ECBT2.E Connectors for Use in Data, Signal, Control and Power Applications. Connectors for Use in Data, Signal, Control and Power Applications
|
|
- Beatrix George
- 5 years ago
- Views:
Transcription
1 Page 1 of 7 ECBT2.E60980 Connectors for Use in Data, Signal, Control and Power Applications Page Bottom Print-friendly version Questions? Previous Page Connectors for Use in Data, Signal, Control and Power Applications See General Information for Connectors for Use in Data, Signal, Control and Power Applications TYCO ELECTRONICS CORP 2100 PAXTON ST PO BOX 3608 HARRISBURG, PA USA E60980 Adaptor plugs, Series ACO, ARO, ASO. Back plane connectors, Cat. No. BC followed by 1, 2 or 3, followed by A or B, followed by 4 to 100 incl. Card edge connectors, Series C1-PF Series. Series C9. Series F5. Cat. Nos. 609-XX05M, -XX15M, -XX25M, -3415GI, -5015GI, -5015TH. Card edge low cost connectors, Cat. Nos. P , TB, , 636 Series. Chip carrier socket connectors, Cat. Nos. PCC-044T-01, -052T-01, -068T-01, -084T-01, -044TA-XX- X, -052TA-XX-X, -068TA-XX-X, -084TA-XX-X, Z Compliant contact headers, Series 609, 612. Component board expansion connectors, Cat. Nos. 609-BX360, -BX366, -BX440, -BX446. Component connectors, Cat. Nos , ,
2 Page 2 of 7 Cat. No X2-SN. Component connectors, Series S1000, Cat. Nos. S203, S10002, S10004, S10005, S10006, S10007, S10008, S10048, S Compression headers, Cat. No Connectors Series 625, ATA. Series , , , Cord connectorsvs Series, Style A (DIN configuration), Style B (DIN and Industrial configuration). D connectors, Cat Nos. R1F50PF29A2, -29B2, -29C2; Cat. Nos. I , , , I , I , , I12-25PM50G12, -37PM50G12, -1601, , , , , , , 609-*X when * denotes 9, 15, 25, 37, 50, 09, 015, 025, 037 and X denotes P, P-M, P-M1, P-M2, R, S, S-M, S-M1, S-M2 or nothing; Cat. Nos. 609-XXPM2A, - XXPM2M, -XXSM1A, -XXSM1M where XX denotes 9, 15, 25 or 37; Cat. Nos PG1, - 25P50G12, -25PMG1, -25S5G12, -25SG1, -25SMG1, -37P50G12, -37S50G12; Cat. No. 622-*X when asterisk denotes 09, 15, 25, 37, 50 and X denotes P, PM, PM1, PM2S, S, SM, SM1 or SM2. DIMM 168 PIN-ZIF socket series, Cat No XXXX-XX. DIN connectors, Series 16, Styles B, B/2, B/3, C, C/2, C/3; Series 21, Styles Q, Q/2, R, R/2; Series 22, Style M. Series 17, Type "D" Din Connector. Series 17, Styles D, E. Series 37, Styles H7/F24, H11, H15. Series 38, Styles F, G. DIN connectors, European version, Series FB, FC, FHB, FHC, FHQ, FHR, FQ, FR, MB, MC, MHB, MHC, MHQ, MHR, MQ, MR. DIN connectors, U.S. version, Series FB, FC, FHC, FJC, FR, FTB, FXR, MHR, MJR, MR, MXR. DINPCB connectors, Series FB, FC, FHB, FHC, FHQ, FHR, FQ, FR, FVC, MB, MC, MHB, MHC, MHQ, MHR, MQ, MR, MVC. DIP plug connectors, Low Profile, Cat. Nos. 609-M085H, -M085TH, -M145, -M145H, -M145TH, - M165, -M165H, -M165TH, -M185H, -M185TH, -M205H, -M205TH, -M225H, -M225TH, -M245H, - M245TH, -M407H, -M407TH, -M485H, -M485TH. Shims, Cat. Nos. 609-S14, -S16, -SM14, -SM16.
3 Page 3 of 7 Shrouds, Cat. Nos B, -161B. Shunts, Cat. No Standard, Cat. Nos. 609-M141, -M141H, -M161, -M161H. DIP socket connectors, Series SD-042-S6T, SD-064-S6T, SD028-S6T, SM0, SM1. Cat. Nos DS, -141DSM, -161DS, -161DSM. Series CDF20. D-Subminiature connector, Cat. No. D2M020ST27DS100. Series H2MRA, -MST, -RST, H4MRA, -MST, -RRA, -RST. D-Subminiature metal shell crimp/snap-in connector, Series HM/HR. Edge card connectors, Series A2, A4, A5, A6, A7, A8, A9, B3, B9. Series C2, C3, C4, C5, C6, C7, C8, W8. Series HDR Connectors. Cat. Nos , , Edge mount header connectors, Series S European interface connectors, Series I64. Cat. Nos , -641, -642 followed by -2 or -3. Extended density performance connector, XD/P Series, Cat. No Female socket transition connectors, Cat. Nos. A , A , KS23774, P , , , , , , , , , , , , , S201, SN9-1400M, -1600M, -1601M, -2000M, -2030, -2600M, -2601M, -3400M, -3430M, M, -6000M; Cat. Nos. 609-XX00CE, -XX01CE, -XX00M, -XX01M, -XX30, -XX30CE, -XX31P, -XX41, -XX41CE with or without suffixes G1, 50G, 50G12. Series 625. Series 636. Flex-pac polarized headers, Series FP, FPH. Flexstrip headers and sockets, Series FHK, FHN, FHT, FPH. Header/Sockets, Cat. Nos. AB , AB
4 Page 4 of 7 Jumper shunts connectors, Cat. Nos. TE5400-B, -N, -R. Keypad connector, Series S Low profile header connectors, Series S10053, 609, 612, 636, Cat. Nos. P , thru incl., , , T20, , T20, , T11, , T11, , , P , , thru incl. Low profile header (with compliant pins), Series 609. Low voltage connectors, Model XXMR Series followed by 03-30, followed by 2, followed by 0 or 1, followed by blank or W; Model FPC125-XX-X Series followed by followed by 0 or 1. Model X2-02. Male connectors, Cat. Nos. P , 609-XX66. Series 609. Male header, EH Series. Micro-header, Series Connector. PCB male headers, Cat. Nos. AP , AP , P , , A, , , , , , , R15, , R15, P , , , , , , , , P , , , ; Cat. No. 500-YYXX7X-X with or without suffixes. Series D Series P18, 500, 501, 609, 618. PCB solder transition connectors, Cat. Nos. 609-XX03, -XX23, -XX43, -XX53, -XX63, P Series 744-XX where XX denotes 05 thru 30 incl. PCI card edge connectors, Series PCI-097-X-XX, -109-X-XX, -115-X-XX, -303-X-XX. Pin-grid array screw machine socket, Series PGM. Pin-grid array socket connectors, Series GM, GMC, GR, GS, PGM. Series LPG, PGA. Series S10011.
5 Page 5 of 7 Pin-strip header connector, Series S1000. Post frame DIP socket, Series CMO. Cat. No. S Power/signal combination connectors, Cat. Nos. S10024, S10029, S10127, S10142, S10157, , , , , , , , , , , , , , , , , , , , , , , , , Receptacles, Cat. No. CRH followed by suffixes A thru F incl., D or S, K or M, followed by 01 thru 64 incl., 1 thru 4 incl., Cat. Nos. FM48W2, H11ffa-Co, H11ff4-Co, H11MW, H15ffA-Co, H15ff4-Co, H15fw, H15mfav32- Co, H15mgw-Co, H15mwv32-Co, MF24fa-7fa, 05H15fsr, 05H15mgwvz4+32/Co, 06Mm24w+6/1W. Ribbon connectors, Cat. Nos , -24+, -36+, -50+ where + denotes F, FA, M or MA, I , , I Right angle connectors, Series D3M. Series H2R. Series HS, H3M, H3R, H4R, H5M, H5R, H8R, H9R. Right angle D pin connector plug, Cat. No. 609 followed by 9, 15, 25 or 37, followed by PR, followed by 2 or 4. Right angle D socket connectors, Series HF, HFR, HFS, HHR. Cat. No. 609 followed by 9, 15, 25 or 37, followed by SR, followed by 2 or 4. Right angle receptacle, Series USB. Series 622 connectors, Card edge connectors, with mounting ears, Cat. No. 622-XX05; without mounting ears, Cat. Nos. SCA-2 Connectors, TxR Series 622-XX15, -XX15PK; with half mounting ears, Cat. Nos CE0305TB, CE0305TBL, CE2729TB, CE2729TBL, 622- XX15TB, 622-XX25, PK0305TB, PKUC, PKUC, PKUC; male connectors, without mounting ears, Cat. No. 622-XX06; with half mounting ears, Cat. No. 622-XX16; metal shell ribbon connectors, Cat. Nos. 622-XXFM, -XXFM1, -XXFM2, -XXFM3, -XXFAM, - XXMM, -XXMM1, -XXMM2, -XXMM3, -XXMAM; male headers, no ejector, Cat. No XX24; short ejector, Cat. No. 622-XX24E; long ejector, Cat. No. 622-XX24ES; right angled pins, with no ejector, Cat. No. 622-XX04; short ejector, Cat. No. 622-XX04E; long ejector, Cat. No. 622-XX04ES; female sockets, with strain relief, Cat. Nos. 622-XX01, -XX41; without strain relief, Cat. Nos XX00, -XX30; metal shell "D" connector, Cat. No * where * denotes P-M, P-MM, P-M2, P-M2, P-M2M, S-M, S-MM, S-M1, S-M1M; Cat. Nos. 622-XX0ILS, -XX4ILS where XX can be Shunt connector, Series
6 Page 6 of 7 Smart card connector series, Cat. No. SCC Socket connectors, Cat. Nos. 609-FXX1M, -FXX1M2. Socket header connectors, Cat. Nos. P , , -1488, -1498, -1678, -1688, Spindle connector, Cat. No Stacked DIP sockets, Cat. Nos. DDS-16, -18, -20, -24, -28; Cat. Nos. PDS-16, -18, -20, -24, -28 followed by -10 to -20 incl., with or without suffix A; Cat No Strain relief clamps, Cat. Nos. 609-M245S, -M407S. Surface attached module sockets, Series SAM, Cat. No. I Surface mount connectors, Cat. Nos. SMC2402, SM2V02. Surface mount device, Series S10018 Power Connector. Surface mount sockets, Series SMH. System 311Connector, Cat. No. 311 followed by-020 to -100 incl., followed by 072E or 302. Terminator assembly connectors, Series FP, MR, SF, SL; Cat. Nos. P , TRM-50-01, -02, - 050, -068, , , , Unshrouded header and socket connectors, Series PS. Series 609, 614. Zero insertion force connector, Series 14. * denotes 0 to 8 incl. XX denotes 00 to 80 incl. YY denotes 10 to 64 incl. Note: Any of the above catalog numbers may be provided with additional suffixes. Marking: Company name, type, series or catalog number, factory identification and Recognition Mark on smallest shipping carton. This information may be contained entirely on a single label that is typically provided on shipping cartons, or may be partially conveyed on a label and associated tube such that when the label is placed on the tube, all required information is shown. Last Updated on Page Top Notice of Disclaimer Questions? Previous Page UL Listed and Classified UL Recognized Products Certified for
7 Page 7 of 7 Products Components Canada This page and all contents are Copyright 2005 by Underwriters Laboratories Inc. The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL's Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL's Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a nonmisleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright 2005 Underwriters Laboratories Inc. "
CERTIFICATE OF COMPLIANCE
Certificate Number 20171030-E128128 Report Reference E128128-20171030 Issue Date 2017-OCTOBER-30 Issued to:, OSKALOOSA IA 52577 This is to certify that representative samples of COMPONENT - RECEPTACLES
More informationplate/lisext/1fram E/show p...
NRNT2.E168231 - Sw itches, Industrial C ontrol - C om ponent http://database.ul.com/cgi-bin/xyv/tem plate/lisext/1fram E/show p... ` 1 /1 2006-02-03 UL Online Certifications Directory Page Bottom NRNT2.E168231
More information1 of 8 28/12/11 1:15 PM
1 of 8 28/12/11 1:15 PM XHHW7.R14608 Fill, Void or Cavity Materials Certified for Canada Page Bottom Fill, Void or Cavity Materials Certified for Canada See General Information for Fill, Void or Cavity
More information.050" IDC Connectors for.025" Ribbon Cable - M73 Series
.050" IDC Connectors for.025" Ribbon Cable - M73 Series PRT NUMER LEGEND M73X-XXXX-XX STYLE 01 = Low profile.050" IDC Socket for single layer.025" Flat Cable 02 = Standard profile IDC Socket for single
More informationFCC17 Series FILTERED STACKED D-SUB CONNECTORS
FCC17 Series FILTERED STACKED D-SUB CONNECTORS Ordering Information Stacked D-Sub FCC17 2 BP BS 4 5 5 X FCC17 2 VERTICAL MOUNTING DIMENSION BETWEEN CONNECTORS 1 =.625" [15.88 mm] 2 =.750" [19.05 mm] BP
More informationMake sure that the MUTE button on your phone is depressed during the voice explanations.
If you are having trouble logging in, please call Carrie Tanke at (805) 522-7958 ext 432. Make sure that the MUTE button on your phone is depressed during the voice explanations. 1 Input / Output Rectangular
More informationAMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More informationConnector Systems for GPS Tracking, Positioning and Portable Navigation Devices (PND)
and Portable Navigation INTRODUCTION Molex offers a broad range of compact, high-density connectors that can be used for navigation, tracking and positioning. Each connector is packed with features designed
More informationC E R T I F I C A T E O F C O M P L I A N C E
C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20131213-E100527 Report Reference E100527-19890524 Issue Date 2013-DECEMBER-13 Issued to: VICOR CORP 25 FRONTAGE RD ANDOVER MA 01810 This
More informationSummary of shell housings and accessories Shell housing A Shell housing D EMC housing
Directory chapter 20 Page Summary of shell and accessories........................... 20.02 housing C.......................... 20.04 housing A................................................. 20.08 housing
More informationUL Online Certifications Directory
UL Online Certifications Directory OCD Home Quick Guide Contact Us UL.com RTRT.E13399 Receptacles for Plugs and Attachment Plugs Page Bottom Receptacles for Plugs and Attachment Plugs See General Information
More information343
.050" IDC CONNECTORS DUL ROW SOCKETs & Transition Plugs HFCS & HFDP SERIES Introduction: dam Tech.050" IDC Sockets and Transition Plugs are low profile, precision designed flat cable connectors that feature
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationQuick Reference Guide: Stacking Connectors
Quick Reference Guide: Stacking Things to consider when selecting a mezzanine connector 1. Determine a range of stack that will meet the application requirements. 2. Determine the minimum number of signals
More informationSUNNY YOUNG ENTERPRISE CO., LTD.
ENTERPRISE CO., LTD. www.sunnyyoung.com.tw E 193070 E 159613 COMPANY PROFILE Sunny Young Enterprise Co., Ltd., is a professional manufacturer of various connectors, cable assemblies and wire harnesses
More informationTechnical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
More informationOvervoltage Protection
Overvoltage Protection Weidmuller has a complete line of overvoltage protection devices to effectively stop the harmful effects of electrical overvoltage and electrical noise. There is strong potential
More informationC E R T I F I C A T E O F C O M P L I A N C E
Issued to: GE LIGHTING SOLUTIONS L L C BLDG 338E 1975 NOBLE RD EAST CLEVELAND OH 44112 This is to certify that representative samples of COMPONENT - SIGN ACCESSORIES See addendum pages Have been investigated
More informationFCC17 Series FILTERED D-SUB CONNECTORS
Specifications FCC17 Series Filter Characteristics: See Page 2 Electrical Data: See Page 2 Material and Finishes: See Page 3 Environmental Data: See Page 3 UL File # : E135615 CSA File # : LR68598 These
More informationCertificate of Compliance
Certificate of Compliance Certificate: 1895053 (LR 78160-11) Issued to: Kycon, Inc. 305 Digital Dr. Morgan Hill, CA 95037 USA Attention: Jill Scarnecchia The products listed below are eligible to bear
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors.00 x.00 [1.27 x 1.27] Centerline.00 x [1.27 x 2.4] Centerline AMPMODU 2mm Connectors x [2.4 x 2.4] Centerline.12 x.12 [3.18 x 3.18] Centerline.16
More informationLight & Sound Control Module
Light & Sound Control Module Operation and Installation Manual G-Scale Graphics 5860 Crooked Stick Dr. Windsor, CO 80550 970-581-3567 GScaleGraphics@comcast.net www.gscalegraphics.net Revision 55: C: Updated
More informationProlonged exposure to ultraviolet light may deteriorate the chemical composition used in the pc board jack connector material.
This specification covers the requirements for application of Terminal Block Stacking Connectors. The complete line consists of one piece side entry, angled entry, and top entry printed circuit (pc) board
More informationConnectors. product catalog no. 26
Connectors product catalog no. 26 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Product Groups Overview Explanation of Symbols Termination Application
More informationELECTRONICS. Connectors for Medical Devices
ELECTRONICS for Medical Devices CONNECTORS FOR MEDICAL APPLICATIONS Today s medical devices require increasing levels of functionality and flexibility. FCI brings its superior product performance and outstanding
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationQuick Selection Guide
Quick Selection Guide Signal Connectors M23 Coupling ayonet Coupling CONINVERS Edition 03/02 Signal Connectors M23 ayonet Quick Selection Guide Edition 03/02 Number of Contacts (View: mating face) Contact
More informationAMPMODU Interconnection System
AMPMODU Interconnection System PC/104 and PC/104- Plus Connectors x [1.7 x 1.7] x [1.7 x.54] AMPMODU mm Connectors x [.54 x.54].15 x.15 [3.18 x 3.18].156 [3.96] 1 3 4 5 6 7 Disclaimer While Tyco Electronics
More informationAMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS
AMP-LATCH RIBBON CABLE INTERCONNECT SOLUTIONS Quick Reference Guide AMP-LATCH connectors are ribbon cable-to-board devices used to make the transition between ribbon cable and pc board circuitry. They
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationExtract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership
Extract from new Device Connectivity catalogue HARTING har-flex People Power Partnership . har-flex CONNECTORS The continuous scalability by an even number of contacts, i.e. from 6 to 100, of the HARTING
More informationCW INDUSTRIES IDC SELECTION GUIDE
CW INDUSTRIES IDC SELECTION GUIDE An ISO Company that Delivers World Class Quality About CW IDC Connectors CW mass terminated Insulation Displacement Connectors are specifically designed to provide a reliable
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationM-Line Series MN Multi-Pin Plugs and Receptacles Vac, Vdc
Applications Designed for the roughest industrial applications, providing reliable, rugged service for power, control and instrumentation. For use in the roughest industrial applications, ranging from:
More informationCONNECTORS & RECEPTACLES
STRAIGHT CORD PLUG with Extended Barrel TYPE 12BL6M TYPICAL Male plug with ground key-rib. Nickel-plated diecast handle. Contact friction coupling. Flexible black strain relief. Heavy duty cable clamp.
More informationCatalog Revised Ribbon Cable Interconnect Solutions. Ribbon Cable Interconnect Solutions
Catalog 82012 Revised 10-09 Ribbon Cable Interconnect Solutions onents.com Ribbon Cable Interconnect Solutions Ribbon Cable Connector Selection Guide Ribbon Cable Connector Selection Guide Mates to.050"
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More informationINTERCONNECT SOLUTIONS
INTERCONNECT SOLUTIONS Products Overview Connect with Us... Experience Makes the Difference Who We Are We have been designing and manufacturing interconnect products for over 40 years. Today we supply
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More informationC E R T I F I C A T E O F C O M P L I A N C E
C E R T I F I C A T E O F C O M P L I A N C E Certificate Number 20140327-E181848 Report Reference E181848-19960718 Issue Date 2014-MARCH-27 Issued to: VICOR CORP 25 FRONTAGE RD ANDOVER MA 01810 This is
More informationHirose s Small Interface Connectors
ITS-P-03010Q-.1 (Page 1 of 18) Hirose s Small Interface Connectors ITS-P-03010Q-.1 (Page 2 of 18) Agenda 1. ST Series (10, 18, 24, 36 pos.) 2. MQ203 Series (Pad / compression type) 3. 3200 Series (8, 10,
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
More informationHirose Micro-USB Connectors and C07
Page 1 of 28 Hirose Micro-USB Connectors and C07 Page 2 of 28 What is Micro-USB? Several connector suppliers including Hirose submitted new connector designs to the USB meeting upon request from mobile
More informationFLAT FLEXIBLE CABLE (FFC) CONNECTORS
FLAT FLEXIBLE CABLE (FFC) CONNECTORS TE Connectivity s (TE) family of FFC connectors includes a variety of high density cable-to-board and cable-to-cable connectors designed for automated assembly. The
More informationAPPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationRS-232 to Logic Level Adapter with DB9M Connector and Power LED
PCB-CB-232M RS-232 to Logic Level Adapter with DB9M Connector and Power LED Part Number: PCB-CB-232M (unpopulated PCB, no parts) Features RS-232 to logic level adapter with DB9M connector (DTE style) and
More informationTE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE
More informationRECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
More informationProduct Details
My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My Account Innovation
More informationSRI-02 Speech Recognition Interface
SRI-02 Speech Recognition Interface Data & Construction Booklet The Speech Recognition Interface SRI-02 allows one to use the SR-07 Speech Recognition Circuit to create speech controlled electrical devices.
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More informationAPPLICATION SPECIFICATION. 1 of 22 B Millipacs HM 5 and 8 Row Right Angle Signal Receptacles Millipacs HM Right Angle Headers
1 of 22 B Millipacs HM 5 & 8 Row Receptacle & Right Angle Header Application Specification MPACS 5R RA RCP MPACS 8R RA RCP MPACS 5R RA HDR TABLE OF CONTENTS 2 of 22 B 1. OBJECTIVE...3 2. SCOPE...3 3. GENERAL...3
More informationFile E28476 Project 01ME June 27, 2001 REPORT COMPONENT - CONNECTORS FOR USE IN DATA, SIGNAL, CONTROL AND POWER APPLICATIONS
File E28476 Project 01ME05381 June 27, 2001 REPORT On COMPONENT - CONNECTORS FOR USE IN DATA, SIGNAL, CONTROL AND POWER APPLICATIONS Tyco Electronics Corp., Harrisburg, PA Copyright 2001 Underwriters Laboratories
More informationHigh-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
More informationVMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
More informationMillipacs 2mm Hard Metric Connector Selector Guide
Millipacs 2mm Hard Metric Connector Selector Guide Millipacs product family offers 2mm modular Boardto-Board and Cable-to-Board backplane connector solutions. Millipacs product range include low speed
More informationInstallation Instructions
Installation Instructions (Cat. No. 1794-TBN) 6 1 5 9 4 2 3 10 6 7 8 Component Identification 1 Female flexbus connector 2 Terminal base unit (1794-TBN) 3 Male flexbus connector 4 Keyswitch Set to the
More informationConnectors DIN 41612/IEC
Connectors DIN 41612/IEC 60603-2 and completions ERNI-electronic components quality assessed according to CECC 75101-801 2 www.erni.com/contact/ General information The DIN 41612/IEC 60603-2 connector
More informationFLEX Ex Spring Clamp Terminal Base
Installation Instructions FLEX Ex Spring Clamp Terminal Base (Cat. No. 1797-TB3S) 1 10 11 4 Only remove this cover plug if connecting another terminal base unit. 3 5 6 12 2 7 8 9 41253 Component Identification
More informationMinitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation
Minitek Pwr 3.0/Minitek Pwr 4.2 Customer Presentation Apr 2014 FCI Minitek Pwr 4.2 and 3.0 Overview Communication 2 Typical Server Storage Application Need Signal and Power pin to control and drive HDD
More informationProduct Portfolio Overview
Car Electronics KEEPING CONNECTIONS SIMPLE Smart Building Industrial Communications and Data Product Portfolio Overview R&D Sites & Manufacturing Footprint Solution To Fulfill Essential Needs Of Our Customers
More informationEPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
More informationSN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
More informationV.5/17. Connectors. product overview. Edition 5
V.5/17 Connectors product overview Edition 5 Editorial Good connections bear a name: ept Thomas Bernhard Claus Guglhör Guglhör Guglhör ept designs, produces and distributes electronic connectors for highquality
More informationHigh-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationMULTI CONNECTION SYSTEM Product Overview
MULTI CONNECTION SYSTEM Product Overview MCS MULTI CONNECTION SYSTEM Product Overview Sorted by Pin Spacing 2.5 mm MICRO* mm, 3.81 mm MINI 100% Mismating Protection mm MINI HD* mm MINI SL screw 714 Series
More informationAMCX.S CENTRAL-STATION ALARM UNITS
Page 1 of 8 AMCX.S4019 - CENTRAL-STATION ALARM UNITS Central-station Alarm Units See General Information for Central-station Alarm Units DIGITAL SECURITY CONTROLS, DIV OF TYCO SAFETY PRODUCTS CANADA LTD
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More informationThis front connection is composed of: 1. Right Angle Male Connector 2. Cable Connector Female
This specification covers the requirements for the application of Z PACK 2 mm HM Interconnection System for Board to Board Connections and provides information on the standard modules (Types A, B, C, A/B,
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page 1 of 15 CONTENTS CLAUSE PAGE 1.0 SCOPE..
More informationDX SERIES HIGH-DENSITY I/O CONNECTORS
General DX SERIES HIGH-DENSITY I/O CONNECTORS DX series high-density I/O connectors with bellow contacts are perfect for tomorrow's miniaturized electronic devices. This new 1.27mm (0.050'') interconnect
More informationCONTA-ELECTRONICS. Interface modules
CONTA-ELECTRONICS allow for a passive mechanical-electrical implementation of standard connectors onto screw or tension-spring PCB terminals. The individual signals of the multi-pole or high-pole connectors
More informationM ICROSTAR LABORATORIES TM
M ICROSTAR LABORATORIES TM 2265 116th Avenue N.E., Bellevue, WA 98004 Sales & Customer Support: (206) 453-2345 Finance & Administration: (206) 453-9489 Fax: (206) 453-3199 World Wide Web: http://www.mstarlabs.com/
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationWhy Use Filters of Filtered Connectors? Flex Filter Inserts. Filtered Military Circular Connectors. Filtered D-Subminiature and Micro-D Connectors
Why Use Filters of Filtered onnectors? Simple cost effective solution to help meet EMI/RFI compatibility requirements Best location for filtering is at the interface, which means inside the connector Easy
More informationTermination End. Figure 1
AMP- LATCH* Application Specification Universal Headers 114-40020 with ACTION PIN* Contacts 19 DEC 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationIDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
More informationHirose Circular Connectors
Hirose Circular Connectors Types, Applications, Competition HRS WebEx training 6/22/2004 1 Why use Hirose Circular Connectors? Broad range of types and mounting styles Unique and user-friendly designs
More informationSEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
More informationThe con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
More informationcpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies
cpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies IEEE 1101.10 and PICMG 2.0 Compliant Compact size and unique aesthetics Innovative positive locking, simple push button
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2014-11-25 Page 1 of 22 Report Reference # E186249-A273-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: UL 60950-1, 2nd Edition, 2014-10-14 (Information Technology
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More information5000 Sc. Cleaning Solution Generator Parts Manual. North America / International. DM20008 Rev. 02 (6-2012) *DM20001*
5000 Sc Cleaning Solution Generator Parts Manual North America / International www.tennantco.com DM20008 Rev. 02 (-202) *DM2000* A B Ref Part No. Serial Number Description Qty. 828 (000000- ) Bracket Wldt,
More informationRIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
More informationDirectory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
More informationThe Best Relaytion. Cradle Relay Accessories Rev. B EC-JM ECOC: JM10 1. Aug. 04
The Best Relaytion Cradle Relay Accessories 108-98016 Rev. B EC-JM00-0009-03 ECOC: JM10 1. Aug. 04 Sockets with hand solder terminals Sockets with PCB terminals Approx. weight 3.5 g Approx. weight 4.5
More informationMTA-156 IDC Quad Connectors
MT-156 IDC Quad Connectors MT-156 Product Facts Provides four points of contact Greater current carrying capability than Standard MT-156 Connectors Connector styles include both closed end and feedthru
More information2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationIDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2013-09-26 Page 1 of 16 Report Reference # E122103-A139-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: UL 60950-1, 2nd Edition, 2011-12-19 (Information Technology
More informationMA1 Midi Analyzer M Series Module ELM Video Technology, Inc.
MA1 Midi Analyzer M Series Module ELM Video, Inc. Page 1 Table Of Contents Important Safeguards... 2 Product Overview... 3 Decode Mode... 3 Hex Mode... 3 Switch & Connection Overview... 4 Installation...
More informationApplications
Han PCB adapter Contents Page Technical characteristics PCB adapter for Han DD... 20.02 Han DD Inserts with PCB adapter... 20.03 Technical characteristics PCB adapter for Han E... 20.04 Han E Inserts with
More informationPosi-Lok Plugs and Panels
THE SAFEST ELECTRICAL SYSTEM FOR HIGH AMPERAGE CONNECTIONS, POSI-LOK IS PART OF THE CAM-LOK FAMILY OF CONNECTORS. THE GROUND ALWAYS MAKES FIRST AND BREAKS LAST ALL POSI-LOK SYSTEMS ARE UL LISTED AND CSA
More information