SG cc honda. PN: Rev Companion to SN Range: A04843

Transcription

1 STUMP GRINDER SG30-30cc honda PARTS manual PN: 23 Rev 200 Companion to 23 SN Range: 06 - A03

2 Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you for purchasing a ECHO Bear Cat product. The ECHO Bear Cat line is designed, tested, and manufactured to give years of dependable performance. To keep your machine operating at peak efficiency, it is necessary to adjust it correctly and make regular inspections. The following pages will assist you in the operation and maintenance of your machine. Please read and understand this manual before operating your machine. If you have any questions or comments about this manual, please call us toll-free at If you have any questions or problems with your machine, please call or write your local authorized ECHO Bear Cat Dealer. This document is based on information available at the time of its publication. ECHO Bear Cat is continually making improvements and developing new equipment. In doing so, we reserve the right to make changes or add improvements to our product without obligation for equipment previously sold. PLEASE SEND US YOUR WARRANTY CARD A warranty card is included in your owner's kit packaged with your machine. Please take the time to fill in the information requested on the card. When you send your completed card to us, we will register your machine and start your coverage under our limited warranty. FOR MACHINE SERVICE OR PARTS: For service assistance, contact your nearest authorized ECHO Bear Cat dealer or the factory. For parts, contact your authorized dealer. The parts manual for your machine is available at index_html. Your dealer will need to know the serial number of your machine to provide the most efficient service. See below for information on how to identify and record the serial number for your machine. FOR ENGINE SERVICE OR PARTS: For engine service or parts, contact your nearest authorized engine dealer. ECHO Bear Cat does not handle any parts, repairs or warranties for engines. ORDERING PARTS Only genuine ECHO Bear Cat replacement parts should be used to repair the machine. Replacement parts manufactured by others could present safety hazards, even though they may fit on this machine. Replacement parts are available from your ECHO Bear Cat dealer. Provide the following when ordering parts: The SERIAL NUMBER of your machine. The PART NUMBER of the part. The PART DESCRIPTION. The QUANTITY needed. SERIAL NUMBER LOCATION Please record the serial number in the space provided and on the warranty and registration card. ManuFaCTuREd By CRaRy InduSTRIES WEST FaRgo, north dakota 50 u.s.a. SERIal number xxxxxx ManuFaCTuREd In u.s.a. SERIAL NUMBER How to contact ECHO Bear Cat address Phone hours 23 NW 2th Street P.O. Box West Fargo, ND Fax: opesales@crary.com service@crary.com Monday - Friday, am to 5 pm Central Time 200, Crary industries, all rights reserved. produced and printed in the u.s.a.

3 TABLE OF CONTENTS DESCRIPTION PAGE SPINDLE ASSEMBLY... 2 Serial Number Range: A03 SPINDLE ASSEMBLY... Serial Number Range: HANDLE & WHEEL ASSY... 6 THROTTLE CABLE ASSY... ENGINE ASSEMBLY... 0 DECALS... SERVICE PARTS & OPTIONS... 2 Page

4 SPINDLE ASSEMBLY Serial Number Range: A03 2/ Page 2

5 2/0 Serial Number Range: A03 SPINDLE ASSEMBLY SPINDLE ASSEMBLY ITEM PART NUMBER DESCRIPTION qty 2363 SHEAVE, 3V. 5X2-SH BEARING, BALL BOLT, 3/ NC X 3 HEX HD 503 WASHER, 3/ FLAT NUT, 3/ CENTERLOCK 6 52 BOLT, 5/6 X 3-/2 HEX 53 BOLT, /2 X 3/ NF 5250 WASHER, 5/6 FLAT NUT, 5/6 NYLOCK KEY, / X SQ 2 53 NUT, 3/ NYLOCK 2 53 BOLT, 5/6 X -/ CRG BOLT, 5/6 X -3/ HEX 63 PULLEY, 3-/ FLAT IDLER 5 65 BUSHING,.0 SH TOOTH, STRAIGHT STUMPGRINDER 66 TOOTH, CURVED STUMPGRINDER 62 SPRING, 3/ OD EXTENSION 6253 TUBE, 3/ IDLER SPACER, IDLER PIVOT 2 02 IDLER ARM WELDMENT TUBE, PIVOT SPACER,.5 X PLATE, COVER STUMPGRINDER HEAD STUMPGRINDER FRAME WELDMENT SPINDLE HUB WELDMENT SPINDLE, SG 2 BLADE TUB, SPACER -3/ X SPACER, -3/ X / plate, disk stumpgrinder head BOLT, 3/ X -3/ CRG WASHER, /2 GR SAE FLAT PLATE, SPACER STUMPGRINDER HEAD Page 3

6 SPINDLE ASSEMBLY Serial Number Range: / Page

7 2/0 Serial Number Range: SPINDLE ASSEMBLY SPINDLE ASSEMBLY ITEM PART NUMBER DESCRIPTION qty 2363 SHEAVE, 3V. 5X2-SH BEARING, BALL BOLT, 3/ NC X 3 HEX HD 503 WASHER, 3/ FLAT NUT, 3/ CENTERLOCK 6 52 BOLT, 5/6 X 3-/2 HEX 5 BOLT, 3/ NC X -3/ HEX HD 5250 WASHER, 5/6 FLAT NUT, 5/6 NYLOCK KEY, / X SQ 2 53 NUT, 3/ NYLOCK 2 53 BOLT, 5/6 X -/ CRG BOLT, 5/6 X -3/ HEX 63 PULLEY, 3-/ FLAT IDLER 5 65 BUSHING,.0 SH TOOTH, STRAIGHT STUMPGRINDER 2 66 TOOTH, CURVED STUMPGRINDER 2 62 SPRING, 3/ OD EXTENSION 6253 TUBE, 3/ IDLER SPACER, IDLER PIVOT 2 02 IDLER ARM WELDMENT TUBE, PIVOT SPACER,.5 X. 2 BOTTOM DISK, STUMPGRINDER STUMPGRINDER FRAME WELDMENT SPINDLE HUB WELDMENT STUMPGRINDER SPINDLE WELDMENT 2 2 SPACER, -3/ X SPACER, -3/ X /2 Page 5

8 HANDLE & WHEEL ASSY. 2/ Page 6

9 2/0 HANDLE & WHEEL ASSY. HANDLE AND WHEEL ASSEMBLY ITEM PART NUMBER DESCRIPTION qty 5003 BOLT, 5/6 X 3/ HEX HD WASHER, 5/6 FENDER 3 50 WASHER, /2 SAE FLAT 52 WASHER, 5/ SAE FLAT BOLT, / X 2-/ HEX HD 6 52 BOLT, 5/6 X HEX HD 5250 WASHER, 5/6 FLAT BOLT, 5/6 X CRG 532 KNOB, 5/6 SPOUT NUT, 5/6 NYLOCK CLIP, HAIRPIN DECAL, STUMPGRINDER INFO 3 66 TIRE AND WHEEL SPRING,.555 OD X 2.5 LG 5 20 HANDLE BAR, UPPER 6 20 FLAP, STUMPGRINDER 2 62 HANDLE BAR, LOWER 26-2 BRACE, HANDLEBAR 22-2 WHEEL BRAKE WELDMENT STRIP, HANDLEBAR SUPPORT Page

10 THROTTLE CABLE ASSY. 2/ Page

11 2/0 throttle cable assy. THROTTLE CABLE ASSEMBLY ITEM PART NUMBER DESCRIPTION qty 20 SWITCH, ENGINE KILL 2-00 WIRE ASSY, ENGINE KILL BOLT, 5/6 X 3/ HEX HD 50 NUT, 5/6 CENTERLOCK NUT, 5/6 CENTERLOCK 6 5 BOLT, / X 2-/ HEX HD 522 BOLT, 5/6 X -/2 HEX 5356 NUT, 5/6 NYLOCK WASHER, 5/6 SAE FLAT CONTROL, THROTTLE 66 CABLE, STUMPGRINDER STRAP, NYLON TIE 3 02 WELDMENT, TOP BALE 2 3 SCREEN, DEBRIS 5 3 CLAMP, SCREEN GUARD, / WIRE STRIP, SWITCH MOUNT 22-2 BOTTOM BALE WELDMENT WASHER, 5/6 EXT TOOTH ZP 5 Page

12 ENGINE ASSEMBLY 2/ ENGINE ASSEMBLY ITEM PART NUMBER DESCRIPTION qty 2363 SHEAVE, 3V. 5X2-SH ENGINE, HP HONDA BELT, 3V X 530 DOUBLE BANDED 5003 BOLT, 5/6 X 3/ HEX HD 5 50 BOLT, 5/6 X 2 HEX HD NUT, 5/6 HEX WASHER, 5/6 FLAT NUT, 5/6 NYLOCK KEY, / X SQ BOLT, 5/6 X -/ NF HEX 2 55 SCREW, 5/6 X 3 SQ HD SET 2 65 BUSHING,.0 SH PLATE, ENGINE MOUNT COVER, TOP STUMP GRINDER Page 0

13 2/0 DECALS DECALS ITEM PART NUMBER DESCRIPTION QTY 20 DECAL, SG CONTROL DECAL, MODEL 3 (SUPERCEDED BY - 00) -00 DECAL, MODEL SG DECAL, STUMPGRINDER INFO 623 DECAL, THROTTLE CONTROL DECAL, GRINDER DANGER DECAL, PROTECTION 3 DECAL, SMALL BEARCAT DECAL, SMALL BEARCAT (EURO MODELS) 2-00 DECAL, MULTILIGUAL MANUAL 0-00 DECAL, DB DECAL, CE Page

14 SERVICE PARTS & OPTIONS 2/0 BLADE TOOTH REPLACEMENT KIT (5) PART NUMBER DESCRIPTION QTY 66 STUMP CUTTER TEETH, STRAIGHT 2 66 STUMP CUTTER TEETH, RH 2 5 BOLT, 3/ X -3/ GR5 HCS ZP 50 NUT, 3/ CENTERLOCK ZP 665 INSTRUCTIONS, CUTTER SHARPENING 2 BLADE TOOTH REPLACEMENT KIT (622-00) PART NUMBER DESCRIPTION QTY 66 STUMP CUTTER TEETH, STRAIGHT 66 STUMP CUTTER TEETH, RH 505 BOLT, 3/ X -3/ GR5 CARR BLT ZP 2 53 NUT, 3/ NE NYLOCK ZP WASHER, /2 HI-STRENGTH SAE ZP 53 BOLT, /2-20 X 3/ GR5 HHCS NF ZP 2 BLADE RETRO FIT KIT (603-00) (SUPERSEDES RETRO FIT KIT ) PART NUMBER DESCRIPTION QTY ASSY., RETROFIT SG 2 BLADE CUT INSTRUCTIONS, SG 2 TOOTH CUTTER KIT 2 BLADE CUTTER UPGRADE KIT (606-00) PART NUMBER DESCRIPTION QTY 505 BOLT, 3/ X 3/" CRG 2 53 NUT, 3/" NYLOCK PLATE, COVER STUMP GRINDER HEAD 6-00 PLATE, SPACER STUMP GRINDER HEAD PLATE, DISK STUMP GRINDER HEAD INSTRUCTIONS, SG30 CUTTER UPGRADE Page 2

15 ECHO Bear Cat 23 NW 2th Street, West Fargo, ND 50-0 Phone: Toll Free: Fax: