Pilot operated 2 port solenoid valve (general purpose valve) 100 VAC 50/60Hz 110 VAC 60Hz 200 VAC 50/60Hz 220 VAC 60Hz 12 VDC 24 VDC 48 VDC 100 VDC

Transcription

1 D11/D1 Series (general purpose valve) D11/D1 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Refer to Ending 17 for more details. JIS symbol Common specifications D11: NC (normally closed) type Descriptions Standard specifications Working fluid ir, water, kerosene, oil (50 mm /s or less) OUT Working pressure differential range MPa 0.0 to 1.0 (Refer to max. working pressure differential on individual specifications.) Max. working pressure MPa IN Withstanding pressure (water) MPa Fluid temperature (Note 1) to 60 D1: NO (normally open) type mbient temperature 0 to 60 OUT eat proof class tmosphere Place free of corrosive gas and explosive gas Valve structure Pilot operated poppet, diaphragm structure IN Valve seat leakage (Note ) cm 3 /min. (NR) 0. or less (air) Mounting attitude Free (within working pressure differential range) ody/sealant ronze, nitrile rubber Note 1: No freezing Note : For D11 (NC (normally closed)), these values apply at pneumatic pressure 0.0 to 1.0 MPa, and for D1 (NO (normally open)), these apply at pneumatic pressure 0.0 to 0.5 MPa. Individual specifications Descriptions Min. working Max. working pressure diff. (MPa) pparent power (V) Power consumption (W) Port Orifice size pressure diff. ir Water, kerosene Oil (50 mm /s) Rated voltage olding Starting (mm) C DC (MPa) C DC C DC C DC 50z 60z 50z 60z 50/60z NC (normally closed) type D11 Rc1/ D11 Rc3/ * D1115 Rc1/ D110 Rc3/ D115 Rc NO (normally open) type D115 Rc1/ 15 D10 Rc3/ D15 Rc1 5 0 VC 50/60z 1 VC 60z 00 VC 50/60z 0 VC 60z 1 VDC 4 VDC 4 VDC 0 VDC *1: The types above apply up to the basic port size (Rc). Refer to ow to order for other combinations. *: Refer to DC column for maximum working pressure differential of coil with diode for D11. *3: Variation of rated voltage should be within %. *4: The values in ( ) in the power consumption DC column apply for the type with DIN terminal box. *5: The minimum working pressure differential for the port size (1/4) and (3/) is 0.05 MPa for fluoro rubber sealant / / / (.4) 15.5 (14) Mass (kg)

2 D11/D1 Series Optional specifications Sealant Coil (heat proof class) Fluid temperature (Note 1) mbient temperature Valve seat leakage (Note ) cm 3 /min. (NR) Note 1: No freezing Note : For D11 (NC (normally closed)), these values apply at pneumatic pressure 0.0 to 1.0 MPa, and for D1 (NO (normally open)), these apply at pneumatic pressure 0.0 to 0.5 MPa. Note 3: The range is 0 to 0 when using the square terminal box with light for the coil housing. Flow characteristics Fluoro rubber to 60 to 90 0 to 60 0 to 0 (Note 3) 0. or less (air) Port size Orifice (mm) NC (normally closed) type D11 Rc 1/ D11 Rc 3/ 0.19 D1115 Rc 1/ D110 Rc 3/4 0 D115 Rc 1 5 NO (normally open) type D115 Rc 1/ D10 Rc 3/4 0 D15 Rc 1 5 *1: Effective sectional area S and sonic conductance C are converted as S 5.0 x C. Flow characteristics C[dm 3 /(s bar)] b Cv flow factor S (mm ) N/ US/ F/ F/ FV FW/ F FL P/D PK/ DK For dry air Explosion proof V/ VL S/ SV NP/NP/ NVP C/ MX/ Other.P. systems PD/FD/ PJ CVE/ CVSE CPE/ CPD Medical analysis Custom order eneral purpose valve 47

3 D11/D1 Series ow to order D O 3 S C0V ctuation Port size E Coil housing Other options F Manual override (Locking) I Surge suppressor Mounting plate J Rated voltage Symbol Descriptions ctuation 1 NC (normally closed) type NO (normally open) type Port size N 1 / 4 3 / 1 / 3 / 4 1 C Type of screw C Type of screw Rc NPT D ody, sealant combination D ody, sealant ody Sealant Treat Remarks combination *1 O Nitrile rubber ir, water, kerosene, oil (up to 60 ) ronze * Fluoro rubber ir, kerosene, oil (up to 90 *1) *3 D Stainless Nitrile rubber ir, water, kerosene, oil (up to 60 ) E steel Fluoro rubber ir, kerosene, oil (up to 90 *1) Nitrile rubber ir, water, kerosene, oil (up to 60 ) ronze J Fluoro rubber ir, kerosene, oil (up to 90 *1) Oilprohibit L Stainless Nitrile rubber ir, water, kerosene, oil (up to 60 ) M steel Fluoro rubber ir, kerosene, oil (up to 90 *1) Std. Option D11 D1 Refer to page 36 in the introduction for details on the material combinations. E to J <Example 1 of model number> D11003C0V The combinations indicated with a Series : D11 ctuation : NC (normally closed) type Port size : Rc3/4 C Type of thread : Rc D ody, sealant combination : ody bronze, sealant nitrile rubber E Coil housing : Open frame lead wire F to : lank J Rated voltage :0 VC 50/60 z, 1 VC 60 z Refer to the following page for details on the coil housing, other options and voltage, etc. in the above table can be manufactured. <Example of model number> D115DCSC00V Series: D1 ctuation : NO (normally open) type Port size : Rc1/ C Type of thread : D ody, sealant combination : ody stainless steel, sealant nitrile rubber E Coil housing : rommet lead wire F Manual override (Locking) : Selected : lank I Surge suppressor : With surge suppressor J Rated voltage : 00 VC 50/60 z, 0 VC 60 z Note on model no. selection Note on (D) *1: (D): When selecting 4, 4K, 4. *: The stainless steel body is not available for () (port size) (1/4) or (3/). *3: The standard body material for the () (port size) (1/4) and (3/) is brass. 4

4 D11/D1 Series For (E) to (J), the combinations indicated with symbols can be manufactured. Note that if the (F) to (I) options are not required, no symbol is indicated. E Coil housing F Other options I J Rated voltage Cable gland Conduit Descriptions (Marine cable gland) (Conduit pipe) Descriptions 15a 15b 15c CTC 19 1 / 3 C E 3K 3 3P 3Q 4 4K 4 5 5K 5 5P 5Q C Std. Option Open frame lead wire rommet lead wire DIN terminal box (1/) DIN terminal box (Pg11) DIN terminal box + small light (Pg11) Open frame type Open frame type Open frame type (eat proof class ) (Diode integrated) Square terminal box (1/) Square terminal box + light (1/) Square terminal box (IP65 or equivalent) (1/) (1/) Square terminal box + light (IP65 or equivalent) Lead wire Square terminal box (1/) Square terminal box + light (1/) Lead wire Square terminal box Square terminal box + light Square terminal box (IP65 or equivalent) (1/) Square terminal box + light (IP65 or equivalent) (1/) Manual override (Locking) Mounting plate rommet lead wire 300 mm D E F D E F D E F Surge suppressor S S S S 0 VC, 00 VC, 1 VDC, 4 VDC, 4 VDC, 0 VDC 0 VC, 00 VC 0 VC, 00 VC, 1 VDC, 4 VDC, 4 VDC, 0 VDC 0 VC, 00 VC, 4 VDC 0 VC, 00 VC, 1 VDC, 4 VDC, 4 VDC, 0 VDC 0 VC, 00 VC, 4 VDC, 0 VDC 0 VC, 00 VC, 1 VDC, 4 VDC, 4 VDC, 0 VDC 0 VC, 00 VC, 4 VDC, 0 VDC 0 VC, 00 VC 0 VC, 00 VC Refer to the following precautions for (E) to (J). Conduit (CTC19) (1/) N/ US/ F/ F/ FV FW/ F FL P/D PK/ DK For dry air Explosion proof V/ VL S/ SV NP/NP/ NVP E DIN terminal box C/ MX/ K 3 4K 4 5K 5 3P 3Q 5P 5Q Open frame rommet lead wire 300 mm 4 (eat proof class ) 5 (Diode integrated) Open frame square terminal box 4K, 4 (eat proof class ) 5K, 5 (Diode integrated) Open frame square terminal box (IP65 or equivalent) 5P, 5Q (Diode integrated) Refer to page for coil selection. Note on model no. selection Note on (E) *4: 5, 5K, 5, 5P and 5Q are coils which convert C power to DC with a diode. *5: The DC power with DIN terminal box is not available for () (port size) (1/4) or (3/). *6: Port size (1/4) or (3/) cannot be mounted on the manual override ((F) ). Note on () to (I) *7: The mounting plate (() ) can be mounted only on the port size (1/4) and (3/). *: Select one among D, E, F, and for (). *9: The surge suppressor is an accessory for the lead wire coil. When using the coil with terminal box, the surge suppressor is mounted in the terminal box. *: Surge suppressor is incorporated in coil with diode and (E) 4 VDC coil as standard. *11: Tropic care treatment (rustproof coating) is available as a measure against rust. Note that the tropic care treatment is not available when the manual override option () is selected. Note on (J) *1: 0 VC coil is compatible with 0 VC 50/60 z,1 VC 60 z, and 00 VC coil is compatible with 00 VC 50/60 z, 0 VC 60 z. Note that (E) 5, 5K, 5, 5P, and 5Q coils are used only with 0 VC 50/60 z or 00 VC 50/60 z. *13: Consult with CKD about other than above voltage. *14: The lead wire is available in the standard 300 mm length, and 500 mm, 00 mm, 000 mm and 3000 mm lengths. Contact CKD for more information. 49 Other.P. systems PD/FD/ PJ CVE/ CVSE CPE/ CPD Medical analysis Custom order eneral purpose valve

5 D11/D1 Series Dimensions: D11 Series (Page 300) Open frame lead wire type D11/* Lead wire length 300 mm M5 Depth 1 CKD D11* Rc1/4 D11* Rc3/ *1: The dimensions are the same for the or NPT thread port size. Open frame lead wire type D1115/0/5* Lead wire length 300 mm 46 F CKD D E C D1115* D110* D115* C D E F Rc1/ Rc3/4 Rc1 *1: The dimensions are the same for the or NPT thread port size. 5

6 D11/D1 Series Optional dimensions: D11 Series (Page 300) rommet lead wire type D11 to 5* C J Lead wire length 300 mm K * Refer to open frame lead wire type dimensions on a left page for common dimensions. DIN terminal box D11 to 5* E L M (41) N N/ US/ F/ F/ FV FW/ F D11 to *C D1115 to 5*C J K Dimensions shown in ( ) are for the 1/. L M N D11/* C (50) 0.5 D1115 to 5* C (53.5) D1115 to 5* DC (54) FL P/D Open frame type + square terminal box D11 to 5* 3 K 4K 5 4 P Q N 61 Open frame type + conduit D11 to 5* Q PK/ DK For dry air Explosion proof V/ VL S/ SV NP/NP/ NVP 45 CTC19 (1/) C/ D11 to * D1115 to 5* P N 6 1 P 7 91 Dimensions shown in ( ) are for the 1/. Q D11 to 53(56) D1115 to 5 57(60) MX/ Other.P. systems PD/FD/ PJ CVE/ CVSE Manual override (locking) D1115/0/5*** Manual IN 61 OUT Mounting plate D11/*** CPE/ CPD Medical analysis Custom order eneral purpose valve OUT port Mounting plate: E0159 Port size 15 (1/) to 5 (1) mounting plate is not used. 53

7 D11/D1 Series Dimensions: D1 Series (Page 300) Open frame lead wire type D115/0/5* Lead wire length 300 mm 46 E F CKD D C *1: The dimensions are the same for the or NPT thread port size. C D D115* D10* D15* E F Rc1/ Rc3/4 Rc1 54

8 D11/D1 Series Optional dimensions: D1 Series (Page 300) rommet lead wire type D115/0/5* C Lead wire length 300 mm 3 * Refer to open frame lead wire type dimensions on a left page for common dimensions. DIN terminal box D115/0/5* E J K 39(41) N/ US/ F/ F/ FV FW/ F FL Dimensions shown in ( ) are for the 1/. Voltage C DC J K (53.5) (60) P/D Open frame type + square terminal box D115/0/5* 3 K 4K 5 4 P Q Open frame type + conduit D115 to 5* PK/ DK For dry air Explosion proof (60) V/ VL S/ SV NP/NP/ NVP C/ CTC19 (1/) Dimensions shown in ( ) are for the 1/. MX/ Other.P. systems PD/FD/ PJ CVE/ CVSE CPE/ CPD Manual override (locking) D115/0/5*** Medical analysis Custom order Manual (13) eneral purpose valve 55

9 D11/D1 Series Internal structure and main parts materials D11 Series IN OUT (Figure shows close on operating) No Parts name Core assembly Shading coil * Coil Plunger Plunger spring Valve spring Stuffing *3 Sealant Diaphragm assembly ody O ring Orifice plate *3 Material SUS405 or equivalent, SUS316L, SUS403*1 Cu (g when stainless steel body) SUS405 or equivalent CC407 (SCS13) NR (FKM) SUS303,, NR (SUS303,, FKM) CC407 (SCS13) *4 NR (FKM) Copper (silver when stainless steel body) ronze casting (stainless steel casting) Nitrile rubber (fluoro rubber or tetrafluoroethylene resin), nitrile rubber (stainless steel, fluoro rubber) ronze casting (stainless steel casting) Nitrile rubber (fluoro rubber or tetrafluoroethylene resin) Options are shown in ( ). *1: When the body and sealant material combination symbol is other than O or, the material is SUS405 or equivalent, SUS316L, SUS430. *: When using the DC coil or a coil with a diode, no shedding coil is used. *3: For port size (1/4) or (3/), stuffing and orifice plate are not available. *4: For port size (1/4) or (3/), the body material is C3771 (brass) as a standard. 50

10 D11/D1 Series Internal structure and main parts materials D1 Series N/ 1 US/ F/ F/ 3 FV 4 FW/ F FL 7 1 P/D IN OUT PK/ DK For dry air No Parts name Plunger/core assembly Shading coil Coil NO valve assembly Spring Valve spring Stuffing Sealant Diaphragm assembly ody O ring Orifice plate (Figure shows open on operating) Material SUS405 or equivalent, SUS316L, Cu (g when stainless steel body) POM/NR (SUS303, PF, FKM or PTFE) CC407 (SCS13) NR (FKM) SUS303,, NR (SUS303,, FKM) CC407 (SCS13) NR (FKM) Copper (silver when stainless steel body) cetyl resin, nitrile rubber (stainless steel, perfluoroalkoxy resin, fluoro rubber or tetrafluoroethylene resin). ronze casting (stainless steel casting) Nitrile rubber (fluoro rubber or tetrafluoroethylene resin), nitrile rubber (stainless steel, fluoro rubber) ronze casting (stainless steel casting) Nitrile rubber (fluoro rubber or tetrafluoroethylene resin) Explosion proof V/ VL S/ SV NP/NP/ NVP C/ MX/ Other.P. systems PD/FD/ PJ CVE/ CVSE CPE/ CPD Medical analysis Custom order Options are shown in ( ). eneral purpose valve 51