Description and Operating Instructions

Transcription

1 Industrial Ethernet Descriptin and Operating Instructins KD859E03 Fig. 1: PRO3 frnt view (withut SFP mdules) Order names PRO3 ioptin PE Typ af 4-15 B 5-Prt switch with 4(3) TP- and 1(2) Small Frm-factr Pluggable (SFP) Prts Optin Pwer ver Ethernet (PSE) - 1 -

2 Nexans Advanced Netwrking Slutins Features PRO3 5-Prt switch with 4(3) TP- and 1(2) (SFP) Prts (SFP = Small Frm-factr Pluggable) 2x 100/1000 Mbps SFP mdule slts (Gigabit/Fast Ethernet Vari Prts) 4x 10/100/1000 Mbps Twisted Pair Gigabit Prt use alternate t SFP Prt 1* with ioptin PE Typ af 4-15 B External pwering f attached devices via the TP data line (endpint insertin mde A data pairs 1-2, 3-6) n TP prts 1 4 Accrding t IEEE802.3af Electrical islatin f the supply vltages frm the system Resistive Pwer Discvery methd Pwer cnsumptin f a cnnected device max W General 5-Prt switch fr cnnecting devices r users with LAN interface 1000 Mbps Gigabit Ethernet accrding t IEEE802.3z/-ab 10/100 Mbps Ethernet/Fast Ethernet accrding t IEEE802.3u 10BASE-T -> 100BASE-TX fr migrating netwrks frm 10 Mbps t 100 Mbps 100BASE-TX -> 1000BASE-T fr migrating netwrks frm 100 Mbps t 1000 Mbps Prtcl-transparent transmissin Stre and frward switch, self-learning Temperature range: -25 C t +70 C 2 alarm cntacts 1 functin cntact DIP-switch cnfiguratin Hardware Reset Management Update-ready management system fr custmized cnfiguratin Supprts Web/Telnet/SNMP/V.24 (RS232) user interfaces Cmprehensive security management, including different authenticatins (RADIUS, IEEE802.1x etc.) Several pwer inputs S1/S2, PE (PD) + PSE mnitring and signalling traps fr service Cnfigurable functin cntact Autmatic and manual setting f the transmissin mde n all prts Cmprehensive setup and mnitring features fr Pwer ver Ethernet PE (PSE) Autmatic back pressure flw cntrl can be set in half-duplex (HDX) mde Flw cntrl accrding t IEEE 802.3x can be set in full-duplex (FDX) mde SFP DMI readut and analysis with diagnstic mnitring interface (DMI) t SFF8472 etc. SFP DMI state readut, mnitring and signalling traps fr service - 2 -

3 Nexans Advanced Netwrking Slutins Enhanced management features such as DHCP, VLAN, prt priritisatin, IEEE802.1p, IPv4, IPv6, IEEE802.1Q Tagging, QS, etc. Several different alarm and signalling traps fr service and security supprt Up t 8 different categrisable trap and/r syslg destinatins V.24 (RS232) setup and cnfiguratin interface Memry card (MMC) fr string cnfiguratin files etc. SET pushbuttn fr selecting different bt sequences BtP prtcl Mechanical design Cmpact design Rbust aluminium husing Fanless system DIN-rail munting Indicatrs Easy-t-read LED cmbinatins fr displaying the perating status: S1, S2 pwer supply PSE state fr Pwer ver Ethernet supply M1, M2 alarm Run switch is ready t perate Link status: Link and Receive data indicatin per prt Speed - Speed indicatr TP-Prts: 10/100/1000 Mbps Twisted Pair interfaces Electrical interfaces accrding t IEEE BASE-T IEEE802.3u 100BASE-TX IEEE802.3ab 1000BASE-T MDI/MDI-X aut-crssver and aut-plarity 10/100/1000 Mbps Ethernet / Fast Ethernet / Gigabit Ethernet Twisted Pair prt up t 100 m Autnegtiatin / 10/100/1000 Mbps Ethernet / Fast Ethernet / full-duplex r half-duplex Shielded RJ45 sckets SFP* Slt Interfaces SFP-I plug-in slt fr n-site accmmdatin with fiber-ptic (GI, SM) r Twisted Pair plug-in mdules als in mixed cnfiguratins. The state f mdule is nly readable with SFP mdule incl. DMI** interface accrding IEEE802.3z 1000BASE-LX / 1000BASE-SX IEEE802.3u 100BASE-LX / 100BASE-SX IEEE802.3ab 1000BASE-T (Twisted pair) Pwer supply Input vltage nminal 24 VDC / 48 VDC (S1/S2)*** Redundant pwer supply - 3 -

4 Nexans Advanced Netwrking Slutins Wide Range Pwer Supply VDC Electrical islatin f the supply vltages frm the system Prtectin against plarity reversal and transients N lad sharing f S1/S2 Lw current cnsumptin Vltage indicatrs fr all supply vltages S1, S2 4-pin terminal blck, screw-n type Pwer ver Ethernet PSE 4-15 B (Optin) Accrding t IEEE802.3af Electrical islatin f the supply vltages frm the system Resistive Pwer Discvery methd PE PSE Pwer Surce Equipment (PSE) External pwering f attached devices via the TP data line (endpint insertin mde A data pairs 1-2, 3-6) n TP prts 1 4 Supply system pwer max W/prt depending n parameters f externally cnnected 48 V pwer supply (S1/2) Pwer cnsumptin f a cnnected device max W Input vltage range VDC Plarity reversal prtectin PSE indicatr Range f accessries Set f terminal blcks fr isystems - (included in scpe f delivery) RJ45 dust-prtectin caps (10 pieces) - (included in scpe f delivery) DIN-rail Munting Clip, stainless steel - (included in scpe f delivery) Munting rail fr isystems - (fr wall munting) Management Optins V.24 cnfiguratin cable MMC memry card fr isystem NexCnV3 sftware tl fr easy start-up setting f IP addresses, unit status NexManV3 sftware tl with database fr centralized netwrk service cnfiguratin, update and mnitring f yur netwrk cnfiguratin * SFP Interface - Small Frm-factr Pluggable (1G/100M Fiber-ptic r 1G Twisted Pair) ** DMI - Diagnstic Mnitring Interface *** S1..S2 refer t the different supply vltage inputs and indicatrs - 4 -

5 Nexans Advanced Netwrking Slutins Overview igigaswitch 5xxS.. (Example: PRO3) Pwer supply status S1, 2 = 24/48 VDC versin PSE = PE (PSE) - 4 users can be supplied with pwer 2x SFP-I Slts Small Frm-factr Pluggable 1x 100/1000 Mbps (Vari Slt, Prt 5) 1x 100/1000 Mbps (Vari/Cmb Slt, Prt 1*) Alarm cntacts M1/M2 Func. cnfigurable functin cntact TP indicatr: green Link and Data indicatr TP indicatr: yellw prgrammable functin LED Default = Speed (see Management) 2x 24/48 VDC cnnectin S1 / S2 (redundant) V.24/RS232 interface Cnfiguratin interface Functin and status indicatrs (switch) Rear panel: Rail munting 10-pin cnfiguratin switch (DIL) Management Cnfiguratin settings (bting) 4x User prts RJ45 10/100/1000 Mbps Prt 1-4 (if Vari Slt Prt 1* is nt equipped with SFP!) 4x Pwer ver Ethernet (PSE), Mde A Prt 1-4 fr pwer supply f a maximum f 4 users - 5 -

6 Nexans Advanced Netwrking Slutins Technical Data Parameter Unit min. typical max. Pwer Supply (S1,S2) Input vltage VDC Input current cnsumptin (24 V) A 0,44 Pwer cnsumptin (24 V) W 5,8 8 9,2 Interface cnnectr 24 V pwer supply (frnt panel) S1, S2 4-pin terminal blck, screw-n type with ioptin PE Typ af 4-15 B Parameter Unit min. typical max. Pwer supply (S1,S2) Input vltage S1/S2 fr PE (PSE) VDC Input vltage S1/S2 withut PE (PSE) VDC Input current cnsumptin (48 V), system + PE pwered devices A 0,17 1,3 1,56 2,13 (100 ms) Input pwer, ttal W 7,56 59,4 72 Interface cnnectr 24 V pwer supply (frnt panel) S1, S2 4-pin terminal blck, screw-n type Pwer ver Ethernet per Prt Output pwer, per prt Pwer level utput at PSE* Pwer level at pwered device (PD) W W 0,44 15,4 12,95 Output current, per prt A 0,35 0,5 (100 ms) TP Interface cnnectr PE(PSE)* Pin assignment f RJ45 scket n prt MDI(X) Mde A Pins 1-2 negative / pins 3-6 psitive (center tapping) * PSE pwer surce equipment - 6 -

7 Nexans Advanced Netwrking Slutins Parameter Unit min. typical max. General and mechanical specificatins Mdel Applicatin area Dimensins (Husing) Width (mm) 75 Husing design Height (mm) 105 Depth (mm) 106 IP degree f prtectin IP 30 EN Ambient temperature Aluminium case fr 35 mm DIN-rail munting in accrdance with EN (EN 50022) Optin: wall-munting Industry, statinary usage cmplete, clsed, weather-prtected munting Andised / varnished aluminium edgewise case C Operatin -25 t +70 C Strage -40 t +85 Relative humidity % up t 95 (nn-cndensing) Cling Distance recmmended fr the entire perating temperature range Cnvectin, n fan munting distance: 10 mm (left/right) 25 mm (abve/belw) Weight g 670 Switch functinal parameters Switching methd Stre and frward,, self-learning Data thrughput per prt (1000 Mbps) Packets/sec Packet buffer Mbyte 1 MAC address table, entries Number 8 k Aging timer Secnds 300 Packet length (Jumb Frames) IEEE802.1Q VLAN IDs Number 4096 Flw cntrl in HDX mde byte Back pressure thrugh 96 bit JAM Flw cntrl in FDX mde Flw cntrl in accrdance with IEEE 802.3x Alarm cntacts Alarm cntacts (M1, M2) Number 2 (Alarm cntact = pen) Alarm cntact lad capacity per cntact VDC ADC Alarm cntact interface cnnectr M1/M2 4-pin terminal blck Functin cntact Func. 2-pin terminal blck 30 1 (An pened/clsed functin cntact will activate the - 7 -

8 Nexans Advanced Netwrking Slutins Parameter Unit min. typical max. peratin sequence as cnfigured in the management!) Set Mde Set buttn (frnt panel) -> Number 4 1. Reset 2. fix IP address 3. Factry default 4. fix IP address + Factry default V.24 (RS232) pining: Pin: LAN Interface SFP and TP Pin: Descriptin RTS (DI) n.c. TxD GND RxD CTS (DO) DCD DTR DSR RI Pin (9pl. D-Sub female) 7 n.c jumper 6-9 n.c. Uplink -Interface - SFP SFP - Small Frm Factr Pluggable Interface Input/utput signals (100/1000 Mbps) Cmment: If Prt 1* is equipped with SFP, TP-prt 1 cannt be used! Standard SFP-slts Number 2 FO-SFPs accrding t IEEE802.3z 1000BASE-X IEEE802.3u 100BASE-X as a functin f the ptinal SFP mdule TP-SFPs accrding t IEEE802.3z 1000BASE-X Cmbinatins-Prt SFP 1* TP Prt 1 Diagnstic Interface (DMI) Number 2 Transmissin Mde - Speed SFP-Fiber Optic SFP-Twisted Pair Electrical interfaces (10/100/1000 Mbps) Terminal prts 1..4 Mbps Mbps 100/ Input/utput signals Standard In accrdance with IEEE BASE-T, full-, half-duplex and/r IEEE802.3u 100BASE-TX, full-, half-duplex IEEE802.3ab 1000BASE-T Interface cnnectr prt RJ-45, shielded IEEE802.3ab 1000BASE-T - 8 -

9 Nexans Advanced Netwrking Slutins Parameter Unit min. typical max. RJ45 - MDI-X pin assignment MDI/MDI-X aut-crssver feature allws RD and TD t be reversed. With the autplarity functin + / - can als be reversed. IEEE BASE-T, full-, half-duplex and/r IEEE802.3u 100BASE-TX, full-, half-duplex RJ45 - MDI-X pin assignment MDI/MDI-X aut-crssver feature allws RD and TD t be reversed. With the autplarity functin + / - can als be reversed. MDI(X) 1 BI_DA+ 2 BI_DA - 3 BI_DB + 4 BI_DC + 5 BI_DC - 6 BI_DB - 7 BI_DD + 8 BI_DD 1 RD+ 2 RD- 3 TD+ 6 TD- Nte: The abve pin assignment applies when cnnecting terminal equipment via 1:1 patch crds. Nminal impedance 100 Line length, max. m 100 Prtective circuits Prt 1..4 prtectin frm transients, (cmmn mde, diff. interference) Standards and certificatin Electrical safety Operatin/Strage Emissin Immunity Other Nte: temperature Please nte that ventilatin slits must nt be cvered after munting. Requirements IT Requirements EN Requirements EN Requirements EN CE Standard EN Standard EN EN EN Standard EN class A Standard EN , 6 kv / 8 kv EN Please ensure that the ambient temperature des nt exceed the indicated range. Please ensure sufficient ventilatin in the data cabinet r at the site f installatin. Subject t mdificatins (06/2009) - 9 -

10 Nexans Advanced Netwrking Slutins Nexans netwrk slutins are used thrughut the wrld and have prved their reliability in many different ways. Our references include leading cmpanies in the wrld, universities, industrial prperties, hspitals, authrities and banks. A LAN System which can grw with the needs f its users has t be designed right frm the very start with such a level f flexibility t ensure that supprt is prvided in particularly with frequent mves, adds and changes. With mre than 20 years experience in the develpment and prductin f ptical slutins, the systems frm Nexans prvide the reliability and the security yu expect frm yur netwrk. Nexans Deutschland GmbH Advanced Netwrking Slutins Bnnenbricher Str Menchengladbach Germany Tel +49(0) Fax +49(0) sales.ans@nexans.cm