BC 35 DOUBLE-CHANNEL. Submersible pumps. PERFORMANCE RANGE Flow rate up to 1900 l/min (114 m3/h) Head up to 31 m

Transcription

1 BC 5 Suersile pups DOUBLE-CHANNEL Sewage water Civil use Industrial use PERFORMANCE RANGE Flow rate up to 900 ( /h) Head up to APPLICATION LIMITS 0 axiu iersion depth (with a sufficiently long power cale) Maxiu liquid teperature +0 C Passage of suspended solids up to Ø 5 Miniu iersion depth for continuous service: 70 INSTALLATION AND USE The BC 5 series of pups, anufactured fro stainless steel and heavy gauge roust cast iron, resistant to arasion and long-lasting, are fitted a DOUBLE-CHANNEL ipeller and are therefore suitale for draining dirty, sewage and refluent water, and water ixed with putrid ud. They are suitale for installation in sewers, tunnels, excavations, canals, underground car parks, etc. PATENTS - TRADE MARKS - S Patent Pending CONSTRUCTION AND SAFETY STANDARDS 0 long power cale External float switch and control ox for single-phase versions EN 605- IEC 605- CEI 6-50 EN 600- IEC 600- CEI - OPTIONS AVAILABLE ON REUEST Other voltages or 60 frequency CERTIFICATIONS Copany with anageent syste certified DNV ISO 900: UALITY 7 50 BC 5

2 CHARACTERISTIC CURVES AND PERFORMANCE DATA 50 n= 900 in US g.p.. Ip g.p.. feet 0 BC75/ BC55/5 75 Head H (etres) 0 5 BC0/ Flow rate 0 ³/h POWER (P) ³/h Three-phase kw HP BC 0/ BC 55/5 5.5 H etres BC 75/ = Flow rate H = Total anoetric head Tolerance of characteristic curves in copliance with EN ISO 9906 Grade B. BC

3 BC 5 DOUBLE-CHANNEL POS. COMPONENT CONSTRUCTION CHARACTERISTICS PUMP BODY Cast iron with an Epoxy Electro Coating treatent, with threaded port in copliance with ISO 8/ IMPELLER DOUBLE-CHANNEL type in cast iron with an Epoxy Electro Coating treatent MOTOR CASING Stainless steel AISI 0 CASING Cast iron with an Epoxy Electro Coating treatent 5 MOTOR SHAFT Stainless steel AISI 6 TWO MECHANICAL SEALS SEPARATED BY AN OIL CHAMBER Seal Shaft Position Materials Model Diaeter Stationary ring Rotational ring Elastoer AR-7 Ø 7 Motor side Silicon caride Graphite NBR AR-5 Ø 5 Pup side Silicon caride Silicon caride NBR 7 BEARINGS 606 ZZ C / 60 ZZ C 8 ELECTRIC MOTOR BC 5: three-phase 00 V - 50 with theral overload protector incorporated into the winding 9 Insulation: class F Protection: IP X8 7 9 POWER CABLE H07 RN-F type Standard length 0 etres BC 5

4 San Bonifacio (VR) ITALY - Tel PUMP H H ax H in V~ in- P P kw- HP In I.CL. C. µf VL IP t ax C MADE IN ITALY Rel. W A Therally protected Continuous duty 000I8MPE DIMENSIONS AND WEIGHT Standard installation h h c p (iniu) a d (iniu) Passage DIMENSIONS Three-phase of solids a c h h d p ~ BC 0/ BC 55/5 Ø BC 75/ FLANGED PORT ABSORPTION FLANGE F K D HOLES Three-phase DN N. Ø () BC 0/5 BC 55/5 BC 75/5 65 (PN0) ½" Three-phase BC 0/5 BC 55/5 BC 75/5 VOLTAGE 00 V 6. A 8. A.5 A PALLETIZATION GROUPAGE Three-phase n. pups BC 0/5 F K D BC 55/5 BC 75/5 BC

5 BASE PEDESTAL KIT VX50 VX65 BC5 - Footing connection - Slide guide (Also to e ordered separately) - Interediate support (Not included. To e ordered eparately) - Support for the guide tues (A) (B) (C) A) HORIZONTAL DELIVERY VERSION WITH ¾" GUIDE TUBES For VX /50 Cod. ASSPVX50 DN " Kit consisting of: footing connection slide guide with screws and seals support for the guide tues B) VERTICAL DELIVERY VERSION WITH ¾" GUIDE TUBES For VX /50 Cod. ASSPVX50V DN ½" For VX /65, BC /5 Cod. ASSPVX65V DN " Kit consisting of: footing connection coplete with counterflange slide guide with screws and seals support for the guide tues STANDARD INSTALLATION. Pup. Footing connection. Guide tues. Support for the guide tues 5. Lifting chain 6. Control ox 7. Alar float switch 8. Starting float switch 9. Stop float switch 0. Non-return valve C) VERTICAL DELIVERY VERSION WITH " GUIDE TUBES For VX /50 Cod. ASSPVX50V DN " For VX /50, VX /65, BC /5 Cod. ASSPVX65V DN " Kit consisting of: footing connection coplete with counterflange slide guide with screws and seals support for the guide tues 6 SLIDE GUIDE (Also to e ordered separately) For VX /50 with guide tues Ø ¾" For VX /50 with guide tues Ø " For VX /65, BC /5 with guide tues Ø ¾" For VX /65, BC /5 with guide tues Ø " Coplete with screws and seals Cod. ASSFL009 Cod. ASSFL050 Cod. ASSFL00 Cod. ASSFL INTERMEDIATE SUPPORT (To e ordered separately) For guide tues Ø ¾" For guide tues Ø " Cod. 859SV0INTFA Cod. 859SV9INTFA 0 8 GUIDE TUBES (AISI 0 stainless steel) Guide tue Ø ¾" Cod. 5SARTG005 Guide tue Ø " Cod. 5SARTG006 9 In order to ensure staility, insert the interediate support: every etres with ¾ guide tues (copulsory) every etres with guide tues (recoended) Maxiu length of the tue plank: 6 etres BASE PEDESTAL KIT VX50 VX65 BC5

6 San Bonifacio (VR) ITALY - Tel PUMP MADE IN ITALY Rel. H H ax H in V~ in- P P kw- HP In I.CL. C. µf VL IP t ax C W A Therally protected Continuous duty 000I8MPE San Bonifacio (VR) ITALY - Tel PUMP MADE IN ITALY Rel. H H ax H in V~ in- P P kw- HP In I.CL. C. µf VL IP t ax C W A Therally protected Continuous duty 000I8MPE DIMENSIONS (Horizontal delivery version) a Øn i Ø i i h h i c h p a Version with " guide tues i Ø c i DN d e DN i6 i5 Øg h h Passage of solids PORT DIMENSIONS Single-phase Three-phase DN a c p h h h h i i i i i5 i6 Øg Ø Øn VX 0/0 VX 0/0 VX 0/0 Ø 0 " ¾" VX 55/0 67 DIMENSIONS (Vertical delivery version) Øn i6 i5 Øn i5 Øg i i h p Ør Version with ¾" guide tues Passage of solids PORT DIMENSIONS Single-phase Three-phase DN a c d e p h h h h i i i i i5 i6 Øg Ø Øn Ør VX 0/0 VX 0/0 VX 0/0 Ø 0 ½" ¾" 8 VX 55/0 67 VX 0/65 60 VX 55/65 Ø 65 " ¾" 8 VX 75/ BC 0/5 595 BC 55/5 Ø 5 " ¾" 8 BC 75/5 665 Version with " guide tues VX 0/65 60 VX 55/65 Ø 65 " VX 75/ BC 0/5 595 BC 55/5 Ø 5 " BC 75/ " ".5 8 BASE PEDESTAL KIT VX50 VX65 BC5 5079