+ B-STYLE HOSE SETS A-STYLE HOSE SETS DOUBLE HOSE CONNECTION NPT THREADED LOCKING SAFETY PINS PUMP FLANGES A-STYLE LOCKING BAR A-STYLE PUMP FITTINGS
|
|
- Pauline McGee
- 5 years ago
- Views:
Transcription
1 -STYLE HOSE SETS 1 -STYLE HOSE SETS DOULE HOSE ONNETION NPT THREDED LOKING SFETY PINS PUMP FLNGES -STYLE LOKING R -STYLE PUMP FITTINGS ELOWS INRESERS REDUERS T s Y s END PLUGS END PS DOULE MLES DOULE FEMLES
2 -01 GLVNIZED -STYLE HOSE SETS SIZE PRT NUMER WEIGHT GLVNIZED HOSE SET SSEMLY * 2" 275 HS lbs 3" 275 HS lbs 4" 275 HS lbs 5" 275 HS lbs 6" 275 HS lbs 8" 275 HS lbs GLVNIZED LL / MLE HOSE END * 2" 260 HTM lbs 3" 260 HTM lbs 4" 260 HTM lbs 5" 260 HTM lbs 6" 260 HTM lbs 8" 260 HTM lbs GLVNIZED SOKET / FEMLE HOSE END * 2" 270 HTF lbs 3" 270 HTF lbs 4" 270 HTF lbs 5" 270 HTF lbs 6" 270 HTF lbs 8" 270 HTF lbs * Only Wil-loc has the wedge shaped barb on the 4", 6" & 8" sizes. GLVNIZED LOKING LEVER 2" 273 LR lbs 3" 273 LR lbs 4" 273 LR lbs 5" 273 LR lbs 6" 273 LR lbs 8" 273 LR lbs PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. O-RING 2" 280 OR lbs 3" 280 OR lbs 4" 280 OR lbs 5" 280 OR lbs 6" 280 OR lbs 8" 280 OR lbs GLVNIZED DOULE HOSE ONNETION 2" 278 DH lbs 3" 278 DH lbs 4" 278 DH lbs 6" 278 DH lbs 8" 278 DH lbs WIL WIL-LO
3 GLVNIZED -STYLE HOSE SETS -02 VUUM RTING 30 inches hg PRESSURE RTING 2 & 3 inch = 290 psi 4 8 inch = 175 psi NUMER OF RIS 2 & 3 inch = inch = 3 LEVER MEHNIL SPES Specifications to 1/100th of an Inch // Specs Subject to hange SIZE D E 2" 50mm x 50mm " 76mm x 76mm " 108mm x 100mm " 133mm x 125mm " 159mm x 150mm " 194mm x 200mm PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO TEH TIP Only Wil-loc has the wedge shaped hose barb on the 4", 6" & 8" sizes. MLE MEHNIL SPES Hose Set Specifications to 1/100th of an Inch // Specifications Subject to hange SIZE D E F G H I 2" 50mm x 50mm " 76mm x 76mm " 108mm x 100mm " 133mm x 125mm " 159mm x 150mm " 194mm x 200mm FEMLE MEHNIL SPES Hose Set Specifications to 1/100th of an Inch // Specifications Subject to hange SIZE D E F G H I S 2" 50mm x 50mm " 76mm x 76mm " 108mm x 100mm " 133mm x 125mm " 159mm x 150mm " 194mm x 200mm Wil-loc couplings have a higher working pressure rating than typical cam-lock or other quick action couplings. Typical cam-lock: 2" = 250psi, 3" = 125psi, 4" = 100psi, 5" = 75psi and 6" =75psi. heck with your manufacturer for specific ratings.
4 -03 GLVNIZED -STYLE HOSE SETS SIZE PRT NUMER WEIGHT GLVNIZED HOSE SET SSEMLY 10" 276 HS lbs 12" 276 HS lbs 12" Galvanized Locking ar sold separately. 10" HOSE SET SHOWN GLVNIZED LL / MLE HOSE TIL W/ LOKING RING 10" 261 HTM lbs 12" 261 HTM lbs ll 10" and 12" -Style Hose Sets come with a locking ring. 10" FEMLE SHOWN GLVNIZED SOKET / FEMLE HOSE TIL W/ O-RING 10" 271 HTF lbs 12" 271 HTF lbs 12" Galvanized Locking ar sold separately. GLVNIZED LOKING RING 10" 251 G10R 8.35 lbs 12" 251 G12R lbs O-RING 10" 281 OR lbs 12" 281 OR lbs PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. GLVNIZED DOULE HOSE ONNETION 10" 278 DH10 12" 278 DH lbs WIL WIL-LO
5 GLVNIZED -STYLE HOSE SETS -04 VUUM RTING 30 inches hg PRESSURE RTING 88 psi NUMER OF RIS 2 E F G D -STYLE LOKING RING PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO MLE MEHNIL SPES Hose Set Specifications to 1/100th of an Inch // Specifications Subject to hange TEH TIP SIZE D E F G 10" 250mm x 150mm " 300mm x 300mm " FEMLE HOSE TIL 10" FEMLE HOSE TIL FEMLE MEHNIL SPES Hose Set Specifications to 1/100th of an Inch // Specifications Subject to hange SIZE D E F G 10" 250mm x 150mm " 300mm x 300mm For easier coupling (especially of larger sizes) lubricate O-rings with Wil-lube (as seen in Specialty section). This will allow the ball to seat into the socket easier during first time usage. Double hose connections provide a quick, inexpensive way to repair leaks in the field. ut the leak area out of the lay-flat hose, insert the double hose connection and use two Wil-loc T-olt clamps per end to clamp the lay-flat onto double connection. HND LEVER ON 10" ONLY D F G E
6 -05 GLVNIZED NPT THREDED SIZE PRT NUMER WEIGHT GLVNIZED MLE THREDED LONG LL / MLE W/ LOKING LEVER 2" 020 MT lbs 3" 020 MT lbs 4" 020 MT lbs 6" 020 MT lbs 8" 020 MT lbs GLVNIZED MLE THREDED SHORT LL / MLE W/ LOKING LEVER 2" 022 MT lbs 3" 022 MT lbs 4" 022 MT lbs 6" 022 MT lbs 8" 022 MT lbs GLVNIZED FEMLE THREDED SHORT LL / MLE W/ LOKING LEVER 2" 025 FT lbs 3" 025 FT lbs 4" 025 FT lbs 6" 025 FT lbs 8" 025 FT lbs GLVNIZED MLE THREDED SOKET / FEMLE 2" 040 SMT lbs 3" 040 SMT lbs 4" 040 SMT lbs 6" 040 SMT lbs 8" 040 SMT lbs PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. GLVNIZED FEMLE THREDED SOKET / FEMLE 2" 045 SFT lbs 3" 045 SFT lbs 4" 045 SFT lbs 6" 045 SFT lbs 8" 045 SFT lbs LEVER LOKING SFETY PINS 2" 009 LLSP2 N/ 3"- 4" 009 LLSP3-4 N/ 6"- 8" 009 LLSP6-8 N/ WIL WIL-LO
7 GLVNIZED NPT THREDED -06 VUUM RTING 30 inches hg PRESSURE RTING 2 3" = 290 psi 4 8" = 175 psi THREDED PTTERN NPT 022 SERIES 020 SERIES D PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO NPT MEHNIL SPES Specifications to 1/8th of an Inch // Specifications subject to change SIZE D E F G H I J 2" 50mm x 50mm " 76mm x 76mm "108mm x 100mm "159mm x 150mm "194mm x 200mm TEH TIP 040 SERIES E F 025 SERIES 045 SERIES Wil-loc offers two different threaded shanks for the male connections. The 020 Series allows the locking ring lever to close above the male NPT threads. The 022 Series locking lever closes below the male NPT threads. heck application clearance before choosing the correct fit. efore installing a Wil-loc threaded fitting, apply an all-purpose anti-seize product to threads. If the fitting should have to be removed from the pump, the anti-seize product can prevent seizure of the threads. G H I J
8 -07 GLVNIZED PUMP FLNGES SIZE PRT NUMER WEIGHT GLVNIZED DISHRGE FLNGE LL / MLE 3" 010 F3M lbs 4" 010 F4M lbs 6" 010 F6M lbs 8" 010 F8M lbs ll flanges are designed to S 150 series hole specifications. GLVNIZED SUTION FLNGE SOKET / FEMLE 3" 030 F3F 8.90 lbs 4" 030 F4F lbs 6" 030 F6F lbs 8" 030 F8F lbs ll flanges are designed to S 150 series hole specifications. GLVNIZED REDUING FLNGE - MLE / FEMLE 6" 033 F6-4M lbs 8" 033 F8-6M lbs 6" 032 F6-4F lbs 8" 032 F8-6F lbs ll flanges are designed to S 150 series hole specifications. GLVNIZED INRESING FLNGE - MLE / FEMLE 4" 033 F4-6M lbs 6" 033 F6-8M lbs 4" 032 F4-6F lbs 6" 032 F6-8F lbs ll flanges are designed to S 150 series hole specifications. FLNGE NEOPRENE GSKET 3" 288 FGN lbs 4" 288 FGN lbs 6" 288 FGN lbs 8" 288 FGN lbs 10" 289 FGN lbs 12" 289 FGN lbs 1/8th inch thickness. 1/4th inch thickness available / full faced. PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO
9 GLVNIZED PUMP FLNGES -08 VUUM PRESSURE RTING NUMER OF HOLES FLNGE PTTERN 30 inches hg 3" = 290 psi 3" has 4 bolt holes S " = 175 psi 4 8" has 8 bolt holes MLE FLNGE SPES Specs to 1/8" & subject to change SIZE 3" " " " PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO TEH TIP Wil-loc flange fittings are manufactured to S 150 pattern specifications. Gaskets should be used when mounting the flange fittings to a pump. If your pumps require other flange types or sizes, please contact your Wil-loc representative or dealer. Wil-loc increasing flanges allow quick connection of high flow pumps to larger discharge lines. Higher flows can be achieved because larger diameter pipe decreases friction losses. FEMLE FLNGE SPES Specs to 1/8" & subject to change SIZE 3" " " " S FLNGE SPES Specs to 1/8" & subject to change SIZE 3" " " "
10 -09 GLVNIZED -STYLE PUMP FITTINGS SIZE PRT NUMER WEIGHT GLVNIZED DISHRGE FLNGE LL / MLE 10" 011 F10M lbs 12" 011 F12M lbs ll flanges are designed to S hole specifications. GLVNIZED SUTION FLNGE SOKET / FEMLE 10" 031 F10F lbs 12" 031 F12F lbs ll flanges are designed to S hole specifications. 12" Galvanized Locking ar sold separately. -STYLE OUPLING SHOWN -STYLE OUPLING SHOWN INRESING & REDUING FLNGE LL / MLE 10" 034 F10-12M lbs 12" 034 F12-10M lbs ll flanges are designed to S hole specifications. INRESING & REDUING FLNGE SOKETS / FEMLE 10" 035 F10-12F lbs 12" 035 F12-10F lbs ll flanges are designed to S hole specifications. GLVNIZED MLE THREDED DISHRGE LL / MLE 10" 021 MT lbs 12" 021 MT lbs Threads are cut to NPT specifications. Price includes locking ring. PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. GLVNIZED MLE THREDED SUTION SOKET / FEMLE 10" 041 SMT lbs 12" 041 SMT12 N/ 12" Galvanized Locking ar sold separately. -STYLE GLVNIZED LOKING R 12" 258 4H 2 lbs WIL WIL-LO
11 GLVNIZED -STYLE PUMP FITTINGS -10 VUUM PRESSURE RTING FLNGE PTTERN NUMER OF HOLES 30 inches hg 88 psi S bolt holes THRED PTTERN NPT -STYLE FLNGE LL SPES Specs to 1/8" & subject to change HND LEVER ON 10" ONLY SIZE 10" " STYLE FLNGE SOKET SPES Specs to 1/8" & subject to change 10" " PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO TEH TIP The quick action and flexibility of 10" and 12" Wil-loc ouplings provides the end user with significant advantages over Victaulic or flanged methods previously used on large line applications. Wil-loc full-face neoprene gaskets provide superior sealing and longevity compared to half-face flange gaskets. For easier coupling (especially of larger sizes) lubricate O-rings with Wil-lube (as seen in Specialty section). This will allow the ball to seat into the socket easier during first time usage. -STYLE NPT THRD LL SPES Specs to 1/8" & subject to change SIZE 10" " STYLE NPT THRD SOKET SPES Specs to 1/8" & subject to change 10" "
12 -11 GLVNIZED ELOWS SIZE PRT NUMER WEIGHT GLVNIZED 90 ELOW 2" 070 E lbs 3" 070 E lbs 4" 070 E lbs 6" 070 E lbs 8" 070 E lbs GLVNIZED 60 ELOW 2" 075 E lbs 3" 075 E lbs 4" 075 E lbs 6" 075 E lbs 8" 075 E lbs GLVNIZED 45 ELOW 2" 080 E lbs 3" 080 E lbs 4" 080 E lbs 6" 080 E lbs 8" 080 E lbs GLVNIZED 30 ELOW 2" 085 E lbs 3" 085 E lbs 4" 085 E lbs 6" 085 E lbs 8" 085 E lbs GLVNIZED -STYLE 90 ELOW 10" 086 E lbs 12" 086 E lbs PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. 12" Galvanized Locking ar sold separately. 45 -STYLE ELOW GLVNIZED -STYLE 45 ELOW 10" 086 E lbs 12" 086 E lbs 12" Galvanized Locking ar sold separately. WIL WIL-LO
13 GLVNIZED ELOWS -12 VUUM 30 inches hg PRESSURE RTING 2 3" = 290 psi 4 8" = 175 psi 10 12" = 88 psi 2" THROUGH 8" 90 10" & 12" ELOW SPES Specifications to 1/8" & subject to change SIZE 2" PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO TEH TIP When connecting ball and socket coupled hoses and fittings to a pump, position the locking jaws of the lever locking ring as close to 12 o clock and 6 o clock (in other words, top and bottom) as possible. 2" THROUGH 8" 60 2" THROUGH 8" 45 2" THROUGH 8" 30 10" & 12" 45 Wil-loc elbows allow smooth transitions through bends and turns on suction or discharge lines. Using Wil-loc elbows will reduce the wear of your hose and eliminate flow restrictions caused by kinking of lay-flat hose. 3" " " " " " , 45 & 60 ELOW SPES Specifications to 1/8" & subject to change SIZE (30 ) (45 ) (60 ) 2" " " " " " " For easier coupling (especially of larger sizes) lubricate O-rings with Wil-lube (as seen in Specialty section). This will allow the ball to seat into the socket easier during first time usage.
14 -13 GLVNIZED INRESERS & REDUERS SIZE PRT NUMER WEIGHT GLVNIZED INRESER W/ LOKING LEVER 2" x 3" 150 IN2-3M 3.70 lbs 2" x 4" 150 IN2-4M 7.90 lbs 3" x 4" 150 IN3-4M 7.50 lbs 3" x 6" 150 IN3-6M lbs 3" x 8" 150 IN3-8M lbs 4" x 6" 150 IN4-6M lbs 4" x 8" 150 IN4-8M lbs 6" x 8" 150 IN6-8M lbs -STYLE OUPLING SHOWN -STYLE OUPLING SHOWN GLVNIZED -STYLE INRESER 8" x 10" 151 IN8-10M lbs 8" x 12" 151 IN8-12M lbs 10" x 12" 151 IN10-12M lbs 12" Galvanized Locking ar sold separately. GLVNIZED REDUER 3" x 2" 160 R3-2M 2.65 lbs 4" x 3" 160 R4-3M 5.70 lbs 6" x 2" 160 R6-2M 6.55 lbs 6" x 3" 160 R6-3M 9.65 lbs 6" x 4" 160 R6-4M lbs 8" x 2" 160 R8-2M 9.30 lbs 8" x 3" 160 R8-3M lbs 8" x 4" 160 R8-4M lbs 8" x 6" 160 R8-6M lbs GLVNIZED -STYLE REDUER 10" x 8" 161 R10-8M lbs 12" x 8" 161 R12-8M lbs 12" x 10" 161 R12-10M lbs 12" Galvanized Locking ar sold separately. PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. GLVNIZED MODULR S-END 4" 162 SM lbs 6" 162 SM lbs 8" 162 SM lbs WIL WIL-LO
15 GLVNIZED INRESERS & REDUERS -14 VUUM 30 inches hg PRESSURE RTING 2 3" = 290 psi 4 8" = 175 psi 10 12" = 88 psi INRESER SPES Specifications to 1/8" & subject to change SIZE 2" x 3" " x 4" " x 6" " x 8" " x 10" " x 12" " x 12" PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO TEH TIP Wil-loc reducers and increasers are manufactured with a cone-shaped pipe, which allows for less flow restriction and smoother transition from one size to another. REDUER SPES Specifications to 1/8" & subject to change SIZE 3" x 2" " x 3" " x 2" " x 3" " x 4" " x 2" " x 3" " x 4" " x 6" " x 8" " x 8" " x 10" S-END SPES Specifications to 1/8" & subject to change SIZE 4" " " Wil-loc modular S-ends provide a smooth transition from a pump s discharge outlet to ground level. ombination of two 45-degree elbows and short pipe allows for maximum flexibility to accommodate unique job sites and ground conditions.
16 -15 GLVNIZED T s & Y s SIZE PRT NUMER WEIGHT GLVNIZED STND T s WITH MLE / LL ONNETION 2" 060 T2M 4.70 lbs 3" 060 T3M 9.00 lbs 4" 060 T4M lbs 6" 060 T6M lbs 8" 060 T8M lbs 10" 061 T10M N/ 12" 061 T12M * lbs 12" Galvanized Locking ar sold separately. GLVNIZED T s WITH FEMLE / SOKET ONNETION 2" 050 T2F 3.25 lbs 3" 050 T3F 6.60 lbs 4" 050 T4F lbs 6" 050 T6F lbs 8" 050 T8F lbs 10" 054 T10F N/ 12" 054 T12F * lbs 12" Galvanized Locking ar sold separately. GLVNIZED INLINE T s WITH MLE / LL ONNETION 2" 051 LT2M 3.65 lbs 3" 051 LT3M 6.65 lbs 4" 051 LT4M lbs 6" 051 LT6M lbs 8" 051 LT8M lbs 10" 052 LT10M N/ 12" 052 LT12M * lbs 12" Galvanized Locking ar sold separately. GLVNIZED DOULE FEMLE Y s MLE / LL 4" 064 YM lbs 6" 064 YM lbs 8" 064 YM lbs 10" 065 YM lbs 12" 065 YM12 * lbs 12" Galvanized Locking ar sold separately. GLVNIZED DOULE FEMLE Y s INRESING MLE / LL 2-4" x 6" 066 YI lbs 2-6" x 8" 066 YI lbs 2-8" x 10" 067 YI lbs 2-8" x 12" 067 YI8-12 * lbs 2-10" x 12" 067 YI10-12 * lbs 12" Galvanized Locking ar sold separately. PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO
17 GLVNIZED T s & Y s -16 VUUM 30 inches hg PRESSURE RTING 2 3" = 290 psi 4 8" = 175 psi 10 12" = 88 psi STNDRD MLE T SPES Specs to 1/8" & subject to change. PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO TEH TIP 2" THROUGH 8" STNDRD T 10" & 12" STNDRD T 2" THROUGH 8" FEMLE T 10" & 12" FEMLE T SIZE 2" " " " " " " SIZE 2" " " " " " " SIZE When setting up a sewer by-pass pumping application, T or Y connections can be used to tie in a back-up pump's suction and discharge lines to the primary system. Using two Wil-loc flange check valve assemblies and one Y allows both the primary and the back-up pump in a by-pass application to be quickly and easily connected to a single discharge line. 2" THROUGH 8" INLINE T 10" & 12" INLINE T T SOKET SPES Specs to 1/8" & subject to change. T MLE SPES Specs to 1/8" & subject to change. 2" " " " " " "
18 -17 GLVNIZED SYSTEM OMPONENTS SIZE PRT NUMER WEIGHT GLVNIZED END PLUG LL / MLE 2" 090 EP lbs 3" 090 EP lbs 4" 090 EP lbs 6" 090 EP lbs 8" 090 EP lbs GLVNIZED -STYLE END PLUG LL / MLE 10" 091 EP lbs 12" 091 EP lbs -STYLE DOULE LL SHOWN GLVNIZED END P SOKET / FEMLE 2" 100 E lbs 3" 100 E lbs 4" 100 E lbs 6" 100 E lbs 8" 100 E lbs GLVNIZED -STYLE END P SOKET / FEMLE 10" 101 E lbs 12" 101 E12 * lbs 12" Galvanized Locking ar sold separately. GLVNIZED DOULE LL / MLE 2" 110 D lbs 3" 110 D lbs 4" 110 D lbs 6" 110 D lbs 8" 110 D lbs 10" 111 D lbs 12" 111 D lbs PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. -STYLE DOULE SOKET SHOWN GLVNIZED DOULE SOKET / FEMLE 2" 120 DS lbs 3" 120 DS lbs 4" 120 DS lbs 6" 120 DS lbs 8" 120 DS lbs 10" 121 DS lbs 12" 121 DS12 * lbs WIL WIL-LO
19 GLVNIZED SYSTEM OMPONENTS -18 2" THROUGH 8" END PLUG 10" & 12" END PLUG END PLUG LL / MLE SPES Specs to 1/8 & subject to change. SIZE 2" " " " " " " 8.35 END P SOKET / FEMLE Specs to 1/8 & subject to change. PRIE ND DISOUNT STRUTURES SUJET TO HNGE WITHOUT NOTIE. WIL WIL-LO TEH TIP 2" THROUGH 8" END P 10" & 12" END P DOULE LL / MLE DOULE SOKET / FEMLE End caps and plugs may be used for several purposes, such as closing off the end of a pipeline, capping unused branches on T s and Y s, vacuum/pressure testing of pumps or pipe, or capping pump fittings during transport. For easier coupling (especially of larger sizes) lubricate new Wil-loc O-rings. This will allow the ball to seat into the socket easier during first time usage. SIZE 2" " " " " " " DOULE LL / MLE Specs to 1/8 & subject to change. SIZE 2" " " " " DOULE SOKET / FEMLE Specs to 1/8 & subject to change. SIZE 2" " " " " 10.24
20 -STYLE SSEMLY INSTRUTIONS 1 2 STEP ONE Insert the ball into the socket so that the ball seats loosely against the O-ring inside the socket. STEP TWO Reach around the socket with the short locking jaw and seat its gripping edge securely into the grooved lip on the back side of the socket. 3 4 STEP THREE While keeping tension on the short locking jaw so that it remains in place, open the lever arm attached to the "long" locking jaw so that it extends to reach behind the socket and seat securely into the groove lip. STEP FOUR Finally, ensure that the leading edge of the ball is aligned just enough so that it does not cut into the O-ring surface, then close the lever arm (or pull towards the barbed hose shank) and lock the ball into the socket. -STYLE SSEMLY INSTRUTIONS 1 2 STEP ONE Insert the ball into the socket so that the ball seats loosely against the O-ring inside the socket. STEP TWO Reach around the locking ring with the short locking jaw and seat its gripping edge securely into the grooved lip on the back side of the locking ring. 3 4 STEP THREE STEP FOUR * While keeping tension on the short locking jaw so that it remains Finally, ensure that the leading edge of the ball is aligned enough so in place, extend the long locking jaw forward to reach behind the that it does not cut into the O-ring surface, then (with 12" fittings) locking ring and seat the gripping edge securely into the grooved lip. insert the leverage bar into the hole provided on the base of the long jaw and pull back toward the barbed shank to lock the ball into the socket. * NOTE: 10" -Style Wil-loc female/socket fittings have lever locking handles permanently attached to the long jaw mechanism. Locking action is similar to the -Style lever arm. For additional information about the assembly or use of Wil-loc Quick oupling products, contact customer service at WIL WIL-LO
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
More informationSTEEL PIPE NIPPLES G1616 STANDARD BLACK STEEL NIPPLES ITEMS HIGHLIGHTED
STEEL PIPE NIPPLES Pipe PRICE Part No. Size Length EACH G1616 STANDARD BLACK STEEL NIPPLES G1616-0XC 1 8" Close $ 2.00 G1616-0X1.5 1 8" 1 1 2" 2.20 G1616-0X2 1 8" 2" 2.30 G1616-0X2.5 1 8" 2 1 2" 2.50 G1616-0X3
More informationHose Menders. We offer hose menders in a variety of materials to suit the products being conveyed. G20N NYLON HOSE MENDER
Hose Menders We offer hose menders in a variety of materials to suit the products being conveyed. Hose PRICE EACH Pkg G0N NYLON HOSE MENDER Hose PRICE EACH Pkg G0S PLATED STEEL HOSE MENDER G0S-038 3 8"
More informationHose Menders. We offer hose menders in a variety of materials to suit the products being conveyed. G20N NYLON HOSE MENDER
We offer hose menders in a variety of materials to suit the products being conveyed. Hose Part Hose PRICE EACH Pkg Part Hose PRICE EACH Pkg G20S PLATED STEEL HOSE MENDER G20S-038 3 8" $ 2.30 $ 2.10 5 G20S-050
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
More informationParts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b
More informationBRASS BRASS FITTINGS 90 0 FEMALE ELBOW 90 0 FORGED FEMALE ELBOW 45 0 FEMALE ELBOW UNION TEE UNION FORGED TEE SAE# Approx. Wt. Lbs.
RSS FITTINGS RSS 90 0 FEMLE ELOW 2200P 3500 302 200 Part # Thread Size pprox. 28-001 1/8 0.55 0.56 0.09 28-002 1/4 0.78 0.68 0.13 28-003 3/8 0.84 0.81 0.16 28-004 1/2 1.09 1.00 0.34 28-005 3/4 1.16 1.25
More informationTable of Contents: TOPIC: Safe Operation: READ THIS FIRST Page: 3 Warranty 4 Specifications 4 Installation 5-7 Operating Instructions 8 Parts Diagram
INSTALLATION & OPERATIONS MANUAL FlexArm B-19 FlexArm Inc. Division of Midwest Specialties, Inc. 851 Industrial Drive Wapakoneta, Ohio 45895 419-738-8147 Book Part No 360740 12/2014 1 Table of Contents:
More informationCoupling Dimensions Bolts Max. End. Allow Pipe Outside. Load Size Dia. End Sep. A B C No. Size x Length kg
OUPLINGS Style Reducing oupling Features Reducing oupling provides direct reduction on the pipingrun, without any accesories onsists of reducing gaskets and a steel washer which prevents entry of the smaller
More informationSTEEL NIPPLES BLACK BRASS & GALVANIZED FITTINGSSCH 40
1/8" DIMETER STEEL NIPPLES BLCK BRSS & GLVNIZED SCH 40 Length Box/Case pprox. Galv 56-001 1.89 X Close (3/4") 5/600 0.02 57-001 1.34 56-002 1.95 x 1-1/2" 5/600 0.03 57-002 1.51 56-003 2.19 x 2" 5/600 0.04
More informationDIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
More informationCONNECTORS VHP UNIONS LOW PRESSURE UNIONS THREADED ADAPTERS BARBED ADAPTERS PAGE 36 PAGE 40 PAGE 48 PAGE 58.
34 CONNECTORS VHP UNIONS PGE 36 LOW PRESSURE UNIONS PGE 40 THREDED DPTERS PGE 48 RED DPTERS PGE 58 SEE STRRED PRODUCTS FOR TOP SELLERS! Connectors Reference CONNECTORS 35 Connectors Reference Chart This
More informationEPX2555 Advantage Series Piston Pump
EPX Advantage Series Piston Pump Owner s Manual Do not use this equipment before reading this manual! Model Numbers: 00 Upright Cart Complete 00 Low Boy Cart Complete NOTE: This manual contains important
More informationIllustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine
Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...
More informationSECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE
SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBERS BEFORE G10000 WITH SERIAL NUMBERS AFTER G00000 FOR DOWN PRESSURE HYDRAULICS WITH
More informationCast Iron Valves. JIS 5K/10K, Class 125
Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve Type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI
More informationRL-H80 PARTS LIST # K
RL-H80 PARTS LIST # 102837K USE THIS PARTS LIST FOR: Hoist Serial Number: 2733 to For older hoists use the following: Parts List No. 102837G for Serial Number 2485 to 2732 IF YOUR HOIST DOES NOT FALL WITHIN
More informationGPX 1250 Gas Piston Pump
GPX 0 Gas Piston Pump Owner s Manual Model Number 0000 SprayTECH 0 Fernbrook Lane Minneapolis, MN Technical Assistance: -00-- Order Entry: -00--00 Fax: -00--0 www.spraytechinc.com Printed in the U. S.
More informationSECTION FIVE - SANITARY - MANHOLES
Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD
More informationVRX & VR12. GrainVac
VRX & VR12 GrainVac REM GRAINVACS VRX & VR12 All aspects of REM GrainVacs are examined, questioned and extreme tested individually and as part of the whole system, not just in controlled environments,
More informationHOW TO ORDER SWIVEL JOINTS
HOW TO ORDER SWIVEL JOINTS Emco Wheaton offers a wide variety of swivel joints to fit almost any application. In order to assist you in ordering the Correct swivel joint, we have developed a guideline
More informationParts Manual Kleen Sweep 32R Rider Sweeper
Parts Manual Kleen Sweep 32R Page 2 Table of Contents Side broom R.H., part 1... Side broom R.H., part 2... Front wheel drive... Accelerator... Steering... Seat group... Group of main sweeper roller, part
More informationCONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
More informationMechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems
Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the
More informationMultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
More informationPVC PRESSURE SYSTEMS. Fittings / Pipes
D PVC PRESSURE SYSTEMS Fittings / Pipes PRESSURE FITTINGS BENDS 15mm x 45 801-15-45 15mm x 90 801-15-90 20mm x 45 801-20-45 20mm x 90 801-20-90 25mm x 45 801-25-45 25mm x 90 801-25-90 32mm x 45 801-32-45
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL MEGABLADE TM V-WING TM SERIES SNOW PLOW WITH SERIAL NUMBER AFTER MBV00000 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International, Inc. ProControl, MegaBlade,
More informationM-2300-ZX Focus SVT Brake Conversion Kit INSTRUCTION SHEET
Please contact the Tech Hot Line for the most current instruction information (586) 468-1356!!! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION!!! OVERVIEW: This kit is designed
More informationTechnical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
More informationMounting Options. Maintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions.
763.422.2600 Spec-00560 F763.422.22 Mounting Options SYSPEND 28-MAX Suspension System Mounting Options SYSPEND 28-MAX Suspension System SYSPEND 28-MAX Suspension System, Type 2 TM INDUSTRY STANDARDS Maintains
More informationItem 305D 3-Piece Ball Valve
ZIPSON'S 0, -piece high performance ball valve with ISO direct mounting pad is designed for the high pressure industrial pipe line in full port product. To compare the economic valve in the market, Zipson
More informationStainless Steel Hatch Fasteners Page
Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back
More informationJOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
More informationParts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
More informationTimken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
More information2 x Dynamic Arms on 135 Post with C-Clamp
Installation Guide AWMS-2-D13-C 2 x Dynamic Arms on 135 Post with C-Clamp COMPONENT CHECKLIST RANGE A AWM-LC Post Clamp B AWM-AD Dynamic Arm (x2) C AWM-P13 135 Post D AWM-FC C-Clamp CONTENTS C-Clamp Page
More informationTechnical Data. Care and Maintenance
Worldwide Contacts www.tyco-fire.com GRINNELL G-FIRE Grooved Fittings, Ductile Iron General Description GRINNELL G-FIRE Grooved Fittings provide an economical and efficient method of changing direction,
More informationCLIMB2 DUAL MONITOR SIT/STAND WORKSTATION
CLIMB2 DUAL MONITOR SIT/STAND WORKSTATION CLIMB2 Rev A 3/17 Model CLIMB2-SLV ASSEMBLY AND ADJUSTMENT CLIMB2 PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
More informationDuo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
More informationAir-Pro Blue Polyethylene (PE) Compressed Air Piping System
- Specification Blue Polyethylene (PE) Compressed Air Piping System REV:IN0512PE Materials: ASTM D3350 cell classification PE346544C or better. Resin shall comply with FDA Code of Federal Regulators (CFR),
More informationMaintains NEMA Type 12 and IEC IP55 enclosure rating when properly installed per Hoffman instructions.
Spec-00560 Mounting Options SYSPEND 28-MAX Suspension System SYSPEND 28-MAX Suspension System, Type 2 INDUSTRY STANDARDS Maintains NEMA Type 2 and IEC IP55 enclosure rating when properly installed per
More informationGRINNELL Figure 730 Mechanical Tees and Crosses Threaded / Grooved General Description. Technical Data. Page 1 of 8 JANUARY 2014 G210
Worldwide ontacts www.grinnell.com GRINNLL Figure 730 Mechanical s and es Threaded / General escription The GRINNLL Figure 730 Mechanical s provide an additional threaded or grooved outlet in existing
More informationSpare Parts List Hydraulic Hammer. HM 720 Eco (V)
Spare Parts List Hydraulic Hammer HM 720 Eco (V) Pt. Id. No. 3361 8557 11 Valid from: 09/2003 GB Spare Parts List Hydraulic Hammers HM 720 Eco HM 720 Eco V E Atlas Copco Construction Tools GmbH Atlas
More informationDescription: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447
Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationTechnical Data. Vacuum service up to a maximum of 24 inch Hg (610 mm of Hg) and compressed air up to a maximum of 145 psi (10 bar).
Worldwide ontacts www.grinnell.com G-PRESS opper Fittings thru Inch General Description The GRINNELL G-PRESS opper Fittings provide a complete line of mechanically joined fittings for inch thru inch size
More informationBLACK & GALVANIZED SCH 40 STEEL NIPPLES
BLACK & GALVANIZED SCH 40 BLACK AND GALVANIZED Product Specifications Welded steel pipe nipples both galvanized and black in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe
More informationRD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
More informationDIGIPLAN presents. Portable Folding Chair. Unfolded View. Folded Side View. 2004/01/02 rev
WWW..DIGIPLN..C DIGIPLN presents Portable Unfolded View Folded Side View 00/0/0 rev.0 WWW..DIGIPLN..C We are offering these plans for no charge as an example of what you can expect when you purchase other
More informationPureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
More informationProdigy Color-on-Demand System Generation III
Prodigy Color-on-Demand System Generation III Customer Product Manual Issued 10/10 For parts and technical support, call the Finishing Customer Support Center at (800) 433-9319. This document is available
More informationD ISCONNECTS Q UICK. Autolok Quick Disconnects. Kamlok Quick Disconnects
Q UICK D ISCONNECTS Autolok Quick Disconnects Kamlok Quick Disconnects Q UICK D ISCONNECTS OPW Engineered Systems offers a comprehensive line of quick disconnect products, including Autolok and the world
More informationSpray Gun Kit Multi-Pro 1200/1250 Turf Sprayer and Workman 200 Spray System
Form Number 3352-887 Spray Gun Kit Multi-Pro 1200/1250 Turf Sprayer and Workman 200 Spray System Model No. 41133-250000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please
More informationVacuum Maintenance Manual (EXCERPT Tim Benedict)
1. Position a ladder, scaffold, or work stand, on the right side of Vacuum Skid where the blower motors are installed. 2. Locate the six (6) vacuum hoses connecting the blower motors to the HEPA housings
More informationPGS10 Series Pressroom Gripper System
PGS10 Series Unique, patented, modular design uses common components to reduce your purchase price and stocking requirements. Features a robust hardened steel chassis and grip force up to 450 lb at 80
More informationSCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
More informationGXT 665R Mobile Shear PARTS MANUAL
GXT 665R Mobile Shear PARTS MANUAL CONTACT INFORMATION World Headquarters Genesis Attachments 1000 Genesis Drive Superior, WI 54880 USA Toll Free: 888-SHEAR-IT (888-743-2748) Phone: 715.395.5252 Fax: 715.395.5255
More informationSECTION 5 STEEL C-PLOW
TL -PLOW 00 TION TL -PLOW FOR RI 00 -PLOW PLOW OMPONNT PAG MOLDBOARD AMBLY PAG QUADRANT / PUH FRAM AMBLY PAG LIFT FRAM AMBLY PAG POWR UNIT OVR AMBLY / THIK UTTING DG PAG URB GUARD KIT WAR PLAT KIT PAG
More information4SP/6SP Series. One Piece Bite-the-Wire Spiral Hose Ends. For use with H464, H470 and H485 Hose. Marketing Catalog
For use with 464, 470 and 485 ose Marketing Catalog One Piece Bite-the-Wire Spiral ose Ends 4SP/6SP Series ose Ends eavy wall thickness maintained 4-SPIR or 6-SPIR and hose size stenciled on socket Bite-the-Wire
More informationAPI/EI RD EDITION COUPLER UPGRADE INSTALLATION INSTRUCTION
API/EI 1584 3 RD EDITION COUPLER UPGRADE INSTALLATION INSTRUCTION FOR AVERY HARDOLL PRESSURE CONTROL ELBOW Meggitt Controls Part Number: CCMY7300M2, CCMY7309M2, F251A, AND 80324 Report No.: 7287 04 May
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More informationGrainVac Options & Accessories
SUITABLE FOR Midwest 552 GrainVac 1026 GrainVac 1026A GrainVac 1026B GrainVac 2100 GrainVac 2500 GrainVac 2700 GrainVac 3700 GrainVac VRX GrainVac VR12 Customize your REM GrainVac to suit your specific
More informationDishmachine Division Please call for pricing or
Dishmachine Division Please call for pricing -00-- or -00-5- ELECTRICAL BOX Page 0 and PLUMBING Page WRAPPER Page - PAN Page -5 STAND Page and KLE--HL Convertible Dishwashing Machine Part No. 05 5 5 0
More informationMULTI-V FUL-GRIP SHEAVES AND BUSHINGS FUL-GRIP (QD) BUSHINGS FUL-GRIP (QD) SHEAVES STANDARD MULTI-V SHEAVES SPECIAL MADE-TO-ORDER SHEAVES
MULTI-V FUL-GRIP SHEAVES AND BUSHINGS FUL-GRIP (QD) BUSHINGS FUL-GRIP (QD) SHEAVES STANDARD MULTI-V SHEAVES SPECIAL MADE-TO-ORDER SHEAVES Industry puts Maurey sheaves on more drives every year simply because
More informationPIONJÄR. Spare parts list. Petrol drills and breakers 120, 120 AV, 121 A, 130, 130 AV, 131 A
PIONJÄR 0, 0 AV, A, 0, 0 AV, A Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 00 0b 00 PIONJÄR 0, 0 AV, A, 0, 0 AV, A Contents Contents General Information................................................................
More informationWe provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
More informationMax Zoom. Parts Manual. Models Max Zoom Max Zoom B 9/09 Printed in USA
Max Zoom Parts Manual Models - Max Zoom 0 - Max Zoom 0000B /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
More informationGrease Guns PRELIxx and PRELIxx PRO
Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical
More informationTimken Lubricant Delivery Systems. Friction management solutions to keep systems running smoothly
Timken Lubricant Delivery Systems Friction management solutions to keep systems running smoothly SM G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication is
More informationDesign. Application. All closure sizes are available with three different fiber management systems included in the pack.
Description Design The Universal Closures consist of two plastic end caps type (description see on page 80 f.) and a plastic closure tube. The longitudinally split closure tube is closed with two plastic
More informationUnitary Construction Double Wall Piping System
Unitary Construction Double Wall Piping System 221 Page intentionally left blank 222 Co-Extruded Double Containment Chem Proline Black PE Resin Crack resistant proprietary resin formulation Excellent abrasion
More informationV GM C4500 C5500
Illustrated Parts List for VMAC System System V900099 2008-2007 GM C4500 C5500 LMM Duramax 6.6L Diesel without dual alternators System V900098 2007-2006 GM C4500 C5500 Duramax 6.6L Diesel without dual
More informationStafgrijpers. Proger Spantechniek BV - Hillegom - telefoon (0252) telefax (0252)
Stafgrijpers OMPT N R PULLERS Great for use with small N lathes compact design minimizes tool interference. Flexible heat-treated steel fingers provide strong gripping force. Serrations ensure that components
More informationHP STD 33" Cut (S/N ) Page 1 of 15 Drive Assembly
34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 1 of 15 Drive Assembly 34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 2 of 15 Drive Assembly 1 1 Engine, 8 HP, Recoil Start Order
More informationType. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
More informationComposite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
More informationPEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
More information"PVL" SERIES. Fixed Displacement - Single PVL1. Up to 5 MPa (730 PSI), 10.6 cm /rev (.647 CU.IN./rev)
"PVL" SERIES Fixed Displacement - Single PVL Up to 5 (70 ), cm /rev (7 CU.IN./rev) Pub. EC-0 The PVL series single pumps are designed for use with small size machine tools requiring comparatively low pressure
More information72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
More informationFlareless Bite Type Fittings
Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU
More informationERGONOMIC MODULAR RAIL V3 M-LOK. ALG Defense 800 East Walnut Street North Wales, PA algdefense.com
TM ERGONOMIC MODULAR RAIL V3 M-LOK ALG Defense 800 East Walnut Street North Wales, PA19454 610.635.8937 algdefense.com TM ERGONOMIC MODULAR RAIL V3 M-LOK PACKAGE CONTENTS Ergonomic Modular Rail V3 with
More informationCH-PVDF RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS. Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov.
RED & NATURAL PVDF Kynar SCHEDULE 80 PIPE, VALVES & FITTINGS CH-PVDF-1115 Effective Nov. 16, 2015 Supersedes CH-PVDF-1113 dated Nov. 25, 2013 Suggested list prices subject to change without notice. UPC
More informationKamlok Series. The World s Most Popular Cam and Groove Quick Disconnect
Kamlok Series The World s Most Popular Cam and Groove Quick Disconnect OPW Engineered Systems Kamlok Quick Disconnects are the industry standard in cam and groove couplers for safety and ease of use. All
More information8100, 8200, , 8202, 8203, 8204, 8205, 8206
800, 8200, 8300 820, 8202, 8203, 8204, 8205, 8206 W R A, O USA T: 800 32 7950 440 998 2788 F: 440 992 2925... 023208 2 INSTRUCTIONS FOR 3/4,, -/4 DIAMETER TAPS FIGURE A B C D E F G HOT TAP SPINDLE HOT
More informationF250 F550
AIR INNOVATEDTM Illustrated Parts List for VMAC System V900111 Ford 6.8 L Triton V 10 2011 2014 F250 F550 www.vmacair.com Illustrated Parts List for VMAC System V900111 FORD 6.8 L TRITON V10 2014-2011
More informationStandard Bellows Metering Pumps
Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke
More informationUTS UTS. UTS provides a connection that performs faster, easier, safer and more reliable, it makes :
Company Profile UTS Contents Company profile... 2 Contents... 3 Description... 3 Overview TRIM TRIO... 4 Major features & benefits 5-9 Contact styles... 5 Rapid and secure locking system... 6 Rapid and
More informationRATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE
RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE198 MDI / MDIS Choke Valves Unique. Precise. Quality. Reliable. MDI / MDIS SERIES CHOKE VALVES FEATURES Benefits T aylor Valve MDI / MDIS Series Chokes are made with wear resistant material to extend
More informationDesign of a Precision Robot Wrist Interface. Patrick Willoughby Advisor: Alexander Slocum MIT Precision Engineering Research Group
Design of a Precision Robot Wrist Interface Patrick Willoughby Advisor: Alexander Slocum MIT Precision Engineering Research Group Project Summary Problem: Current bolted robot wrist replacements are inaccurate,
More informationBALL VALVE ACCESSORIES
000 Retrofit Kits Easily converts any system over to all 000 style valves for consistent valve type and uniform maintenance. Special extended socket style End onnectors () allow retrofit replacement of
More informationFormulate Designer Series 20 Backwall - Kit 11
Formulate Designer Series 20 Backwall - Kit 11 FMLT-DS-20-11 Formulate Designer Series 20ft displays have unique stylistic features and shapes, are portable and easy to assemble. The aluminum tube frame
More informationKF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Especially for forming joints with fixed pipelines or in certain cases between
More informationSYLLABUS FOR PLUMBING & SANITARY TRADE
SYLLABUS FOR PLUMBING & SANITARY TRADE Duration at Skills Training Institute (Spread in three months) : 600 Hrs 1. Introduction to ITI : 3 Hrs 2. Introduction to the Trade : 3 Hrs 3. Introduction to Trade
More informationUniversal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
More informationrobust advanced technology Accessories » for mobile and stationary Ringler suction systems
www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
More informationTEC APO 200 OWNER S MANUAL
TEC APO 200 OWNER S MANUAL 2005 IMPORTANT - PLEASE READ THIS MANUAL BEFORE USING YOUR TELESCOPE SAFETY WARNINGS Do not look at the sun through the telescope! Viewing the sun through the telescope without
More information