Catalog #11. SureFire Ag Systems

Transcription

1 t

2 Harne Layout for commend buying a Adapter Harne from that will connect dictly to the the connector on the Controller. For 3 5 product yt, only offer harnee that connect dictly to the. Thi method will NOT ue the John Dee Harne PFA THIS METHOD IS PREFERRED ON ALL SYSTEMS. IT IS REQUIRED ON SYSTEMS WITH 3 OR MORE PRODUCTS. t (purchae from John Dee) 2 or 3 Connector to JD ISOBUS and Power In Connector Implent Height Switch JD ISOBUS and Power Out Connector (Terminator) Adapter Harne and footwitch (purchae from ) Thee harnee connect the John Dee CANBUS to the. Each harne will go dictly to 12-pin product connector and 14-pin ection connector. Thi eliminate the Dee 47 pin connector and one layer of adapter harnee. offer many diffent Adapter Harnee built for a pecific ingle product or a group of product on multiple product yt. nal Harnee (purchae from ) nal Harnee connect the Adapter Harne to pump driver, flowmeter, hydraulic motor, peed enor, pu enor, valve and any other component in a liquid, dry or NH3 application yt. Product Section Connector() Connector() Product Harnee Section Harnee One i quid for each product being applied. They tart with a 12-pin connector and a unique to Liquid, Dry or NH3 application. Each ection harne tart with a 14-pin connector that allow up to 6 ection to be controlled. Page 2 Revied: 2/6/2017

3 Optional Harne Layout for for 1-2 product alo offer adapter harnee that will tart at the 47-pin connector on John Dee harne PFA Thee 47-pin adapter only upport 1 or 2 product yt. For 3-5 product yt you mut ue a adapter that attache dictly to the. commend fi adapter harnee that attach dictly to the (ee pviou page)., harne & footwitch (purchae from John Dee) 47-pin Adapter Harne (purchae from ) Thee harnee connect to the 47-pin connector on the John Dee harne. The 47-pin connector only upport 1 or 2 product, o only ue the 47-pin connector for 1 or 2 product yt. nal Harnee (purchae from ) nal Harnee connect the Adapter Harne to pump driver, flowmeter, hydraulic motor, peed enor, pu enor, valve and any other component in a liquid, dry or NH3 application yt. John Dee PFA10680 Harne with 47-pin connector 47-pin connector Implent Height Switch 1 or 2 Product Connector() Product Harnee One i quid for each product being applied. They tart with a 12-pin connector and a unique to Liquid, Dry or NH3 application. Section Connector() Section Harnee Each ection harne tart with a 14-pin connector that allow up to 6 ection to be controlled. t Page 3 Revied: 2/6/2017

4 Dict Adapter ECU Dict to 1 Liquid/Dry Product Generic, Liquid Fert Tool Type Section Liquid/Dry 1-6 None None None Thi i a very imple and common harne to operate a ingle liquid or dry product on the. It ha capability to operate up to 6 ection valve. Thi harne connect dictly to the and the John Dee CANBUS. Product 1: Product 2: Product 3: Product 4: Alo connect: Implent lift witch Profile: t Y1 ECU CANBUS Terminator / Next Component Implent Height John Dee CANBUS 5 length Product 1 (12-pin) Section 1-6 Commonly Orded With: Y1 nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) Y1 14-pin 6 Section nal Cable (6 ection, flow turn, pu) Page 4 Revied: 2/6/2017

5 Dict Adapter ECU Dict to 2 Liquid/Dry Product ECU Thi harne connect dictly to the and the John Dee CANBUS. Product 1: Product 2: Product 3: Product 4: Alo connect: Implent lift witch Implent Height CANBUS Terminator / Next Component Section t Thi harne operate a dual product yt on the JDRC The product can be liquid or dry. It ha capability to operate up to 12 ection valve. Thee can be plit evenly with 6 for each product or you could ue all 12 on one product and ha th with the econd product. Generic Type Liquid/Dry Liquid/Dry None None Profile: Y1 Section 7-12 Product 2 (12- pin) John Dee CANBUS 5 length Product 1 (12-pin) Section 1-6 Commonly Orded With: Y1 nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) Y1 14-pin 6 Section nal Cable (6 ection, flow turn, pu) Page 5 Revied: 2/6/2017

6 Dict Adapter ECU Dict to 3 Liquid/Dry Product Profile: Product 1: Product 2: Product 3: Product 4: Alo connect: Implent lift witch ECU t Thi harne connect dictly to the and the John Dee CANBUS. Section 7-12 Implent Height CANBUS Terminator / Next Component Product 3 (12- pin) Product 2 (12- pin) Product 1 (12-pin) John Dee CANBUS 5 length Section 1-6 Section or had Thi harne operate up to a 3 product yt on the. The product can be liquid or dry. It ha 2 ection valve connector for up to 12 ection valve total. The ection valve can be plit between the 3 product. In addition, product 3 alo ha ection in it 12-pin connector. Generic Type Liquid/Dry Liquid/Dry Liquid/Dry None Y1 Commonly Orded With: Y1 nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) Y1 14-pin 6 Section nal Cable (6 ection, flow turn, pu) Page 6 Revied: 2/6/2017

7 Dict Adapter ECU Dict to NH3 + 2 Liquid/Dry Product Profile: t Product 1: Product 2: Product 3: Product 4: Alo connect: Implent lift witch Section or had Thi harne operate up to a 3 product yt on the. Product 1 mut be ued for NH3. Product 2 & 3 can be liquid or dry. It ha 2 ection valve connector for up to 12 ection valve total. Section 1-6 can only be ued for NH3. Section 7-12 can be ued for product 2 & 3. Product 3 alo ha ection in it 12-pin connector. Thi harne connect dictly to the and the John Dee CANBUS. NH3 Type NH3 Liquid/Dry Liquid/Dry None Y1 ECU CANBUS Terminator / Next Component Implent Height Product 3 (12- pin) Section 7-12 John Dee CANBUS 5 length Section 1-6 Product 2 (12- pin) Product 1 NH3 (12pin) with Section 1-3 Commonly Orded With: Y1 or Y1 12-pin nal Cable for Torpedo NH3 t Y1 or Y1 12-pin nal Cable for Raven NH3 t Y1 nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) Y1 14-pin 6 Section nal Cable (6 ection, flow turn, pu) Y1 14-pin 6 Section Raven Valve nal Cable (6 ection, flow turn, pu) 3463Y1 and 3607Y1 work for both liquid and NH3 ection valve Page 7 Revied: 2/6/2017

8 Dict Adapter ECU Dict to 4 Liquid/Dry Product Profile: Thi harne connect dictly to the and the John Dee CANBUS. Product 1: Product 2: Product 3: Product 4: Alo connect: Implent lift witch ECU Section or had or had t Thi harne operate up to a four product yt on the. The product can be liquid or dry. It ha 2 ection valve connector for up to 12 ection valve. The ection valve can be plit between the 4 product. In addition, product 3 ha ection in it 12-pin connector and product 4 ha ection in it 12-pin connector. Generic Type Liquid/Dry Liquid/Dry Liquid/Dry Liquid/Dry Y1 Implent Height Section 7-12 Product 4 (12- pin) CANBUS Terminator / Next Component Product 2 (12- pin) Product 3 (12- pin) John Dee CANBUS 5 length Section 1-6 Product 1 (12-pin) Commonly Orded With: Y1 nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) Y1 14-pin 6 Section nal Cable (6 ection, flow turn, pu) Page 8 Revied: 2/6/2017

9 47-Pin to 1 Product (47 to 37-pin Adapter) 47- Pin Adapter Y2 Thi harne plug into the John Dee 47 Pin and connect to a ingle product uing a 37-pin connector. Ue when connecting a to an exiting yt with 37-pin connector. Alo ue when connecting to a Raven 37-pin final harne. John Dee 47-pin Profile: Generic, Liquid Fert Tool, NH3 Type Section Product 1: Liquid/NH Product 2: None Product 3: None Product 4: None Alo connect: Implent lift witch Implent Height Product 1 (37-pin) t Page 9 Revied: 2/6/2017

10 47-pin NH3 2 Product Adapter Harne Y1 Thi harne plug into the John Dee 47-pin and connect to two product. Product 1 i a 37 pin for NH3 only; thi work gat for a Raven NH3 yt with 37-pin final harne or an older yt that ued the 37-pin to connect to the pviou GenStar Rate Controller. Product 2 i alo a 37-pin connector for adding a liquid product. John Dee 47-pin ECU Middle 23-pin Y1 John Dee 47-pin Thi harne plug into the John Dee 47-pin and connect to two liquid product. Both ue the 37-pin connector found on older harnee. Thi harne i typically ued for trofit of a with exiting yt. (47 to dual 37-pin Adapter for NH3) Implent Height Implent Height Profile: NH3 Type Section Product 1: NH3 1-8 Product 2: Liquid 7-12 Product 3: None Product 4: None Alo connect: Implent lift witch Product 1 (37-pin) for NH3 Product 2 (37-pin) for Liquid 47-pin Dual Liquid 2 Product Adapter Harne Profile: Generic Type Section Product 1: Liquid 1-8 Product 2: Liquid 7-12 Product 3: None Product 4: None Alo connect: Implent lift witch Product 1 (37-pin) for Liquid 47- Pin Adapter (47 to dual 37-pin Adapter for 2 Liquid) t Product 2 (37-pin) for Liquid Page 10 Revied: 2/6/2017

11 47-pin NH3 2 Product Adapter Harne Y1 Thi harne plug into the John Dee 47-pin and connect to two product. Product 1 i a 37 pin; thi work gat for a Raven NH3 yt with 37-pin final harne or an older yt that ued the 37-pin to connect to the pviou GenStar Rate Controller. Product 2 ue the 12-pin liquid/dry product connector which work for adding a liquid or dry econd product. One common ue of the harne i adding a Catalyt or Spartan yt for nitrogen tabilizer to work with an exiting Raven NH3 yt. John Dee 47-pin Commonly Orded With: Profile: NH3 Type Section Product 1: NH3 1-6 Product 2: Liquid / Dry 7-8 Product 3: None Product 4: None Alo connect: Implent lift witch Implent Height 47- Pin Adapter Product 2 (12-pin with Section 7&8) Product 1 (37-pin) for NH3 t Y1 12-pin nal Cable for Tower with 1-2 Section Valve (pwm, flow, p., ec 1-2, fill flow) Y1 12-pin nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) Page 11 Revied: 2/6/2017

12 47-pin NH3 2 Product Adapter Harne Y1 Thi harne plug into the John Dee 47 Pin and the middle 23-pin connector on the ECU. Product 1 i for NH3 control only. Thi cable i only for NH3 yt with 0-3 ection valve. Product 2 can be any dry or liquid product with up to 6 ection. John Dee 47-pin ECU Center 23-pin Commonly Orded With: (1-3 NH3 Section) Product 1 NH3 (12- pin) with Section Y1 or Y1 12-pin nal Cable for Torpedo NH3 t Y1 or Y1 12-pin nal Cable for Raven NH3 t Y1 12-pin nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) Y1 14-pin 6 Section nal Cable (6 ection, flow turn, pu) 47- Pin Adapter Profile: NH3 Type Section Product 1: NH3 1-3 Product 2: Liquid/Dry 7-12 Product 3: None Product 4: None Alo connect: Implent lift witch Implent Height Section 7-12 Product 2 (12-pin) t Page 12 Revied: 2/6/2017

13 47- Pin Adapter 47-pin NH3 2 Product Adapter Harne Y1 Product 1: Product 2: Product 3: Product 4: Alo connect: Implent lift witch Section NH3 Type NH3 Liquid/Dry None None Product 2 can be any dry or liquid product with up to 6 ection. Profile: t Thi harne plug into the John Dee 47 Pin and the middle 23-pin connector on the ECU. Product 1 i for NH3 control only. Thi cable i for NH3 yt with 4, 5 or 6 ection valve. It will work on NH3 yt with 1-3 ection, but ee 3495Y1 for a impler cable pecifically deigned for NH3 yt with 1-3 ection. Implent Height Section 7-12 Product 2 (12-pin) John Dee 47-pin ECU Middle 23-pin Product 1 NH3 (12-pin) Section 1-6 Commonly Orded With: Y1 12-pin nal Cable for Torpedo NH3 t (ctrl valve, mater valve, flow, p.) Y1 12-pin nal Cable for Raven NH3 t (ctrl valve, mater valve, flow, p.) Y1 12-pin nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) Y1 14-pin 6 Section nal Cable (6 ection, flow turn, pu) Y1 14-pin 6 Section Raven Valve nal Cable (6 ection, flow turn, pu) 3463Y1 and 3607Y1 work for both liquid and NH3 ection valve Page 13 Revied: 2/6/2017

14 47-pin to 1 Liquid/Dry Product Y1 Thi harne plug into the John Dee 47 Pin and connect to one 12-pin liquid or dry final cable for product control. It ha one 14-pin ection connector with ection 1-6. John Dee 47-pin Commonly Orded With: Implent Height Y1 12-pin nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) Y1 14-pin 6 Section nal Cable (6 ection, flow turn, pu) 47- Pin Adapter Profile: Generic, Liquid Fert Tool Type Section Product 1: Liquid/Dry 1-6 Product 2: None Product 3: None Product 4: None Alo connect: Implent lift witch Section 1-6 Product 1(12-pin) t Page 14 Revied: 2/6/2017

15 47-pin to 2 Liquid/Dry Product Y1 Thi harne plug into the John Dee 47 Pin and connect to two 12-pin liquid or dry final cable for product control. It ha two 14-pin ection connector; the firt with ection 1-6 and the econd with ection John Dee 47-pin Commonly Orded With: Implent Height Y1 12-pin nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) Y1 14-pin 6 Section nal Cable (6 ection, flow turn, pu) Profile: Generic Type Section Product 1: Liquid/Dry 1-6 Product 2: Liquid/Dry 7-12 Product 3: None Product 4: None Alo connect: Implent lift witch Product 1 (12-pin) Section Pin Adapter Product 2 (12-pin) Section 1-6 t Page 15 Revied: 2/6/2017

16 47- Pin Adapter 47-pin to 2 Liquid/Dry Product w/ 16 Section Dual LiquiShift w/ 8 Section for each product Generic Type Liquid/Dry Liquid/Dry None None Section Profile: Y1 t Product 1: Thi harne plug into the John Dee 47 Pin and connect Product 2: to two 12-pin liquid or dry final cable for product Product 3: control. It ha two 14-pin ection connector along with Product 4: 2 -pin connector with the extra 2 ection ignal. The firt Alo connect: 14-pin ha ection 1-6; a 2-pin connector ha ection 7 & Implent lift witch 8. The econd 14-pin ha ection 9-14; a 2-pin connector then ha ection 15 & 16. Thi harne i pecifically deigned to operate a LiquiShift valve tack with 8 ection. When uing a ingle product LiquiShift you can turn product two off or ue it to control a non-liquishift application. Implent Height John Dee 47-pin Section (2-pin) Section 9-14 Product 2 (12-pin) Product 1 (12-pin) Section 1-6 Section 7-8 (2-pin) Commonly Orded With: Y1 12-pin nal Cable for Liquid Pump t (pwm, flow, p., pump rpm, fill flow) 8 Section LiquiShift t Page 16 Revied: 2/6/2017

17 Y1 nal Product Harnee nal Cable for Liquid Pump t Product Connector (12-pin Shroud) t 10 Length Ue thi final harne with Tower, PumpRight, Spartan and other yt. It attache to the 12-pin product connector for any product 1-5 on the. Order one of thee harnee for each liquid yt on the implent. Pump RPM Pu Flowmeter ll Flow Meter PWM Flow Adapter Amp pereal to MP150 Flowmeter Y1 Ue thi to adapt the new pereal flow connector (ued on 3462Y1 above) to an older meter or a Micro-Trak flowmeter that ue a MetriPack 150 connector. meter that qui thi adapter have a gray platic body with a blue ticker. Page 17 Revied: 2/6/2017

18 Y1 nal Product Harnee nal Cable for Tower with 1 or 2 Section Valve t For 3 or mo ection Catalyt yt ue the tandard liquid harneing. Ue thi final harne with Catalyt yt. It attache to the 12-pin product connector. Thi harne can alo be ued for any Tower Electric Pump t with 1 or 2 ection valve; thi will eliminate the need for the Y1 6-ection harne. Product Connector (12-pin Shroud) Flowmeter 10 Length PWM Pu Section 1 ll Flow Meter Section 2 Flow Adapter Amp pereal to MP150 Flowmeter Y1 Ue thi to adapt the new pereal flow connector to an older meter or a Micro-Trak flowmeter that ue a MetriPack 150 connector. meter that qui thi adapter have a gray platic body and a blue ticker on th Y1 Page 18 Revied: 2/6/2017

19 nal Product Harnee Torpedo NH3 nal Harne Y1 Ue thi final harne with Torpedo for NH3 Application. Thi harne mut be ued in conjunction with a JDRC adapter harne pecifically labeled for NH3 control on product 1; NH3 i alway product 1 on the. t Thi harne by itelf i gat for a ingle ection NH3 yt with no ection valve. It can alo be combined with a 6 ection final harne for a yt with up to 6 NH3 ection valve. NH3 Connector (12-pin Tower) Mater on/off valve 10 Length Control Valve Flowmeter Pu Page 19 Revied: 2/6/2017

20 nal Product Harnee Torpedo NH3 nal Harne with 3 Section Valve Connector Y1 Ue thi final harne with Torpedo for NH3 Application. Thi harne mut be ued in conjunction with a JDRC adapter harne pecifically labeled for NH3 control on product 1; NH3 i alway product 1 on the. NH3 Connector (12-pin Tower) Flowmeter Pu Section 1,2,3 Mater on/off valve Control Valve 10 Length t Thi harne i pecifically deigned for NH3 yt with 2 or 3 ection valve. The ection valve connector a included in thi cable o a 6 ection final cable i NOT needed. Commonly Orded With: Pin Weatherpack extenion harnee from 5-50 feet. Order length quid to ach each ection valve from the Torpedo mounting location. Page 20 Revied: 2/6/2017

21 nal Product Harnee nal Cable for Dry Fertilizer t Y1 Product Connector (12-pin Shroud) PWM Ue thi final harne to connect to dry fertilizer application yt. The PWM connector i a MP150 2-pin tower; thi connect to and other hydraulic valve olenoid. The Meter RPM Senor i a 3-pin WP Shroud; thi connect to the Dickey John 360 pule haft rpm enor. The aux RPM ignal i a 3-pin WP Tower; thi connect to the hydraulic motor peed enor. The aux RPM ignal can alo be ued to monitor a pinner or fan rpm with the proper enor or adapter. Meter RPM Senor 10 Length t Aux RPM (Motor, Fan or Spinner RPM) Dry Fertilizer t Component Hydraulic valve lited below have a bypa valve and load ene port to allow for flexibility in plumbing the hydraulic yt. Open the valve to allow bypa if plumbing in erie with other component. Cloe the valve if plumbing in parallel or uing power-beyond hydraulic. Port a marked with tamped letter to make plumbing a eay a poible. Valve and Motor 165-P15618A-3 Standalone Hydraulic PWM Valve Maximum Flow: 25 GPM Pu and Controlled Flow -12 SAE O-Ring Bypa -8 SAE O-Ring (optional) Load Sene -6 SAE O-Ring (optional) 164-FTA CID Hydraulic Motor with PWM Valve Rotation: Clockwie Shaft: 1 Maximum Speed: GPM Pu and Tank Port -8 SAE O-Ring Load Sene -6 SAE O-Ring (optional) Shaft Senor S1 360 pule / v fully encloed haft enor with 3-pin WP Tower Ue for Meter RPM Senor on harne above Dickey John 360 pule/v encoder coupler - mount to 1" haft Gear or Sproket Tooth Senor Nickel Plated Full Thad Senor w/ L Mounting Bracket. Senor ha WP Shroud connector on enor for Aux RPM Connection above (WP Tower x WP Tower adapter harne included to connect to Meter RPM Senor on harne above) Page 21 Revied: 2/6/2017

22 nal Product Harnee 6 Section Harne Y1 Ue thi final ection harne with Tower, PumpRight, Torpedo and other yt. It attache to the 14 Pin Section Connector and i ued to control 6 ection valve on the. The firt harne connected will control ection 1-6. The econd harne connected will control ection Section 7-12 a typically aigned to a econd product, but may alo be configud to be additional ection on the firt product. t Thi harne alo control ection valve for an NH3 yt. On the NH3 yt will alway be product 1 and will ue ection 1-6 Note, although thi harne ha a flow turn valve connector, in many configuration on the, the flow turn valve IS NOT upported. The flow turn valve will work in Liquid Fertilizer Tool configuration; thi configuration only allow a ingle product to be controlled. Thefo, at thi time, flow turn valve i not available for ue on multiple product yt on the. 14-pin ection connector 10 Length Flow Return Pu Section 1-6 / Section Harne w/ Raven Connector Y1 Thi harne function identically to the 3463Y1 harne pictud above but ha connector for Raven component. It ha the 14-pin connector to connect to adapter harne, then it ha 7 Raven round 4pin connector for 6 ection valve plu 1 flow turn valve and a 3-pin round Raven pu connector. Page 22 Revied: 2/6/2017

23 nal Product Harnee 2-8 Section LiquiShift t LiquiShift i compatible and improved for the John Dee Rate Controller Now, all the LiquiShift electrical component a mounted on the LiquiShift valve tack. Thi make intallation and troublehooting eaier by providing a impler yt. The manual override witche a mounted on the top of the valve tack, o no mo earching for the A & B Manual witche in the harne. Alo, harneing i implified Override witche becaue the 14-pin ection connector on any Y1 t JDRC adapter harne jut plug into the 14-pin LiquiShift connector. Section 7-12 Section 1-6 MultiTube Controller (now mounted on back of LiquiShift valve tack) Connection to A & B Manual Override Switche 14-pin to LiquiShift The 14-pin ection connector on any Adapter Harne can plug into the LiquiShift 14-pin. With the 3467Y1 harne above, you would plug Section 1-6 connector to the LiquiShift for product 1 LiquiShift. You would plug the Section 7-12 connector to the LiquiShift for product 2 LiquiShift. Product 1 only, product 2 only, or both product 1 & 2 could ue LiquiShift Y1 Manifold Controller (14 & 8-pin In, 23-pin Out) Y1 MultiTube Controller Y1 4 Section 23-Pin LiquiShift Valve Stack Cable (A1-A4, B1-B4, p, flow turn) Y1 6 Section 23-Pin LiquiShift Valve Stack Cable (A1-A6, B1-B6, p, flow turn) Y1 8 Section 23-Pin LiquiShift Valve Stack Cable (A1-A8, B1-B8, p, flow turn) 2-pin (only ue for ection 7-8) Manifold Controller B Valve Pu & Flow Return A Valve Page 23 Revied: 2/6/2017

24 nal Product Harnee Single Section LiquiShift t MultiTube Controller t Single Section LiquiShift provide the ame variable rate technology, it i jut implified to eliminate the ection control. Single A and B valve will open to allow flow to the full width of the implent. Single ection LiquiShift may or may not ue the LiquiShift valve tack mounting depending on pecific yt layout Y1 Connection to A & B Manual Override Switche 14-pin to LiquiShift Section 7-12 Section 1-6 B Valve Y1 Single Section LiquiShift Harne with 14pin input (MultiTube Controller 8-pin, A&B Valve Output, Pu) Y1 MultiTube Controller The 14-pin ection connector on any Adapter Harne can plug into the LiquiShift 14-pin. Single Section LiquiShift eliminate the Manifold Controller found in multiple ection LiquiShift yt. The A and B valve a controlled dictly by the MultiTube Controller. A Valve Pu Y1 12-Pin Product Connector to LiquiShift Adapter (1 or 2 Section Only) 14-Pin Connect to LiquiShift Ue thi adapter when you have a 12-Pin Product Connector but DO NOT have a 14-pin connector to attach to the LiquiShift. Thi adapter harne will only work with 1 or 2 ection LiquiShift yt. It WILL NOT WORK Connect to 12-pin with 3 or mo ection yt. product connector on main harne Page Pin Connect To Pump nal Harne Revied: 2/6/2017

25 Baic nal Cable for Raven Liquid or Dry Fertilizer t Raven Connector nal Product Harnee Y1 10 Length t With multiple product control on the many cutomer may wih to control an exiting yt along with an additional new application yt. Thi harne will allow th to ue new JDRC 2000 adapter harnee with 12-pin Liquid/Dry Product Connector and connect to Raven meter and PWM valve. It can connect to a Raven liquid flowmeter or the Raven haft rpm enor for dry application. The PWM valve connector i identical to the PWM connector o thi harne i compatible with both Raven and hydraulic PWM valve. Thi harne ha a built-in converter to upply 5 volt to the Raven meter with a 12 volt input from the Adapter Harne. Liquid/ Dry Product Connector Raven Flowmeter or Shaft RPM Senor Raven or PWM (12-pin Shroud) Page 25 Revied: 2/6/2017

26 nal Cable for Raven NH3 t Y1 Raven Connector nal Product Harnee With multiple product control on the many cutomer may wih to control an exiting yt along with an exiting Raven NH3 t. Thi harne will allow th to ue new adapter harnee with 12-pin NH3 Product Connector and connect to Raven NH3 component. It connect to flowmeter, mater valve, control valve, and pu enor all with Raven connector. Thi harne ha a built-in converter to upply 5 volt to the Raven flowmeter with a 12 volt input from the JDRC 2000 Adapter Harne. t Mater on/off valve 10 Length Flowmeter Pu NH3 Connector (12-pin Tower) Control Valve nal Cable for Raven NH3 t w/ up to 3 ection valve Y1 The Y1 harne i identical to the 3590Y1 harne pictud above with the addition of 3 ection valve connector. It will work with Raven NH3 component, upplying 5 volt to the flowmeter. The 3 ection valve connector will ue the Raven 4-pin round connector (ame connector a mater valve connector pictud above). Commonly Orded With: Pin Raven Con-X-All valve connector extenion harnee from 5-40 feet. Order length quid to ach each ection valve from the NH3 cooler mounting location. Page 26 Revied: 2/6/2017

27 Extenion, Adapter and Other Application t Component t Thi kit will mount the ECU to any 5-8 bar. Hardwa i alo included to bolt the ECU to the bracket. (The John Dee Rate Controller bundle DOES NOT include the mounting bracket). Mounting Bracket Kit Page 27 Revied: 2/6/2017

28 Extenion, Adapter and Other Implent Height Switche Mercury Switch t Mercury Switch with Magnetic Mount 30' cable, 2-pin WP hroud for Mercury Switch with EPDM Clamp and 30 cable, 2-pin WP hroud for (no magnet and bracket) The mercury witch i the implet mot liable height witch poible. Mount it to any it with ome rotation a it i raied and lowed on the implent. 30 of cable i built into the witch. The witch i cloed when the wi on the witch point down, ignaling the implent i down. All harnee for the include the Implent Height Switch (2-pin WP) connector. The height witch i REQUIRED FOR NH3 application, and optional for all other application configuration. logic i witch cloed = implent down; witch open = implent up. nger Style Switch A finger tyle witch i a gat choice for eay intallation. The witch i normally cloed; mount to deflect the pring-loaded finger when the implent i raied. (Switch polarity can be vered in the field by moving connection terminal.) nger Type Height Switch with Magnetic Mount (30 cable, 2-Pin WP Shroud for ) nger Type Height Switch Without Magnetic Mount (30 cable, 2-Pin WP Shroud for, no bracket) Button Switch for John Dee Planter Row Unit Thi witch i very imilar to the factory witch ued on John Dee planter row unit. If applying on a planter, you can mount a econd witch on another row unit for height witch input. Bracket included for the hort or long parallel linkage in the kit. Switch ha 6 cable; add 2-pin WP extenion to ach the location. The witch i normally cloed ignaling implent down Puh Button Switch for Short Parallel Linkage on JD Planter mut add 2 Pin WP extenion Puh Button Switch for Long Parallel Linkage on JD Planter mut add 2 Pin WP extenion pin Weatherpack extenion, 5-30 feet Page 28 Revied: 2/6/2017

29 Extenion, Adapter and Other ll Flowmeter ll Flowmeter Kit t fill flowmeter kit ue electromagnetic meter for accurate flow meaument with no moving part. Thi provide much improved liability over any flowmeter with moving part. The ha a new option to intall a fill flowmeter that will automatically meau the amount of fertilizer or other liquid you add to your tank. The tank level on your in-cab diplay will alway be up to date and corct without uer input each time the tank i filled. The fill flowmeter connector i a 4-pin pereal connector included on final product cable. 2 Electromagnetic ll Flowmeter Kit w/ 2 Full Port Manifold Flange Connection (300 pule / 10 gallon) 3 Electromagnetic ll Flowmeter Kit w/ 3 Manifold Flange Connection (130 pule / 10 gallon) Pin pereal ll Flowmeter Extenion The fill flowmeter connector i a 4-pin pereal Tower. Order quid extenion (not included in kit above) to ach from the fill flowmeter mounting location to the liquid product final harne with the 4-pin fill flowmeter connector Y1 10 feet Y1 20 feet Y1 30 feet Y1 5 feet 40 feet Y Y1 50 feet ll Flowmeter Adapter Cable The 2 and 3 fill flowmeter include a cable ( Y1) that attache to the flowmeter and ha a 3-pin MP150 connector. The adapter below (alo included in above kit) convert from the 3-pin MP150 to the 4-pin pereal connector ued for fill flowmeter connection to the product harne Y1 Adapter Cable 3-pin MP 150 Tower Flowmeter to 4-pin pereal Shroud ll Flowmeter Connector (Included in fill flowmeter kit above) Page 29 Revied: 2/6/2017

30 Extenion, Adapter and Other ISO and CANBUS Extenion Harnee 20 feet Y1 30 feet Y1 40 feet Y1 50 feet Y Y1 10 feet t Front ISO extenion ha a large round 9-pin ISO connector and a 3-pin mater witch connector to plug into the tractor. The other end of the harne ha the John Dee CAN Bu connector; a 12-pin ISO connector and a 2-pin power connector. Thi harne alo work to connect the ISOBUS Sentinel ECU harne to the 9-pin ISO connector on the tractor. John Dee Front ISO Extenion John Dee Center ISO Extenion Thee harnee extend the John Dee CAN wiring to connect a controller or other CAN component. A ingle harne ha both the 12-pin CANBUS connector and the 2-pin high curnt power connector in a ingle braided harne Y1 20 feet Y1 10 feet Y1 30 feet Y1 40 feet ISOBUS Y Harne Split the tractor ISOBUS connector into two implent ECU connector for intallation of two ISOBUS yt Y1 ISOBUS Y Page 30 Revied: 2/6/2017

31 Extenion, Adapter and Other Electric Pump Extenion Harnee 12 Volt Power Harne w/ Anderon Connector Cable with large ring terminal connect dictly to battery power; 40 amp fue i built into the cable. The key witch option cable ha a built in lay which will hut off power when the key witch i turned off. 18 wi included to connect to keyed power ource. 20 feet Y1 Anderon 40A EPD Power Cable - 20' - 6 AWG 20 feet Y1 Anderon 40A EPD Power Cable 20' with lay and key witch option 10 AWG Y1 10 AWG 10 feet Y1 8 AWG 20 feet Y1 8 AWG 30 feet 40 feet 50 feet 60 feet Y1 6 AWG Y1 6 AWG Y1 6 AWG Y1 6 AWG Ue thee extenion when operating any type of electric pump yt. ue heavy duty connector and heavy gauge wi to minimize voltage drop. Uing lighter wi or poor connector will caue probl with electric pump and electric pump driver Y1 1 foot 5 feet t 12 Volt Power Extenion w/ Anderon Connector 12 Volt Electric Pump Driver (EPD) w/ Anderon Connector PWM EPD (Anderon connector) Y1 Y Cable Anderon In x Two MP480 Out to pump Anderon In x One MP480 Out to pump High Curnt Power In Power Diagnotic Port Y PWM Signal In Power Out to Pump() Page Y Y1 Revied: 2/6/2017

32 Extenion, Adapter and Other 2 and 3-pin Extenion Harnee feet feet feet feet feet 2 Pin Metripack 150 Extenion (PWM Signal) Y1 10 feet Y1 15 feet Y1 20 feet Y1 25 feet Y1 30 feet Y1 5 feet t 2 Pin Weatherpack Extenion (John Dee Implent Height Switch) 3 Pin pereal Extenion ( Flowmeter w/ molded in connector, begin 2016) Ue for extending flowmeter connection on new flow10 feet Y1 20 feet Y1 30 feet Y1 40 feet Y1 50 feet Y1 meter with black body and orange decal Y1 5 feet 3 Pin Weatherpack Extenion (Section Valve Extenion) feet feet The 3-pin WP i a very common on/off valve connector. Ue when extending to ach a valve mounting location. An example i for aching NH3 ection valve, which a typically mounted with the NH3 manifold acro the implent. Alo ued on haft encoder for planter drive and dry fertilizer meter. 5 feet feet feet feet feet feet feet 3 Pin Metripack 150 Extenion (Pu Extenion, P-2016 flowmeter extenion) Ue thee extenion if flowmeter or pu enor a mounted away from the pump or heat exchanger location. Work with older flowmeter with gray body and blue decal. 5 feet feet feet feet feet feet Page 32 Revied: 2/6/2017

33 Extenion Harnee Extenion, 4-Pin Raven On/Off Valve Extenion 10 feet Y1 20 feet Y1 30 feet Y1 40 feet Y1 Ued to extend to ach a Raven on/off valve. Thee extenion a for the round 4-pin Con-X-All ued on Raven on/off valve. A common application i on NH3 yt whe ection valve a placed with each manifold and qui an extenion from the main harne Y1 5 feet 12-Pin Deutch ( Product Harnee) 10 feet Y1 20 feet Y1 30 feet Y1 40 feet Y1 50 feet Y1 On the harnee, ue the 12-pin Deutch connector for Liquid, Dry and NH3 Product (NH3 i vered gender from liquid/dry connector but ue the ame extenion). Mot final harnee a 10 feet long. Ue thee extenion to extend from the ECU to the pump mounting location when mo than 10 feet of cable i needed. t Y1 5 feet 14-Pin Deutch ( Section Harnee) 10 feet Y1 20 feet Y1 30 feet Y1 40 feet Y1 50 feet Y1 On the harnee, ue the 14-pin Deutch connector for ection valve. The ection valve cable i 10 feet long. Ue thee extenion when you need mo than 10 feet of cable from the ECU to the ection valve location. Alo ue thee to connect the 14-pin ection connector to the LiquiShift valve tack Y1 5 feet 5 feet 47-Pin Deutch ( Adapter Harne Connector) Y1 10 feet Y1 20 feet Y Y1 40 feet Y1 30 feet 50 feet On the John Dee PFA10680 harne a 47-pin connector i ued. Thee extenion harnee will extend that connector when the ECU i mounted away from all the application yt component Y1 Dut Cap Dut Cap for Liquid/Dry 12-Pin Product Connector - Deutch 12-Pin DT04-12P Y1 Dut Cap for 14-Pin Section Connector - Deutch 14-Pin HDP SE Y1 Page 33 Revied: 2/6/2017

34 Extenion, Adapter and Other Flowmeter Adapter Harnee Flowmeter with MP150 connector to perseal connector on harne Y1 Ue thi to adapt the new pereal flow connector on a final harne to an older meter or a Micro-Trak flowmeter that ue a MetriPack 150 connector. meter that qui thi adapter have a gray platic body and a blue ticker on th. Ue thi adapter to connect a new meter with integral pereal connector (black body with orange ticker) to a harne with 3-pin MP150 flow connector. t Flowmeter with pereal connector to MP150 connector on harne Raven Flowmeter Adapter Harnee Raven Flowmeter with 3-pin round connector to perseal connector on harne Y1 Ue thi to connect a Raven Flowmeter or Meter RPM Senor with the Raven 3-pin round connector to a harne with pereal connector. Thi harne include voltage gulator to upply the Raven flow or rpm enor with 5 volt and mut be plugged into a 3-pin pereal harne connector with 12 volt. Raven Flowmeter with 3-pin round connector to MP150 connector on harne Y1 Ue thi to connect a Raven Flowmeter or Meter RPM Senor with the Raven 3-pin round connector to a harne with MP150 flow connector. Thi harne include voltage gulator to upply the Raven flow or rpm enor with 5 volt and mut be plugged into a 3-pin MP150 harne connector with 12 volt. Page 34 Revied: 2/6/2017

35 Note: t Page 35 Revied: 2/6/2017

36 t t, Inc Hwy 25 Atwood, KS Phone: Toll Fe: Fax: ag.com