR PULITION LL RIGHTS RESERVE. 0 LO IST ES 00 P LTR ESRIPTION TE WN PV ER0 SEP0 WW RR ER00 0MY0 K FL N#0.0 M#0.0 NOTE HOUSING HS RST OMPLINT KEYING, LTHING,
More informationSpecifications: Air Driven Tube Cutter P S RTM. (805)
Specifications: ir riven Tube utter The NEW 000 The new 000 lever actuated cutter was developed by PSR to internally cut non-ferrous and ferrous tubes within condensers, chillers and similar vessels with
More informationPREDATOR HD. Product Brochure. Dual lamp unit shown (covers SIR250SW, 250SWL and SIR275 products), other colours available.
PRETOR H Product rochure ual lamp unit shown (covers SIR50SW, 50SWL and SIR75 products), other colours available. Product rochure PRETOR H IP68 FULL 080P HIGH EFINITION VIEO High Speed High efinition Ruggedised
More informationRELEASE OF NEW 5 TOUCHSCREEN DISPLAY
RELESE OF NEW TOUHSREEN ISPLY LL 909 ESRIPTION SEKEEPER has designed a new touchscreen display that takes all of the features of the 3. display and incorporates them into a sleek new display that also
More informationCASS-TL4 PLAN VIEW CASS-TL4 ELEVATION VIEW (TYPICAL LAY-OUT)
/" (-) LENGTH OF NEE SS LE TERMINL (T): (REQUIRES PROTETION SEE NOTE.) EPRTURE INSTLLTION: LON IS T POST # (S SHOWN) PPROH INSTLLTION: LON IS " PST POST # LENGTH OF NEE T SS SS LE NHOR (): PPROH INSTLLTION:
More information6300 ON LAND PLOW ASSEMBLY & PARTS BOOK
00 ON LND PLOW SSEMLY & PRTS OOK HRRELL G PRODUCTS 0 Hugh Road Leesburg, Georgia Page of // TLE OF CONTENTS COVER PGE.. TLE OF CONTENTS 00 ON LND PLOW MIN SSEMLY. 00 ON LND PLOW MIN SSEMLY PRT LIST. HYDRULIC
More informationATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 & 4 of 4)
0 0 00_GT 0 0_GT _SIMP 0 0 0 0 00 0 00 0 00 0 _GT OUNR_0 0 0_EMPTY_OEN_SF 0 SIMP_0 0 0 0 0 0 00 0 000 _OL 0 0 0 0 0 0 0 00 0 0 0 0 SIMP_0 0 00 IM_ IM_ 0 00 0 OPYRIGHT 0 TLNTI VERSION RMINTOR INRFE PR Y
More informationATLANTIC VERSION Shown on sheets 1 of 4 & 2 of 4 (Pacific version shown on sheets 3 of 4 & 4 of 4)
000 000 W WG_WGUGE_ W WG_WGUGE_ W WG_WGUGE_ 0 0 W WG_RIMP_HT_ W WG_RIMP_HT_ W WG_RIMP_HT_ W WG_RIMP_HT_ W WG_RIMP_HT_ W WG_RIMP_HT_ 000 000 W F_SETTING_ W F_SETTING_ W F_SETTING_ W F_SETTING_ W F_SETTING_
More information2/9/ :05:00 AM -
R //0 0:0:00 M - & -P G, & -P G, -P G, & -P G, & -P G -P G,, & -P G &, -P G - ISIONS EN. ESRIPTION TE PP' -RERWN IN SOLIWORKS (SEE PIOUS ISION FOR NGE ETILS); -- TMS -REPLES FORM 00 N RWING 0 -UPTE LOKS,
More informationPOINT OPTIONS HARD FACING TUNGSTEN TIP PLAIN POINT COULTER OPTION REFER TO COULTER PARTS BOOK
ITEM 0 PRT NUMER -0-00 -00-0 -00-00 00-00 -0-00 00-00 -0 SHER PIN # SHIN GUR TO SUIT # SHNK HIRLIP OLT - /" x " UN G ZIN NUT HEX " UN ZIN OLT " x "UN G ZIN SHNK RRIER # SHER PIN SHNK # " WSHER SPRING "
More information9400 SWITCH PLOW ASSEMBLY & PARTS BOOK
00 SWITCH PLOW SSEMLY & PRTS OOK HRRELL G PRODUCTS 0 Hugh Road Leesburg, Georgia 7 Page of // TLE OF CONTENTS COVER PGE. TLE OF CONTENTS.. 00 SWITCH PLOW MIN SSEMLY 00 SWITCH PLOW MIN SSEMLY PRT LIST HYDRULIC
More informationMULTIPORT SERVICE TERMINALS (MST)
MULTIPORT SERVIE TERMINLS (MST) s (TE) FTTX infrastructure solutions are designed from the ground up to meet the unique requirements of FTTX networks. esigned for operational efficiency and scalability,
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM 560393 09//04 00666. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING ITEM NO. PRT NUMBER DESCRIPTION QTY. 545007 HDS-7 LIFT SUPERSTRUCTURE
More informationNOTE: UNLESS OTHERWISE SPECIFIED. 1. SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING
ISION DESCRIPTION DTE EDITED BY ECO# PRODUCTION RELESE, DERIVED FROM 560395 09//04 00666. SEE SHIPPING INSTRUCTIONS FOR FINL PCKGING ITEM NO. PRT NUMBER DESCRIPTION QTY. 5450 HDS-7X LIFT SUPERSTRUCTURE
More informationJUNIOR 360 MASTER PARTS LIST
THIS MTERIL IS THE PROPERTY OF MOLE MSTER SERVICES CORPORTION N MY NOT BE REPROUCE, PUBLISHE, OR ISCLOSE TO OTHERS WITHOUT WRITTEN UTHORIZTION N MY NOT BE USE IN NY WY GINST OR ETRIMENTL TO MOLE MSTER
More informationCopyright 2015 Winnebago Industries, Inc.
anger of electrical shock, burns or death. lways remove all power sources before attempting any repair, service or diagnostic work. Power can be present from shore power, generator, inverter or battery.
More informationDIGIPLAN presents. Portable Folding Chair. Unfolded View. Folded Side View. 2004/01/02 rev
WWW..DIGIPLN..C DIGIPLN presents Portable Unfolded View Folded Side View 00/0/0 rev.0 WWW..DIGIPLN..C We are offering these plans for no charge as an example of what you can expect when you purchase other
More informationVAREC 5000/5010. Flame Arresters
VREC 000/00 The 000/00 Series end-of-line flame arresters are used in gas piping systems, petroleum storage tank roofs and digester covers to prevent the propagation of a flame into the system. INTROUCTION
More informationNotes For Grade Five galvanized steel hardware, add "-GS5" to catalog number. EX: PSD400-7-V-AA-GS5
TYPE PSD-V-, PSD-V-H- olted us Support, Pipe, Slide or Tight Fit Double ring support is designed to be corona free for 345 kv and 500 kv service. Support is designed to be slip or tight fit depending on
More informationHDPE TECHNICAL INFORMATION
HP THNIL INFORMTION MULTIPLIR The following standard PowerSeal products have been evaluated and approved for use with high density polyethylene pipe based upon certain modifications and restrictions related
More informationThis pack contains: 1 desk stand kit. or 98 mm (3.8") 500 mm (19.7") 1206 mm (47.5") ADJUSTMENT mm (20" ") 427,5 mm (16.
This pack contains: desk stand kit DESK STND KIT WITH GLSS SE (FOR SREENS) SSEMLY ND INSTLLTION Designed to mount flat screen monitors up to " (widescreen) onto a desk The glass base is designed to hold
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL MEGABLADE TM V-WING TM SERIES SNOW PLOW WITH SERIAL NUMBER AFTER MBV00000 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International, Inc. ProControl, MegaBlade,
More informationWirewound Resistors Industrial Power, Tubular (HL), Non-Inductive Tubular (NHL)
HL, NHL Wirewound Resistors FETURES High temperature silicon coating omplete welded construction vailable in non-inductive styles (model NHL) with ryton-perry winding Tight tolerance of 5 % for values
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
More informationMETRIC. Gamma Vacuum BOTTOM VIEW MOUNTING HOLE PATTERN E 25S-XX-2V-XX
0 E WG. NO. SH. (. ) [.] THIS RWING HS EEN GENERTE N IS MINTINE Y PRO/ENGINEER SYSTEM. (. ) [.] (. ) [.] ( 0. ) [.] (. ) [.9] IM FTHRU MM INH S 9.. KG 9.. SO 9.. FI 0.. OV.. VR 0..9 LE 0.. M x.0 x. OP
More information6730 PARTS BOOKLET 2015 EDITION PARTS BREAKDOWNS / INSTALLS PAGE DESCRIPTION 5. TWO SPEED 6-7. SHIFTERS
0 PRTS BOOKLET 0 EDITION PRTS BREKDOWNS / INSTLLS PGE. TONGUE & JK. VIEWING PLTFORM. PILLOW BLOK BERING. TWO SPEED -. SHIFTERS. OIL RESERVOIR -. DRIVELINE ONFIGURTIONS -. DRIVESHFS. PTO REFERENE PGE -.
More informationDanger of electrical shock, burns or death.
anger of electrical shock, burns or death. lways remove all power sources before attempting any repair, service or diagnostic work. Power can be present from shore power, generator, inverter or battery.
More informationRL-H80 PARTS LIST # K
RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
More informationWATER HEATER PATENTED TECHNOLOGY
THE ONLY WY TO INSTLL NY TNKLESS WTER HETER Heavy duty forged brass valves with full port main flow channel & drain Hi-flow full port 3/4" drain offers the greatest flow rate 304 Stainless steel wing handle
More informationMK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
More informationMicromatic 17B PARTS LIST. Advance MODEL This parts list is for machines after serial number /96 revised 8/01 FORM NO.
Micromatic B PARTS LIST Advance MODEL 000 This parts list is for machines after serial number 9/9 revised /0 FORM NO. 0 9-9 00- TABLE OF CONTENTS Micromatic B DESCRIPTION PAGE Chassis System... - Solution
More informationBG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c
BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents
More information+ B-STYLE HOSE SETS A-STYLE HOSE SETS DOUBLE HOSE CONNECTION NPT THREADED LOCKING SAFETY PINS PUMP FLANGES A-STYLE LOCKING BAR A-STYLE PUMP FITTINGS
-STYLE HOSE SETS 1 -STYLE HOSE SETS DOULE HOSE ONNETION NPT THREDED LOKING SFETY PINS PUMP FLNGES -STYLE LOKING R -STYLE PUMP FITTINGS ELOWS INRESERS REDUERS T s Y s END PLUGS END PS DOULE MLES DOULE FEMLES
More informationASSEMBLY INSTRUCTIONS
SSEMLY INSTRUCTIONS Revision Date 08-23-05 pollo Modular Gym System Standard Deluxe merica s Premier Exercise Equipment Rev0 bout the Congratulations on your new purchase of the Inner Outer Thigh Station.
More informationIllustrated Parts List MODEL. Reproduction Not for. 8,000 Watt Generator Systems
Illustrated Parts List MODEL 040350-00 040350-01 8,000 Watt Generator Systems IPL No.1756640 Rev. C 8/11/2015 PRODUCT COMPONENTS Table Of Contents PAGES Alternator Group... 4 Control Panel Group... 6
More informationUniversal Tablet Mount Accessory for Flex TechBridge
Assembly Instructions Universal Tablet Mount Accessory for Flex TechBridge Universal Tablet Mount Accessory Universal Tablet Mount Accessory mounted on Flex Arm CONTENTS Important User Information...........................2
More informationMetal Backshell. Materials and Finishes Material: Brass Finish: 50 in. Gold over Copper
Subminiature Space/High Reliability Metal ackshell Metal ackshells provide strain relief. Various profiles available for different cable routing requirements. Product eatures Qualified to MIL-Spec M85049
More informationDistinctive Characteristics
istinctive haracteristics Low profile body of MRF model accommodates space limitations required for P mounting. For the MR and MRK bushing mount models, the range of behind panel body depths is. to. (.mm
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBERS BEFORE G10000 WITH SERIAL NUMBERS AFTER G00000 FOR DOWN PRESSURE HYDRAULICS WITH
More informationIllustrated Parts List MODEL. Reproduction Not for. 8,000 Watt Generator Systems
Illustrated Parts List MODEL 040350-00 040350-01 8,000 Watt Generator Systems IPL No.1756640 Rev. B 1/22/2015 PRODUCT COMPONENTS Table Of Contents PAGES Alternator Group... 4 Control Panel Group... 6
More informationMore outlets. More flexibility. Highest quality.
The New ProGrade PU Zero-U Rack Mounted abinet PUs with Outlets More outlets. More flexibility. Highest quality. 00-0V Single-Phase 0/ 0V -Phase 0 00 & V -Phase & 0 Looking for more outlets, more flexibility
More informationREV 2 X Games Snowboarder Operator s Manual
04000060 REV X Games Snowboarder Operator s Manual Snow oarder TM 07 Raw Thrills, Inc. ll Rights Reserved. 07 ESPN, Inc. ESPN, X Games, the X Games logo, etc. registered trademarks of ESPN, Inc. Table
More information4430 PARTS BOOKLET 2015 EDITION PARTS BREAKDOWNS / INSTALLS PAGE DESCRIPTION 8. OIL RESERVOIR INSTALL
0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. TONGUE & JACK. VIEWING PLATFORM. PILLOW BLOCK BEARING. TWO SPEED -. SHIFTERS. OIL RESERVOIR INSTALL -. DRIVELINE CONFIGURATIONS -. DRIVESHAFTS.
More informationPARTS BOOKLET
00-0-0-0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. JACK & TONGUE. VIEWING PLATFORM. TWO SPEED -. SHIFTERS. OIL RESERVOIR -. PLANETARY 0-. DRIVELINE CONFIGURATIONS -. SLIP CLUTCH PAGES.
More informationGLASS TAKE-OUT HOLDERS AND INSERTS
GLSS TKE-OUT HOLERS N INSERTS Full line of holders and GLSSMTE inserts lanks POO hot glass handling materials have high strength, durability and excellent thermal properties that reduce mechanical damage.
More informationFRONT VIEW. Steel Column
HEIGHT heck electrical prints to determine conduit sizes (must meet code) Top Scoreboard Section ottom Scoreboard Section "" "" "" "" 0' pprox. (to bottom lowest display component) Pier epth (see sheets
More informationEPX2155. Piston Pump. Owner s Manual. Model Numbers: Stand Upright Cart Low Boy Cart
EPX Piston Pump Owner s Manual Model Numbers: 000 Stand 00 Upright Cart 00 Low Boy Cart SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com
More informationserial number A1159T or lower, which includes all manufactured in 2008 Not compatible and not required. Figure 1 Auger Update Sites Call-Outs R B
Installation Instructions 1 Auger Carrier Update ADC2350 Air Carts Used with: ADC2350B General Information These instructions explain how to install an Auger Carrier Update on a pre-2009 pull-behind air
More information(n1.43 [36]) (n1.31 [33]) (0.69 [18])
REV PPROVED INITIL RELESE //6 MP D D (n. [6]) (n. []) (.8 [8]) (0.69 [8]) NEOPRENE WSHER /8-8 UNEF- THRED SUPPLIER PRINT EPTNE: [ ] ccept drawing/specification: No changes needed: [ ] This part is RoHS
More informationSECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE
SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &
More information1630 PARTS BOOKLET 2015 EDITION PARTS BREAKDOWNS / INSTALLS DESCRIPTION
0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. JAK & TONGUE. VIEWING PLATFORM. TWO SPEED -. SHIFTERS -. OIL & GREASE RESERVOIRS -0. PLANETARY -. DRIVELINE ONFIGURATIONS -. SLIP LUTH PAGES.
More informationSG cc honda. PN: Rev Companion to SN Range: A04843
STUMP GRINDER SG30-30cc honda PARTS manual PN: 23 Rev 200 Companion to 23 SN Range: 06 - A03 Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you for purchasing a ECHO Bear Cat product. The ECHO Bear
More informationHusqvarna X4000. Illustrated Parts List Jun 2009
Husqvarna Illustrated Parts List -0 0 Jun 00 MAINFRAME 00 000 MAINFRAME ASSEMBLY, 000 COVER, BELT GUARD 00 WHEEL COVER 000 ROLLCAGE, RIGHT 000 ROLLCAGE, LEFT 00 BLOCK, SPRING 00 BRACKET, ACTUATOR MOUNT
More informationUltima X5000 Round Duct Mount Kit User Instructions
Ultima X5000 Round Duct Mount Kit User Instructions MSA Kit 10179124/10179321 - Ultima X5000 316 Stainless Steel Parts List / Instructions Round Duct Mount Gasket (1) Round Duct Mount Base Plate (1) Base
More information5000 Sc. Cleaning Solution Generator Parts Manual. North America / International. DM20008 Rev. 02 (6-2012) *DM20001*
5000 Sc Cleaning Solution Generator Parts Manual North America / International www.tennantco.com DM20008 Rev. 02 (-202) *DM2000* A B Ref Part No. Serial Number Description Qty. 828 (000000- ) Bracket Wldt,
More informationSECTION 1 STEEL STRAIGHT PLOW
STION STL STRAIGHT PLOW -0 S STL STRAIGHT PLOW FOR SRIS 00, 00 AND 00 SNOWPLOWS PLOW OMPONNTS PAG MOLDBOARD ASSMBLIS PAG QUADRANT/PUSH FRAM ASSMBLY PAG LIFT FRAM ASSMBLY PAG POWR UNIT OVR ASSMBLY POLY
More informationSteel Column. 1 Rev. 3 Row Scoreboards (See Sheet 7 for bracket dimensions)
SOREOR HEIGHT heck electrical prints to determine conduit sizes (must meet code) WITH ddtional display area consisting signs, arches, message centers or video above or below the scoreboard. (see sheets
More informationSno-Thro. Parts Manual. Models (SS522EC) (SS722EC) (SS522) (SS522EC) (SS722C) /06 Printed in USA
Sno-Thro Parts Manual Models 801 (SSEC) 8018 (SSEC) 801 (SS) 8 (SSEC) 80 (SSC) 0000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit.
More informationFluid Head Specifications... 1 Parts(GH03)... 2 Set up & Use Installing the Pan Handle... 8
User s Manual PR LU Thank you for purchasing -M professional heads and tripods. This manual is an important tool for personnel who operate and maintain this equipment. nside, you will find detailed information
More informationPH-M3x5. Contents. Page
Page 2... 3... 4... 5-6... 7-8... 9... 10... 11... 12-14... 15... ontents Index, Message, Introduction Product Overview Preparation for ssembly Installing the Motherboard Installing the PU ooler Installing
More informationSECTION 1 STEEL STRAIGHT PLOW
STION STL STRAIGHT PLOW, S STL STRAIGHT PLOW MODLS:, 0, AND, 0, PLOW OMPONNTS PAG MOLDBOARD ASSMBLIS PAG QUADRANT/PUSH FRAM ASSMBLY PAG LIFT FRAM ASSMBLY PAG POWR UNIT OVR ASSMBLY POLY SNOW DFLTOR KITS
More informationRational supply for tools at work stations
hose reels automatic hose reels Rational supply for tools at work stations Automatic hose reels are essential basic equipment for workshops. They save time and improve comfort and safety when using flexible
More informationLH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................
More informationArlington Industries, Inc.
800/233-4717 FX 570/562-0646 rlington Industries, Inc. LEWY able Runway Support System able support system for either power or low voltage cable. For new construction or retrofit. Non-metallic. T205 New!
More informationBronze Parallel, Cross, and Bar Taps TYPE GPEX. Ordering Information. or
TYPE GPEX opper Universal lamp For able A versatile connector which takes a range of conductor sizes in two positions. olt positions held to NEMA standards enabling cable or pipe to be bolted directly
More informationRedexim-Charterhouse Verti-Drain 7316 pag 01 code 0401
Redexim-Charterhouse Verti-Drain 7316 pag 01 code 0401 1 4191100 Winged nut 10 2 4100800 Self lock nut M6 10 3 2282183 Bottom PTO protection cover 1 4 4001030 Bolt M6 x 16 10 5 2281782 Top PTO protection
More informationLCD 500,1500. Spare parts list. Handheld core drills. Valid from serial number Construction Tools PC AB No
LCD 500,1500 Spare parts list Handheld core drills LCD 500 LCD 500 LCD 1500 Valid from serial number BGF0006875 BGF0006875 BGF0006875 2015 Construction Tools PC AB No. 3392 5193 01 2015-06 General information
More information3000j UT Page 1 of 24 Air Filter & Carburetor
3000j UT-26034 Page 1 of 24 Air Filter & Carburetor 3000j UT-26034 Page 2 of 24 Air Filter & Carburetor Ref # Part Number Qty S/P/F Description 1 07752 1 S SCREW & WASHER Torque Specs: 35-45 2 07754 1
More informationPre-Drilled Standard Support Angles
Pre-Drilled ngles Standard Support Pre-Drilled Standard Support ngles UDB-750200 Series dd for luminum. UNEQUL LEGS MTERIL VILBILITY DETERMINES ONE OR TWO PIECE NGLE CONSTRUCTION. This Pre-Drilled Unequal
More informationGPS-FO7309G3 Vehicle Specific Mounting Bracket for Most Portable GPS
GPS-FO7309G3 Vehicle Specific Mounting racket for Most Portable GPS FO-73-09-G3 Pro.Fit Vehicle Specific Mounting racket (See included Pro-Fit manual for instructions & specific car compatibility) Installing
More informationRear Blades RB05, RB15 & RBT P Parts Manual. Copyright 2015 Printed 01/15/16
Rear Blades RB05, RB15 & RBT15 10335 301-143P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception.
More informationLH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
LH 00 Spare parts list Forward and reversible plate LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio Valid from serial
More informationSECTION 9 POLY TRIP EDGE C-PLOW
TION POLY TRIP DG -PLOW MODL: 0, 0 PLOW OMPONNT PAG MOLDBOARD AMBLI PAG PUH FRAM AMBLY PAG LIFT FRAM AMBLY PAG POWR UNIT OVR AMBLY WING KIT PAG RUBBR UTTING DG / THIK UTTING DG PAG WAR PLAT KIT URB GUARD
More informationDETAIL B SCALE 1/4 DETAIL A SCALE 1/4 1/4 CENTERED 1/4 2 1/4 3" EA END & 3" ON CENTER TYP 1/4 1/ (1/4) /
/ / ENTERE / / / " E EN & " ON ENTER TYP. 0.0 (/) 0.0..00 /..00.. 0 / / / - / - (/) /.00..0 0.00. / / (/) 0.0.0... 0. 0.. / (/) / (/) (/).00.00 0..0 ETIL SLE / 0. 0.0 MSK THESE PLES S SHOWN OTH SIES, PLES
More informationa = 1.25 (31.8) b =.687 (17.4) c =.625 (15.9) a =.813 (20.7) b =.250 (6.4) c =.563 (14.3) d =.031 (0.8) min. of cable dielectric
CONNECTING WITH QUALITY SINCE 959 Route 59 Hillurn, New York 09 offie:(85) 57-750 fx: (85) 57-760 wesite: http://www.zls.om e-mil: info@zls.om UHF ASSEMBLY INSTRUCTIONS #0 UG STANDARD SOLDER TYPE (PL-59)
More informationSECTION 5 STEEL C-PLOW
TL -PLOW 00 TION TL -PLOW FOR RI 00 -PLOW PLOW OMPONNT PAG MOLDBOARD AMBLY PAG QUADRANT / PUH FRAM AMBLY PAG LIFT FRAM AMBLY PAG POWR UNIT OVR AMBLY / THIK UTTING DG PAG URB GUARD KIT WAR PLAT KIT PAG
More informationFormulate 20 Vertical Curve
Formulate 20 Vertical Curve FMLT-WV20-03 Formulate TM is a collection of sophisticated, ergonomically designed exhibit booths. Formulate combines state-of-the-art zipper pillowcase dye-sublimated fabric
More informationInstallation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
More informationV GM C4500 C5500
Illustrated Parts List for VMAC System System V900099 2008-2007 GM C4500 C5500 LMM Duramax 6.6L Diesel without dual alternators System V900098 2007-2006 GM C4500 C5500 Duramax 6.6L Diesel without dual
More informationHP STD 33" Cut (S/N ) Page 1 of 15 Drive Assembly
34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 1 of 15 Drive Assembly 34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 2 of 15 Drive Assembly 1 1 Engine, 8 HP, Recoil Start Order
More information