AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
|
|
|
- Denis Marsh
- 5 years ago
- Views:
Transcription
1 AS-i 3.0 Gateways AS-i 3.0 Gateways 2 / 1 AS-i Master, Slave 1 AS-i Safety Monitor for 2 s Operation using a single Monitor! Monitor processes safety slaves on two s Coupling between the two networks superfluous Up to 32 release circuits up to 6 CAT4, SIL 3 safe output circuits on the Monitor safe relays or fast Safe AS-i outputs are supported up to 32 independent AS-i outputs Multiple safe AS-i outputs possible via a single AS-i address Applications up to category 4/PLe/SIL 3 (Figure similar) Chip card for storage of data AS-i Power24V capable 1 The device can be operated directly on a 24V (PELV) power supply with integrated data coupling coils and adjustable self-resetting fuses for safe use also of powerful 24V power supplies 1 BWU2602, BWU2793, BWU2822 Figure Type Inputs safety, expandable to Outputs SIL 3, cat. 4 Safety outputs, independent according to SIL 3, expandable to Safety communication Number of s, number of AS-i Master 1 1 power supply, 1 gateway for 2 s, inexpensive power supplies 2 Diagnostic and interface 3 Article no. Safety, max in max. 6 release 6 x fast max. 32, max. 992 in max. Safe Link BWU2822, max in max. max. 32, max. 992 in max. Safe Link BWU2602 Safety max. 31 x 2, max in max 6 release 6 x fast max. 31, max. 991 in max. Safe Link 1, BWU2793 BWU2202 BWU release 2 x 2 relay BWU We reserve the right to change any data Mannheim, 4. page 1
2 AS-i 3.0 Gateways Figure Type Inputs safety, expandable to Outputs SIL 3, cat. 4 2 release 2 x 2 relay 2 release 2 x 2 relay Safety outputs, independent according to SIL 3, expandable to 1 Number of s, number of AS-i Master: Safety devices: "Single Master": 1, 1 AS-i Master. "Double Master": 2 AS-i Masters. "Optional AS-i Safety coupling circuit": 1 AS-i Master. no, max. 8 A/, redundant supply no, max. 8 A/, redundant supply no, max. 8 A/, redundant supply BWU2002 BWU2001 BWU2003 BWU2004 BWU2187 BWU power supply, 1 gateway for inexpensive power supplies: "": Cost-effective power for 2 s with 1 power supply (optionally supply of multiple Single Gateways by 1 power supply). "no, max. 8 A/, redundant supply": 1 power supply per. Gateway is powered in normal operation from one of the two AS-i power supplies. Should one AS-i power supply fail, switching to the other AS-i power supply allows all the s functions to be maintained and the unaffected continues to operate. 3 Diagnostic and interface " ": Access to AS-i master and safety monitor via Bihl+Wiedemann proprietary software over s interface. "": Access to AS-i master and safety monitor via Bihl+Wiedemann proprietary software over interface and adapter cable. (GSD, GSDML,... file for the Gateway is built into the web server) Safety communication Number of s, number of AS-i Master 1 1 power supply, 1 gateway for 2 s, inexpensive power supplies 2 Diagnostic and interface 3 Article no. page 2 Mannheim, 4. We reserve the right to change any data
3 AS-i 3.0 Gateways Article no. BWU2001 / BWU2002 / BWU2003 / BWU2004 / BWU2202 / BWU2204 Interface BWU2187 / BWU2188 BWU2206 BWU2602 BWU2793 / BWU2822 interface according to IEC / IEC Baud rates 9,6 KBaud up to KBaud, automatic recognition DP functions imaging of the AS-i slaves as I/O data of the complete diagnosis and via the DP AS-i AS-i cycle time 150 μs * (number of slaves ) Operating voltage AS-i voltage 3 DC Display LCD menu, indication of slave addresses and error messages in plain text LED power power ON LED master recognized LED config error error LED U AS-i AS-i voltage o.k. LED AS-i active AS-i normal operation active LED prg enable automatic addresses programming enabled LED prj mode mode active LED AUX auxiliary power auxiliary power LEDs,,, (EDM/Start) LEDs K1... K4 state of inputs: state of outputs: state of inputs: state of outputs: LEDs SI1... SI6 state of inputs: LEDs SO1... SO6 state of outputs: UL-specifications (UL508) External protection an isolated source with a secondary open circuit voltage of 3 DC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. In general UL mark does not provide UL certification for any functional safety rating or aspects of the above devices. ctüvus the devices BWU2001 BWU2002 BWU2003 BWU2004 BWU2187 BWU2188 BWU2202 BWU2204 BWU2206 from Bihl + Wiedemann GmbH were safety certified by TÜV Rheinland of North America, Inc. according to UL-standards and meet the safety requirements for the North American market. Applied standards EN EN EN 62061:2005, SIL 3 EN 61508:2010, SIL 3 EN ISO :2008/AC:2009, performance-level e We reserve the right to change any data Mannheim, 4. page 3
4 AS-i 3.0 Gateways Article no. BWU2001 / BWU2002 / BWU2003 / BWU2004 / BWU2202 / BWU2204 BWU2187 / BWU2188 BWU2206 BWU2602 BWU2793 / BWU2822 Environment Housing stainless steel Operating temperature 0 C +55 C Storage temperature -25 C +85 C Protection category IP20 IEC Maximum tolerable shock according EN and vibration stress Voltage of insulation 50 Weight 800g Dimensions (W / H / D in mm) 100 / 120 / / 120 / 106 Article no. BWU2187 / BWU2188 / BWU2206 BWU2001 / BWU2002 / BWU2003 / BWU2004 / BWU2202 / BWU2204 / BWU2602 BWU2793 / BWU2822 Safety monitor Start delay < 10 ms Max. turn-off time < 40 ms Card slot Chip card for storage of data Input Inputs SIL3, Kat. 4 3 x 2 Inputs digital, EDM 4 up to 6 standard inputs Switching current statical 4 ma at 24 V, dynamic 30 ma at 24 V (T=100 μs) statical 4 ma at 24 V, dynamic 15 ma at 24 V (T=100 μs) Power supply out of AS-i out of AUX Tolerated test pulse adjustable Output Number of release circuits on the monitor Outputs relay outputs (output circuits 1 and 2), each 2 current paths max. contact load 1 : 3 A AC-15 at 3, 3 A DC-13 at 3 relay outputs (output circuits 1 and 2) max. contact load 1 : 3 A AC-15 at 3, 3 A DC-13 at 3 semiconductor outputs (output circuits 3 and 4) max. contact load: 0,5 A DC-13 at 3 semiconductor output max. contact load: 1,2 A DC-13 at 3, = 7,2 A in sum 2 Power supply out of AUX (semiconductor outputs) Test pulse (semiconductor outputs) 1 Protection via external fuse, max. 4 A semi time-lag. if output is on: minimum interval between 2 test pulses: 250 ms (as from Safety Version 4.3); maximum pulse width 1,5 ms if output is on: minimum interval between 2 test pulses: 250 ms; maximum pulse width 1 ms page 4 Mannheim, 4. We reserve the right to change any data
5 AS-i 3.0 Gateways 2 BWU2793, BWU2822 Derating output current 7,2 I AUX (max) [A] T amb [ C] Article No. master power supply, approx 300 ma out of Operating current master power supply, max. 300 ma out of AS-i circuit 1 (approx. 70 ma ma), max. 300 ma out of AS-i circuit 2 (approx. 70 ma ma); in sum max. 370 ma Version 1 gateway, 1 power supply, for 2 s, approx. 300 ma (PELV voltage) BWU2001 BWU2002 BWU2003 BWU2004 BWU2187 BWU2188 BWU2202 BWU2204 BWU2206 BWU2602 BWU2793 BWU2822 Redundant power supply out of AS-i: all fundamental functions of the device remain available even in case of power failure in one of the two s BWU2001 / BWU2003 / BWU2187 BWU2002 / BWU2004 / BWU2188 / BWU2202 / BWU2204 / BWU2206 BWU2602 / BWU2793 / BWU2822 Current measurement of the AS-i circuits Self-resetting adjustable fuses AS-i earth fault monitor distinguishes between AS-i cable and sensor cable In version 1 gateway, 1 power supply for 2 AS-i circuits : only 1 gateway + 1 AS-i power supply is needed for both 2AS-icircuits We reserve the right to change any data Mannheim, 4. page 5
6 AS-i 3.0 Gateways Safety outputs block diagram BWU2001, BWU2002, BWU2003, BWU2004, BWU2202, BWU2204, BWU V 0V Safety outputs block diagram BWU2187, BWU2188, BWU Safety outputs block diagram BWU2793, BWU V SO1 SO2 SO3 SO4 SO5 SO6 Variations of terminal BWU2793, BWU2822 Terminal Safe output Safe input for mechanical contacts in combination with T1, T2 Safe antivalent input Safe input Standard input SI1,2 SI3,4 SI5,6 SO1,2 1 SO3,4 1 SO5,6 1 1 If outputs are configured as inputs, the input current has to be limited by an external element at 100 ma page 6 Mannheim, 4. We reserve the right to change any data
7 AS-i 3.0 Gateways Connections: Gateway + Safety Monitor BWU2001 BWU2002, BWU2202, BWU V 24 V ASI 1 +PWR- (max. 8A) + ASI 2 + ASI 2 ASI 2 +PWR- (max. 8A) ASI +PWR- (max. 8A) BWU2003 BWU2004, BWU V 24 V ASI 1 +PWR (max. 8A) + ASI 2 +ASI 2 - / 24V 0V ASI 1 +PWR- (max. 4A) We reserve the right to change any data Mannheim, 4. page 7
8 AS-i 3.0 Gateways BWU2187 BWU2188, BWU ASI 1 +PWR (max. 8A) ASI ASI 2 - / 24V 0V ASI 1 +PWR- (max. 4A) BWU2793 Connection Description T2 SI2 SI4 SI6 SI1, SI3, SI5 Safe input terminal (T1) T1 SI1 SI3 SI5 SI2, SI4, SI6 Safe input terminal (T2) safe inputs/ standard inputs T1 Clock output 1 T2 Clock output 2 SO1... SO6 Safe semiconductor outputs V, 0V Power supply for local I/Os +ASI 1- Connection of AS-i circuit ASI +PWR- Power supply for Gateway and s SO5 24V SO1 SO2 0V SO3 SO6 SO4 ASI +PWR- (max. 4A) BWU2822 Connection Description SI1, SI3, SI5 Safe input terminal (T1) T2 SI2 SI4 SI6 T1 SI1 SI3 SI5 SI2, SI4, SI6 Safe input terminal (T2) safe inputs/ standard inputs T1 Clock output 1 T2 Clock output 2 SO1... SO6 Safe semiconductor outputs V, 0V Power supply for local I/Os +ASI 1-, +ASI 2- Connection of AS-i circuits ASI +PWR- Power supply for Gateway and s +ASI 2 SO5 24V 0V SO1 SO2 SO3 SO6 SO4 ASI +PWR (max. 8A) page 8 Mannheim, 4. We reserve the right to change any data
9 AS-i 3.0 Gateways Accessories: Safe contact expander, 1 or 2 independent (art. no. BWU2548 / BWU2539) ASIMON 3 G2 and AS-i Control Tools with serial cable for AS-i Masters/Monitors in stainless steel (art. no. BW2071) DP Master Simulator (art. no. BW1257) AS-i Power Supply 4 A (art. no. BW1649) / AS-i Power Supply 8 A (art. no. BW1997) For devices with interface: Software ASIMON 3 G2 and AS-i Control Tools (art. no. BW2501) We reserve the right to change any data Mannheim, 4. page 9
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways AS-i 3.0 Gateways 2 / 1 AS-i Master, Slave 1 AS-i Safety Monitor for 2 AS-i networks Operation using a single Monitor configuration! Monitor processes safety slaves on two AS-i networks
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via or AS-i 3.0 Gateways, safe via or 2 / 1 Master, / Slave AS-i Safety input slaves report via safe AS-i Safety output slaves switch via safe Up to 32 release circuits up to 6 CAT4, SIL 3 safe output
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways 2 / 1 AS-i Master, Slave 1 AS-i Safety Monitor for 2 s Operation using a single Monitor! Monitor processes safety slaves on two s Coupling between the two networks superfluous Up to 32
AS-i 3.0 EtherCAT Gateways with integrated Safety Monitor
AS-i 3.0 EtherCAT Gateways with 2 / 1 Master, EtherCat Slave 1 Safety Monitor for 2 s Operation using a single Monitor! Monitor processes safety slaves on two s Coupling between the two networks superfluous
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via BUS or NET AS-i 3.0 Gateways, safe via NET or BUS 2 / 1 Master, NET / BUS Slave AS-i Safety input slaves report via safe AS-i Safety output slaves switch via safe Up to 32 release circuits up
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
via PROFI or PROF AS-i 3.0 Gateways, via PROF or PROFI 22 / 1 Master, PROF / PROFI Slave AS-i Safety input slaves report via AS-i Safety output slaves switch via Up to 32 release circuits up to 6 CAT4,
AS-i 3.0 EtherNet/IP + Modbus TCP-Gateways with integrated Safety Monitor
AS-i 3.0 -Gateways 2 / 1 AS-i Master, -Slave 1 switch integrated up to 32 release circuits up to 6 release circuits SIL 3, cat. 4 on the Monitor Safe AS-i outputs are supported up to 32 independent AS-i
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via BUS or NET AS-i 3.0 Gateways, safe via NET or BUS safe and Safe Link in one device up to 450 devices 2 / 1 Master, NET / BUS Slave AS-i Safety input slaves report via safe AS-i Safety output slaves
AS-i 3.0 Gateways, PROFIsafe via PROFIBUS or PROFINET
safe via BUS or NET AS-i 3.0 Gateways, safe via NET or BUS safe and Safe Link in one device up to 450 devices 2 / 1 Master, NET / BUS Slave AS-i Safety input slaves report via safe AS-i Safety output slaves
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways 2 AS-i Masters, 1 PROFIBUS Slave Up to 32 release circuits up to 6 CAT4, SIL 3 safe output circuits on the Monitor safe relays or fast electronic safe outputs up to 32 independent AS-i
AS-i 3.0 PROFIBUS Gateways with integrated Safety Monitor
AS-i 3.0 Gateways AS-i 3.0 Gateways 2 / 1 Master, Slave 1 AS-i Safety Monitor for 2 AS-i networks Operation using a single Monitor configuration! Monitor processes safety slaves on two AS-i networks Coupling
AS-i 3.0 EtherNet/IP + Modbus TCP-Gateways with integrated Safety Monitor
AS-i 3.0 -Gateways 2 / 1 AS-i Master, -Slave (1) switch integrated Up to 64 release circuits up to circuits SIL 3, cat. 4 on the Monitor, relays or fast Safe AS-i outputs are supported up to 32 independent
AS-i 3.0 PROFINET-Gateways with integrated Safety Monitor
AS-i 3.0 PROFI Gateways with Master, 1 PROFI Slave Up to 32 release circuits up to 6 safe output circuits on the Monitor safe relays or fast electronic safe outputs up to 32 independent AS-i outputs Multiple
AS-i 3.0 Sercos Gateways with integrated Safety Monitor
AS-i 3.0 Sercos Gateways with Safety on Sercos and Safe Link in one device up to 456 Devices Safely monitoring safety drives with Safety on Sercos 2 / 1 AS-i master, Sercos slave switch integrated (figure
AS-i Safety Output Module with Diagnostic Slave, 1 EDM input, 3I and 2O
ext. in ext. in Safety Output Module with Safety and standard I/O in one module Electronic safety output Additional 3 standard inputs, 1 EDM input, 2 outputs IEC 61508 SIL 3, EN ISO 13849-1 PLe Cat 4,
Article no. BWU2045: AS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input 1.23 NC
Safety + standard I/O in one module AS-i Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category
AS-i Safety Relay Output Module with Diagnostic Slave and 1 EDM Input
Safety + standard I/O in one module Safety relay output with galvanically isolated contact sets, approved up to 230 V IEC 61508 SIL 3, EN ISO 13849-1/PLe Kat 4, EN 62061 SIL 3 Protection category IP20
AS-i Safety Relay Output Module with Diagnostic Slave, 1 EDM, 1 x 2 channel Safe Input
ext. in ext. in AS-i Safety Relay Output Module with Safety + standard I/O in one module Safety relay output with galvanically isolated contact sets, approved up to 230 V Additionally 1 EDM input, 1 x
AS-i Safety Input Modules (M12), IP67
Input Modules (), IP67 Input Modules (), IP67 for opto, floating contacts or complementary switch Applications up to category 4/PLe/SIL 3 (Figure similar) Figure Type Inputs, SIL 3, cat. 4 4 x, 4 x, 4
AS-i Safety Output Module, IP20
a AS-i Safety Output Module Safe outputs and standard inputs in one module Protection category IP20 Figure Housing Inputs digital Outputs Safety, SIL3, cat.4 Input voltage (sensor supply) 1 Output voltage
AS-i / IO-Link Module, IO-Link Master with 4 IO-Link Ports
/ IO-Link Module, /IO-Link Module, IO-Link Master with 4 s fourfold IO-Link Master in one housing Power supply of s (or ) (Figure similar) Figure Type Inputs digital 4 x + 4 x + 4 x Outputs digital M12
Encoder signal/ Sensor signal. Number of monitored axes. sine/cosine, SSI, TTL (1) up to 2 independent axes. sine/cosine. up to 2 independent axes
w AS-i Speed Monitor for sine/cosine encoder for HTL encoder for SSI encoder for TTL encoder for sensors for 2 fast electronic safe outputs 128 devices Supplied out of AS-i and external 24 V (figure similar)
Active Distributors ASi Safety, IP67
x connectors for profile cable Periphery connection via M8 cable sockets M cable sockets (Figure similar) Figure Type Inputs, SIL 3, Cat. 4 9 mm 9 mm 9 mm 9 mm channels channels channels channels Inputs
AS-i / IO-Link Module, IO-Link Master with 4 IO-Link Ports
/ IO-Link Module, /IO-Link Module, IO-Link Master with 4 s fourfold IO-Link Master single in one housing Power supply of s out of AUX (or ) Figure Type Inputs digital 8x M 8x M 4 x + 4 x + Outputs digital
AS-i Safety Analog Input Module, IP20
2 safe inputs in one module: 4... 20 ma or 0... 10 V or Pt100 or thermocouple (type J / K / N / R / S) Applications up to category 4/PLe/SIL 3 (figure similar) The AS-i Safety Input Module for analog inputs
Digital Modules AS-i, IP67, M12
Digital Modules, IP67, M1 x connectors for color LEDs per output, state (yellow), overload (red) BWU487 / BWU547 / BWU55 / BWU594 / BWU60 / BWU713 / BWU75 / BWU78 (Figure similar) BWU617 / BWU619 / BWU66
Analog Modules AS-i, IP67, M12
Analog Modules, M12 2 x 2 connectors for compact housing, IP67 (Figure similar) Figure Type Inputs analog Outputs analog M12 connection Input voltage (sensor supply) Output voltage (actuator supply) (2)
Active Distributors AS-i Safety, Active Distributors AS-i
Active Distributors Safety, Active Distributors x connectors for Periphery connection via, M cable sockets or push in terminals (Figure similar) Figure Type Inputs Safety, SIL, Cat. x 9 mm, -channels Safety
AS-i 3.0 motor module
3.0 motor module 3.0 motor module for two 4 V motorized rollers Itoh Denki (PM00ME/XE/XP, PM60ME/XE/XP) with 4 binary and analog outputs Mixed input/output slave Speed setting of parameter Protection category
Digital Modules AS-i in IP20, 22,5 mm
Digital Modules AS-i in 22,5 mm Cost efficient solution in IP20 (Figure similar) Figure Type Housing s digital digital voltage (sensor supply) (1) Output voltage (actuator supply) (2) AS-i connection (3)
AS-i 3.0 motor modules
AS-i 3.0 4I/4O modules for two 4 V motorized rollers e.g. Interroll (EC00, EC300 or EC30) or RULMECA (RDR BL-) or Rollex (type 840) with binary and analog outputs Mixed input/output slave Speed setting
AS-i 3.0 Motor modules
AS-i 3.0 motor modules for two 4 V motorized rollers e.g. Interroll (EC00, EC300, EC310) or RULMECA (RDR BL-) or Itoh Denki (PM00ME/XE/XP, PM60ME/XE/XP) slaves in one module 1 Single Slave with - s - digital
Analog Modules AS-i IP65, M12
Plug and Play as simply as digital AS-i I/O BWU1361 / BWU1362 / BWU1722 / BWU1853 / BWU1917 / BWU1363 / BWU2532 / BWU1359 / BW1360 / BWU1893 BWU1894 BWU1895 BWU1963 BWU1964 Housing, construction: IP65,
AS-i Safety Relay Output Module with Diagnostic Slave
AS-i Safety Relay Output Module with Diagnostic Slave User Manual...supports the requirements for AS-i Safety up to SIL3 Revision date: 2016-03-9 Subject to modifications without notice. Generally, this
AS-i Safety Relay Output Module with Diagnostic Slave
AS-i Safety Relay Output Module with Diagnostic Slave User Manual Revision date: 2013-01-30...supports the requirements for AS-i Safety up to SIL3 Subject to modifications without notice. Generally, this
PCB AS-i modules, board based solutions
Special variants on request (Figure similar) PCB modules, board based solutions Circuit Inputs board dimensions digital Inputs analog Outputs digital Connection Coated LED status display 4 Input voltage
System manual AS-i safety monitor AC041S /00 05/2013
System manual AS-i safety monitor AC041S UK 7390926/00 05/2013 Contents 1 Preliminary note...4 1.1 Symbols used...4 2 Safety instructions...5 3 Items supplied...6 4 Functions and features...6 5 Structure
Can be configured in the PNOZmulti Configurator Semiconductor outputs: or 4 safety outputs in accordance with EN 954-1, Cat. 3
Products Expansion Gertebild mo1p modules PNOZmulti Verwendung/Bildunterschrift_multi_Modul Expansion module for connection to a base unit from the configurable control system PNOZmulti Approvals Unit
MSR178DP. Description. Features. Specifications
MSR178DP Description The MSR178DP is a multi-function time-delay relay for use in safety circuits. It can be configured by the user to perform on-delay, offdelay or single-pulse modes. It is used for applications
Phone: Fax: Web: -
In automated systems, sensors and actuators must interact with one another functionally and safely. The necessary coordination is performed by the programmable Safety Controller. The controller monitors
AS-Interface Safety at Work
AS-Interface Safety at Work Safety Monitor, Coupling adjacent AS-i networks with the Safety Monitor provides the option of a cross-network E-Stop connection and a global restart, especially with large
CONFIGURABLE SAFETY RELAYS
CONFIGURABLE SAFETY RELAYS The cycle control function of the configurable MSI allows efficient semi-automatic processes Special features Single or double-cycle operation with 0 s / 0 min time monitoring
Pluto AS-i. Safety PLC. Approvals: Control of: Features:
Safety PLC Pluto AS-i Approvals: TÜV Rheinland Control of: Safety products in dynamic and static circuits as well as in AS-i networks Electrically controlled actuators such as contactors, valves, motors
QUINT-PS/ 1AC/24DC/ 5
Extract from the online catalog QUINT-PS/ 1AC/24DC/ 5 Order No.: 2866750 DIN rail power supply unit 24 V DC/5 A, primary switched-mode, 1- phase. The SFB technology (Selective Fuse Breaking Technology)
SECTION 16 LED DIAGNOSTIC FEATURES: EXPANSION UNITS: SCR-31P-i. SCR-73-i. SEU-31-i. SCR-31-42TD-i. SEU-31TD-i
SECTION 16 VIPER Safety Relays Type: SCR-i (with added diagnostics) SAFETY RELAY FUNCTION: IDEM s VIPER SCR-i range of Safety Relays have been designed in accordance with EN60204-1 for safety circuits
Product Overview. by Bihl+Wiedemann
Product Overview by Bihl+Wiedemann About Bihl+Wiedemann Bihl+Wiedemann GmbH, founded in 1992 by Jochen Bihl and Bernhard Wiedemann, is a highly specialized, internationally operating engineering company
CSI 6300 SIS Overview
Overview The Digital Overspeed Protection System is TÜV - certified according to IEC 61508:2010 and provides speed measurement and detection of rotational direction for rotating machines such as turbines,
4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type designation. TBPN-L1-FDIO1-2IOL Ident-No
PROFINET slave Integrated Ethernet switch 100 Mbps supported 2 x M12, 4-pin, D-coded, Ethernet fieldbus connection Glass fiber reinforced housing Shock and vibration tested Fully potted module electronics
EtherNet/IP. Integrated Ethernet switch 10 Mbps / 100 Mbps supported 2 x male M12, 4-pin, D-coded, Ethernet-Fieldbus
EtherNet/IP Integrated Ethernet switch 10 Mbps / 100 Mbps supported 2 x male M12, 4-pin, D-coded, Ethernet-Fieldbus connection Glass fiber reinforced housing Shock and vibration tested Fully potted module
4 non-safe digital I/O channels 2 IO-Link Master V1.1 slots. Figure 1. Figure 2. Type designation. TBPN-L1-FDIO1-2IOL Ident no
PROFINET slave Integrated Ethernet switch 100 Mbps supported 2 x M12, 4-pin, D-coded, Ethernet fieldbus connection Glass fiber reinforced housing Shock and vibration tested Fully potted module electronics
PSR-PC50. SIL 3 coupling relay for safety-related switch on. Data sheet. 1 Description
SIL 3 coupling relay for safety-related switch on Data sheet 105818_en_01 PHOENIX CONTACT 2014-08-18 1 Description The PSR-PC50 SIL coupling relay can be used for power adaptation and electrical isolation
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits User manual DP/V0 and DP/V1 AS-i 3.0 specification Revision date: 2008-10-22 Subject to modifications without notice. Generally,
Datasheet - CSS 11-30S-D-M-ST
12.02.2013-18:42:30h Datasheet - CSS 11-30S-D-M-ST Safety sensors / CSS 30S Preferred typ Stainless steel enclosure Max. 31 sensors can be wired in series. Connector M12, 8-pole Ø M30 High repeat accuracy
Quantum III. Compact DC Drive Package. Slitter DC Drive Package. Quantum III
Compact DC Drive Package The delivers a DC drive package that integrates the intelligence of the Mentor II with a space saving design that incorporates many accessories typically required in the North
G9SX-GS. Safety Guard Switching Unit. A Safety Measure for Hazardous Operations That Does Not Lower Productivity. Auto Switching Function
Safety Guard Switching Unit CSM DS_E_6_1 A Safety Measure for Hazardous Operations That Does Not Lower Productivity Two functions support two types of application: Auto switching: For applications where
Making Hazardous Operations Safe and Productive
NEW Safety Guard Switching Unit G9SX-GS Making Hazardous Operations Safe and Productive Making Hazardous Operations Safe and Productive This new addition to the model of Flexible Safety Unit G9SX series
ASI SAFETY & MESUREMENT. SG4-FINGER SERIES. APPlICATIONS
SAFETY FINGER PROTECTIONlIGhT CURTAINS SG4-FINGER SERIES The series of SAFEasy TM SG4-B FINGER safety light curtains widens the existing SG range, whilst representing an evolution of the SE4-PLUS line,
QUINT-PS/ 1AC/24DC/20/CO
Extract from the online catalog QUINT-PS/ 1AC/24DC/20/CO Order No.: 2320898 DIN rail power supply unit 24 V DC/20 A/CO, dip-coated circuit board, primary-switched, 1-phase. For the first time, SFB (selective
QUINT-PS/1AC/24DC/10. Extract from the online catalog. Order No.:
Extract from the online catalog QUINT-PS/1AC/24DC/10 Order No.: 2866763 DIN rail power supply unit 24 V DC/10 A, primary-switched mode, 1- phase. The SFB technology (Selective Fusebreaking Technology)
TwinSAFE Compact Controller
Controller EK1960 Compact Controller The EK1960 Compact Controller extends the application range of the integrated safety solution. Thanks to its compact design, with 20 safe digital inputs and 24 safe
SAFETY RELAY YRB-4EML-31S MAIN FEATURES
SAFETY RELAY TYPE 4 SAFETY PROTECTION DEVICE FOR SAFETY LIGHT CURTAINS/BARRIERS MAIN FEATURES For safety light curtains and access control barriers, emergency stop, door switch Safety Integrity Level (SIL)
to 12a Added Standard and Electrical requirements for UL table 1.1
Document changes and version status C-DIAS SAFETY DIGITAL INPUT MODULE CSDI 162 Change date Affected page(s) Changes/expansions/corrections Version 19.12.2013 12 to 12a Added Standard and Electrical requirements
E-STOP relays, safety gate monitors
Safety relay for monitoring E-STOP pushbuttons, safety gates and light barriers. Approvals Block diagram Unit features Positive-guided relay outputs: 6 safety contacts (N/O), instantaneous 4 auxiliary
SENSICK AS-i Components. Technical Description
SENSICK AS-i Components Technical Description AS-i Applications AS-i Applications Central control of complex processes in the packaging industry with AS-i. To Control System AS-i classic field modules
AS-Interface INSTALLATION GUIDE, TIPS AND TRICKS
AS-Interface INSTALLATION GUIDE, TIPS AND TRICKS AS-Interface Installation guide Tips and Tricks 2 Index AS-Interface General Features 4 AS-Interface Key Features 7 Selecting the Cable 8 Cable Routing
Original operating instructions Safety relay with relay outputs with and without delay G1502S / / 2016
Original operating instructions Safety relay with relay outputs with and without delay UK G50S 803638 / 00 0 / 06 Contents Preliminary note...4. Symbols used...4 Safety instructions...5 3 Items supplied...6
Technical data. Dimensions: see page 116. ): 4 kv Rated insulation voltage (U i Over-voltage category: Power supply. Rated operating voltage (Un):
Safety module CS AR-91, according to EN 81 Safety modules for the lift automatic floor levelling operation according to EN 81 Main functions For safety applications up to SIL 3 / PL e Choice between automatic
Power Supply HARTING pcon
HARTING pcon 2060 Advantages Compact design and high power density Easy installation and tool-less connection Wide input range for world-wide use Wide operating temperature range (up to 70 C without derating)
Original operating instructions. Fail-safe SmartPLC with Profinet slave interface AC402S /00 06/2016
Original operating instructions Fail-safe SmartPLC with Profinet slave interface AC402S UK 80237419/00 06/2016 Contents 1 Preliminary note...4 1.1 Notes on this document...4 1.2 Symbols used...4 2 Safety
Expansion Unit G9SX-EX Safety 2 Instantaneous safety outputs
Flexible Safety Unit / Safety Guard Switching Unit G9SX/G9SX-GS CSM_G9SX_G9SX-GS_DS_E_8_1 Logical Function Adds Flexibility to Various Safety Circuits Be sure to read the Safety Precautions on page 45.
Bul. 440R Guardmaster Safety Relays (DI, DIS, SI, CI, EM, and EMD) Selection Guide
Bul. 440R Guardmaster Safety Relays (DI, DIS, SI, CI, EM, and EMD) Selection Guide Description The new generation of Guardmaster Safety Relays addresses the broad scope of applications in the intricate
The safety control of the next generation
samos pro samos pro compact The safety control of the next generation With the highest power in the smallest space, the safety control samos pro compact sets new standards in the area of machine automation.
SAFETY & MESUREMENT SFIN A GER F OT T PR E. TION light CURTAINS EC Y SG4-FINGER SERIES. highlights
SFIN A GER F PR E OT T EC Y TION light CURTAINS SG4-FINGER SERIES The series of SAFEasy TM SG4-B FINGER safety light curtains widens the existing SG range, whilst representing an evolution of the SE4-PLUS
Industrial Safety Systems
DATA SHEET Industrial Safety Systems Modular Safety Controller Flexi Soft PDF processed with CutePDF evaluation edition www.cutepdf.com Modular safety controller Flexi Soft Safety controllers Overview
ASM1, ASM1E, ASM2E. AS-i Safety Monitor. Subject to change without prior notice. Technische Änderungen vorbehalten /02
ASM1, ASM1E, ASM2E AS-i Safety Monitor 50101229-2009/02 Technische Änderungen vorbehalten Subject to change without prior notice Information on the use of the connecting and operating instructions These
Online data sheet STR1-SASM03P5 STR1 NON-CONTACT SAFETY SWITCHES
Online data sheet STR1-SASM03P5 STR1 A B C D E F H I J K M N O P Q R S T Detailed technical data Features System part Sensor principle Ordering information Other models and accessories Number of safe outputs
Safety. Detection. Control. MAGNUS RFID ENG - REV
03 2017 1 Next generation RFID safety sensor 03 2017 2 03 2017 3 Next generation sensors for machine safety RFID safety sensors PL e, SIL 3 The application of Magnus RFID sensors can be extremely wide
Safety Control. FS1A Multi-function Safety Relay. Optional Parts. Connecting Tool. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide
Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed
For full product information, visit Use the SpeedSPEC Code for quick access to the specific web page.
Safety Relays G9SX-GS G9SXGS For full product information, visit www.sti.com. Use the SpeedSPEC Code for quick access to the specific web page. Safety Guard Switching Unit A safety measure for hazardous
Safety Control. FS1A Multi-function Safety Relay. Optional Parts. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide
Control Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed
ControlLogix SIL2 System Configuration
ControlLogix SIL2 System Configuration Using RSLogix 5000 Subroutines Application Technique (Catalog Numbers 1756 and 1492) Important User Information 8 / 2011 Solid state equipment has operational characteristics
TURCK Modular Industrial I/O PROFIBUS -DP Products
TURCK Modular Industrial I/O PROFIBUS -DP Products Piconet Gateways Rugged, Fully Potted Stations IP 67 Protection Small Footprint Automatic Baud Rate Sensing SDPL-0404D-0003 SDPL-0404D-0004 SDPL-0404D-1003
For full product information, visit Use the SpeedSpec code or scan the QR Code for quick access to the specific web page.
R Safety Monitoring Relays For full product information, visit www.sti.com. Use the SpeedSpec code or scan the QR Code for quick access to the specific web page. Dual-Channel Safety Monitoring Relay Power
Power Supply HARTING pcon
HARTING pcon 2120 Advantages Compact design and high power density Easy installation and tool-less connection Wide input range for world-wide use Wide operating temperature range (up to 70 C without derating)
SmartGuard 600 Controllers
SmartGuard 600 Controllers Catalog Number 1752-L24BBB Safety Reference Manual Important User Information Solid state equipment has operational characteristics differing from those of electromechanical
FACTORY AUTOMATION. MANUAL VAA-2E-G4-SE Original Instructions Version 1.1
FACTORY AUTOMATION MANUAL VAA-2E-G4-SE Original Instructions Version 1.1 With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery
Datasheet - RSS 36-D-R-ST
14.03.2018-19:30:37h Datasheet - RSS 36-D-R-ST Safety sensors / RSS 36 Thermoplastic enclosure RFID-technology for needs-based protection against tampering Misaligned actuation possible 27 mm x 108.2 mm
E-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift_NOT_Sch.tuer_Licht Safety relay for monitoring E-STOP pushbuttons, safety gates and light beam devices Approvals Gertemerkmale Positive-guided
Operating instructions AC010S Compact AS-i E-STOP safety module
Operating instructions AC010S Compact AS-i E-STOP safety module Sachnr. 7390636_/00 05/2007 Contents Safety instructions............................. 3 Installation / Setup............................
PSR-MS60. Safety relay for emergency stop, safety door and light grid monitoring. Data sheet. 1 Description
SILCL IEC 62061 Safety relay for emergency stop, safety door and light grid monitoring Data sheet 106171_en_01 PHOENIX CONTACT 2015-05-19 1 Description Intended Use The PSR-MS60 safety relay can be used
Online data sheet. FX3-XTDS84002 Flexi Soft / Safe EFI-pro System SAFETY CONTROLLERS / SAFETY SYSTEMS
Online data sheet FX3-XTDS84002 Flexi Soft / Safe EFI-pro System A B C D E F H I J K L M N O P Q R S T Detailed technical data Features Module Configuration method Safety-related parameters Ordering information
NX integrated safety System configuration. Integrated safety into machine automation
NX-S@ NX integrated safety Integrated safety into machine automation The safety controller meets Category 4, PLe according to the ISO 13849-1 and SIL3 according to the IEC 61508 Flexible system lets you
ISO SINAMICS G110D FAQ
Cover sheet Safe Torque Off (STO) of an AS-idriven SINAMICS G110D with SIL 3 in compliance with IEC 62061 or PL e in compliance with ISO 13849-1 SINAMICS G110D FAQ November 2012 Service & Support Answers
Original operating instructions Safety relay with relay outputs G1501S / / 2016
Original operating instructions Safety relay with relay outputs G50S UK 8023637 / 00 02 / 206 Contents Preliminary note...4. Symbols used...4 2 Safety instructions...5 3 Items supplied...6 4 Functions
Safety relay emergency stop/protective door, 24VDC/AC, 4 enabling paths
DATASHEET - ESR5-NO-41-24VAC-DC Safety relay emergency stop/protective door, 24VDC/AC, 4 enabling paths Part no. ESR5-NO-41-24VAC-DC Catalog No. 118701 EL-Nummer (Norway) 0004133317 Delivery program Product
Channel Digital Input Module 24 V DC High-side switching
0-0 -Channel Digital Input Module DC High-side switching 0-0 0-0... 9 0 connection 9 9 0 0 0nF 0nF The digital input module provides channels at a width of just mm (0.in). It receives binary control signals
E-STOP relays, safety gate monitors
Unit features Safety features Gertebild ][Bildunterschrift Safety relay for monitoring E-STOP pushbuttons and safety gates. Approvals Kein Gerätebild vorhanden Gertemerkmale Positive-guided relay outputs:
Compact Coded Magnetic Safety Interlock Switch and Control Units
C Conforms to EN292, EN60204-1, EN954-1, EN1088, EN60947-5-3, EN947-5-3, EN50081, EN50082, EN61000-6-2 UL and C-UL listed, TUV certified Description R US Compact Coded Magnetic Safety Interlock Switch
Connect AS-I Gateways to PC for Configuration and Troubleshooting
Network Master Simulators Connect AS-I Gateways to PC for Configuration and Troubleshooting Test and Troubleshoot Network Devices MS-DP BW1131 MS-DP BW1131 is a PROFIBUS -DP Master Simulator designed to
DIRIS A-30 Multifunction power metering & monitoring device - PMD
Single-circuit metering, measurement & analysis The solution for > Industry > Building > Infrastructures diris_986_a_us.psd Strong points Function The is a power metering and monitoring device that provides