Y.COM.TW WWW. 0Y.COM.TW WW. Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L
|
|
|
- Giles Lyons
- 5 years ago
- Views:
Transcription
1 The D-sub Connector Series Enters a New Era with Lead-free Products. Determine anchor screw diameters at a glance. Greatly simplified anchor combinations..t.100y. Shielded against EMI..T EMI/RFI shielded hoods available. O Connectors Classification Materials 1042 D-sub Connectors Model XM3B-L XM2C-L XM2E-L XM2F-L Type Sockets with Right-angle Plugs with Right-angle Plugs with Straight DIP Sockets with Straight DIP Terminals DIP Terminals Terminals DIP Terminals 0Y 00Y 100Y.100Y Classification High-density D-sub Connectors nchors Model XM4K XM4L XM4L XM4Z Type Plugs with Right-angle Sockets with Right-angle Sockets with Straight DIP nchor 2 or 3 DIP Terminals DIP Terminals Terminals Ratings and Characteristics Rated current Rated voltage Contact resistance Insulation resistance ithstand voltage Insertion durability Operating temperature Housing Socket contact Plug contact Shell nchors Lock Pin Grounding Fixture 3 (at 20 C) 300 VC 20 mω max. (at 20 mv, 100 m max.).t 1,000 MΩ min. (at 500 VDC for 1 min) 1,000 VC for 1 min (leakage current: 1 m max.) 100 times - 25 to 105 C (with no icing at low temperature) Fiber-glass reinforced PBT resin (UL94V-0)/black Phosphor bronze Brass Steel Brass Brass 0Y.C 0Y 0.100Y.COM.T.1 Y.COM.T.
2 Finish Contact Mating end Nickel base, flash gold plated Terminal Nickel base, flash gold plated Shell Nickel plated nchors Nickel plated Grounding Fixture Straight Nickel plated Right angle Tin plated.t.100y..t Ordering Information D-sub Sockets with Right-angle DIP Terminals O ccessories No anchors nchor 2 (XM4Z-0011) M2. x 5 nchor 2 (XM4Z-0013) 9 XM3B L XM3B L XM3B L 15 XM3B L XM3B L XM3B L 25 XM3B L XM3B L XM3B L 0Y D-sub Plugs with Right-angle DIP Terminals 00Y 100Y.100Y ccessories No anchors nchor 2 (XM4Z-0011) M2. x 5 nchor 2 (XM4Z-0013) 9 XM2C L XM2C L XM2C L 15 XM2C L XM2C L XM2C L 25 XM2C L XM2C L XM2C L D-sub Plugs with Straight DIP Terminals ccessories ithout ground pins No anchors nchor 2 (XM4Z-1011) nchor 2 (XM4Z-1013) M2. x 5 9 XM2E-0940-L XM2E L XM2E L XM2E L.T 15 XM2E-1540-L XM2E L XM2E L XM2E L 25 XM2E-2540-L XM2E L XM2E L XM2E L D-sub Plugs with Straight DIP Terminals ccessories ithout ground pins No anchors nchor 2 (XM4Z-1011) nchor 2 (XM4Z-1013) M2. x 5 0Y.C 9 XM2E-0940-L XM2E L XM2E L XM2E L 0Y 15 XM2E-1540-L XM2E L XM2E L XM2E L 25 XM2E-2540-L XM2E L XM2E L XM2E L 0 Note: For other models with nchors, contact your OMRON representative Y.COM.T.1 Y.COM.T. Connectors
3 High-density D-sub Plugs with Right-angle DIP Terminals 1044.T.100Y. ccessories No anchors nchor 2 (XM4Z-0011) M2. x 5 nchor 2 (XM4Z-0013).T 15 XM4K XM4K XM4K High-density D-sub Sockets with Right-angle DIP Terminals O ccessories No anchors nchor 2 (XM4Z-0011) M2. x 5 nchor 2 (XM4Z-0013) 0Y 15 XM4L XM4L XM4L Y High-density D-sub Sockets with Right-angle DIP Terminals 100Y.100Y ccessories No anchors nchor 2 (XM4Z-0011) M2. x 5 nchor 2 (XM4Z-0013) 15 XM4L XM4L XM4L Note: For other models with nchors, contact your OMRON representative. nchor 2 (Screw Head Length: mm) Type For right-angle DIP terminals For straight DIP terminals.t Lock screw M2. x 5 M3 x 0.5 M2. x 5 M3 x 0.5 Model XM4Z-0021 XM4Z-0022 XM4Z-0023 XM4Z-1021 XM4Z-1022 XM4Z-1023 nchor 3 (Screw Head Length: 4.8 mm) Type For right-angle DIP terminals For straight DIP terminals 0Y.C 0Y Lock screw M2. x 5 M3 x 0.5 M2. x 5 M3 x 0.5 Model XM4Z-0021 XM4Z-0022 XM4Z-0023 XM4Z-1021 XM4Z-1022 XM4Z Y.COM.T.1 Y.COM.T.
4 Dimensions D-sub Sockets with Right-angle DIP Terminals XM3B L XM3B L XM3B L (3.9) B C 2.77.T.100Y. D-sub Plugs with Right-angle DIP Terminals XM2C L XM2C L XM2C L (3.9) B C Two, 3.05±0.1 dia. Board edge N, 1±0.1 dia..t 2.77±0.1 B±0.1 D± ±0.1 ±0.1 No. of B C D O D-sub Plugs with Straight DIP Terminals XM2E L XM2E L XM2E L B C dia. D Y Two, 3.05±0.1 dia. Board edge 00Y N, 1±0.1 dia. 100Y.100Y 2.77±0.1 B±0.1 D± ±0.1 ±0.1 No. of B C D Two, dia. N, 1±0.1 dia..t 2.77±0.1 B±0.1 E±0.1 ±0.1 No. of B C D E 0Y.C Y Y.COM.T.1 Y.COM.T. Connectors
5 D-sub Sockets with Straight DIP Terminals XM2F L XM2F L XM2F L B C dia. D.T.100Y. High-density D-sub Plugs with Right-angle DIP Terminals XM4K (3.94) Two, T dia. N, 1±0.1 dia. O High-density D-sub Sockets with Right-angle DIP Terminals XM4L (3.94) ±0.1 B±0.1 Board edge 2.29± ±0.1 E±0.1 Two, 3.05±0.1 ±0.1 ± ±0.1 Board edge ±0.1 ±0.1 No. of B C D E Y 00Y 100Y.100Y 8.89±0.1 Fifteen, T Two, 3.05±0.1 dia. 2.29± ± ±0.1 ±0.1 ±0.1 dia. Fifteen, Y.C 0Y 0.100Y.COM.T.1 Y.COM.T. dia.
6 High-density D-sub Sockets with Straight DIP Terminals XM4L nchor 2 XM4Z Dimensions: Not Panel Mounted (Using nchor 2) 2-R3.2 XM4Z-0012 XM4Z-0013 min. 1.4 # UNC 1.4 # UNC 11.4 min..4 min. 4-R2.5 Note: 1. Two nchors are required per Connector. 2. pplicable panel thickness is less than 1.2 mm..t.100y..t O 0Y 00Y 100Y.100Y.T 0Y.C 0Y 0.100Y.COM.T.1 Y.COM.T dia XM4Z-0011 M2. 5 XM4Z XM4Z #4-40 UNC No. of 9 (See note.) Note: 1. The XM4K and XM4L use 9-contact dimensions nchor ±0.1 ±0.1 XM4Z-0021 M ± Dimensions: Panel Mounted (Using nchor 3 or M3 Screws) 2.2 XM4Z XM4Z-0023 ±0.1 B min #4-40 UNC XM4Z-0021 M XM4Z Two, dia XM4Z dia #4-40 UNC No. of B Two, 3.2±0.1 dia min. 9 (See note.) R Note: 1. Two nchors are required per Connector. Note: 1. The XM4K and 2. pplicable panel XM4L use 9- thickness is less than 1.2 contact mm. dimensions Connectors
7 XM2S Hood Covers Dimensions 9-contact Hoods XM2S-0911 (M2. x 5 metric screws) XM2S-0912 (M3 x 0.5 metric screws) XM2S-0913 ( inch screws) 15-, 25- and 37-contact Hoods XM2S-@@11 (M2. x 5 metric screws ) XM2S-@@12 (M3 x 0.5 metric screws ) XM2S-@@13 ( inch screws) Dimensions B C D E F Ordering Information 1048 Lock screw M2. x 5 metric screws M3 x 0.5 metric screws inch screws nchor 1 XM2Z-0001 XM2Z-0002 XM2Z-0003 pplicable nchor 2 XM2Z-0011 XM2Z-0012 XM2Z-0013 nchors nchor 3 XM2Z-0021 XM2Z-0022 XM2Z XM2S-0911 XM2S-0912 XM2S XM2S-1511 XM2S-1512 XM2S XM2S-2511 XM2S-2512 XM2S XM2S-3711 XM2S-3712 XM2S-3713 Note: Select D-sub Connectors with nchors or Grounding Fixtures that fit the lock screw of the Hood. ccessories (Sold Separately) nchor 5 (For Jackscrews and XM2S Hood) XM2Z-0071 (M2. 5 metric screws) XM2Z-0072 (M3 0.5 metric screws ) XM2Z-0073 ( inch screws) Materials and Finish Brass/nickel plated.t.100y..t O 0Y 00Y 100Y.100Y.T 0Y.C 0Y 0.100Y.COM.T.1 Y.COM.T. 4 dia. Lock screw M dia. Max. applicable diameter: 9 dia. Screw Lock screw M2. 5 Dimensions Max. applicable cable diameter: F dia. Model XM2Z-0071 M2. x 5 XM2Z-0072 M3 x 0.5 XM2Z-0073
8 .T M.T OM.10 COM.T OM..COM.T Y.COM.T.1 0Y.COM.T OM Precautions Correct Use Grounding (Lock Pin Grounding Fixture) To ground, provide copper foil around the Connector ttachment hole on the board, assemble the connector and grounding fixture, and dip in solder as shown below. Insert the connector into the PCB and then simultaneously dip-solder the connector terminals and lock pin to the board. 00Y Soldering utomated Soldering Conditions (Jet Flow) 1. Soldering temperature: 250 ±5 C 2. Continuous soldering time: ithin 5 s Lock pin grounding fixture PCB (t = 1. mm).100y.100y pprox. 1.9 Tightening Torque of nchor and Grounding Fixture.T If the anchor is secured to the connector, be sure to tighten it to a torque of 9 N m..t.100y.com.t OM M.T O Y. OM.100Y
9 Mouser Electronics uthorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: XM2S-1511 XM2S-2511 XM2S-1513
Without Indicator. With Indicator Model XM9B XM9B Contact Plating Specification 4: Gold Flash Plating
LAN Modular Jack Connectors XM9B Compact LAN Modular Jack Connectors Category 5e transmission performance met for 1, 2-3, 6 pairs. (Verified with connection to Omron XS5W-T421.) Models available with and
XC7. DIN Sequence Connectors. An improved DIN-standard Sequence. Connectors. connectors. Ratings and Characteristics. Materials and Finish
DIN Sequence Connectors XC7 An improved DIN-standard Sequence Connector ows power line to daughter board connection first and removal last. Used the same way as regular DIN connectors. Dimensions are those
XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
XH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
KH SERIES. Features. JK series area by 20% compared with our JK series subminiature connectors. 6.18
D SUBMINIATURE CONNECTOR Right angle through-hole socket K SERIES RIGT ANGE TROUG-OE SOCKET 01 (with hexagonal lock screw blocks) (without lock screw blocks, but with grounding adapters having a inch thread)
Right angle through-hole plug and socket. Features circuits 25-circuits 9-circuits 25-circuits
D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug and socket RIGT ANGE TROUG-OE PUG AND SOCKET 01 Right angle through-hole plug (with hexagonal lock ) Right angle through-hole socket (without
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
XW3B. Connector Terminal Boxes. Ratings and Specifications. Compatible Connectors. Materials and Finish
es XWB Series Includes New Lightweight, Low-profile Connector Terminal Boxes for Use Outside of Control Boxes to Centralize I/O with Reduced Labor and Greater Environmental Resistance Tough model with
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
JK SERIES. SUBMINIATURE CONNECTOR Crimp style plug and socket. Features. Standards. Specifications CRIMP STYLE PLUG AND SOCKET
D SUBMINIATURE CONNECTOR Crimp style plug and socket CRIMP STYLE PLUG AND SOCKET JK SERIES 01 Crimp style plug Crimp style socket Pin contact Socket contact Features The dimples in the shell provide the
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
ORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
USB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
AC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
USB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
J DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses Costs
ITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
XH5 SMT-compatible Connectors with a 1.27-mm Pitch
New Product Half-pitch SMT Connectors (oard to oard and oard to Cable Connectors) XH5 SMT-compatible Connectors with a -mm Pitch These SMT Connectors can be mounted on the back surfaces of circuit boards.
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
D-SUBMINIATURE (D-SUB) ECONOMY RANGE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE (D-SUB) OVERVIEW FCI s D-Subminiature (D-Sub) connectors are part of an industry standard for applications requiring robust and reliable connectors. These proven
Round Water-resistant Connectors (M12) XS2
Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant
MRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
Power Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
J DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses to obtain
Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
Universal MATE-N-LOK Headers for UMNL II Connectors
for UMNL II Connectors PC Board Vertical Pin Headers [6.5] Centerline spacing,, and 5 Circuit, In-Line Housing Nylon Flammability ating UL9V-0 Contacts Phosphor bronze Solder tail diameter.06 [1.57] elated
TX1/TX2/TX3 SERIES CONNECTORS
TX 1 to 3 Series connectors are two-piece PC connectors with 1.27mm (.050") contact spacing. They are designed for board-to-cable applications. Configurations include IDC sockets (TX1 and TX2) for flat
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
MUSB Series - Right Angle Termination, Single and Stacked 12-2 MIEEE-P1394 Series - Fire Wire Connector 12-5
Universal Serial Bus MUSB Series - Right Angle Termination, Single and Stacked 12-2 MIEEE-P1394 Series - Fire Wire Connector 12-5 MAXCONN, INC. - 2151 DEL FRANCO STREETo SAN JOSE, CALIFORNIA 95131-408-435-5050,,
XS2. Water- and Environmentresistive. Wiring and Maintenance Effort. Sensor I/O Connectors (M12) Construction (XS2G Soldering Plug Connector Assembly)
I/O (M) XS XS/XS /XW XS XN XWB XS XS Water- and Environmentresistive FA Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant rating. A wide
(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
PC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
Ultra-Small Surface Mount Coaxial Connectors mm Mated Height
All non- products have been discontinued, or will be discontinued soon. the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra-Small
Modular FLATPAQ. provided, and Elcon will provide samples, typically within one week.
Modular FLATPAQ Modular FLATPAQ connectors provide custom solutions to hot pluggable AC and DC power needs in a board-to-board format. By using off-the-shelf modular components, power and signal modules,
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
USB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
Ordering Information. Snap Action Switch V. Model Number Legend V General Purpose Snap Action Switch. Snap Action Switch V 121
Snap ction Switch V General Purpose Snap ction Switch Industry standard design with switching currents of 10 to 21 Widely used for applications where long life expectancy and high reliability is required.
Technical Information XF2 Connectors
Technical Information XF2 Precautions Correct Use ALL MODELS Operating Ensure that the FPC has been inserted correctly and not back to front. In the event that the FPC is inserted incorrectly with the
AMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS PCB D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE
2.5mm & 3.5mm AUDIO JACKS STEREO & MONO EARPHONE JACKS ASJ SERIES
.mm &.mm AUDIO JACKS INTRODUCTION: Adam Tech ASJ Series Stereo Jacks are a broad range of.mm and.mm jacks used primarily in computer and multi-media audio applications. This series provides a multitude
XS3. Small Round Water-resistive Connectors. Round Water-resistant Connectors (M8/S8) Pin Arrangement (Engaged Side)
Round Water-resistant Connectors (M8/S8) XS CSM_XS_DS_E Small Round Water-resistive Connectors Water-resistive, compact connector meets IP67 requirements. Conventional M8 screw-mounting models are available
USB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
PRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
Actuator Terminal Model
Sealed Snap ction Switch D2VW Watertight Miniature Snap ction Switch High-quality watertight, high-precision miniature Snap ction switch. Switch Body meets IP67 requirements Use of epoxy resin assures
AC SERIES - A TYPE THERMOPLASTIC XLR PCB CHASSIS CONNECTORS
AC SERIES - A TYPE THERMOPLASTIC XLR PCB CHASSIS CONNECTORS The AC series, A type XLR chassis receptacles have been designed and manufactured with the Original Equipment Manufacturers (OEM) needs in mind.
APPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
V.35 - Interface connectors
V.35 DTE/DCE Interface connectors Description The Telecommunications Standardization Sector TSS V.35, formerly CCITT V.35 is the international standard termed Data Transmission at 48 Kbps using 60-108
Interface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
Small Circular Connector. JN1/JN2 Series. Cap
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series CONNECTOR MB-0054-10 June 2012 Angle Plug [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof
QUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
Memory Stick Connectors
Memory Stick Connectors CB1 Series Card Push Insert/Push Eject Card ejection distance of 1 mm Mounting height of mm Mounting area: Smaller design is 78% of former size Outline Receptacle
USB Buccaneer BUCCANEER
Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling USB adaptor Sealing Cap Clip Standard USB O ring maintains IP68 seal at interface Panel gasket
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
COMPONENT SPECIFICATION. PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE
PC/104 AND PC/104 Plus CONNECTORS JANUARY 2013 CONTENTS: SECTION TITLE PAGE 1 Description of Connector and Intended Application 2 2 Marking of Connector and/or Package 2 3 Ratings 3 Appendix 1 Part Number
TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE
2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Inverted Thru Board Card Edge: BTB
AVX has developed the 1-Piece bottom entry card edge connector to allow a perpendicular PCB to be mated to a top mounted main FR4 or metal core PCB from the bottom side. The most popular application on
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
D2D. Door Interlock Switch. Ordering Information. Power Switch with Minimum Contact Gap of 3 mm. Model Number Legend.
Door Interlock Switch Power Switch with Minimum Contact Gap of 3 mm Offers the minimum contact gap of 3 mm required for power switches as standard equipment. Highly reliable design conforms to European
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
Round Water-resistant Connectors (M8) XS3
Round Water-resistant Connectors () XS Compact, Watertight, Round Connectors Water-resistive, compact connector meets IP67 requirements. Ideal for a wide variety of FA and OA applications. Using connectors
The con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
Key features: M5 Series. Buccaneer. Full Contact Diagrams Page 120
The most compact connector type in the MSeries range, Bulgin s waterproof M5 sensor connectors come in straight and angled forms with or overmolded cable option s and a variety of panel mount receptacles.
CF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
YOUR CONNECTION TO QUALITY AND SERVICE
YOUR CONNECTION TO QUALITY AND SERVICE EDAC - A WORLD-CLASS CONNECTOR COMPANY Since its formation over 30-years ago, EDAC Inc. has grown to become one of the world s leading manufacturers of card-edge,
Pin plunger D2JW-011 D2JW-011-MD. Short hinge lever D2JW-01K1A1 D2JW-01K1A1-MD. Hinge lever D2JW-01K11 D2JW-01K11-MD
Sealed Snap ction Switch DJW Immersion-Proof Subminiature Snap ction Switch Ultra-small and highly sealed Water-tight housing conforming to IEC IP67 Wide range of operating temperature from -40 to 85 C
1 XS3W-M R Robot cable
Round Water-resistant Connectors (M8/S8) XS Small Round Water-resistive Connectors Water-resistive, compact connector meets IP67 requirements. Conventional M8 screw-on models are available along with S8
SYSTEM CONNECTORS FOR W-CDMA
SYSTEM CONNECTORS COMPLINT WITH EIJ RC-5238 (CONNECTOR FOR IMT-2000 MOBILE PHONES) SYSTEM CONNECTORS FOR W-CDM Receptacle Signal 10 contacts with coaxial, with charging terminals ( type) Plug Signal 10
AC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
PC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
Modular Connectors 75
75 Plug/Jack Compliant to Enhanced Category 5 standards Connector type Size Series Name Page plug connectors compliant to enhanced category 5 standards 8 TM21P 77 jack connectors for high-speed LAN transmission
Elma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
0.5mm pitch stroke conforming to USB2.0 Standard. DD2 Series. [Plug] [Receptacle] [Cradle]
![0.5mm pitch stroke conforming to USB2.0 Standard. DD2 Series. [Plug] [Receptacle] [Cradle]](/thumbs/85/92267767.jpg "0.5mm pitch stroke conforming to USB2.0 Standard. DD2 Series. [Plug] [Receptacle] [Cradle]")
COMPONENTS PRODUCT INFORMATION NEW 0.5mm pitch stroke conforming to USB2.0 Standard DD2 Series CONNECTOR MB-0112-3 July 2007 RoHS Compliant [Plug] [Receptacle] [Cradle] The DD2 series of connectors are
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
EXTreme Guardian Power Connector System
Exceed high-current and reliability requirements in topend server and high-power applications with Molex s compact,, providing EMI/RFI shielding, overmolding and discretewire options for design flexibility
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
SN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page 1 of 15 CONTENTS CLAUSE PAGE 1.0 SCOPE..
HSSDC. HSSDC High Speed Serial Data Connection receptacles. HSSDC Receptacle. U45 - A APPLICATIONS ORDERING INFORMATION
HSSDC High Speed Serial Data Connection receptacles meet high-speed differential communication protocols with speeds exceeding 1 Gbps such as IEEE 802.3z and Fibre Channel. This system is designed to conform
Interface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
Excellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Weidmüller 1633770000 For any questions, you can email us directly:
RH1-ZZ Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange
To: Customer P/N: UDE P/N: Description: RJ45 Over USB 3.0 Through Hole 10/100/1000 Base-T Contact Area : Gold Flash LED:L-Green/Orange;R-Orange Spec No. RH116037-00 Update Date 2016/11/1 Revision A Approved
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
Component Product Information: MB-6062E mm staggered Contact Spacing, Double Rows Dec 97
Component Product Information: MB-6062E-2 1.25mm staggered Contact Spacing, Double Rows Dec 97 LCD Interface Connector, FI Series??? Connector GENERAL: This LCD Interface connector is designed to be used
AMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
Right angle press-fit D-Sub connectors
Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN
Industrial Ethernet Cables XS5/XS6
ADR ADR ADR XS5/XS Cables and Connectors for EtherCAT and Other Industrial Ethernet Networks CATa Ethernet patch cables For in-cabinet use LSZH with standard RJ5 plugs CAT5e Ethernet patch cables For out-of-cabinet