GBC Pro-Tech Parts Manual

Transcription

1 G Pro-Tech Parts Manual pril 999 G Pro-Tech Do not duplicate withoutwritten permission. G Pro - Tech nderson Road DeForest, WI Revision : Ph: ( 608 ) 6-88 Part number : Fx: ( 608 ) 6-86

2 Read Me File... The information in this publication is provided for reference and is believed to be accurate and complete. G Pro - Tech is not liable for errors in this publiction or for incidental or consequential damage in connection with the furnishing or use of the information in this publication, including, but not limited to, any implied warranty of fitness or merchantability for any particular use. G Pro - Tech reserves the right to make changes to this publication and to the products described in it without notice. ll specifications and information concerning products are subject to change without notice. Reference in this publication to information or products protected by copyright or patent does not convey any license under the rights of G Pro - Tech or others. G Pro - Tech assumes no liabilty arising from infringements of patents or any other rights of third parties. This manual is copyrighted 999 by G Pro - Tech. ll rights reserved. The information contained in this manual is proprietary and may not be reproduced, stored, transmitted, or transferred, in whole or in part, in any form without the prior and express written permission of G Pro - Tech. In the electronic version of this publication, the ( ) red boxes indicate a hyper link with its exploded view drawing. The hand will turn to a pointer finger identifying the hyperlinked area. In the table of contents section, you will not see the box. lick on the page number to goto the specific page. To return from a linked page, right click on the mouse and select ( Go ack ). The symbol, ( NO ), means you can not order this part number. The part number is used for the sole purpose of a drawing reference number only. To help you obtain your part needed as quickly as possible, please order the single item required. ll part numbers that begin with a 00 -??? are assembly numbers and take longer to ship since they must be assembled prior to shipping. This can cuase a delay of two or more days. If you find an error within this publication or would like to make a suggestion, please utilize the correspondence sheet following this read me file and fax it to the number provided. Your comments and help will ensure up to date information. Thank you. cknoledgements ; Sean Flood - Technical Service Department, Technical writer rian terry - Engineering Department, utoad Specialist Nathan Glowaty - Production Department, Final ssembly

3 Fax orrespondence Fax number : ( 608 ) 6-86 Date : To : Sean G Pro - Tech nderson Road DeForest, WI From : ompany : ddress : Phone number : ( ) Fax number : ( ) Re : G Pro - Tech Parts Manual ( Part number ) What section? What Page #? What needs correcting? dditional comments:

4 Linked to Table of ontents Falcon 6 ( ) Falcon 60 ( ) Falcon 60 + ( ) Dye Sub 60 ( ) Orca I SE ( ) Orca I SP ( ) Orca II ( ) Orca III SE ( ) Orca IV ( ) Orca 80 ( ) Universal Parts

5 G Pro - Tech Parts Manual Table of ontents Section : Falcon 6 ( ) - : over page with available options - : Top View - : Front and rear views - : ontrol side view - : Front control panel ( NO ) Rear switch - 6: Electrical panel assembly - 7: Drive side view - 8: Idler sprocket assembly - 9: 00-0 Main roll assembly ( NO ) - 0: 00-0 Pull roll assembly ( NO ) - : 00-0 Lift mechanism assembly ( NO ) - : 00-0 Drive assembly ( NO ) - : Idler assembly, web tension - : ridge assembly ( NO ) - : 00-0 abinet assembly ( NO ) - 6: 00-0 Stand assembly - 7: 00-0 Output slitter assembly - 8: 00-0 Rewind assembly ( NO ) - 9: Vacuum table assembly - 0: 00 - rm assembly, pull roll - : 00-7 Power cable assembly, vacuum table - : 00 - Knob assembly, unwind brake - : 00 - Temperature controller assembly, Fahrenheit - : 00 - Slitter assembly, output - : 00-7 ccessory pack assembly - 6: 00-7 Plug assembly, power cord, vacuum table - 7: 00-7 Infeed table assembly - 8: Finished product rewind assembly - 9: Torque limiter assembly - 0: 00 - Wire duct set assembly - : 00-7 rake assembly, rewind - : Safety label kit assembly - : 00-0 Idler assembly, table - : 00 - Table idler assembly - : 00 - Paper unwind assembly - 6: 00 - Knob assembly, clamp, unwind arm - 7: 00 - Upper unwind assembly ( NO ) G Pro - Tech pril 999 Page I

6 G Pro - Tech Parts Manual Table of ontents - 8: 00-6 Lower unwind assembly ( NO ) - 9: 00 - Lift assembly, control side ( NO ) - 0: 00 - Rewind drive assembly ( NO ) - : 00-7 Lift assembly, drive side ( NO ) - : 00-6 Large castor assembly, 9 nip height Section : Falcon 60 ( ) - : over page with available options - : Side cabinets and covers - : Front and rear views - : ontrol side view - : 00 - Electrical panel assembly - 6: 00-9 Front control panel ( NO ) Rear switch - 7: Drive side view - 8: ridge and inside parts view - 9: 00-8 Upper unwind brake assembly - 0: 00-6 Idler assembly, output tension, chrome - : 00 - M.O.V. assembly - : 00-6 Sensor assembly, force guage - : 00-7 P assembly, force guage - : 00-9 Idler assembly, web tension, powder coated - : Lower unwind brake assembly - 6: 00-8 djustable chain tensioner assembly - 7: 00 - Rewind drive assembly ( NO ) - 8: 00 - Force guage sensor assembly - 9: 00-7 Magnet assembly, force guage - 0: 00-9 Rewind brake assembly - : 00-7 P assembly, electrical panel - : 00 - ccessory pack assembly - : 00-6 TS assembly - : 00-8 Wire duct set assembly - : 00-0 ore chuck assembly - 6: 00-7 Self tensioner assembly - 7: Heater tensioning kit assembly - 8: 06-0 Main roll lift assembly ( NO ) Section : Falcon 60 + ( ) - : over page with available options G Pro - Tech pril 999 Page II

7 G Pro - Tech Parts Manual Table of ontents - : Side cabinets and covers - : Front and rear views - : ontrol side view - : 00 - Electrical panel assembly - 6: 00 - Front control panel ( NO ) Rear switch - 7: Drive side view - 8: ridge and inside parts view - 9: 00-8 Upper unwind brake assembly - 0: 00 - M.O.V. assembly - : 00-7 P assembly, force guage - : 00-9 Idler assembly, web tension, powder coated - : Lower unwind brake assembly - : 00-7 Magnet assembly, force guage - : 00-9 Rewind brake assembly - 6: 00-8 Wire duct set assembly - 7: 00-0 Sensor assembly, force guage - 8: 00-0 Force guage sensor assembly - 9: Terminal strip assembly - 0: 00-0 ore chuck assembly - : 00 - TS ssembly - : 00 - ccessory pack assembly - : 00 - Pull roll lift assembly, drive side ( NO ) - : 00 - Pull roll lift assembly, control side ( NO ) - : 00-6 ridge assembly, fans ( NO ) - 6: Heater tensioning kit assembly - 7: Rewind drive assembly ( NO ) - 8: Main roll lift assembly ( NO ) Section : Dye Sub 60 ( ) - : over page with available options - : Side cabinets and covers - : Front and rear views - : ontrol side view - : 00-8 Electrical panel assembly - 6: 00 - Front control panel ( NO ) Rear switch - 7: Drive side view - 8: ridge and inside parts view - 9: 00-7 Power cord assembly, main power G Pro - Tech pril 999 Page III

8 G Pro - Tech Parts Manual Table of ontents - 0: 00 - M.O.V. assembly - : 00-7 P assembly, force guage - : 00-9 Idler assembly, pivot idlers - : 00-9 Idler assembly, web tension, powder coated - : Lower unwind brake assembly - : Pivot idler assembly, web lift - 6: 00-8 djustable chain tensioner assembly - 7: 00 - Rewind drive assembly ( NO ) - 8: 00-7 Magnet assembly, force guage - 9: 00-9 Rewind brake assembly - 0: 00-7 P assembly, electrical panel - : 00 - ccessory pack assembly - : 00-7 ore chuck assembly - : 00-6 Terminal strip assembly - : 00-0 Sensor assembly, force guage - : 00-0 Force guage sensor assembly - 6: 00-0 Thermocouple spring kit assembly - 7: 00-0 Positive rewind drive assembly - 8: 00-0 Heater tensioning kit with heater assembly - 9: 0-0 Main roll lift assembly ( NO ) Section : Orca I SE ( ) - : over page with available options - : Side cabinets and covers - : Front and rear views - : ontrol side view - components - : ontrol side view - hardware - 6: Electrical panel - 7: 00-0 Front control panel 00-0 Rear control panel - 8: Drive side view - components - 9: Drive side view - hardware - 0: ridge and inside parts view - : 00 - ore chuck assembly - : 00-8 Unwind brake assembly - : 00-8 Rewind brake assembly - : 00-8 Self tensioning idler assembly - : 00-8 Rewind drive assembly - 6: Main roll bearing block assembly G Pro - Tech pril 999 Page IV

9 G Pro - Tech Parts Manual Table of ontents - 7: 00-9 Output chill idler assembly - 8: 00-9 Main roll ssembly ( NO ) - 9: 00-9 Main roll cylinder assembly, drive side - 0: Pull roll assembly ( NO ) - : Pull roll cylinder assembly, drive side - : 00-0 ir solenoid assembly, main roll - : Main roll cylinder assembly, control side - : Pull roll cylinder assembly, control side - : 00-0 ir filter assembly - 6: 00-7 Handle assembly, cam, table idler - 7: 00-8 Idler assembly, table idler - 8: 00 - Din rail set assembly - 9: 00-9 Main roll shim disk assembly, drive side - 0: 00-0 Main roll shim disk assembly, control side - : 00 - Pull roll shim disk assembly, drive side - : 00 - Pull roll shim disk assembly, control side - : 00-7 ccessory pack assembly - : Sprocket assembly, drive - : djustable chain tensioner assmbly - 6: 00-9 Table idler assembly - 7: 00-9 Frame assembly, infeed table - 8: Idler assembly, slitter - 9: Infeed table assembly - 0: Slitter idler assembly - : Infeed slitter assembly - : 00 - Knob assembly, infeed slitter - : 00-9 ir solenoid assembly, pull roll - : 00-8 T.V.S. assembly - : 00 - Outfeed table assembly - 6: Heater tensioning kit assembly - 7: 80-0 Wire duct set assembly Section 6 : Orca I Scotch Print ( ) 6 - : over page with available options 6 - : Side cabinets and covers 6 - : Front and rear views 6 - : ontrol side view - components 6 - : ontrol side view - hardware G Pro - Tech pril 999 Page V

10 G Pro - Tech Parts Manual Table of ontents 6-6: Electrical panel assembly 6-7: Front control panel 00-0 Rear control panel ( NO ) 6-8: Drive side view - components 6-9: Drive side view - hardware 6-0: ridge and inside parts view 6 - : 00 - Outfeed slitter assembly 6 - : 00-8 Unwind brake assembly 6 - : 00-8 Rewind brake assembly 6 - : 00-8 Self tensioning idler assembly 6 - : 00-8 Rewind drive assembly 6-6: Main roll bearing block assembly 6-7: 00-9 Main roll cylinder assembly, drive side 6-8: Pull roll assembly ( NO ) 6-9: Pull roll cylinder assembly, drive side 6-0: 00-0 ir solenoid assembly, main roll 6 - : Main roll cylinder assembly, control side 6 - : Pull roll cylinder assembly, control side 6 - : 00-0 ir filter assembly 6 - : 00-7 Handle assembly, cam, table idler 6 - : 00-8 Idler assembly, table idler 6-6: 00 - Din rail set assembly 6-7: 00-9 Main roll shim disk assembly, drive side 6-8: 00-0 Main roll shim disk assembly, control side 6-9: 00 - Pull roll shim disk assembly, drive side 6-0: 00 - Pull roll shim disk assembly, control side 6 - : Sprocket assembly, drive 6 - : djustable chain tensioner assmbly 6 - : 00-9 Table idler assembly 6 - : 00-9 Frame assembly, infeed table 6 - : Idler assembly, slitter 6-6: Infeed table assembly 6-7: Slitter idler assembly 6-8: Infeed slitter assembly 6-9: 00 - Knob assembly, infeed slitter 6-0: 00-9 ir solenoid assembly, pull roll 6 - : 00-8 T.V.S. assembly 6 - : 00 - Outfeed table assembly 6 - : 00-9 Outfeed idler assembly G Pro - Tech pril 999 Page VI

11 G Pro - Tech Parts Manual Table of ontents 6 - : 00-7 ir booster assembly 6 - : 00-8 Lever booster assembly 6-6: 00-8 Saddle assembly, unwind, paper 6-7: Heater tensioning kit assembly 6-8: 80-0 Wire duct set assembly Section 7: Orca II ( ) 7 - : over page with available options 7 - : Side cabinets 7 - : Front view 7 - : Top view 7 - : ontrol side view 7-6: Electrical panel assembly 7-7: Front control panel Rear control panel 7-8: Drive side view 7-9: Unwind assembly ( NO ) 7-0: Rewind assembly ( NO ) 7 - : Idler assembly, fixed 7 - : Idler assembly, table 7 - : Idler assembly, web tensioning, upper and lower 7 - : Idler sprocket assembly 7 - : Main cylinder assembly, drive side 7-6: Main cylinder assembly, control side 7-7: 00-0 Main roll assembly, upper ( NO ) 7-8: 00-0 Main roll assembly, lower ( NO ) 7-9: 00-0 Pull roll assembly, upper ( NO ) 7-0: Pull roll assembly, lower ( NO ) 7 - : Pull roll cylinder assembly, drive side 7 - : Pull roll cylinder assembly, control side 7 - : lower assembly, control side ( NO ) 7 - : lower assembly, drive side ( NO ) 7 - : Encoder assembly, speed control 7-6: Regulator assembly, main air supply 7-7: ir solenoid valve assembly 7-8: Safety cable assembly ( NO ) 7-9: Infrared sensor assembly ( NO ) 7-0: P assembly, infrared sensors ( NO ) 7 - : Table assembly, small G Pro - Tech pril 999 Page VII

12 G Pro - Tech Parts Manual Table of ontents 7 - : Table assembly, large 7 - : Front table bracket, drive side 7 - : Front table bracket, control side 7 - : Rear table bracket, drive side 7-6: Rear table bracket, control side 7-7: Photo eye assembly ( NO ) 7-8: Frame assembly, machine ( NO ) 7-9: Self tensoner assembly 7-0: Motor assembly ( NO ) 7 - : Guage assembly, web tensioner 7 - : Unwind core assembly 7 - : 00-0 Guard assembly, blower hose 7 - : 00-0 djustable chain tensioner assembly 7 - : 00-0 Filter / luber assembly 7-6: Switch assembly, web tensioning 7-7: 00-0 Output slitter assembly 7-8: 00 - Unwind core end / brake assembly 7-9: 00 - Infeed slitter assembly 7-0: 00 - Idler assembly, slitter 7 - : 00-6 Idler assembly, removable Section 8 : Orca III SE ( ) 8 - : over page with available options 8 - : Side cabinets 8 - : Front view 8 - : Rear view 8 - : ontrol side view - components 8-6: ontrol side view - hardware 8-7: 00 - Electrical assembly 8-8: 00-7 Front control panel 00 - Rear control panel 8-9: Drive side view 8-0: Idler assembly, fixed 8 - : Idler assembly, table 8 - : Pull roll cylinder assembly, drive side 8 - : Pull roll cylinder assembly, control side 8 - : Table assembly, small 8 - : Table assembly, large 8-6: Front table bracket assembly, drive side G Pro - Tech pril 999 Page VIII

13 G Pro - Tech Parts Manual Table of ontents 8-7: Front table bracket assembly, control side 8-8: Rear table bracket assembly, drive side 8-9: Rear table bracket assembly, control side 8-0: Self tensioner assembly 8 - : Unwind core end assembly 8 - : 00-0 djustable chain tensioner assembly, primary chain 8 - : Outfeed slitter assembly, hooked blade 8 - : 00 - Unwind core end / brake assembly 8 - : 00 - infeed / oufeed slitter assembly 8-6: 00 - Idler assembly, slitter 8-7: Serial plate assembly, generic 8-8: 00-6 Shield assembly 8-9: 00-6 Shield stopper assembly, drive side 8-0: Shield stopper assembly, control side 8 - : ccessory pack assembly 8 - : 00-8 Rewind brake assembly ( NO ) 8 - : Switch assembly, cooling fans 8 - : 00 - Noise filter assembly 8 - : 00-6 Idler assembly, removable 8-6: 00 - Wire duct set assembly 8-7: 00 - Din rail set assembly 8-8: 00 - djustable chain tensioner assembly, secondary chain 8-9: 00-9 Safety label set assembly 8-0: 00-8 Over-temp protection assembly ( NO ) 8 - : 00-0 Shaft assembly, pull roll cylinder, control side 8 - : 00-6 Rewind drive assembly ( NO ) 8 - : 00 - M.O.V. assembly 8 - : Heater tensioning kit assembly Section 9 : Orca IV Industrial ( ) 9 - : over page with available options 9 - : Side cabinets and covers 9 - : Front and rear views 9 - : ontrol side view - components 9 - : ontrol side view - hardwrae 9-6: 00-8 Electrical panel 9-7: 00-6 Front control panel 00-8 Rear control panel 9-8: 00-0 Front brake panel 00 - Rear brake panel G Pro - Tech pril 999 Page I

14 G Pro - Tech Parts Manual Table of ontents 9-9: Drive side view - components 9-0: Drive side view - hardware 9 - : Inside parts view 9 - : Main roll lift assembly ( NO ) 9 - : ir filter assembly ( NO ) 9 - : ooling idler assembly ( NO ) 9 - : Motor sprocket assembly ( NO ) 9-6: Idler sprocket assembly ( NO ) 9-7: Idler assembly, upper drive sprocket ( NO ) 9-8: hain tension idler assembly ( NO ) 9-9: lutch rewind assembly, 0 T ( NO ) 9-0: Self tensioner assembly, / ( NO ) 9 - : Self tensioner assembly, -/6 ( NO ) 9 - : Straight fitting airline strip assembly ( NO ) 9 - : Locking pin assembly ( NO ) 9 - : Elbow fitting airline strip assembly ( NO ) 9 - : Pull roll lift assembly ( NO ) 9-6: lutch rewind assembly, 8 T ( NO ) 9-7: Idler assembly, fixed 9-8: 00 - Infeed slitter assembly 9-9: 00 - Idler assembly, slitter 9-0: 00-6 Idler assembly, removable 9 - : 00-0 Standoff assembly, removable idler 9 - : 00 - M.O.V. assembly 9 - : 00-0 Valve control assembly, main roll and pull roll 9 - : 00-9 Motor controller assembly 9 - : 00-6 Terminal block, input to PL 9-6: 00-6 Terminal block, output to PL 9-7: Terminal block, sensors 9-8: Terminal block, main power 9-9: 00-7 Terminal block, fans, control side 9-0: 00-7 Terminal block, fans, drive side 9 - : ccessory pack assembly 9 - : 00-0 Encoder assembly Section 0 : Orca 80 ( ) WILL E DDED T LTER DTE Universal items parts list ( wire, connectors, etc. ) G Pro - Tech pril 999 Page

15 G Pro - Tech Parts Manual Falcon 6 SE Illustrated Parts Diagrams ( ) vailable Options ; ( Vacuum Table ) 00 - ( Paper Unwind ) ( Product Rewind ) 00-0 ( Outfeed Slitters ) 00-7 ( Outfeed Table ) 00-6 ( 9 Nip Height astors ) G Pro - Tech pril 999 Page -

16 G Pro - Tech pril 999 Page over, abinet, Drive ssembly, bridge 0-0 Decals, E-Stop ssembly, idler 00 - ssembly, rewind drive 00-0 ssembly, abinet, Drive abinet, Drive side Main rolls Table, Infeed Pull roll, Upper 67-0 Pressure Plate Pull roll, Lower 0-0 Thermo couples 00-0 ssembly, lift, main 00-0 ssembly, Main Rolls 00-0 ssembly, Pull Rolls 00-0 ssembly, abinet, ontrol 0-00 abinet, ontrol side 0-00 over, abinet, ontrol - Push button, E-Stop 6-00 Hand wheel G Pro - Tech Parts Manual F 6 : Top View

17 G Pro - Tech Parts Manual F 6 : Front / Rear views Front View ore stopper Rewind tube 00-0 ssembly, rewind 00-7 ssembly, brake, rewind 00 - ssembly, upper unwind Shaft, rewind ssembly, front control Motor 00-6 ssembly, lower unwind 00-0 ssembly, stand astor wheel 8-0 Fan, muffin, " Main rolls Rear View 00 - ssembly, knob, brake Pull roll, upper Idlers, webbing - Push button, E-Stop 00 - ssembly, knob, unwind - Push button, E-Stop 0-00 abinet, control Side - 00 Knob, switch, on/off - 0 Switch, power, on/off abinet, drive side 7-80 Strain relief, /" 7-90 Strain relief, /" Motor - 6 Foot switch * Safety label kit 00-7 ssembly, power cord Pull roll, lower astor, wheel 00-7 ssembly, ccessory pack G Pro - Tech pril 999 Page -

18 G Pro - Tech Parts Manual F 6 : ontrol Side 00 - ssembly, lift, control Plate, bearing, main roll ssembly, electrical panel 00 - ssembly, pull roll arm 0-00 racket, heater, upper 0-09 racket, photo-eye 0-00 Photo-eye - 0 Switch, power, on/off - 00 Knob, switch, on/off 00-7 ssembly, plug, vacuum table 7-90 Strain relief, /" Heaters 00 - Panduit set racket, heater, lower G Pro - Tech pril 999 Page -

19 G Pro - Tech Parts Manual F 6 : Front & Rear Panels ( NO ) 0-6 Rotary potentiometer Front ontrol Panel 6-0 Knob, speed MOTOR FWD 9 UTO - 0 Switch, fwd/rev 6-70 Switch, auto/stop REV 0 8 SPEED STOP FNS POWER 0-00 Overlay, front panel - 80 Switch, pole, on/off 0 HETERS Indicator, green, 0vac - 60 Switch, pos, on/off 0 T O P OUT D PROTEH F 00 HI LO 00 - ssembly, temp control o F - 60 Switch, pos, on/off 0 O T T O M OUT D PROTEH F 00 HI LO 00 - ssembly, temp control o F PRO-TEH Engineering Madison,WI Rear ontrol Panel - 70 Switch, fwd/rev MOTOR UTO 0-06 Overlay, rear panel STOP G Pro - Tech pril 999 Page -

20 M N - G Pro - Tech pril 999 Page - 6 D PROPRIETR G PRO-TEH LIMS PROPRIETRY Y RIGHTS TO MTERIL DISLOSED ON THIS THE DRWING. IT IS ISSUED IN FOR ENGINEERING INFORMTION ONFIDENE ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO- TEH L L GR D 8 P P P I F+ F- L L + O U I T N P P U U T T O U I T N P P U U T T REQ'D PNL,ELE NTRL,MTR /KL-0DS 0-60 RD,RR /KI REST,/8 /KI T,END /SS T,0,GRY /VU T,0,LUE /VU SE,RLY,PIN /PY-E RLY, PIN /MYN/ DIN RIL, " RLY,SST,0,0V / HS, SHS, SHS,0-. - WSH,LOK,0-6 R,JMP /SS NUMERS 7 6 VR,R,JMP,V/V FUSE,. / - 9 FUSE - 0,PWR /S7K 86-0 DUT WITH OVER, 8" 80- T,0,GRN /VUPE GROMMET,RUER, S R 0-- S R -- S REVISIO SHEET OF UNLESS OTHERWISE TOLERN SPEIFIED E DIM. SHOW TOL S FINIS N. TO H / P / E 6 P..00. P.00. P NGLE.00 SP. P D.00 DESRIPTION TITLE : - DTE : RELES ENO. DRWN SLE Y: : RS : PRT NO. R PRO-TEH SSY, PNEL, ELE nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) SIZE : Dwg : ITEM D G Pro - Tech Parts Manual F 6 : Electrical Panel

21 G Pro - Tech Parts Manual F 6 : Drive side 0 - Sprocket, idler 00-7 ssembly, lift, drive - 60 Sprocket, rewind - 60 Sprocket, rewind drive ssembly, idlers 00-0 hain 0-00 racket, heater, upper 0-07 racket, reflector ssembly,torque limiter - 00 Sprocket, main roll drive 7-0 Phoenix contact 0-00 racket, heater, lower - 7 Sprocket, motor Heaters Tapered bushing G Pro - Tech pril 999 Page - 7

22 G Pro - Tech pril 999 Page REQ'D DESRIPTION PRT NO. ITEM SHFT,IDL,. /S0 0-0 WSH,THRST,.,.06 /TR SPRKT,,T,. /SF 0- SE,IDL,/8-6 /GS 0- SHS,/ WSH,FLT,/ - 6 WSH,LOK,/ - 7 NUT,HE,/ R 0-0- S 9 DIM. S /.... This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE TOL. P / 6 P.00 P.00 P.00 P.00 TO E NGLES P D TITLE : Pro-Tech Engineering DTE: DRWN Y: DWG SLE: Dwg: 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-86 SSY, SPRKT, IDL, T, SE PTN RS G Pro - Tech Parts Manual F 6 : Idler Sprocket

23 N G Pro - Tech pril 999 Page - 9 D H ROLL,MIN, USH,RNZ,FLNG,.,., /F PLT,RG,ROLL,MIN SHS,/-0. - WSH,LOK,/ - RKT,MTG,HTR,LWR,LP RKT,MTG,HTR SHS, WSH,LOK,0-9 HTR, SPRKT,,T,TPRD /SH -00 USH,TPRD,QD /SH RKT,MTG,SHLD HET 0-0 SHLD,HET,ROLL,MIN T,J-TYPE THERMOOUPLE 0-0 SRW,SHLDR,..8,0-/60-6 OL,SPLT,. /L0F SPRING,WVE /97K WSH,THRST /TR ENTER SPRING OVER SRW,SHLD,.,.7,/ THERMOOUPLE JUNTION HS,# POSITION FOR EST SPRING LOTION DETIL:THERMOOUPLE MOUNTING SLE H POSITION ND/OR END TO HIEVE FLT ONTT WITH ROLL T THERMOOUPLE JUNTION 0 H D.G --. J 98 // H 9 J 97 9// H H G F GT S H H H H H R S R S E D REQ'D R 9 -- S R 9-8- S 9 0 REVISIO 7 SHEET OF UNLESS OTHERWISE TOLERN SPEIFIED E DIM. SHOW TOL S FINIS N. TO H / P / E 6 P..00. P.00. P NGLE.00 SP. P D.00 DESRIPTION TITLE : - DTE : RELES ENO. nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) DRWN SLE Y: : RS : PRT NO. SUPPORT,THERMOOUPLE SPRING HSS #6- x / - FLT WSHER, #6 - ET LOK WSHER, #0-6 R PRO-TEH SSY, ROLL, MIN SIZE : Dwg : ITEM 00-0 D G Pro - Tech Parts Manual F 6 : 00-0 ssembly, Main Roll ( NO )

24 M N R G Pro - Tech pril 999 Page - 0 D PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH REQ'D DESRIPTION PRT NO. ITEM ROLL,PULL,LWR, SHFT,ROLL,PULL,LWR,.7, USH,RNZ,FLNG,.7,,.6 /F USH,KYLS SRW,SHDR,.,.7,/ NUT,NYLO,/ SREW, SHLDR / / - RING,SNP,.7 / LMTR,TORQ,/TL KEY,/6 - SSY,ROLL,PULL 00-6 T 8 H 0 S J 6-8- J 98 /6/ REVISIO E D SHEET OF UNLESS OTHERWISE TOLERN SPEIFIED E DIM. SHOW TOL S FINIS N. TO H / P / E 6 P..00. P.00. P NGLE.00 SP. P D.00 TITLE : - DTE RELES : NO E. nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 SSY,ROLL,PUL L DRWN SLE Y: : RS / PRO-TEH SIZE : Dwg : 00-0 D G Pro - Tech Parts Manual F 6 : 00-0 ssembly, Pull Roll ( NO )

25 J M N. :. R : : : G Pro - Tech pril 999 Page - D 7 PROPRIETR G PRO-TEH LIMS PROPRIETRY Y RIGHTS TO MTERIL DISLOSED ON THIS THE DRWING. IT IS ISSUED IN FOR ENGINEERING INFORMTION ONFIDENE ONLY ND SHLL NOT E OPIED OR DISLOSED REPRODUED, IN WHOLE OR IN PRT, OR USED MNUFTURE OR FOR NY FOR OTHER PURPOSE WITHOUT PERMISSION WRITTEN FROM G PRO- TEH USETION G G G F F F F F F REQ'D DESRIPTION 6 PRT NO. GER,HELI,RH,6DP,T,.0,.7 /6HSR KEY, /6-6 WSH,THRT,.7,,. /T SHS / SHS,/ WSH,LOK,/ - 0 SHFT,RNK,LIFT,ROLL,MIN HNDWHL,6 / WSHER, FLT #0 8 SHS, WSH,LOK,0-6 RKT,MTG,HTR RKT,MTG,HTR, W/ LMP SW,PHEYE /EF-RZ 0-00 RKT,PHEYE,FLON 0-09 SRW,SHLD,.7,.,/ RKET,REFLETOR,PHEYE SHS,/ WSHER,FLT,/6-0 SSY,LIFTER,ROLL,MIN 00-7 SSY,LIFTER,ROLL,MIN T GT S S REVISIO G F E SHEET OF UNLESS OTHERWISE TOLERN SPEIFIED E DIM. SHOW S FINIS N TO H / P /6 E P.00. P.00. NGLE P.00 SP. P.00 D PRO-TEH ITEM nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 SSY,LFTR,ROLL,MI N - DTE DRWN SLE SIZE Dwg 8--9 Y: RELES RS : ENO D D G Pro - Tech Parts Manual F 6 : 00-0 ssembly, Lift Mechanism ( NO )

26 N G Pro - Tech pril 999 Page - E REQ'D DESRIPTION PRT NO. ITEM MOTOR, /8 HP -000 HIN, 00-0 SPROKET,, 0T, /8 ORE -7 HIN, LINK, MSTER 00-0 SREW, SET, / WSHER, LOK, STR, / - 6 WSHER, R, / TERMINL, LOK NUT, NYLOK, SSY, SPROKET, IDLER RELIEF, STRIN, SMLL 7-80 SHS, /-0 - NUT, HE, /-0 - SHS #-0 / - J /8/ H 7 J T 8 98 JT RLM RS REVISIO E D This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE TOLERN SPEIFED E 7 N. Stoughton Rd. Madison, Wisconsin DIM. S TOL SHOW FINIS Phone (608) Fax (608) 6-. N TO H 68 P / / E TITLE 6 : SSY,DRIVE,STNDR P..00 FLON- D P P NGLE DTE DRWN DWG Dwg.00 : Y: SLE: : SP. P D -6-9 RS.00 Pro-Tech Engineering 00-0 G Pro - Tech Parts Manual F 6 : 00-0 ssembly, Drive ( NO )

27 G Pro - Tech pril 999 Page - REQ'D DESRIPTION PRT NO. ITEM IDL,TEN USH,RNZ,FLNG,,.,.7 /F RING,SNP, / This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-68 / TO E TITLE P /6 : P.00 SSY,IDL,TEN,RK.. P.00 F-6. NGLE Dwg P.00 DTE: DRWN Y: DWG SLE: : SP. D P RS Pro-Tech Engineering G Pro - Tech Parts Manual F 6 : Idler, Webbing

28 G Pro - Tech pril 999 Page - D PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH 0 INSERT END OF PNEUMTI TUING INTO THIS HOLE FROM INSIDE RIDGE INET. TO E USED S ONDUIT FOR THE THERMOOUPLE LED E E 7 E 8 REQ'D D.G J.S. 6-- R 9-7- S R 9 -- S R 9-8- S DESRIPTION E D E SHEET OF UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 #REF! TO E E NGLES P D #REF! #REF! nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 #REF! DTE: DRWN Y: SLE: RELESE #REF! #REF! NO. PRT NO.,RDG,FLON 0-00 RKT,MTG,T FN,MUFFIN GURD,FN 8-0 SRW,PN, SHS, WSH,LOK,0-8 GROMMET FT TUING,PNEUMTI,/ 60-0 WIRE HRNESS,DISY HIN R PRO-TEH SIZE: #REF! Dwg: ITEM #REF! D G Pro - Tech Parts Manual F 6 : ridge

29 Q Q Q Q T R T R Q P R R M M M M Q Q Q Q Q Q M N R G Pro - Tech pril 999 Page - D PROPRIETR REQ'D DESRIPTION PRT NO. ITEM G PRO-TEH LIMS PROPRIETRY Y RIGHTS TO INET,RIGHT MTERIL DISLOSED ON THIS THE DRWING. IT IS ISSUED IN FOR ENGINEERING INFORMTION ONFIDENE ONLY ND SHLL NOT E INET,LEFT REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR INET,OVER,RIGHT 0-00 POSITON ND/OR END TO 7 MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO- INET,OVER,LEFT 0-00 HIEVE FLT ONTT WITH TEH ROLL T THERMOOUPLE 0 HS,#0-. - JUNTION TLE,INFEED SSEMLY,RIDGE SSEMLY, SFETY LEL ENTER SPRING OVER RKET,MOUNTING,TIER THERMOOUPLE JUNTION SHS,/ WSHER,LOK,/8 - WIRE INSIDE RIDGE 8 SHFT,IDLER,ENVELOPE SSEMLY SHS, / ONNETOR,OMPRESSION,/ ONDUIT,/ SWITH,POWER,ON/OFF POSITON FOR EST SPRING KNO,SWITH,POWER,ON/OFF ONTT LOK, E-STOP - 8 LOTION SWITH,PLM,EMERGENY STOP - 9 DETIL : THERMOOUPLE MOUNTING DEL,SWITH,EMERGENY STOP SLE 8 SWITH,FOOT -6 THERMOOUPLE, OKJ0 0-0 STRIN RELIEF,/ 7-80 TIE R, UNWIND PLUG,HOLE,DOME,LK,/8 7-0 PLUG,HOLE,DOME, LIGHT,INDITOR,RED SSEMLY, HSSIS WIRE DUT SET ' GROMMET,RUER STRIP SERIL PLTE,GENERI SHS,/ UMPER,RUER,REESSED SSEMLY,PLUG,POWER,V TLE RIVET,/ SUPPORT,TLE,INFEED,FLON Q WSHER,LOK,/8-0 PLUG,HOLE,DOME,LK,/ SEE DETIL J 6-9- T D.G D.G J 98 // H J 97 9/6/ H GT S S 96 REVISIO R Q PLTE,PRESSURE,INFEED STRIP %%. / (600) SUPPORT,THERMOOUPLE SPRING HS #6- x / - 6 FLT WSHER, #6-7 ET LOK WSHER, #0-8 HS 0- x /8-9 P O N M L SHEET OF UNLESS OTHERWISE TOLERN SPEIFIED E DIM. SHOW TOL S FINIS N. TO H / P / E 6 P..00. P.00. P NGLE.00 SP. P D.00 TITLE : DTE RELES : NO E. nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) SSEMLY,INE T - DRWN SLE Y: : RS :8 PRO-TEH SIZE : Dwg : 00-0 D G Pro - Tech Parts Manual F 6 : 00-0 ssembly, abinet ( NO )

30 M G Pro - Tech pril 999 Page - 6 D PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH REQ'D DESRIPTION PRT NO. ITEM STND,LEG SUPPORT,STND 77-0 STOR, SWIVEL, 0-0S--HR-T HS,/ SHS,/- - 7 WSHER,LOK,/ WSHER, / ETERNL STR - 9 NUT, HE HEVY, /- - 0 T S J R 7-- S DIM. S /.... SHEET OF TOL. P / 6 P.00 P.00 P.00 P.00 6 UNLESS OTHERWISE SPEIFIED TOLERNE TO E NGLE SP D 7 8 TITLE : DTE -6-9 : RELESE NO. 9 0 nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 SSY,STND F-6 DRWN SLE Y: : RS /8 PRO-TEH R SIZE : Dwg : 00-0 D G Pro - Tech Parts Manual F 6 : 00-0 Stand

31 G Pro - Tech pril 999 Page - 7 D 6.0 DJUST S NEESSRY FOR TIGHT FIT WITH SIDE FRME PLUNGER DETIL SLE REQ'D DESRIPTION PRT NO. ITEM R,SLITTER PLUNGER,SPRING,STUY /LNK RKET,MOUNTING,R,SLITTER SHS,0-. - WSHER,LOK,#0 - HOLDER,LDE 00-6 This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D Pro-Tech Engineering DTE: DRWN Y: DWG SLE: 0--9 RS 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-68 SSY,SLITTER,FLON F-6 Dwg: 00-0 D G Pro - Tech Parts Manual F 6 : 00-0 Output Slitters

32 H H S R G Pro - Tech pril 999 Page - 8 D PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH (REF 00-00) 6 8 REQ'D 6 7 DESRIPTION J // J 99 // 98 M E D SHEET OF UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D PRT NO. SHFT,DRIVE,REWIND,FLON JOURNL,SHFT,DRIVE,REWIND,FLON SPRING,WVE,OMPRESSION USH,RONZE,.7 /F HUK,ORE,REWIND SREW,SET,/ SS'Y,RKE,REWIND E (REF 00-) nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 DTE: -7-9 DRWN Y: SLE: RELESE RS / NO. PRO-TEH SSY,REWIND,FLON F-6 SIZE: Dwg: ITEM 00-0 D G Pro - Tech Parts Manual F 6 : 00-0 Rewind

33 G Pro - Tech pril 999 Page REQ'D DESRIPTION PRT NO. ITEM TLE,INFEED,V FN,MUFFIN,0 / GURD,FN SREW,PN,6- - RELIEF,STRIN,LE / SSEMLY,LE,POWER,V TLE RELIEF,STRIN,LE / LE,8/ SHIELD,DEFLETOR,FN This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D 6 7 Pro-Tech Engineering 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-68 SSY,TL,INFD,V,FLON-6 F-6 DTE: DRWN Y: DWG SLE: --9 RS Dwg: G Pro - Tech Parts Manual F 6 : Vacuum Table

34 G Pro - Tech pril 999 Page - 0 REQ'D DESRIPTION PRT NO. ITEM DIM. S /.... RKET,MOUNTING,PULL ROLL,UPPER 0-00 USHING,RONZ,FLNGE,.7,, USHING,RONZ,FLNGE,.,.7, This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE P /6 P.00 P.00 P.00 P.00 TO E NGLE SP D Pro-Tech Engineering 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-68 SS'Y,RM,PULL ROLL FLON-6 DTE: DRWN Y: DWG SLE: --9 RS Dwg: 00- G Pro - Tech Parts Manual F 6 : 00 - rm, Pull Roll

35 G Pro - Tech pril 999 Page - REQ'D DESRIPTION PRT NO. ITEM - LE,POWER,8/ 70-0 PLUG,MLE 0-90 U6 RS /.... This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S P /6 P.00 P.00 P.00 P.00 TO E NGLES P D Pro-Tech Engineering 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-86 SSEMLY,LE,POWER,V TLE FLON 6 DTE: DRWN Y: DWG SLE: RS Dwg: 00-7 G Pro - Tech Parts Manual F 6 : 00-7 Power able, Vacuum Table

36 G Pro - Tech pril 999 Page - PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH REQ'D DESRIPTION PRT NO. ITEM KNO,LMP,FEMLE,/ SET SREW /-0. UP POINT SPER USE GREEN LOKTITE TO LOK SREW IN PLE MS J.S RS SHEET OF UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D 6--9 nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 DTE: DRWN Y: SLE: RELESE NO. RS R PRO-TEH SSEMLY,KNO,LMP,RKE FLON 6 SIZE: Dwg: 00- G Pro - Tech Parts Manual F 6 : 00 - ssembly, Knob, rake

37 G Pro - Tech pril 999 Page - OUT PROTE H 7 DF REQ'D DESRIPTION PRT NO. ITEM 00 ONTROLLER,TEMPERTURE 0-00 OVERLY,0-00,%%DF 0-00 HI LO 00- This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S /.... TOL. P / 6 P.00 P.00 P.00 P.00 TO E NGLES P D DTE: DRWN Y: DWG SLE: 7--9 RS Pro-Tech Engineering 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-86 SSEM,ONTROLLER,TEMP,%%DF Dwg: 00- G Pro - Tech Parts Manual F 6 : 00 - Temperature ontroller, o F

38 R G Pro - Tech pril 999 Page - 6 REQ'D DESRIPTION PRT NO. ITEM HOLDER,LDE NUT,T-SLOT,/-0 / KNO,KNURLED /DK PIN,DOWEL,/ SREW,THUM,/ LDE,RZOR SREW,SET,/-0.7 / PRESS INTO PLE ND GLUE WITH LK M NOTE: SEE 00-0 FOR REST OF SLITTER SSEMLY. GREEN LOTITE TO ITEM 7 //99 DD NOTES & DIMENSION LOTING PINS REV EN Y DESRIPTION UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 JH TO E NGLES P D - SLITTER SSEMLY FLON 6 DTE: RELESE NO. nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 DRWN Y: SLE: SIZE: Dwg: 00 - G Pro - Tech Parts Manual F 6 : 00 - Slitter ssembly

39 G Pro - Tech pril 999 Page - REQ'D DESRIPTION PRT NO. ITEM TOWEL,WHITE 7-90 VIDEO ZIPPY KNIFE 7-60 LLEN WRENH SET 7-0 /-0 x SHS FLR STK ITEM FUSE, S, G, TPE MESURE RUER EMENT PIK-UP FUSE, S, G, O ESSORY 7-00 FLON OPERTION MNUL 9000 J H //97 99 J H This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S /.... P / 6 P.00 P.00 P.00 P.00 TO E NGLES P D Pro-Tech Engineering 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-86 ESSORY KIT, FLON DTE: DRWN Y: DWG SLE: RLM Dwg : G Pro - Tech Parts Manual F 6 : 00-7 ccessory Pack

40 G Pro - Tech pril 999 Page - 6 L N SOLDER GROUND WIRE HERE OVER WITH /OD / LG SHRINK TUING TG REQ'D DESRIPTION PRT NO. ITEM WIRE,RED,WG,#F08 - WIRE,GREEN/YELLOW,GROUND,#F08 - WIRE,LT LUE,WG,#F08 - ONNETOR,PUSH ON - ONNETOR,REEPTLE,FEMLE 0-8 This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S /.... P / 6 P.00 P.00 P.00 P.00 TO E NGLE S P D Pro-Tech Engineering 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-86 SSEMLY,PLUG,POWER,V TL F-6 DTE: DRWN Y: DWG SLE: RS Dwg: 00-7 G Pro - Tech Parts Manual F 6 : 00-7 Plug, Power, Vacuum Table

41 G Pro - Tech pril 999 Page - 7 REQ'D DESRIPTION PRT NO. ITEM TLE,INFEED RKET,TLE,RER,LEFT 0-06 RKET,TLE,RER,RIGHT 0-06 SHS,/-0. - WSHER,LOK,/ - HS,/ J 8// H This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S /.... P / 6 P.00 P.00 P.00 P.00 TO E NGLES P D DTE: DRWN Y: DWG SLE: RS c Pro-Tech Engineering 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-68 SSEMLY,TLE,OUTFEED,OPTION F - 6 Dwg: 00-7 G Pro - Tech Parts Manual F 6 : 00-7 Infeed Table

42 R G Pro - Tech pril 999 Page - 8 D G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH 6 PROPRIETRY 9 REQ'D DESRIPTION PRT NO. ITEM SSEMLY,REWIND,FLON 00-0 SSY,SPROKET,IDLER HIN, 00-0 HIN,LINK,MSTER 00-0 SSY,SPROKET,FLON 00- LINK,HIN,/ USH.,RONZE, F JH /6/98 MS --97 SHEET OF UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S TO E / P /6. P.00. P.00. P.00 NGLES P D. P.00 nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) DTE: DRWN Y: SLE: RELESE RS / NO. PRO-TEH SSY,REWIND,OPTIONL FLON-6 SIZE: Dwg: D G Pro - Tech Parts Manual F 6 : Finished Product Rewind

43 . G Pro - Tech pril 999 Page - 9 PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH REQ'D DESRIPTION PRT NO. ITEM TORQUE LIMITER -0 USHING,TORQUE LIMITER 00-0 SPROKET,,T - RSS TIP SET SREW 0- / 00-0 PPLY LURIPLTE DOW # GRESE TO EH SURFE OF RKE PDS. M S J.S SHEET OF UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D DTE: RELESE NO. nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 DRWN Y: R PRO-TEH SSEMLY,TORQUE,LIMITER F - 6 SLE: RS / SIZE: Dwg: G Pro - Tech Parts Manual F 6 : Torque Limiter

44 R G Pro - Tech pril 999 Page - 0 {(9.0)} {(.0)} 6 {(6.0)} {(.0)} 7 8 REQ'D DESRIPTION PRT NO. ITEM DUT OVER, 9 " LG 80-0 DUT SE, 9 " LG ( WITH DHESIVE ) 80-0 DUT OVER, 6." LG 80-0 DUT SE, 6." LG ( WITH DHESIVE ) 80-0 DUT OVER, " LG 80-0 DUT SE, " LG ( WITH DHESIVE ) DUT OVER, " LG DUT SE, " LG ( WITH DHESIVE ) DUT OVER, " LG DUT SE, " LG ( WITH DHESIVE ) {(.0)} 9 0 REV EN Y DESRIPTION UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D DTE: RELESE NO. nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 PNDUIT SSEMLY FLON 6 DRWN Y: SLE: SIZE: Dwg: 00 - G Pro - Tech Parts Manual F 6 : 00 - Panduit Set

45 G Pro - Tech pril 999 Page REQ'D DESRIPTION PRT NO. ITEM HU,RKE,REWIND 6-00 SREW,SET,/ HUK,ORE,QUIK RELESE,REWIND GRIPPER,ORE SREW,SELF-TPING,# WSHER,NYLON SPRING,WVE RKE,DJUST NUT,REWIND This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE 7 N. Stoughton Rd. Madison, Wisconsin 70 DIM. S Phone (608) 6-88 Fax (608) 6-86 TO E / P /6 SS'Y,RKE,REWIND. P.00 F - 6. P.00. P.00 DTE: DRWN Y: DWG SLE: NGLES Dwg: P D. P K.L. Pro-Tech Engineering 00-7 G Pro - Tech Parts Manual F 6 : 00-7 rake, Rewind

46 G Pro - Tech pril 999 Page - PLE INSIDE INET IN VISILE LOTION REQ'D DESRIPTION PRT NO. ITEM DEL,DNGER HZRDOUS VOLTGE 0- DEL,WRNING MOVING PRTS 0- DEL,WRNING RUSH ND URN,RIGHT 0- DEL,WRNING RED MNUL 0- DEL,RED SFETY INSTRUTIONS DEL, HIGH VOLTGE ON OUTSIDE JT This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D DTE: DRWN Y: DWG SLE: --9 K.L. 8 Pro-Tech Engineering KIT, SFETY LEL FLON 6 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-86 Dwg: G Pro - Tech Parts Manual F 6 : Safety Label Kit

47 G Pro - Tech pril 999 Page - REQ'D DESRIPTION PRT NO. ITEM IDLER,INFEED,PPER SHFT,IDLER,INFEED,PPER ERING,FLNGE 06-0 This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D Pro-Tech Engineering 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-86 SSEMLY,IDLER,PPER FLON 6 DTE: DRWN Y: DWG SLE: Dwg: 6--9 RS 00-0 G Pro - Tech Parts Manual F 6 : 00-0 ssembly, Idler, Paper

48 G Pro - Tech pril 999 Page - REQ'D DESRIPTION PRT NO. ITEM SSEMLY,IDLER,PPER 00-0 RKET,MOUNTING,IDLER 0- SHS,/8-6 - WSHER,LOK,/8 - This print is the property of PRO-TEH ENGR. The information thereon is remitted in confidence. UNLESS OTHERWISE SPEIFED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D DTE: DRWN Y: DWG SLE: Pro-Tech Engineering 7 N. Stoughton Rd. Madison, Wisconsin 70 Phone (608) 6-88 Fax (608) 6-86 SSEMLY,IDLER,INFEED,PPER FLON 6 Dwg: 00- G Pro - Tech Parts Manual F 6 : 00 - ssembly, Table Idler

49 R G Pro - Tech pril 999 Page - D PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH REQ'D REPLE SHOULDER OLTS HERE WITH ITEM-6 6 DESRIPTION MOVE TIER SHFT TO THIS LOTION USE EISTING SHOULDER OLTS HERE 69 MS --97 SHEET OF UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S TO E / P /6. P.00. P.00 NGLES. P.00 P D. P.00 PRT NO. SSEMLY,IDLER,INFEED,PPER 00- SSEMLY,REWIND 00-7 SHFT,DUMMY 70-0 NUT,HE,/- - SHS / nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) DTE: DRWN Y: SLE: RELESE RS / NO. PRO-TEH SSEMLY,UNWIND,PPER FLON 6 SIZE: Dwg: ITEM 00- D G Pro - Tech Parts Manual F 6 : 00 - Paper Unwind

50 G Pro - Tech pril 999 Page - 6 PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH REQ'D DESRIPTION PRT NO. ITEM KNO,LMP,FEMLE,/ SET SREW /-0 / UP POINT MS SHEET OF UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 DTE: DRWN Y: SLE: RELESE RS NO. R PRO-TEH SSEMLY,KNO,LMP FLON 6 SIZE: Dwg: 00- G Pro - Tech Parts Manual F 6 : 00 - ssembly, lamp Knob, Unwind

51 N G Pro - Tech pril 999 Page - 7 D PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH REQ'D DESRIPTION PRT NO. ITEM RKET,MOUNTING,UNWIND,RIGHT 0- RKET,MOUNTING,UNWIND,LEFT 0- FHSH, /- / HUK,ORE,QUIK RELESE SREW,SELF-TP,6-.8 GRIPPER,ORE HUK,ORE USH,RNZ,.7,,. /F OLT,SHLDR,.7,.,/8-9 RKE,UNWIND SPRING,WVE,.7 /SSR SETSREW, /8-6 /8, RSS TIP 00-0 SSEMLY,KNO,LMP 00- SSEMLY,KNO,LMP,RKE 00- PIN,DOWEL,/ HUK,ORE WSHER, FEND, / / - 7 WSHER, THRUST/TR J 6/7/ H M 0-- S RL -- M R -0- S REVISIO D SHEET OF UNLESS OTHERWISE TOLERN SPEIFIED E DIM. SHOW TOL S FINIS N. TO H / P / E 6 P..00. P.00. P NGLE.00 SP. P D.00 TITLE : - 7 R PRO-TEH nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 SSEMLY,UNWIND,UPPE R DRWN SLE SIZE DTE Y: : : : RELES 0--9 RS ENO. Dwg : 00- D G Pro - Tech Parts Manual F 6 : 00 - ssembly, Unwind, Upper ( NO )

52 M N R G Pro - Tech pril 999 Page - 8 D PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH 6 REQ'D DESRIPTION PRT NO. ITEM RKET,MOUNTING,UNWIND,RIGHT 0-6 RKET,MOUNTING,UNWIND,LEFT 0- FHSH, /- / HUK,ORE,QUIK RELESE SREW,SELF-TP,6-.8 GRIPPER,ORE HUK,ORE USH,RNZ,.7,,. /F OLT,SHLDR,.7,.,/8-9 RKE,UNWIND SPRING,WVE,.7 /SSR SETSREW, /8-6 /8 RSS TIP 00-0 SSEMLY,KNO,LMP 00- SSEMLY,KNO,LMP,RKE 00- PIN,DOWEL,/ HUK,ORE WSHER, FENDER, / / - 7 WSHER, THRUST/ TR J 6/7/ H S RL -- M REVISIO SHEET OF UNLESS OTHERWISE TOLERN SPEIFIED E DIM. TOL SHOW S FINIS. N TO H / P / E 6 P..00. P.00. P NGLE.00 SP. P D.00 TITLE : DTE RELES : NO E. nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) PRO-TEH SSEMLY,MOUNTING,UNWIND LOWER DRWN SLE SIZE Dwg Y: : : : RS D G Pro - Tech Parts Manual F 6 : 00-6 ssembly, Unwind, Lower ( NO )

53 R G Pro - Tech pril 999 Page - 9 D PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH REQ'D DESRIPTION PRT NO. ITEM LK,GER GER,HELI,RH,MOD SRW,ME,MOD 6-00 USH,RNZ,FLG,.7,,.7 /F USH,RZ,FLG,.6,.7,.0 /F LK,RG,ROLL,MIN,UPR USH,RNZ,FLNG,.,., /F LOK,SPRING,PLTE,ERING SPRING,OMPRESSION,6LS/in STRIP /8 x / JH /6/98 00 SHEET OF UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 DTE: DRWN Y: SLE: RELESE RS / NO. PRO-TEH SSY,LFTR,ROLL,MIN FLON 6 SIZE: Dwg: 00- D G Pro - Tech Parts Manual F 6 : 00 - ssembly, Lift, ontrol

54 G Pro - Tech pril 999 Page - 0 PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH REQ'D DESRIPTION PRT NO. ITEM SHFT,DRIVE,REWIND,FLON KEY,/6.6 - USH,RONZE,.7.7 /F WSHER,THRUST,.7.00 /TR ERING,THRUST,.7 /NT WSHER,THRUST,. /TRE WSHER,THRUST,. /TRD ERING,THRUST, /NT NUT,JM,HE, /-6-9 SPROKET,,T,.7 /S-6 / JT --98 MS --97 SHEET OF UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S /.... P /6 P.00 P.00 P.00 P.00 TO E NGLES P D nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 DTE: DRWN Y: SLE: RELESE MS / NO. R PRO-TEH SSY,SPROKET,FLON - SIZE: Dwg: 00- G Pro - Tech Parts Manual F 6 : 00 - Rewind ssembly, Drive

55 R G Pro - Tech pril 999 Page - D (SIM TO 00-) PROPRIETRY G PRO-TEH LIMS PROPRIETRY RIGHTS TO THE MTERIL DISLOSED ON THIS DRWING. IT IS ISSUED IN ONFIDENE FOR ENGINEERING INFORMTION ONLY ND SHLL NOT E REPRODUED, OPIED OR DISLOSED IN WHOLE OR IN PRT, OR USED FOR MNUFTURE OR FOR NY OTHER PURPOSE WITHOUT WRITTEN PERMISSION FROM G PRO-TEH REQ'D DESRIPTION PRT NO. ITEM LK,GER GER,HELI,RH,MOD SRW,ME,MOD 6-00 USH,RNZ,FLG,.7,,.7 /F USH,RZ,FLG,.6,.7,.0 /F LK,RG,ROLL,MIN,UPR USH,RNZ,FLNG,.,., /F LOK,SPRING,PLTE,ERING SPRING,OMPRESSION,6LS/in STRIP /8 x / JH /6/98 00 SHEET OF UNLESS OTHERWISE SPEIFIED TOLERNE DIM. S TO E / P /6. P.00. P.00. P.00 NGLES P D. P.00 nderson Road, DeForest, Wisconsin Phone (608) 6-88 Fax (608) 6-86 DTE: DRWN Y: SLE: RELESE MRS / NO. PRO-TEH SSY,LFTR,ROLL,MIN FLON 6 SIZE: Dwg: 00-7 D G Pro - Tech Parts Manual F 6 : 00-7 ssembly, Lift, Drive