High Precision Clamping System

Transcription

1 Collet Locking- System Made in Switzerland total system runout 3 µm superior clamping force micrun High Precision Clamping System

2 micrun High Precision Clamping System total system runout 3 µm at 3 xd Continous repeatability of high precision system runout Superior clamping force versus other precision clamping systems Collet Locking-System (pat. pend.) retains collet in nut for easier assembly Included with micrun High Precision Colletholder Colletholder with appropriate surface (TC, BT, HSK etc.) High Precision Clamping Nut micrun TC High Precision Colletholder DIN L D Description D [mm] L [mm] TC 30 / MR 16 x TC 30 / MR 16 x TC 30 / MR 25 x TC 40 / MR 11 x TC 40 / MR 16 x TC 40 / MR 16 x TC 40 / MR 16 x TC 40 / MR 25 x TC 40 / MR 25 x TC 40 / MR 25 x TC 40 / MR 32 x TC 40 / MR 32 x TC 40 / MR 32 x micrun BT High Precision Colletholder MAS 403 / JIS B 6339 new gerneration of high precision tool clamping L Swiss Precision Tools D Description D [mm] L [mm] BT 30 / MR 11 x BT 30 / MR 11 x BT 30 / MR 16 x BT 30 / MR 16 x BT 30 / MR 16 x BT 30 / MR 25 x BT 30 / MR 25 x BT 30 / MR 32 x BT 40 / MR 11 x BT 40 / MR 16 x BT 40 / MR 16 x BT 40 / MR 25 x BT 40 / MR 25 x BT 40 / MR 32 x BT 40 / MR 32 x

3 Increases tool life with precise runout High flexibility by usage of collets with different clamping diameters Low noise due to slotless clamping nut micrun Cylindrical Extension Description D [mm] L [mm] CYL 16 x 150 / MR CYL 16 x 200 / MR CYL 20 x 150 / MRM CYL 20 x 200 / MRM L D micrun HSK-A High Precision Colletholder DIN / ISO Description D [mm] L [mm] HSK-A 32 / MRM 16 x HSK-A 32 / MRM 16 x HSK-A 40 / MR 16 x HSK-A 40 / MR 16 x HSK-A 40 / MR 25 x HSK-A 50 / MR 16 x HSK-A 50 / MR 25 x HSK-A 63 / MR 11 x HSK-A 63 / MR 16 x HSK-A 63 / MR 25 x HSK-A 63 / MR 32 x HSK-A 63 / MR 32 x micrun HSK-E High Precision Colletholder DIN / ISO L L D for HSP High Speed Cutting Description D [mm] L [mm] HSK-E 25 / MR 11 x HSK-E 25 / MRM 16 x HSK-E 32 / MR 11 x HSK-E 32 / MRM 16 x HSK-E 40 / MR 11 x HSK-E 40 / MR 11 x HSK-E 40 / MRM 16 x HSK-E 40 / MRM 16 x HSK-E 40 / MR 25 x HSK-E 50 / MR 16 x HSK-E 50 / MR 25 x L D

4 micrun High Precision Collets Clamping-Ø h11 [mm] [Inch] MR 11 MR 16 MR 25 MR / / / / / More information about accessories Sealing disks/coolant flush disks Torque wrenches micrun High Precision Clamping Nuts Description A [mm] B [mm] L1 [mm] Hi-Q / MR Hi-Q / MR Hi-Q / MRM Hi-Q / MR Hi-Q / MR When ordering a micrun High Precision Colletholder this type of clamping nut is included L1 micrun Freewheel Wrench Heads A-FLS Description D [mm] D1 [mm] A-FLS Ø 16 / MR A-FLS Ø 24 / MRM A-FLS Ø 28 / MR A-FLS Ø 40 / MR A-FLS Ø 50 / MR Grip bar for wrench head G-A micrun High Precision Clamping Nuts for sealing disks/coolant flush disks L1 Torque Wrenches TORCO-FIX V6 All information without guarantee. Description A [mm] B [mm] L1 [mm] Hi-Q / MR Hi-Q / MRM Hi-Q / MR Hi-Q / MR Must be ordered separately The C in the product description stands for Cooling These clamping nuts are designed for coolant applications Usage with sealing disk for cooling through tools Usage with coolant flush disk for cooling along the toolshank depending on tightening torques REGO-FIX AG Obermattweg Tenniken/Switzerland rego-fix@rego-fix.ch Phone Fax

5 Demo-Set recool Dimensionen / Dimensions Ca. 210 mm Gewicht / Weight ca. 900 g Typ Art.Nr. Bezeichnung / Description DSET recool recool RCR / ER 25 DemoSet

6 Pos. Stk Pcs Typ Art.Nr. Bezeichnung / Description 1 1 RCR / ER 25 Nur im Set / only on set recool Spannmutter mit Aussenring / recool clamping nut with outer ring 2 1 SET RHS Schlauch Ø 6 mm mit Spiralfeder, 400 mm / Coolant pipe with protector Ø 6 mm, 400 mm 3 1 SET RVG 1/8" Verschraubung 1/8" BSP gerade / Fitting 1/8 BSP straight 4 1 SET RVA 1/8" Verschraubung 1/8" BSP 90 abgewinkelt / Fitting 1/8 BSP 90 elbow 5 1 SET RVG M8 x Verschraubung M8 x 1 gerade / Fitting M8 x 1 straight 6 1 RBA 12 / Ø 12.0 mm Kugelkopf Adapter 1/8 BSP / Ball adapter 1/8 BSP 7 1 RRA 12 / Ø 12.0 mm AluminiumringAdapter auf 1/8 BSP / Aluminium ring adapter to 1/8 BSP 8 1 ER 25 / Ø 12.0 mm Spannzange ER 25 / Collet ER DS/ER 25 Ø mm Dichtscheibe DS / ER 25 / Sealing disc DS / ER KS/ER 25 Ø Kühlscheibe KS / ER 25 / Coolant flush disc KS / ER E 25 AX Spannschlüssel E 25 AX / Spanner E 25 AX

7 No thru coolant? Now affordable retrofitting with recool! Made in Switzerland recool Coolant Supply

8 recool Rotary Coolant Supply System Converts existing tooling systems to thru coolant at low costs in 2 minutes For using ER-collets in driven tools with metric external thread (ISO 15488/DIN 6499) Speeds up to 6,000 rpm* Coolant pressures up to 20 bar / 290 PSI* Maintenance free coolant lubricated bearings For coolant through tools (with DS sealing discs) and for peripheral cooling (with KS flush discs) *Higher speeds and coolant pressures available upon request. Pheripheral Cooling without recool Limited adjustment of the nozzles or spray tubes with different tool length and diameters Lower tool life since coolant is not led directly to the cutting edge Scattering losses of the spray jet Bad chip removal Internal Cooling with recool Optimum coolant supply (for all tools, also for difficult to access machining) No scattering or spray losses Optimized coolant quantity for each tool + Best chip removal Swiss Precision Tools

9 recool Rotary Coolant Supply System Set RCR/ER RCR/ER RCR/ER RCR/ER RCR/ER RCR/ER The set includes Pos. Pce Description 1 1 RCR/ER recool clamping nut with outer ring 2 1 SET RHS Coolant pipe with protector Ø 6 mm, 400 mm length 3 2 SET RVG 1/8" 0 1/8" BSP straight push-in fitting 4 2 SET RVA 1/8" 90 1/8" BSP 90 elbow push-in fitting recool Optional Accessories REGO-FIX Sealing Discs DS/ER Sealing capacity [mm] DS/ER DS/ER DS/ER DS/ER DS/ER REGO-FIX Coolant Flush Discs KS/ER Clamp. capacity [mm] KS/ER KS/ER KS/ER KS/ER

10 recool Optional Accessories Fittings Straight Fitting 90 Elbow SET RVG M8 x SET RVG 1/8" SET RVA 1/8" Ball Adapters 1/8 BSP RBA 10 / Ø 10.0 mm RBA 11 / Ø 11.0 mm RBA 12 / Ø 12.0 mm RBA 13 / Ø 13.0 mm RBA 14 / Ø 14.0 mm RBA 15 / Ø 15.0 mm RBA 16 / Ø 16.0 mm Aluminium Ring Adapters 1/8 BSP RRA 10 / Ø 10.0 mm RRA 11 / Ø 11.0 mm RRA 12 / Ø 12.0 mm RRA 13 / Ø 13.0 mm RRA 14 / Ø 14.0 mm RRA 15 / Ø 15.0 mm RRA 16 / Ø 16.0 mm REGO-FIX Collets ER Standard Clamp. capacity [mm] ER ER ER ER ER REGO-FIX Collets ER Ultra-Precision Clamp. capacity [mm] ER ER ER ER ER Coolant Pipe with Protector Spanner SET RHS E 16 AX E 20 AX E 25 AX E 32 AX E 40 AX Torque Wrenches TORCO-FIX Range [Nm] TORCO-FIX TORCO-FIX I TORCO-FIX II TORCO-FIX III Wrench Heads A-E 16 AX A-E 20 AX A-E 25 AX A-E 32 AX A-E 40 AX Swiss Precision Tools

11 Made in Switzerland Die Lösung für anspruchsvolle Zerspanung! securgrip Gewindeeinsatz für Weldon-Fläche The solution for challenging machining! securgrip threaded insert for endmill fl at securgrip System pat. pending

12 Das securgrip System 100% Auszugssicherheit durch Kraft- und Formschluss Sichere Spannung des Werkzeugschaftes Standardwerkzeuge mit Weldonfläche ( mm) Keine Sonderbearbeitung des Werkzeugschaftes erforderlich Höhere Produktivität durch Prozess-Sicherheit Mehr Zeitspanvolumen Einmalige Investition in das securgrip System Keine sich wiederholenden Kosten für Sonder-Werkzeugschäfte The securgrip System 100% security against pull out Secure holding of tool shanks Standard tools with endmill flat ( mm) No additional modifi cation on tool shank required Higher productivity by security of process Higher material removal rate One-time investment in securgrip System Without repetitive costs for toolshank modifi cations Programm Program Produkt Product Art.-Nr. PG 25 Art.-Nr. PG 32 securgrip Spannzange Collet securgrip Sicherungsmutter Safety nut PG 25-SG / Ø 12 mm PG 32-SG / Ø 12 mm PG 25-SG / Ø 1/ PG 32-SG / Ø 1/ PG 25-SG / Ø 5/ PG 32-SG / Ø 5/ PG 25-SG / Ø 14 mm PG 32-SG / Ø 14 mm PG 25-SG / Ø 16 mm PG 32-SG / Ø 16 mm PG 25-SG / Ø 18 mm PG 32-SG / Ø 18 mm PG 25-SG / Ø 3/ PG 32-SG / Ø 3/ PG 25-SG / Ø 20 mm PG 32-SG / Ø 20 mm PG 32-SG / Ø 25 mm PG 32-SG / Ø SGN-PG SGN-PG 32 securgrip Gewindeeinsatz Threaded insert SGI Ø 12 mm SGI Ø 18 mm SGI Ø 1/ SGI Ø 3/ SGI Ø 5/ SGI Ø 20 mm SGI Ø 14 mm SGI Ø 25 mm SGI Ø 16 mm SGI Ø 1 securgrip Spannzangenhalter, Spannschlüssel und Griffstange auf Anfrage. securgrip toolholders, wrench and grip bar on request d-e Swiss Precision Tools