Wire to Wire Connectors

Size: px

Start display at page:

Download "Wire to Wire Connectors"

Sandra Baldwin
5 years ago
Views:

This is the wire-to-wire for DC power supply compatible with the ACH for PC board. TZ/TZW ZM 1.5mm pitch 1.

7A (AWG#28) MAX50V With the CZ receptacles, TZ (single-row) or TZW (dual-row) s allow wire-to-wire connection.

*Applicable to wide range of panel thickness *The design of the panel lock does not allow the wires to be caught there

Both ZH crimp style and ZR insulation displacement receptacles can be accommodated by the ZM.

JWPF (W to W) PAL 2mm pitch 2mm pitch, Waterproof 3A (AWG#22), With secure 3A (AWG#22) Compact waterproof, using 025

1 TCS (1/9) ACH (W to W) 1mm pitch 1.2mm pitch - With secure 2A (AWG#26) 50V 2A 50V Secure locking structure Countermeasure for unexpected prying insertion This is the wire-to-wire for DC power supply compatible with the ACH for PC board. TZ/TZW ZM 1.5mm pitch 1.5mm pitch - Convertible unit into W to W connection, Matable with CZ receptacle, With panele 2A (AWG#26) MAX 0.7A (AWG#28) MAX50V With the CZ receptacles, TZ (single-row) or TZW (dual-row) s allow wire-to-wire connection. By adding CZ and CZW s, more complicated harness design is possible. *Applicable to wide range of panel thickness *The design of the panel lock does not allow the wires to be caught there before mounting on the panel. Both ZH crimp style and ZR insulation displacement receptacles can be accommodated by the ZM. *The fully shrouded header provides protection from rocking the halves back and forth during mating and unmating. JWPF (W to W) PAL 2mm pitch 2mm pitch, Waterproof 3A (AWG#22), With secure 3A (AWG#22) Compact waterproof, using 025 contacts and a single piece solid wire seal. *Superior contact performance is provided by the double-leaf construction, consisting of a main and assist leaf spring. *Inter-housing lock Applicable to both crimp and insulation displacement style receptacles. *Secure prevents accidental disconnection. *Secondary retainers provide added protection against incomplete insertion or disconnection. *Panel locking type is also available.

PNI (W to W) 2mm pitch (2/9) TR/TRW 2mm pitch, With secure - Inertial lock structure 3A (AWG#22), With panele 1.

With panel lock s <applicable to 0.8mm to 2.

JFA J1000 Series (W to W) HM 2.2mm pitch 6.

style HR/MAX 3A It is a hig reliability corresponding to demand of the miniaturization of electronic equipment and the

Matable with HR receptacles *Both crimp style and insulation displacement HR receptacles can be accommodated by the HM.

6 circuits/awg#20ï¼? MAX 3A for miniaturization of electronic equipment.

2 PNI (W to W) 2mm pitch (2/9) TR/TRW 2mm pitch, With secure - Inertial lock structure 3A (AWG#22), With panele 1.0A (AWG#26) This is a 2.0mm pitch wire-to-wire, having incomplete mating prevention mechanism. With panel lock s <applicable to 0.8mm to 2.0mm thick panels> *Crimp style PHN and insulation displacement KR/CR receptacles can be accommodated by the TR. JFA J1000 Series (W to W) HM 2.2mm pitch 6.2A (3 circuits/awg#18) 125V - Maitable with crimp style/idc style HR receptacle Insulation displacement HR/MAX 2A, Crimp style HR/MAX 3A It is a hig reliability corresponding to demand of the miniaturization of electronic equipment and the wire size of AWG#18. Matable with HR receptacles *Both crimp style and insulation displacement HR receptacles can be accommodated by the HM. tools. *The contacts are individually and totally surrounded by housing walls. JFA J2000 Series (W to W) RCY MAX 4.3A ï¼?6 circuits/awg#20ï¼? MAX 3A for miniaturization of electronic equipment. Center locking or side locking options can be used depending on the required application. Receptacle contacts are designed to be common with all JFA J2000 series. The RCY is a compact, wire-to-wire for use with a variety of circuits, from signal circuits to power supply circuits, in electrical equipment which is becoming more and more compact. The employment of a free spring contact method ensures stable contact performance, and superb working efficiency of insertion and removal.

SM (3/9) THR MAX 3A - Matable with HR receptacle Insulation displacement HR/MAX 2A Crimp

*The contacts are individually surrounded by housing walls.

Double-row, With secure MAX 3A (AWG#20) wire-to-wire that can mate with the socket of XA

Double-row type with secure either for wire-to-wire connection or board-to-wire connection

*Contact lances with stabilizer-function prevents the lance deformation, and secures the

3 SM (3/9) THR MAX 3A - Matable with HR receptacle Insulation displacement HR/MAX 2A Crimp style HR/MAX 3A *High contact pressure *Secure lock mechanism tools. *The contacts are individually surrounded by housing walls. Matable with HR receptacles *Both crimp style and insulation displacement HR receptacles can be accommodated by the THR. *Secure lock mechanism tools XA (W to W) XAD (W to W), With secure MAX 3A (AWG#20), Double-row, With secure MAX 3A (AWG#20) wire-to-wire that can mate with the socket of XA (board-to-wire type). Reliable secondary retainer is available. Panel mount is applicable. Double-row type with secure either for wire-to-wire connection or board-to-wire connection *Newly designed long body box-shaped contact reduces its shaking after mounted in the housing. *Contact lances with stabilizer-function prevents the lance deformation, and secures the stable contact retention force. XAG (W to W) XM (W to W) - With secure 3A (AWG#20), With inner type secure MAX 3A This is a, crimp style, wire-to-wire. *Secondary retainers provide added protection against non-insertion or disconnection. tools.

used. This HIL is 3.3mm pitch wire-to-wire that has a mechanism to prevent an incomplete mating when mating.

0A 1400V 15A (Single circuit/awg#14) Wire-to-wire vertion s, designed for connecting liquid crystal display back light lamp to

Available in both wire-to-board and wire-to-wire connection, the JFA is applicable to a wide range

*Double-spring construction To achieve superior contact reliability the socket contact BL HL (W to W) 3.96mm pitch 3.

4 XMA (4/9) HIL 3.3mm pitch 3A (AWG#22), With inertia force mechanism with secure 5A (2 circuits/awg#18) 300V This is a wire-to-wire, having incomplete mating prevention mechanism. 2-circuit and 3-circuit s have control key to prevent from mating with incorrect circuits, thus, several same circuit s can be used. This HIL is 3.3mm pitch wire-to-wire that has a mechanism to prevent an incomplete mating when mating. BHS (W to W) JFA J300 series (W to W 3.81mm pitch) 3.5mm pitch 3.81mm pitch - For LCD back light lamps, Compact type 1.0A 1400V 15A (Single circuit/awg#14) Wire-to-wire vertion s, designed for connecting liquid crystal display back light lamp to their starters. Available in both wire-to-board and wire-to-wire connection, the JFA is applicable to a wide range of applications e.g. from signal to output circuits. *Double-spring construction To achieve superior contact reliability the socket contact BL HL (W to W) 3.96mm pitch 3.96mm pitch, For short-circuit connection MAX 7A/line, With inner type secure MAX 7A The contacts for short-circuit connection are to be mounted in the housing *Secondary retainers enhance safety in case of partial insertion or accidental release of the contact. *The panel lock is designed to prevent tangling with wires and accidental breakage because of handling. The low insertion force contacts reduce surface finish wear and reduce the effects of stress relaxation. *The panel lock is designed to prevent tangling with wires and accidental breakage because of handling.

SL (5/9) BHM (4.0mm pitch, W to W) 3.96mm pitch 4mm pitch, With inner type secure MAX 7A - For LCD back light lamps 1.

Connector for liquid crystal display back light lamps *Contact lances *Box shaped construction of the housing prevents distortion during

5mm pitch, Waterproof 4A (AWG#22) 5A (AWG#20) 6A (AWG#18) 300ï¼ This JWPS can be used for the place of which especially waterproof is required.

The contacts for the compact EL can be easily inserted into the housings.

5mm pitch, With inner type secure (7A when retainers are mounted), With inertia force mechanism with secure (7A when retainers are mounted) *The

5 SL (5/9) BHM (4.0mm pitch, W to W) 3.96mm pitch 4mm pitch, With inner type secure MAX 7A - For LCD back light lamps 1.0A 600V *The low insertion force contacts reduce surface finish wear and reduce the effects of stress relaxation. Connector for liquid crystal display back light lamps *Contact lances *Box shaped construction of the housing prevents distortion during mating/unmating of the housings. Withstanding voltage is also considered. JWPS (W to W) EL 4mm pitch 4.5mm pitch, Waterproof 4A (AWG#22) 5A (AWG#20) 6A (AWG#18) 300ï¼ This JWPS can be used for the place of which especially waterproof is required. This is the wire-to-wire that is grade 7 ingress protection of JIS C 0920 (IPX7 of IEC 60529). The contacts for the compact EL can be easily inserted into the housings. The plug housing and the receptacle housing can be smoothly mated even if they are mechanically distored. YL YLN 4.5mm pitch 4.5mm pitch, With inner type secure (7A when retainers are mounted), With inertia force mechanism with secure (7A when retainers are mounted) *The secondary retainers enhance safety in case of partial insertion or accidental release of the contact. The YLN adds variation in shape to the existing color variations of the YL in order to improve identification of s. Moreover, this has a mechanism to prevent incomplete mating by utilizing the inertia force generated when the plug and receptacle are mated and therefore, ensures complete mating.

WPJ (W to W) 5mm pitch (6/9) XL (W to W) 5mm pitch, Waterproof 7A (AWG#18) 300V Compact, Water Resist and Durable.

*The box-shaped contacts serve as socket contacts in a wide variety of applications from low-voltage, low-current signal circuits to power

*Since the contacts are individually and totally surrounded by housing walls (egg-crate style), and since the contact pitch is 5.

is applicable to a wide range of applications e.g. from signal to output circuits.

6 WPJ (W to W) 5mm pitch (6/9) XL (W to W) 5mm pitch, Waterproof 7A (AWG#18) 300V Compact, Water Resist and Durable. This for electrical connection can be used on both water and non-water resistance conditions, depending on usage. *The box-shaped contacts serve as socket contacts in a wide variety of applications from low-voltage, low-current signal circuits to power supply circuits. *Since the contacts are individually and totally surrounded by housing walls (egg-crate style), and since the contact pitch is 5.0mm, the electrical creep distances and dielectric spacing are great enough to meet most safety requirements. ZL JFA J300 series (W to W 5.08mm pitch) 5mm pitch 5.08mm pitch 15A (Single circuit/awg#14) 600V *The box-shaped contacts serve as socket contacts in a wide variety of applications from low-voltage, low-current signal circuits to power supply circuits. *Secondary retainers tools Available in both wire-to-board and wire-to-wire connection, the JFA is applicable to a wide range of applications e.g. from signal to output circuits. *Double-spring construction To achieve superior contact reliability the socket contact BHT (W to W) VL (W to W) 5.1mm pitch 6.2mm pitch - For LCD back light lamps 1.0A 1500V, With inner type secure MAX 20A MAX600V Designed for connecting liquid crystal display back light lamps to their starters *With the enough creep distance at the high voltage side, voltage rating can be as high as 1,500V. *Applicable either to wire-to-wire connection or board-to-wire connection. *Pin contact is interchangeable with that of wire-to-wire type BHS s. Designed for circuits requiring up to 20A (1 or 2-circuit with AWG #12 wire). *Secondary retainers

MWP (7/9) BHM (8.0mm pitch, W to W) 7mm pitch 8mm pitch, Waterproof MAX 7A - For LCD back light lamps 1.

Connector for liquid crystal display back light lamps *Contact lances *Box shaped construction of the housing prevents

JFA J5000 series (W to W) CL 50A (Single circuit/awg#8) 600V - IDC style, Branch/Short-circuit connection MAX 17A

Modular type is also available. The CL is a low-voltage, insulation displacement that can be applied using simple tools.

5a(awg#27, #26) circuit/6a(awg#18) Powersupplycircuit/300V - I/O, Hybrid circuit/5a(awg#20) Powersupplycircuit/300V

7 MWP (7/9) BHM (8.0mm pitch, W to W) 7mm pitch 8mm pitch, Waterproof MAX 7A - For LCD back light lamps 1.0A 600V *The low insertion force contacts reduce surface finish wear and reduce the effects of stress relaxation. Connector for liquid crystal display back light lamps *Contact lances *Box shaped construction of the housing prevents distortion during mating/unmating of the housings. Withstanding voltage is also considered. JFA J5000 series (W to W) CL 50A (Single circuit/awg#8) 600V - IDC style, Branch/Short-circuit connection MAX 17A (CL-2218T, CL-2218S) MAX 15A (CL-1814T, CL-1814S) 300V One touch mating and unmating corresponding to high current. Modular type is also available. The CL is a low-voltage, insulation displacement that can be applied using simple tools. DAC (W to W) OTZ - I/O, Hybrid Signal circuit/1.5a(awg#27, #26) circuit/6a(awg#18) Powersupplycircuit/300V - I/O, Hybrid circuit/5a(awg#20) Powersupplycircuit/300V Hybrid type I/O with combined signal and power supply circuits. This OTZ ia a hybrid type I/O with cmbined signal and power supply circuits. *Molded spring structure realized the curtailment of number of component *Space saving *Lever lock function 11mm pitch

(8/9) RFC (W to W) RIC - I/O, Drawer Signal circuit/1.0a(awg#27,#26) - Drawer, Double-row Signal circuit/1.

This is a hybrid type double-row drawer to connect the units, absorbs misalignment between units, and excels durability.

awg#24) circuit/15a (AWG#14) - Drawer, Single-row This is a hybrid type double-row drawer with combined signal and power supply circuits to connect the units.

In unit connection, this RIZ is a hybrid type with combined signal and power supply circuits, absorbs misalignment between units, and excels durability.

RIZ L-Type RPJ - Drawer, Single-row Powersupplycitcuit/ - For rack & panel, Compact type 2A (AWG#24) This is a hybrid type single-row drawer combined signal and power

8 (8/9) RFC (W to W) RIC - I/O, Drawer Signal circuit/1.0a(awg#27,#26) - Drawer, Double-row Signal circuit/1.0a (AWG#26) circuit/15a (AWG#14) Signal/hybrid type drawer for unit connection. The RFC absorbs misalignment between the two units and also excels in durability. This is a hybrid type double-row drawer to connect the units, absorbs misalignment between units, and excels durability. RCZ with lever locking is adopted as applicable socket to prevent coming off the socket and incomplete mating. RIJ RIZ - Drawer, Double-row Signal circuit/2a ï¼?awg#24) circuit/15a (AWG#14) - Drawer, Single-row This is a hybrid type double-row drawer with combined signal and power supply circuits to connect the units. In the signal part, the number of parts reduced by connecting the crimping contact directly. In unit connection, this RIZ is a hybrid type with combined signal and power supply circuits, absorbs misalignment between units, and excels durability. *Pitch for signal circuits is 1.5mm. Single row realizes slim design 9.0mm and space reducing. RIZ L-Type RPJ - Drawer, Single-row Powersupplycitcuit/ - For rack & panel, Compact type 2A (AWG#24) This is a hybrid type single-row drawer combined signal and power supply circuits to connect the units, absorbs misalignment between units, and excels durability. RIZ with lever is adopted as applicable socket to prevent incomplete mating. The pin and socket are adopted for use as the small rack panel. *Compact design Adoption of pin and socket contacts achieves the miniaturization of. *Structure The floating function adopted for receptacle housing (26 circuits) and plug housing (20 circuits) absorbs misalignment

(9/9) RPZ RWZ - I/O, Drawer Tab/10A(PS AWG#16) - Drawer, Double-row Powersupplycitcuit/ circuit and signal circuit integrated hybrid type

*Both plug and receptacle have the ESD shielding shell. *For the grounding purpose, #110 tab is equipped with this.

between units, and excels durability. *Pitch for signal circuits is 1.5mm realizes space reducing of drawer.

hybrid type double-row drawer combined signal and power supply circuits to connect the units.

This hybrid type drawer shares a single design contact between signal and power lines.

9 (9/9) RPZ RWZ - I/O, Drawer Tab/10A(PS AWG#16) - Drawer, Double-row Powersupplycitcuit/ circuit and signal circuit integrated hybrid type drawer. *With low insertion force mechanism, mating/unmating life of 20,000 cycles are guaranteed. *Both plug and receptacle have the ESD shielding shell. *For the grounding purpose, #110 tab is equipped with this. In unit connection, this RWZ is a hybrid type double row drawer with combined signal and power supply circuits, absorbs misalignment between units, and excels durability. *Pitch for signal circuits is 1.5mm realizes space reducing of drawer. RWZ (L-type) TSD - Drawer, Double-row Powersupplycitcuit/ - I/O, Drawer 2A (AWG#24) Signalcircuit/30V Powersupplycircuit/300V This is a hybrid type double-row drawer combined signal and power supply circuits to connect the units. RWZ with lever is adopted as applicable socket to prevent incomplete mating. This hybrid type drawer shares a single design contact between signal and power lines. *The signal contact can be used both for the power and for the signal connections. *Misalignment correction *Highly-reliable contact performance WPK, Waterproof 7A(0.85 sq mm) 12V This is compact and excels in waterproof and durability. This can be used for the place which especially waterproof is required. Its waterproof grade is 7 ingress protection of JIS C 0920 (IEC IPX7).

Wire to Board Crimp style Connectors (1/18)

Wire to Board Crimp style Connectors (1/18) SUH connector 0.8mm pitch Compact type 1.0A 30V APSH connector With secure 1.0A (AWG#28) SUR connector that has been designed for 0.8mm pitch wire-to-board insulation