D mm. Glass Fiber Models Suffix FV and FVY. Switching. Just above the dark condition

Transcription

1 O 0 0 LM D omplete Family of Plastic and lass ensors Features LD bargraph that indicates signal strength, sensing contrast, programming status and diagnostic warnings, when not in high-speed mode vailable in glass and plastic fiber optic models ncludes marginal gain indicator with alarm output olves routine applications with economical standard models Features high-speed sensing response and higher sensing power in some models xcels in low-contrast applications with ac-coupled models Features easy push-button TH-mode setup on D xpert models asily mounts to standard mm D-rail mounting Photoelectrics ensors ensors pecial Purpose ensors Measurement & nspection ensors Vision Wireless Lighting & ndicators afety Light creens afety Laser canners afety yste afety ontrollers & Modules afety Two-Hand ontrol Modules afety nterlock witches mergency top & top ontrol 0.0 mm.0 mm OR 9.0 mm.0 mm FBR OR D0 D RF PLT FBR L FBR PLT FBR 0.0 mm online UTOD, TP, & PDF P L FBR P mm L PLT FBR Plastic Fiber uffix FP and FPY lass Fiber uffix FV and FVY L FBR D xpert, 0-0V dc ensing Mode/LD L FBR PLT FBR Maximum Range Range varies by sensing mode and fiber optics used. ee data sheet for maximum range specifications. onnection options: model with a QD requires a mating cordset (see 9). witching Threshold etting Just above the dark condition onnection P DFV PP DPFV Midway between dark and light conditions m DFV DPFV Just above the dark condition DFP DPFP Midway between dark and light conditions DFP Visible Red LD DPFP For 9 m cable, add suffix W/0 to the m model number (example, DFV W/0). ourtesy of teven ngineering, nc.-0 Ryan Way, outh an Francisco, Main Office: (0) Outside Local rea: (800)

2 c O K c O c O 0 00 FBR OR PLT FBR L FBR D and D High-peed, 0-0V dc Visible Red LD OR ensing Mode/LD Range onnection L FBR HH-PD L FBR Range varies by sensing mode and fiber optics used Output Response P PP xcess ain m DFV DPFV - & 00 µs - -Pin Pico Pigtail QD DFVQ DPFVQ (p. 9) m DFVY DPFVY -Pin Pico Pigtail QD electable 0 µs or DFVYQ DPFVYQ m 00 µs* DFVY DPFVY -Pin Pico Pigtail QD DFVYQ DPFVYQ - & - (p. 9) OR 9 PLT FBR HH-PD PLT FBR Range varies by sensing mode and fiber optics used m DFP DPFP - & 00 µs - -Pin Pico Pigtail QD DFPQ DPFPQ (p. 9) m DFPY DPFPY -Pin Pico Pigtail QD electable 0 µs or DFPYQ DPFPYQ m 00 µs* DFPY DPFPY -Pin Pico Pigtail QD DFPYQ DPFPYQ - & -8 (p. 9) D High-Power, 0-0V dc Visible Red LD ensing Mode/LD Range onnection Output Response P PP xcess ain PLT FBR Range varies by sensing mode and fiber optics used m DFPH DPFPH µs & -0 -Pin Pico Pigtail QD DFPHQ DPFPHQ (p. 9) D -oupled, 0-0V dc Visible Red LD ensing Mode/LD Range onnection Output Type Output Response m DDBFV L FBR Range varies by Power Level/peed election used and with fiber optics used. ee data sheet for range information. -Pin Pico Pigtail QD DDBFVQ Bipolar 0 µs P/PP m DDBFP PLT FBR onnection options: model with a QD requires a mating cordset (see 9). -Pin Pico Pigtail QD DDBFPQ For 9 m cable, add suffix W/0 to the m model number (example, DFV W/0). Y models have 0 milliseconds output pulse stretcher. * When 0 microseconds is selected, bargraph is disabled. ourtesy of teven ngineering, nc.-0 Ryan Way, outh an Francisco, Main Office: (0) Outside Local rea: (800)

3 D xpert pecifications upply Voltage and urrent upply Protection ircuitry Output onfiguration Output Rating Output Protection ircuitry Output Response Time Output Operation Mode Output Timing Functions Repeatability 0 to 0V dc at m max. (exclusive of load); 0% max. ripple Protected against reverse polarity and transient voltages P open collector (both outputs) or PP open collector (both outputs), depending on model output: ormally open and programmable Light or Dark-Operate; larm output: ormally open 0 m max. each output OFF-state leakage current: less than 0 µ at 0V dc O-state saturation voltage: less than volt at 0 m dc; less than. volts at 0 m dc The total load may not exceed 0 m Protected against false pulse on power-up and short circuit of outputs (trips at m) 00 microseconds O/OFF (0 milliseconds OFF when OFF-delay selected) OT: False pulse protection circuit causes a 0. second delay on power-up Light operate or dark operate: selected by push button O/OFF (no delay) or fixed 0 millisecond OFF-delay; selected by push button microseconds djustments Push-button TH-mode sensitivity setting; teaching input is provided ndicators reen: power O and flashes when ready for teach mode Yellow: output conducting -segment moving dot red LD ee data sheet for detailed information Mounting Bracket D ensors mount directly to a standard D rail, or may be through-hole mounted using the supplied mounting bracket and M x 0. hardware onstruction Black B housing with acrylic cover, stainless steel M x 0. hardware for use with thermoplastic polyester mounting bracket (supplied); the plastic fiber clamping element is acetal nvironmental Rating P; M onnections PV-jacketed m or 9 m cables, or 0 mm pigtail with -pin Pico-style quick-disconnect (QD) are available. QD cordsets are ordered separately. ee 9. Operating onditions Temperature: -0 to 0 Relative humidity: 90% at 0 (non-condensing) ertifications (except D0) Hookup Diagra D9 (p. 8) Photoelectrics ensors ensors pecial Purpose ensors Measurement & nspection ensors Vision Wireless Lighting & ndicators afety Light creens afety Laser canners afety yste afety ontrollers & Modules afety Two-Hand ontrol Modules afety nterlock witches mergency top & top ontrol FBR OR D0 D RF PLT FBR L FBR D tandard, High-peed and High-Power pecifications upply Voltage and urrent upply Protection ircuitry Output onfiguration Output Rating Output Protection ircuitry Output Response Time Output Timing Functions Repeatability djustments 0 to 0V dc at m max. (exclusive of load) Protected against reverse polarity and transient voltages Outputs are P (sinking) or PP (sourcing), depending on model omplementary: one normally open (O) and the other normally closed (); output may be wired as diagnostic alarm output by reversing power supply connections except high speed Y and Y suffix models (see hookups) 0 m max. each output OFF-state leakage current: less than 0 µ at 0V dc O-state saturation voltage: less than volt at 0 m dc; less than. volts at 0 m dc The total load may not exceed 0 m Protected against false pulse on power-up and short circuit of outputs tandard and High-Power : 00 microseconds O/OFF High-peed : selectable 0 or 00 microseconds O/OFF OT: False pulse protection circuit causes a 0. second delay on power-up Y models have fixed 0 milliseconds pulse stretcher (OFF-delay) when 0 microseconds mode is used 0 microseconds; Y and Y models have selectable 0 microseconds/00 microseconds response; repeatability in 0 microseconds mode is microseconds -turn adjustment sensitivity; Y and Y (high speed models) also have a response mode selector switch More on next ourtesy of teven ngineering, nc.-0 Ryan Way, outh an Francisco, Main Office: (0) Outside Local rea: (800)

4 FBR OR PLT FBR L FBR OR D tandard, High-peed and High-Power pecifications (cont d) ndicators Two top-mounted LD indicators: one yellow and one green, and one -segment red LD moving dot bargraph; ote that the -segment bargraph and marginal excess gain indication (bargraph segment #) are inoperative in the 0 µs response mode of Y and Y models reen: LD lights for D Power O Yellow: LD lights for normally open output conducting On all models in 00 microseconds response mode, the -segment moving dot red LD bargraph lights to indicate relative received light signal strength; On all models in 0 and 00 microseconds response mode, segment # flashes to indicate OUTPUT OVRD; On all models in the 00 microseconds response mode, segment # flashes to indicate MRL ; On standard and high power models, a flashing LD corresponds to the O state of the alarm output; (larm output not available on Y & Y models) Mounting Bracket D ensors mount directly to a standard D rail, or may be through-hole mounted using the supplied mounting bracket and M x 0. hardware onstruction Black B housing with acrylic cover, stainless steel M x 0. hardware for use with thermoplastic polyester mounting bracket (supplied); the plastic fiber clamping element is acetal nvironmental Rating P; M onnections PV-jacketed m or 9 m cables, or 0 mm pigtail with -pin Pico-style quick-disconnect (QD) are available. QD cordsets are ordered separately. ee 9. Operating onditions Temperature: -0 to 0 Relative humidity: 90% at 0 (non-condensing) ertifications Hookup Diagra P : D0 (p. ) PP : D0 (p. ) D -oupled pecifications upply Voltage and urrent upply Protection ircuitry Output onfiguration Output Rating Output Protection ircuitry Output Response Time Output Operation Mode Output Timing Functions Repeatability djustments ndicators Mounting Bracket onstruction nvironmental Rating P; M 0 to 0V dc at 0 m max. (exclusive of load) Protected against reverse polarity and transient voltages Bipolar: one P (current sinking) and one PP (current sourcing) open-collector transistor 0 m max. each output OFF-state leakage current: less than 0 µ at 0V dc O-state saturation voltage: less than volt at 0 m dc; less than. volts at 0 m dc The total load may not exceed 0 m Protected against false pulse on power-up and short circuit of outputs 0 microseconds O/OFF OT: False pulse protection circuit causes a 0. second delay on power-up Light operate or dark operate: selected by switch Pulse output; adjustable from to 0 milliseconds microseconds O Three top-panel controls: TVTY control (-turn slotted brass screw, clutched at both ends of adjustment), a light- or dark-operate select switch, and an OUTPUT PUL adjustment (/-turn potentiometer) Three top-mounted LD indicators: reen LD: Lights to indicate dc Power O Yellow LD: Lights for Output onducting Red LD: Lights whenever system is locked onto the signal D ensors mount directly to a standard D rail, or may be through-hole mounted using the supplied mounting bracket and M x 0. hardware Black B housing with acrylic cover, stainless steel M x 0. hardware for use with thermoplastic polyester mounting bracket (supplied); the plastic fiber clamping element is acetal onnections PV-jacketed m or 9 m cables, or 0 mm pigtail with -pin Pico-style quick-disconnect (QD) are available. QD cordsets are ordered separately. ee 9. Operating onditions Temperature: -0 to 0 Relative humidity: 90% at 0 (non-condensing) pplication ote ertifications D -coupled sensors should not be used in areas of known electrical noise or RF fields. 8 Hookup Diagra D0 (p. ) ourtesy of teven ngineering, nc.-0 Ryan Way, outh an Francisco, Main Office: (0) Outside Local rea: (800)

5 ordsets Brackets Photoelectrics ensors ensors pecial Purpose ensors D Pico QD ee 80 nap-on -Pin Length traight Right-ngle.00 m PK- Measurement & nspection ensors PKWZ- pg. 8 pg. D-... Vision pg. MBRF0 MBRFR Wireless Lighting & ndicators dditional bracket information available. ee 0. dditional cordset information available. ee 9. afety Light creens afety Laser canners afety yste afety ontrollers & Modules xcess ain urves afety Two-Hand ontrol Modules (Diffuse-mode performance based on 90% reflectance white test card) afety nterlock witches = Visible Red LD Opposed Mode lass Fiber D tandard 000 O 0 0 O 0 LM 0 w/t Fibers w/t Fibers 0 00 LM Opposed mode 000 DFV models Diffuse Mode lass Fiber D tandard mm (0.0") 0 mm (0.") 00 mm (.0") DT DFV models Diffuse mode w/bt Fiber 00 w/bt Fiber 0 0. mm (0.00") 000 mm (0") Opposed Mode lass Fiber D High peed mm (0.0") 0 mm (0.") DT D FVY & FVY models Opposed mode 00 w/t Fibers 0 w/t Fibers mm (0.0") 00 mm (") Diffuse Mode lass Fiber D High peed 0 mm (0.") 00 mm (.0") 000 mm (0") DT - mergency top & top ontrol DFVY & FVY models Diffuse mode 00 0 w/bt Fiber w/bt Fiber FBR OR D0 0. mm (0.00") mm (0.0") - 0 mm (0.") 00 mm (") DT D RF PLT FBR Range: Varies LD: Range: Varies LD: Opposed Mode Plastic Fiber D tandard 0 mm (0.") 00 mm (.0") c O 0 0 LM c O O 0 0 O -9 Range: Varies 0 mm (0.") 00 mm (") DT 00 mm (.0") DT PTU Fibers LD:.0 mm (0.0") 000 DFPH eries ensors 0 mm (0.") 000 DFPY & FPY models Opposed mode 00 PTU Fibers 0 PTU Fibers.0 mm (0.0") - Diffuse Mode Plastic Fiber D High peed 0 mm (0.") 00 mm (.0") DT Range: Varies LD: 000 mm (0") DFPY & FPY models Diffuse mode 00 PBTU Fiber 0 PBTU Fiber 0. mm (0.00") -8.0 mm (0.0") 0 mm (0.") 00 mm (") DT Range: Varies LD: Diffuse Mode Plastic Fiber D High Power.0 mm (0.0") PBTU Fiber 0. mm (0.00") Range: Varies LD: PTU Fibers 00 - LD: PBTU Fiber L FBR Range: Varies LD: Opposed Mode Plastic Fiber D High peed 000 DFP models Diffuse mode 000 mm (0") DT 000 Opposed Mode Plastic Fiber D High Power PTU Fibers Range: Varies 0 - PTU Fibers 00.0 mm (0.0") Opposed mode LM DFP models Diffuse Mode Plastic Fiber D tandard Range: Varies LD: 00 PBTU Fiber 0 PBTU Fiber mm (0.0") 000 mm (0") -0 DFPH eries ensors 0 mm (0.") 00 mm (.0") 000 mm (0") DT Range: Varies LD: ourtesy of teven ngineering, nc.-0 Ryan Way, outh an Francisco, Main Office: (0) Outside Local rea: (800)

6 HOOKUP WR DRM RFR HRT RY TRTOL RP D Hookups D0 urrent inking (P) D0 mitter RFR urrent ourcing (PP) 0-0V dc 0-0V dc = Brown = Blue = Black 0-0V dc = Brown = White = Blue = Black ot Used -Pin Pico -Pin Pico -Pin Pico -Pin uro -Pin Mini D0 omplementary urrent inking (P) D0 Bipolar (P PP) 0-0V dc omplementary urrent ourcing (PP) 0-0V dc = Brown = White = Blue = Black 0-0V dc = Brown = White = Blue = Black -Pin Pico -Pin uro -Pin Mini -Pin Pico -Pin uro -Pin Mini More on next ourtesy of teven ngineering, nc.-0 Ryan Way, outh an Francisco, Main Office: (0) Outside Local rea: (800)

7 D Hookups ccessories D0 omplementary urrent inking (P) tandard Hookup 0-0V dc D0 omplementary urrent ourcing (PP) tandard Hookup 0-0V dc Reference Hookups Wiring Diagra lossary nternational Reps urrent inking (P) Plus urrent inking larm larm 0-0V dc = Brown = White = Blue = Black urrent ourcing (PP) Plus urrent ourcing larm larm 0-0V dc = Brown = White = Blue = Black -Pin Pico -Pin uro -Pin Pico -Pin uro D0 urrent inking (P) D08 Bipolar (P PP) Programming (.O.) urrent ourcing (PP) -Pin Pico Programming (.O.) 0-0V dc 0-0V dc = Brown = White = Blue = Black -Pin uro * 0-0V dc** *OT: For some Q0 models, gray wire is used for / elect. ee data sheet. ** Bussable Power models are -0V dc -Pin Pico = Brown = White = Blue = Black = ray = Pink -Pin uro ot Used More on next ourtesy of teven ngineering, nc.-0 Ryan Way, outh an Francisco, Main Office: (0) Outside Local rea: (800)

8 HOOKUP WR DRM RFR HRT RY TRTOL RP D Hookups D urrent ourcing (PP) & nalog urrent D8 urrent inking (P) & Health Mode Output RFR ate -V dc -0 m urrent ourcing (PP) & nalog Voltage -V dc 0-0V dc = Brown = White = Blue = Black = ray = Pink -V dc Health ate urrent ourcing (PP) & Health Mode Output Health -V dc = Brown = White = Blue = Black = ray = Pink ate ate -Pin Pico -Pin Pico D9 urrent inking (P) able Hookup D0 M0 D Receivers (P) Light Operate larm 0-0V dc 0-0V dc Programming (.O.) urrent ourcing (PP) able Hookup larm 0-0V dc = Brown = White = Blue = Black = ray M0 D Receivers (P) Dark Operate 0-0V dc = Brown = White = Blue = Black Programming (.O.) -Pin Mini More on next ourtesy of teven ngineering, nc.-0 Ryan Way, outh an Francisco, Main Office: (0) Outside Local rea: (800)