NEX-P6960M. P6960 to Mictor Adapter. General Description
|
|
|
- Ruth Mosley
- 5 years ago
- Views:
Transcription
1 P6960 to Mictor Adapter NEX-P6960M Designed for the customer that needs to convert from a P6960 foot print connection on their System Under Test to a Mictor-type Logic Analyzer connection General Description The NEX-P6960M is an interface adapter used when the System Under Test contains the P6960 style D- Max connections and the customer needs to use Tektronix Mictor probes. This adapter interfaces the two probe types. The NEX-P6960M adapters are not static sensitive Adapter signal lengths are matched to 0.25 Cautions To ensure acceptable performance the customer must take into consideration the extra stub length added by this adapter in their simulations Existing Address and Data Mictor channel assignments do not map directly to the Mictor TLA inputs. A microprocessor or bus support package, designed for P6960 connectors, may need to be recompiled to use these adapters. Refer to Table 1 for a TLA input cross-reference list between the P6960 and Mictor connectors on this adaptor.
2 Connection to the System Under Test The P6960 end of the adapter (the end that connects to the system under test) is not keyed for correct alignment. For correct connection to the system under test the P6960 end of the NEXUS adapter must be connected to the system under test by matching the black screw to the black tie down, and the silver screw to the silver tie down. Channel mapping on the NEXUS adapter between the P6960 and Mictor connectors are contained in Table 1. This table is only applicable to 102- and 136-channel Logic Analyzer Modules. Table 2 shows the pinout for 68-channel modules. Mictor AMP/Tyco Pin # A D C E P6960 Pin # A/D High A/D Low C 5 CLK:0 Q0 CLK:3 Q3 A7 CLK:0 CLK:1 CLK:3 Q3 7 A3:7 D3:7 C3:7 E3:7 A14 A3:7 A1:7 C3:7 E3:7 9 A3:6 D3:6 C3:6 E3:6 A13 A3:6 A1:6 C3:6 E3:6 11 A3:5 D3:5 C3:5 E3:5 B12 A3:5 A1:5 C3:5 E3:5 13 A3:4 D3:4 C3:4 E3:4 B11 A3:4 A1:4 C3:4 E3:4 15 A3:3 D3:3 C3:3 E3:3 A11 A3:3 A1:3 C3:3 E3:3 17 A3:2 D3:2 C3:2 E3:2 A10 A3:2 A1:2 C3:2 E3:2 19 A3:1 D3:1 C3:1 E3:1 B9 A3:1 A1:1 C3:1 E3:1 21 A3:0 D3:0 C3:0 E3:0 B8 A3:0 A1:0 C3:0 E3:0 23 A2:7 D2:7 C2:7 E2:7 B6 A2:7 A0:7 C2:7 E2:7 25 A2:6 D2:6 C2:6 E2:6 B5 A2:6 A0:6 C2:6 E2:6 27 A2:5 D2:5 C2:5 E2:5 A5 A2:5 A0:5 C2:5 E2:5 29 A2:4 D2:4 C2:4 E2:4 A4 A2:4 A0:4 C2:4 E2:4 31 A2:3 D2:3 C2:3 E2:3 B3 A2:3 A0:3 C2:3 E2:3 33 A2:2 D2:2 C2:2 E2:2 B2 A2:2 A0:2 C2:2 E2:2 35 A2:1 D2:1 C2:1 E2:1 A2 A2:1 A0:1 C2:1 E2:1 37 A2:0 D2:0 C2:0 E2:0 A1 A2:0 A0:0 C2:0 E2:0 6 CLK:1 CLK:2 Q1 Q2 B21 Q0 CLK:2 Q1 Q2 8 A1:7 D1:7 C1:7 E1:7 B14 D3:7 D1:7 C1:7 E1:7 10 A1:6 D1:6 C1:6 E1:6 B15 D3:6 D1:6 C1:6 E1:6 12 A1:5 D1:5 C1:5 E1:5 A16 D3:5 D1:5 C1:5 E1:5 14 A1:4 D1:4 C1:4 E1:4 A17 D3:4 D1:4 C1:4 E1:4 16 A1:3 D1:3 C1:3 E1:3 B17 D3:3 D1:3 C1:3 E1:3 18 A1:2 D1:2 C1:2 E1:2 B18 D3:2 D1:2 C1:2 E1:2 20 A1:1 D1:1 C1:1 E1:1 A19 D3:1 D1:1 C1:1 E1:1 22 A1:0 D1:0 C1:0 E1:0 A20 D3:0 D1:0 C1:0 E1:0 24 A0:7 D0:7 C0:7 E0:7 A22 D2:7 D0:7 C0:7 E0:7 26 A0:6 D0:6 C0:6 E0:6 A23 D2:6 D0:6 C0:6 E0:6 28 A0:5 D0:5 C0:5 E0:5 B23 D2:5 D0:5 C0:5 E0:5 30 A0:4 D0:4 C0:4 E0:4 B24 D2:4 D0:4 C0:4 E0:4 32 A0:3 D0:3 C0:3 E0:3 A25 D2:3 D0:3 C0:3 E0:3 34 A0:2 D0:2 C0:2 E0:2 A26 D2:2 D0:2 C0:2 E0:2 36 A0:1 D0:1 C0:1 E0:1 B26 D2:1 D0:1 C0:1 E0:1 38 A0:0 D0:0 C0:0 E0:0 B27 D2:0 D0:0 C0:0 E0:0 Table 1: TLA Input Cross-Reference List 102-/136-channel cards E
3 Mictor AMP/Tyco Pin # A C P6960 Pin # A/D High C 5 CLK:0 CLK:3 A7 CLK:1 CLK:3 7 A3:7 C3:7 A14 A1:7 C3:7 9 A3:6 C3:6 A13 A1:6 C3:6 11 A3:5 C3:5 B12 A1:5 C3:5 13 A3:4 C3:4 B11 A1:4 C3:4 15 A3:3 C3:3 A11 A1:3 C3:3 17 A3:2 C3:2 A10 A1:2 C3:2 19 A3:1 C3:1 B9 A1:1 C3:1 21 A3:0 C3:0 B8 A1:0 C3:0 23 A2:7 C2:7 B6 A0:7 C2:7 25 A2:6 C2:6 B5 A0:6 C2:6 27 A2:5 C2:5 A5 A0:5 C2:5 29 A2:4 C2:4 A4 A0:4 C2:4 31 A2:3 C2:3 B3 A0:3 C2:3 33 A2:2 C2:2 B2 A0:2 C2:2 35 A2:1 C2:1 A2 A0:1 C2:1 37 A2:0 C2:0 A1 A0:0 C2:0 6 CLK:1 Q1 B21 CLK:2 Q1 8 A1:7 C1:7 B14 D1:7 C1:7 10 A1:6 C1:6 B15 D1:6 C1:6 12 A1:5 C1:5 A16 D1:5 C1:5 14 A1:4 C1:4 A17 D1:4 C1:4 16 A1:3 C1:3 B17 D1:3 C1:3 18 A1:2 C1:2 B18 D1:2 C1:2 20 A1:1 C1:1 A19 D1:1 C1:1 22 A1:0 C1:0 A20 D1:0 C1:0 24 A0:7 C0:7 A22 D0:7 C0:7 26 A0:6 C0:6 A23 D0:6 C0:6 28 A0:5 C0:5 B23 D0:5 C0:5 30 A0:4 C0:4 B24 D0:4 C0:4 32 A0:3 C0:3 A25 D0:3 C0:3 34 A0:2 C0:2 A26 D0:2 C0:2 36 A0:1 C0:1 B26 D0:1 C0:1 38 A0:0 C0:0 B27 D0:0 C0:0 Table 2: TLA Input Cross-Reference List 68-channel cards
4 Silkscreen Front for NEX-P6960M Amp/Tyco P/N accepts P6434 probe
5 Silkscreen Back for NEX-P6960M
6 Mechanical Specification for NEX-P6960M Keep Out Volume: Bottom keep out is the same as the P Height from the circuit board to the top of the retention screws is 1.512, width is There is approximately two inches of coax between the P6960 probe tip and the Mictor connector board. Product above is a Tektronix P6960. Drawing taken from Tektronix data sheet.
7 Mechanical of Mictor interface board Equivalent Circuit
8 Ordering / Contact Information Please see the website or contact us for complete solutions. Part Number NEX-P6960M Interface between P6960 connections on SUT and Logic Analyzer Mictor probes Postal: Nexus Technology, Inc. 78 Northeastern Blvd. #2 Nashua, NH Telephone: Fax: support@nexustechnology.com quotes@nexustechnology.com techsupport@nexustechnology.com Website: Placing an Order Credit Card orders can be placed directly at Purchase orders can be faxed to Nexus Technology, Inc. reserves the right to make changes in design or specification at any time without notice. Nexus Technology, Inc. does not assume responsibility for use of any circuitry described. All trademarks are the property of their respective owners.
NEX-DDR. 184-pin, 2.5V Double Data Rate (DDR) Bus Analysis Probe & Software
NEX-DDR 184-pin, 2.5V Double Data Rate (DDR) Bus Analysis Probe & Software Quick and easy connection between the DDR bus and a Tektronix Logic Analyzer Extender design does not require a dedicated slot
NEX-DDR266RWM. 184-pin, 2.5V Double Data Rate (DDR) Bus Analysis Probe & Software
NEX-DDR266RWM 184-pin, 2.5V Double Data Rate (DDR) Bus Analysis Probe & Software Mirrored design of NEX-DDR266RW product that provides the ability to simultaneously monitor two DDR sockets in a target.
NEX-DDRHSM. DDR 400MHz Bus Analysis Probe and Software
DDR 400MHz Bus Analysis Probe and Software NEX-DDRHSM Mirrored design of NEX-DDRHS product that provides the ability to simultaneously monitor two DDR sockets in a target Acquisition of DDR400/333/266/200,
Mirrored DDRHS Support
NEX-DDRHS 184-pin, 2.5V Double Data Rate (DDR) Bus Analysis Probe & Software Acquisition of DDR400/333/266/200 Address/Command, Read and Write Data Quick and easy connection between the DDR bus and a Tektronix
NEX-SODIMMDDRII533. SODIMM DDRII 533MT/s Bus Analysis Probe and Software
NEX-SODIMMDDRII533 SODIMM DDRII 533MT/s Bus Analysis Probe and Software Rigid/Flex/Rigid interposer design provides mechanical clearance for use in standard DDR2 SDRAM SODIMM targets Acquisition of DDR2-533MT/s
DDR SODIMM Slot Interposer Flexible SODIMM Digital Validation
DDR3-2133 SODIMM Slot Interposer Flexible SODIMM Digital Validation High Speed DDR3 Digital Validation Passive 204-pin SODIMM Slot Interposer Acquisition Up to DDR3-2133+ Passive 50% Module Reduction w/mr
DDR bit SODIMM Slot Interposer w/ecc Flexible SODIMM Digital Validation
DDR3-1867 72-bit SODIMM Slot Interposer w/ecc Flexible SODIMM Digital Validation High Speed DDR3 Digital Validation Passive 204-pin 72-bit SODIMM Slot Interposer Acquisition Up to DDR3-1867+ Passive 50%
Serial RapidIO Gen2 Protocol Analyzer
Serial RapidIO Gen2 Protocol Analyzer Serial RapidIO Protocol Analyzer & Pattern Injector Supports Serial RapidIO Gen2 or Gen 1 Descrambling & scrambling supported Tight integration and easy setup with
Using the SODIMMDDRII667/800 NEXVu product a step by step overview with Signal Integrity Display
Applications Note Using the SODIMMDDRII667/800 NEXVu product a step by step overview with Signal Integrity Display Introduction The SODIMMDDRIINEXVu667/800 is an instrumented NEXVu SODIMM that provides
Tektronix Logic Analyzer Probes P5900 Series Datasheet
Tektronix Logic Analyzer Probes P5900 Series Datasheet Applications Digital hardware validation and debug Monitoring, measurement, and optimization of digital hardware performance Embedded software integration,
DPhy Preprocessor MIPI 1.5Gb/s Protocol Analyzer Hardware DataSheet & User Manual. February Rev 1.2
DPhy Preprocessor MIPI 1.5Gb/s Protocol Analyzer Hardware DataSheet & User Manual February 2012 - Rev 1.2 1 MIPI DPhy Preprocessor 1.0 General: The MIPI DPhy Preprocessor (DPhyPre) is the hardware probe
DDR3 Mini DIMM Slot Interposer
DDR3 Mini DIMM Slot Interposer DDR3-1600 Mini DIMM Digital Validation High Speed DDR3 Digital Validation Passive 244-pin Mini DIMM Slot Interposer Compatible with Agilent Software Applications Acquisition
for Summit Analyzers Installation and Usage Manual
Protocol Solutions Group PCI Express 2.0 Mid-Bus Probe for Summit Analyzers Installation and Usage Manual Manual Version 1.1 Generated on: 2/7/2018 6:25 PM Document Disclaimer The information contained
Ag Leader Technology Insight. Direct Command Installation Spra-Coupe 7000 Series
Note: Indented items indicate parts included in an assembly listed above. Part Name / Description Part Number Quantity Direct Command Spra-Coupe 7000 Kit 4100531 1 Liquid Product Control Module 4000394
DDR3 DIMM Slot Interposer
DDR3 DIMM Slot Interposer DDR3 1867 Digital Validation High Speed DDR3 Digital Validation Passive 240 pin DIMM Slot Interposer Custom Designed for Agilent Logic Analyzers Compatible with Agilent Software
DDR Support for Tektronix TLA Logic Analyzers
DDR Support for Tektronix TLA Logic Analyzers What is DDR? DDR stands for Double Data Rate SDRAM. It is the follow-on to conventional PC100 / PC133 SDRAM. The biggest difference is that data is clocked
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
AVA AT-to-SCSI Host Adapter. Installation Guide
R AVA-1505 AT-to-SCSI Host Adapter Installation Guide 1 Getting Started This guide tells you how to install and configure the AVA -1505 AT -to-scsi host adapter. Installation instructions are given in
Raven Adapter Harness
Note: Indented items indicate parts included in an assembly listed above Quantity by System Part Name/Description Part Number With Switch Box With Built-in Switches Raven Harness Adapter Kit 4100504 1
DPhy Decoder MIPI 1.5Gb/s Protocol Decoder Hardware DataSheet & User Manual. March Rev 1.0
DPhy Decoder MIPI 1.5Gb/s Protocol Decoder Hardware DataSheet & User Manual March 2013 - Rev 1.0 1 MIPI DPhy Decoder 1.0 General: The MIPI DPhy Decoder (DPhyDkd) is the hardware probe that supports protocol
P375 Data Sheet & Applications Notes. PG3A Pattern Generator P375 Variable Universal probe April Rev 1.0
P375 Data Sheet & Applications Notes PG3A Pattern Generator P375 Variable Universal probe April 2008 - Rev 1.0 PG3A Pattern Generator P375 Variable Universal probe 1.0 General: The P375 probe is a variable
InSight Single Implement
Note: Indented items indicate parts Included in an assembly listed above Part name/description Part Number Quantity DirectCommand 4100544 1 Cable Install Kit 2000901-1 1 Module Mounting Plate Kit 2001358
DDR Detective Probing
DDR Detective Probing For use with the FS2800 DDR Detective DIMM and SODIMM Midbus Footprint Flying Lead BGA interposer DDR4 LPDDR4 DDR3 LPDDR3 All 4 technologies DDR3, DDR4, LPDDR3 and LPDDR4 in one box
Installation Manual AIS 240B-35
Installation Manual AIS 240B-35 SANDIA aerospace 3700 Osuna Rd NE, Ste 711 Albuquerque, NM 87109 www.sandia.aero 306464 This document and the information contained herein is the proprietary data of SANDIA
DYNAMIC ENGINEERING 150 DuBois St. Suite 3, Santa Cruz Ca Fax Est
DYNAMIC ENGINEERING 150 DuBois St. Suite 3, Santa Cruz Ca. 95060 831-457-8891 Fax 831-457-4793 sales@dyneng.com www.dyneng.com Est. 1988 User Manual CPCI-J2-SCSI CPCI User IO for 3U J2 SCSI connector Rear
DesignCon 2005 Track 5: Chip and Board Interconnect Design (5-TA2)
DesignCon 2005 Track 5: Chip and Board Interconnect Design (5-TA2) Connector-Less Probing: Electrical and Mechanical Advantages Authors/Presenters: Brock LaMeres, Agilent Technologies Brent Holcombe, Agilent
DYNAMIC ENGINEERING. 150 DuBois St. #3, Santa Cruz Ca Fax Est
DYNAMIC ENGINEERING 150 DuBois St. #3, Santa Cruz Ca. 95060 831-457-8891 Fax 831-457-4793 sales@dyneng.com www.dyneng.com Est. 1988 User Manual PC104p2PMC Alternate Name: PCI1042PMC Adapt a 32 bit PMC
DESIGN SPECIFICATION # R1 Model AHRS-500 P/N ARINC 407 TO ARINC 429 ADAPTOR CTRL # /17/96
DESIGN SPECIFICATION # 550-2000-R1 Model AHRS-500 P/N 550-2000 ARINC 407 TO ARINC 429 ADAPTOR CTRL # 96060006 10/17/96 Skylight Avionics 38629 6th Street East Palmdale, California (661) 265-0497 INDEX
Maxim Integrated Products 1
19-3093; Rev 0; 12/03 MAX3942 Evaluation Kit General Description The MAX3942 evaluation kit (EV kit) is an assembled demonstration board that provides electrical evaluation of the MAX3942 10.7Gbps modulator
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
Ethernet Adapter Installation Instructions
Ethernet Adapter Installation Instructions DOC. #569040000 A 7/30/04 PRINTED IN U.S.A. Disclaimer Logic One is a registered trademark of Novar Controls Corporation. The material in this manual is for information
Installation Manual AIS 200B-35
Installation Manual AIS 200B-35 SANDIA aerospace 3700 Osuna Rd NE, Ste 711 Albuquerque, NM 87109 www.sandia.aero 306463 This document and the information contained herein is the proprietary data of SANDIA
Magnetic probe holders are fully adjustable for more DUT heights and probe styles
Data Sheet The W4.0 x L6.5 mini probe station is a manual probe station designed for a versatile and comfortable operation on up to 4.0 wafers or 4.0 x 6.5 printed circuit board assemblies. This mini probe
MODELS PD230 AND PD1230 Installation Instructions
PNEUMERCATOR Liquid Level Control Systems MODELS PD20 AND PD20 Installation Instructions Model PD20 x2 Channel Lightning Surge Protector Model PD20 x2 Channel Lightning Surge Protector COPYRIGHT 2007 PNEUMERCATOR
2. Site Planning lists the prerequisites and physical requirements for installing the 289H M LSS monitor.
289H M LSS Installation & Operations Manual Overview Section 1 INTRODUCTION This manual provides procedures for installing and operating the 289H M Loop Surveillance System (LSS) monitor. It addresses
Upgrade Kit for the 4300 Remote BAC About This Document Using This Document Note Caution Inspecting Shipment
Upgrade Kit for the 4300 Remote BAC Feature Number 4300-F1-100 Installation Instructions Document Number 4300-A2-GZ41-00 July 2004 About This Document This document describes the installation of the DSL/POTS
CLINCHER FLEX CONNECTORS OVERVIEW TARGET MARKETS / APPLICATIONS FEATURES & BENEFITS
FLEX CONNECTORS CLINCHER Connector System for Flexible Circuitry (0.100in./ 2.54mm pitch) Maximum reliability; Low applied cost OVERVIEW The CLINCHER connector family includes single-row pin and receptacle
MS-5000: MiniStar Reader
The MS-5000 MiniStar Reader The MS-5000 MiniStar Reader is intended for installation in a single gang electrical "J-Box," in proximity applications where an unobtrusive reader is required. It can also
Probing Solutions for Logic Analyzers
Probing Solutions for Logic Analyzers Catalog Create a Quality Connection to Your Target System To make sure you have the tools for dependable state and timing measurements, no matter what mix of chip
Series 062 Bus Bar Connectors
Series 062 Bus Bar Connectors Application Specification 114-2130 22 DEC 11 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches].
Power Supply, 17-inch
apple imac G5 Power Supply, 17-inch Replacement Instructions Follow the instructions in this sheet carefully. Failure to follow these instructions could damage your equipment and void its warranty. Note:
Ioline 300/350HF System
Quick Start Guide Ioline 300/350HF System User Notice Trademarks Ioline is a trademark of Ioline Corporation. Other product names, logos, designs, titles, words or phrases mentioned within this publication
DirectCommand Installation 5 Channel Spreader Control Module Technology
DirectCommand Installation Ag Leader Technology Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Direct Command Kit 4100582 1 Cable Installation
Installation Manual AIS AIS 200A-35
Installation Manual AIS 200-35 AIS 200A-35 SANDIA aerospace 3700 Osuna Rd NE, Ste 711 Albuquerque, NM 87109 www.sandia.aero This document and the information contained herein is the proprietary data of
Powered RS Port PCI Card
Powered RS-232 4-Port PCI Card User Manual Ver. 3.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3 1.2 Features...
MX Educational Target User Manual
MX Educational Target User Manual Revision History Date Description Initial release. Table of Contents 1. Introduction... 4 1.1. Module Models... 4 1.2. Package Contents... 4 1.3. Key Hardware Features...
Scope adapters and probes. Surface mount QFP Logic Analyzer adapters
Logic Analyzer Adapters Logic Analyzer and scope adapters are designed to give access to each signal pin on a high-density IC. Some variations are specifically adapted to connect to a specific logic analyzer
TVA2.1 2-Channel Digital Amplifier Installation Manual
TVA2.1 2-Channel Digital Amplifier Installation Manual SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE
SNAP-IT-1U Installation Guide
Chapter 1 SNAP-IT-1U Installation Guide Introduction The SNAP-IT rack-mount unit is a packaged solution for attaching electrical, electronic, and mechanical devices to an Ethernet network. Once attached
User Guide for NUC8i5BEK, NUC8i3BEK. Intel NUC Kit NUC8i5BEK Intel NUC Kit NUC8i3BEK. User Guide
Intel NUC Kit NUC8i5BEK Intel NUC Kit NUC8i3BEK User Guide 1 Before You Begin CAUTIONS The steps in this guide assume you re familiar with computer terminology and with the safety practices and regulatory
PLC Racks IC697CHS782/783
5 1 PLC Racks IC697CHS782/783 (IC697CHS782/783) datasheet Features Accepts 3rd Party VME modules which require 0.8 spacing. Accepts all IC697 PLC module types. Rear mount rack mounts in a 10 (254 mm) deep
Ideal for a wide range of applications such as wafer test or PCB test for mm-wave, Microwave, RF or Automotive applications
Data Sheet The W2.5 x L6.5 mini probe station is a manual probe station designed for a versatile and comfortable operation on up to 2.5 wafers or 2.5 x 6.5 printed circuit board assemblies. This mini probe
Instructions. P6434 Mass Termination Probe
Instructions P6434 Mass Termination Probe 070-9793-04 www.tektronix.com 070979304 Copyright Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending.
Powered RS Port PCIe Card
Powered RS-232 2-Port PCIe Card User Manual Ver. 3.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3 1.2
TeamBoard Quick Start #1
www.touchboards.com 205 Westwood Ave.Long Branch, NJ 07740 1-866-942-6273 Sales@touchboards.com Quick Start #1 Welcome to! These Quick Start Cards address some basics, from installation steps to creating
CONTROL MICROSYSTEMS Analog Input Module. Hardware Manual
550 Analog Input Hardware Manual CONTROL MICROSYSTEMS SCADA products... for the distance Steacie Drive Telephone: 63-59-93 Kanata, Ontario Facsimile: 63-59-0 KK A9 Technical Support: -6-676 Canada -CONTROL
Installation of the POTS splitter card requires the following steps: Determining the cables you need. Installing the POTS splitter chassis
5910 High Density Lifeline POTS Splitter Installation Instructions Document Number 5910-A2-GZ40-00 May 2005 About the 5910 POTS Splitter The 5910 is a double-density POTS splitter that separates the (Digital
Termination End. Figure 1
AMP- LATCH* Application Specification Universal Headers 114-40020 with ACTION PIN* Contacts 19 DEC 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
TARA CONTROLS AGC-5. UCI Random Start USER S GUIDE. With Optional Warning Flashes for the Hearing Impaired. TARA CONTROLS by Cartessa Corporation
TARA CONTROLS AGC-5 UCI Random Start USER S GUIDE With Optional Warning Flashes for the Hearing Impaired TARA CONTROLS by Cartessa Corporation 4825 Cincinnati-Brookville Road Shandon, Ohio 45063 Phone:
3M Indoor Protected Building Entrance Terminal 4588V-QCS Series
3M Indoor Protected Building Entrance Terminal 4588V-QCS Series with 3M Quick Connect System 2811 Dry Flame Retardant Block Instructions Underwriters Laboratories (UL 348X) Listed April 2010 3 78-0013-1813-4-A
IQEXTENDER IQ Module. Board Manual. March Order Number:
IQEXTENDER IQ Module Board Manual March 1998 Order Number: 272942-002 Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise,
Indoor Protected Entrance Terminal 4588 Series
Indoor Protected Entrance Terminal 4588 Series Instructions Underwriters Laboratories (UL) Listed September 2003 78-8135-1209-8-A 1.0 General The 3M Indoor Protected Entrance Terminal (PET) 4588 Series
Tone Generator and Probe
Tone Generator and Probe JUNE 2001 TS141A-R2 CUSTOMER SUPPORT INFORMATION Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX FREE technical support, 24 hours a day, 7
Allows full two way communication from any USB or RS232 port to an SPI device.
RS232 & USB to SPI Bi-Directional Converter: RS232SPI or USBSPI The Big Deal Allows Bi-Directional communication between USB or RS232 to SPI Easy-to-use, quick-loading GUI and API objects for programmers
Raspberry Pi board. EB080
Raspberry Pi board www.matrixmultimedia.com EB080 Contents About this document 3 Board layout 3 General information 4 Circuit description 4 Circuit diagram 5 2 Copyright Matrix Multimedia Ltd. About this
Tim Hortons EI30 Ethernet Interface Circuit Board
Tim Hortons EI30 Ethernet Interface Circuit Board INSTALLATION INSTRUCTIONS Replacing the Precidia Unit with the HME EI30 Thank you for purchasing the EI30 Ethernet Interface. The EI30 enables the System
Installation Guide AMM-1525M/1510M/525M. SCSI Audio Host Adapters and Sound Cards
R Installation Guide AMM-1525M/1510M/525M SCSI Audio Host Adapters and Sound Cards 1 Getting Started This document provides the basic information needed to quickly configure and install the Adaptec AMM
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
What is a Hotwire Shelf Concentration Module?
Hotwire Shelf Concentration Module (SCM) Card Installation Instructions Document Number 8021-A2-GZ40-40 February 2001 What is a Hotwire Shelf Concentration Module? A Hotwire Shelf Concentration Module
Fujitsu Stylistic ST4000 Series TABLET DOCK USER S GUIDE
Fujitsu Stylistic ST4000 Series TABLET DOCK USER S GUIDE DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Party Name: Fujitsu PC Corporation Address: 5200 Patrick Henry Drive Santa Clara,
Mini-Dock Installation Guide
minidock.fm Page 1 Tuesday, August 21, 2001 3:30 PM F u j i t s u P C C o r p o r a t i o n Mini-Dock Installation Guide FPCPR25 I N S T R U C T I O N S This mini-dock is designed to extend the connectivity
RSA5100B Series Real-Time Signal Analyzers RSA5BUP Option 300 High Performance Real Time Upgrade Instructions
xx ZZZ RSA5100B Series Real-Time Signal Analyzers RSA5BUP Option 300 High Performance Real Time Upgrade Instructions www.tektronix.com *P075105800* 075-1058-00 Copyright Tektronix. All rights reserved.
Advanced Distribution Cable Junction Box For Spectra RMS Molded-Case Circuit Breakers with Advanced Feature microentelliguard TM Trip Units
GE Energy Industrial Solutions GEH-704 Installation Instructions Advanced Distribution Cable Junction Box For Spectra RMS Molded-Case Circuit Breakers with Advanced Feature microentelliguard TM Trip Units
Installation Instructions
Installation Instructions Kit Core Upgrade-EMB-B75B Without Modem Kit #22166905 These instructions outline the procedures to install the EMB-B75B motherboard into your existing Computer Core Chassis. There
CompuScope 3200 product introduction
CompuScope 3200 product introduction CompuScope 3200 is a PCI bus based board-level product that allows the user to capture up to 32 bits of singleended CMOS/TTL or differential ECL/PECL digital data into
University of Alexandria Faculty of Engineering Division of Communications & Electronics
University of Alexandria Faculty of Engineering Division of Communications & Electronics Subject Name: Microprocessors Lecturer: Dr. Mohammed Morsy Academic Year: 2012 2013 Assistants: Eng. Ahmed Bedewy
Installation Manual. This 5.25 enclosure is designed to provide a solution to connect. existing storage devices such as 3.5 IDE hard drive, MO drives,
Installation Manual Introduction This 5.25 enclosure is designed to provide a solution to connect existing storage devices such as 3.5 IDE hard drive, MO drives, CD devices or DVD devices to USB2.0 or
Open Processor with Carrier CCN DataLink Driver
Open Processor with Carrier CCN DataLink Driver Product Description Each Open Processor (Figure 1) contains the main processor, memory, and communications circuitry for connecting the APOGEE Automation
CH 2 CH 1 BALANCED INPUTS
P.I.P.- FTE + + + = NON-INVERTING = INVERTING CH 2 CH 1 BALANCED INPUTS CAUTION DO NOT USE AMPLIFIER PHONE JACKS WITH THIS MODULE PLUGGED IN. 1997 by Crown International, Inc., P.O. Box 1000, Elkhart,
Code Dynamics, Inc. Port Splitter
Code Dynamics, Inc. Port Splitter Thank you for purchasing the Port Splitter. With this product, you can utilize a single Andover port for both the modem and PC connections. This device connects to the
Cab Box Kit Dome Plug Cab Box Cab Box Lid
DirectCommand Installation Ag Leader Technology Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Direct Command Kit 4100578 1 Cable Installation
AMP-HDI* Connectors. Solder Tail. Keying Hole Keying Hole. Vertical Pin Assembly. Figure 1
AMP-HDI* Connectors Application Specification 114-9008 24 APR 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and inches]. Unless
3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series
3M Indoor Building Entrance Terminal (IBET) 4790V and 4790VL Series with 3M Quick Connect System (QCS) 2811 Dry Flame-Retardant Block and RJ-11 Test Ports Instructions Underwriters Laboratories (UL 348X)
QuickNetwork QND300 Distribution Panel
QuickNetwork QND300 Distribution Panel Installation Guide CSQND300V1 10/04 Rev. A Before You Get Started This manual is designed to provide an overview of the installation process and guidelines for installing
MS-7000: SuperStar Reader
The MS-7000 SuperStar Reader The MS-7000 SuperStar Reader is intended for installation in proximity applications where an extended read range is required. The reader provides an audio beeper and a multi
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS
CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS FOR USE WITH: HAMMOND Organ Models L-100, M-100 Series, M-l, M-2, M-3 LESLIE Speaker Models 760, 770, 825 KIT CONTENT Console Connector Assembly 043075
COPPER-T EXTENDER TABLE OF CONTENTS SECTION 1 - DESCRIPTION SECTION 2 - SPECIFICATIONS... SECTION 3 - INSTALLATION
COPPER-T EXTENDER TABLE OF CONTENTS SECTION - DESCRIPTION...... SECTION - SPECIFICATIONS...... 3 SECTION 3 - INSTALLATION...... SECTION - FRONT PANEL INDICATORS... 7 SECTION - INTERFACE SIGNALS AND CABLES...
QuickNetwork QND200 Distribution Panel
QuickNetwork QND200 Distribution Panel Installation Guide CSQND200V1 10/04 Rev. A Before You Get Started This manual is designed to provide an overview of the installation process and guidelines for installing
Oct 16 Rev D
Next Generation ARINC 600 Connector Application Specification 114-13272 05 Oct 16 Rev D NOTE All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters
Powered RS Port PCIe Card
Powered RS-232 4-Port PCIe Card User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners. Contents: Chapter 1: Introduction... 3 1.1 Product Introduction... 3 1.2
How to Design Custom Enclosures for Motherboard-Based Systems
PROTOCASE TECHNICAL BULLETIN How to Design Custom Enclosures for Motherboard-Based Systems (covering ATX and Mini ITX form factors) Document Edition - 1 Last Updated: June 6 th,2011 Protocase, Inc. All
AI port High Speed Asynchronous Line Card Installation Guide
AI232 32-port High Speed Asynchronous Line Card Installation Guide Part Number QR-232 Rev 3 2008 by Kentrox, Inc. All rights reserved. Copyright 2008 by Kentrox, Inc. All Rights Reserved. The material
MS-3000 MicroStar Reader
MicroStar Reader The MicroStar Reader The MicroStar Reader is intended for installation on a window mullion or a door frame, on or off metal, in proximity applications where an unobtrusive reader is required.
DYNAMIC ENGINEERING 435 Park Dr., Ben Lomond, Calif Fax Est
DYNAMIC ENGINEERING 435 Park Dr., Ben Lomond, Calif. 95005 831-336-8891 Fax 831-336-3840 http://www.dyneng.com sales@dyneng.com Est. 1988 User Manual c P C I 2 P M C cpci 1 Slot PMC Compatible Carrier
Description. Overview. Features S90-MTM-DEV-2. MTM Development Board 2.0 Datasheet
Overview The Acroname Development Board 2.0 (-DEV-2), part of Acroname s (Manufacturing Test Module) product series, is a connectivity solution designed for development or integration to wire-based testers.
Intel NUC Kit NUC8i7HNK & NUC8i7HVK User Guide. Intel NUC Kit NUC8i7HNK Intel NUC Kit NUC8i7HVK. User Guide
Intel NUC Kit NUC8i7HNK Intel NUC Kit NUC8i7HVK User Guide 1 Before You Begin CAUTIONS The procedures in this user guide assume familiarity with the general terminology associated with personal computers
Direct Injection Module
Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part number Quantity DirectCommand Kit 4100571 1 Module Mounting Hardware Kit 2001354-1 1 Installation Instructions
BUTT SET MODEL TT-200
TT-200 (BS-100) 2/12/01 4:00 PM Page 1 BUTT SET MODEL TT-200 Instruction Manual Copyright 2001 Amprobe AMPROBE TT-200 (BS-100) 2/12/01 4:00 PM Page 2 INTRODUCTION The TT-200 is designed for the installers,
PCIE FIVE SLOT EXPANSION SYSTEM USER S MANUAL
PCIE2-2707 FIVE SLOT EXPANSION SYSTEM USER S MANUAL The information in this document has been carefully checked and is believed to be entirely reliable. However, no responsibility is assumed for inaccuracies.
Basketball Shot Clock Set LX2180 Manual
Basketball Shot Clock Set LX2180 Manual 72 Industrial Boulevard Wrightsville, GA 31096 Phone: (800) 445-7843 Fax: (800) 864-0212 www.electro-mech.com LX2180 Revision 5 February 8, 2013 Table of Contents