SMC Australia New Zealand IECEx & ATEX Compliant solenoid valves Rev 1.0

Transcription

1 Eplosion Proof 3, 5 port solenoid valves IECEX compliant solenoid valves for Australia and New Zealand VF1/3/5000 Series XAR4001, XAR4002, XAR4003 VP3/5/700 Series XAR4010, XAR4011, XAR4012 VFN2000/200 Series XAR4013, XAR4014, XAR4015 Features: SMC Australia adapts Nass Magnet GmbH solenoid coils to SMC s pilot operated valve bodies. Nass solenoid operators have been tested by the Physikalisch Technische Bundesanstalt (PTB) according to IECE Standards. 1 P age

2 When installed, the valves are certified for equipment protection by either of these: Intrinsic safety "i" 1,2 IEC E ia IIC/IIB T6 Zones/Marking 21, 22 n/a Certificated by PTB Certification No: IECEX PTB and PTB 02 ATEX ports VF1/3/5000 Series XAR ports VP3/5/700 Series XAR4010 5/3 ports NAMUR Interface VFN2000/200 Series XAR4013 VF1000, VF3000 and VP300 NOT suited for block assembly (consult SMC) Intrinsic safety "i" and dust protection by enclosure 1,2 IEC E ia IIC/IIB T6 Zones/Marking 21, 22 IEC E t IIIC T80 C Certificated by PTB Certification No: IECEX PTB and PTB 09 ATEX 2001 Encapsulation "mb" and protection by enclosure tb 5 ports VF1/3/5000 Series XAXTBC 3 ports VP3/5/700 Series XAXTBC 5/3 ports NAMUR Interface VFN2000/200 Series XAXTBC VF1000, VF3000 and VP300 NOT suited for block assembly (consult SMC) 1,2 IEC E mb IIC T6 Zones/Marking 21, 22 IEC E mb tb IIIC T80 C Certificated by PTB Certificate No: IECEX PTB X and PTB 03 ATEX 2018X Encapsulation "mb" and protection by enclosure tb 5 ports VF1/3/5000 Series XAR ports VP3/5/700 Series XAR4011 5/3 ports NAMUR Interface VFN2000/200 Series XAR4014 VF1000, VF3000 and VP300 NOT suited for block assembly (consult SMC) 1,2 IEC E mb IIC T4 Zones/Marking 21, 22 IEC E mb tb IIIC T130 C Certificated by PTB Certificate No: IECEX PTB X and PTB 00 ATEX 2001X 22mm width (*) All IECE Certificates of Conformity are available on 5 ports VF1/3/5000 Series XAR ports VP3/5/700 Series XAR4012 5/3 ports NAMUR Interface VFN2000/200 Series XAR4015 ALL suited for single and block assembly 2 P age

3 Main Valve Specifications VF1/3/5000 Series Note 1: Choose standard operating pressure for intrinsic safety and high operating pressure for encapsulated types. Note 2: When using encapsulated solenoids in a manifold assemblies, ma. operating and fluid temperature is 40 C VP3/5/700 Series Note 1: Choose standard operating pressure for intrinsic safety and high operating pressure for encapsulated types. Note 2: When using encapsulated solenoids in a manifold assemblies, ma. operating and fluid temperature is 40 C Note 3: Eternal pilot is only indent option, epect longer deliveries. VFN2000/200 Series 3 P age

4 Solenoid Specifications Applicable Series RFS part numbers VF1/3/5000 Series XAR4001 XAR4002 XAR4003 VP3/5/700 Series XAR4010 XAR4011 XAR4012 VFN Series XAR4013 XAR4014 XAR4015 Coil Specifications Nass solenoid operator type 1259 (*) type 1262 type 0515 type 1215 type 0513 type 1213 Type of protection Intrinsic safety "i" Encapsulation "mb" Encapsulation "mb" Temperature Class T6 T6 T4 1,2 IEC E ia IIC/IIB T6 IEC E ia IIC/IIB T6 21, 22 n/a IEC E t IIIC T80 C 24VAC, 48VAC, 110VAC, 240VAC 24VDC, 12VDC, 48VDC 110VAC, 240VAC Electrical entry DIN connector Grommet Grommet Ingress Protection IP65 IP65 IP65 Equipment Protection Level (EPL) Ga / Db Gb / Db Gb / Db CE Status CE compliant CE compliant CE compliant 24VDC, Solenoid operator width 30mm 30mm 22mm EC Eamination certificate No IECEX PTB IECEX PTB X IECEX PTB X Zones/Marking Rated voltage 24VDC IEC E mb IIC T6 IEC E mb IIC T4 IEC E mb tb IIIC T80 C IEC E mb tb IIIC T130 C *) Type 1259 soon to be superseded by Type 1262, subject to stock ( ) Other voltages available on request Refer to installation and operating instructions to understand specific limitations as to zones applications and how these valves must be installed to maintain legal and safety compliance for Hazardous Area application. The ignition potential for the coils is rated for a wider range of temperatures than that of the operation requirements for the valve assembly. These products are not suitable for Zone 0. For Encapsulated valves, each solenoid operated has to be protected by a fuse according to the rated current (ma 3 rated current) resp motor protection switch with short circuit and fast thermal tripping protection. The fuse voltage has to be equal or higher than the rated solenoid voltage. The shutdown capability has to be equal or higher than the ma. assumed short circuit current at the installation point 4 P age

5 Flow Rate Characteristics This is a brief summary of the ma. flow rate characteristics for these Series, if you require detailed information on flows for each valve model/type of actuation please refer to individual catalogues. Flow characteristics Flow characteristics Flow characteristics Model 4/2 5/3 (A/B EA/EB) 4/2 5/3 4/2 5/3 (A/B EA/EB) (A/B EA/EB) Cdm 3 /s bar] b Cv VF VF VF VP VP VP VFN200N VFN2000N P age

6 How to Order VF1/3/5000 Series Body Ported / Single Unit How to Order Valve VF Body Size 5 Voltage 1 VF1000 Voltage 3 VF3000 XAR4001 XAR4002 XAR VF VAC 50/60Hz 5 24VDC 2 Type of Actuation 6 12VDC 1 2 position single 7 240VAC 50/60Hz 2 2 position doble 8 48VAC 50/60Hz 3 3 position closed centre B 24VAC 50/60Hz 4 3 position ehaust center Y 48VDC 50/60Hz 5 3 position pressure centre 9 Other voltages (RFP) *) Only 1 and 2 are available for VF Electrical entry 3 Body Model/Options Intrinsic Safety "ia" Encapsulation "mb" VF1000 VF3000 VF5000 D 20 G Manual Override **) Other Body/Options available as indent Nil D 4 Pressure Specifications 8 A, B Port size Nil K Pressure Standard (0.7MPa) High pressure (1MPa) Intrinsic Safety "ia" XAR4001 Encapsulation "mb" XAR4002/3 Port Size VF1000 VF3000 VF5000 M5 M50.8 * 01 1/8"BSP * 02 1/4"BSP * 03 3/8"BSP *)indent only DIN Terminal Grommet with 3m cable Push type Push turn locking type 9 RFS Number 10 Bracket Protection Type Zones Nil Without bracket XAR4001 1,2 Intrinsic Safety VF1000/3000 single type bracket CANNOT be retrofitted 1,2 F "ia" VF1000 Double type XAR4002 XAR4003 Encapsulation "mb" 21,22 1,2 21,22 1,2 21,22 IECE Marking IEC E ia IIC/IIB T6 IEC E ia IIC/IIB T6 IEC E t IIIC T80 C IEC E mb IIC T6 IEC E mb tb IIIC T80 C IEC E mb IIC T4 IEC E mb tb IIIC T130 C 6 P age

7 VF3/5000 Series Base Mounted / Single Unit How to Order Valve VF Body Size 6 Electrical entry 3 VF3000 Intrinsic Safety "ia" Encapsulation "mb" DIN Terminal Grommet with 3m cable 5 VF5000 D G 2 Type of Actuation 1 2 position single 7 Manual Override 2 2 position doble Nil 3 3 position closed centre D position ehaust center 3 position pressure centre 3 Body Option 8 Port Size Option VF3000 VF5000 Port Size VF3000 VF Common ehaust Nil Single unit without subplate 4 Pilot valve base eh 02 1/4"BSP 03 3/8"BSP 4 Pressure Specifications 04 1/2"BSP Nil Pressure Standard (0.7MPa) Intrinsic Safety "ia" XAR4001 Encapsulation "mb" XAR4002/3 K High pressure (1MPa) 9 RFS Number Push type Push turn locking type * Without the sub plate, two mounting screws and a gasket are included Protection Type Zones IECE Marking Intrinsic Safety IEC E ia IIC/IIB T6 "ia" 1,2 IEC E ia IIC/IIB T6 Voltage XAR4001 XAR4002 XAR ,22 IEC E t IIIC T80 C 3 110VAC 50/60Hz 1,2 IEC E mb IIC T6 XAR VDC Encapsulation 21,22 IEC E mb tb IIIC T80 C 6 12VDC "mb" 1,2 IEC E mb IIC T4 XAR VAC 50/60Hz 21,22 IEC E mb tb IIIC T130 C 8 48VAC 50/60Hz B 24VAC 50/60Hz Y 48VDC 50/60Hz 9 Other vol tages (RFP) 5 Voltage XAR4001 1,2 How to Order Subplate (Single Unit) VF Body Size 3 VF VF Port Size Port Size VF3000 VF /4"BSP 2 3/8"BSP 3 1/2"BSP 7 P age

8 VF1/3/5000 Series Body Ported / Manifold How to Order Valve (with a gasket and two mounting screws) VF Body Size 6 Electrical entry 1 VF1000 Intrinsic Safety "ia" Encapsulation "mb" 3 VF3000 D DIN Terminal 5 VF5000 G Grommet with 3m cable 2 Type of Actuation 7 Manual Override 1 2 position single Nil 2 2 position doble D 3 3 position closed centre 4 3 position ehaust center 8 A, B Port size 5 3 position pressure centre Port Size VF1000 VF3000 VF5000 *) Only 1 and 2 are available for VF1000 M5 M50.8 * 01 1/8"BSP * 3 Body Model/Options 02 1/4"BSP * VF1000 VF3000 VF /8"BSP 33 *)indent only 23 **) Other Body/Options available as indent 9 RFS Number Protection Type Zones 4 Pressure Specifications XAR4001 1,2 Intrinsic Safety "ia" Encapsulation "mb" Pressure XAR4001 XAR4002/3 Nil Standard (0.7MPa) K High pressure (1MPa) XAR4002 XAR4003 Push type Push turn locking type Intrinsic Safety "ia" Encapsulation "mb" 1,2 21,22 1,2 21,22 1,2 21,22 IECE Marking IEC E ia IIC/IIB T6 IEC E ia IIC/IIB T6 IEC E t IIIC T80 C IEC E mb IIC T6 IEC E mb tb IIIC T80 C IEC E mb IIC T4 IEC E mb tb IIIC T130 C 5 Voltage Voltage 3 110VAC 50/60Hz 5 24VDC 6 12VDC 7 240VAC 50/60Hz 8 48VAC 50/60Hz B 24VAC 50/60Hz Y 48VDC 50/60Hz 9 Other voltages (RFP) XAR4001 XAR4002 XAR4003 How to Order Manifold VV5F Body Size 3 Stations 1 VF stations 3 VF VF stations 2 Manifold Model Table 1 Manifold Options *) up to 10 stations for VV5F5 20 and up to 15 stations for VV5F5 21 P, R Port Size VF1000 VF3000 VF5000 VV5F1 30* VV5F3 30* 30 1/8"BSP XAR4001 * * 1/4"BSP * * 20 3/8"BSP XAR4002 * * 21 1/2"BSP XAR4003 *)A and B ports are on the top *)When using VF1/3000 with 30mm coil (XAR4001, XAR4002) you cannot mount valves side by side *) Refer to table 1 please use 22mm width coil (XAR4003) or blanking plate. VF1000 VF3000 VF5000 Mounting screw Gasket Blanking plate DXT AXT DXT DXT DXT DXT A DXT A VF A VV5F5 2* 8 P age

9 VF1/3/5000 Series Base Mounted / Manifold How to Order Valve (with a gasket and two mounting screws) VF Body Size 6 Electrical entry 3 VF3000 Intrinsic Safety "ia" Encapsulation "mb" 5 VF5000 D G DIN Terminal Grommet with 3m cable 2 Type of Actuation 1 2 position single 7 Manual Override 2 2 position doble Nil Push type 3 3 position closed centre D Push turn locking type 4 3 position ehaust center 5 3 position pressure centre 3 Body Option 8 RFS Number Option VF3000 VF5000 Protection Type Zones IECE Marking 3 Main/Pilot valve common eh XAR4001 1,2 IEC E ia IIC/IIB T6 4 Pilot valve base ehaust Intrinsic Safety "ia" 1,2 IEC E ia IIC/IIB T6 21,22 IEC E t IIIC T80 C 4 Pressure Specifications 1,2 IEC E mb IIC T6 XAR4002 Pressure Encapsulation "mb" 21,22 IEC E mb tb IIIC T80 C Intrinsic Safety "ia" Encapsulation "mb" XAR4001 XAR4002/3 1,2 IEC E mb IIC T4 XAR4003 Nil Standard (0.7MPa) 21,22 IEC E mb tb IIIC T130 C K High pressure (1MPa) 5 Voltage Voltage 3 110VAC 50/60Hz 5 24VDC 6 12VDC 7 240VAC 50/60Hz 8 48VAC 50/60Hz B 24VAC 50/60Hz Y 48VDC 50/60Hz 9 Other vol tages (RFP) XAR4001 XAR4002 XAR4003 How to Order Manifold VV5F Series 2 Stations Series P, R port size A, B port zise 02 2 stations 3 VF3000 1/4"BSP 1/4"BSP... 5 VF5000 3/8"BSP 1/4"BSP stations *) A and B ports are made on the bottom *) up to 10 stations for VV5F5 **) Refer totable 1 Table 1 VV5F3 40 VV5F5 40 XAR4001 * * XAR4002 * XAR4003 *)When using VF3000 with 30mm coil (XAR4001, XAR4002) you cannot mount va lves side by side please use 22mm width coil (XAR4003) or blanking plate. Manifold Options Mounting screw Gasket Blanking plate VF3000 DXT DXT DXT A VF5000 AXT DXT VF A 9 P age

10 VP3/5/700 Series Body Ported / Single Unit How to Order Valve VP Series 4 Voltage 3 VP300 5 VP500 7 VP VAC 50/60Hz 5 24VDC 2 Pilot Type 6 12VDC Nil Internal Pilot 7 240VAC 50/60Hz R Eternal Pilot 8 48VAC 50/60Hz B 24VAC 50/60Hz 3 Pressure Specifications Y 48VDC 50/60Hz Nil K Pressure Standard (0.7MPa) High pressure (1MPa) Intrinsic Safety "ia" XAR4010 ncapsulation "mb XAR4011/12 9 Other vol tages (RFP) 5 Electrical entry 7 A, B Port size 6 Manual Override Port Size VP300 VP500 VP700 Nil Push type Push turn locking type 01 1/8"BSP D 02 1/4"BSP 03 3/8"BSP 9 RFS Number 04 1/2"BSP Protection Type Zones Voltage Entry Intrinsic Safety "ia" Encapsulation "mb" D DIN Terminal G Grommet with 3m cable IECE Marking XAR4010 1,2 IEC E ia IIC/IIB T6 Intrinsic Safety "ia" A N.C. 21,22 IEC E t IIIC T80 C B N.O 1,2 IEC E mb IIC T6 XAR ,22 IEC E mb tb IIIC T80 C Encapsulation "mb" 1,2 IEC E mb IIC T4 XAR ,22 IEC E mb tb IIIC T130 C 8 Type of Actuation 1,2 IEC E ia IIC/IIB T6 XAR4010 XAR4011 XAR P age

11 VP3/5/700 Series Base Mounted / Single Unit How to Order Valve VP Series 4 Voltage 3 VP300 Voltage 5 VP500 XAR4010 XAR4011 XAR4012 R Eternal Pilot 8 48VAC 50/60Hz B 24VAC 50/60Hz Intrinsic Safety "ia" Encapsulation "mb" 9 Other voltages (RFP) Pressure XAR4010 XAR4011/12 5 Electrical entry Nil Standard (0.7MPa) Entry Intrinsic Safety "ia" Encapsulation "mb" K High pressure D DIN Terminal (1MPa) G Grommet with 3m cable 7 VP VAC 50/60Hz 5 24VDC 2 Pilot Type 6 12VDC Nil Internal Pilot 7 240VAC 50/60Hz 3 Pressure Specifications Y 48VDC 50/60Hz 7 A, B Port size 6 Manual Override Port Size VP300 VP500 VP700 Nil Push type Nil Without sub plate D Push turn locking type 01 1/8"BSP 02 1/4"BSP 9 RFS Number 03 3/8"BSP Protection Type Zones IECE Marking 04 1/2"BSP XAR4010 1,2 IEC E ia IIC/IIB T6 * Without the sub plate, two mounting screws and a gasket are included Intrinsic Safety "ia" 1,2 IEC E ia IIC/IIB T6 21,22 IEC E t IIIC T80 C 8 Type of Actuation 1,2 IEC E mb IIC T6 XAR4011 A N.C. Encapsulation "mb" 21,22 IEC E mb tb IIIC T80 C B N.O 1,2 IEC E mb IIC T4 XAR ,22 IEC E mb tb IIIC T130 C How to Order Subplate VP Series 2 Port Size 3 VP344 VP344 VP544 VP744 5 VP /8"BSP 1/4"BSP 3/8"BSP 7 VP /4"BSP 3/8"BSP 1/2"BSP 11 P age

12 VP3/5/700 Series Base Mounted / Manifold How to Order Valve (with a gasket and two mounting screws) VP Series 5 Electrical entry 3 VP300 Entry Intrinsic Safety "ia" Encapsulation "mb" 5 VP500 D DIN Terminal 7 VP700 G Grommet with 3m cable 2 Pilot Type 6 Manual Override Nil Internal Pilot Nil Push type R Eternal Pilot D Push turn locking type 3 Pressure Specifications 7 Type of Actuation Intrinsic Safety "ia" Encapsulation "mb" Pressure XAR4010 XAR4011/12 Nil Standard (0.7MPa) K High pressure (1MPa) 4 Voltage 8 RFS Number Voltage Protection Type Zones IECE Marking XAR4010 XAR4011 XAR4012 XAR4010 1,2 IEC E ia IIC/IIB T VAC 50/60Hz Intrinsic Safety "ia" 1,2 IEC E ia IIC/IIB T6 5 24VDC 21,22 IEC E t IIIC T80 C 6 12VDC 1,2 IEC E mb IIC T6 XAR VAC 50/60Hz 21,22 IEC E mb tb IIIC T80 C Encapsulation "mb" 8 48VAC 50/60Hz 1,2 IEC E mb IIC T4 XAR4012 B 24VAC 50/60Hz 21,22 IEC E mb tb IIIC T130 C Y 48VDC 50/60Hz 9 Other volta ges (RFP) How to Order Manifold VV3P Series 4 Stations 3 VP stations 5 VP VP stations A B N.C. N.O 2 Ehaust Type 5 Port Size 41 Common ehaust Port Size 42 Individual ehaust 02 1/4"BSP 03 3/8"BSP 3 Pilot Type 04 1/2"BSP Nil R Internal Pilot Eternal Pilot *) When the eternal pilot type manifold, Applicable Series VP300 VP500 VP700 Manifold Options VP344 VP544 VP744 Mounting screw (1pc) Gasket Blanking plate VP VP VP VP VP VP VP A VP A VP A 12 P age

13 VFN200/2000 Series Namur Interface How to Order 3 Ports Valve V F N N Voltage 3 Manual Override Voltage 3 110VAC 50/60Hz XAR4013 XAR4014 XAR VDC 4 RFS Number A B Push type Push turn locking type 6 12VDC Protection Type Zones 7 240VAC 50/60Hz XAR4013 1,2 8 48VAC 50/60Hz Intrinsic Safety "ia" 1,2 B 24VAC 50/60Hz 21,22 Y 48VDC 50/60Hz 1,2 XAR Other vol ta ges (RFP) 21,22 Encapsulation "mb" 1,2 XAR Electrical entry 21,22 Entry Intrinsic Safety "ia" Encapsulation "mb" D G DIN Terminal Grommet with 3m cable Note) For 3/2 with double solenoid, please use VFN2120N *** 02 D XAR40*** IECE Marking IEC E ia IIC/IIB T6 IEC E ia IIC/IIB T6 IEC E t IIIC T80 C IEC E mb IIC T6 IEC E mb tb IIIC T80 C IEC E mb IIC T4 IEC E mb tb IIIC T130 C How to Order 5 Ports Valve VF N21 20N Solenoid 3 Electrical entry 1 Single solenoid Entry Intrinsic Safety "ia" Encapsulation "mb" 2 Double Solenoid D DIN Terminal G Grommet with 3m cable 2 Voltage 4 Manual Override Voltage 3 110VAC 50/60Hz XAR4013 XAR4014 XAR VDC 5 RFS Number A B Push type Push turn locking type 6 12VDC Protection Type Zones IECE Marking 7 240VAC 50/60Hz XAR4013 1,2 IEC E ia IIC/IIB T6 8 48VAC 50/60Hz Intrinsic Safety "ia" 1,2 IEC E ia IIC/IIB T6 B 24VAC 50/60Hz 21,22 IEC E t IIIC T80 C Y 48VDC 50/60Hz 1,2 IEC E mb IIC T6 XAR Other volta ges (RFP) 21,22 IEC E mb tb IIIC T80 C Encapsulation "mb" 1,2 IEC E mb IIC T4 XAR ,22 IEC E mb tb IIIC T130 C 13 P age

14 Other Series available as Request for Special (epect longer deliveries) Below Series are also available with IECE compliant coils but they are not fully standardised, please consult SMC is you require more information, delivery and price. EVS7 6/8/10 Series Solenoid Valve (ISO CNOMO) 5 Ports AV Series Soft Start up Valve 3 Ports VNB Series Process Valve 2 Ports 14 P age

15 Spare coils Protection Method Intrisic Safety "ia" Encapsulation "mb" *) indent only Documents RFS part number Coil Type Coil part number Voltage Temperature Class zones 1, 2 XAR4001, XAR4010, XAR4013 type VDC T6 zones 1,2,21,22,,, type VDC T VDC T6 type VDC T VDC T6 XAR4002, XAR4011, XAR VAC T6 type VAC T VAC T6 zones 1,2,21, VAC T *) 12VDC T4 type VDC T4 XAR4003, XAR4012, XAR *) 48VDC T *) 24VAC T4 type VAC T VAC T4 Each order receives ONE hard copy of below documents: 1) Installation Instructions, 2) Drawing, 3) IECE Certificate of Conformity, 4) Nass coil operating instructions, 5)Operation Instructions for SMC s valve series 15 P age

16 Figure shows SMC s VF3000 double solenoid type base mounted with encapsulation mb coil (3m length) and set of documents provided SMC Pneumatics (Australia) Pty Ltd - All Rights Reserved. All reasonable efforts to ensure the accuracy of the information detailed in this catalogue were made at the time of publishing. However, SMC can in no way warrant the information herein contained as specifications are subject to change without notice. 16 P age