WORLD-BEAM QS18. Models N/A. Diffuse N/A. Divergent. Fixed-Field NPN NPN. Fiber Optic. Plastic NPN. Fiber Optic. Glass NPN

Transcription

1 WORLD-BM Q8 Miniature self-contained photoelectric sensors in universal housing Features asily fits (or retrofits) almost any mounting situation xceptional optical performance, comparable to larger M-style or barrel sensors to 3V dc operation, with complementary (PDT) P or PP outputs, depending on model Bright LD operating status indicators are visible from 36 Rugged sealed housing, protected circuitry Models available with or without 8 mm threaded nose Less than millisecond output response for excellent sensing repeatability hoose or 9 m (3') cable or 5 mm (6") Pico-style pigtail QD Models onvergent Retro Polarized Retro Opposed ensing Mode Model* Range Output 94 nm nfrared ffective Beam: 3 mm (.5") 94 nm nfrared ffective Beam: 3 mm (.5") 66 nm Visible Red P 66 nm Visible Red 66 nm Visible Red Q86 Q8V6R Q8VP6R Q86B Q8V6RB Q8VP6RB Q8V6LP Q8VP6LP Q8V6LV Q8VP6LV Q8V6V5 Q8VP6V5 Q8V6V45 Q8VP6V45 2 m (66') 3 m (') 3.5 m (2') 6.5 m (2') (.63') 43 mm (.7") / P PP / P PP P PP P PP P PP P PP Diffuse Divergent Fixed-Field Plastic Fiber Optic Glass Fiber Optic ensing Mode Model* Range Output 94 nm nfrared 94 nm nfrared 66 nm Visible Red 66 nm Visible Red 94 nm nfrared Q8V6D Q8VP6D Q8V6DB Q8VP6DB Q8V6W Q8VP6W Q8V6FF5 Q8VP6FF5 Q8V6FF Q8VP6FF Q8V6FP Q8VP6FP Q8V6F Q8VP6F 45 mm (8") 45 mm (8") mm (4") 5 mm (2") mm (4") Range varies by sensing mode and fiber optics used Range varies by sensing mode and fiber optics used P PP P PP P PP P PP P PP P PP P PP * Only standard 2m (6.5') cable models are listed. For 9 m (3') cable, add suffix W/3 to the model number (e.g., Q86 W/3). QD models: For 4-pin integral uro-style QD, add suffix Q8 (e.g., Q86Q8). For 4-pin 5 mm (6") uro-style pigtail, add suffix Q5 (e.g., Q86Q5). For 4-pin integral Pico-style QD, add suffix Q7 (e.g., Q86Q7). For 4-pin 5 mm (6") Pico-style pigtail, add suffix Q (e.g., Q86Q). Printed in U /4 P/ 6398 rev. G This datasheet has been downloaded from at this page

2 WORLD-BM Q8 pecifications upply Voltage Output onfiguration Output Response Repeatability djustments ndicators to 3V dc (% maximum ripple) at less than 25 m, exclusive of load; Protected against reverse polarity and transient voltages olid-state complementary (PDT); P or PP (current sinking or sourcing), depending on model; Rating: m maximum each output at 25 Off-state leakage current: FF Mode: less than 2 3V dc ll others: less than 5 3V dc O-state saturation voltage: less than m; less m Protected against false pulse on power-up and continuous overload or short circuit of outputs : 75 microseconds O; 375 microseconds OFF FF Mode: 85 microseconds O/OFF ll others: 6 microseconds O/OFF OT: millisecond delay on power-up; outputs do not conduct during this time : microseconds FF Mode: 6 microseconds ll others: 5 microseconds Glass Fiber Optic, Plastic Fiber Optic, onvergent, Diffuse, and Retroreflective mode models (only): ingle-turn sensitivity (Gain) adjustment potentiometer 2 LD indicators Green steady: Power O Green flashing: Output overloaded Yellow* steady: Light sensed Yellow* flashing: Marginal excess gain (. to.5x excess gain) *OT: Prior to date code 223, the output indicator was red. onstruction B housing, rated P67; M 6 3 mm mounting hardware included onnections 4-wire PV cable 9 m (3') 4-wire PV cable Operating onditions Temperature: -2 to +7 (-4 to + 58 F) Relative Humidity: 5 (non-condensing) 4-pin Pico-style QD 4-pin Pico-style 5 mm (6") pigtail QD 4-pin uro-style QD 4-pin uro-style 5 mm (6") pigtail QD ertifications Dimensions and Features 5. mm (.59") 7. mm (.67") 3. mm (.2") Model uffix, R, FF 3. mm (.22") Yellow LD Green LD Model uffix B, RB 2. mm (.82") 3. mm (.2") Model uffix DB, W 2. mm (.82") 3. mm (.2") 27.5 mm (.9") 7. mm (.67") Model uffix FP 5. mm (.59") 7.5 mm (.3") 3. (.53") 24. mm (.95") 35. mm (.38") 5. (.2") 7. (.3") Model uffix V5, V45, D, LV, LP ingle-turn ensitivity djustment 3. mm (.22") 3. mm (.2") Ø3.3 mm (.3") Max. torque.6 m (5 in-lbs) 7. mm (.67") 36.9 mm (.45") Model uffix F 9.8 mm (.78") Q8...FP Fiber nstallation. lide the fiber clip to open. B. nsert fiber ends into each port, as far as they will go.. lide the fiber clip closed, locking fibers into position. B V Models: 33. (.3") M8x Thread Max. torque 2.3 m (-lbs) lot for Fiber lip *Model uffix Q (e.g. Q86Q) *Model uffix Q5 *Model uffix Q7 *Model uffix Q8 (e.g. Q86Q5) (e.g. Q86Q7) (e.g. Q86Q8) Packing List: ensor 24. (.95") M8 x jam nut M3 hardware packet nglish installation sheet, P/ Multi-language installation sheet, P/ M8 x Jam ut 8. mm (.32") M3 Hardware Packet ontents: 2 M3 x.5 x crew 2 M3 x.5 Hex ut 2 M3 Washer 5 mm (6") Pico-style Pigtail 5 mm (6") uro-style Pigtail 4.5 mm (.63") ntegral 4-pin Pico-tyle QD 49 mm (.93") ntegral 4-pin uro-tyle QD 2 P/ 6398 rev. G Banner ngineering orp. Minneapolis, U... Tel:

3 WORLD-BM Q8 Performance urves xcess Gain xcess Gain Opposed G. m.3 ft m Q86 and Q8...R DT m Q86B and Q8...RB m 75 mm 5 mm 25 mm 25 mm 5 mm 75 mm 45 mm 3 mm 5 mm Q86 and Q8...R 4 m 2 ft 8 m 26 ft 2 m 4 ft DT Q86B and Q8...RB 6 m 52 ft 2 m 66 ft 3 in in in 3 in 8 in onvergent* G mm. mm. DT Q8...V5 onvergent Mode mm 4. in Q8...V45 onvergent Mode mm 4. in Q8...V5 onvergent Mode mm. Q8...V45.8 in onvergent Mode 3 mm. DT. 5 mm 2. in..8 in.8 in...8 in G. m.3 ft. m. DT m m 5 mm 3 mm 45 mm.75 m 2.5 ft.5 m 5 ft 2.25 m 7.5 ft DT 3. m ft 3.75 m 2.5 ft 8 in G mm. mm. DT mm 4. in mm 4. in 5 mm. 3 mm. 45 mm.8 in DT 75 mm 3. in.8 in. Polarized Retro Retro G G. m.3 ft. m.3 ft. m. Q8...LP DT. m. DT m Q8...LV m m m 3 mm mm mm 3 mm 5 mm mm 5 mm 5 mm mm 5 mm Q8...LP.75 m 2.5 ft.5 m 5 ft.5 m 5 ft Q8...LV 2.25 m 7.5 ft DT 3. m ft 4.5 m 5 ft DT 3. m ft 6. m 2 ft 3.75 m 2.5 ft 7.5 m 25 ft..8 in...8 in. Diffuse* G G mm. mm. mm. mm. DT DT Q8...D mm 4. in Q8...DB mm 4. in mm 4. in mm 4. in 3 mm mm mm 3 mm Q8...D mm 3 mm 4mm 5 mm 4. in 8. in 2. in 6. in 2. in Q8...DB DT mm 3 mm 4mm 5 mm 4. in 8. in 2. in 6. in 2. in DT..8 in.8 in...8 in...8 in. Divergent* G mm. mm. Q8...W DT Divergent mm 4. in mm 4. in 3 mm mm mm 3 mm Q8...W Divergent.8 in. DT 8 mm 3. mm 4. in..8 in...8 in. *Performance based on 9% reflectance white test card Banner ngineering orp. Minneapolis, U... Tel: P/ 6398 rev. G 3

4 WORLD-BM Q8 Performance urves, continued xcess Gain xcess Gain Fixed Field - 5 mm G. mm.. mm. DT Q8...FF5 Fixed-Field. mm. mm 4. in / Opposed G mm. PT46U Fiber mm. DT Q8..FP Q8..FP PT66U Fiber mm 4. in mm Q8..FP Q8..FP PT46U 5 mm mm PT66U 5 mm DT 8 in 25 mm in..8 in.8 in. Fixed Field - mm G. mm.. mm. DT Q8...FF Fixed-Field. mm. mm 4. in / Bifurcated * G. mm. PBT46U Fiber mm. DT Q8..FP Q8..FP PBT66U Fiber mm. mm 3 mm mm mm 3 mm Q8..FP Q8..FP.8 in PBT46U. DT PBT66U 8 mm 3. mm 4.8 in..8 in...8 in. Opposed Glass Fibers* G. m. T3 Fibers. m. Q8F T23 Fibers DT Glass Fibers T23 Fibers w/l9 lenses m m Q8F 75 mm 3 in 5 mm 25 mm in T3 T23 25 mm in 5 mm 75 mm 3 in mm 3 mm 5 mm 8 in DT Bifurcated Glass Fibers* Q8F Glass Fibers BT23 Fiber G BT3 Fiber mm. mm. DT mm mm.9 mm.3 mm.65 mm.65 mm.3 mm.9 mm 7.5 mm.3 in *Performance based on 9% reflectance white test card BT3 Q8F 5 mm mm.9 in DT BT23 3 mm mm.5 in.75 in.5 in.25 in.25 in.5 in.75 in 4 P/ 6398 rev. G Banner ngineering orp. Minneapolis, U... Tel:

5 WORLD-BM Q8 Hookups Q8 ensors with P (inking) Outputs Q8 ensors with PP (ourcing) Outputs Pico-tyle Pin-out (able onnector hown) uro-tyle Pin-out (able onnector hown) bu (3) bn () bk (4) wh (2) - -3V dc + bn () bu (3) bk (4) wh (2) + -3V dc - Black Wire Blue Wire White Wire Brown Wire () bn (4) bk wh (2) bu (3) bn bu Q8 mitters + -3V dc nstalling Fibers Unterminated Plastic Fiber utting Procedure Unterminated plastic fibers are designed to be cut by the user to the length required for the application. To facilitate cutting, a Banner model PF- cutting device is supplied with the fiber. ut the fiber as follows: ) Locate the control end of the fiber (the unfinished end). Determine the length of fiber required for the application. f using a bifurcated fiber, separate the two halves of the fiber at least 2" beyond the fiber cutting location. Lift the top (blade) of the cutter to open the cutting ports. nsert one of the control ends through one of the cutting ports on the PF- cutter so that the excess fiber protrudes from the back of the cutter. 2) Double-check the fiber length, and close the cutter until the fiber is cut. Using a different cutting port, cut the second control end to the required length. To ensure a clean cut each time, do not use a cutting port more than once. 3) Gently wipe the cut ends of the fiber with a clean, dry cloth to remove any contamination. Do not use solvents or abrasives on any exposed optical fiber. Plastic Fiber nstallation ) Unlock the fiber gripper as shown in Figure 2. f.25 mm or.5 mm core fibers are being used, slide the small fiber adapters onto the fibers, flush with the fiber ends. B) Gently insert the prepared plastic fiber ends into the ports, as far as they will go. ) lide the fiber gripper back to lock, as shown in Figure 2. Glass Fiber nstallation ) nstall the O-ring (supplied with the fiber) on each end, as shown in the drawing. B) While pressing the fiber ends firmly into the portson the front of the sensor, slide the U-shaped retaining clip (supplied with the sensor) into the slot in the sensor s barrel, until it snaps into place. Use small ports for fiber sizes:.25 mm (.").5 mm (.2") Figure. PF- plastic fiber cutter (supplied with fiber) B Lift to Open Ports Figure 2. nstalling plastic fibers Retaining lip utting Ports 4-Large 2-mall Use large ports for fiber sizes:.75 mm (.3"). mm (.4").5 mm (.6") O-ring Figure 3. nstalling glass fibers Banner ngineering orp. Minneapolis, U... Tel: P/ 6398 rev. G 5

6 WORLD-BM Q8 uro-tyle Quick-Disconnect ables tyle Model Length Dimensions Pico-tyle Quick-Disconnect ables tyle Model Length Dimensions traight MQD-46 MQD-45 MQD-43 5 m (5') 9 m (3') M2 x 4 max. (.7") ø 5 mm (.6") traight PKG mm max. (.") ø mm max. (.4") Rightangle MQD-46R MQD-45R MQD-43R 5 m (5') 9 m (3') 38 mm max. (.5") M2 x ø 5 mm (.6") 38 mm max. (.5") Rightangle PKW4-2 ø 8.3 mm (.33") 27.9 mm (.") 4. (.57") Retroreflective Targets Plastic and Glass Fiber Optics ee the ccessories section of your current Banner Photoelectric ensors catalog for complete information. OT: Polarized sensors require corner cube type retroreflective targets only. ee the ccessories section of your current Banner Photoelectric ensors catalog for complete information. WORLD-BM Q8 Mounting Brackets MB8 2-gauge, stainless steel Right-angle mounting bracket MB32 tainless steel 2-axis, side-mounting bracket R 24. (.95") * Use (#8) screws to mount bracket. Drill screw holes 24. (.95") apart. ø 4.* (.8") 3 3 mm (.2") 4.* (.8") 7. (.3") 8.5 mm (.73") 25. (.") 4 (.8") (.6") Refer to your current Banner Photoelectrics catalog for more mounting bracket options 2.5 mm (.") R 5. mm (.2") 2 ø 3.5 mm (.2") mm (.79") R 24. mm (.95") 5 (2) L 3.8 mm (.25") ø 3.5 mm lot (.2") 2. mm (.79") R 3. mm (.2") (2) 2.3 mm (.8") (TYP) 4.3 (.7") lot (2) 6 P/ 6398 rev. G Banner ngineering orp. Minneapolis, U... Tel:

7 WORLD-BM Q8 WRRTY: Banner ngineering orp. warrants its products to be free from defects for one year. Banner ngineering orp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. WRG... ot To Be Used for Personnel Protection ever use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death. These sensors do OT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. sensor failure or malfunction can cause either an energized or de-energized sensor output condition. onsult your current Banner afety Products catalog for safety products which meet OH, and standards for personnel protection. P/ 6398 rev. G Banner ngineering orp., 974 Tenth ve. o., Minneapolis, M 5544 Phone: mail: sensors@bannerengineering.com