V88 series Redundant valve manifold systems - Semi modular 2oo2 Availability

Transcription

1 oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless steel construction > > Utilizing industry proven technology > > SIL certified components and system Technical features Medium: Filtered, non-lubricated or dry compressed air, instrument air nitrogen and other non-flammable neutral dry fluids Operation: / Direct solenoid operated poppet valves Mounting position: Valves vertical only Operating pressure:... 0 bar ( psi) Flow: Standard valves l/min Port size: /4, /4 NPT Additional filter: Installation of an in-line filter is recommended (in the direction of flow from the actuator to RVM). Temperature range: Up to ( F), see option selector page Air supply must be dry enough to avoid ice formation at temperatures below (+5 F) Temperature range of solenoid valve: See option selector and corresponding valve data on page 5 Materials: lock: stainless steel.440 (6 L) Seals: NR Internal parts: stainless steel.440 (6 L) oo with exhaust guards and indicators oo I W I I V V I Indicators V Solenoid actuated valves W Shuttle valves ( OR function) without notice, the specifications given in this document. (0-580c) 04 Norgren mbh 6/5 en

2 oo Availability Option selector V88 0S000 0 Port sizes Substitute /4 (standard flow system) /4 NPT (standard flow system) Valve type Solenoid Voltage able Substitute Protection Entry Standard flow YXANPHS Exia 4 V d.c. M 0 x,5 0 Y0ANPHS Exd 4 V d.c. M 0 x,5 0 YZANPHS Exmbe 4 V d.c. M 0 x,5 0 Y0ANPHMS Exd 0 V a.c. M 0 x,5 04 YZANPHMS Exmbe 0 V a.c. M 0 x,5 05 YXANPHS Exia 4 V d.c. / NPT 06 Y0ANPHS Exd 4 V d.c. / NPT 07 YZANPHS Exmbe 4 V d.c. / NPT 08 Y0ANPHMS Exd 0 V a.c. / NPT 09 YZANPHMS Exmbe 0 V a.c. / NPT 0 Y0ANPHES Exd 5 V d.c. / NPT 0 Note; Please advise when ordering if SA certification is required ountry of manufacture Norgren internal use Indicators Visual valve status indicators in stainless steel - standard option; to be included in he scope of supply Visual valve status indicators in plastic - optional; to be included in the scope of supply No valve status indicator optional; replaced with plugs (stainless steel) Temperature Pressure range , bar bar ( psi) Substitute Silencers Temperature Substitute Exhaust guard (standard) Plastic silencers to replace exhaust guards Stainless steel silencers to replace exhaust guards Flow rates and valve combinations Flow direction (port to port) oo Standard flow systems x Y*ANPH*S» *) [l/min] 490» *) [l/min] 640 *) Flow characteristics conforms to ISO658 from port to port [6» 5 bar], see page *) Flow characteristics conforms to ISO658 from port to port [0» 0 bar], see page en without notice, the specifications given in this document. (0-580c) 04 Norgren mbh 6/5

3 oo Availability Standard and optional accessories Accessories - Standard (Included in the scope of supply) Exhaust guard *) Visual indicators (stainless steel) 8 Accessories - Optional Other silencers, plastic indicator and plugs Silencer (stainless steel) *) Silencer (plastic) *) 4 Visual indicators (plastic) Adaptor 9 0 Plug plus Sealing washer Page 7 Page ( /4, /4 NPT) ( /4) (/4 NPT) 064 ( /, / NPT) *) For indoors use *) For outdoors use Page 7 Page 7 Page 8 Page 8 5VS--000 (/8 NPT) ( /4, stainless steel) Adapter (/8 NPT to /4 NPT) *) (/4 NPT, stainless steel) 0048 ( /) M/S4 ( /) (stainless steel) Sealing washer *4) (/ NPT) /S4 (/ NPT) (plastic) *) For indoors use; *) For outdoors use; *) Must be ordered separately; *4) Must be ordered separately for thread only 6/5 without notice, the specifications given in this document. (0-580c) 04 Norgren mbh en

4 oo Availability oo (standard flow) Weight: 5 kg stainless steel sub-base only, valves and accessories see refer page M ø9 04?? ~ 9 0 Valve Y*ANPHS and Y*ANPHS series Outlet port /4 or /4 NPT Exhaust guard, ports / or / NPT 7 Inlet port /4 or /4 NPT 8 Visual indicator, stainless steel as standard 9 Mounting holes 0 Mounting threads en without notice, the specifications given in this document. (0-580c) 04 Norgren mbh 6/5

5 Y*ANPH*S standard flow valve > > Standard flow range (600 l/min) > > Direct acting / spring return to safe condition > > Suited for outdoor use under critical environment conditions (see solenoid list) > > These solenoid valves are applicable in Ex protection class ATEX (categories II D) and other international approvals Technical features Medium: Filtered, non-lubricated or dry compressed air, instrument air nitrogen and other non-flammable neutral dry fluids Operation: / Direct solenoid operated poppet valves Port size: Flanged Orifice: 5 mm Operating pressure: 0... bar ( psi) ( bar (45 psi) with SA approval) Fluid/Ambient temperature: See table below Air supply must be dry enough to avoid ice formation at temperatures below (+5 F) For outdoor installation please protect all connections against moisture ingress! Materials: ody: stainless steel.4404 (6 L) oil housing: stainless steel.4404 (6 L) Seals: NR Internal parts: stainless steel.4404 (6 L) Technical data Symbol Power consumption Rated current ertifications Temperature range Electrical Model 4 V d.c. 0 V a.c. 4 V d.c. 0 V a.c. Media Ambient connection (W) (VA) (ma) (ma) FM ATEX ( ) ( ) (conduit) 0,4 5 Ex II D, Ex ia II T6 ( ), T4 ( ) M 0 YXANPHS 5 lass, Divison, Ex II D, Ex d II T6 ( ), T4 ( ) M 0 Y0ANPHS roups, and D 5 Ex mbe II D, Ex mbe II T4 ( ) M 0 YZANPHS,5 0 lass, Divison, Ex II D, Ex d II T6 ( ), T4 ( ) M 0 Y0ANPHMS roups, and D,5 0 Ex mbe II D, Ex mbe II T4 ( ) M 0 YZANPHMS 0,4 5 Ex II D, Ex ia II T6 ( ), T4 ( ) / NPT YXANPHS 5 lass, Divison, Ex II D, Ex d II T6 ( ), T4 ( ) / NPT Y0ANPHS roups, and D 5 Ex mbe II D, Ex mbe II T4 ( ) / NPT YZANPHS,5 0 lass, Divison, Ex II D, Ex d II T6 ( ), T4 ( ) / NPT Y0ANPHMS roups, and D,5 0 Ex mbe II D, Ex mbe II T4 ( ) / NPT YZANPHMS Symbol Power consumption 5 V d.c. (W) Rated current 5 V d.c. (ma) ertifications FM ATEX Temperature range Media Ambient ( ) ( ) Electrical connection (conduit) Model 4 lass, Divison, roups, and D Ex II D, Ex d II T6 ( ), T4 ( ) / NPT Y0ANPHES 6/5 without notice, the specifications given in this document. (0-580c) 04 Norgren mbh en

6 Y*ANPH*S standard flow valve Valves: Y*ANPH*S 50 ø59 ø5, ,5 ø9, ø Valve: Y0ANPHES 50 ø ,5 ø5,5 ø9, Electrical connection M0 x,5 or / NPT Ports plugged /4: Hexagon head plug /4 NPT: Hexagon socket set plug en without notice, the specifications given in this document. (0-580c) 04 Norgren mbh 6/5

7 oo Availability ircuit diagrams Exhaust guard (plastic) - standard option Visual indicator (stainless steel) - standard option Suitable for Ø D Weight (g) Model / /, / NPT, Silencer (plastic) Ø D Ø D Weight (g) Model / , /4 NPT Silencer (stainless steel) ø D ø D ød ød Visual colour Red (unactuated) reen (actuated) Ø D Weight (g) Model / 67,5 M/S4 / NPT 67,5 /S4 Weight (g) Model / / NPT /5 without notice, the specifications given in this document. (0-580c) 04 Norgren mbh en

8 oo Availability Plug (stainless steel) Visual indicator (plastic) ø D ø D Visual colour Red (unactuated) reen (actuated) Weight (g) Model / /4 NPT Ø D Ø D Weight (g) Model /8 NPTF VS--000 Sealing washer (plastic) Adapter (stainless steel) E ø D ø D For plug ø D ø D E Weight (g) Model /4,5 7, Weight (g) Model /4 NPT /8 NPT, Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. en without notice, the specifications given in this document. (0-580c) 04 Norgren mbh 6/5