UniGard Pin & Sleeve IEC Connector

Transcription

1 UniGard Pin & Sleeve IE onnector E2630 E47956 E everage Plants onstruction Sites Food Processing Marine and Shipboard Pulp & Paper Mills hemical Plants Safety, Performance and Durability In Snap! Extensive Product Family Safe and reliable, portable electrical connections. Wide variety of Plugs, onnectors, Receptacles, Inlets and Mounting oxes. Watertight (IP67) and Splashproof (IP44) versions available. 20, 30, 60 and 100 mp ratings for small, medium or large current loads. ULus Listed for North merican ratings. UL classified to IE309-1 and IE309-2 for North merican and International ratings. omplete interchangeability with all manufacturers IE309-1 and IE309-2 devices. Meets IE309 global configurations for safety in industrial applications. Watertight Watertight design and construction meet stringent IP67 internal protection standards. Rugged thermoplastic housings resist impact or abuse and provide excellent corrosion resistance. Unique Thomas & etts strain relief grip and sealing system assure superior cable retention and watertight conductor termination. Ideal for outdoor, wet, marine and washdown applications. Unique 75% faster assembly with EZ lik handle locking, and EZ Tite cable grip system. Splashproof Suitable for indoor use where splashing liquids and other contaminants may interfere with electrical connections. Ideal for most heavy commercial applications and light industrial applications. vailable in 20 and 30 mp ratings Thomas & etts orporation. Specifications are subject to change without notice. 69

2 UniGard Safety, Performance and Durability EZ lik locking mechanism Self-ligning Solid ontacts Self-aligning Nickel plated full-round pins and sleeves for maximum cool contact area. Sleeve pressure rings ensure constant surface contact force. Nickel plating offers maximum corrosion for any use. The Easy Way EZ lik locking feature on all 20/30 plugs and connectors. Screw ollars Stay Put Turreted grip allows for easy handling. 75% Faster able uilds EZ TITE System One-piece cable gland. Nylon locking screw prevents loosening. EZ hand assembly of cable gland, Grip Tite 6-Finger clamp and onion-ring bushing. Safe onnections Standard Ground contacts make first, break last for safe connections even under load Thomas & etts orporation. Specifications are subject to change without notice.

3 ombination Flap/Screw over Integral neoprene gasket for IP67 Watertight protection. Standard flap cover for IP44 Splashproof protection. Unique flex hinge design. Neoprene able ushing Onion ring design. Universal fit capability. Solid Neoprene Gasket In andle Secure Grip andle Tapered shoulder (20/30). Ribbed (60/100). Grip Tite 6-Finger lamp Provides superior cable retention. Fast and Easy Wiring Unique, one-way terminal access. learly marked terminal connections. Raised Ground Terminal Ensures safe connections every time. Double Secure Wiring Dual, combination point terminal screws for failsafe connections. Standard Interface / World Ready Full International ompliances EN60309 UL lassification to IE309-1 and IE ULus Listing: UL1682/1686 and S 22.2 No E conforms to E Low Voltage Directive. North merican and Global Voltage Polarization clock positions available in all standard ratings. Solid, Safe Voltage Selections One-Piece contact carriers with Full-olor IE standard voltage-phasing oding ensures correct product application every time Thomas & etts orporation. Specifications are subject to change without notice. 71

4 The UniGard Difference Features No Tools, No Screws Necessary EZ lik locking handle saves 75% on assembly time. Unique EZ lik assembly feature on 20 and 30 mp plugs and connectors makes installation and inspection fast and reliable. aptured gaskets in handles seal out water, chemicals and dust. Easy ction Single-Wiring Point ccess Saves Time Wiring ll terminal screws face in same direction allowing installer to make safe and secure conductor terminations in 30% less time than other devices. Rugged, corrosion free thermoplastic housings are color-coded for safe and reliable connections to all other mating type/polarizations, with raised ground terminal standard. Simple able lamping Threaded EZ Tite cable gland on 20 and 30 mp devices makes assembly fast and easy. One-piece lock screw verifies clamp locking hold, with no external metal contact possible. (20 and 30 mp devices) Unique Fast ssembly One-piece EZ Tite cable gland with locking screw loads to cable followed by Grip Tite 6-Finger cable clamp/grip piece. Watertight onion ring bushing fits a wide variety of outside diameters. Watertight and Grip Tite Safety Grip Tite flexible 6-finger clamp teeth holds well beyond all agency test pullout forces. No internal clamps required. vailable in all amperages. The Performance onnection Watertight spring-loaded covers with high-strength flex-hinge screw covers on IP67 devices. Flap covers on IP44 splashproof styles. Safety, performance and durability for all IE309 applications worldwide Thomas & etts orporation. Specifications are subject to change without notice.

5 UniGard Global onfiguration Standards Washdown/ Light Marine Polarization Guide North merican Ratings (spc.) 16a, 5w, 250v, 1h 5 WIRE 3P+N+G 4 WIRE 3P+G onfiguration It s impossible to mismate different voltages of the IE Standard Devices. Device size determines amperage. Each voltage grouping is a different size so they are easily distinguishable for compatibility. ll IE devices are color-coded. Each voltage grouping has its own distinct color coding for mating compatibility. Every IE mating plug grounding pin is a mirror image of the female device. Devices of differing voltages cannot be mated to one another. The Female receptacles and connectors have a clock face voltage polarization. keyway female housing notch is always at 6 o clock reference position. Ground contact (sleeve) position on this clockface establishes voltage polarization. (ie. 7h = 7 o clock ground sleeve position) Male pin positions are mirror image. atalog Numbering System 3Ø 120/208 > 50V 100 to 300 z 3Ø 250V 250/440 to 265/460V 60 z 380 to V 60 z > 250 D 3Ø 480V V US US US 3Ø 277/480V EUR EUR 11 7 EUR 125/250V 12 REEPTLE h ONNETOR 6 250V 380V to 415V 200/346 to 240/ V 60 z > 50V 300 to 500 z 125V 3Ø 600V > 50 to 250 D 3ØY347/600V > 50V 300 to 500 z 3 WIRE 2P+G z to z > 50V 300 to 500 z 100 to /100 to 75/130 Rated Voltage olor Usage (N. mer., R.O.W. Euro V Yellow No. mer. and Euro V lue N. mer. and Euro V Red Euro. 500V + lack N. mer. and Euro. 277/480V Red N. mer. 277V Gray N. mer. 125/250V Orange N. mer. 250/440V Red Latin merica V, 300/400z Green Euro. and N. mer VD White Euro. and N. mer. 220/ z to 250/ z RS 430P9W Suffixes: onstruction Options Internal Protection Polarization/Voltage IP67 = Watertight = W IP44 = Splashproof = S 9 = 9h lock our = 250 V, 3 phase Plug, onnector, Receptacle, Inlet mperage : 20, 30, 60, 100 or EURO 16, 32, 63, 125 Poles & Wires : 2 p 3 w, 3p4 w, 4p5 w 2002 Thomas & etts orporation. Specifications are subject to change without notice. 73

6 UniGard Watertight and Splashproof Pin and Sleeve Devices IP67 and IP44 20 mp IP67 Shown onfiguration Voltage/ able O.D. Poles & Receptacle/ Plug/ lock olor Plug onnector Range Receptacle* Inlet* Wires onnector Inlet our oding Inches 2P3W 4h 125 RS320P4W RS3204W RS320R4W RS3204W 2P3W 6h 250 RS320P6W RS3206W RS320R6W RS3206W WTERTIGT IP67 2P3W 5h 277 RS320P5W RS3205W RS320R5W RS3205W 2P3W 7h 480 RS320P7W RS3207W RS320R7W RS3207W 3P4W 12h 125/250 RS420P12W RS42012W RS420R12W RS42012W 3P4W 9h 3Ø250 RS420P9W RS4209W RS420R9W RS4209W 3P4W 7h 3Ø480 RS420P7W RS4207W RS420R7W RS4207W 3P4W 5h 3Ø600 RS420P5W RS4205W RS420R5W RS4205W 4P5W 9h 3ØY120/208 RS520P9W RS5209W RS520R9W RS5209W 4P5W 7h 3ØY277/480 RS520P7W RS5207W RS520R7W RS5207W 4P5W 5h 3ØY347/600 RS520P5W RS5205W RS520R5W RS5205W IP44 onstruction: No screw collars on male devices; female devices have flap covers only. SPLSPROOF IP44 2P3W 4h 125 RS320P4S RS3204S RS320R4S RS3204S 2P3W 6h 250 RS320P6S RS3206S RS320R6S RS3206S 2P3W 5h 277 RS320P5S RS3205S RS320R5S RS3205S 3P4W 12h 125/250 RS420P12S RS42012S RS420R12S RS42012S 3P4W 9h 3ph.250 RS420P9S RS4209S RS420R9S RS4209S 4P5W 9h 3ph.120/208 RS520P9S RS5209S RS520R9S RS5209S *See Page 81 for back box/mounting options. UL Listing E2630, E47956 UL lassification E Liquidtight onduit dapter Kit 2LTK & 4PW 1 /2" NPT 3LTK W f" NPT Thomas & etts orporation. Specifications are subject to change without notice.

7 UniGard Watertight and Splashproof Pin and Sleeve Devices IP67 and IP44 30 mp IP67 Shown onfiguration Voltage/ able O.D. Poles & Receptacle/ Plug/ lock olor Plug onnector Range Receptacle* Inlet* Wires onnector Inlet our oding Inches 2P3W 4h 125 RS330P4W RS3304W RS330R4W RS3304W 2P3W 6h 250 RS330P6W RS3306W RS330R6W RS3306W WTERTIGT IP67 2P3W 7h 480 RS330P7W RS3307W RS330R7W RS3307W 3P4W 12h 125/250 RS430P12W RS43012W RS430R12W RS43012W 3P4W 9h 3Ø250 RS430P9W RS4309W RS430R9W RS4309W 3P4W 7h 3Ø480 RS430P7W RS4307W RS430R7W RS4307W 3P4W 5h 3Ø600 RS430P5W RS4305W RS430R5W RS4305W 4P5W 9h 3ØY120/208 RS530P9W RS5309W RS530R9W RS5309W 4P5W 7h 3ØY277/480 RS530P7W RS5307W RS530R7W RS5307W 4P5W 5h 3ØY347/600 RS530P5W RS5305W RS530R5W RS5305W IP44 onstruction: No screw collars on male devices; female devices have flap covers only. SPLSPROOF IP44 2P3W 4h 125 RS330P4S RS3304S RS330R4S RS3304S 2P3W 6h 250 RS330P6S RS3306S RS330R6S RS3306S 2P3W 5h 277 RS330P5S RS3305S RS330R5S RS3305S 3P4W 12h 125/250 RS430P12S RS43012S RS430R12S RS43012S 3P4W 9h 3ph.250 RS430P9S RS4309S RS430R9S RS4309S 4P5W 9h 3ph.120/208 RS530P9S RS5309S RS530R9S RS5309S *See Page 81 for back box/mounting options. UL Listing E2630, E47956 UL lassification E Liquidtight onduit dapter Kit 3LTK & 4W d" NPT 3LTK & 4W 1" NPT 3LTK & 4W f" NPT 3LTK W f" NPT 3LTK W 1" NPT 2002 Thomas & etts orporation. Specifications are subject to change without notice. 75

8 UniGard Watertight Pin and Sleeve Devices IP67 60 mp onfiguration Voltage/ able O.D. Poles & Receptacle/ Plug/ lock olor Plug onnector Range Receptacle* Inlet* Wires onnector Inlet our oding Inches 2P3W 4h 125 RS360P4W RS3604W RS360R4W RS3604W 2P3W 6h 250 RS360P6W RS3606W RS360R6W RS3606W WTERTIGT IP67 2P3W 5h 277 RS360P5W RS3605W RS360R5W RS3605W 2P3W 7h 480 RS360P7W RS3607W RS360R7W RS3607W 2P3W 3h 250D RS360P3W RS3603W RS360R3W RS3603W 3P4W 12h 125/250 RS460P12W RS46012W RS460R12W RS46012W 3P4W 9h 3Ø250 RS460P9W RS4609W RS460R9W RS4609W 3P4W 7h 3Ø480 RS460P7W RS4607W RS460R7W RS4607W 3P4W 5h 3Ø600 RS460P5W RS4605W RS460R5W RS4605W 4P5W 9h 3ØY120/208 RS560P9W RS5609W RS560R9W RS5609W 4P5W 7h 3ØY277/480 RS560P7W RS5607W RS560R7W RS5607W 4P5W 5h 3ØY347/600 RS560P5W RS5605W RS560R5W RS5605W *See Page 81 for back box/mounting options. UL Listing E2630, E47956 UL lassification E Note: ll UniGard 60 & 100 mp devices ship standard with IE configuration pilot pin/sleeves used for auxillary contact service. Special construction without these pilot contacts is available. (dd X to end of cat. no.) Liquidtight onduit dapter Kit* 6LTK W f" NPT 6LTK W 1" NPT *dditional sizes available on request Thomas & etts orporation. Specifications are subject to change without notice.

9 UniGard Watertight Pin and Sleeve Devices IP mp WTERTIGT IP67 onfiguration Voltage/ able O.D. Poles & Receptacle/ Plug/ lock olor Plug onnector Range Receptacle* Inlet* Wires onnector Inlet our oding Inches P3W** 6h 250 RS3100P6W RS31006W RS3100R6W RS31006W P3W** 7h 480 RS3100P7W RS31007W RS3100R7W RS31007W P4W 12h 125/250 RS4100P12W RS410012W RS4100R12W RS410012W P4W 9h 3Ø250 RS4100P9W RS41009W RS4100R9W RS41009W P4W 7h 3Ø480 RS4100P7W RS41007W RS4100R7W RS41007W P4W 5h 3Ø600 RS4100P5W RS41005W RS4100R5W RS41005W P5W 9h 3ØY120/208 RS5100P9W RS51009W RS5100R9W RS51009W P5W 7h 3ØY277/480 RS5100P7W RS51007W RS5100R7W RS51007W P5W 5h 3ØY347/600 RS5100P5W RS51005W RS5100R5W RS51005W **See Page 81 for back box/mounting options. **lternate vendor supplied item; construction features will vary from specs in this catalog. Full IE approval and mating guaranteed. ontact Technical Services for inlet/receptacle mounting components. UL Listing E2630, E47956 UL lassification E Note: ll UniGard 60 & 100 mp devices ship standard with IE configuration pilot pin/sleeves used for auxillary contact service. Special construction without these pilot contacts is available. (dd X to end of cat. no.) Liquidtight onduit dapter Kit 10LTK W, 5W 1" NPT 10LTK W, 5W 1.25" NPT 10LTK W, 5W 1.50" NPT For 4 wire and 5 wire plugs and connectors only, contact Technical Services for 3 wire plug and connector conduit adapters wire plugs and connectors use PG48 backhandle thread Thomas & etts orporation. Specifications are subject to change without notice. 77

10 North merican mperages UniGard Series Specifications Performance - Electrical Dielectric Voltage Withstand 3000 Volts for 1 minute (fixed devices) 2200 Volts for 1 minute (portable devices) Maximum Working Voltage 600V/250 VD (minimum creepage and clearances per UL 840) urrent Interrupting/Load reaking Tested to 150% of full rated current for circuit interrupting Temperature Rise Maximum 30 rise at full rated current after 50 cycles overload at 150% rated load at 0.75-pf Endurance with Load 20 mp: 5000 cycles; Load only Per IE309-1 lause mp: 1000 cycles - lternating load 60 mp: 1000 cycles - lternating load 100 mp: 250 cycles - lternating load Performance - Mechanical old (-25 ) Impact Resistance Per UL 1682 Section 34 and IE lause 24 able O.D. ccommodation Round portable service cord from 0.57" O.D. through 1.79" O.D. Terminal Identification In accordance with UL 1682 standards and IE390-1: as L1-L2-L3-N-G able Pull-Out Force Per UL 1682 Section 33 and IE309-1 lause 23 Product Identification Molded-in product trademark(s) and UL approved product label Performance - Environmental Moisture Resistance Flammability Operating Temperatures hemical Resistance orrosion Resistance Per IE309-1; Watertight flap/screw cover on IP67 devices or splashproof flap cover on IP44 devices ll components V1 or better per UL94, V0 product ratings available Maximum ontinuous 90 /194 F, Minimum -25 /-13 F Resists standard industrial hydrocarbons, acids, bases and solvents ll metallic components stainless steel or nickel plated brass Sleeve pressure rings of zinc plated steel Materials ousing Valox ontact arriers Valox able Gland Nut Valox able ushing Solid neoprene, onion ring type O-Ring, Seals & Gaskets Solid neoprene Pins & Sleeves Nickel plated brass Sleeve Force Ring Zinc plated steel Terminal Screws Nickel plated steel Flap/Screw over Springs Stainless steel EZ lik Spring Stainless steel Mounting Flanges Valox ast Enclosures/dapters (Valox is a trademark of GE) 2 Layer electrostatic epoxy coated, copper-free aluminum enclosures (Valox Euro style NM also available) E2630 E47956 E Thomas & etts orporation. Specifications are subject to change without notice.

11 UniGard Series IP67 Dimensions Plug IP67 16/20 and 30/32 ord Grip Range at. No. inches mm inches mm inches mm inches mm 16/20 2P3W /20 3P4W /20 4P5W /32 2P3W /32 3P4W /32 4P5W Plug IP67 60/63 and 100/125 ord Grip Range at. No. inches mm inches mm inches mm inches mm 60/63 2P3W /63 3P4W /63 4P5W /125 3P4W /125 4P5W onnector IP67 16/20 and 30/32 ord Grip Range at. No. inches mm inches mm inches mm inches mm 16/20 2P3W /20 3P4W /20 4P5W /32 2P3W /32 3P4W /32 4P5W onnector IP67 60/63 and 100/125 ord Grip Range at. No. inches mm inches mm inches mm inches mm 60/63 2P3W /63 3P4W /63 4P5W /125 3P4W /125 4P5W Thomas & etts orporation. Specifications are subject to change without notice. 79

12 UniGard Series IP67 Dimensions E ø LERNE OLE F øg D Inlet IP67 16/20 and 30/32 Inlet IP67 16/20 and 30/32 D Inlet IP67 60/63 and 100/125 D E F G at. No. inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm 16/20 2P3W /20 3P4W /20 4P5W /32 2P3W /32 3P4W /32 4P5W Inlet IP67 60/63 and 100/125 D E F G at. No. inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm 60/63 2P3W /63 3P4W /63 4P5W /125 3P4W /125 4P5W I I E ø LERNE OLE F D Receptacle IP67 16/20 and 30/32 D Receptacle IP67 60/63 and 100/125 øg Receptacle IP67 16/20 and 30/32 D E F G I at. No. inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm Inches mm 16/20 2P3W /20 3P4W /20 4P5W /32 2P3W /32 3P4W /32 4P5W Receptacle IP67 60/63 and 100/125 D E F G I at. No. inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm Inches mm 60/63 2P3W /63 3P4W /63 4P5W /125 3P4W /125 4P5W Thomas & etts orporation. Specifications are subject to change without notice.

13 UniGard Series Dimensions cond. E F øe cond. D G F øf E D G D ngle Enclosure ngle dapter Junction ox 20 ngle Enclosures* D E F G at. No. onduit Size Use inches mm inches mm inches mm inches mm inches mm inches mm Inches mm E3-75 f" 20 & 30 Devices E " 20 & 30 Devices E b" 60 Devices E d" 60 Devices E d" 100 Devices E " 100 Devices * For use where there is no existing T& Russellstoll J series junction box installed. For 20/30 inlets, use 60 size. 20 ngle dapters* D E F at. No. Use inches mm inches mm inches mm inches mm inches mm inches mm 3 20 & 30 Devices L 60 Devices L 100 Devices * To be used with J series junction boxes or panel mount. For 20/30 inlets, use 60 size. Rectangular Junction oxes* D E F G at. No. onduit Size Use inches mm inches mm inches mm inches mm inches mm inches mm Inches mm J3-75 f" 20 & 30 Devices J " 20 & 30 Devices J b" 60 Devices J d" 60 Devices J d" 100 Devices J " 100 Devices * Unless otherwise specified, junction boxes are furnished with one conduit size at location. To be used with series angle adapters. For 20/30 inlets, use 60 size Thomas & etts orporation. Specifications are subject to change without notice. 81

14 UniGard International mperages International Ratings ommon polarizations shown other ratings are available contact Technical Services. for 16 or 32 IP67 watertight ratings (-W suffix) substitute -W instead of -S in catalog number. ex. RS316P4W} IP67 IP44 onfiguration Voltage/ able O.D. Poles & Receptacle/ Plug/ lock olor Plug onnector Range Receptacle Inlet Wires onnector Inlet our oding Inches 2P3W 4h 110V RS316P4S RS3164S RS316R4S RS3164S 16 mp IP44 32 mp IP44 2P3W 6h 250V RS316P6S RS3166S RS316R6S RS3166S 3P4W 6h V RS416P6S RS4166S RS416R6S RS4166S / 4P5W 6h V RS516P6S RS5166S RS516R6S RS5166S See Page 74 for onduit dapter Options 2P3W 4h 110V RS332P4S RS3324S RS332R4S RS3324S 2P3W 6h 250V RS332P6S RS3326S RS332R6S RS3326S 3P4W 6h V RS432P6S RS4326S RS432R6S RS4326S 3P4W 3h V Special pplication ontact Technical Services 63 mp IP mp IP / 4P5W 6h V RS532P6S RS5326S RS532R6S RS5326S See Page 75 for onduit dapter Options 2P3W 6h 250V RS363P6W RS3636W RS363R6W RS3636W 3P4W 6h V RS463P6W RS4636W RS463R6W RS4636W / 4P5W 6h V RS563P6W RS5636W RS563R6W RS5636W See Page 76 for onduit dapter Options **2P3W** 6h 250V RS3125P6W RS31256W RS3125R6W RS31256W 3P4W 6h V RS4125P6W RS41256W RS4125R6W RS41256W / 4P5W 6h V RS5125P6W RS51256W RS5125R6W RS51256W **See Page 81 for back box/mounting options. Euro color is red ; devices supplied in North merica will use blue color (mating is not affected.) **lternate vendor supplied item; construction features will vary from specs in this catalog. Full IE approval and mating guaranteed. ontact Technical Services for inlet/receptacle mounting components. UL lassification E Note: ll UniGard 63 & 125 mp devices ship standard with IE configuration pilot pin/sleeves used for auxillary contact service. Special construction without these pilot contacts is available. (dd X to end of cat. no.) Thomas & etts orporation. Specifications are subject to change without notice.

15 International mperages UniGard Series Specifications Performance - Electrical Dielectric Voltage Withstand 3000 Volts for 1 minute per IE309-1, lause 19 Maximum Working Voltage 690V/250 VD (minimum creepage and clearances per IE) urrent Interrupting/Load reaking Tested to 125% rated current at 110% rated voltage per IE309-1 clause 20. Temperature Rise Maximum 50 rise at rated current per IE309-1 lause 22, Table 8 Endurance with Load 16 mp: 5000 cycles; Load only Per IE309-1 lause mp: 1000 cycles - lternating load 63 mp: 1000 cycles - lternating load 100 mp: 250 cycles - lternating load Performance - Mechanical old (-25 ) Impact Resistance Per IE309-1 lause 24; (-25 ) with 75cm drop able O.D. ccommodation Round portable service cords from 14.5mm O.D. through 50mm O.D. Terminal Identification In accordance with IE309-1 standards; as L1-L2-L3-N-G able Pull-Out Force In accordance with IE309-1, lause 23 Product Identification Molded-in product Trademark(s) and E Mark on packaging Performance - Environmental Moisture Resistance Flammability Operating Temperatures hemical Resistance orrosion Resistance UV Resistance Per 309-1; Watertight flap/screw cover on IP67 devices or flap cover on IP44 devices Per IE ; ousing glow wire tested to 650 ; ontact carrier insert tested to 850 Maximum ontinuous 90 /194 F, Minimum -25 /-13 F with impact Resists standard industrial hydrocarbons, acids, bases and solvents ll metallic components stainless steel or nickel plated brass Sleeve pressure rings of zinc plated steel External Thermoplastic components are UV stabilized IP67 Series 2 is suitable for outdoor use Materials ousing Valox ontact arriers Valox able Gland Nut Valox able ushing Solid neoprene, onion ring type O-Ring, Seals & Gaskets Solid neoprene Pins & Sleeves Nickel plated brass Sleeve Force Ring Zinc plated steel Terminal Screws Nickel plated steel Flap/Screw over Springs Stainless steel EZ lik Spring Stainless steel Mounting Flanges Valox ast Enclosures/dapters 2 Layer Electrostatic epoxy coated, copper-free aluminum enclosures (Valox Euro style NM available) E Thomas & etts orporation. Specifications are subject to change without notice. 83

16 UniGard Series IP44 Dimensions Plug IP44 ord Grip Range at. No. inches mm inches mm inches mm inches mm 16/20 2P3W /20 3P4W /20 4P5W /32 2P3W /32 3P4W /32 4P5W onnector IP44 ord Grip Range at. No. inches mm inches mm inches mm inches mm 16/20 2P3W /20 3P4W /20 4P5W /32 2P3W /32 3P4W /32 4P5W I F E ø LERNE OLE øg Inlet IP44 16/20 and 30/32 D Receptacle IP44 16/20 and 30/32 D Inlet IP44 D E F G at. No. inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm 16/20 2P3W /20 3P4W /20 4P5W /32 2P3W /32 3P4W /32 4P5W Receptacle IP44 D E F G I at. No. inches mm inches mm inches mm inches mm inches mm inches mm inches mm inches mm Inches mm 16/20 2P3W /20 3P4W /20 4P5W /32 2P3W /32 3P4W /32 4P5W Thomas & etts orporation. Specifications are subject to change without notice.

17 UniGard IE 309 Safety Interlock New IE 309 Safety Interlock The UniGard Difference Watertight IP67 W suffixes (UL Type 4X construction). Rugged thermoplastic housings resist impact or abuse and provide excellent corrosion resistance. Rugged VØ-5V Flameproof ousings. Ideal for outdoor, wet, marine and washdown applications. Unique industry-first circuit breaker interlock. US: 20, 30, 60, &100 mp sizes. International: 16, 32, 63, 125 mp sizes. Splashproof IP44 S suffixes (NEM 3R construction). Suitable for indoor use where splashing liquids and other contaminants may interfere with electrical connections. Ideal for most heavy commercial applications and light industrial applications. US 20 & 30 & 60 ratings. International 16, 32 and 63 ratings. E E47955 The Only True ircuit reaker Interlocked IE 309 Receptacle (Outlet) ircuit breaker integrated interlock mechanism. UL489 listed 22KI protection. lternate trip ratings available. uxiliary switch option. OR Switched-only Version Rugged UL listed switch. Proven performance components. Thru 600 V. 4p5w + auxiliary contacts capable. Protection and Safety in Power Delivery Red vertical ON indication. Lock on and Lock off positions. ranch circuit load and operation protection, or switched-only version (shown). Mount It nywhere Swivel 3 or 4 point feet variable footprint for flexible mounting. Fits in web of 8" I-eams. Wire It Up, Sideways or Down Top, side, and bottom entry. Industry standard entry sizes. Top & ottom Top Side Entry 20/30 mp 60/100 mp ll 2002 Thomas & etts orporation. Specifications are subject to change without notice. 85

18 UniGard IE 309 Safety Interlock Integral UL489 22KI ircuit reaker OR Switched Interlocked Receptacle Top or Side onduit Entry Gasketed UL Type- 4X onstruction uxiliary Switch and/or Trip Frame Ratings vailable Sturdy right Red EZ andle (Vertical - on) Lock-off & Lock-on Positions UL94 Vø-5V Flame Rated ousing & External omponents ottom onduit Entry Optional 30/60 Location Voltage & Polarization Labeled and olor oded 5 Mounting Points for 3 or 4 Tab Mounting djustable Feet fit any existing mounting! External DIN Rail ard-points IP67 olor oded Flap Screw ap IP44 splashproof also available ccepts UniGard Plugs and all pproved IE 309 lines Thomas & etts orporation. Specifications are subject to change without notice.

19 UniGard IE 309 Safety Interlock New UniGard IE 309 ircuit reaker Interlocked Receptacle 16/20, 30/32, 60/63 and 100/125 International and U.S. Ratings IN LL STNDRD VOLTGE POLRIZTIONS: Range olor ode Usage (N. mer., R.O.W. Euro) 2p3w 3p4w 4p5w V Yellow No. mer. / Euro. 4h 4h V lue N. mer. / Euro. 6h 9h 9h V Red Euro. 9h 6h/3h (spec) 6h 500V + lack N. mer. / Euro. 5h 5h 277/480V Red N. mer. (black-euro) 7h 7h 7h 277V Gray N. mer. 5h 125/250V Orange N. mer. 12h 250/440V Red Latin merica / N. mer 11h 11h/3h to 600V, to 400z Green N. mer. / Euro. 2h 2h 2h ontact T& for other special polarizations. 2 options available Specifications for ny New or Replacement Project MT MI Integral ircuit reaker (UL231 & UL489) Power Outlet > (replaces all Fused-Switched competitor FMIR or MIF series) (US amperage only) Rotary Switched (UL508 & UL98) Manual Motor ontroller Outlet > (replaces all Switched-only competitor MI or MIR series) (ll amperages) RS W Suffixes: onstruction Options rand prefix - or - blank Internal Protection Polarization/Voltage IP67 = Watertight = W IP44 = Splashproof = S 9 = 9h lock our = 250 V, 3 phase Device Type See above mperage : 20, 30, 60, 100 or EURO 16, 32, 63, 125 Poles & Wires : 2 p 3 w, 3 p 4 w, 4p5w 2002 Thomas & etts orporation. Specifications are subject to change without notice. 87

20 UniGard IE 309 Safety Interlock Specifications: IE 309 Interlocked Receptacles North merican Standards Performance Electrical Dielectric Voltage Withstand Maximum Working Voltage urrent Interrupting Short-circuit urrent Rating Operations P Ratings (switch version) ircuit reaker UL Listed Interrupting Rating 3,000 Volts Performance Mechanical 480 Volts RMS (circuit breaker version) 600 Volts RMS (switch version) ertified for current interrupting at full rated current and voltage. 10,000 RMS symmetrical amperes Mechanical: 10,000 cycles Electrical: 6,000 cycles omplies with NE ratings. 22,000 I old (-35 ) Impact In accordance with UL 746. Resistance Wiring ccommodations Suitable for metallic conduit. onduit entry locations at enclosure top and bottom (60 & 100 top only). Terminal Identification In accordance with UL, S and IE309 conventions. Product Identification Identification, ratings and color-code in accordance with UL, S and IE309 requirements. Lockout/Tagout ON and OFF lockout/tagout capability at switch handle. omplies w/ OS Reg. 29FR Mounting External adjustable feet. Performance Environmental Moisture Resistance Flammability Operating Temperatures UV Resistance hemicals Materials Enclosure (all exterior components) ontact arrier Gaskets ontacts (sleeves) ardware (screws & springs) pprovals & ompliances Screw cap version: #UL type 4X, IP67 Flap cap version: IP44 UL94-5V & V0 classifications Maximum ontinuous: 60 (140 F) Minimum ontinuous: -40 (-40 F) UV stabilized material Resists most standard industrial hydrocarbons, acids, bases and solvents. UL94-5V/V0, UV stabilized, impact modified Valox. Molded arc resistant UL94-V0 thermoplastic. Neoprene or EPDM Nickel plated brass Steel with zinc-plated blue chromate or nickel plating. UL 508 & UL98 (switch version), UL 231 & UL489 (circuit breaker version), UL 1682 S 22.2 No. 14, IE309-1, (183) G D 5.1 (129) 7.2 (183) 9.3 (237) 14.6 (370) E F I OVERLL DIMENSIONS (inches - mm) 16/20, 30/32 & 60/63 SWIT VERSIONS OVERLL DIMENSIONS (inches - mm) 30 & 60 REKER ND 100/125 SWIT & REKER VERSIONS 16/20 30/32 60/ /125 DIM. IP44 IP67 IP44 IP67 IP44 IP67 IP44 IP67 IP44 IP67 IP * 3-pt. and 4-pt. mounting positions available. 100 versions have 4-pt. mounting position only. * djustable mounting feet, vertical or horizontal. * slotted through holes for easier alignment. MOUNTING DIMENSIONS (inches - mm) 16/20 100/125 30/32 30 SWIT 60/ DIM. SWIT REKER REKER D E F G I Thomas & etts orporation. Specifications are subject to change without notice.