Switches and Indicators 01

Size: px

Start display at page:

Download "Switches and Indicators 01"

Elisabeth Webster
5 years ago
Views:

1 Switchs and Indicators 01 01

2 Switchs and Indicators Indx Sris 01 Dscription Pag 15 Product Assmbly Pag 16 Product Rang - pushbutton for standard mounting - accssoris / spar parts Tchnical Data Pag 17 Pag 19 Pag 25 Tchnical Drawing / Dimnsion / Layouts Pag 27 Circuit Drawing Pag 31 Typical Applications Pag 32 Marking Pag 33 14

3 Dscription 01 Gnral Nots Th Sris 01 illuminatd pushbuttons ar quippd with snapaction, low lvl switching lmnts. In addition to th standard contacts (gold-platd silvr), on rqust silvr contacts for switching lmnts 2.8 mm plug-in trminals ar availabl. Th front dimnsions of ths units ar 18 x 24 mm, 18 x 18 mm or 18 mm dia. In addition to a numbr of illuminatd pushbuttons, th customr can choos from a wid rang of othr units and accssoris having th sam front and mounting dimnsions. Mounting Mount from th front through th mounting hol. Th univrsal trminals of th low-lvl switching lmnts prmit thm to b mountd on printd circuit boards (PCB). Ths trminals ar also suitabl for dip soldring. For ths trminals w can also supply a plug-in bas which, whn soldrd on to th board, nabls th switch to b pluggd in. All rctangular switchs ar scurd against rotation. Lnss Th flat lnss, mad of polymthyl mthacrylat, ar obtainabl in various colours, as wll as translucnt or transparnt. Numbr structur 01-XXX.0XX 01-9XX.X Exampl: Spcimn ordr Kind of trminals Contact matrial Switch variant Lns -Illuminatd pushbutton, circular; momntary action, gold-platd silvr contact; soldrd trminals,1 switching lmnt Lns rd Indicator: - indicator, soldring trminals, 18 x 24 mm Rcommndd accssoris: - lns, blu, 18 x 24 mm LED, 1 chip, 12 VDC, whit Marking For ngraving, hot stamping and film insrts, s undr Marking on pag 33. Illumination Prfct illumination of th diffrnt colourd lnss is assurd by lamps T 5,5 (6-60 V). For supply voltags abov 60 V, it is ncssary to us a voltag rduction lmnt (xtrnal sris rsistor, capacitor, or transformr). Do not soldr th trminals dirctly, bcaus of th high surfac tmpratur. Multi-LED lamps T 5,5 (6, 12, 24, 48 V) ar availabl in th colours whit, rd, yllow and grn. Position Indication Whn a switch with maintaind action is actuatd, th lns rmains in th dprssd position mchanically. Th stat of th switch is apparnt at all tims from th position of th lns. All dimnsions in mm. W rsrv th right to modify tchnical data. 15

4 Product Assmbly 01 illuminatd-/pushbutton 1 lns 2 switch housing 3 fixing nut 16

5 Pushbuttons for Standard Mounting 01 indicator rcommndd accssoris: d lns 19 d incandscnt lamp 21; LED diod (1N 4007) connction mthod a 18 x 24 mm b 18 x 18 mm 18 mm dia. indicator - PT ,006 ST ,006 UT ,006 1 UT ,008 2 UT ,008 circuit drawing tchnical drawing mounting dimnsion componnts layout connction mthod: ST = soldring trminal; PT = plug-in trminal; UT = univrsal trminal; PCB plug-in bas pag 20 marking s pag 33 tchnical drawing as of pag 27, mounting dimnsions, componnts layouts as of pag 29, circuit drawing as of pag 31 17

6 Pushbuttons for Standard Mounting 01 illuminatd-/pushbutton rcommndd accssoris: d lns 19 d incandscnt lamp 21; LED 22 switching systm contacts diod (1N 4007) switching action connction mthod a 18 x 24 mm b 18 x 18 mm 18 mm dia. illuminatd-/pushbutton LL 1NC - main UT ,009 mom UT ,009 1NC + 1NO - main UT ,009 mom UT ,009 1NO - main UT ,009 mom UT ,009 2NC - main UT ,009 mom UT ,009 2NO - main UT ,009 mom UT ,009 SA 1NC + 1NO - main ST/ ,008 PT ST ,008 mom ST/ ,008 PT ST ,008 1 main UT ,010 mom UT ,010 2 main UT ,010 mom UT ,010 2NC + 2NO - main ST ,010 mom ST ,010 1 main UT ,012 mom UT ,012 2 main UT ,012 mom UT ,012 3NC + 3NO - main ST ,012 mom ST ,012 4NC + 4NO - main ST ,014 mom ST ,014 circuit drawing tchnical drawing mounting dimnsion componnts layout switching systm: LL = Low Lvl switching lmnt, SA = snap-action switching lmnt switching action: main = maintaind action, mom = momntary action connction mthod: ST = soldring trminal; PT = plug-in trminal; UT = univrsal trminal; PCB plug-in bas pag 20 contacts: NC = normally closd, NO = normally opn powr rating: Low Lvl switching lmnt: 42 V/100 ma, snap-action switching lmnt: 250 V/5 A marking s pag 33 tchnical drawing as of pag 27, mounting dimnsions, componnts layouts as of pag 29, circuit drawing as of pag 31 18

7 Accssoris 01 at front lns lns 12,8 x 18,8 mm, of plastic of plastic (not for film insrt and LED) of plastic (not for film insrt and illumination) of plastic (not rcommndd for film insrt) flat a 18 x 24 mm b 18 x 18 mm 18 mm dia. blu ,001 colourlss, clar ,001 grn ,001 orang ,001 rd ,001 yllow ,001 blu ,001 grn ,001 orang ,001 rd ,001 whit ,001 yllow ,001 flat opaqu/translucnt black ,001 gry ,001 flat shap lns/support colour flat transparnt/translucnt translucnt/translucnt transparnt/transparnt colourlss, clar ,001 grn ,001 rd ,001 yllow , protctiv covr protctiv covr hingd, transparnt, covr to prvnt accidntal opration a 18 x 24 mm b 18 x 18 mm tchnical drawing , ,002 tchnical drawing as of pag 27 sprayproof covr front protction IP 67 sprayproof covr two-part front shap matrial rctangular mad of silicon ,003 squar mad of PVC ,003 tchnical drawing mounting dimnsion tchnical drawing as of pag 27, mounting dimnsions as of pag 29 19

8 Accssoris 01 protctiv guard protctiv guard matt chromium-platd construction broad sids bnt upwards ,011 narrow nds bnt upwards ,011 tchnical drawing tchnical drawing as of pag 27 blind plug a b 18 x 24 mm 18 x 18 mm 18 mm dia. colour blind plug black ,001 mounting dimnsion mounting dimnsions as of pag 29 at back PCB plug-in bas for pin orintation PCB plug-in bas Low Lvl switching lmnt axial , mm dia. x 9.8 mm high 17.8 mm dia. x 9.8 mm high snap-action switching lmnt 2.8 mm axial , x 8.4 mm high Low Lvl switching lmnt right-angld ,004 With th xtndabl mounting th distanc btwn PCB plug-in bas and PCB can b varid up to 3mm. componnts layout componnts layouts as of pag 29 20

9 Accssoris 01 cabl sho connction mthod cabl sho plug-in trminal 2.8 x 0.5 mm ,001 univrsal trminal 2.0 x 0.5 mm ,001 connction mthod: PT = plug-in trminal, UT = univrsal trminal insulation sockt insulation sockt ,001 for connctor for connctor ,001 for snap-action switching lmnt 2.8 mm ,001 to covr th plug-in trminals 01 trminal covr trminal covr ,010 for illumination incandscnt lamp incandscnt lamp bas T 5.5 voltag/currnt 6 AC/DC/200 ma ( ) 0, AC/DC/100 ma ( ) 0, AC/DC/50 ma ( ) 0, AC/DC/25 ma ( ) 0, AC/DC/50 ma ( ) 0, AC/DC/40 ma ( ) 0, AC/DC/40 ma ( ) 0, AC/DC/35 ma ( ) 0, AC/DC/25 ma ( ) 0, AC/DC/20 ma ( ) 0,001 21

10 Accssoris 01 LED LED bas T 5.5 numbr of chips voltag/currnt colour 1 chip 12 VDC/14 ma whit , VDC/14 ma whit , VDC/14 ma whit ,001 6 chips 6 VDC/45 ma grn ( ) 0,001 rd ( ) 0,001 yllow ( ) 0, VDC/30 ma grn ( ) 0,001 rd ( ) 0,001 yllow ( ) 0, VDC/15 ma grn ( ) 0,001 rd ( ) 0,001 yllow ( ) 0, VDC/15 ma grn ( ) 0,001 rd ( ) 0,001 yllow ( ) 0, VDC/14 ma grn ( ) 0,001 rd ( ) 0,001 yllow ( ) 0,001 capacitor for lamp voltag rduction capacitor us with 60 VAC/20 ma, 50 Hz lamp voltag valu 230 VAC/0.27 µf ,004 Wir in accordanc with local lctrical safty rgulations. sris rsistor for lamp voltag rduction sris rsistor us with 60 VAC/20 ma lamp rating valu 110 V/2.7 kohm , V/3.3 kohm , V/4.7 kohm , V/10 kohm ,003 Wir in accordanc with local lctrical safty rgulations. trminal plat mpty for fitting with sris rsistors and capacitors no. of spacs trminal plat mpty 5 spacs , spacs , spacs , spacs ,045 22

11 Accssoris 01 trminal plat with capacitor trminal plat with capacitor us with 60 VAC/20 ma lamp rating valu no. of componnts 0,27 µf/230 VAC/60 VAC 5 spacs , spacs , spacs , spacs ,180 Wir in accordanc with local lctrical safty rgulations. 01 trminal plat with sris rsistor trminal plat with sris rsistor us with 60 VAC/20 ma lamp rating Wir in accordanc with local lctrical safty rgulations. assmbling lns rmovr valu no. of componnts 2.7 kohm/110/60 V 5 spacs , spacs , spacs , spacs , kohm/125/60 V 5 spacs , spacs , spacs , spacs , kohm/ /60 V 5 spacs , spacs , spacs , spacs ,155 lns rmovr ,011 lamp rmovr lamp rmovr ,002 LED rmovr LED rmovr ,024 23

12 Accssoris 01 drssing tool drssing tool for aligning buttons ,030 mounting tool mounting tool for tightning (or loosning) fixing nuts ,020 24

13 Tchnical Data 01 actuator with snap-action switching lmnt switching systm Slf-claning, doubl-brak, snap action switching systm. (with contact gap 2 x 0.5 mm). 1 normally closd or 1 normally opn contact pr lmnt. snap-action switching lmnts with soldring trminals at th sids: up to 4 switching lmnt can b on a pushbutton (max. 4 normally closd and 4 normally opn contacts). snap-action switching lmnt with axial plug-in trminals 2,8 mm not stachabl, only 1 switching lmnt can b on a pushbutton. matrial actuator cas polyphnyln PPO, slf-xtinguishing matrial of contacts gold-platd silvr switching lmnt axial plug-in-/soldring trminal 2.8 mm: diallyl phthalat DAP, polyamid 66, polysulfon, hat-rsistant and slf-xtinguishing soldring trminal: PA 6.6 Ultramid mchanical charactristics actuating forc N, dpnding on th numbr of switching lmnts actuating travl 3mm ambint air tmpratur -25 C to +55 C for indicators and illuminatd pushbuttons mountd as a block, mak sur th hat can scap frly (as pr DIN IEC 68-) connction mthod snap-action switching lmnt with tinnd soldring trminals at th sids: max. wir diamtr: 2 wirs of 1.2 mm max. wir cross-sction of strandd cabl: 1x 1 mm 2. snap-action switching lmnt with axial plug-in trminals, which can also b usd as soldring trminals: plug-in trminal: 2.8 x 0.5 mm soldring trminal: max. wir diamtr: 2 wirs of 1 mm 2 max. wir cross-sction of strandd cabl: 2 x 0.75 mm 2 or 1 x 1.0 mm 2 dgr of protction front as pr IEC 529: IP 40 IP 67 with spray covr mchanical lif momntary action 2 million cycls of opration maintaind action 1 million cycls of opration rbound tim <= 5ms rsistanc to climat standard condition as pr IEC and 2-30 changing condition as pr IEC and 2-33 rsistanc to shock (singl impacts, smi-sinusoidal) 15 g for 11 ms as pr IEC , IEC rsistanc to vibration (sinusoidal) 10 g at Hz, amplitud 1.5 mm as pr IEC , IEC storag tmpratur -40 C to + 85 C (as pr DIN IEC 68-) lctrical charactristics continuous thrmal currnt lth 2 5A Th maximum currnt in continuous opration and at ambint tmpratur not xcding th quotd maximum valus. lctric strngth 2500 VAC, 50 Hz, 1 min. btwn all trminals and arth, as pr IC protction class II ratd currnt 5A ratd voltag 250 VAC/VDC switch rating 250 VAC/5 A (cos ϕ 1) 250 VAC/3 A (cos ϕ 0.3) switch rating AC, cos ϕ 0,7: voltag 125 V 250 V currnt 3 A 2 A switch rating DC (inductiv), L:R = 30 ms: voltag 24 V 60 V 110 V 220 V currnt 2 A 0,7 A 0,2 A 0,1 A volum rsistanc starting valu (initial) <= 50 mω ruls IEC 1058 EN approvals - SEV 250 VAC/5A - CSA 300 VAC -UL actuator with Low Lvl switching lmnt switching systm This low lvl switching lmnt was dsignd for switching low powrs in lctronic circuits. Th mchanism assurs rliabl switching of loads ranging from a fw µa/µvupto100ma/42vac/ VDC. Singl-brak momntary contact, as normally opn or normally closd with 4 indpndnt points of contact. 2 momntary contacts pr switching lmnt; combination of normally opn and normally closd is possibl. Spcial faturs ar th long lif, xtrmly short rbound tim and stabl contact rsistanc. matrial actuator cas polyphnyln PPO, slf-xtinguishing matrial of contacts gold-platd 0 25

14 Tchnical Data 01 switching lmnt polysulfon, hat-rsistant and slf-xtinguishing mchanical charactristics actuating forc N actuating travl 3mm ambint air tmpratur -25 C to +55 C for indicators and illuminatd pushbuttons mountd as a block, mak sur th hat can scap frly (as pr DIN IEC 68-) connction mthod Th univrsal trminals prmit ths units to b mountd on printd circuit boards (PCB). Ths trminals can also b usd as soldring or plug-in trminals. For ths trminals w can also supply a plug-in bas which, whn soldrd on to th board, nabls th switch to b pluggd in. soldring trminal: max. wir diamtr: 2 wirs à 0.8 mm max. wir cross-sction of strandd cabl: 1x 0.75 mm 2 plug-in trminal: 2.0 x 0.5 mm dgr of protction front as pr IEC 529: IP 40 IP 67 with spray covr mchanical lif momntary action 5 mio. cycls of opration maintaind action 1 mio. cycls of opration rbound tim Typ. < 100 µs rsistanc to climat standard condition as pr IEC and 2-30 changing condition as pr IEC and 2-33 rsistanc to shock (singl impacts, smi-sinusoidal) 15 g for 11 ms as pr IEC , IEC storag tmpratur -40 C to + 85 C (as pr DIN IEC 68-) lctrical charactristics lctric strngth 2500 VAC, 50 Hz, 1 min. btwn all trminals and arth, as pr IC protction class II switch rating 10 µa/100 µv to 100 ma at 42 VAC/VDC volum rsistanc starting valu (initial) <= 50 mω ruls EN

15 01 Tchnical Drawing, Dimnsion, Layouts 01 tchnical drawing 1 indicator pag 17 2 indicator pag 17 3 indicator, illuminatd-/pushbutton pag 17, 18 4 illuminatd-/pushbutton pag 18 27

16 Tchnical Drawing, Dimnsion, Layouts 01 5 illuminatd-/pushbutton pag 18 6 protctiv covr pag 19 7 protctiv covr pag 19 8 sprayproof covr pag 19 9 protctiv guard pag protctiv guard pag 20 28

17 01 Tchnical Drawing, Dimnsion, Layouts 01 mounting dimnsion 1 indicator, illuminatd-/pushbutton, blind plug pag 17, 18, 20 2 sprayproof covr pag 19 componnts layouts 1 indicator, illuminatd-/pushbutton pag 17, 18 2 PCB plug-in bas pag 20 3 PCB plug-in bas pag 20 29

18 Tchnical Drawing, Dimnsion, Layouts 01 4 PCB plug-in bas pag 20 30

19 Circuit Drawing 01 circuit drawing circuit drawing

20 Typical Applications 01 With indicators and illuminatd pushbuttons quippd with diods, th usr is abl to prform a lamp chck or wir an alarm circuit simply with a considrabl saving of spac. 32

21 Marking Engraving 2. Hot stamping 3. Film insrts Typfacs In addition to th most commomly usd world languags (s DIN 1451) with clos spacing, th following typfacs ar availabl: Scandinavian, Slavian, Grk, Russian. Colourd filling of ngraving Spcify whthr ngraving should b on th diffusr, or on th lns. Spcify th infill colour, charactr hight and th txt or symbol orintation. Symbols For larg batchs it is worth whil to hav th lttring producd by hot stamping. Typfacs For lttrs and figurs, typfacs with 2,5 mm, 3 mm and 4 mm ar availabl.. Symbols A list of th symbols availabl can b supplid on rqust. Instad of using ngraving, th lnss can b fittd with transparnt film insrts. For this purpos, though, it is advisabl to us transparnt lnss.whn a smokd lns is usd, th lttring dos not bcom visibl until th lns lights. To insrt th film, th ft of th lns support hav to b pushd togthr far nough to nabl th lns to b liftd off asily. Film dimnsions max. 10,2 x 16,2 mm 10,2 x 10,2 mm 12,8 mm 01 A list of th symbols availabl can b supplid on rqust. Film thicknss 0,2 mm Important! Bfor ngraving, chck th position of th illuminatd pushbuttons or indicator. Horizontal mounting Vrtical mounting Hight of lttrs Thicknss of lttrs Numbr of lins Numbr of lttrs pr lin Numbr of lttrs pr lin Numbr of lins Numbr of lttrs pr lin Numbr of lttrs pr lin h s (caps) (small) (caps) (small) (caps) (small) (caps) (small) 2,5 0, , , , , , Numbr of lins Numbr of lttrs pr lin Numbr of lttrs pr lin Numbr of lins Numbr of lttrs pr lin Numbr of lttrs pr lin 33

Switches and Indicators 31

Switches and Indicators 31 Switchs and Indicators 31 31 Switchs and Indicators Indx Sris 31 Dscription Pag 37 Product Assmbly Pag 38 Product Rang - pushbuttons for standard mounting - accssoris / spar parts Tchnical Data Pag 39