MAXI-BEAM Sensors. MAXI-BEAM sensors are not suitable for use in personnel safety applications! See WARNING on inside front cover of catalog.

Transcription

1 M-BM ensors R LTD (Most models, exceptions are noted) M-BM ensors M-BM ensors M-BM ccessories ! M-BM sensors are not suitable for use in personnel safety applications! ee WRG on inside front cover of catalog. Banner ngineering orp. Minneapolis, U... Tel:

2 M-BM ensors LTO OF OMPOT FOR M-BM OR M-BM sensors are modular self-contained photoelectric sensors which allow you to create a custom sensor exactly suited for the application. TP ensitivity ontrol Power Block Output OFF LD Output O LD Quick Disconnect (Optional) LD/D ndicator Rotatable ensor Head Programming Ring Optional Logic Module Programming Ring for Logic RWB4 Wiring Base onduit ntrance hoose a sensor head with the required sensing mode TP hoose a power block for the required sensor power (ac or dc) and interface TP dd an RWB4 wiring base TP 4 hoose an optional Timing Logic Module TP 5 imply plug and bolt components together without interwiring to create a complete self-contained photoelectric sensor that is tailored to your exact sensing needs M-BM modular components are sold separately. The three modular components, plus the lenses, are field-replaceable. 456 Banner ngineering orp. Minneapolis, U... Tel:

3 M-BM ensor Heads ensor heads use a unique* programming ring to select eight combinations of sensing range and output response The sensor head may be rotated on the power block in 9 increments ll sensor heads feature Banner s D (lignment ndicating Device) which indicates relative received light signal strength ensitivity adjustment is via a multi-turn, clutched control Rugged construction, with reinforced thermoplastic polyester housing and epoxy-encapsulated circuitry nfrared, 88 nm RB* RBR RBR* RBRR M-BM ensor Heads M-BM sensor head with its programming ring M-BM ensor Head ensing Mode Options Opposed Retroreflective Diffuse onvergent Fixed-Field Glass and Plastic Fiber Optic Range 9 m (') in HP and W modes 4.5 m (5') in HP and W modes Response : ms on/5 off H: ms on/.5 off P:. ms on/off : ms on/5 off H: ms on/.5 off P:. ms on/off Repeatability of Response :.4 ms H:. ms P:.4 ms :.4 ms H:. ms P:.4 ms *U.. Patent #4665 U.. Patent #4569 M-BM mitter (R) and Receiver (R). m. ft. m. ft xcess Gain. m. ft DT. m. ft P DT RB and RBR H P m ft RBR and RBRR H. m. ft m ft m ft 75 mm 5 mm 5 mm 5 mm 5 mm 75 mm 6 mm 4 mm mm mm 4 mm 6 mm Beam Pattern ffective Beam: mm RB/RBR 4 m 8 ft.9 m ft P H 48 m 6 ft RBR/RBRR 7 m 4 ft DT.8 m 6 ft.7 m 9 ft DT 96 m ft ffective Beam:.5 mm P H *M-BM emitters have a visible red tracer beam, a non-active beam that is used as a means of visual alignment during installation.6 m ft 5 in m 4 ft 4.5 m 5 ft 5 in in 5 in in 5 in 6 in 8 in 8 in 6 in Banner ngineering orp. Minneapolis, U... Tel:

4 M-BM ensor Heads RBLV RBLVG OT: Retroreflective range is specified using one model BRT- retroreflector (" diameter). ctual sensing range may be more or less than specified, depending upon the efficiency and reflective area of the retroreflector(s) in use. ee page 7 for more information. Range.5-9 m (6" - ') in all modes m ( - 5') in all modes Response on-polarized, P: 4 ms H: ms Polarized*, P: 4 ms H: ms * Use polarized sensor head whenever shiny objects are sensed. M-BM Retroreflective Mode Repeatability of Response xcess Gain Beam Pattern, P:. ms H:. ms, P:. ms H:. ms. m. ft. m. ft With BRT- Reflector ll modes. m. ft RBLV Retroreflective Mode DT W/BRT- Reflector. m. ft. m. ft RBLVG Retroreflective Mode ll modes DT. m. ft Visible Red, 65 nm on-polarized m ft m ft 5 mm mm 5 mm 5 mm mm 5 mm 75 mm 5 mm 5 mm 5 mm 5 mm 75 mm RBLV Retroreflective Mode m 6.6 ft 4 m ft With BRT- Reflector 6 m ft DT RBLVG Retroreflective Mode m. ft m 6.6 ft DT 8 m 6 ft With BRT- Reflector m ft P 4 m ft Polarized m ft 5 m 6 ft 6. in 4. in. in. in 4. in 6. in. in. in. in. in. in. in 458 Banner ngineering orp. Minneapolis, U... Tel:

5 M-BM ensor Heads nfrared, 88 nm RBD RBDR Range.5 m (5') in HP & W modes 76 mm (") in HP & W modes Response Long Range : ms H: ms P:. ms hort Range : ms H: ms P:. ms M-BM Diffuse Mode Repeatability of Response :. ms H:. ms P:. ms :. ms H:. ms P:. ms. m. ft. mm. xcess Gain H P. m. ft DT mm. RBD Diffuse Mode m. ft mm 4. in m ft mm 75 mm 5 mm 5 mm 5 mm 5 mm 75 mm Beam Pattern Performance based on 9% reflectance white test card P H DT RBDR Diffuse Mode 7.5 mm 5. mm.5 mm.5 mm 5. mm 7.5 mm RBD Diffuse Mode P H. m ft RBDR Diffuse Mode.6 m ft.9 m ft DT. m 4 ft P H 5 mm 6 in mm in 45 mm 8 in DT 6 mm.5 m 5 ft. in. in. in. in. in. in 75 mm in.5 in. in.5 in.5 in. in.5 in Banner ngineering orp. Minneapolis, U... Tel:

6 M-BM ensor Heads RB RBV RBFF5* RBFF* Focus 8 mm (.5") 8 mm (.5") pot ize at Focus:.5 mm (.6") utoff Point 5 mm (") mm (4") Response nfrared 94 nm : ms H: ms P:. ms Visible Red 65 nm : ms H: ms P:. ms Response HP: ms M-BM onvergent Mode Repeatability of Response :. ms H:. ms P:. ms :. ms H:. ms P:. ms. mm. mm. xcess Gain Beam Pattern Performance based on 9% reflectance white test card mm. P & H DT mm. M-BM Fixed-Field Mode* Repeatability of Response HP:. ms DT RB onvergent Mode mm 4. in mm RBV onvergent Mode ll modes mm mm xcess Gain (5 mm). mm. mm. RBFF5 DT Fixed-field mode with 5 mm far limit cutoff *Fixed-field sensor heads are programmable for HP mode, only and will not operate with -wire power blocks mm. mm ee ensing Beam nformation Below 5. mm.5 mm RB onvergent Mode P, H. in. in.5 mm. in 5. mm. in.4 mm.6 mm.8 mm.8 mm.6 mm.4 mm 5 mm in 5 mm in 75 mm in DT RBV onvergent Mode mm.5 mm 5 mm 7.5 mm 5 mm.5 in. in.5 in. in DT 5 mm 5 in 6.5 mm.5 in.9 in.6 in. in. in.6 in.9 in nfrared, 88 nm xcess Gain ( mm) Performance based on 9% reflectance white test card. mm. mm. RBFF DT Fixed-field mode with mm far limit cutoff mm. mm 46 Banner ngineering orp. Minneapolis, U... Tel:

7 M-BM ensor Heads nfrared, 88 nm RBF RBRF RBF Range Range varies with fiber optics used nfrared, 88 nm Range Range varies by sensing mode and fiber optics used M-BM Glass Fiber Optic mitter () and Receiver (R) Response : ms H: ms P:. ms on/off Response : ms H: ms P:. ms on/off Repeatability of Response :. ms H:. ms P:. ms mm. xcess Gain T Fiber (no lenses) mm. M-BM Glass Fiber Optic Repeatability of Response :. ms H:. ms P:. ms. mm.. mm. DT RBF and RBRF H P mm 4. in xcess Gain mm 5 mm mm 5 mm 5 mm mm 5 mm 5 mm mm 5 mm 5 mm mm 5 mm RBF/RBRF P H T Fibers (no lenses) 6 in in in 6 in mm 4 mm 6 mm 8 mm mm 8 in 6 in in DT Beam Pattern Diffuse mode performance based on 9% reflectance white test card mm. P DT H mm. RBF P DT H mm 4. in RBF mm 4. in T Fiber Diffuse Mode BT Fibers mm mm.5 mm Beam Pattern RBF with T fibers P H 6 in in in 6 in mm 4 mm 6 mm 8 mm mm 8 in 6 in in DT RBF 7.5 mm. in Diffuse Mode with BT fiber 5. mm. in P. in.5 mm. in 5. mm. in 7.5 mm. in 5 mm in H 5 mm in 75 mm in DT mm 5 mm 5 in Banner ngineering orp. Minneapolis, U... Tel:

8 M-BM ensor Heads RBFV* Range Range varies by sensing mode and fiber optics used M-BM Glass Fiber Optic - High peed Response H: ms on/off Repeatability of Response H:. ms xcess Gain 75 mm 5 mm 5 mm 5 mm 5 mm 75 mm RBFV Beam Pattern Diffuse mode performance based on 9% reflectance white test card mm.. mm. T Fibers mm. BT Fiber *OT: i) ensor head models RBFV and RBFP are programmable for H mode, only. ii) ensor head models RBFV and RBFP will not operate with -wire power blocks. mm. DT DT RBFV T Fibers mm 4. in RBFV Diffuse Mode BT Fiber mm. mm mm.95 mm. mm.65 mm.65 mm. mm.95 mm Visible red, 65 nm 5 mm in RBFV Diffuse Mode BT 5 mm. in T mm 5 mm 6 in DT mm. 5 mm.6 in DT T mm 8 in BT mm.8 in in in in in in in 5 mm in 5 mm. in.75 in.5 in.5 in.5 in.5 in.75 in 46 Banner ngineering orp. Minneapolis, U... Tel:

9 M-BM ensor Heads RBFP* Visible Red, 65 nm Range Range varies by sensing mode and fiber optics used upply Voltage and urrent Output Response Time Repeatability djustments ndicators onstruction nvironmental Rating ertifications M-BM Plastic Fiber Optic - High peed Response H: ms on/off upplied by power block Repeatability of Response H:. ms xcess Gain 45 mm mm 5 mm 5 mm mm 45 mm RBFP Beam Pattern Diffuse mode performance based on 9% reflectance white test card mm. PT6U Fibers mm. DT RBFP Plastic Fibers PT46U Fibers mm 4. in mm PT6U 5 mm in 5 mm in 75 mm in DT Programmable for, and. milliseconds (except FF, FV and FP models) ee power block specifications for information on additional output switching response delays (OT: millisecond delay on power-up) ee individual sensor mode charts Located on top of sensor head beneath o-ring gasketed cover. 5-turn clutched control (rotate clockwise to increase gain) Red LD on top of sensor head. Banner s exclusive, patented lignment ndicating Device (D ) circuit lights the LD whenever the sensor detects its own modulated light source, and pulses the LD at a rate proportional to the received light signal strength. Reinforced thermoplastic polyester with totally encapsulated circuitry, molded acrylic lenses, and o-ring and quad-ring gasketed components Meets M standards,, 4,, and ; P66 Operating onditions Temperature: -4 to +7 (-4 to +58 F) Maximum relative humidity: 9% at 5 (non-condensing) xcept sensor head models RBR, RBRR, RB, RBFF5, and RBFF. mm. PBT6U Fiber. mm. DT M-BM ensor Head pecifications R LTD R LTD RBFP Diffuse Mode PBT46U Fiber mm. mm 4. in.75 mm.5 mm.5 mm.5 mm.5 mm.75 mm RBFP Diffuse Mode PBT6U PBT46U 7.5 mm 5. mm.5 mm. in.6 in.9 in : RBR, RBRR, RB, RBFF5, and RBFF DT PT46U mm. mm. in 5 mm 5 in.8 in. in.6 in.6 in. in.8 in 7.5 mm.5 in.5 in. in.5 in.5 in. in.5 in Banner ngineering orp. Minneapolis, U... Tel:

10 M-BM Power Blocks M-BM Power Blocks Power Block RWB4 Model RWB4 Wiring Base (order separately) M-BM Wiring Base Description The RWB4 wiring base is used for all M-BM assemblies, except those using power block model RPBTLM (see dimension drawings, page 47). t is sold as a separate item. The RWB4 is designed so that a power block plugs (and bolts) directly into it. The RWB4 may be permanently installed, and all other M- BM sensing components may be quickly and easily exchanged, without disturbing the field wiring. The RWB4 offers heavy-duty screw terminals which accept up to # gauge wire (no lugs are necessary). ll M-BM power blocks plug into an RWB4 wiring base (see below) The RWB4 wiring base is RY for all M-BM assemblies (except sensors using the RPBTLM power block), and must be purchased separately M-BM power blocks provide regulated low voltage dc power to the sensor head and logic module (if one is used) and are are epoxy-encapsulated ll power blocks (except emitter-only types) contain an output switch for interfacing to loads or to control circuitry ll power blocks (except emitter-only types) include two status LDs which continuously indicate the state of the output circuit and input power hown with optional quick-disconnect connector and cable 464 Banner ngineering orp. Minneapolis, U... Tel:

11 M-BM Power Blocks RPBT RPBTLM RPBT- RPB RPBB upply Voltage - V dc m max - V dc m max - V dc m max upply Voltage 5 - V ac - 5V ac Output Type Bi-Polar P/PP Output Type PT olid-state M-BM D Power Blocks Output apacity 5 m each output 5 m each output Output apacity V ac max 75 m max 5V ac max 75 m max On-tate V aturation PP <V at m <V at 5 m P <mv at m <V at 5 m P: <mv at m <V at 5 m PP: <V at m <V at 5 m For RB, RBR and RBF emitters On-tate V aturation <5.V rms at / amp load; <4V rms at m load Off-tate Leakage < µ < µ M-BM -Wire Power Blocks Power block models RPBTLM, RPBU and RPBR do not carry UL or approval. Off-tate Leakage <.7 m Hookup Diagram Load 4 Load bn bu wh Load bk Load 4 Hookup Diagram 4 Load 4 Load + -V dc + -V dc + -V dc 5-V ac -5V ac Banner ngineering orp. Minneapolis, U... Tel:

12 M-BM Power Blocks RPB* RPBB* RPB- RPBB- upply Voltage 5 - V ac - 5V ac 5 - V ac - 5V ac Output Type PT olid-state Output apacity 5V ac max 75 m max On-tate V aturation <.5V ac Off-tate Leakage < µ Hookup Diagram * pecial order models RPBT (V ac) and RPBBT (4V ac) are available for interfacing to dc loads of up to milliamps Hookup to dc power is without regard to polarity. M-BM - and 4-Wire Power Blocks For RB, RBR and RBF emitters Load Load 5-V ac -5V ac 5-V ac -5V ac Power block models RPBR and RPBR use partial phase firing power conversion. The collective current demand of several of these power blocks on a common ac line is significant. f this is a consideration, contact your local Banner sales engineer or the factory pplication ngineering Department for advice. Power demand is not an issue when the RPBR or RPBR are powered from direct current (-V dc). 466 Banner ngineering orp. Minneapolis, U... Tel:

13 M-BM Power Blocks RPBR RPBR RPBU upply Voltage - V dc or - 5V ac 4 m max - V dc or - 5V ac 4 m max - V dc or - 5V ac 4 m max upply Voltage and urrent upply Protection ircuitry Output onfiguration Output Protection ircuitry Output Response Time onstruction nvironmental Rating ertifications Output Type PT lectromechanical relay PDT lectromechanical relay PT solated olid-state M-BM /D Power Blocks Output apacity 5V ac max V dc max 5 max 5V ac max V dc max 5 max 4V ac or dc max m max On-tate V aturation il il Off-tate Leakage il il <V at m < m M-BM and D Power Block pecifications ee individual model specifications Hookup Diagram 4 Load Protected against transient voltages. D power blocks are protected against reverse polarity. ee individual model specifications 4 4 Load Load Load -V dc or -5V ac 5 V ac or V dc max. -V dc or -5V ac -V dc -5V ac + 4 V ac or dc max. Protected against false pulse on power-up. D power blocks are protected against continuous overload or short circuit of outputs. For ac loads: add 8. milliseconds to the off-time response of the sensor block Reinforced thermoplastic polyester, with epoxy-encapsulated circuitry, mm threaded hub for swivel bracket or through-hole mounting Meets M standards,,,, 4,, and ; P66 when assembled with sensor head Operating onditions Temperature: -4 to +7 (-4 to +58 F) except models RPBR and RPBR which are -4 to +5 (-4 to + F) Maximum relative humidity: 9% at 5 (non-condensing) Power block models RPBTLM, RPBU and RPBR do not carry UL or approval. R LTD Banner ngineering orp. Minneapolis, U... Tel:

14 M-BM Logic Modules M-BM Logic Modules Model RLM5 RLM8 M-BM logic module (top), and programming ring for logic (bottom) Timing Function On-delay Off-delay On/Off -delay One-shot Delayed One-shot Timing Range. to second;.5 to 5 seconds. to. second;. to second;.5 to 5 seconds Logic modules stack between the sensor head and power block to add output timing control upplied with a programming ring for selection of eight different combinations of time range and logic function Model RLM5 is programmable for O-delay, OFF-delay, or O/OFF-delay timing Model RLM8 is programmable for One-shot and Delayed One-shot pulse timing Both models feature multi-turn, clutched controls for accurate timing adjustments Once programmed by orientation of the programming ring, the logic module may be rotated on the power block in 9 increments to position the timing adjustments for the most convenient access Rugged construction, with reinforced thermoplastic polyester housing and epoxy-encapsulated circuitry M-BM Logic Modules OUTPUT GL OUTPUT GL OUTPUT GL OUTPUT GL OUTPUT GL Timing Diagram Delay Pulse Hold Delay Pulse Delay Pulse Hold Hold Delay Pulse 468 Banner ngineering orp. Minneapolis, U... Tel:

15 M-BM Logic Modules Response Time Timing Repeatability Timing Range djustments onstruction nvironmental Rating ertifications RLM5: add sensor response delay of approximately % of maximum OFF-DLY time RLM8: no added response time for O-HOT mode ±% of maximum time of the selected range, assuming conditions of constant operating temperature and power supply voltage 5 second ranges:.5 to 5 seconds second ranges:. to second. second ranges:. to. second Two 5-turn clutched potentiometers with brass element, accessible from outside of logic modules, under o-ring gasketed cover screws Molded thermoplastic polyester with epoxy-encapsulated circuitry, quad-ring gasketed Meets M standards,,,, 4,, and ; P66 when assembled with sensor head Operating onditions Temperature: -4 to +7 (-4 to +58 F) Maximum relative humidity: 9% at 5 (non-condensing) OFF-delay,.5 to 5 sec., normally open output Logic Module Programming Ring O-delay,.5 to 5 sec., normally open output O O O O One-shot,. to. sec., normally open output Logic Module One-shot,. to sec., normally open output Programming Ring M-BM Logic Modules pecifications Programming otch O O O O Programming otch R LTD RLM5 Program Definition Diagram RLM8 Program Definition Diagram O/OFF delay,.5 to 5 sec. (both delays), normally open output O/OFF delay,. to sec. (both delays), normally open output OFF delay,.5 to 5 sec., normally closed output O-delay,.5 to 5 sec., normally closed output O/OFF delay,.5 to 5 sec. (both delays), normally closed output O/OFF delay,. to sec. (both delays), normally closed output O-delay function - time range maximum OFF-delay function - time range maximum Output state "O" = normally open, "" = normally closed Delayed one-shot,. to sec. (delay and pulse), normally open output Delayed one-shot,.5 to 5 sec. (delay and pulse), normally open output One-shot,. to. sec., normally closed output One-shot,. to sec., normally closed output Delayed one-shot,. to sec. (delay and pulse), normally closed output Delayed one-shot,.5 to 5 sec. (delay and pulse), normally closed output Delay time function - time range maximum One-shot pulse function - time range maximum Output state "O" = normally open, "" = normally closed Banner ngineering orp. Minneapolis, U... Tel:

16 M-BM ensors Opposed, Retroreflective & Diffuse (model suffix,r, R, RR, LV, LVG, D & DR) ccess to ensitivity djustment Programming Ring 5 mm (# ) crew learance 6. mm x. mm (.6" x.8") pacing ( Mounting Bolts upplied) 4 mm (.6") 9.6 mm (.8") 5. mm (.") ssembled M-BM ensor with tandard Lens D ndicator LD 48 mm (.9") B Output Off ndicator /" - 4 PM onduit ntrance Dimension Dimension B onfiguration 4 mm (4.5") mm (.9") Without Logic Module 7 mm (5.") mm (4.4") With Logic Module Glass Fiber Optic (model suffix F, FV, F & RF) Lens enterline Output On ndicator Plastic Fiber Optic (model suffix FP) 5.8 mm (.") 5.8 mm (.") M-BM Dimensions onvergent ensing Mode (model suffix & V) Maxi-Beam ensor Head (Order eparately) m (6.5') able 5.6 mm (.") Fixed-field Mode (model suffix FF5 & FF) ssembled M-BM sensor w/ RPBTLM D Power Block D ndicator LD 58.7 mm (.") with Logic Module 4.4 mm (.6") without Logic Module Output tatus LD 4. mm (.58") RPBTLM and Programming Ring ccess to ensitivity djustment 48. mm (.9") * ote: #8- x /" long screws are also supplied with RPBTLM for assembly when a logic module is added. 5 mm (.") Lens enterline 9.9 mm (.57") with Logic 7. mm (.7") without #8- x in Long* tainless teel crew (4).5 mm (.") quare crew Pattern 47 Banner ngineering orp. Minneapolis, U... Tel:

17 M-BM ccessories M-BM lens assemblies are field-replaceable. n addition, some lenses may be used to convert from one sensing mode to another, or to change the sensing range of a particular sensor. Upper cover assemblies include lens, replacement bezel, o-ring and stainless steel screws. The possible conversions are listed in the table below. Possible ensing Mode or Model Description Range hanges RU-L RU-G RU-DR RU- RU-F RU-FP Replacement lens for RB, RBR, RBLV, & RBD Replacement lens for RBLVG Replacement lens for RBDR, R & RR Replacement lens for RB & V Replacement lens for RBF & FV Replacement lens for RBFP tyle Model Length 4-Pin Mini onnector to install in RWB4 wiring base Mating ables hange RBLVG to RBLV, RBV to RBLV & RBDR to RBD hange RBLV to RBLVG hange RBD to RBDR & RBF to RBDR hange RBLV to RBV hange RBD to RBF & RBDR to RBF onnector MB-4 adapts any M-BM sensor assembly to accept 4-wire mini-style quick-disconnect cables. Model RF-P Model HF-P MB-4 MB-46 MB-4 MB-4 Replacement Lens ssemblies Quick-Disconnect (QD) ables and onnectors Wire Length: mm (") able Length: m (6.5') 4 m (') 9 m (') able Gland ssembly Description able gland assembly for M-BMs ncludes cord grips for.5 to mm (. -.) diameter cable Bracket lockwasher is also included able Protector Description onnector traight Flexible black nylon cable protector ncludes a neoprene gland that compresses around the M-BM cable to provide an additional seal against moisture Resistant to gasoline, alcohol, oil, grease, solvents and weak acids Working temperature range of - to + (- to + F) Banner ngineering orp. Minneapolis, U... Tel:

18 M-BM ccessories MB7M Model MBUR MB7 MB7F MB7 Description -piece universal swivel bracket for limit-switch style sensors series stainless steel ncludes stainless steel swivel locking hardware MB7: Right angle, -gauge, zinc plated steel, -axis mounting bracket supplied with cable gland assembly and lockwasher MB7F; Flat, single-axis version of MB7, sold without hardware MB7: -gauge, stainless steel version of MB7 sold without hardware Heavy-duty 6 mm (.5") zinc plated steel bracket llows MULT-BM to retrofit to installations of MRO- WTH models ML8 or ML9 sensors ncludes cable gland and lockwasher Mounting Brackets OT: ee p. 746 for additional dimensions ø 4.8 mm to 9.7 mm (.9" to.8") able Gland (upplied) (ot upplied with MB7 Bracket) 7. mm (.8").8 mm (.5") 4.7 mm (.58") Lockwasher 4 mm (4.9") 9. mm (.75") /4" Plated teel 5.4 mm (.") /4 x 8 x /" crew /4" Lock Washer /4" Flat Washer 48 mm (.9") 57. mm (.5") 76 mm (.") Dimensions 76. mm (.") 7/8".T.L.W. (upplied). mm (4.4") (w/logic). mm (.9") (w/o Logic) onduit Fitting ncluded 5.8 mm (.") 9.7 mm (.7") 5.4 mm (.") ø. mm (.84") 5.4 mm (.") 7. mm (6.77") 4. mm (.58"). mm (4.4") (w/logic). mm (.9") (w/o Logic) 57. mm (.5") 7. mm.8" x 9 ( lots) 5.8 mm (.") 69.9 mm (.75") 8 mm (.") 7 mm (5.") (w/ Logic Option) 4 mm (4.5") (Basic Model) 5.4 mm (.") 5 mm (9.9") (w/logic Option) 9 mm (9.4") (w/o Logic Option) 47 Banner ngineering orp. Minneapolis, U... Tel:

19 M-BM ccessories MB7P Model Description Heavy-duty 6 mm (.5") zinc plated steel bracket llows MULT-BM to retrofit to installations of PHOTOWTH series 4RLU or 4RLP sensors ncludes cable gland and lockwasher Mounting Brackets 9 mm (.6") Lockwasher 97 mm (.8") 9. mm (.75") 8. mm (.5") 46. mm (.8") 76 mm (.") Dimensions. mm (4.4") (w/logic). mm (.9") (w/o Logic) 69 mm (.7") onduit Fitting ncluded djustment lots 7. mm (.8") 5.4 mm (.") 5.8 mm (.") Optional Mounting Hole /4" Plated teel 97 mm (.8") 5 mm (9.9") (w/logic Option) 9 mm (9.4") (w/o Logic Option) Banner ngineering orp. Minneapolis, U... Tel:

20 M-BM ccessories OT: 474 Banner ngineering orp. Minneapolis, U... Tel: